大工《大学英语》模拟试卷a

大工《大学英语》模拟试卷a
大工《大学英语》模拟试卷a

2009年3月份《大学英语3》课程考试模拟题一考试形式:闭卷试卷类型:(A)

Part I Vocabulary & Structure(本大题共25小题,每小题1分,共25分)

Section A

Directions: Choose the ONE that is closest in meaning to the underlined part in the sentence.

1. He claimed that he could create live fish out of chemicals. A

A.asserted B.demanded C.argued D.announced

2. The best students are awarded special scholarship. B

A.rewarded B.given C.compensated D.refused

3. She said to her newly-married husband, “If you want to go to the front, I’ll not stand in your way.”D

A.go with you B.stay behind C.go my own way D.not prevent you from going

4. Jack came to the party with a young woman, whom I assumed to be his girl friend. B

A.pretended B.supposed C.resumed D.granted

5. He passed me by as though he had never in his life seen me before. C

A.went past me B.avoided me C.ignored me D.went away from me

6. That way of speaking is peculiar to people in this part of the country. C

A.strange to B.odd to C.characteristic of D.particular about

7. Our time is running out and I think we ought to say something about the ending of the novel. B

A.We have enough time B.We have almost used up our time

C.We haven’t enough time D.Our time is limited

8. The search was called off when the fog got thicker. B

A.started B.canceled C.postponed D.continued

9. Mrs. Jones identified the suspect by the scar on his face. A

A.recognized B.found out C.discovered D.coincided

10. If you associate with such people, I’m afraid you are heading for serious trouble. B

A.are making B.are going to have C.are avoiding D.are creating

11. The young girl took the cheese and commenced to eat. A

A.started B.commended C.renounced D.commented

12. Smoking is prohibited in the office. D

A.no good B.discouraged C.encouraged D.not allowed

13. The judge suspected the truth of the evidence provided by the witness. A

A.doubted B.believed C.guessed D.realized

14. They occasionally stop by to see us. D

A.often B.seldom C.usually D.once in a while

15. We waited more than half an hour for Beth but eventually we had to leave without her. B

A.at last B.in the end C.afterwards D.reluctantly

Section B

Directions: Identify the one that needs correction.

1.Jack has set his mind to go to college next year even though he hasn’t saved up enough money to pay his B

A B C D

tuition.

2. Never before he had felt himself so powerfully attracted to the scientific ideal. B

A B C D

3. Leading scientists are often the kinds of person who have enjoyed intellectual challenges all their lives. B

A B C D

4. With the price of oil goes up, the economy of oil-producing countries is expanding at a high a rate. A

A B C D

5. He wasn’t keen on buy a used car, but we talked him into it. B

A B C D

6. As people approach to old age, their energy may diminish. B

A B C D

7. In order to attain our objective, it is essential that we will make the best use of the limited resources available.C

A B C D

8. If you take a ten- or fifteen-minutes vacation into the realm of imagination each day, you may add much to the A

A B C D

excitement and enjoyment of your life.

9. The doctor said that although the child had a very bad case of influenza, but there would be no danger if he B

A B C

avoided pneumonia.

D

10. Let’s not waste time on matters of no important. We have other vital problems to deal with.B

A B C D

Part II Reading Comprehension (本大题共20小题,每小题2分,共40分)

Directions: Read the following passages carefully and choose the best answer from the four choices marked A, B, C and D. Passage 1

Is breakfast the most important meal of the day My generation certainly grew up hearing and believing in this statement, which doesn’t stop most of us from rushing out in the morning with only a cup of coffee and a piece of toast. However, in an estimated 40 percent of American families there isn’t even an adult present in the kitchen to urge children to finish their breakfast. So, more children avoid breakfast than any other meal.

While no one has proven that breakfast is the most important meal of the da y, it’s at least of equal importance with lunch and dinner. Experts warn that your body burns the energy from food within four hours. Although you may use up less energy while you sleep, it’s a long time until morning and you still wake up with the need fo r lots more fuel.

Some studies have shown that children who avoid breakfast don’t do as well in school. Besides lack of energy, we all know how tough it is to focus when your stomach’s making noises and you're counting hours until lunch.

In addition, a recent Canadian study suggests that avoiding breakfast may increase the chance of a heart attack. It's been known that the incidence of heart attacks is highest in the first few hours after waking.

So, there’s no doubt the importance of breakfast is more than just an old wives’ tale. The problem comes in following the advice. How do you find time to make a proper meal and then make time to eat it

The American Health Association recommends that breakfast should supply at least one-fourth of the daily food needs. And it’s important to include a variety of foods to supply energy until the next meal. Foods like bread can be digested (消化) in as little as 30 minutes; however, foods like eggs, milk, meat, and cheese last longer, and can help you make it to lunchtime.

1. Today the saying “Breakfast is the most important meal of the day” is ___ A __.

A. paid less attention to

B. totally out of date

C. no longer a truth

D. of no value

2. According to the passage breakfast is ____C_______ lunch and dinner.

A. better than

B. less important than

C. as important as

D. more important than

3. The passage mentions that not having breakfast can cause children to have trouble ___B___.

A. listening

B. focusing

C. exercising

D. waiting

4. People who do not have breakfast may be more likely to ___D___.

A. get more work done

B. have frequent headaches

C. lose too much weight

D. suffer from heart disease

5. Having various foods for breakfast ____B____.

A. means you can eat less for lunch

B. can supply you with energy until lunch

C. may make you successful in the day

D. will give you warmth the whole day

Passage 2

A person may have an idea about himself that will prevent him from doing good work.

He may have the idea that he is not capable of it. It is easy to get such an idea even though there is not a good reason for it.

A child may think he is stupid because he does not understand how to make the most of his mental skills, or he may accept another person’s mistaken estimate of his ability.

A person who believes that he is incapable will not make a real effort, because he feels that it would be useless. He is therefore likely to fail, and the failure will add to his belief about his incompetence.

Alfred Adler, a famous psychiatrist, had an experience which illustrates this. When he was a small boy he got off to a poor start in arithmetic. His teacher got the idea that he had no ability in arithmetic, and told his parents what she thought. In this way, they too developed the idea. He accepted their mistaken estimate of his ability, felt that it was useless to try, and was very poor at arithmetic, just as they expected.

One day he became very angry at the teacher and the other students because they laughed when he said he saw how to do a problem which none of the other students had been able to solve.

