冲压模具专业词汇中英文翻译
冲压模具词汇Counter bored hole沉孔
Chamfer倒斜角
Fillet倒圆角
padding block垫块
stepping bar垫条
upper die base上模座
lower die base下模座
upper supporting blank上承板
upper padding plate blank上垫板
spare dies模具备品
spring弹簧
bolt螺栓
document folder活页夹
file folder资料夹
to put file in order整理资料
spare tools location手工备品仓
first count初盘人
first check初盘复棹人
second count复盘人
second check复盘复核人
equipment设备
waste materials废料
work in progress product在制品
casing = containerization装箱
quantity of physical inventory second count复盘点数量
Quantity of customs count会计师盘,点数量
the first page第一联
filed by accounting department for reference会计部存查
end-user/using unit(department)使用单位
Summary of year-end physical inventory bills年终盘点截止单据汇总表
bill name单据名称
Thissheetandphysicalinventorylistwillbesenttoaccountingdepartmenttogether(T hoseofNHKwillbesenttofinancialdepartment)
本表请与盘点清册一起送会计部-(NHK厂区送财会部)
Application status records of year-end physical inventory List and physical inventory card年终盘点卡与清册使用-状况明细表blank and waste sheet NO.空白与作废单号
plate电镀
mold成型
material for engineering mold testing工程试模材料
not included in physical inventory不列入盘点
sample样品
description品名
steel/rolled steel钢材
material statistics sheet物料统计明细表
meeting minutes会议记录
meeting type会别
distribution department分发单位
location地点
chairman主席
present members出席人员
subject主题
conclusion结论
decision items决议事项
responsible department负责单位
pre-fixed finishing date预定完成日
approved by / checked by / prepared by核准/审核/承办PCE assembly production schedule sheet
PCE组装厂生产排配表
model机钟
work order工令
revision版次
remark备注
production control confirmation生产确认
checked by初审
approved by核准
department部门
Stock age analysis sheet库存货龄分析表
on-hand inventory现有库存
available material良品可使用
obsolete material良品已呆滞
to be inspected or reworked待验或重工
total合计
cause description原因说明
part number/ P/N料号
type形态
item/group/class类别
quality品质
prepared by制表
notes说明
year-end physical inventory difference analysis sheet年终盘点差异分析表physical inventory盘点数量
physical count quantity帐面数量
difference quantity差异量
cause analysis原因分析
raw materials原料
materials物料
finished product成品
semi-finished product半成品
packing materials包材
good product/accepted goods/ accepted parts/good parts良品defective product/non-good parts不良品
disposed goods处理品
warehouse/hub仓库
on way location在途仓
oversea location海外xx
spare parts physical inventory list备品盘点清单
spare molds location模具备品仓
skid/pallet栈板
tox machine自铆机
wire EDM线割
EDM放电机
coil stock卷料
sheet stock片料
tolerance工差
score=groove压线
cam block滑块
pilot导正筒
trim剪外边
pierce剪内边
drag form压锻差
pocket for the punch head挂钩槽slug hole废料xx
feature die公母模
expansion dwg展开图
radius半径
shim(wedge)楔子
torch-flame cut火焰切割
set screw止付螺丝
form block折刀
stop pin定位销
round pierce punch=die button圆冲子shape punch=die insert异形子
stock locater block定位块
under cut=scrap chopper清角
active plate活动板
baffle plate挡块
cover plate盖板
male die公模
female die母模
groove punch压线冲子
air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板bushing block衬套
insert入块
club carxx车
capability能力
parameter参数
factor系数
phosphate皮膜化成
viscosity涂料粘度
alkalidipping脱脂(degrease)main manifold主集流脉
bezel斜视规
blanking穿落模
dejecting顶固模
high-speed transmission高速传递
heat dissipation热传
rack上料
degrease脱脂
rinse水洗
