机械研究生复试必备英语自我介绍和万能模版
机械专业面试英语自我介绍
Good morning, my dear professors!
It is my great honor to take this interview. Thank you very much for giving me the chance!
My name is Yan li，I come from Liao ning Province , I am 23 years old. I am an undergraduate of Shandong University at Qingdao .My major is Mechanical design manufacturing and automation. The beautiful campus sceneries provide me an excellent study environment. After about three years’ hard work, I have learned most of the courses of my specialty and also do well in them.
During the past 3 years in the university, as an undergraduate student, I have been working diligently at my specialty. I have built up a solid foundation for professional knowledge and comprehensively improved my quality. I got a lot of scholarships, once I feel I fall behind others, I will find the reason as soon as possible and try my utmost to catch up with them. And just owning to this, I could concentrate on my study and succeeded in the end. I am confident that my solid
education background will lay me a foundation to fulfill my bachelor degree courses!
In my spare time, I like to read books, listen to Pop music, watch movies and doing sports. In all sports , volleyball is my favorite. They keep me in good health, full of energy and breed optimism towards life. Besides, I really enjoy watching English films. It can not only kill time, but also excise my listening skills. I know my English is not good enough, and I will continue to study.
I have learnt a lot from it not only how to do research , but also team sprit and how to communication with others .So I love my major. I am long for doing research in this field. However, I think further study is urgent for me to realize my dream. I think the postgraduate study can enrich my knowledge and make the competence in my future career.
All in all, Shandong University at Weihai, with a highly qualified faculty and strong academic environment is the university I have long stayed for four years. I believe that I am
a very qualified applicant for admission into your Master of Petroleum Engineering and can contribute to the enrichment or diversity of our university. I hope I could get the opportunity to finish my postgraduate courses in it. I have the confidence because I have such ability! I am a girl who is fervent, outgoing and creative. At the same time, I think I am quick in mind and careful in everything. I am looking forward to my postgraduate studies and life. I will soon prove that your decision of choosing me is the wisest. Thank you for giving me such a valuable opportunity!
That' all. Thank you for your attention!
二（通用）
Good morning. I am glad to be here for this interview. My name is Li Ming. I come from Chang Chun, the capital of Ji Lin Province. I will graduate from Department of Finance of Ji Lin University in the coming June.
I am open-minded, quick in thought and very fond of traveling. In my spare time, I have broad interests like many other youngsters. I like reading books, especially those about Chinese history. Frequently I exchange with other people by making comments in the forum on line. In addition, during my college years, I was once a Net-bar technician. So, I have a good command of network application.
I always believe that one will easily lag behind unless he keeps on learning. Of course, if I am given a chance to further my education in this famous University, I will spare no effort to master the latest knowledge in my field and make good preparation for my future profession.