When Adler succeeded in solving the problem, he rejected the idea that he couldn’t do arithmetic and was determined to show them that he could. His anger and his new found confidence stimulated him to go at arithmetic problems with a new spirit. He now worked with interest, determination, and purpose, and he soon became very good at arithmetic.

This experience made him realize that many people have more ability than they think they have, and that lack of success is as often the result of lack of knowledge of how to apply one’s ability, lack of confidence, and lack of determination as it i s the result of lack of ability.

1. What’s the main idea of the passage A

A. A wrong self-image may prevent one from reaching his full potential.

B. It's easy for a person to believe in his own incompetence.

C. Never take to heart what others think of you.

D. Lack of success is often the result of lack of ability.

2. Why a person’s mistaken notion often results in failure C

A. He believes he’ll succeed one day.

B. He feels that he’s not good enough.

C. He believes he’ll fail anyway.

D. He doesn’t ne ed to make any effort.

3. What’s the function of Alfred Adler’s example in the whole passage B

A. Alfred Adler’s experience illustrates his poor start in math.

B. Alfred Adler’s story exemplifies the author’s conclusion.

C. Alfred Adler’s e xample shows his real ability in arithmetic.

D. Alfred Adler’s example teaches us the value of self-confidence.

4. According to the author, what’s the reason of a child for thinking he is stupid D

A. There’s not a good reason for this kind of thinking.

B. Because the people around him tell him it.

C. Because he never thinks that he can also be smart.

D. Because he does not know how to make full use of his mental powers.

5. According to the author, many people’s mental pictures about themselves are ______C____.

A. correct

B. in focus

C. out of focus

D. accurate

Passage 3

There were days in which Danny could forget that he had graduated from Boston University. After 17 years of education in the finest schools in America, he couldn’t repair a burnt connection in his car or locate a carburetor (化油器).

Danny is an educated man. He is a master of writing papers, taking tests, talking, and filling out forms. He can discuss Freud from a Marxian viewpoint and he can discuss Marx from a Freudian viewpoint.

In short, Danny is a worker without skills, and he has a sociology degree to prove it. He is of very little use to American industry.

This is nothing new. Colleges have been turning out workers of this sort for decades. Until five years ago, most of these workers took their degrees in sociology, philosophy, political science, or history, and marched right into the American middle class. Some found work in business and government but many, if not most, went into education, which is the only thing they knew anything about. Once there, they taught another generation the skills necessary to take tests and write papers.

But the cycle broke down. There are too many teachers these days, college applications are down, plumbers are making $12 an hour, and graduates with degrees in fields like sociology are faced with a choice: graduate school or drive a taxi.

Danny chose the taxi because driving was about the only skill he had that he could make money with. Danny refers to his job as “Real World 101”. He has been beaten and shot at. But he has also acquired some practical skills: he can get his ticke ts fixed; he knows how to cheat the company out of a few extra dollars a week; he found his carburetor, and he can fix it.

1. What did Danny’s schooling teach him C

A. How to repair cars.

B. How to make choices. How to write papers. D. How to teach classes.

2. Five years ago, a college degree ensured _______C_______.

A. a position doing graduate studies

B. a skilled job for college graduates

C. a place in the American middle class

D. a set of skills that was very useful

3. What is causing the system of college study to break down C

A. There are better jobs to be had.

B. There are not enough students.

C. There are too many teachers.

D. There are few good jobs for us.

4. Why did Danny choose to drive a taxi after he graduated from college D

A. He wanted to get more true experience in society.

B. He wanted to learn the new skill of repairing cars.

C. Taxi drivers can earn more than middle class people.

D. He had no other skill to support himself but driving.

5. Though his job is difficult and dangerous, Danny ____B__.

A. has begun to enjoy his new job

B. has learned skills that are useful

C. has finally forgotten his old life

D. has learned more than in college

Passage 4

Have you ever felt your mind getting confused after a sleepless night and you couldn’t come up with an original thought no matter how hard you tried

You were probably right if you thought that was caused by a lack of sleep. Dr. Home, a sleep researcher in England, studied 24 college students. One group got their normal eight hours of sleep. The other group didn't get any sleep at all—they stayed awake all night. The next day, Dr. Home tested the students. He asked them questions that required creative and original thinking. One of the question s was “How many uses can a box be put to”

The results The wide-awake students did well on the tests. The tired students did poorly.

Research has already shown that tired people can do okay on tests of routine thinking, like simple addition. But Dr. Home tested creative thinking only.

As part of his study, he offered an amount of money as a reward to the tired students if they did well. But even this encouragement wasn’t enough to help the students overcome their tiredness. They still did poorly. Dr. Home be lieves that the part of the brain where thinking takes place may get worn out during waking hours. Sleep may help to repair the brain overnight. Without any sleep, he emphasizes, “even if you think harder, you cannot do better.”

This study gives people something to think about, especially people like hospital workers and airplane pilots, who must stay awake all night and then make emergency decisions.

1. According to the passage, failure to think of new ideas may be ____ A ____.

A. caused by a lack of sleep

B. caused by hard questions

C. caused by a weak brain

D. caused by too much study

2. Tired people have no problem with ______C______.

A. finding uses for boxes

B. making creative ideas

C. doing simple math tests

D. taking research tests

3. The purpose for offering money to the tired students was to ___ D__.

A. help them repair their brains

B. stimulate their interests

C. convince people to join

D. encourage them to do better

4. Sleep might help people by _____ A_____.

A. repairing the brain

B. giving creative dreams

C. providing fresh energy

D. allowing harder thought

5. This information is useful to people like nurses and pilots because ____ D____.

A. they often meet situations in which they must be creative

B. they often take tests to display their abilities to do their jobs

C. they often go to the hospital because of brain problems

D. they often get little sleep but make important decisions

Part III Cloze(本大题共20小题,每小题1分,共20分)

Directions: In this section there is a passage with 20 blanks.For each blank there are three choices marked A, B, and C on the right side of the paper. You should choose the ONE that best fits into the passage.

1-5 BACBD 6-10 CACBC 11-15 BDCDB 16-20 CADBA

Learning is natural. It begins the 1 we are born. Our 2 teachers are our families. At home we learn to talk and to dress and feed ourselves. We learn these and other skills by 3 .

Then we go to school. A teacher tells us what to learn and how to learn. Many teachers teach us, and we pass many exams. Then people say we are 4 .