alkaline etch龄咬desmut剥黑膜
D.I. rinse纯水次Chromate铬酸处理Anodize阳性处理
sealxx
revision版次
part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条形码
flow chart流程窗体assembly组装
stamping冲压
spare parts=buffer备品coordinate坐标
dismantle the die折模
auxiliary function辅助功能
poly-line多义线
heater band加热片thermocouple热电偶
sand blasting喷沙
grit砂砾
deducting machine除锈机degate打浇口
dryer烘干机
induction感应
induction light感应光
response=reaction=interaction感应ram连杆
edge finder巡边器
concave凹
convex凸
short射料不足
nick缺口
speck瑕疪
shine亮班
splay银纹
gas mark焦痕delamination起鳞
cold slug冷块
blush导色
gouge沟槽;凿槽
satin texture段面咬花witness line证示线patent专利
grit沙砾
granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金
metal plate钣金
lathe车
mill锉
plane刨
grind磨
drill钻
boring镗
blinster气泡
fillet镶;嵌边
through-hole form通孔形式voller pin formality滚针形式
cam driver铡楔
shank摸柄
crank shaft曲柄轴
angle offset角度偏差
velocity速度
production tempo生产进度现状torque扭矩
spline=the multiple keys花键quenching淬火
tempering回火
annealing退火
carbonization碳化
alloy合金
tungsten high speed steel钨高速的
moly high speed steel钼高速的organic solvent有机溶剂bracket小磁导
liaison联络单
volatile挥发性
resistance电阻
ion离子
titrator滴定仪
beacon警示灯
coolant冷却液
crusher破碎机
plain die简易模
pierce die冲孔模
forming die成型模progressive die连续模
gang dies复合模
shearing die剪边模
riveting die铆合模
pierce冲孔
forming成型(抽凸,冲凸) draw hole抽孔
bending折弯
trim切边
emboss凸点
dome凸圆
semi-shearing半剪
stamp mark冲记号
deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平
reel stretch卷圆压平groove压线
blanking下料
stamp letter冲字(料号) shearing剪断
tick-mark nearside正面压印tick-mark farside反面压印extension dwg展开图procedure dwg工程图
die structure dwg模具结构图material材质
material thickness料片厚度
factor系数
upward向上
downward向下
press specification冲床规格
die height range适用模高
die height闭模高度
burr毛边
gap间隙
weight重量
total wt.总重量
punch wt.上模重量
inner guiding post内导柱
inner hexagon screw内六角螺钉dowel pin固定销
coil spring弹簧
lifter pin顶料销
eq-height sleeves=spool等高套筒pin销
lifter guide pin浮升导料销guide pin导正销
wire spring圆线弹簧
outer guiding post外导柱stop screw止付螺丝located pin定位销
outer bush外导套
top platexx托板(顶板)top blockxx垫脚
punch set上模座
punch padxx垫板
punch holderxx夹板stripper pad脱料背板
up stripper上脱料板male die公模(凸模) feature die公母模female die母模(凹模) upper platexx模板
lower plate下模板
die pad下垫板
die holder下夹板
die set下模座
bottom block下垫脚bottom plate下托板(底板)
stripping plate内外打(脱料板)
outer stripper外脱料板
inner stripper内脱料板
lower stripper下脱料板
punch冲头
insert入块(嵌入件)
deburring punch压毛边冲子
groove punch压线冲子
stamped punch字模冲子
round punch圆冲子
special shape punch异形冲子
bending block折刀
roller滚轴
baffle plate挡块
located block定位块
supporting block for location定位支承块
air cushion plate气垫板
air-cushion eject-rod气垫顶杆
trimming punch切边冲子
stiffening rib punch = stinger加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子
guide plate定位板
plain die简易模
pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔
forming成型(抽凸,冲凸) draw hole抽孔bending折弯
trim切边
emboss凸点
dome凸圆
semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平
groove压线
blanking下料
stamp letter冲字(料号) shearing剪断
tick-mark nearside正面压印tick-mark farside反面压印extension dwg展开图procedure dwg工程图
die structure dwg模具结构图material材质
material thickness料片厚度factor系数
upward向上
downward向下
press specification冲床规格die height range适用模高die height闭模高度
burr毛边
