机械手设计英文参考文献原文翻译

机械手设计英文参考文献原文翻译
机械手设计英文参考文献原文翻译

机械手设计英文参考文献原文翻译

案场各岗位服务流程

销售大厅服务岗:

1、销售大厅服务岗岗位职责:

1)为来访客户提供全程的休息区域及饮品;

2)保持销售区域台面整洁;

3)及时补足销售大厅物资,如糖果或杂志等;

4)收集客户意见、建议及现场问题点;

2、销售大厅服务岗工作及服务流程

阶段工作及服务流程

班前阶段1)自检仪容仪表以饱满的精神面貌进入工作区域

2)检查使用工具及销售大厅物资情况,异常情况及时登记并报告上级。

班中工作程序服务

流程

行为

规范

迎接

指引

递阅

资料

上饮品

(糕点)

添加茶水工作1)眼神关注客人,当客人距3米距离侯客迎询问客户送客户

注意事项

15度鞠躬微笑问候:“您好!欢迎光临!”2)在客人前方1-2米距离领位,指引请客人向休息区,在客人入座后问客人对座位是否满意:“您好!请问坐这儿可以吗?”得到同意后为客人拉椅入座“好的,请入座!”

3)若客人无置业顾问陪同,可询问:请问您有专属的置业顾问吗?,为客人取阅项目资料,并礼貌的告知请客人稍等,置业顾问会很快过来介绍,同时请置业顾问关注该客人;

4)问候的起始语应为“先生-小姐-女士早上好,这里是XX销售中心,这边请”5)问候时间段为8:30-11:30 早上好11:30-14:30 中午好 14:30-18:00下午好

6)关注客人物品,如物品较多,则主动询问是否需要帮助(如拾到物品须两名人员在场方能打开,提示客人注意贵重物品);

7)在满座位的情况下,须先向客人致

待;

阶段工作及服务流程

班中工作程序工作

要求

注意

事项

饮料(糕点服务)

1)在所有饮料(糕点)服务中必须使用

托盘;

2)所有饮料服务均已“对不起,打扰一

下,请问您需要什么饮品”为起始;

3)服务方向:从客人的右面服务;

4)当客人的饮料杯中只剩三分之一时,

必须询问客人是否需要再添一杯,在二

次服务中特别注意瓶口绝对不可以与

客人使用的杯子接触;

5)在客人再次需要饮料时必须更换杯

子;

下班程

序1)检查使用的工具及销售案场物资情况,异常情况及时记录并报告上级领导;

2)填写物资领用申请表并整理客户意见;3)参加班后总结会;

4)积极配合销售人员的接待工作,如果下班

1.3.3.3吧台服务岗

1.3.3.3.1吧台服务岗岗位职责

1)为来访的客人提供全程的休息及饮品服务;

2)保持吧台区域的整洁;

3)饮品使用的器皿必须消毒;

4)及时补充吧台物资;

5)收集客户意见、建议及问题点;

1.3.3.3.2吧台服务岗工作及流程

阶段工作及服务流程

班前阶段1)自检仪容仪表以饱满的精神面貌进入工作区域

2)检查使用工具及销售大厅物资情况,异常情况及时登记并报告上级。

班中工作程序服务

流程

行为

规范

问询需求按需求提

供饮品客户离开后清理桌面

服务准迎客:保得知需客户

班中工作程序工作

要求

注意

事项

1)在饮品制作完毕后,如果有其他客户仍

在等到则又销售大厅服务岗呈送;

2)所有承装饮品的器皿必须干净整洁;

下班程序5)检查使用的工具及销售案场物资情况,异常情况及时记录并报告上级领导;

6)填写物资领用申请表并整理客户意见;7)参加班后总结会;

8)积极配合销售人员的接待工作,如果下班时间已经到,必须待客人离开后下班;

1.3.4展示区服务岗岗位职责

1.3.4.1车场服务岗

1.3.4.1.1车场服务岗岗位职责

1)维护停车区的正常停车秩序;

2)引导客户车辆停放,同时车辆停放有序;

3)当车辆挺稳时,上前开车门并问好;同时提醒客户锁好车门;4)视情况主动为客户提供服务;

5)待车辆停放完好后,仔细检查车身情况请客户签字确认;

