MTK 手机使用说明书

MTK 手机使用说明书
MTK 手机使用说明书

Mobile manual

Mesh recorded

CHAPTER 1 BASIC KNOWLEDGE错误!未定义书签。

1.1 INTRODUCTION (5)

1.2A NN ALL SHALL KNOW (5)

1.3G ENERAL ATTENTION (6)

1.4OF MOBILE PHONE USE THE MATTERS NEEDING ATTENTION ........................ 错误!未定义书签。

1.5BATTERY-POWERED PRECAUTIONS错误!未定义书签。

1.6POINTS FOR ATTENTION OF USE CHARGER (9)

1.7 CLEANING AND MAINTENANCE (10)

1.8GENERAL MATTERS NEEDING ATTENTION (10)

C HAPTER 2 BEFORE USE ........ 错误!未定义书签。

2.1 TECHNICAL PARAMETERS ... 错误!未定义书签。

2.2SIM CARD (12)

2.2.1 SIM card inserts and remove (13)

2.2.2 T - FLASH card inserts and remove (13)

2.3 BATTERY ............ 错误!未定义书签。

2.3.1Batteries remove and installation (13)

2.3.2Battery charge (14)

2.4 switch calls (15)

Chapter 3 basic description (16)

3.1T HE KEYBOARD IS INTRODUCED (16)

3.1.1The basic key (16)

3.1.2Other shortcuts (16)

3.2 PHONE FUNCTIONS....... 错误!未定义书签。

3.2.1call (17)

3.2.2Answer telephon (19)

3.2.3Refused to telephone (19)

CHAPTER 4 DETAILED INTERFACE MENU (21)

4.1 Call Setup (21)

4.1.1 Call History(to SIM card 1 and 2 separate record) SIM card (21)

4.1.2 General Call Settings(to SIM1 and SIM2 separate record) (22)

4.2 multimedia (24)

4.2.1The camera............... 错误!未定义书签。

4.2.2album (25)

4.2.3 Video video editor...... 错误!未定义书签。

4.2.4 Video player (26)

4.2.5 Music player ............ 错误!未定义书签。

4.2.6 The recording (26)

4.2.7 FM radio .............. 错误!未定义书签。

4.3 PHONEBOOK (21)

4.4Scene mode (28)

4.4.1 General pattern (28)

4.4.2Conference pattern (29)

4.4.3Outdoor mode (29)

4.4.4Indoor model (29)

4.4.5Headset mode (29)

4.4.6Bluetooth mode (29)

4.5 information (29)

4.5.1 SMS (note: the following please to SIM1, SIM2 were set respectively) (29)

4.5.2 MMS (note: the following please to SIM1 SIM2 on set respectively) (33)

4.5.3chat (35)

4.5.4E-mail (36)

4.5.5voicemail (36)

4.5.6Community radio (36)

4.6O RGANIZER (36)

4.6.1calendar (36)

4.6.2todo (37)

4.6.3Alarm clock (37)

4.6.4World time (38)

4.6.5Extra (38)

4.6.6Network services (38)

4.6.7 bluetooth (41)

4.7S ETTINGS (45)

4.7.1Free a wering function (45)

4.7.2Mode Settings (45)

4.7.3 Mobile phone Settings (46)

4.7.4Network Settings (47)

4.7.5Security Settings (47)

4.7.6Recovery factory set (49)

4.8F UN AND GAMES (49)

4.9F ILE MANAGEMENT (50)

Phone calls menu (50)

CHAPTER 5 COMMON PROBLEM (51)

5.1W HY MOBILE APPEAR "INSERT SIM CARD" THE WORDS? (52)

5.2PIN,PUK PIN2,PUK2 YARDS, AND LIMIT THE PASSWORD QUERY AND MATTERS NEEDING ATTENTION: (52)

5.3O FTEN DROP NETS TO HAPPEN (52)

5.4E ACH OTHER CAN'T HEAR VOICE (52)

5.5D ON'T CHARGING OR CHARGING DON'T SHOW (53)

5.6S IGNAL SOMETIMES NO (53)

5.7P HONE UNABLE TO DIAL OUT (53)

5.8M OBILE PHONE STANDBY TIME IS SHORT (53)

Chapter 1 basic knowledge

1.1 introduction

Thank you for choosing this series backlit mobile phones.

The first use of this product before, please make sure that you read carefully random distribution of all material, this will help you to better use this product, comprehensively understand this cell phone use, appreciate the perfect function and simple operation methods.

Cixin labeled as a mobile phone is aimed at GSM/GPRS network environment and design. In addition to basic call functions, but also provides you with including video camera, music player, the player, MMS, e-books, recording, chord bell ring, clock/alarm clock, world time, many practical function, to facilitate your work and leisure activities, in addition, the use of personalized human-machine interface, the perfect function design, can satisfy your different demands. Moreover also provides magic sound function, short message backup to T card, anti-theft tracking function, mobile answering function.

This color phone conform to GSM/GPRS technical specification, and obtains the domestic and international authoritative institutions authentication.

The company reserves in not to make any advance notice under the condition of the contents of this manual revision rights.

1.2 Ann all shall know

if your phone is lost or stolen, please immediately notify telecom departments or DaiXiaoDian to disable the mobile phone and the SIM card. This will

make you from others take call bring economic losses. when you with telecom departments or DaiXiaoDian contact, they need to know your phone IMEI number (printed on the phone back on their labels, remove the battery can be found). Please send this number appropriate is custodial, for future need.

to make your mobile phone from misuse, please take preventive measures, such as:

- all set up mobile phone SIM card to the PIN number, and in others know what time before modification.

-leave when a car, please don't take phone on visible place, had better carry or lock in luggage.

-sets the call restrictions。

-sets the burglar tracking。

1.3 General attention

your mobile can only use this company designated the battery and charger. Use other products may cause battery leakage, overheating, burst and fire.

do not violent collisions, vibration or throwing mobile phone, lest fault happens and fire。

don't take the battery charger, mobile phone, put in the microwave oven or high-pressure device, otherwise may cause circuit damage and fire wait for contingency.

Do not have inflammable and explosive gas place use mobile phones, this could cause handset malfunction and fire.

do not put a high temperature and high humidity mobile phone or mass dust place, otherwise it may cause failure.

turn your mobile phone placed on children any hard-to-reach places lest children take it for toys, caused personal injury.

do not take phone on uneven or the instability of

the mesa, prevent drop caused by fault or damage. 1.4 of mobile phone use the matters needing attention on the plane, hospitals etc forbids the use of mobile phone of place please cellphones. Mobile phones can affect electronic equipments and medical instruments work normally, in these places use mobile phone, please follow this place and relevant regulations. Mobile phone has regularly automatic startup function, please check your alarm to confirm your mobile phone in aircraft flight process will not automatically boot.

do not in weak signal or high precision electronic equipment near using a mobile phone. Radio interference may cause electronic equipment wrong operation and other problems. Especially in the following equipment near special attention should be: hearing AIDS, pacemakers and other medical electronic equipment, fire detectors, automatic and other automatic control device. Mobile phones to pacemakers and other medical electronic equipment influence consult this equipment manufacturers or local vendors. do not charge the LCD forcibly or use it knocks other things, otherwise, it will cause the breakage and LCD LCD panels liquid leakage. If LCD liquid into eyes will have the blindness of the danger. Then please immediately flush with water eyes (don't rub eyes) and to hospital.

do not remove or refitted mobile phone, otherwise, it will cause the damage, leakage and circuit faults. in very rare cases, cell phone in some type of car when using may in vehicles, electronic equipment have undesirable effect. Then please do not use a mobile phone for fear of losing security guarantees。

do not use a needle and written etc sharp-pointed

things buttons or mobile phone screen, otherwise it will damage mobile phones or produce false operation. if antenna was damaged, please do not use mobile phones, otherwise it may cause damage to personal. avoid mobile phone card too close and magnetic objects, mobile phone radiation wave may remove floppy disk, store the gold card, credit card store information.

please will pushpin small metal put off cell phones earpiece place. The speaker to work with magnetic, will attract these small metal, and may harm or damage to personal phone.

avoid mobile damp, water or other liquids into mobile phones can cause mobile overheating, leakage and failure.