gap间隙
weight重量
total wt.总重量
punch wt.上模重量
air vent vale通气阀anchor pin锚梢angular pin角梢baffle调节阻板angular pin倾斜梢baffle plate折流档板ball button球塞套
ball plunger定位球塞ball slider球塞滑块binder plate压板blank holder防皱压板blanking die落料冲头bolster上下模板bottom board浇注底板bolster垫板
bottom plate下固定板bracket托架
bumper block缓冲块buster堵口
casting ladle浇注包
casting lug铸耳
cavity模穴(模仁)
cavity retainer plate模穴托板center pin中心梢
clamping block锁定块
coil spring螺旋弹
cold punched nut冷冲螺母cooling spiral螺旋冷却栓
core心型
core pin心型梢
cotter开口梢
cross十字接头
cushion pin缓冲梢diaphragm gate盘形浇口
die approach模头料道
die bed型底
die block块形模体
die body铸模座
die bush合模衬套
die button冲模母模全球模具网die clamper夹模器
大学各专业名称英文翻译—— 文科方面 ARTS
大学各专业名称英文翻译——文科方面ARTS 澳门历史研究Study of the History of Macao 办公管理Office Management 办公设备运用Using Desktop Publishing in Business 比较管理学Comparative Management 比较诗学Comparative Poetics 比较文化学Comparative Cult urology 比较文学研究Study of Comparative Literature 必修课4-10学分Restricted (4-10 Credits needed) 病理生理学Pathological Physiology 财务报告介绍An Introduction to Financial Accounting Statements 财务报告运用Using Financial Accounting Statements 财务管理学Financial Management 财务会计学Financial Accounting 财务理论与方法Finance Theory & Methods 财政与金融Finance 财政与金融学研究Study of Finance 财政预算Preparing Financial Forecasts 产业经济学Industrial Economics 传统文化与现代化Tradition Culture and Modernization 当代国际关系研究Contemporary International Relations Studies 当代世界发展研究Contemporary World Development Studies 当代中国外交与侨务专题研究Monographic Studies of Diplomacy and Overseas C hinese Affairs of Contemporary China
冲压模具专业词汇中英文翻译
Counter bored hole 沉孔 Chamfer 倒斜角 Fillet 倒圆角 padding block垫块 stepping bar垫条 upper die base上模座 lower die base下模座 upper supporting blank上承板 upper padding plate blank上垫板 spare dies模具备品 spring 弹簧 bolt螺栓 document folder活页夹 file folder资料夹 to put file in order整理资料 spare tools location手工备品仓 first count初盘人 first check初盘复棹人 second count 复盘人 second check复盘复核人 equipment设备 waste materials废料 work in progress product在制品 casing = containerization装箱 quantity of physical inventory second count 复盘点数量 Quantity of customs count 会计师盘,点数量 the first page第一联 filed by accounting department for reference会计部存查 end-user/using unit(department)使用单位 Summary of year-end physical inventory bills 年终盘点截止单据汇总表 bill name单据名称 This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department) 本表请与盘点清册一起送会计部-(NHK厂区送财会部) Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用-状况明细表 blank and waste sheet NO. 空白与作废单号
太阳能光伏术语(中英文对照)
太阳光伏能源系统名词术语(中英问对照) 令狐采学 本标准规定了太阳光伏能源系统的名词术语。其中包括:一般术语,光伏特性和光伏转换术语,结构和系统术语,标定和测试术语以及工艺术语等五部分。 一般术语 1、太阳光伏能源系统 solar photovoltaic energy system 系指利用太阳电池的光生伏特效应,将太阳能直接转换成电能的发电系统。 1.2 大气质量(AM) Air Mass (AM) 直射阳光光束透过大气层所通过的路程,以直射太阳光束从天顶到达海平面所通过的路程的倍数来表示。 当大气压力P=1.013巴,天空无云时,海平面处的大气质量为1。在任何地点,大气质量的值可以从以下公式算出: P 1 大气质量= ———— X ———— Po sinθ 其中,P为当地的大气压力,以巴表示。 Po 等于1.013巴 θ为太阳高度角
1.3 太阳电池 solar cell 通常是指将太阳光能直接转换成电能的一种器件。 1.4 硅太阳电池 silicon solar cell 硅太阳电池是以硅为基体材料的太阳电池。 1.5 单晶硅太阳电池 single crystalline silicon solar cell 单晶硅太阳电池是以单晶硅为基体材料的太阳电池。 1.6 非晶硅太阳电池(a—si太阳电池) amorphous silicon solar cell 用非晶硅材料及其合金制造的太阳电池称为非晶硅太阳电池,亦称无定形硅太阳电池,简称a—si太阳电池。 1.7 多晶硅太阳电池 polycrystalline silicon solar cell 多晶硅太阳电池是以多晶硅为基体材料的太阳电池。 1.8 聚光太阳电池组件 photovoltaic concentrator module 系指组成聚光太阳电池,方阵的中间组合体,由聚光器、太阳电池、散热器、互连引线和壳体等组成。 1.9 聚光太阳电池方阵场 photo-voltaic concentrator array field