机械类常用英语词汇大全
机械类常用英语词汇大全 一字螺丝批 slot type screwdriver 一点透视 one-point perspective 二画 二合一黏合剂 epoxy resin adhesive 二合胶；混合胶 epoxy glue 二维的；平面的 two-dimensional 二进制 binary 二极管；整流子 diode 二号螺丝攻 second tap 二路开关 two-way switch 十进制的；公制的 metric 人工制品 artefact 人造板 man-made board 人体工程学 ergonomics; human engineering 人体尺寸 human dimension 人体测量学 anthropometry; anthropometrics 刀片 blade 刀身 blade 刀具 tool 刀具溜座 carriage 刀柱 tool post 刀架 tool rest 刀架底座 tool rest bracket 刀座帷；床鞍 apron 刀座鞍；溜板座 saddle 力 force 力三角形 triangle of force 力平行四边形 parallelogram of force 力多边形；多边形力学 polygon of force 力的分解 force resolution 力架；亮漆 lacquer 力矩 moment 力偶 couple 力矩定律 law of moment 力-距离图表 force-distance graph 力图 force diagram 力线 line of force 力点 effort 十字榫 cross halving joint 十字螺丝 Philip s head screw 十字螺丝批 Philip s type screwdriver 丁字尺；T 尺 tee square 三画 三爪夹头 three-jaw chuck 三角尺 set square 三角形结构系杆 triangulation tie 三角锉 triangular file 三维的；立体的 three-dimensional 三氯甲烷；哥罗芳 chloroform 三聚氰胺；蜜胺 melamine 三点透视 three-point perspective 上油漆 painting 上釉 enamelling 凡立水 varnish 叉形顶尖 fork centre 口罩 mask 士力；虫漆 shellac 士巴拿；扳手 spanner 大芯夹板；宽条芯夹板 blockboard; solid corestock-laminated board 大量制造 mass production
研究生复试英语自我介绍模板2篇
研究生复试英语自我介绍模板2篇 如果你只是一个安静平凡的学渣，请用这篇。 Dear Professors： It is my great pleasure to be here. My name is __姓名__, graduated from __专业__ Department of __本科院校__ University. During my four-year study in the university as an under-graduate student, I have built up a solid foundation of professional knowledge, as well as a rich experience of social activities. I am a determined person, always willing to achieve higher goals. Whats more, I am good at analysis, with a strong sense of cooperation. All of these led me to the success of passing the first round of the entrance examination to the Masters degree. Personally, I am very humorous and easy-going, enjoying a good relationship among my classmates. In my spare time, I like to read books regarding how to be myself and how to deal with problems. Music and movies are my favorite entertainments. As for my sport interest, I could not deny my greatest interest is football. Playing this game brings me a lot of glory, happiness and passion. All in all, __目标院校__ University, with a highly qualified faculty and strong academic environment is the university I have long admired. I believe that I am a very qualified applicant for admission into your Master of __目标专业__ and can contribute to the enrichment or diversity of your university. THANK YOU FOR YOUR ATTENTION!(239 words) 如果你是一个闪瞎导师眼的学霸，请用这篇。 Good morning. I am very glad to be here for this interview.
考研英语口语复试自我介绍
考研英语口语复试自我介绍 一，英语自我介绍一定要背。 英语的自我介绍，考生最好提前准备好，并熟背于心。如果在自我介绍时，显得很不流利，就说明他的口语肯定很差。另外，在自我介绍时要很自然，参加考研复试的考官，一般应该是在40岁上下年纪的中年人，作为考生，最好把握他们的心态，他们应该都是吃过苦的一些人，所以考生在做自我介绍的时候，表现不要很强势。你可以把自己定为一个弱势群体，这个有很大的好处，但最重要的考生要紧紧围绕导师所感兴趣的东西来回答。 二，英语提问灵活应对。 导师提问这块没有一个具体的标准，导师临场会问很多问题，下面为考生介绍两类：一类是考生个人信息。这个考生一定要准备全面，比如说你的个人经历，成功经历，失败经历，这个很重要。再比如你的个人梦想，打算，读研的计划，甚至你的家乡，你的家人，大学生活，本科学校的情况，还比如你是换专业考试的，为什么换专业考试?你没换专业的，你对这个专业有什么认识，他会问到很多类似这样的问题，关于个人的信息一定要准备好，一定不要临时去想，因为临时想很难组织语言，除非你的口语特别厉害，没有一个人能做到这一点，临时想得很完美。 另一类导师可能会问一些专业类的问题。用英语问专业的问题，这种问题怎么回答?这种问题确实难度比较高，比如你学数学专业的，或者理科物理的，他问专业的，你很可能这个词都不认识，这怎么办呢?用英语问专业问题，没有一个老师会期待你有一个很好的回答，因为老师知道一个本科生是没有办法用英语来表述专业问题的。基本上大家都跟你一样的，不会回答的很好。不过，同学们只要动脑筋，用智慧，在参加复试之前的时候，一定要自己用英语准备至少三个专业的问题以及它的回答就没有太大的问题了。套用一位过来人的话：“英语口试先是自我介绍，老师主要是根据你的自我介绍的内容来挖掘问题，或者根据当时情景来和你进行简短的对话，看看你有没有应用外语和别人沟通的能力。” 自我介绍是英语复试中很重要的一部分，精彩自信的自我介绍绝对可以加分不