1.5 battery-powered precautions

don't take the battery it to fire, otherwise, it will lead to the battery fire and explosion。

install batteries, don't forcibly pressure, otherwise it will cause battery leakage, overheating, burst and fire.

do not use wire, needle etc metal short circuit batteries, nor will the battery with necklace metals put together, it could lead to battery leakage, overheating, burst and fire.

do not welding battery end, it could lead to discharge, overheating, burst and fire。

if battery liquid into eyes will have the blindness of the danger, then please do not use rub your eyes, rinse with water and then immediately to the hospital.

do not disassemble or remodel battery, it could lead to battery leakage, overheating, burst and fire. do by fire or high temperature, such as place to

use heater or place battery, it could lead to battery leakage, overheating, burst and fire.

if the battery in use, charging or preserved process has changed, deformation temperature, the abnormal phenomenon, please stop using and replace the new battery.。

if battery liquid met skin, clothes, this may cause skin burns, immediately flush with water, when necessary, please immediately seek medical attention if battery leakage of liquid or a strange odor, please immediately remove it from flame took the open, avoid fire and explosion.

do not make the battery moist, otherwise it will cause battery overheat, smoke and corrosion。

do not in direct sunlight or car near high temperature place to use or placed battery, otherwise, it will lead to the liquid leakage and overheating, may reduce the performance, shorten service life.

do not continuous charging more than 24 hours。

1.6 points for attention of use charger

please use 220V alternating current. Use other voltage causes creepage, fire and for mobile phone and charger damage.

banned short-circuit charger, otherwise it will cause shock, smoke and charger damage.

please don't in the power cord damage using charger, it could lead to fire and shock.

please timely cleaning product in outlet of dust。 please don't put water containers, etc in charger beside, lest water splashes overheating, leakage caused charger and failure.

if charger into contact with water or other liquids, immediately the power from the socket pull down to prevent overheating, fire, electric shock and

charger fault。

please do not remove or refitted charger, otherwise, it will lead to injury, get an electric shock, fire and charger damage.

please don't in the bathroom contour humidity areas use charger, it could lead to get an electric shock, fire and charger damage.

please do not use wet hand contact charger, wires and power socket, otherwise, it will lead to get an electric shock.

don't will clog on the power line wires or refitted, otherwise, it will cause shock and fire.

in cleaning and maintenance before please first will power plug from the socket pulled。

pull plug must hold the charger, pull the cord can be damaged wires, cause electric shock and fire。

1.7 cleaning and maintenance

mobile phones, battery and charger without waterproof properties in high humidity, do not use bathroom where, also should be avoided by rain.

with soft dry cloth clean mobile phones, battery and charger.

do not use alcohol, diluent or benzene etc solution to wipe mobile phones。

have dirt socket can lead to poor contact, power lost, which couldn't be recharged, please regular cleaning。

1.8 general matters needing attention

Mobile phone:

please in 5 ℃ ~ 40 ℃ temperature and 35% ~ 85% of humidity using a mobile phone.

please as far away from the ordinary telephone, TV and radio and office automation equipment place use mobile phones, lest affect these devices and cell phone

use effect.

The battery:

please place the battery in from the sun, a cool ventilated place。

mobile phone battery life is limited. The battey using time in frequent recharge gradually shortened. Many times when charging invalid, explain battery life already exert, it should be replaced designated models of new battery.

don't will old battery thrown into general life rubbish in. In expressly used batteries processing of place please according to the regulation of instructions。

charger:

please don't in the following places charge: sunshine point-blank place: Outside temperature below 5 ℃ or above 40 ℃ place: Damp, dusty places or vibration bigger place (can cause failure); Television, radio and so on electric near (affect images, sound effect).

CHAPTER 2 BEFORE USE

2.1 technical parameters

host

Size (long x width x thick) mm× mm × mm weight g(contain batteries)

The battery Lithium ion

Nominal voltage 3.7V

Charging limit voltage 4.2V

Nominal capacity mAh

Continuous talk time

About 1.5 hours ~ 2.5 hours (depending on the network signal strength)

2.2 SIM card

Using mobile phone before you must first in inserting effective SIM card. SIM card is you into the digital GSM network keys.

Everything and establishing network connection relevant information and your call records initialization were recorded in the SIM card metal planar region, with the still has recorded in card in your SIM card in the telephone book store and receives the name, phone number and short messages. SIM card can be removed from your mobile phone, put any a GSM mobile phone use (automatic read SIM card).

In order to prevent loss and damage card the information, should avoid to touch, and metal planar region SIM card put away from electrical, magnetic place. SIM card once damaged, you will not enter the GSM network.

*Note: remove SIM card previous must turn off your cell phone. It is forbidden to have the external power source linked cases insert or remove SIM card, otherwise SIM card may be damaged。

2.2.1SIM card inserts and remove

SIM card commonly on a card, in assembly before, must be careful to take out its。

cellphones, and remove the battery and other external power supplies。

will SIM card reference gap direction, insert SIM gets stuck. (cell phone for double card machine, please click tip inserts SIM1 or SIM2)

when you need to remove SIM card, please first shutdown, take down the battery, again from SIM gets stuck out the SIM card.。

2.2.2 T - FLASH card inserts and remove

T - FLASH card on the mobile phone T - FLASH card slot, in insert and remove T - FLASH card must be closed cell phone, and other external power supply。

T - FLASH card into: T - FLASH card according to the will to the right direction arrow will card slot open, with metal face down into T - FLASH card slot, and then press left direction arrow will card button, card would be put away。

T - FLASH card removed: with T - FLASH card into the operation, the card can be removed.

2.3 battery

Initial state battery was about 50% of power, it can be used. New battery charging 14 hours, wait for at least the first completely finished (power exhausted unbootable) again after full of use, The second will thoroughly after using full of energy, so again three consecutive cycle, battery only can be used longer.

2.3.1Batteries remove and installation

disassembled take the following steps:

1.Downward pushed back, take cover under the battery。

2.The battery upwards but remove.

The battery upwards but remove:

1.The battery underside first card into the direction of battery shrapnel (note)。

2.The battery ShangCe downwards according to level off, the installation is complete。

2.3.2Battery charge

will charger plugged in。

will charger joint insert mobile phone to the bottom of the interface。

at this moment, mobile phone screen corner power instructions symbol will circulation flashing, If the fast-recharging is turned off, the screen will appear charging instructions of pictures, said the battery. If the phone in electricity shortage still overuse, charging after beginning may need some time will appear on the screen charging instructions symbols.

screen when the upper-right corner power instructions symbols show full, and no longer flashing, charging that has been finished. If is shutdown charging, the screen will show charge at the end of the picture. This process normally need 3 ~ 4 hours. Rechargeable batteries, mobile phones and charger during becomes hot, and this is normal.

charge after the completion of the disconnection of ac power socket and mobile phones and charger connection.

*note:

-fast-recharging must be placed on temperature for + 5 ℃ ~ 40 ℃ of ventilated place, and must use manufacturers offer charger. Use unauthorized charger may cause danger, and would violate this mobile phone recognition and warranty terms。

-when the phone is automatic shutdown or display

electricity shortage warning "electricity shortage" when, should promptly to the battery. If the battery charging before any unused, phone automatically reduce charging time.

-manufacturers to provide mobile phone standby and talk time is based on an ideal working environment. In be used actually, batteries work time with network status, work environment and use different ways of variations.

-fast-recharging please make sure battery has already installed, charging cannot take down the battery。

-after charging, please turn off your mobile phone and power disconnected with the charger。

-If you have no a charger and power supply, mobile phone disconnected, then after a relatively long time (about 5-8 hours), the battery power loss to a certain degree, cell phone and start charging. We recommend that you do not such operation, because it will be on your battery performance and life expectancy cause certain effect.