大学各专业名称英文翻译(一)——工学_ENGINEERING
大学各专业名称英文翻译(一)——工学ENGINEERING 课程中文名称课程英文名称 高等数理方法Advanced Mathematical Method 弹塑性力学Elastic-Plastic Mechanics 板壳理论Theory of Plate and Shell 高等工程力学Advanced Engineering Mechanics 板壳非线性力学Nonlinear Mechanics of Plate and Shell 复合材料结构力学Structural Mechanics of Composite Material 弹性元件的理论及设计Theory and Design of Elastic Element 非线性振动Nonlinear Vibration 高等土力学Advanced Soil Mechanics 分析力学Analytic Mechanics 随机振动Random Vibration 数值分析Numerical Analysis 基础工程计算与分析Calculation and Analysis of Founda tion Engineering 结构动力学Structural Dynamics 实验力学Laboratory Mechanics 损伤与断裂Damage and Fracture 小波分析Wavelet Analysis 有限元与边界元分析方法Analytical Method of Finite Element and Boundary Element 最优化设计方法Optimal Design Method 弹性力学Elastic Mechanics 高层建筑基础Tall Building Foundation 动力学Dynanics 土的本构关系Soil Constitutive Relation 数学建模Mathematical Modeling 现代通信理论与技术Emerging Communications Theory and Technology 数字信号处理Digital Signal Processing 网络理论与多媒体技术Multi-media and Network Technology 医用电子学Electronics for Medicine 计算微电子学Computational Microelectronics 集成电路材料和系统电子学Material and System Electronics for In tegrated Circuits 网络集成与大型数据库Computer Network Integrating Technology and Large scale Database 现代数字系统Modern Digital System 微机应用系统设计Microcomputer Application Design 计算机网络新技术Modern Computer Network Technologies 网络信息系统Network Information System 图像传输与处理Image Transmission and Processing 图像编码理论Theory of Image Coding 遥感技术Remote Sensing Techniques 虚拟仪器系统设计Design of Virtual Instrument System 生物医学信号处理技术Signal Processing for Biology and Medicine 光纤光学Fiber Optics
冲压模具专业词汇中英文翻译
冲压模具词汇 Counter bored hole 沉孔 Chamfer 倒斜角 Fillet 倒圆角 padding block垫块 stepping bar垫条 upper die base上模座 lower die base下模座 upper supporting blank上承板 upper padding plate blank上垫板 spare dies模具备品 spring 弹簧 bolt螺栓 document folder活页夹 file folder资料夹 to put file in order整理资料 spare tools location手工备品仓 first count初盘人 first check初盘复棹人 second count 复盘人 second check复盘复核人 equipment设备 waste materials废料 work in progress product在制品 casing = containerization装箱 quantity of physical inventory second count 复盘点数量 Quantity of customs count 会计师盘,点数量 the first page第一联 filed by accounting department for reference会计部存查 end-user/using unit(department)使用单位 Summary of year-end physical inventory bills 年终盘点截止单据汇总表 bill name单据名称 This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department) 本表请与盘点清册一起送会计部-(NHK厂区送财会部) Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用-状况明细表
光伏系统中英文对照
太阳能光伏系统专业词汇中英对照顺德中山大学太阳能研究院罗宇飞孙韵琳 一、太阳电池相关词汇 太阳电池 solar cell 将太阳辐射能直接转换成电能的器件 单晶硅太阳电池 single crystalline silicon solar cell 以单晶硅为基体材料的太阳电池 多晶硅太阳电池 multi crystalline silicon solar cell 以多晶硅为基体材料的太阳电池 非晶硅太阳电池 amorphous silicon solar cell 用非晶硅材料及其合金制造的太阳电池。
薄膜太能能电池 Thin-film solar cell 用硅、硫化镉、砷化镓等薄膜为基体材料的太阳电池。这些薄膜通常用辉光放电、化学气相淀积、溅射、真空蒸镀等方法制得。 多结太阳电池multijunction solar cell 由多个p‐n 结形成的太阳电池。 化合物半导体太阳电池compound semiconductor solar cell 用化合物半导体材料制成的太阳电池 带硅太阳电池silicon ribbon solar cell 用带状硅制造的太阳电池 光电子photo-electron 由光电效应产生的电子。 太阳电池的伏安特性曲线 I-V characteristic curve of solar cell