Are we really educated Let’s think about the real meaning of 5 . Knowing facts does not 6 being able to solve problems. Solving problems 7 creativity, not just a good 8 . Some people who don’t know many 9 are good at solving problems.

Henry Ford is a good 10 . He left school at the age of 15. Later when his company could not build cars 11 enough, he solved the problem. He 12 of the assembly line. Today the answer seems 13 . Yet think of many university graduates who never solved that problem.

What does a good teacher do Does he give students facts to 14 Well, yes, we must sometimes remember facts. But a good teacher 15 how to find answers. He brings us to the 66 of knowledge, so we can drink for ourselves. When we are 17 , we know where to go.

True learning combines intake with output. We take information 18 our brains. Then we use it. Think of a 19 : it stores a lot of information, but it can’t think. It only 20 commands. A person who only remembers facts hasn’t really learned. Learning takes place only when a person can use what he knows.

1. A. baby B. minute C. hour D. day B

2. A. first B. good C. normal D. helpful A

3. A. asking B. listening C. following D. drilling C

4. A. controlled B. educated C. suffered D. passed B

5. A. taking B. growing C. answering D. learning D

6. A. suggest B. say C. mean D. show C

7. A. requires B. is C. brings D. gets A

8. A. word B. thing C. memory D. condition C

9. A. people B. facts C. techniques D. ways B

10. A. learner B. teacher C. example D. driver C

11. A. well B. fast C. beautiful D. cheap B

12. A. managed B. heard C. talked D. thought D

13. A. ordinary B. good C. simple D. special C

14. A. grasp B. understand C. master D. remember D

15. A. knows B. shows C. gives D. encourages B

16. A. plenty B. pile C. stream D. much C

17. A. thirsty B. hungry C. cold D. sleepy A

18. A. of B. for C. about D. into D

19. A. radio B. computer C. record D. machine B

20. A. obeys B. changes C. sends D. writes A

Part IV Writing(本大题共1题,共15分)

Directions: Write a composition entitled Why I Chose to Attend College. The following points may serve as a framework.

1.Introduction: your decision to go to college

2.Body: main reasons for choosing to go to college

a.burning thirst for more knowledge and keen interest in learning

b.opportunities a college education may provide for all-round development

c. a necessary step to a good career

3.Conclusion

Please write ne less than 100 words.

The End!

Why I Chose to Attend College

I asked myself again and again the question of whether I should go to college. I did have some doubts. After careful consideration, however, I finally decided it was worthwhile to attend college.

I decided to go to college mainly because I was always hungry for knowledge. I became more and more interested in math, physics and chemistry. I longed to explore further into theses areas.

I chose to go to college also because I knew a college education would provide me with opportunities for all-round development. I could take part in sports and join campus organizations, which could help make me a well-rounded person.

I chose to go to college partly because I was aware that in today’s world many professions require years of specialized training. People without a college education will find it difficult to obtain a desirable position.

After I went to college, I found my decision was a wise one.

大连理工大学计算机网络实验报告

大连理工大学本科实验报告 课程名称:计算机网络实验 学院(系):电信学部 专业:自动化 班级: 学号: 学生姓名: 2014年11月23日

大连理工大学实验预习报告 学院(系):专业:班级: 姓名:学号:组:___ 实验时间:实验室:实验台: 指导教师签字:成绩: 实验一:网络硬件环境准备实验 一、实验目的和要求 准备计算机网络实验所用到的计算机、网络设备和工具。 二、实验设备 1.网络传输介质在网络中,信息是通过传输介质来传送的,常用的网络传输 介质有三种: ①金属导体,用电流变化传输信息。如同轴电缆、双绞线等。 ②光纤,用光波传输信息。如透明玻璃为介质。 ③不需要物理连接,用电磁波的辐射传输信息。如无线电、微波、卫星等。 本实验采用超5类非屏蔽双绞线(UTP)做网络传输介质进行网络连接,最高数据传输速率是100Mbps。双绞线具有抗干扰性能好、布线方便、价格低、全双工的特点。适用于较短距离的电话系统和局域网系统。 2.网卡 网络接口卡(NIC)也被称为网络适配器,是一种连接设备。它能够使工作站、服务器、打印机或其他节点通过网络传输介质接收并发送数据。 首先要给PC机装上网卡,打开机箱,把网卡插在白色的PCI插槽里;然后开机,装上驱动程序;网络传输介质的连接器(如双绞线的RJ-45连接器)插入网卡的连接器接口。 三、实验内容 制作实验用的双绞线制作两端使用EIA/TIA568B同一标准的正线。

大连理工大学实验报告 学院(系):专业:班级: 姓名:学号:组:___ 实验时间:实验室:实验台: 指导教师签字:成绩: 实验一:网络硬件环境准备实验 一、实验目的和要求 见预习报告 二、实验原理和内容 见预习报告 三、主要仪器设备 双绞线,网线头,电缆测试仪子母机,钳子。 四、实验步骤与操作方法 1.制作实验用的双绞线;制作两端使用EIA/TIA568B同一标准的正线。 2.按照线色排好理直、剪齐,能清楚的看到8个线头整齐的顶到最前位置,套 管推过止口位置;然后压紧。 3.逐根线检测 五、实验结果与分析 根据电缆测试仪子母机显示情况,制作一根八根线全部正常的网线 六、讨论、建议、质疑