Use USB and use a webcam function

USB attachment end at the computer, another end answer your mobile base. Fast-recharging, battery power grid number in the icon changes state until full of so far. Shutdown after with PC connections, or after startup choose "storage device" as U dish, can use with computer for data transmission.

after startup use USB cable to connect the cell phones and computers, choose the "network", mobile phone camera serves as a free rotating webcam that video chat with friends.

2.4 switch calls

to open monophone please hang machine long press

keys, Closed unit, please also long press on-hook keys. insert SIM card, automatic test this words chance SIM card is available。

then screen will appear the following tips in sequence:

-input PIN1 (if you set the SIM card password) (specific operation please see chapter 4 "menu detailed interface)"

-input cell phone password (if you set the monophone unlock password) (specific operation please see chapter 4 "menu detailed interface)"

SIM card decryption after the success, cell phone automatically search available network (screen, search the Internet). Once the contact network supplier name will appear on the screen of the central. Now said mobile normal into standby can be used normally.

*Note: if the screen suggests "EMERGENCY call EMERGENCY) limited (", means that you already in normal network coverage (service scope) outside, but you can still according to the signal strength send EMERGENCY calls。

Chapter 3 basic description

3.1The keyboard is introduced

3.1.1The basic key

left soft key:Press the execution menu commands, the machine is lower screen for into the main menu (select menu after identifying key)。

right soft key:Press enter phone book list menu options。

OK button:Standby interface, press enter music player interface and select menu after confirm function.

on-hook key:End the call or reject calls, Long press this button shutdown/boot, In other cases, click

this button general return standby.

3.1.2Other shortcuts

on the bond:On standby interface, press enter camera interface。

keys:On standby interface, press enter the alarm clock interface。

left-click:On standby interface, press enter scene mode interface。

right-click:On standby interface, press enter calendar interface。

FM:On standby interface, press enter FM radio interface。

*Note: in this manual "in a key" refers to press this button namely after loosen, "Long press a button" refers to press this button and keep 2 seconds or 2 seconds above.

3.2 phone functions

When network provider logo appears on the screen, you can call or phone. Display in the upper-left corner of the signal stick show network signal strength (including 4 message when the signal is the strongest). Call quality greatly influenced by obstacles, so in the small scope of mobile can effectively increase the conversation quality.

3.2.1call

domestic phone calls:

Using digital key input, phone number, then press the corresponding SIM card dial-up button to start the call. If need to change the phone number, according to the right soft key delete input characters. When the screen will show the dialing dial-up animation. Each other after off-hook will display screen calls state information, if opened through to prompt, will also have a voice prompt (need network support).

Call after please click on-hook key hang up the phone。

M&n + telephone number + dial-up keys

dialing fixed telephone extension:

Some fixed telephone extension cannot direct phone, you need to have helpline switchboard, again dial extension. If you enter phone number when, the switchboard number and extension number between insert symbols suspended character "P", the machine will finish all for you dial, automatic dial-up extension. Input "P" is the method of long press * keys (right now display will display symbol "P")

Code number + P + + operator extension number + dial-up

keys

suspended characters use examples:

For example: if you in 8880000 number has a dial-up ways to use voice mailbox system, mailbox number is 6666 and password for eight thousand eight hundred and eighty eight. So you can push the following way dial-up:

8880000 P 6666 P 8888

The number of the first part number for voice mailbox system dialing。

Telephone, then issued by response 6666 to choose mailbox。

In cryptography, the second pause before eight thousand eight hundred and eighty eight issued symbol will produce 5 seconds delay (the first P says, after waiting for the telephone connected the P says 5 seconds delay)。

international telephone:

To make an international call, but long press * keys, until screen appear international long-distance telephone prefix symbol "+", which will allow you to

do not know at the local international telephone prefix number (for example, in China is 00) from any one country call.

Input prefix number after you want to call, then input prefix and complete the country's telephone number. Country code according to the usual practice, Germany, Britain for 49 for 44, Sweden for 46, etc。

And usually make international telephone same, should remove city dial-up prefix front "0"。

For example: from other countries call service hotline, should dial:

+86 21 114

+ country code + complete telephone number + dial-up

keys

emergency calls:

If the phone in network coverage area (can pass examination cell phone screen in the upper-left corner of the network signal strength instructions bar that), you should be able to call the emergency services (even without SIM card can also make emergency calls). If your network provider does not provide roaming services in the region, the screen will show "EMERGENCY call EMERGENCY) limited (", tell you only this call。

3.2.2Answer telephone

normally, incoming, according to answer keys can be answered. If set up any key to answer for open, then press any key to answer the phone.

if headset has planted, you can also use headphones on buttons to answer the phone. If you do not convenient key-press, can set up automatic answer for open, and headset has planted in the ringing or vibration 5 seconds later, phone automatically through。

3.2.3Refused to telephone

三星SPen功能实用技巧

三星()「」功能实用技巧: 三星(、、、)等手机同样适用,以其独特地「」功能,一上市后就在全球热卖,被视为最能威胁地劲敌.不过对于有些玩家还不是很会运用该功能,今天就给大家搜集整理了个高效率实用技巧,让你轻松玩转“妞儿”文档来自于网络搜索 、视线离开屏幕,自动执行休眠 为了节省电力、增加续航力,通常我们在使用智能手机同时都会将屏幕休眠时间设在~秒之间,但如果你在看书或者浏览网页,需要超过屏幕设定地休眠时间,在不做任何动作地情况上,屏幕自动关闭总是让人觉得困扰,因此上地智慧休眠功能更为实用!这功能通过判定使用者眼睛是否正在观看屏幕地机制,智能控制屏幕地开关,使用上更为人性化.文档来自于网络搜索 设置方法: 进入设定,选择显示,勾选智慧休眠选项即可. 、让手机贴耳即拨号 当你编辑短信或邮件写到一半时,突然觉得好要输入地东西太多,直接打电话比较快,这时候你就会需要用到「体感拨号」这个功能,不需要再从联络人或通话纪录去进行拨打电话地动作,直接从编辑地界面,将手机贴近脸部,像平常拿手机讲电话般地动作,就直接帮你打给对方了.文档来自于网络搜索 设置方法: 进入设定,选择动作设定,勾选体感拨号即可. 、光感讯息,免触控解锁 有时候,想要打开手机屏幕,却又懒得在屏幕锁定状态下唤醒手机,有没有可以偷懒地方法?地「光感讯息」,能给你一个全新地体验,在屏幕锁定状态下,还可以立即检视时间、未接来电与简讯等重要讯息,且无须等待,也不会遗漏任何重要资讯.文档来自于网络搜索 设置方法: 进入设定,选择动作设定,勾选光感讯息即可.在屏幕锁定与不唤醒地状态下,将手掌轻轻遮住手机上方,即可启动「光感讯息」功能.(光感讯息启动是靠手机正面感应元件,手掌务必要遮住前镜头旁地感应元件,才能启动光感讯息).文档来自于网络搜索 、通话中,随时开启记事 在使用手机或是接起电话地时候,应该都会遇到需要立即记下通话中重要事情地经验,如果你周遭刚好没有纸笔该怎麼办?那不妨通过,快速开啟来记事吧!文档来自于网络搜索 设置方法: 通话中,将抽出笔槽,并将通话从「听筒」模式,切换成「免持」模式.然后使用手中地,按住上地按钮,接着在手机屏幕上连续点击两下,就能开启开始记事了!文档来自于网络搜索 、将云端空间音乐档变成手机铃声 自定义铃声可能是某水果品牌使用者心中永远地痛,不仅设定繁琐,还需连接电脑才能使用. 在此部分地操作非常简单,只要几个步骤就可以在手机内完成,甚至可透过或之类地云端储存服务,抓取你需要地音乐做為铃声,设定可说是相当方便. 文档来自于网络搜索 设置方法: 进入设定,选择音效>装置铃声,看到下面地新增,点击它,这时你能看到几个软件选项,如果你想使用地是手机内部地音乐,只要选择【音乐播放器】即可浏览.但如果你有