1.3.4.1.2

阶段工作及服务流程

班前阶1)自检仪容仪表

好,如出现异常现象立即报告或报修

3)检查停车场车位是否充足,如有异常及时上报上级领导

班中工作程序服务

流程

行为

规范

1.敬礼

2.指引停车

3.迎客问好

4.目送

阶段工作及服务流程

班中工作程序工作

要求

注意

事项

1)岗位应表现良好的职业形象时刻注

意自身的表现,用BI规范严格要求自

2)安全员向客户敬礼,开车门,检查车

辆情况并登记,用对讲系统告知销售大

厅迎宾,待客人准备离开目送客人离

开;

引导敬为问指引销售

检查车

为引敬

下班程序1)检查使用的工具情况,异常情况及时记录并报告上级领导;

2)参加班后总结会;

3)统计访客量;

4)积极配合销售人员的接待工作,如果下班时间已经到,必须待客人离开后下班;

1.3.4.2展示区礼宾岗

1.3.4.

2.1展示区礼宾岗岗位职责

1)对过往的客户行标准的军礼,目视;

2)与下一交接岗保持信息联系,及时将信息告知下一岗位,让其做好接待工作;3)热情礼貌的回答客户的提问,并做正确的指引;

4)注视岗位周边情况,发现异常及时上报上级领导;

1.3.4.

2.2展示区礼宾岗工作及服务流程

阶段工作及服务流程

班前阶段1)自检仪容仪表

2)检查周边及案场区设备、消防器材是否良好,如出现异常现象立即报告或报修

班中工作程序服务

流程

敬礼问指引样板敬礼目送

行为

规范

1.迎接客户

2.指引客户

3.为客户提供帮

助4.目送客户

工作要求注意事项1)礼宾岗必须掌握样板房户型、面积、朝向、在售金额、物业服务管理费用等客户比较关注的话题;

2)礼宾岗上班后必须检查样板房的整体情况,如果发现问题必须及时上报并协助销售进行处理;

3)视线范围内见有客户参观时,远处目视,待客户行进1.5米的距离时,敬军礼并主动向客户微笑问好,“欢迎您来参观样板房,这边请,手势指引样板房方向”;

阶段工作及服务流程

班中工作程序工作

要求

注意

4)参观期间,礼宾岗需注意背包或穿大

衣等可以重点人员进行关注,避免样板

房的物品丢失,当巡检时发现有物品丢

员进行询问,根据销售部的意见决定是否报警;

5)样板房开放时间,在未经销售、项目部允许而进行拍照、摄像等行为劝阻,禁止任何人员挪动展示物品;

6)样板房开放时礼宾岗要关注老人、小孩、孕妇及行动不便的人群,对在参观过程中出现的意外及物品损坏必须及时上报上级领导,根据销售部的意见进行处理并做好登记;

7)样板房开放期间礼宾岗要礼貌准确的回答客户的问题,对不能回答的问题需引导给销售人员由其进行解答,严禁用含糊不清或拒绝来回答;

8)留意客户是否离开样板房,通知电瓶车司机来接客户;

9)当客户参观完毕离开样板房,待客户1.5米距离时微笑敬礼目送客户,手势指向出门的方向,若电瓶车未到,向客户致歉并说明电瓶车马上就到;

10)每天下班要对样板房物品进行检查

级领导呈报,根据销售部意见进行处理并做好记录;

11)礼宾岗下班后要关闭样板房的水源、电源及监控系统并与晚班人员做好交接;

12)对于特殊天气,样板房礼宾岗要检查周边环境,以防不则;

下班程序1)检查使用的工具情况,异常情况及时记录并报告上级领导;

2)参加班后总结会;

3)统计访客量;

4)积极配合销售人员的接待工作,如果下班时间已经到,必须待客人离开后下班;

1.3.4.3电瓶车服务岗

1.3.4.3.1电瓶车服务岗岗位职责

1)严格按照规定的路线及线路行驶,将客人送到指定地点;

2)正确执行驾驶操作流程,确保车行安全;

3)了解开发建设项目的基本情况并使用统一说辞,在允许的情况下礼貌回答客户问题;4)车辆停放时及时对车辆进行清洁,确保车辆干净;

5)负责车辆的检查;