受光照的太阳电池,在一定的辐照度和温度以及不同的外电路负载下,流入的电流I 和电池端电压V 的关系曲线。 短路电流short-circuit current (Isc) 在一定的温度和辐照度条件下,光伏发电器在端电压为零时的输出电流。 开路电压open-circuit voltage (Voc) 在一定的温度和辐照度条件下,光伏发电器在空载(开路)情况下的端电压。最大功率maximum power (Pm) 在太阳电池的伏安特性曲线上,电流电压乘积的最大值。 最大功率点maximum power point 在太阳电池的伏安特性曲线上对应最大功率的点,亦称最佳工作点。 最佳工作点电压optimum operating voltage (Vn) 太阳电池伏安特性曲线上最大功率点所对应的电压。 最佳工作点电流optimum operating current (In) 太阳电池伏安特性曲线上最大功率点所对应的电流。 填充因子fill factor(curve factor) 太阳电池略去串联电阻和并联电阻之后,最大功率与开路电压和短路电流乘积之比。评估太阳电池负载能力的重要参数。FF=(Im×Vm)/(Isc×Voc) 其中:Isc—短路电流,Voc—开路电压,Im—最佳工作电流,Vm—最佳工作电压;曲线修正系数curve correction coefficient 测试太阳电池电池时,由于温度的不同而引起伏安特性曲线的变化,修正此项变化的系数称曲线修正系数。 太阳电池温度solar cell temperature 太阳电池中势垒区的温度。 串联电阻series resistance 太阳电池内部的与p‐n 结或MIS 结等串联的电阻,它是由半导体材料体电阻、薄层电阻、电极接触电阻等组成。 并联电阻shunt resistance 太阳电池内部的、跨连在电池两端的等效电阻。 转换效率cell efficiency 受光照太阳电池的最大功率与入射到该太阳电池上的全部辐射功率的百分比。暗电流dark current 在光照情况下,产生于太阳电池内部与光生电流方向相反相成的正向结电流。
(完整版)冲压类外文翻译、中英文翻译冲压模具设计
附件1:外文资料翻译译文 冲压模具设计 对于汽车行业与电子行业,各种各样的板料零件都是有各种不同的成型工艺所生产出来的,这些均可以列入一般种类“板料成形”的范畴。板料成形(也称为冲压或压力成形)经常在厂区面积非常大的公司中进行。 如果自己没有去这些大公司访问,没有站在巨大的机器旁,没有感受到地面的震颤,没有看巨大型的机器人的手臂吧零件从一个机器移动到另一个机器,那么厂区的范围与价值真是难以想象的。当然,一盘录像带或一部电视专题片不能反映出汽车冲压流水线的宏大规模。站在这样的流水线旁观看的另一个因素是观看大量的汽车板类零件被进行不同类型的板料成形加工。落料是简单的剪切完成的,然后进行不同类型的加工,诸如:弯曲、拉深、拉延、切断、剪切等,每一种情况均要求特殊的、专门的模具。 而且还有大量后续的加工工艺,在每一种情况下,均可以通过诸如拉深、拉延与弯曲等工艺不同的成形方法得到所希望的得到的形状。根据板料平面的各种各样的受应力状态的小板单元体所可以考虑到的变形情形描述三种成形,原理图1描述的是一个简单的从圆坯料拉深成一个圆柱水杯的成形过程。 图1 板料成形一个简单的水杯
拉深是从凸缘型坯料考虑的,即通过模具上冲头的向下作用使材料被水平拉深。一个凸缘板料上的单元体在半径方向上被限定,而板厚保持几乎不变。板料成形的原理如图2所示。 拉延通常是用来描述在板料平面上的两个互相垂直的方向被拉长的板料的单元体的变形原理的术语。拉延的一种特殊形式,可以在大多数成形加工中遇到,即平面张力拉延。在这种情况下,一个板料的单元体仅在一个方向上进行拉延,在拉长的方向上宽度没有发生变化,但是在厚度上有明确的变化,即变薄。 图2 板料成形原理 弯曲时当板料经过冲模,即冲头半径加工成形时所观察到的变形原理,因此在定向的方向上受到改变,这种变形式一个平面张力拉长与收缩的典型实例。 在一个压力机冲程中用于在一块板料上冲出一个或多个孔的一个完整的冲压模具可以归类即制造商标准化为一个单工序冲孔模具,如图3所示。
太阳能光伏系统专业词汇中英对照
太阳电池 solar cell 将太阳辐射能直接转换成电能的器件 单晶硅太阳电池 single crystalline silicon solar cell 以单晶硅为基体材料的太阳电池 多晶硅太阳电池 so multi crystalline silicon solar cell 以多晶硅为基体材料的太阳电池 非晶硅太阳电池 amorphous silicon solar cell 用非晶硅材料及其合金制造的太阳电池。 薄膜太能能电池 Thin-film solar cell 用硅、硫化镉、砷化镓等薄膜为基体材料的太阳电池。这些薄膜通常用辉光放电、化学气相淀积、溅射、真空蒸镀等方法制得。 多结太阳电池multijunction solar cell 由多个p‐n 结形成的太阳电池。 化合物半导体太阳电池compound semiconductor solar cell 用化合物半导体材料制成的太阳电池 带硅太阳电池silicon ribbon solar cell 用带状硅制造的太阳电池 光电子photo-electron 由光电效应产生的电子。 太阳电池的伏安特性曲线 I-V characteristic curve of solar cell 受光照的太阳电池,在一定的辐照度和温度以及不同的外电路负载下,流入的电流I 和电池端电压V 的关系曲线。 短路电流short-circuit current (Isc) 在一定的温度和辐照度条件下,光伏发电器在端电压为零时的输出电流。 开路电压open-circuit voltage (Voc) 在一定的温度和辐照度条件下,光伏发电器在空载(开路)情况下的端电压。 最大功率maximum power (Pm) 在太阳电池的伏安特性曲线上,电流电压乘积的最大值。 最大功率点maximum power point 在太阳电池的伏安特性曲线上对应最大功率的点,亦称最佳工作点。 最佳工作点电压optimum operating voltage (Vn) 太阳电池伏安特性曲线上最大功率点所对应的电压。 最佳工作点电流optimum operating current (In) 太阳电池伏安特性曲线上最大功率点所对应的电流。 填充因子fill factor(curve factor) 太阳电池略去串联电阻和并联电阻之后,最大功率与开路电压和短路电流乘积之 比。评估太阳电池负载能力的重要参数。FF=(Im×Vm)/(Isc×Voc)
国内科研项目名称英文翻译