《机械工程专业英语教程》课文翻译
Lesson 1 力学的基本概念 1、词汇： statics [st?tiks] 静力学；dynamics动力学；constraint约束；magnetic [m?ɡ＇netik]有磁性的；external [eks＇t?:nl] 外面的, 外部的；meshing啮合；follower从动件；magnitude [＇m?ɡnitju:d] 大小；intensity强度，应力；non-coincident [k?u＇insid?nt]不重合；parallel [＇p?r?lel]平行；intuitive 直观的；substance物质；proportional [pr?＇p?:??n?l]比例的；resist抵抗，对抗；celestial [si＇lestj?l]天空的；product乘积；particle质点；elastic [i＇l?stik]弹性；deformed变形的；strain拉力；uniform全都相同的；velocity[vi＇l?siti]速度；scalar[＇skeil?]标量；vector[＇vekt?]矢量；displacement代替；momentum [m?u＇ment?m]动量； 2、词组 make up of由……组成；if not要不，不然；even through即使，纵然； Lesson 2 力和力的作用效果 1、词汇： machine 机器；mechanism机构；movable活动的；given 规定的，给定的，已知的；perform执行；application 施用；produce引起，导致；stress压力；applied施加的；individual单独的；muscular [＇m?skjul?]]力臂；gravity[ɡr?vti]重力；stretch伸展，拉紧，延伸；tensile[tensail]拉力；tension张力，拉力；squeeze挤；compressive 有压力的，压缩的；torsional扭转的；torque转矩；twist扭，转动；molecule [m likju:l]分子的；slide滑动; 滑行；slip滑，溜；one another 互相；shear剪切；independently独立地，自立地；beam梁；compress压；revolve (使)旋转；exert [iɡ＇z?:t]用力，尽力，运用，发挥，施加；principle原则, 原理，准则，规范；spin使…旋转；screw螺丝钉；thread螺纹； 2、词组 a number of 许多；deal with 涉及，处理；result from由什么引起；prevent from阻止，防止；tends to 朝某个方向；in combination结合；fly apart飞散； 3、译文： 任何机器或机构的研究表明每一种机构都是由许多可动的零件组成。这些零件从规定的运动转变到期望的运动。另一方面，这些机器完成工作。当由施力引起的运动时，机器就开始工作了。所以，力和机器的研究涉及在一个物体上的力和力的作用效果。 力是推力或者拉力。力的作用效果要么是改变物体的形状或者运动，要么阻止其他的力发生改变。每一种
机械专业英语词汇汇总
机械专业英语词汇（大全） 金属切削metal cutting 机床machine tool 金属工艺学technology of metals 刀具cutter 摩擦friction 联结link 传动drive/transmission 轴shaft 弹性elasticity 频率特性frequency characteristic 误差error 响应response 定位allocation 机床夹具jig 动力学dynamic 运动学kinematic 静力学static 分析力学analyse mechanics 拉伸pulling 压缩hitting 剪切shear 扭转twist 弯曲应力bending stress 强度intensity 三相交流电three-phase AC 磁路magnetic circles 变压器transformer 异步电动机asynchronous motor 几何形状geometrical 精度precision 正弦形的sinusoid 交流电路AC circuit 机械加工余量machining allowance 变形力deforming force 变形deformation 应力stress 硬度rigidity 热处理heat treatment 退火anneal 正火normalizing 脱碳decarburization 渗碳carburization 电路circuit 半导体元件semiconductor element 反馈feedback 发生器generator 直流电源DC electrical source 门电路gate circuit 逻辑代数logic algebra 外圆磨削external grinding 内圆磨削internal grinding 平面磨削plane grinding 变速箱gearbox 离合器clutch 绞孔fraising 绞刀reamer 螺纹加工thread processing 螺钉screw 铣削mill 铣刀milling cutter 功率power 工件workpiece 齿轮加工gear mechining 齿轮gear 主运动main movement 主运动方向direction of main movement 进给方向direction of feed 进给运动feed movement 合成进给运动resultant movement of feed 合成切削运动resultant movement of cutting 合成切削运动方向direction of resultant movement of cutting 切削深度cutting depth 前刀面rake face 刀尖nose of tool 前角rake angle 后角clearance angle 龙门刨削planing 主轴spindle 主轴箱headstock 卡盘chuck 加工中心machining center
考研复试英语自我介绍范文_自我介绍_模板
考研复试英语自我介绍范文_自我介绍_模板 考研复试英语自我介绍范文（一） Good morning/afternoon，my dear teachers (my dear professors)。