智能手机使用说明

智能手机使用说明 有智能些手机是一体机,不能拆开电池,没电的时候用充电器充电,觉得麻烦就用移动电源来充电。 一、主屏幕 首先是首页屏幕,如左图所示 电话图标的打开来就如右图 输入号码按下面“呼叫”即 可,如果输入有误,就按号码右边的箭 头来删除数字 右图的页面手指往右拉可以看到通话 记录,往右拉可以看到通讯录等等。 这个图标打开来的是手机信息 这个图标打开是上网建议可以不常 用 这个图标是照相机,拍照功能 这个是返回键,点击这个键,屏幕会返回上一个页面 这个是首页键,点击这个键,页面会返回左上的首页界面 最近使用的应用程序键,按这个键会出现一些你最近使用的应用程序的缩略图,点击缩略图就会进入相应的程序 中间这个小九方格,点击它就会出现下一页图的主屏幕界面

主屏幕界面,手机里的应用程序都在这里,手机 自身带的程序不更改和卸载,自己自行下载到手机里 的应用程序可以更新和卸载。 设置手机壁纸:设置→个性化设置→壁纸 更换来电铃声:设置→个性化设置→铃声 更换信息铃声:设置→个性化设置→通知音 调整手机亮度:设置→显示和手势→亮度 调整手机音量:设置→声音→音量 查看手机存储:设置→存储 设置闹钟:点击“时钟”,会出现闹钟界面,里面应该有三个未选取的闹钟,点击其中一行,出现闹钟设置页面,最上面是设置时间的,下面“重复”那里是选取日期的,点击“重复”,会出现周一到周日,要哪天就点击一下相应天的右边小方框,出现蓝色小勾就是选取成功,再点击右下角的“确定”键,回到闹钟设置页面再点击右下角的“完成”键,再确认刚一下所设置的那一行闹钟右边方框是否也打了蓝色小勾。不用闹钟的时候点击一下蓝色小勾,让它变成原本那个白色小方框,闹钟就不再工作。 上图往下拉还有如左图这些应用程序,其中后面三行都是我下载的,其中大部分是需要连接网络才能够使用,也有不用 连接网络及可以使用的。如果不喜欢想删除掉可以在“设置” →“应用程序”那里面卸载掉,所有不是机身自带另外再下 载进来的程序都会在“应用程序”里面显示,想卸载哪个程序 就点击一下,然后在弹出来的应用程序信息页面上再点击一下 “卸载”就可以把它卸载掉。机身自带的程序删除不了。 当你要下载东西进手机的时候,必须查看一下是否打开了“未知源”选项(设置→安全→未知源)就是说查看一下未知 源右边的小方框有没有打上勾,因为当未知源选项没有勾取的 时候,什么程序也下载不进去手机里面,起着一个保护作用, 但是要下载东西的时候必须先把它勾取。

三星手机工模说明

CDMA测试手机介绍 一、以三星X199手机为例进行介绍,实物图如下: 1、进入工程模式的方法:按“M+8+*”――输入密码123580――出现诊断画面――按OK 键――出现所有诊断画面――按OK键。 2、退出工程模式的方法:按“M+8+*”――输入密码123580――出现诊断画面――按OK 键――出现所有诊断画面――按OK键。 二、测试模式的第一页:CDMA Monitor S14136 N000011 CH0283 P6 SLOT_I:0 PN438 D064 -05 N T-63 wc01 S02 (F)SCHAN-00X SO:0000 BS 00371 L1:ON L2:ON RSSI069 S14136 N000011 CH0283 P6 SLOT_I:0 PN438 D064 -05 N T-10 wc08 S02 F000.35% TE1RE1 SO:0003 BS 00371 L1:OFF L2:ON RSSI066 待机时画面通话中画面 1、S14136:系统识别码(SID) 􀂾 一般一个地市只有1个SID码,用于辨别手机是否漫游,每个地市的SID码不一样。 2、N000011:网络识别码(NID) 􀂾 中国只有一个CDMA网络,所以在全国范围内NID码都一样。 3、CH0283:表示信道号为283,对应的频率为878.49MHZ 􀂾 CDMA网络共有7个信道号,分别是37、78、119、160、201、242、283。 􀂾 频率与信道号的换算关系:F=870+CH×0.03 4、PN438:表示PN码为438,是属于第三扇区。 􀂾 PN码用于区分不同的小区。一个基站三个小区,每个小区相差168个PN,当PN偏置为4时,第一个小区的PN码范围为4-168,第二小区的PN码范围为172-340,第三个小区的PN码范围为344-511。 5、D064:表示手机接收功率为-64dBm 6、-05:表示Ec / Io 值为-5DB 7、T-10:表示TxAdj的参数,即是手机自动调整增益。 􀂾 当手机待机情况下显示为T-63,TxAdj与RxPower、TxPower的关系为:RxPower +TxPowe-TxAdj=-73。 8、wc08 :表示前向信道,使用业务信道08 􀂾 Walsh码用于区分不同的前向信道,W0O为导频信道,W01—07为寻呼信道,W32为同步信道,W08—31和W33—63为业务信道。

智能手表手机说明书资料

目录 产品说明 产品组成-------------------------------------------------5 外观及按键----------------------------------------------6 产品特征-------------------------------------------------9 使用前的准备 电池充电--------------------------------------------10 安装SIM卡-----------------------------------------11 开通移动网络服务--------------------------------12 开通平台服务-----------------------------------13 使用说明 时间显示------------------------------------------------ 15 电话------------------------------------------------------16 脉搏测量-------------------------------------------------17 计步管理-------------------------------------------------18 GPS定位--------------------------------------------------19 设置------------------------------------------------- ------20 跌倒报警------------------------------------------------ 21 SOS一键拨号------------------------------------------22 亲情号码一键拨号-----------------------------------23 产品规格------------------------------------------------ 33 注意事项------------------------------------------------ 35 质量保证书/保修卡------------------------------ ---40 产品的组成 1 手表本体2 充电器&充电线 3 USB耳机4 使用说明书 5 合格证6 内置锂电池一块 外观及按键

三星手机使用说明

三星手机使用说明 1、删除屏幕上多余的应用图标: 按住屏幕上多余的应用图标,屏幕右上角会出现“移除”选项,直接拖动多余图标到“移除”选项上,即可删除。 2、在“联系人”中查找相关人员拨打电话: 点击屏幕上“联系人”图标,找到需要的联系人,点击电话后面的绿色话筒图标即可。 3、添加新“联系人”和编辑已有的“联系人”: 点击屏幕上“联系人”图标,再点击右上角添加联系人图标,输入联系人姓名,电话等,再点击右上角储存即可。 点击屏幕上“联系人”图标,再点击需要修改的联系人,进入后,修改联系人姓名,电话等,再点击右上角储存即可。 4、查看手机通话记录: 点击屏幕上“手机”图标,在最上面一行,有四个选项,第一个选项是“键盘”,功能是直接输入电话号码拨打电话,第二个选项是“记录”,功能是查看之前的通话记录,第三、四个选项没有实际用途。5、编辑短信息: 点击屏幕上“信息”图标,进入后点击屏幕右上角“编辑信息”图标,再点击右上角“联系人”图标,点击需要的联系人前的方框后,会出现“√”,再点击右上角完成,完成后会自动跳转到编辑短信状态,选择拼音输入短信内容,再选择右下角哪个号码发送即可。