国内项目英文翻译 国家高技术研究发展计划资助项目(863计划), Supported by the N ational High Technology Research and Development Program of China (863 Program), 国家自然科学基金资助项目, Supported by the National Natural Science Foundat ion of China, 国家“九五”攻关项目, Supported by the National Key Technologies Research and Development Program of China during the 9th Five-Year Plan Period , 中国科学院“九五”重大项目, Supported by the Major Programs of the Chinese Academy of Sciences during the 9th Five-Year Plan Period , 中国科学院重点资助项目, Supported by the Key Programs of the Chinese Academy of Sciences, “九五”国家医学科技攻关基金资助项目, Supported by the National Medical Science and Technique Foundation during the 9th Five-Year Plan Period, 江苏省科委应用基础基金资助项目, Supported by the Applied Basic Research Programs of Science and Tec hnology Commission Foundation of Jiangsu Province, 国家教育部博士点基金资助项目, Supported by the Ph. D. Programs Foundat ion of Ministry of Educat ion of China, 中国科学院上海分院择优资助项目, Supported by the Advanced Programs of Shanghai Branch, the Chinese Academy of Sciences, 国家重点基础研究发展计划(973计划), Supported by the Major State Basic Research Development Program of China (973 Program), 国家杰出青年科学基金, Supported by National Science Fund for Dist inguished Young Scholars , 海外香港青年学者合作研究基金, Supported by Abroad Joint Research Fund for Young Scholars of Hong Kong ,
光电传感器(中英文对照版)
如对您有帮助,请购买打赏,谢谢您! Photoelectric sensor Key word: photoelectric effect photoelectric element photoelectric sensor classification sensor application characteristics . Abstract: in the rapid development of science and technology in the modern society, mankind has into the rapidly changing information era, people in daily life, the production process, rely mainly on the detection of information technology by acquiring, screening and transmission, to achieve the brake control, automatic adjustment, at present our country has put detection techniques listed in one of the priority to the development of science and technology. Because of microelectronics technology, photoelectric semiconductor technology, optical fiber technology and grating technical development makes the application of the photoelectric sensor is growing. The sensor has simple structure, non-contact, high reliability, high precision, measurable parameters and quick response and more simple structure, form etc, and flexible in automatic detection technology, it has been widely applied in photoelectric effect as the theoretical basis, the device by photoelectric material composition. Text: First, theoretical foundation - photoelectric effect Photoelectric effect generally have the photoelectric effect, optical effect, light born volts effect. The light shines in photoelectric material, according to the electronic absorption material surface energy, if absorbed energy large enough electronic electronic will overcome bound from material surface and enter the outside space, which changes photoelectron materials, this kind of phenomenon become the conductivity of the photoelectric effect According to Einstein's photoelectron effect, photon is moving particles, each photon energy for hv (v for light frequency, h for Planck's constant, h = 6.63 * 10-34 J/HZ), thus different frequency of photons have different energy, light, the higher the frequency, the photon energy is bigger. Assuming all the energy photons to photons, electronic energy will increase, increased energy part of the