6)对车辆实施责任化管理,未经允许任何人不得驾驶;

8)做好电瓶车的交接工作

1.3.4.3.2电瓶车服务岗工作及服务流程

阶段工作及服务流程

班前阶段1)自检仪容仪表

2)检查电瓶车运行状态,如发现问题立即上报上级领导进行维修并做好记录

班中工作程序服务

流程

行为

规范

1)迎接客户上车2)转弯、减速、避让

提示客户3)下车提示客户小心

工作

要求

注意

事项

1)电瓶车驾驶员载客至样板房过程中

禁止鸣笛、超速、遇车避让;

2)客户上车时应主动问好,欢迎您来到

XX项目,车辆行驶时应提示客户坐稳扶

好,到达目的地时,驾驶员提示客户样

板房已经到达请小心下车,客户离开电

问指引车辆起车辆行驶下

请慢走;

3)带客户下车时应检查车上是否有遗留物品,并提示客户随身带好物品;4)电瓶车必须严格按照规定路线行驶;5)做好行车记录;

下班程序1)待客户全部离开后将电瓶车开至指定位置,并将车辆进行清洁及充电;

2)整理客户意见,参加班后会;

3)积极配合销售人员的接待工作,如果下班时间已经到,必须待客人离开后下班;

1.3.5样板房服务岗

1.3.5.1样板房讲解岗岗位标准

1.3.5.1.1样板房讲解岗岗位职责

1)负责来访样板房客户的全程接待与讲解;

2)协助、配合置业顾问介绍;

3)客户离开后,样板房零星保洁的处理;

4)收集客户意见、建议及现场问题点的填写(样板房日常庶务)反馈单,下班后递交案场负责人;

1.3.5.1.2样板房讲解刚工作及服务流程

阶段工作及服务流程

段作;

2)检查样板房设备设施运行情况,如有异常

及时上报并做好登记;

3)检查样板房保洁情况及空调开启情况;

设备设施班中工作程序服务

流程

行为

规范

1)站立微笑自然2)递送鞋套3)热情大

方、细致讲解4)温馨道别保持整洁

工作

要求

注意

事项

1)每日对接样板房设备清单,检查空调

开启及保洁状态;

2)站在样板房或电梯口,笑意盈盈接待

客户;

3)顾客出现时,身体成30度角鞠躬“欢

迎光顾XX样板房”

4)引领入座并双手递上鞋套,双手递上

时不宜过高,与客人坐下时的膝盖同

高;

迎客,引导客协助置向客户

免重复;

6)专注你接待的客户,勿去应其他客

户,以示尊重,对其他客户微笑点头以

示回应;

7)若无销售人员带领的客户,要主动介

绍房子的户型及基本信息,谈到房子的

价位时请客户直接与销售人员联系不

要直接做回答;

8)参加样板房时,未经销售或其他人员

允许谢绝拍照及录像,谢绝动用样板房

物品及附属设施,对客遗失物品做好登

记并上报上级领导;

9)时刻注意进入样板房的客户群体,特

别是小孩,要处处表达殷勤的关心,以

示待客之道;

10)时刻留意客户的谈话,记下客户对样

板房的关注点和相关信息;

11)送别,引领客户入座示意脱下鞋套双

手承接,客户起身离去时,鞠躬说感谢

您参观样板房,并目送客户离开;

下班程1)检查样板房设备设施是否处于良好的运营

2)需对接样板房物品清单;

3)整理客户意见,参加班后会;

4)积极配合销售人员的接待工作,如果下班

时间已经到,必须待客人离开后下班;

1.3.5.2样板房服务岗岗位标准(参见销售大厅服务岗岗位标准)

1.3.6案场服务岗管理要求

培训及例会岗前培训BI规范及楼盘基本情况

在岗培训每

月至少一次

1)公司企业文化2)客户服务技

巧3)客户心理培训4)突发事件

处理5)营销知识培训6)职业安

全7)7S现场管理

例会

日会:每日参加案场管理岗组织

的总结会并及时接收案场信息

周会:每周参加管理岗组织的服

务类业务点评会

客户信息收集反馈

每日汇总客户信息反馈到案场管理岗

样板房客户车场岗客户

监督考

核1)考核频次:至少每月一次;

2)考核人:案场管理岗;