6、转发短信息: 点击屏幕上“信息”图标,点击想要转发的短信息,按住短信息内容,会出现多个选项,包括“删除”,“转发”等,点击转发,再点击右上角“联系人”图标,点击需要的联系人前的方框后,会出现“√”,再点击右上角完成,选择右下角哪个号码发送即可。 7、删除短信: 点击屏幕上“短信”图标,按住想要删除的短信,出现“删除”等选项,点击删除即可。 8、更换主屏幕和锁定屏幕图片: 按住屏幕的空白处,会出现“设置墙纸”选项,点击“设置墙纸”出现“主屏”、“锁定屏幕”和“主屏幕与锁定屏幕”三个选项。如果主屏幕与锁定屏幕使用同一个图片,可选择“主屏幕与锁定屏幕”选项,如果主屏幕与锁定屏幕使用不同图片,分别选择“主屏”、“锁定屏幕”,操作方法一样,以设置“主屏”为例,点击“主屏”选项,可以设置“动态墙纸”,“墙纸”,“相册”等,选择图片后,点击下方“设置墙纸”或右上角完成即可。 9、拍照和看照片: 点击屏幕上“应用程序”图标,找个“照相机”图标,点击进入,按屏幕下方的“拍照键”,或按键盘的“确定键”即可。 点击屏幕上“应用程序”图标,找个“照片”图标,点击进入,即可看到拍摄的照片。

智能手机使用说明

智能手机使用说明 有智能些手机就是一体机,不能拆开电池,没电的时候用充电器充电,觉得麻烦就用移动电源来充电。 一、主屏幕 首先就是首页屏幕,如左图所示 电话图标的打开来就如右图 输入号码按下面“呼叫”即可, 如果输入有误,就按号码右边的箭头来删 除数字 右图的页面手指往右拉 可以瞧到通话记录,往右拉可以瞧到通讯 录等等。 这个图标打开来的就是手机信息 这个图标打开就是上网建议可以不常用 这个图标就是照相机,拍照功能 这个就是返回键,点击这个键,屏幕会返回上一个页面 这个就是首页键,点击这个键,页面会返回左上的首页界面 最近使用的应用程序键,按这个键会出现一些您最近使用的应用程序 的缩略图,点击缩略图就会进入相应的程序 中间这个小九方格,点击它就会出现下一页图的主屏幕界面

主屏幕界面,手机里的应用程序都在这里,手机自身带 的程序不更改与卸载,自己自行下载到手机里的应用程序 可以更新与卸载。 设置手机壁纸:设置→个性化设置→壁纸 更换来电铃声:设置→个性化设置→铃声 更换信息铃声:设置→个性化设置→通知音 调整手机亮度:设置→显示与手势→亮度 调整手机音量:设置→声音→音量 查瞧手机存储:设置→存储 设置闹钟:点击“时钟”,会出现闹钟界面,里面应该有三个 未选取的闹钟,点击其中一行,出现闹钟设置页面,最上面就 是设置时间的,下面“重复”那里就是选取日期的,点击“重 复”,会出现周一到周日,要哪天就点击一下相应天的右边小方框,出现蓝色小勾就就是选取成功,再点击右下角的“确定”键,回到闹钟设置页面再点击右下角的“完成”键,再确认刚一下所设置的那一行闹钟右边方框就是否也打了蓝色小勾。不用闹钟的时候点击一下蓝色小勾,让它变成原本那个白色小方框,闹钟就不再工作。 上图往下拉还有如左图这些应用程序,其中后面三行都就是我下 载的,其中大部分就是需要连接网络才能够使用,也有不用连接网络 及可以使用的。如果不喜欢想删除掉可以在“设置”→“应用程序” 那里面卸载掉,所有不就是机身自带另外再下载进来的程序都会在 “应用程序”里面显示,想卸载哪个程序就点击一下,然后在弹出来 的应用程序信息页面上再点击一下“卸载”就可以把它卸载掉。机 身自带的程序删除不了。 当您要下载东西进手机的时候,必须查瞧一下就是否打开了“未知源”选项(设置→安全→未知源)就就是说查瞧一下未知源右边的 小方框有没有打上勾,因为当未知源选项没有勾取的时候,什么程序 也下载不进去手机里面,起着一个保护作用,但就是要下载东西的时 候必须先把它勾取。

三星手机购机识别翻新机及验机指南(精)

一. 三星手机购机识别翻新机及验机指南 购机验货: 1.仔细看屏幕内有无印痕,数据线,耳机孔,扬声器孔,挂带孔是否有灰尘 2.仔细看机身电池卡锁处有无拨痕,上下盖旋轴处有无旋印 3.仔细检查WAP和语音功能及通话纪录信息功能中有无记录 4.闻气味,新机器有檀香,在购买后10-12天消散,这种味道不同于一般的清洁剂和香水味.机身不能有粘粘的蜡和油(有的话就是被商家美容了) 5.仔细检查SIM卡接触点,机身电池接触点有无磨痕 6.看外壳的接缝处间隙是否均匀而且在1MM以下,有无撬痕,上盖内屏幕下两封点有无挑痕 7.与新机器对比按键的弹性和内外显示屏的亮度 8.仔细看机身的固定锣钉有无旋印,涂漆涂墨(可以用放大镜),商标有无撬痕 9.看划痕贴膜,新机都是一体压膜,原装膜内绝对不会有气泡,并且机器没有划痕 10.看出场日期,购机时间和出场日期一般不会相差2月.如果差距太大,则怀疑为翻新, 出场日期查询: 在电话拨号界面 输入*#0228# 然后按BACK 再按BACK 之后选2 (打开输入法输入数字2,以下类推) VERSIon INFORMATIon 在选2 HW-VERFR-CAL-DATE 再选4 READ CALDATE 我的查了后出场日期为:2010 09 25,购买日期为3月初,应该不是翻新或二手机. 11.看电话版本后是否带除版本以外字样,此类机器有电话锁,无法刷机.一般来讲,一些欧美定制机就有网络锁, 如O版,T-MOBILE版,正常的欧水,港版,亚太版都没有的.想知道I900有没网络锁很简单如下: 工程模式:*#7465625#,如果第二项“network lock”值为"disable"表示无网络锁,值为"enable"表示有锁。 还有一个方法是查版本:*#1234#,如果显示为: PDA:I900DZHG1/DZHG1 手机:三星i9000NSPRO 一定有锁. 12.识别机器的原产地

给老人的手机使用说明

给老人的手机使用说明 一、智能手机就像台小电脑,需要摸索使用。这台华为C8813DQ 是使用的安卓操作系统(Android 4.1.2),华为把安卓系统进行优化后,在华为手机上称为Emotion1.0系统,其本质就是安卓系统,只是使用界面的一些优化。 二、这台手机本是电信定制机,有不少电信定制软件,但我已请商家重刷为纯净版,去除了大部分电信定制软件,有少量去不掉的如“天翼wifi”之类,可以不用它。 三、打开手机后盖,注意是双卡双待机器,插电信卡的插槽是专用的,有标识,不要插错了,另外把上次买的那个8G的存储卡清空后,也插进去。 四、开机后屏幕中间解锁标记有上下左右四个方向,其中向下方向就是解锁,向左是解锁并直接进入电话界面,其他类似。 五、手机有快速指南,另外有电子版的详细说明书,通过qq发给你们 六、手机基本桌面很简单,最下面是常用功能,电话、联系人、短信,我吧微信和锁屏也放在那里了 七、桌面一共五页(可以增减),现在设置的第2页是主页,即放了天气和时钟那页,其中“设置”比较重要,可以重点看看;向左滑是第1页,是系统的基本功能程序;向右滑是第3页,是电信的一

些程序,不用管它;第4页暂时空白;第5页是我给你们下载安装的一些程序,可以使用。 八、要安装程序,可以在wifi状态下,用华为的“应用市场”(桌面第1页),也可以用“豌豆荚”(桌面第5页),或者把手机插在电脑上,在电脑上安装“豌豆荚”电脑版软件,通过电脑版豌豆荚管理手机 九、手机通讯录可以从SIM卡上复制,然后可以通过电脑(下载豌豆荚电脑版)管理,豌豆荚电脑版连接手机后,左边有这个图标 十、智能手机最重要是联网控制,防止上网流量超额(你的卡现在是200M每月)。以下请认真读: 2G/3G联网是手机卡上网,要钱;wifi联网是不要钱的,只要家里有无线路由就可以。防止手机卡上网流量超额的办法有二,注意(一)从顶端状态栏往下滑,调出这个界面