大学物理实验报告及答案

(此文档为word格式,下载后您可任意编辑修改!) 大学物理实验报告答案大全(实验数据及思考题答案全包括) 伏安法测电阻 实验目的(1) 利用伏安法测电阻。 (2) 验证欧姆定律。 (3) 学会间接测量量不确定度的计算;进一步掌握有效数字的概念。 U 实验方法原理根据欧姆定律,R =,如测得U 和I 则可计算出R。值得注意的是,本实验待测电阻有两只, I 一个阻值相对较大,一个较小,因此测量时必须采用安培表内接和外接两个方式,以减小测量误差。 实验装置待测电阻两只,0~5mA 电流表1 只,0-5V 电压表1 只,0~50mA 电流表1 只,0~10V 电压表一只,滑线变阻器1 只,DF1730SB3A 稳压源1 台。 实验步骤本实验为简单设计性实验,实验线路、数据记录表格和具体实验步骤应由学生自行设计。必要时,可提示学生参照第2 章中的第2.4 一节的有关内容。分压电路是必须要使用的,并作具体提示。 (1) 根据相应的电路图对电阻进行测量,记录U 值和I 值。对每一个电阻测量3 次。 (2) 计算各次测量结果。如多次测量值相差不大,可取其平均值作为测量结果。 (3) 如果同一电阻多次测量结果相差很大,应分析原因并重新测量。 数据处理 (1) 由?U =U max ×1.5% ,得到?U 1 = 0.15V,?U2 = 0.075V ; (2) 由?I = I max ×1.5% ,得到?I 1 = 0.075mA,?I 2 = 0.75mA; (3) 再由u= R ( ?U )2 + ( ?I ) 2 ,求得u= 9 ×101?, u= 1?; R 3V 3I R1 R2 (4) 结果表示R1 = (2.92 ± 0.09) ×10光栅衍射实验目的 (1) 了解分光计的原理和构造。 (2) 学会分光计的调节和使用方法。?, R 2 = (44 ±1)? (3) 观测汞灯在可见光范围内几条光谱线的波长实验方法原理

大学英语试卷

题目部分,(卷面共有3题,21.0分,各大题标有题量和总分) 一、Fill in the Blanks with the Right Word(实词填空)(1小题,共1.0分) 1.(0.5分) These charges and interest rates are va_______ and the Bank reserves the right to change them from time to time. 二、Reading Comprehension 阅读理解(2小题,共20.0分) 1.(10分)Questions 1 to 5 are based on the following passage. In the United States a university professor is given a few months of freedom from his duties about every seventh year for travel or advanced study. This period of freedom from teaching is called a “study or research leave”. Its purpose is to give the professor experiences which will make him a wiser person and a better teacher when he returns to his university. Few study leaves are interesting enough to be described in national newspapers and magazines. Recently, however, there was an exception. The public learned how Dr. John R. Coleman, president of Haverford College, had spent his study leave. At the age of 51, Dr. Coleman was determined to escape from university life for a few months and to get a variety of experiences in the world of work. He especially wanted to learn about people. People who do hard physical labor were especially interesting to him. “I wanted to get away from the world of words and political matters and parties – the things a president does,” Dr. Coleman later explained to news writers. “As a college president you begin to take yourself very seriously and to think you have power you don't. You forget things about people. I wanted to relearn things I’d forgotten.” Telling no on e of his plans, Dr. Coleman started his study leave on a farm in Canada, hundreds of miles from his college. Getting up at 4:30 each morning, working thirteen hours a day in fields, he prepared himself physically for his next job, digging ditches in Atlanta, GeorgiA、 After that, the college president washed dishes ina Boston restaurant. During the last ten days of his leave, he worked as a garbage collector. 1. The first paragraph is mainly about _______________. A、why a professor should be free from his duties every seventh year B、how professors spend their study leave C、what a study leave is and its purpose D、how a study leave makes a professor a wiser person and a better teacher 2. A study leave is a period of freedom from duties allowed to a university teacher who has taught ________ since his last leave. A、for six years B、for seven years C、for a term D、for a university year 3. People learned about Dr. Coleman's unusual experiences from ________. A、his colleagues B、the boss of a Boston restaurant C、the Canadian newspapers and magazines D、the U.S. newspapers and magazines 4. Dr. Coleman carried out his study leave in an unusual way because ________. A、he hates his university life, especially his job as a president B、he wanted to learn about people, especially people who do hard physical labor

大学物理实验报告书(共6篇)

篇一:大学物理实验报告1 图片已关闭显示,点此查看 学生实验报告 学院:软件与通信工程学院课程名称:大学物理实验专业班级:通信工程111班姓名:陈益迪学号:0113489 学生实验报告 图片已关闭显示,点此查看 一、实验综述 1、实验目的及要求 1.了解游标卡尺、螺旋测微器的构造,掌握它们的原理,正确读数和使用方法。 2.学会直接测量、间接测量的不确定度的计算与数据处理。 3.学会物理天平的使用。 4.掌握测定固体密度的方法。 2 、实验仪器、设备或软件 1 50分度游标卡尺准确度=0.02mm 最大误差限△仪=±0.02mm 2 螺旋测微器准确度=0.01mm 最大误差△仪=±0.005mm 修正值=0.018mm 3 物理天平 tw-0.5 t天平感度0.02g 最大称量 500g △仪=±0.02g 估读到 0.01g 二、实验过程(实验步骤、记录、数据、分析) 1、实验内容与步骤 1、用游标卡尺测量圆环体的内外径直径和高各6次; 2、用螺旋测微器测钢线的直径7次; 3、用液体静力称衡法测石蜡的密度; 2、实验数据记录表 (1)测圆环体体积 图片已关闭显示,点此查看 (2)测钢丝直径 仪器名称:螺旋测微器(千分尺)准确度=0.01mm估读到0.001mm 图片已关闭显示,点此查看 图片已关闭显示,点此查看 测石蜡的密度 仪器名称:物理天平tw—0.5天平感量: 0.02 g 最大称量500 g 3、数据处理、分析 (1)、计算圆环体的体积 1直接量外径d的a类不确定度sd ,sd=○ sd=0.0161mm=0.02mm 2直接量外径d的b类不确定度u○ d. ud,= ud=0.0155mm=0.02mm 3直接量外径d的合成不确定度σσ○ σd=0.0223mm=0.2mm 4直接量外径d科学测量结果○ d=(21.19±0.02)mm d = 5直接量内径d的a类不确定度s○

大学物理实验报告优秀模板

大学物理实验报告优秀模板 大学物理实验报告模板 实验报告 一.预习报告 1.简要原理 2.注意事项 二.实验目的 三.实验器材 四.实验原理 五.实验内容、步骤 六.实验数据记录与处理 七.实验结果分析以及实验心得 八.原始数据记录栏(最后一页) 把实验的目的、方法、过程、结果等记录下来,经过整理,写成的书面汇报,就叫实验报告。 实验报告的种类因科学实验的对象而异。如化学实验的报告叫化学实验报告,物理实验的报告就叫物理实验报告。随着科学事业的日益发展,实验的种类、项目等日见繁多,但其格式大同小异,比较固定。实验报告必须在科学实验的基础上进行。它主要的用途在于帮助实验者不断地积累研究资料,总结研究成果。 实验报告的书写是一项重要的基本技能训练。它不仅是对每次实验的总结,更重要的是它可以初步地培养和训练学生的逻辑归纳能力、综合分析能力和文字表达能力,是科学