3)每月汇总客户信息反馈表,依据上级检查及客户满意度调查情况进行绩效加减;

4)由案场负责人直接考核;

5)连续两个月考核不合格者直接辞退

1.4案场基础作业岗

1.4.1案场基础作业岗任职资格

岗位类

岗位名称任职资格基

础作业岗安

基本要求:

1)男性:身高1.80米

以上;

2)年龄:(18-30)岁;

3)普通话标准;

4)学历:高中以上;

技能要求:

1)熟悉项

目的基本

情况

2)具备过

硬的军事

素质

素质要求:

1)性格:开朗、主动服

务意识强有亲和力;

2)从业经历:具有同岗

位经验半年以上

案场保洁岗及绿化养护岗基本要求:

1)男女不限;

2)年龄30岁以下

3)学历:初中以上

技能要求“

案场保洁岗:

熟知药剂使

用及工具使

案场绿化养

护岗:熟知树

木习性及绿

化养护知识素质要求:具有亲和力,

对保洁及绿化工作有认

同感

案场技术保障岗基本要求:男性五官端

学历:中专(机电一体化)

技能要求:

1)具有水

或电及空

调证书;

2)熟悉各

岗位操作

工具的使

用;

3)同岗工

作一年以

素质要求:

踏实肯干,具有亲和力及

主动服务意识

通用规范

参照

标准 君正物业员工BI 规范手册

1.4.3安全岗岗位标准 1.4.3.1安全岗岗位职责

1)负责销售案场管理服务区域的安全巡视工作,维持正常秩序; 2)监督工作区域内各岗位工作状态及现场情况及时反馈信息;

3)发现和制止各种违规和违章行为,对可疑人员要礼貌的盘问和跟踪察看; 4)谢绝和制止未经许可的各类拍照、摆放广告行为; 1.4.3.2安全岗作业要求

1)按照巡视路线巡视签到检查重点部位;

2)遇见客户要站立、微笑、敬礼,礼貌的回答客户的提问并正确引导; 3)人过地净,协助案场保洁人员做好案场的环境维护; 4)在每一巡视期内检查设备设施运行状态并做好记录; 5)协助做好参观人员的车辆引导、指引和执勤工作;

1.4.4保洁岗岗位标准

1.4.4.1保洁岗岗位职责

1)负责案场办公区域、样板房及饰品的清洁工作;

2)负责案场外围的清洁工作;

3)负责案场垃圾的处理;

4)对案场杂志等资料及时归位;

1.4.4.2保洁岗作业要求

1)每天提前半小时上岗,对案场玻璃、地面等进行全方位清洁;2)卫生间每十分钟进行一次巡视性清洁;

3)阴雨天提前关闭门窗;

4)掌握清洁器具的使用;

5)熟知清洁药剂的配比及使用;

1.4.5绿化岗岗位标准

1.4.5.1绿化岗岗位职责

1)负责管理区域内一切绿化的养护;

2)确保绿化的正常存活率;

3)对绿植进行修剪及消杀;

1.4.6案场技术岗岗位标准

1.4.6.1案场技术岗岗位职责

1)全面负责案场区域内设备设施的维护、维修及保养;

2)协助管理岗完成重大接待工作案场的布置;

1.4.6.2案场技术岗岗位要求

1)每日案场开放前对辖区设备设施进行检查,保障现场零事故;2)每日班后对设备设施进行检查保障正常运行并做好相关记录;3)报修后5分钟赶到现场;

4)接到异常天气信息,对案场设备进行安全隐患排除;

1.4.7案场基础作业岗岗位要求

培训及例会岗前培训BI规范及楼盘基本情况

在岗培训每

月至少一次

1)公司企业文化2)客户服务技

巧3)客户心理培训4)突发事件

处理5)营销知识培训6)职业安

全7)7S现场管理

例会

日会:每日参加案场管理岗组织

的总结会并及时接收案场信息

周会:每周参加管理岗组织的服

务类业务点评会

客户信息收集反馈

每日汇总客户信息反馈到案场管理岗

监督考

核1)考核频次:至少每月一次;2)考核人:案场管理岗;

样板房客户车场岗客户

机械毕业设计英文外文翻译460数字控制 (2)