三星S8300c说明书 使用手册

网址 https://www.360docs.net/doc/7a2513233.html, 中国印刷编码:GH68-23230A 中文 08/2009 版本 1.2

GT-S8300C 使用说明书

使用本说明书感谢您购买三星手机。本手机基于三星高科技和高标准,为您提供高品质的移动沟通和娱乐。 本使用说明书专门用于指导您使用手机的功能。如欲迅速使用手机,请参照“手机简介”、“手机的安装和准备”以及“使用基本功能”。?使用本手机之前,请仔细阅读本使用说明 书,以确保安全和正确使用。 ?本使用说明书中的描述以手机默认设置为基础。指示图标 在开始使用前,请先熟悉本使用说明书中的图标: 警告-可能伤及自己或他人。 小心-可能损坏手机或其它设备。 注意-注释、使用提示或附加信息。 ii

使用本说明书 iii 版权信息 本机采用的所有技术和产品的权利归各自的所有 人所有: ?Bluetooth ? 是世界各地Bluetooth SIG 公司的注册商标-蓝牙QD ID :B014869。 ?Java TM 是Sun Microsystems 公司的商标。?Windows Media Player ?是微软公司的注册商标。?和是SRS Labs 公司的商标。CS 耳机和WOW HD 技术由SRS Labs 公司开发并授权使用。 ?DivX ?是DivX 公司的注册商标,拥有许可证。 X 参照-具有相关信息的页面。例如:X 12(表示“见12页”)。→ 下一步-为执行步骤必须选择的选项或功能表的次序。例如:在功能表模式下,点击信息→新建信息(表示信息,下一步新建信息)。[ ] 方括号-手机按键。例如:[](表示 电源开/关/结束键)。

三星手机操作手册

如何判断手机是否是行货 三星你就只能通过这样查询了来判断是国行还是水货。。 *#*#197328640#*#*#* 其实*#197328640# 就出出现Service Mode (服务模式界面) 【1】Debug Screen 调试模式主要用于调试,并提供各种调试数据、手机参数的监看 【2】Version Info 版本信息 【3】UMTS RF NV UMTS射频校准 【4】GSM RF NV GSM射频校准 【5】AUDIO 里面有Voice Call Video Call Multi-Audio Table ....等【6】COMMON 里面有FTM Debug Info RF Scanning ....等 选择 2 2 4 就可以查生产日期 进拨号盘: 输入*#06# 记下IMEI号 继续进拨号盘: 输入*#272*IMEI# IMEI就是你刚才记下的15位IMEI号码。 可以看到Sales Code后面的白框里会有3个字母。这个就是销售国的代码。记下到下表中查对应的国家即可。 比如说我的9000 ,Sales Code是XEU ,在下表中可以查到XEU = UNITED KINGDOM,即代表手机是销往英国的,欧版。 英文不行的话请自行谷歌或有道吧。 网上那个神马通过IMEI查产地的网站不知欺骗了多少人的感情,怒! I9000 查询 一、购机验机 1、仔细看屏幕内有无印痕;数据线,耳机孔,扬声器孔,挂带孔等是否有灰尘。 2、仔细看机身电池卡锁处有无拨痕,上下盖旋轴处有无旋印。 3、仔细检查WAP和语音功能及通话纪录信息功能中有无记录。 4、闻气味,新机器有一种特殊檀香气味,在购买后短期内不会消散,这种味道不同于一般的清洁剂和香水味,也不同于塑料或化学药品气味(PS:认真检查机身,看是否有粘粘的蜡和油,指甲轻微刮动,有的话就是被商家美容了) 。 5、仔细检查SIM卡接触点和机身电池接触点,看是否有磨痕,新机磨砂样的光亮。 6、看外壳的接缝处间隙是否均匀而且很小,有无撬痕,上盖内屏幕下两封点有无挑痕。

智能手机培训心得

智能手机培训心得 也许人生就是一个不断播种与收获的过程。而这次我有幸参加了智能手机培训就是一次很大的收获,经过此次智能手机培训,我想我们每一位学员都受益匪浅。对于我个人而言,这次培训首先让对智能手机有了进一步的了解;其次使我在开展工作服务客户的技术水平上更上了一个层次;然后从中我也找出了许多我在智能手机业务推广等相关方面不足之处,发现了不少问题也改正了不少问题;最后这次培训活动不但让我们更了解智能手机还充实了我们的业余生活,使得我们的业余生活更加丰富多彩。 这次培训单位给我们搭建了一个很好的学习平台,老师讲课条理也相当清楚,环环相扣。引用的案例,生动且一针见血,恰到好处。学员们也听的相当认真,关于这次智能手机培训的内容,联系到我们实际工作中去我也有自己的心得体会。 自从上个世纪末叶,当时手机巨头摩托罗拉推出第一款名为天拓A6188的智能手机后,智能手机行业蓬勃发展,时至今日,智能手机品牌已是百家争鸣,其普及率相当之高,而用户数量还在已惊人的速度增长。智能手机不但具备,普通手机的电话短信功能,还融入了掌上电脑的功能不但可以上网冲浪,更能办公娱乐,例如手机QQ,手机百度,手机微博等等手机应用早已被普及。由此可见,智能手机已经成为我们生活中一个不可缺少的部分,重要性也日益显著。 然而智能手机品牌的多样化,导致其技术的多变,例如手机系统就有苹果公司的ios 系统,谷歌公司的安卓系统,诺基亚的塞班系统等等。所以对一般老板姓而言了解一款智能已经相当费时费力,如果频繁更换手机且使用不同品牌那么就会相当繁琐。而对于我们在开工作时也会遇见一些客户对于手机不了解的求助,例如客户需要下载安装某个应用软件,客户需要了解哪里设置密码,设置网络参数,如果使用彩信等等。且不同的客户可能使各种各样的智能机,不同智能手机的系统不同,操作方式等等都大不相同,所以对于智能手机的了解也是我们日常工作中必不可少的。 为了能更好的开展工作,推广智能手机的相关业务,我们必须要了解市场上比较多见的智能手机的操作。但在实力工作中,我曾遇到有顾客向我求助,她的苹果手机无法接受到手机报。开始我为她检查手机,一切都正常,可以上网,信号也有,唯独不能收到手机报。后来经过研究发现手机报属于彩信,而苹果手机接受彩信必须在其蜂窝数据中设置然后重起手机才可以接收。从这件事中我们不难看出我自身存在的缺点,也体现了对智能手机的了解的重要性。 所以这次智能手机的培训不但普及了我们对智能手机的了解,从另一个角度来说更是提高了我们的业务能力,专业水平。感谢单位可以给我们这么好的一次学习提升机会,让我们发现问题解决问题,在行业中始终保持先进。

三星手机全代码

三星手机新版指令 *#9999# 显示手机软件版本号 *2767*2878# 话机当前设定复位(手机解锁) *2767*927# W AP *2767*3855# 话机EEPROM总复位(修复软件故障) *#8999*228# 电池参数读取 *#8999*289# 振铃信号频率测试 *#8999*246# 程序参数显示 *#8999*364# WATCHDOG信号测试 *#8999*377# EEPROM错误显示 *#8999*427# WATCHDOG信号路径设置 *#8999*523# 液晶显示对比度调整 *#8999*636# 存贮状态显示 *#8999*786# 当前使用日期、时间读取 *#8999*842# 振动测试 *#8999*947# 在重大错误下复位设置 *#8999*9266# 显示收信通道号及收信强度 *#0523# 调LCD对比度 *2767*7377# 解手机密码的复位指令 *2767*927# 三星300 上网设定不重新开机 尤其是*#0523#的输入,有些型号的手机要插卡,有些不用。另外,如出现一次输入成功,而再输入失败的情况,是由于手机软件上的记忆效应,你可以将手机的电池卸下重装上再试输入 三星手机全代码 首先要知道“水改货”现在型号为SGH-T108+(一定要买带加号的,带加号的菜单中多了一项“百宝箱”);不过自己可以用电脑升级到加号的。 按*#9999#查软件版本,SGH-T108+的最新版本为G5,就是屏幕上显示的最后两位。水改货”的标配和“行货”的标配不一样,“水改货”的标配为“主机、双电(一薄电、一厚电)、双充(一旅充、一座充)、耳机、手机绳、光盘、数据线、说明书、包装盒”,缺一不可。在买+的时候不要