论文写作的基础。因此,参加实验的每位学生,均应及时认真地书写实验报告。要求内容实事求是,分析全面具体,文字简练通顺,誊写清楚整洁。 实验报告内容与格式 (一) 实验名称 要用最简练的语言反映实验的内容。如验证某程序、定律、算法,可写成“验证×××”;分析×××。 (二) 所属课程名称 (三) 学生姓名、学号、及合作者 (四) 实验日期和地点(年、月、日) (五) 实验目的 目的要明确,在理论上验证定理、公式、算法,并使实验者获得深刻和系统的理解,在实践上,掌握使用实验设备的技能技巧和程序的调试方法。一般需说明是验证型实验还是设计型实验,是创新型实验还是综合型实验。 (六) 实验内容 这是实验报告极其重要的内容。要抓住重点,可以从理论和实践两个方面考虑。这部分要写明依据何种原理、定律算法、或操作方法进行实验。详细理论计算过程. (七) 实验环境和器材 实验用的软硬件环境(配置和器材)。 (八) 实验步骤 只写主要操作步骤,不要照抄实习指导,要简明扼要。还应该画出实验流程图(实验装置的结构示意图),再配以

大工18春金工实习一实验报告及要求

https://www.360docs.net/doc/8f17354843.html, ------------------------------------------------------------------------------------------------------------------------------ 《金工实习(一)》实验报告及要求 学习中心:姓名: 1.请简述根据所起的作用不同,切削运动可分为哪两种运动。 答: 2.请简述卧式铣床的组成及其作用。 答: 3.请简述牛头刨床的组成及作用。 答: 4.刨床主运动是什么? 答: 5.平面磨床的组成及其作用有哪些? 答: 6.外圆磨床的组成及其作用有哪些? 答: 7.请简述Z412型台式钻床的工作特点。 答: 8.麻花钻的结构包括哪些? 答: 9.扩孔钻的特点有哪些? 答: 10.攻螺纹要点包括哪些? 答: 11. 学习心得 为区分实验报告是否独立完成,请写些自己对该实验课程的想法或者学习心得。 实验报告要求 一、课程考核形式 本课程的考核形式为离线作业(实验报告),无在线作业和考试。“离线作业

https://www.360docs.net/doc/8f17354843.html, ------------------------------------------------------------------------------------------------------------------------------ 及要求”在该课程的“离线作业”模块中下载。 二、离线作业要求 请根据课件中的操作及实验结果来认真填写实验报告,并提交至课程平台,学生提交的实验报告作为本课程考核的依据,未提交者无成绩。 《金工实习(一)》实验报告由车床的组成及调整、铣床的组成及铣削平面的方法、牛头刨床的组成及调整、磨床及磨削加工、钻床及钻孔加工方法、扩孔、锪孔及铰孔加工方法、螺纹的加工七个独立的部分构成,学生需要完成实验报告的全部内容。 三、离线作业提交形式 学生需要以附件形式上交离线作业(附件的大小限制在10M以内),选择已完成的作业,点“上交”即可。如下图所示。 四、离线作业批阅 老师会在作业关闭后集中批阅离线作业,在离线作业截止提交前不进行任何形式的批阅。 注意事项: 独立完成实验报告,不准抄袭他人或者请人代做,如有雷同,成绩以零分计!

大学物理实验报告答案大全(实验数据)

U 2 I 2 大学物理实验报告答案大全(实验数据及思考题答案全包括) 伏安法测电阻 实验目的 (1) 利用伏安法测电阻。 (2) 验证欧姆定律。 (3) 学会间接测量量不确定度的计算;进一步掌握有效数字的概念。 实验方法原理 根据欧姆定律, R = U ,如测得 U 和 I 则可计算出 R 。值得注意的是,本实验待测电阻有两只, 一个阻值相对较大,一个较小,因此测量时必须采用安培表内接和外接两个方式,以减小测量误差。 实验装置 待测电阻两只,0~5mA 电流表 1 只,0-5V 电压表 1 只,0~50mA 电流表 1 只,0~10V 电压表一 只,滑线变阻器 1 只,DF1730SB3A 稳压源 1 台。 实验步骤 本实验为简单设计性实验,实验线路、数据记录表格和具体实验步骤应由学生自行设计。必要时,可提示学 生参照第 2 章中的第 2.4 一节的有关内容。分压电路是必须要使用的,并作具体提示。 (1) 根据相应的电路图对电阻进行测量,记录 U 值和 I 值。对每一个电阻测量 3 次。 (2) 计算各次测量结果。如多次测量值相差不大,可取其平均值作为测量结果。 (3) 如果同一电阻多次测量结果相差很大,应分析原因并重新测量。 数据处理 (1) 由 U = U max ? 1.5% ,得到 U 1 = 0.15V , U 2 = 0.075V ; (2) 由 I = I max ? 1.5% ,得到 I 1 = 0.075mA , I 2 = 0.75mA ; (3) 再由 u R = R ( 3V ) + ( 3I ) ,求得 u R 1 = 9 ? 101 &, u R 2 = 1& ; (4) 结果表示 R 1 = (2.92 ± 0.09) ?10 3 &, R 2 = (44 ± 1)& 光栅衍射 实验目的 (1) 了解分光计的原理和构造。 (2) 学会分光计的调节和使用方法。 (3) 观测汞灯在可见光范围内几条光谱线的波长 实验方法原理

大学英语试卷及答案(1)

《大学英语》试卷及答案 学号:姓名:专业层次: 分数: 一.单项选择题(本大题共15小题,每小题2分,共30分) 1. The Business Banking Department is on_____C_______second floor. A. / B. a C. the 2. Maria often has a walk with______C______parents in the morning. A. she B. their C. her 3. There_____B_______four children in the picture. A. is B. are C. have 4. I’d like______A______oranges, please. A. some B. any C. / 5. ______B______does the flat cost a month? A. How many B. How much C. How about 6. I’m bad at spelling, but Jane is_____B_______than me. A. bad B. worse C. less 7. He______B______in Beijing, but his parents____________in Hangzhou. A. live, lives B. lives, live C. live, live 8. - I’m enjoying the long summer evenings. -____A________am I. A. So B. Neither C. Nor 9. I usually get up_____A_______7 o’clock in the moring. A. at B. in C. on 10. It often______B______in winter in the north of China. A. snow B. snows C. is snowing 11. —The second bedroom isn’t big enough. —Yes, I agree. It is______B______. A. small B. too small C. enough small 12. This is his book. Could you give it_____A_______him? A. to B. with C. for 13. I’m interested _____A_______cooking. A. in B. to C. at 14. I’d like to_______B_____you to a party this Saturday. A. join B. invite C. leave 15. When_______A_____for London? A. is she flying B. she flies C. she is going to fly 二.阅读理解(本大题共15小题,每小题2分,共30分)