附录 科技译文: Numerical Control Numerical Control(NC) is a method of controlling the movements of machineComponents by directly inserting coded instructions in the form of numerical data(numbers and data ) into the system.The system automatically interprets these data and converts to output signals. These signals ,in turn control various machine components ,such as turning spindles on and off ,changing tools,moving the work piece or the tools along specific paths,and turning cutting fluits on and off. In order to appreciate the importer of numerical control of machines ,let’s briefly review how a process such as machining has been carried out traditionally .After studying the working drawing of a part, the operator sets up the appropriate process parameters(such as cutting speed ,feed,depth of cut,cutting fluid ,and so on),determines the sequence of operations to be performed,clamps the work piece in a workholding device such as chuck or collet ,and proceeds to make the part .Depending on part shape and the dimensional accuracy specified ,this approach usually requires skilled

机器人外文翻译

英文原文出自《Advanced Technology Libraries》2008年第5期 Robot Robot is a type of mechantronics equipment which synthesizes the last research achievement of engine and precision engine, micro-electronics and computer, automation control and drive, sensor and message dispose and artificial intelligence and so on. With the development of economic and the demand for automation control, robot technology is developed quickly and all types of the robots products are come into being. The practicality use of robot products not only solves the problems which are difficult to operate for human being, but also advances the industrial automation program. At present, the research and development of robot involves several kinds of technology and the robot system configuration is so complex that the cost at large is high which to a certain extent limit the robot abroad use. To development economic practicality and high reliability robot system will be value to robot social application and economy development. With the rapid progress with the control economy and expanding of the modern cities, the let of sewage is increasing quickly: With the development of modern technology and the enhancement of consciousness about environment reserve, more and more people realized the importance and urgent of sewage disposal. Active bacteria method is an effective technique for sewage disposal,The lacunaris plastic is an effective basement for active bacteria adhesion for sewage disposal. The abundance requirement for lacunaris plastic makes it is a consequent for the plastic producing with automation and high productivity. Therefore, it is very necessary to design a manipulator that can automatically fulfill the plastic holding. With the analysis of the problems in the design of the plastic holding manipulator and synthesizing the robot research and development condition in recent years, a economic scheme is concluded on the basis of the analysis of mechanical configuration, transform system, drive device and control system and guided by the idea of the characteristic and complex of mechanical configuration,

步进电机及单片机英文文献及翻译

外文文献: Knowledge of the stepper motor What is a stepper motor: Stepper motor is a kind of electrical pulses into angular displacement of the implementing agency. Popular little lesson: When the driver receives a step pulse signal, it will drive a stepper motor to set the direction of rotation at a fixed angle (and the step angle). You can control the number of pulses to control the angular displacement, so as to achieve accurate positioning purposes; the same time you can control the pulse frequency to control the motor rotation speed and acceleration, to achieve speed control purposes. What kinds of stepper motor sub-: In three stepper motors: permanent magnet (PM), reactive (VR) and hybrid (HB) permanent magnet stepper usually two-phase, torque, and smaller, step angle of 7.5 degrees or the general 15 degrees; reaction step is generally three-phase, can achieve high torque output, step angle of 1.5 degrees is generally, but the noise and vibration are large. 80 countries in Europe and America have been eliminated; hybrid stepper is a mix of permanent magnet and reactive advantages. It consists of two phases and the five-phase: two-phase step angle of 1.8 degrees while the general five-phase step angle of 0.72 degrees generally. The most widely used Stepper Motor. What is to keep the torque (HOLDING TORQUE) How much precision stepper motor? Whether the cumulative: The general accuracy of the stepper motor step angle of 3-5%, and not cumulative.