I am very glad to be here for your interview. My name is ___.I am ___ years old. I come from _______，a very beautiful city. My undergraduate period will be accomplished in _______university in July，2009. And now，I am trying my best for obtaining a key to ________ University. Generally speaking，I am a hard-working student. I will try my best to finish it no matter how difficult it is. When I was sophomore，I found web design very interesting，so I learned it very hard. To weave a homepage for myself，I stayed with my personal computer for half a month，and I am the first one in my class who own his homepage. Furthermore，I am a person with great perseverance. During the days preparing for the first examination，I insist on running every day，no matter what the weather was like. And just owning to this，I could concentrate on my study and succeeded in the end. Well，in my spare time，I like basketball，tennis and Chinese chess. Also，English is my favorite. I often go to English corner to practice my oral English on every Thursday，and write compositions to improve my written ability. But I know my English is not good enough，I will continue studying. Ok，that‘s all，thank you for your attention. 考研复试英语自我介绍范文（二） Respected Professors，Good afternoon! I’m great honored to meet you here.Now allow me to give a brief self-introduction. I’m ，26 years old ，born in city ，Province.In the year of ，I entered University，majoring in Machincal Designing and Producing. During those 4 years’study，I worked hard and I was always active in various activities. I gained the first scholarship for four times and I joined the Communist Party at the college. After my graduation in June ，I worked in company. I got a position in the Technology Department the first year and I was involved in several internet projects，such as the one for College student Recruitment in Henan Province and the one for Computer Center in Mathmatics Department in Zhengzhou University. Owning to my hard work ，I was awarded the Best Newcomer Prize in the year . The next year，I was transferred into the Principal Customer Department，responsible for developing and strengthening a good relationship between the principal customers and my company. Two major customers，Henan Provincipal Department of Transportation and Henan Provincial Department of Personnel，are under my work. However，with time going on ，the more I experienced，the clear er I realized that I’m really interested in the Enterprise Management .I find many enterprises have the problem of an unmatched management to its developing speed . I’m eager to learn more about management and I hope I can study further in this University. So I resigned in August ，2008 and started the way to pursuing my studies. After about half year’s hard work，I’m finally standing before your honorable professors now. I’m really excited. Though I’ve sacrificed much on my way to pusuing studies，I bel ieve it’s worthwhile. I believe working hard will finally be prepared. Thank you ! 考研复试英语自我介绍注意事项
研究生博士生复试英语自我介绍范文
研究生博士生复试英语自我介绍范文 Introduce myself Good morning, Dear Professors: It’s my honor to introduce myself. My name is chenchen, I am from qingyang County anhui Province, April 6 I was born in a common family, and my parents are workers, I love and respect them very much. We were delight with my becoming a fresh man in September 1994. Luckily, I was permitted to be a graduate student after 5 years colorful life on campus. I received my Bachelor degree 2005 in anhui agriculture university Institute of (College of )Resources and Environmental Science, then a Master degree 2009 in anhui agriclture University of Science and Technology. For those 7 years my major was Die Design. Before I received my Master degree, I had done the subject of meteorology. For the past 3 years, I have been in anhui agriculture College, where I have been and still am a teacher. I teach students Machine Design etc. I have published more than 10 first-author papers.That’s all, thanks! 博士面试时英语自我介绍技巧 一、第一句话（first word）见到考官的第一句话，很关键，不用说的很复杂。可以是一个简单句，但一定要铿锵有力。展示出自信和实力。千万不要来一句“sorry, my English is poor”.常见的开头有:1. Good morning! may I introduce myself ..2. I am glad to be here for this interview. First let me introduce myself. I’m peter white, my NO is …(北大清