大工19秋《电机与拖动实验》实验报告

网络教育学院电机与拖动实验报告 学习中心:汕头市知纳培训中心奥鹏学习中心层次:专升本 专业:电气工程及其自动化 学号: 学生: 完成日期: 2020年03 月01 日

实验报告一 实验名称:单项变压器实验 实验目的:1、通过空载和短路实验测定变压器的变比和参数。 2、通过负载实验测取变压器的运行特性。 实验项目:1、空载实验测取空载特性Uo=F(uo), P=F(uo) 2、短路实验测取短路特性Yk=F(Ik), PK=F(I) 3、负载实验保持U I =U1u1,cosφ2=1的条件下,测取U2=F(I2)(一)填写实验设备表

(二)空载实验 1.填写空载实验数据表格 2. 根据上面所得数据计算得到铁损耗Fe P 、励磁电阻m R 、励磁电抗m X 、电压比k

(三)短路实验 1.填写短路实验数据表格 O (四)负载实验 1. 填写负载实验数据表格 (五)问题讨论 1. 什么是绕组的同名端? 2. 为什么每次实验时都要强调将调压器恢复到起始零位时方可合上电源开关或断开电源开关? 尽可能避免因万一连线错误而造成短路,烧毁电源。

3. 实验的体会和建议 体会:通过实验我对变压器的参数有了进一步的认识和理解,对变压器的特性有了更具体深刻的体会,同时学会了在实验室应根据需要正确选择各仪表量程保护实验设备。 建议:数据的处理只用表格来进行了,显得比较粗糙,可以用图表来处理,结果会更直观。

实验报告二 实验名称:直流发电机实验 实验目的:掌握用实验方法测定直流发电机的运行特性,并根据所测得的运行特性评定该被试电机的有关性能 实验项目:空载特性外特性调整特性 (一)填写实验设备表

大学物理实验报告范例

怀化学院 大学物理实验实验报告系别数学系年级2010专业信息与计算班级10信计3班姓名张三学号**组别1实验日期2011-4-10 实验项目:验证牛顿第二定律

1.气垫导轨的水平调节 可用静态调平法或动态调平法,使汽垫导轨保持水平。静态调平法:将滑块在汽垫上静止释放,调节导轨调平螺钉,使滑块保持不动或稍微左右摆动,而无定向运动,即可认为导轨已调平。 2.练习测量速度。 计时测速仪功能设在“计时2”,让滑块在汽垫上以一定的速度通过两个光电门,练习测量速度。 3.练习测量加速度 计时测速仪功能设在“加速度”,在砝码盘上依次加砝码,拖动滑块在汽垫上作匀加速运动,练习测量加速度。 4.验证牛顿第二定律 (1)验证质量不变时,加速度与合外力成正比。 用电子天平称出滑块质量滑块m ,测速仪功能选“加速度”, 按上图所示放置滑块,并在滑块上加4个砝码(每个砝码及砝码盘质量均为5g),将滑块移至远离滑轮一端,使其从静止开始作匀加速运动,记录通过两个光电门之间的加速度。再将滑块上的4个砝码分四次从滑块上移至砝码盘上,重复上述步骤。 (2)验证合外力不变时,加速度与质量成反比。 计时计数测速仪功能设定在“加速度”档。在砝码盘上放一个砝码(即 g m 102=),测量滑块由静止作匀加速运动时的加速度。再将四个配重块(每个配重 块的质量均为m ′=50g)逐次加在滑块上,分别测量出对应的加速度。 【数据处理】 (数据不必在报告里再抄写一遍,要有主要的处理过程和计算公式,要求用作图法处理的应附坐标纸作图或计算机打印的作图) 1、由数据记录表3,可得到a 与F 的关系如下: 由上图可以看出,a 与F 成线性关系,且直线近似过原点。 上图中直线斜率的倒数表示质量,M=1/=172克,与实际值M=165克的相对误差: %2.4165 165 172=- 可以认为,质量不变时,在误差范围内加速度与合外力成正比。

大学英语考试卷

长江职业学院海事学院 2014-2015学年第一学期期末考试试卷 科目:大学英语期末试卷(B卷)考试类型:闭卷 (本试卷卷面总分100分,考试时间90分钟) 一、情景交际10*1′=10′分 Imagine you are meeting an English teacher from the USA at the airport. Put in the missing words. Sally: 1 _____________ me, can you help me? I'm going to Beach Hotel, but I've lost 2 _____________. Stranger: Go 3 _____________ this street until you come to West Avenue. Turn left there and go straight ahead about four blocks. The Beach Hotel is 4 _____________ of West Avenue and Main Street. Sally: I see. Thank you very much. 5 __________ the way, can I take a bus? Stranger: Yes. If you go there by bus, 6 ____________ Bus No. 15 and get 7 ____________ at the third stop. Sally: Where can I 8_____________ the bus, please? Stranger: The bus stop is over there in 9_____________ of the supermarket. Sally: 10 _____________ thanks. 二、词汇和结构15*1′=15′分 Fill in the blanks with the proper words or expressions given below, changing the form if necessary. 1.Nodding seems like an easy body language, but it may ____________agreement in one culture but totally the opposite in another. 2. Sorry, I can't give you an answer _____________ . I need to think about it further. 3. Always think positively, and it will__________________ in your life. 4.Our manager is at a conference. She can't ____________ to see you now. 5. Sometimes speaking up is not enough, and you need to ____________. 6. I'd like to ____________ some volunteer work if you don't accept my money. 7.The historical ____________ in support of this conclusion is weak. 8.The great progress they have made comes from their good ____________ work. 9. As ____________ of World Economic Forum, Dalian and Tianjin have both done a great job. 10. Of course I will _____________ what you feel about it, but business is business. 11. The freshmen could help ____________ the tickets for the college's “Do It Yourself Show”.