fetter, positive ions used to overcome another part of converted into electronic energy. According to the law of conservation of energy: Type, m for electronic quality, v for electronic escaping the velocity, A microelectronics the work done. From the type that will make the optoelectronic cathode surface escape the necessary conditions are h > A. Due to the different materials have different escaping, so reactive to each kind of cathode materials, incident light has a certain frequency is restricted, when the frequency of incident light under this frequency limit, no matter how the light intensity, won't produce photoelectron launch, this frequency limit called "red limit". The corresponding wavelength for type, c for the speed of light, A reactive for escaping. A -h m 212νν=
大学各个专业名称的英文翻译
中文学科、专业名称英文学科、专业名称哲学Philosophy 哲学Philosophy 马克思主义哲学Philosophy of Marxism xx 哲学Chinese Philosophy xx 哲学Foreign Philosophies 逻辑学Logic 伦理学Ethics 美学Aesthetics 宗教学Science of Religion 科学技术哲学Philosophy of Science and Technology 经济学Economics 理论经济学Theoretical Economics 政治经济学Political Economy 经济思想史History of Economic Thought 经济史History of Economic
西方经济学Western Economics 世界经济World Economics 人口、资源与环境经济学Population, Resources and Environmental Economics 应用经济学Applied Economics 国民经济学National Economics 区域经济学Regional Economics 财政学(含税收学) Public Finance (including Taxation) 金融学(含保险学) Finance (including Insurance) 产业经济学Industrial Economics 国际贸易学International Trade 劳动经济学Labor Economics 统计学Statistics 数量经济学Quantitative Economics 中文学科、专业名称英文学科、专业名称 国防经济学National Defense Economics
电工常用词汇中英文翻译
电工常用词汇中英文翻译 ] 电路的基本概念及定律 电源source 电压源voltage source 电流源current source 理想电压源ideal voltage source 理想电流源ideal current source 伏安特性volt-ampere characteristic 电动势electromotive force 电压voltage 电流current 电位potential 电位差potential difference 欧姆Ohm 伏特Volt 安培Ampere 瓦特Watt 焦耳Joule 电路circuit 电路元件circuit element 电阻resistance 电阻器resistor 电感inductance 电感器inductor 电容capacitance 电容器capacitor 电路模型circuit model 参考方向reference direction 参考电位reference potential 欧姆定律Ohm’s law 基尔霍夫定律Kirchhoff’s law 基尔霍夫电压定律Kirchhoff’s voltage law(KVL) 基尔霍夫电流定律Kirchhoff’s current law(KCL) 结点node 支路branch 回路loop 网孔mesh 支路电流法branch current analysis 网孔电流法mesh current analysis
结点电位法node voltage analysis 电源变换source transformations 叠加原理superposition theorem 网络network 无源二端网络passive two-terminal network 有源二端网络active two-terminal network 戴维宁定理Thevenin’s theorem 诺顿定理Norton’s theorem 开路(断路)open circuit 短路short circuit 开路电压open-circuit voltage 短路电流short-circuit current 交流电路 直流电路direct current circuit (dc) 交流电路alternating current circuit (ac) 正弦交流电路sinusoidal a-c circuit 平均值average 有效值effective 均方根值root-mean-squire (rms) 瞬时值instantaneous 电抗reactance 感抗inductive reactance 容抗capacitive reactance 法拉Farad 亨利Henry 阻抗impedance 复数阻抗complex impedance 相位phase 初相位initial phase 相位差phase difference 相位领先phase lead 相位落后phase lag 倒相,反相phase inversion 频率frequency 角频率angular frequency 赫兹Hertz 相量phasor 相量图phasor diagram 有功功率active power 无功功率reactive power 视在功率apparent power 功率因数power factor 功率因数补偿power-factor compensation
专业名称中英文对照