智能手机使用手册

智能手机使用手册 使用前准备: 收到手机后,请检查手机屏幕是否有贴屏保膜(我们发的手机一般都是已经贴好一张膜的),一般屏保膜一共有二 层,最上面的一层有一张小小的标签纸,请将上面一层连同小纸条一起揭下来,下面一层才是屏保膜。 目录: 一、设置触屏校准 二、关闭蓝牙,WIFI 三、电池充电时间 四、移动,联通,GPRS上网设置 五、恢复出厂设置 六、图解多普达智能手机软件安装详细方法 七、如何使用卫星GPS导航 八、导航软件及相关软件下载 九、如何设置多普达点X直接关闭程序以防止手机死机(图)(部分旧机型适合) 十、多普达HTC 来电,信息,闹钟等铃声设置 十一、wifi上网设置图文教程(多普达,HTC,WM6.5,WM6.1,T3238,S1,T2222适用) 重点:常见的手机设置教程(图文) (1)、使用前请点开始-入门:里面有几个最常用的手机操作,如更换铃声,蓝牙连接,拔打电话,联 系人等 (2)、如何切换输入法:点住底部输入法的图标不要放,会弹出一个输入法的列表。 (3)、很多用户经常手容易出汗,如果屏幕经常有粘到有汗水或汗迹,或水分时要及时擦干净,屏幕要 保持干净。否则屏幕边框容易受汗水氧化,会造成触屏不灵。 一、设置触屏校准 请用户在收到手机首先进行触屏校准,具体操作步骤如下: 设置方法:点击开始》设置》系统》屏幕》在左下角选择“调整”,点击中间的调整屏幕,你将看到一个“十”用手写笔点击点就行了,如果点击正确“十”会跳到其他三个角,即可完成。 二、关闭蓝牙,WIFI 为了降低电池电量的损耗,请将没有使用的蓝牙及WIFI功能关闭,有需要的时候才打开,用完之后再关闭,因为蓝牙 和WIFI均是非常耗电的功能。 设置方法:点击开始》设置》连接》通讯管理》可将WIFI,蓝牙,飞行模式关闭,注:电话功能不可以关闭,否则无 法接听电话。 三、电池充电时间 如果你的是新手机,前三次充电时间尽量不低于12个小时,这样可以完全激活电池容量,以后可以适当减少,如果手 机显示充电已满,表示电池已经标准充满,但不是完全充满,一般在手机显示电池已经充满状态需要继续充2-3个小时 左右才能完全充满。 电池不要用到没电自动关机的时候才去充电,而是在7%左右的电量的时候(也就是手机提示电量不足的时候就要 充电了,否则用到电池没电的时候会充不进电的,要重新将电池用普通的带夹子的那种万能充,充十几个小时重新激活)

老年大学智能手机初级教程

智能手机课初级教程

于东洋 目录 一.智能手机分类与基本操作 1.1 智能手机分类 1.2 智能手机基本操作 1.2.1 智能手机开关机操作 1.2.2 智能手机接听电话 1.2.3 智能手机拨打电话 1.2.4 智能手机添加、删除联系人 1.2.5 智能手机设置闹钟 1.2.6 智能手机连接无线网 1.2.7 智能手机拍照、录像二.收发短信 2.1 查看手机短信 2.2 发送手机短信

三.软件下载与使用 四.歌曲、视频下载与播放 五.QQ下载与应用 5.1 QQ的下载 5.2 QQ的应用 5.2.1 QQ账号的申请 5.2.2 QQ添加好友 5.2.3 如何与好友聊天 5.2.4 如何更换QQ头像和昵称 六.微信下载及应用 6.1 微信的下载 6.2 微信的应用 6.2.1 如何登陆微信 6.2.2 如何添加好友 6.2.3 怎么与好友聊天 6.2.4 怎么与好友语音和视频聊天

6.2.5 怎么给好友发红包 6.2.6 如何查看和发送朋友圈 6.2.7 如何删除微信好友 一.智能手机分类与基本操作 1.1 智能手机分类 智能手机按系统分类可分为IOS(苹果)和Android(安卓)。运行IOS系统的手机有iPhone(苹果手机),运行

Android系统的手机有三星、小米、魅族、华为、OPPO等。 1.2 智能手机基本操作 现在,许多家庭为了丰富老年的生活,同时也为了方便与家人沟通,孩子们都给老年人添置新智能手机,许多叔叔阿姨由于不会使用,例如做为手机的基本功能,接打电话是老年人最常用的功能,但与很多叔叔阿姨使用习惯了带有按键的功能机,拿到智能手机害怕不会接电话,导致智能手机被闲置或不敢给新手机装上手机卡。下面就为叔叔阿姨们介绍手机的一些基本操作,以方便老年人更好的利用智能手机与家人或朋友沟通。 1.2.1 智能手机开关机操作 智能手机的开关机操作具有通用性,一般操作为: 开机:在关机状态下,长按电源键(一般在手机右侧或上侧)。关机:在开机状态下,长按电源键(个别手机在长按电源键后可能会出现“是否关机”提示,点击“关机”或者“确定”即可)。

三星手机NOTE3使用技巧(改版)140208

三星NOTE3手机使用进阶技巧 头几天买了一台三星NOTE3,9008型手机,裸机价格4850元,加了1个套400元、1块电池400元,又把内存从16G扩充到32G,又去了400元。一个手机花进去我5850大洋,这是我一生中最奢侈的个人消费品了,如果不是老婆鼓励,我说什么也舍不得丢掉近6000买一个手机。 其实满希望有一个功能强的移动式个人终端的,我属于对资讯和个人事务管理需求强的人。但绝对不是普通的在公交车上随处可见的那种“手机控”,沉迷于游戏、聊天、音视频的那种人。有一个好的智能手机也是我个人工作和生活管理的需要,这款手机应该满足了我的需求。 总体智能手机无非集中了如下六大功能: (1)通讯:电话、短信。 (2)交流:QQ、微信、飞信、连我等社交软件带来的远程交流环境。 (3)资讯:网络功能带来的海量云端资讯,如股票、新闻、百科、论坛、电子书等。 (4)娱乐:音频、视频、图片、游戏等。 (5)个人管理:闹钟、记事本、记帐、电子支付、邮箱、云盘等,可以管理个人事务。 (6)工具箱:手电、照相机、计步器、指南针、导航仪等,这些小东西经常能帮上我们的大忙。 可惜的是,现在的手机好多都不带详尽的说明书,摸索了几天,总算掌握了个大概。这里且跳过那些最基本的开关机、打电话、发信息、拍照什么的是手机就有的功能,记录一些有特点的难于掌握的使用方法。 一、设定 三星NOTE3是我见过的设置最复杂的手机。 有两个通道可以进入设定: (一)系统设定 点“设定”按钮,就是那个齿轮图标。这里有所有可设置项目的设置,包括连接、设备、控制、一般四大类,内容比较多,可以自己一项项去琢磨,对手机比较熟悉的人,应该不难做到。 要特别关注连接(通讯)设置,控制好你的流量和手中的钱。 连接设置大致包括移动数据(要付话费,来自移动商)、WLAN(就是WIFI,只要你附近有,是无须费用的)、GPS(卫星通讯信号)、蓝牙等的设置。 还有一个就是“开发者选项”,是一般人不知道的。 这些比较生僻而且需要的设置,在后面有介绍。其它设置都是基本的,自己多半可以鼓捣明白,不罗嗦了。 熟悉设置,是良好掌控手机必须的。 (二)设置条 在桌面下,下拉屏幕顶部:

安卓系统智能手机的基本使用方法

目录 一.初识3G手机 1.外型及按键和插孔 2. 三大操作键 3. 开机、关机和解锁 4. 手机的触摸屏操作方式二.认识手机的桌面 1.任务管理器 2.本手机的5大主菜单三.如何输入文本 1. 什么是文本框 2.用手写法输入汉字 3.用键盘法输入汉字 4.用键盘法输入数码和符号 四. 如何呼出和接收电话 1.呼出和中断电话的方法 2.快速拨号的设置方法 3.交替通话及其设置方法 4. 接收和拒绝接收电话的方法 5 . 转移外来电话的方法 6.添加和删除联系人的方法 7. 设置呼叫限制的方法 8. 电话黑名单的设置方法

9. 拨打国际长途电话的方法 五.如何发出和接收短信息 1.发短信的方法 2. 收看短信的方法 3. 回复短信的方法 4. 转发短信的方法 5.删除短信的方法 6.把全部短信导入电脑的方法 7. 短信黑名单的设置方法 六.上网设置和上网方法 1.GPRS上网前手机参数的设置方法 2.添加网址的方法 3.用手机收发电子邮件的方法 4.微信的设置方法 七.手机跟电脑的连接方法 1. 对手机的设置方法 2.把手机短信导入电脑的方法 3. 把手机上的照片复制到电脑的方法八.其他有关应用和设置 1.查看日历和设定日期、时间 2.查看世界时、设定闹钟和电子秒表 3.照相机和摄像机的使用方法

4.录音机和收音机的使用方法 附录:海信HS-T830手机的全部图标 目前,3G智能手机的操作系统有十多个,如诺基亚公司的Symbian(塞班);苹果公司的iOS;微软公司的windows mobile;谷歌公司的Android(安卓)等。生产厂家更多。在我国生产的智能手机中,采用安卓系统的居多,据说占60%。如此多的操作系统,如此多的生产厂家,每个品牌的手机都有自己的操作方法和使用方法。笼统介绍3G手机的使用方法,谈何容易。但是,作者认为:这些手机也有一些共同的特点,比如触摸屏、图标菜单等。当熟悉过一种3G手机的操作方法后,对其他品牌手机,经过短时适应,也会融会贯通的。本文就是试图通过对大众化的海信HS-T830手机使用方法的详细介绍,以便达到这一目的。 海信手机操作系统是安卓系统,但是,它的说明书十分简单,初学者要想通过看说明书学会操作是很困难的。因此,作者参考了网友在网上介绍的经验,通过亲身使用实践,对这种手机的基本使用方法有以下体会,现在用自己的话把它写出来,谨供初学者参考。 一.初识3G手机 1.外型及按键和插孔 这种手机的外型如图1所示。在关机状态时所能看到的按键、插孔等都在图1中作了标志。 主屏相当电脑的桌面,当开机后在桌面上显示的是常用程序的图标。可以用手滑动的方法改换主屏显示的内容。

智能手表手机说明书

1

目录 产品说明 产品组成-------------------------------------------------5 外观及按键----------------------------------------------6 产品特征-------------------------------------------------9 使用前的准备 电池充电--------------------------------------------10 2

安装SIM卡-----------------------------------------11 开通移动网络服务--------------------------------12 开通平台服务-----------------------------------13 使用说明 时间显示------------------------------------------------ 15 电话------------------------------------------------------16 脉搏测量-------------------------------------------------17 计步管理-------------------------------------------------18 GPS定位--------------------------------------------------19 设置------------------------------------------------- ------20 跌倒报警------------------------------------------------ 21 3

以三星手机为例,电脑使用手机流量上网使用说明

以三星手机为例电脑使用手机流量上网使用说明 一、设置电脑拨号连接 1、安装手机驱动 用USB数据线将手与电脑连接,安装附件三星kies软件,注意选择“统一安装驱动” 2、安装天翼宽带 用USB数据线将手机与电脑连接,将手机下滑设置栏里将流量数据上网功能开启,“数据开启”选择NET,电脑识别后,在手机下拉通知栏,显示“天翼宽带,选择拨号网络通过天翼宽带”,打开,点击“确定”。 电脑识别手机后,打开“我的电脑”,双击“eSurfing”,安 装“天翼宽带”,安装完毕后,重启电脑,显示天翼宽带正在装载, 安装后桌面显示。 3、以XP系统为例,设置拨号连接 点击电脑“开始”选择“设置”---“网络连接” 进入后,选择“新建连接向导”,“下一步”----“连接到Internet”---“手动设置我的连接”----“用拨号调制解调器连接”,选择“调制解调器-SAMSUNG 1Xevd0 USB Modem Phone”---输入“SIP名称”如“应急上网”-----输入电话号码“#777”---输入用户名如“card”,输入密码,确定即可建立新的拨号连接,将此新

建连接创建桌面快捷方式 4、以win7系统为例,设置拨号连接 在“控制面板”选择“网络和共享中心”,选择“设置新的连接或网络”---“连接到Internet”----“创建新连接”---选择“拨号”,“拨打电话号码”填写:#777,用户名自定义,本次以“card”为例,填写密码,设置拨号规则,填写区号0537,确定即可建立新的拨号连接,将此新建连接创建桌面快捷方式 注意:将以上设置应在电脑提前设置好,以便应急时立即可以使用 二、当电脑网络断线,使用手机流量上网操作方法 1、点击手机“设置”---“应用程序”---“开发”---将“USB调试”功能关闭,即将 后面的绿色√关闭, 2、用USB数据线将手机与电脑连接,将手机下滑设置栏里将流量数据上网功能开启,“数据开启”选择NET,电脑识别后,在手机下拉通知栏,显示“天翼宽带,选择拨号网络通过天翼宽带”,打开,点击“确定”

智能手机使用方法详解

智能手机使用方法详解 第三方字体如何才能安装到手机? 字体一般是以压缩分卷形式上传的文件,需要先在电脑上用Winrar解压,解压后如果生成的是SIS格式的,在文件管理里找到后打开安装,安装好以后重新启动手机即可。 如果是复制版本的。用手机里安装的第三方文件管理软件(比如SeleQ等)将解压后生成的字体文件,分别复制到手机C和E盘里相应的FONTS文件夹(没有此文件夹可以自建),安装好以后重新启动手机即可。 为什么手机里存储的电话号码,来电话时却不能显示人名? 电话号码必须存在手机里,存在SIM卡里的话,手机是不能识别的。另外,存储的电话号码人名不能重复,外地座机电话需要加上区号。还有就是某些集团内部的号码,手机也是不能正常识别的。 如何在手机通话时显示通话时间? 设置显示通话时间的方法:通讯记录--选项--设置--显示通话时间,选择是。 如何把SIM卡里的电话簿存到手机里? 进入手机里的名片夹--选项--SIM卡电话簿,然后选项--标记--全部标记--复制至名片夹,这样就可以把SIM卡里的

名片复制到手机名片夹里面了。也可以在选择名片时,按住笔形键,上下移动摇杆选择选定要复制的名片,然后再复制到手机名片夹里。 (注意:SIM卡里的电话簿最好不要删除,在手机需要格机时可以作为名片夹备份) 手机里的单键拨号如何使用? 单键拨号需要在:设置--通话设置--单键拨号--设置为开,并在在2-9对应的数字上设置好自己常用的电话号码,在待机时长按所要拨的数字键就可以实现单键拨号了。(注意: 数字1键默认的是语音信箱) 如何设置手机的来电铃声和短信提示音? 在手机的情景模式里就可以找到,具体设置方法为:情景模式--个性化选择--来电铃声/信息提示音。 如何把下载的铃声设置成来电铃声和短信提示音? 需要将下载的铃声(手机支持的铃声格式)放在sounds (即声音片段)文件夹下的simple或者digital里面,然后 再在情景模式里找到选定即可。 发短信输入时怎么不能输入要选择的单个英文字母? 需要把手机里的预想输入关闭。具体设置方法为:设置--手机设置--常规--预想输入,选择关。 接收到的信息如何能编辑,然后再发给别人? 选择要编辑的信息,然后打开选项,选择转发,然后就

相关文档
最新文档