大学物理实验报告分光计

竭诚为您提供优质文档/双击可除大学物理实验报告分光计 篇一:大学物理实验报告答案大全(实验数据) 大学物理实验报告答案大全(实验数据及思考题答案全包括) 伏安法测电阻 实验目的(1)利用伏安法测电阻。(2)验证欧姆定律。 (3)学会间接测量量不确定度的计算;进一步掌握有效数字的概念。实验方法原理 根据欧姆定律,R??,如测得u和I则可计算出R。值得注意的是,本实验待测电阻有两只, 一个阻值相对较大,一个较小,因此测量时必须采用安培表内接和外接两个方式,以减小测量误差。实验装置待测电阻两只,0~5mA电流表1只,0-5V电压表1只,0~50mA 电流表1只,0~10V电压表一只,滑线变阻器1只, DF1730sb3A稳压源1台。 实验步骤本实验为简单设计性实验,实验线路、数据记录表格和具体实验步骤应由学生自行设计。必要时,可提示

学生参照第2章中的第2.4一节的有关内容。分压电路是必须要使用的,并作具体提示。(1)根据相应的电路图对电阻进行测量,记录u值和I值。对每一个电阻测量3次。(2)计算各次测量结果。如多次测量值相差不大,可取其平均值作为测量结果。(3)如果同一电阻多次测量结果相差很大,应分析原因并重新测量。数据处理 ;(1)由???u?umax??1.5%,得 到???u1??0.15V,???u2??0.075V (2)由???I?Imax??1.5%,得 到???I1??0.075mA,???I2??0.75mA; ??u2??I2 )??(,求得uR1?9??101??,uR2??1?;(3)再由uR?VI (4)结果表示R1?(2.92??0.09)??103??,R2??(44??1)?? 光栅衍射 实验目的 (1)了解分光计的原理和构造。(2)学会分光计的调节和使用方法。 (3)观测汞灯在可见光范围内几条光谱线的波长实验方法原理 若以单色平行光垂直照射在光栅面上,按照光栅衍射理论,衍射光谱中明条纹的位置由下式决定:=dsinψk=±kλ(a+b)sinψk

大学物理实验报告示例(含数据处理)

怀化学院 大学物理实验实验报告 系别物信系年级2009专业电信班级09电信1班姓名张三学号09104010***组别1实验日期2009-10-20 实验项目:长度和质量的测量

【实验题目】长度和质量的测量 【实验目的】 1. 掌握米尺、游标卡尺、螺旋测微计等几种常用测长仪器的读数原理和使用方法。 2. 学会物理天平的调节使用方法,掌握测质量的方法。 3. 学会直接测量和间接测量数据的处理,会对实验结果的不确定度进行估算和分析,能正确地表示测量结果。 【实验仪器】(应记录具体型号规格等,进实验室后按实填写) 直尺(50cm)、游标卡尺(0.02mm)、螺旋测微计(0~25mm,0.01mm),物理天平(TW-1B 型,分度值0.1g ,灵敏度1div/100mg),被测物体 【实验原理】(在理解基础上,简明扼要表述原理,主要公式、重要原理图等) 一、游标卡尺 主尺分度值:x=1mm,游标卡尺分度数:n (游标的n 个小格宽度与主尺的n-1小格长度相等),游标尺分度值: x n n 1-(50分度卡尺为0.98mm,20分度的为:0.95mm ),主尺分度值与游标尺 分度值的差值为:n x x n n x = -- 1,即为游标卡尺的分度值。如50分度卡尺的分度值为: 1/50=0.02mm,20分度的为:1/20=0.05mm 。 读数原理:如图,整毫米数L 0由主尺读取,不足1格的小数部分l ?需根据游标尺与主尺对齐的刻线数 k 和卡尺的分度值x/n 读取: n x k x n n k kx l =--=?1 读数方法(分两步): (1)从游标零线位置读出主尺的读数.(2)根据游标尺上与主尺对齐的刻线k 读出不足一分格的小数,二者相加即为测量值.即: n x k l l l l +=?+=00,对于50分度卡尺:02.00?+=k l l ; 对20分度:05.00?+=k l l 。实际读数时采取直读法读数。 二、螺旋测微器 原理:测微螺杆的螺距为0.5mm ,微分筒上的刻度通常为50分度。当微分筒转一周时,测微螺杆前进或后退0.5mm ,而微分筒每转一格时,测微螺杆前进或后退0.5/50=0.01mm 。可见该螺旋测微器的分度值为0.01mm ,即千分之一厘米,故亦称千分尺。 读数方法:先读主尺的毫米数(注意0.5刻度是否露出),再看微分筒上与主尺读数准线对齐的刻线(估读一位),乖以0.01mm, 最后二者相加。 三:物理天平 天平测质量依据的是杠杆平衡原理 分度值:指针产生1格偏转所需加的砝码质量,灵敏度是分度值的倒数,即n S m = ?,它表示 天平两盘中负载相差一个单位质量时,指针偏转的分格数。如果天平不等臂,会产生系统误差,消除方法:复称法,先正常称1次,再将物放在右盘、左盘放砝码称1次(此时被测质量应为砝码质量减游码读数),则被测物体质量的修正值为:21m m m ?=。 【实验内容与步骤】(实验内容及主要操作步骤)