机械毕业设计英文外文翻译71车床夹具设计分析

附录A Lathe fixture design and analysis Ma Feiyue (School of Mechanical Engineering, Hefei, Anhui Hefei 230022, China) Abstract: From the start the main types of lathe fixture, fixture on the flower disc and angle iron clamp lathe was introduced, and on the basis of analysis of a lathe fixture design points. Keywords: lathe fixture; design; points Lathe for machining parts on the rotating surface, such as the outer cylinder, inner cylinder and so on. Parts in the processing, the fixture can be installed in the lathe with rotary machine with main primary uranium movement. However, in order to expand the use of lathe, the work piece can also be installed in the lathe of the pallet, tool mounted on the spindle. THE MAIN TYPES OF LATHE FIXTURE Installed on the lathe spindle on the lathe fixture

机械毕业设计英文外文翻译204机电一体化

附录 INTEGRATION OF MACHINERY (From ELECTRICAL AND MACHINERY INDUSTRY)ABSTRACT Machinery was the modern science and technology development inevitable result, this article has summarized the integration of machinery technology basic outline and the development background .Summarized the domestic and foreign integration of machinery technology present situation, has analyzed the integration of machinery technology trend of development. Key word:integration of machinery ,technology,present situation ,product t,echnique of manufacture ,trend of development 0. Introduction modern science and technology unceasing development, impelled different discipline intersecting enormously with the seepage, has caused the project domain technological revolution and the transformation .In mechanical engineering domain, because the microelectronic technology and the computer technology rapid development and forms to the mechanical industry seepage the integration of machinery, caused the mechanical industry the technical structure, the product organization, the function and the constitution, the production method and the management system has had the huge change, caused the industrial production to enter into “the integration of machinery” by “the machinery electrification” for the characteristic development phase. 1. Integration of machinery outline integration of machinery is refers in the organization new owner function, the power function, in the information processing function and the control function introduces the electronic technology, unifies the system the mechanism and the computerization design and the software which constitutes always to call. The integration of machinery development also has become one to have until now own system new discipline, not only develops along with the science and technology, but also entrusts with the new content .But its basic characteristic may summarize is: The integration of machinery is embarks from the system viewpoint, synthesis community technologies and so on utilization mechanical technology, microelectronic technology, automatic control technology,

外文翻译机械手

Hand Column Type Power Machine Follow with our country the rapid development of industrial production, rapidly enhance level of automation, implementation artifacts of handling, steering, transmission or toil for welding gun, spraing gun, spanner and other tools for processing, assembly operations for example automation, should cause the attention of people more and more. Industrial robot is an important branch of industrial robots. It features can be programmed to perform tasks in a variety of expectations, in both structure and performance advantages of their own people and machines, in particular, reflects the people's intelligence and adaptability. The accuracy of robot operations and a variety of environments the ability to complete the work in the field of national economy and there are broad prospects for development. With the development of industrial automation, there has been CNCmachining center, it is in reducing labor intensity, while greatly improved labor productivity. However, the upper and lower commonin CNCmachining processes material, usually still use manual or traditional relay-controlled semi-automatic device. The former time-consuming and labor intensive, inefficient; the latter due to design complexity, require more relays, wiring complexity, vulnerability to body vibration interference, while the existence of poor reliability, fault more maintenance problems and other issues. Programmable Logic Controller PLC-controlled robot control system for materials up and down movement is simple, circuit design is reasonable, with a strong anti-jamming capability, ensuring the system's reliability, reduced maintenance rate, and improve work efficiency. Robot technology related to mechanics, mechanics, electrical hydraulic technology, automatic control technology, sensor technology and computer technology and other fields of science, is a cross-disciplinary integrated technology. Current industrial approaches to robot arm control treat each joint of the robot arm as a simple joint servomechanism. The servomechanism approach models the varying dynamics of a manipulator inadequately because it neglects the motion and configuration of the whole arm mechanism. These changes in the parameters of the controlled system sometimes are significant enough to render conventional feedback control strategies ineffective. The result is reduced servo response speed and damping, limiting the precision and speed of the end-effecter and making it appropriate only for limited-precision tasks. Manipulators controlled in this manner move at slow speeds with unnecessary vibrations. Any significant performance gain in this and other areas of robot arm control require the consideration of more efficient dynamic models, sophisticated control approaches, and the use of dedicated computer architectures and parallel processing techniques. Manipulator institutional form is simple, strong professionalism, only as a loading device for a machine tools, special-purpose manipulator is attached to this machine.

