产品简要描述及优势

产

品

简

要描述

及

优

势

Stainless steel wire mesh products are generally made of stainless steel Type 302,304,304L,316,316L,321 and 430 etc. We produce 产品详细描述

Plain Weave Stainless Steel Wire Mesh

Plain weave: Each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, every weft wire have and warp wire the same diameter.

Characteristics: square aperture ,high flow through , relative high open area, as result less pressure drop during filtration suitable for all kinds of filtration up to 63 μm.

Twill Weave Stainless Steel Wire Mesh

Twill weave: Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes

alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.We can supply the mesh from 30 mesh to 500 mesh.

Characteristics: square aperture, less rigid than plain weave,

especially suitable for deforming, strong wire cloth due to ratio of wire

diameter and aperture, it is mostly used for filtration less than 63

μm .

usage:used in petroleum,chemical industry,mine,environment protection,food

industry,paper-making,electronic industry,etc