机械专业中英文对照(完整版)1
机械专业英语词汇 陶瓷ceramics 合成纤维synthetic fibre 电化学腐蚀electrochemical corrosion 车架automotive chassis 悬架suspension 转向器redirector 变速器speed changer 板料冲压sheet metal parts 孔加工spot facing machining 车间workshop 工程技术人员engineer 气动夹紧pneuma lock 数学模型mathematical model 画法几何descriptive geometry 机械制图Mechanical drawing 投影projection 视图view 剖视图profile chart 标准件standard component 零件图part drawing 装配图assembly drawing 尺寸标注size marking 技术要求technical requirements 刚度rigidity 内力internal force 位移displacement 截面section 疲劳极限fatigue limit 断裂fracture 塑性变形plastic distortion 脆性材料brittleness material 刚度准则rigidity criterion 垫圈washer 垫片spacer 直齿圆柱齿轮straight toothed spur gear 斜齿圆柱齿轮helical-spur gear 直齿锥齿轮straight bevel gear 运动简图kinematic sketch 齿轮齿条pinion and rack 蜗杆蜗轮worm and worm gear 虚约束passive constraint 曲柄crank 摇杆racker 凸轮cams 共轭曲线conjugate curve 范成法generation method 定义域definitional domain 值域range 导数\\微分differential coefficient 求导derivation 定积分definite integral 不定积分indefinite integral 曲率curvature 偏微分partial differential 毛坯rough 游标卡尺slide caliper 千分尺micrometer calipers 攻丝tap 二阶行列式second order determinant 逆矩阵inverse matrix 线性方程组linear equations 概率probability 随机变量random variable 排列组合permutation and combination 气体状态方程equation of state of gas 动能kinetic energy 势能potential energy 机械能守恒conservation of mechanical energy 动量momentum 桁架truss 轴线axes 余子式cofactor 逻辑电路logic circuit 触发器flip-flop 脉冲波形pulse shape 数模digital analogy 液压传动机构fluid drive mechanism 机械零件mechanical parts 淬火冷却quench 淬火hardening 回火tempering 调质hardening and tempering 磨粒abrasive grain 结合剂bonding agent 砂轮grinding wheel 后角clearance angle 龙门刨削planing 主轴spindle
机械专业英语高频词汇讲解
机械专业英语高频词汇 metal cutting 金属切削 machine tool 机床 technology of metals金属工艺学 cutter 刀具 friction 摩擦 link 联结 drive/transmission 传动 shaft 轴 elasticity 弹性 frequency characteristic 频率特性 error 误差 response响应 allocation 定位 jig 机床夹具 term 语术 d ynamic 动力学 k inematic运动学 s tatic 静力学 a nalyse mechanics 分析力学 p ulling 拉伸 s hear 剪切 t wist 扭转 b ending stress 弯曲应力 i ntensity 强度 t hree-phase AC 三相交流电 m agnetic circles 磁路 t ransformer变压器 a synchronous motor 异步电动机 g eometrical 几何形状 p recision 精度 s inusoid 正弦形的 h itting压缩 A C circuit 交流电路 m achining allowance 机械加工余量 d eforming forc e 变形力 d eformation 变形 s tress 应力 r igidity 硬度 r igidity 刚度 h eat treatment 热处理 d ecarburization 脱碳 c ircuit 电路
f raising铰孔 semiconductor element 半导体元件 f eedback 反馈 g enerator 发生器 D C electrical source直流电源 g ate circuit 门电路 l ogic algebra//////algorithm逻辑代数 e xternal grinding 外圆磨削 internal grinding内圆磨削 p lane grinding 平面磨削 c arburization 渗碳 gearbox 变速箱 c lutch 离合器 r eamer铰刀 t hread processing 螺纹加工 s crew 螺钉 m ill 铣削 m illing cutter 铣刀 p ower 功率 w orkpiece 工件 g ear machining 齿轮加工 g ear 齿轮 m ain movement 主运动 d irection of main movem 主运动方向ent d irection of feed进给方向 f eed movement 进给运动 r esultant movement of fe 合成进给运动ed r esultant movement of cut 合成切削运动ting d irection of resultant cutting 合成切削运动方向motion c utting depth 切削深度 r ake face 前刀面 n ose of tool刀尖 r ake angle 前角 c learance angle 后角 p laning 龙门刨削 s pindle 主轴 h eadstock主轴箱 c huck 卡盘 m achining center 加工中心 l athe tool 车刀 l athe 车床 b ore 钻削镗削 t urning车削 g rinder 磨床