at89c52单片机中英文资料对照外文翻译文献综述

at89c52单片机简介 中英文资料对照外文翻译文献综述 A T89C52 Single-chip microprocessor introduction Selection of Single-chip microprocessor 1. Development of Single-chip microprocessor The main component part of Single-chip microprocessor as a result of by such centralize to be living to obtain on the chip,In immediate future middle processor CPU。Storage RAM immediately﹑memoy read ROM﹑Interrupt system、Timer /'s counter along with I/O's rim electric circuit awaits the main microcomputer section,The lumping is living on the chip。Although the Single-chip microprocessor r is only a chip,Yet through makes up and the meritorous service be able to on sees,It had haveed the calculating machine system property,calling it for this reason act as Single-chip microprocessor r minisize calculating machine SCMS and abbreviate the Single-chip microprocessor。 1976Year the Inter corporation put out 8 MCS-48Set Single-chip microprocessor computer,After being living more than 20 years time in development that obtain continuously and wide-ranging application。1980Year that corporation put out high performance MCS -51Set Single-chip microprocessor。This type of Single-chip microprocessor meritorous service capacity、The addressing range wholly than early phase lift somewhat,Use also comparatively far more at the moment。1982Year that corporation put out the taller 16 Single-chip microprocessor MCS of performance once

机械类毕业设计外文翻译

本科毕业论文(设计) 外文翻译 学院:机电工程学院 专业:机械工程及自动化 姓名:高峰 指导教师:李延胜 2011年05 月10日 教育部办公厅 Failure Analysis,Dimensional Determination And

Analysis,Applications Of Cams INTRODUCTION It is absolutely essential that a design engineer know how and why parts fail so that reliable machines that require minimum maintenance can be designed.Sometimes a failure can be serious,such as when a tire blows out on an automobile traveling at high speed.On the other hand,a failure may be no more than a nuisance.An example is the loosening of the radiator hose in an automobile cooling system.The consequence of this latter failure is usually the loss of some radiator coolant,a condition that is readily detected and corrected.The type of load a part absorbs is just as significant as the magnitude.Generally speaking,dynamic loads with direction reversals cause greater difficulty than static loads,and therefore,fatigue strength must be considered.Another concern is whether the material is ductile or brittle.For example,brittle materials are considered to be unacceptable where fatigue is involved. Many people mistakingly interpret the word failure to mean the actual breakage of a part.However,a design engineer must consider a broader understanding of what appreciable deformation occurs.A ductile material,however will deform a large amount prior to rupture.Excessive deformation,without fracture,may cause a machine to fail because the deformed part interferes with a moving second part.Therefore,a part fails(even if it has not physically broken)whenever it no longer fulfills its required function.Sometimes failure may be due to abnormal friction or vibration between two mating parts.Failure also may be due to a phenomenon called creep,which is the plastic flow of a material under load at elevated temperatures.In addition,the actual shape of a part may be responsible for failure.For example,stress concentrations due to sudden changes in contour must be taken into account.Evaluation of stress considerations is especially important when there are dynamic loads with direction reversals and the material is not very ductile. In general,the design engineer must consider all possible modes of failure,which include the following. ——Stress ——Deformation ——Wear ——Corrosion ——Vibration ——Environmental damage ——Loosening of fastening devices

机械手外文翻译 修改版

密级 分类号 编号 成绩 本科生毕业设计 (论文) 外文翻译 原文标题Simple Manipulator And The Control Of It 译文标题简易机械手及控制 作者所在系别机械工程系 作者所在专业xxxxx 作者所在班级xxxxxxxx 作者姓名xxxx 作者学号xxxxxx 指导教师姓名xxxxxx 指导教师职称副教授 完成时间2012 年02 月 北华航天工业学院教务处制