公司企业常见部门名称英文翻译 总公司 Head Office 分公司 Branch Office 营业部 Business Office 人事部 Personnel Department (人力资源部)Human Resources Department 总务部 General Affairs Department 财务部 General Accounting Department 销售部 Sales Department 促销部 Sales Promotion Department 国际部 International Department 出口部 Export Department 进口部 Import Department 公共关系 Public Relations Department 广告部 Advertising Department 企划部 Planning Department 产品开发部 Product Development Department 研发部 Research and Development Department(R&D) 秘书室 Secretarial Pool 交通标志专用名词中英对照 警告标志 || Warning sign 禁令标志 || Prohibition sign 指示标志 || Mandatory sign 指路标志 || Guide sign 旅游标志 || Tourist sign 标线 || Marking 禁止超越线 || No-passing line 大型车 || Oversize vehicle 小型车 || Light-duty vehicle 自行车 || Bicycle 非机动车 || Non-motor vehicle 公共汽车 || Bus 机动车 || Motor vehicle 公共汽车优先 || Bus preemption,Bus priority 行车道 || Roadway,carriageway 超车道 || Overtaking lane 硬路肩/隔离墩 || Hard shoulder 国道 || National road
光电词汇中英文翻译
拼版烘烤:PCB/FPC baking 锡膏印刷:Solder printing 锡膏印刷检查:printing inspection 贴片:component mount 贴片检查:mount inspection 回流焊:reflow 回流焊检查或补焊:reflow inspection and repair FPC裁切:FPC singulation 晶圆清洗:wafer cleaning 等离子清洗:plasma cleaning 芯片贴附:Die attach 芯片贴附烘烤:D/A baking 邦线:wire bonding 邦线清洗:wire bonding cleaning 镜座检查: holder inspection 镜座贴附:holder attach 芯片检查:chip inspection 预热:preheat 镜座贴附烘烤:holder attach baking 镜头检查:holder inspection 镜头组装:lens assembly 模组分离:cube separation 热压:heat bonding 软板补强:FPC bending strengthen 削毛边:bur cutting 调焦:focus UV点胶:UV dispenser (ultraviolet) 振动:vibration 成品检验:function test 成品外观检查:visual inspection 包装辅助:package 出货检验:OQC 超声波清洗:ultrasonic and centrifugal cleaning 贴保护膜:film attach 撕保护膜:film tearing ISP元器件底部填胶:glue filling under ISP 马达驱动芯片封胶:chip glue sealing of motor drive 烧录:shading 分辨率:resolution Lens shading Color shading Tv distortion: 畸变 Flare and ghost:杂光,鬼影 Auto white balance:(AWB)自动白平衡
各种专业名称英语词汇中英文对照表
各种专业名称英语词汇中英文对照表
————————————————————————————————作者: ————————————————————————————————日期: ?
各种专业名称英语词汇中英文对照表 哲学Philosophy 马克思主义哲学Philosophy of Marxism 中国哲学ChinesePhilosophy 外国哲学ForeignPhilosophies ?逻辑学Logic?伦理学Ethics 美学Aesthetics 宗教学Science of Religion?科学技术哲学Philosophy of Science andTechnology?经济学Economics?理论经济学Theoretical Economics ?政治经济学PoliticalEconomy ?经济思想史History ofEconomic Thought ?经济史History of Economic 西方经济学WesternEconomics?世界经济World Economics ?人口、资源与环境经济学Population,Resources andEnvironmentalEconomics 应用经济学Applied Economics 国民经济学National Economics?区域经济学Regional Economics ?财政学(含税收学)Public Finance (includingTaxation) 金融学(含保险学) Finance (including Insurance)?产业经济学Industrial Economics ?国际贸易学International Trade 劳动经济学Labor Economics ?统计学Statistics ?数量经济学Quantita tive Economics ?中文学科、专业名称英文学科、专业名称 国防经济学National Defense Economics?法学Law 法学Science of Law ?法学理论Jurisprudence?法律史Legal History ?宪法学与行政法学Constitutional Law and Administrative Law 刑法学Criminal Jurisprudence 民商法学(含劳动法学、社会保障法学)Civil Law and Commercial Law (i ncluding Science of LabourLawand Science ofSocial Sec urityLaw)?诉讼法学Science of ProcedureLaws ?经济法学Sc ience ofEconomic Law ?环境与资源保护法学Science ofEnvironment andNatural Resources Protection Law 国际法学(含国际公法学、国际私法学、国际经济法学、)Internationallaw (including International Public law, International PrivateLaw a