大工15秋《金工实习(二)》实验报告

网络高等教育《金工实习(二)》实验报告 学习中心:鞍山奥鹏学习中心 层次:专升本 专业:机械设计制造及其自动化 年级: 15年秋季 学生姓名:张志国

1.车床安装工件时,注意事项有哪些? 答:答:车床安装工件时,注意事项如下: (1).只要满足加工要求,应尽量减少工件悬伸长度; (2)工件要装正夹牢; (3)夹紧工件后随手取下三爪扳手,以免开车后飞出伤人; (4)安装大工件时,卡盘下面要垫木板,以免工件落下,砸坏床身导轨 2.请简述车床在车削中试切的意义。 答:答:刻度盘和丝杠的螺距均有一定误差,往往不能满足精车尺寸精度的要求,在单件小批生产中常采用试切的方法来保证尺寸精度。 3.请简述三面刃铣刀及立铣刀的特点及使用场合。 答:三面刃铣刀:在其圆周和两个端面上均有刀齿。由于三面刃铣刀的结构特点。它可以在工件上同时铣削2-3个表面。立铣刀:在它的圆周及端部,有若干刀齿。套式立铣刀:对于直径较大的立铣刀一般采用空心结构。又称套式立铣刀。键槽铣刀:其端部为两个刀刃。它可以在工件上直接加切深。键槽铣刀一般安装在立式铣床或键槽铣床上。锯片铣刀通常安装在卧铣上。还有一些铣刀,专门加工一些特型沟槽。这些铣刀刀刃部分的轴面形状与被加工的沟槽截面吻合。 4.请简述刨床刨削T型槽的步骤。 答:刨床刨削T型槽的步骤:第一步:刨削顶面。第二步:换上切刀,按加工线刨直槽。第三步:换上右弯头刀,刨右凹槽,回程时抬刀要高于工件,使刨刀从槽外退回,以免损坏刨刀。这一点与刨平面不同。第四步,换上左弯头刀,刨左凹槽,工件进给方向与刨右凹槽相反。

5.请简述砂轮和砂轮的组成。 答:砂轮是磨削的切削工具,是由许多细小磨粒结合剂粘接而成的一种多孔物体。磨粒、结合剂和气孔是砂轮结构的三要素。磨粒起切削作用,结合剂起连接作用,气孔起形成切削刃,容纳屑沫,散热冷却的作用。根据磨料不同,常用的有刚玉类及氧化铝砂轮和碳化硅类砂轮。 6.请简述磨削加工范围。 答:磨削加工范围:磨平面、磨外圆、磨内圆外、磨螺纹、磨齿形、磨花键等磨削加工属于精加工,其主要特点是: (1)可获得较高的尺寸精度; (2)可获得较小的表面粗糙度Ra值; (3)可加工高硬度的工件材料,如:淬硬钢、硬质合金和玻璃等。但一般不宜加工韧性较大 的有色金属。 7.请简述微机数控线切割机床加工工件的操作流程。 答:微机数控线切割机床加工工件的操作流程如下: 1、根据零件形状和尺寸进行编程,自动编程机具有键盘输入、数据显示、屏幕作图和纸带穿孔等多种功能,可大大提高编程效率。 2、穿孔纸带输入机将编好的加工程序自动输入计算机。 3、将穿好钼丝的工件安装在工作台上:加工具有内封闭几何图图形的工件时,需要在工件加工部位,首先钻一个工艺,以便钼丝从孔中传入。 4、调整好机床和放电参数。 5、进行线切割加工。

大学物理实验报告优秀正式版

For the things that have been done in a certain period, the general inspection of the system is also a specific general analysis to find out the shortcomings and deficiencies 大学物理实验报告优秀正 式版

大学物理实验报告优秀正式版 下载提示:此报告资料适用于某一时期已经做过的事情,进行一次全面系统的总检查、总评价,同时也是一次具体的总分析、总研究,找出成绩、缺点和不足,并找出可提升点和教训记录成文,为以后遇到同类事项提供借鉴的经验。文档可以直接使用,也可根据实际需要修订后使用。 大学物理实验报告模板 实验报告 一.预习报告 1.简要原理 2.注意事项 二.实验目的 三.实验器材 四.实验原理 五.实验内容、步骤 六.实验数据记录与处理 七.实验结果分析以及实验心得 八.原始数据记录栏(最后一页)

把实验的目的、方法、过程、结果等记录下来,经过整理,写成的书面汇报,就叫实验报告。 实验报告的种类因科学实验的对象而异。如化学实验的报告叫化学实验报告,物理实验的报告就叫物理实验报告。随着科学事业的日益发展,实验的种类、项目等日见繁多,但其格式大同小异,比较固定。实验报告必须在科学实验的基础上进行。它主要的用途在于帮助实验者不断地积累研究资料,总结研究成果。 实验报告的书写是一项重要的基本技能训练。它不仅是对每次实验的总结,更重要的是它可以初步地培养和训练学生的逻辑归纳能力、综合分析能力和文字表达

大学英语试卷

2012年《大学英语》试题 考试时间:120分钟 I. Choose the best answer (1’×10=10’) 1. Over a third of the population was estimated to have no ______ to health service. A. access B. attachment C. appeal D. approach 2. Even though they are poor, they are against the plan to trade land ______ goods and money. A. on B. by C. with D. for 3. What a lovely party! It’s worth ______ all my life. A. remembering B. to remember C. to be remembered D. being remembered 4. On hearing the news, the mother _______ into tears and rushed out of the room, followed by a few other people. A. attacked B. burst C. split D. blasted 5. You have to be patient small children, since they cannot tell the difference between what is wrong and what is right. A. with B. from C. to D. in 6. He managed to hide his _______ and moved to a new town where people would not know him. A. evidence B. recognition C. status D. identity 7. Companies are struggling to find the right ________ between supply and demand, but it is not an easy task. A. equation B. formula C. balance D. pattern 8. Please turn all the lights as you leave the classroom. A. down B. off C. on D. up 9. Be quiet; you father’s asleep; don’t wake him . A. down B. up C. on D. out 10. For the next two hours she was _______ in the film, which turned out to be as good as she had hoped. A. absorbed B. abandoned C. focused D. centered II. Reading comprehension. (2’×20=40’) Passage 1 In the United States, teaching is very important. If teachers don’t teach well, students complain. If many students do not understand, people think that the teacher doesn’t do a good job. The teacher has big responsibility to make sure students understand. In a sense, students are consumers and the teacher is offering services. Students have the right to evaluate their teachers, and they usually do so at the end of each course. The evaluation includes lots of aspects of teaching. Such as explanation, preparation, using good example, answering question, and organization of classes. Students are supposed to read required textbooks and recommended books before classes. Without reading them, they will find it very difficult to understand the class. Basic courses on doing research and writing papers are taught at the beginning of the program. They teach things very concretely(具体的) and clearly. Students are expected to apply what they have learnt to their studies. Classes are usually divided into lectures and seminars. There are some lecture classes, where the teacher just gives a lecture, and students ask questions at the end. Most graduate level classes are lectures and discussions. Participating in discussions is very important. Higher level classes involve very little lecturing. They emphasize discussion and presentation by the students. 11. According to the passage, good teachers should _______. A. try to please their students B. treat their students as consumers C. understand their students well D. make sure their students understand 12. Teachers are evaluated by students mainly on ______.

相关文档
最新文档