译文标题简易机械手及控制 原文标题 Simple Manipulator And The Control Of It 作者机电之家译名JDZJ国籍中国 原文出处机电之家 中文译文: 简易机械手及控制 随着社会生产不断进步和人们生活节奏不断加快,人们对生产效率也不断提出新要求。由于微电子技术和计算软、硬件技术的迅猛发展和现代控制理论的不断完善,使机械手技术快速发展,其中气动机械手系统由于其介质来源简便以及不污染环境、组件价格低廉、维修方便和系统安全可靠等特点,已渗透到工业领域的各个部门,在工业发展中占有重要地位。本文讲述的气动机械手有气控机械手、XY轴丝杠组、转盘机构、旋转基座等机械部分组成。主要作用是完成机械部件的搬运工作,能放置在各种不同的生产线或物流流水线中,使零件搬运、货物运输更快捷、便利。 一.四轴联动简易机械手的结构及动作过程 机械手结构如下图1所示,有气控机械手(1)、XY轴丝杠组(2)、转盘机构(3)、旋转基座(4)等组成。 图1.机械手结构 其运动控制方式为:(1)由伺服电机驱动可旋转角度为360°的气控机械手(有光电传感器确定起始0点);(2)由步进电机驱动丝杠组件使机械手沿X、Y轴移动(有x、y轴限位开关);(3)可回旋360°的转盘机构能带动机械手及丝杠组自由旋转(其电气拖动部分由直流电动机、光电编码器、接近开关等组成);(4)旋转基座主要支撑以上3部分;(5)气控机械手的张合由气压控制(充气时机械手抓紧,放气时机械手松开)。 其工作过程为:当货物到达时,机械手系统开始动作;步进电机控制开始向下

MCS_51系列单片机中英文资料对照外文翻译文献综述

MCS-51系列单片机 中英文资料对照外文翻译文献综述 Structure and function of the MCS-51 series Structure and function of the MCS-51 series one-chip computer MCS-51 is a name of a piece of one-chip computer series which Intel Company produces. This company introduced 8 top-grade one-chip computers of MCS-51 series in 1980 after introducing 8 one-chip computers of MCS-48 series in 1976. It belong to a lot of kinds this line of one-chip computer the chips have, such as 8051, 8031, 8751, 80C51BH, 80C31BH,etc., their basic composition, basic performance and instruction system are all the same.8051 daily representatives-51 serial one-chip computers. A one-chip computer system is made up of several following parts: (1) One microprocessor of 8 (CPU). ( 2) At slice data memory RAM (128B/256B),it use not depositing not can reading /data that write, such as result not middle of operation, final result and data wanted to show, etc. (3) Procedure memory ROM/EPROM (4KB/8K B ), is used to preserve the

基于solidworks机床夹具设计外文翻译详解

2604130359 CNC Cutting Technology Review Numerical control high speed cutting technology (High Speed Machining, HSM, or High Speed Cutting, HSC), is one of the advanced manufacturing technology to improve the machining efficiency and quality, the study of related technology has become an important research direction of advanced manufacturing technology at home and abroad. China is a big manufacturing country, in the world of industry transfer to accept the front instead of back-end of the transfer, to master the core technology of advanced manufacturing, or in a new round of international industrial structure adjustment, our country manufacturing industry will further behind. Imminent research on the theory and application of advanced technology. 1, high-speed CNC machining meaning High speed cutting theory put forward by the German physicist Carl.J.Salomon in the last century and early thirty's. He concluded by a lot of experiments: in the normal range of cutting speed, cutting speed if the increase, will cause the cutting temperature rise, exacerbating the wear of cutting tool; however, when the cutting speed is increased to a certain value, as long as more than the inflection point, with the increase of the cutting speed, cutting temperature can not rise, but will decline, so as long as the cutting speed is high enough, it can be solved very well in high cutting temperature caused by tool wear is not conducive to the cutting problem, obtained good processing efficiency. With the development of manufacturing industry, this theory is gradually paid more attention to, and attracted a lot of attention, on the basis of this theory has gradually formed the field of high-speed cutting technology of NC, relatively early research on NC High-speed Machining Technology in developed countries, through the theoretical basis of the research, basic research and applied research and development application, at present applications have entered the substantive stage in some areas. The high-speed cutting processing category, generally have the following several kinds of classification methods, one is to see that cutting speed, cutting speed over conventional cutting speed is 5-10 times of high speed cutting. Also has the scholar to spindle speed as the definition of high-speed processing standards, that the spindle speed is higher than that of 8000r\/min for high speed machining. And from the machine tool spindle design point of view, with the product of DN diameter of spindle and spindle speed, if the value of DN to (5~2000) * 105mm.r\/min, is considered to be of high speed machining. In practice, different processing methods, different materials, high speed cutting speed corresponding to different. Is generally believed that the turning speed of (700~7000) m\/min, milling speed reaches m\/min (300~6000), that is in the high-speed cutting. In addition, from the practical considerations, high-speed machining concept not only contains the high speed cutting process, integration and optimization also contains the process of cutting, is a

相关文档
最新文档