考研复试英语自我介绍模板
2014考研复试英语自我介绍模板 同学们在为2014考研复试做准备时，会注意很多院校有英语口试环节，而一个精彩的开场白无疑会给考官留下很好的第一印象。很多同学不知道该如何准备一个比较恰当的自我介绍，在这里给大家提供一个模板，大家可以参考一下，改写成适合自己、与自己具体情况相符的自我介绍。 Good morning, everyone! It’s really my pleasureto be here for the interview. My name is (你的名字), from (城市名) city, (省份名称) province. I am currently studying in the major of(专业名称) from the department of (院系名称), and Iwill graduate from (学校名称)this July. In the past three and a half years, I have learnt some basic knowledge of …(所学专业). Forexample, from the courses of (课程名称) and (课程名称), I got to know …(专业理论). When I learntmore about this field, I became more interested in it. Apart from the textbooks, I borrowedmany relevant ones from our library to read, such as (你读过的相关的专业课书的名称)、(你读过的专业相关的书籍名称)and (你读过的专业相关的书籍名称). I really enjoyed my journey when readingand absorbing the information f rom these fascinating works. In addition to reading books, Ialso like browsi ng through some journals in (专业领域) on a daily basis so that I can keep an eyeon the latest news and findings i n my area. My passion in (专业名称) is the reason why I wouldlike to pursue my further study in this field. Owi ng to my diligence and persistence, I could concentrate on my study and I believe that I could eventually succeed. I think I’m a hard working student, but this does not mean that I am bookish. In my spare time, I’d like to listen to some music and do some sports, like (女同学这里可以说jogging, yoga,Pilates, badminton and Tae kwon do; 男同学可以说basketball, football and tennis, 这里要结合大家的实际情况来说). I will try my best to do anything that I am interested in. For example, …. (这里大家可以举例说在大学时报名了一个什么比赛，然后自己如何努力，最后取得不错的成绩). This is just a brief introduction of myself. If there is any further detail you wo uld like toknow about me, please feel free to ask. Thank you very much! 从该模板中，大家可以看出一个较为完整的自我介绍的套路，先介绍自己的基本情况——姓名、来自哪里、当前就读学校和专业(或当前的工作单位和岗位)。然后介绍自己在专业学习方面的一些情况，例如专业核心课程和相关的教辅书籍。所谓教辅书籍，就是一些与核心专业相关但并不是课本的一些著作。举个例子，读经济学的同学应该读过亚当·斯密的《国富论》、曼昆的《经济学原理》和《宏观经济学》、范里安的《微观经济学》、萨缪尔森
考研复试的英语自我介绍
考研复试的英语自我介绍 考研复试英语自我介绍技巧 考研过后广大考生的注意力转移到了对复试的关注，尤其是英语的复试问题一直是考生们最关注的问题之一，而复试中自我介绍是非常有必要提前准备的，下面我们分析自我介绍的具体事项，希望大家能提前准备： 3分钟左右的自我介绍要重点准备。基本上每个院校每个专业的口试中都会涉及这一方面。自我介绍时思路要清楚，突出重点，口语要自然流畅。考官其实是要借此了解你的口头表达能力以及你的报名表之外的一些信息，可以精心设计一下自我介绍，也可以借鉴网上的范文，但一定要结合自身情况进行修改，凸显出自己的特色。 1) 我们一进入考场，考官一般都要求作自我介绍，开头可以用一句话引入，例如：Dear professors, I feel so glad to meet all of you here. 然后就可以进入主题，介绍自己及相关的信息等等。 2) 自我介绍的主体内容 ①姓名，介绍自己姓名时，发音一定要慢要准。 ②年龄，年龄可说可不说，可以跟在姓名后带过(I am XXX, 25 years old)，也可以加上家乡和家庭的介绍。 ③原来的院校、专业：一定要把原来学校或公司的英文名称、专业的英文名称弄清楚。在职考生则应将自己公司、自己职位、职称的英文名称弄明白。 ④性格、能力，可以着重强调你的个性对你报考的专业有何积极的作用。以下是可供选择的形容词：carefully，detail-oriented、logical、steady、responsible、dependable、efficient、 Aggressive、adaptable、amicable等等。 在职考生或有过工作经验的考生还可以强调一下你的工作成绩，如：As theassistant to the General Manger of XXX Company, I have helped to negotiate a$200,000 deal for the corporation。
机械专业英语复试词汇总结
机械英语词汇大全2 金属切削 metal cutting 机床 machine tool 金属工艺学 technology of metals 刀具 cutter 摩擦 friction 联结 link 传动 drive/transmission 轴 shaft 弹性 elasticity 频率特性 frequency characteristic 误差 error 响应 response 定位 allocation 拉孔 broaching 装配 assembling 铸造 found 流体动力学 fluid dynamics 流体力学 fluid mechanics 加工 machining 液压 hydraulic pressure 切线 tangent 机电一体化 mechanotronics mechanical-electrical integration 气压 air pressure pneumatic pressure 稳定性 stability 介质 medium 数学模型 mathematical model 画法几何 descriptive geometry 机械制图 Mechanical drawing 投影 projection 视图 view 剖视图 profile chart 标准件 standard component 零件图 part drawing 装配图 assembly drawing 尺寸标注 size marking 技术要求 technical
机床夹具 jig 动力学 dynamic 运动学 kinematic 静力学 static 分析力学 analyse mechanics 拉伸 pulling 压缩 hitting 剪切 shear 扭转 twist 弯曲应力 bending stress 强度 intensity 三相交流电 three-phase AC 磁路 magnetic circles 变压器 transformer 异步电动机 asynchronous motor 液压驱动泵 fluid clutch 液压泵 hydraulic pump 阀门 valve 失效 invalidation 强度 intensity 载荷 load 应力 stress 安全系数 safty factor 可靠性 reliability 螺纹 thread 螺旋 helix 键 spline 销 pin 滚动轴承 rolling bearing 滑动轴承 sliding bearing requirements 刚度 rigidity 内力 internal force 位移 displacement 截面 section 疲劳极限 fatigue limit 断裂 fracture 塑性变形 plastic distortion 脆性材料 brittleness material 刚度准则 rigidity criterion 垫圈 washer 垫片 spacer 直齿圆柱齿轮
研究生复试英语自我介绍_模板
研究生复试英语自我介绍_模板 篇一：研究生复试英语自我介绍 Good morning，everyone! I am glad to be here for this interview. First，let me introduce myself to you. My name is Li Ming. I was born on April 23，1981. I am a local person. I am graduating from University this June. I major in Chinese literature. I hope I could get the opportunity to finish my postgraduate courses in Peking University which I have desired for a long time. I have the confidence because I have such ability! I am a girl who is fervent（热情的），outgoing and creative. At the same time，I think I am quick in mind and careful in everything. I am looking forward to my postgraduate studies and life. I will soon prove that your decision of choosing me is the wisest. Thank you for giving me such a valuable opportunity! 篇二：研究生复试英语自我介绍 Good morning/afternoon，my dear teachers （my dear professors）。I am very glad to be here for your interview. My name is ___.I am ___ years old. I come from _______，a very beautiful city. My undergraduate period will be accomplished in _______university in July，20**. And now，I am trying my best for obtaining a key to ________ University. Generally speaking，I am a hard-working student. I will try my best to finish it no matter how difficult it is. When I was sophomore，I found web design very interesting，so I learned it very hard. To weave a homepage for myself，I stayed with my personal computer for half a month，and I am the first one in my class who own his homepage. Furthermore，I am a person with great perseverance. During the days preparing for the first examination，I insist on running every day，no matter what the weather was like. And just owning to this，I could concentrate on my study and succeeded in the end. Well，in my spare time，I like basketball，tennis and Chinese chess. Also，English is my favorite. I often go to English corner to practice my oral English on every Thursday，()and write compositions to improve my written ability. But I know my English is not good enough，I will continue studying. Ok，that‘s all，thank you for your attention. 篇三：研究生复试英语自我介绍 Good morning，everyone! I am glad to be here for this interview. First，let me introduce myself to you. My name is Qin Jiayin. I was born on April 23，1981. I am a local person.I am graduating from Jilin Normal University this June. I major in Chinese literature. I hope I could get the opportunity to finish my postgraduate courses in Jilin University which I have desired for a long time. I have the confidence because I have such ability! I am a girl who is fervent，outgoing and creative. At the same time，I think I am quick in mind and careful in everything. I am looking