阀门与管件(Valves and Fittings)中英文名称对照简表
阀门与管件(Valves and Fittings)中英文名称对照简表
1.Valves 阀门
valve 闸阀 gate
valve 截止阀；球心阀 globe
valve 角(接)阀 angle
旋塞阀 plug
valve
cock
valve 球阀 ball
ball
valve 自由式球阀 free
固定式球阀fixed ball valve
valve 止回阀 check 角接式升降止回阀angle lift check valve
截止式升降止回阀globe lift check valve
valve 隔膜阀 diaphragm 斜盘式止回阀tilting-disk check valve
check
valve 旋启式止回阀 swing
直立升降式止回阀vertical lift check valve
蝶阀butterfly valve
弹簧安全泄压阀spring safety-relief valve
调节阀control valve
单向阀non-return valve
疏水阀trap valve
2. Fittings 管件
2.1 Joints in tubing and pipe 管子连接
weld 对焊 butt
承插焊 socket
weld
weld 支管焊接 branch
外加补强 added
reinforcement
thread
pipe 圆锥管螺纹连接 taper
密封焊 seal-welded
joint 承插浇注连接 poured
joint 喇叭口连接 flared-fitting
joint 插入夹紧连接 champed-insert
joint 法兰连接 flanged
咬紧连接bite-type fitting joint
joint 推紧连接 push-on
软钎焊连接 soldered
joint
joint 硬钎焊连接 brazed
joint 水泥连接 cemented
填料压紧连接 packed-gland
joint
joint 胀管连接 expanded
joint 压紧密封连接 pressure-seal 活接头 union
凹槽连接 grooved
joint
joint 卡箍连接 clamp 承口 bell
插口 spigot
螺栓 bolt
螺母 nut
垫片 gasket 带颈对焊法兰welding neck flange
end 短管头 stub
ring 密封环 seal
2.2 Flanged fittings 法兰管件
90°带法兰弯头 90° flanged elbow
90°长半径弯头 90°long radius elbow
90°异径弯头 90° reducing elbow
45°带法兰弯头 45° flanged elbow
reducer 带法兰异径管(大小头) flanged
同心异径管 concentric
reducer
reducer 偏心异径管 eccentric 带法兰等径三通flanged tee (straight size)
异径三通reducing tee on outlet
主管一端为异径的三通reducing tee on one run
支管为异径的斜三通reducing lateral on branch
主管一端为异径的斜三通reducing lateral on one run
双支管弯头double branch elbow
straight
size 等径四通 cross 出口一端为异径的四通reducing cross on one run
出口两端均为异径的三通reducing cross on both outlet
2.3 Threaded fittings 螺纹管件
90°螺纹弯头 90°threaded elbow
tee 带螺纹三通 threaded
cross 带螺纹四通 threaded
45°螺纹弯头 45°threaded elbow
带螺纹异径三通threaded reducing tee
45°Y形三通（等径） 45°Y-branches (straight size)
coupling 缩径管接头 reducing
带内外螺纹的弯管接头 street
elbow 异径螺纹弯管reducing threaded elbow
45°异径弯头 45°street elbow
tee 异径三通 street 管帽 cap
bend 180°回弯头 return
coupling 半管接头 half
丝堵 plug
活接头 union 3. Flanges 法兰
3.1 Flanged connection 法兰连接
螺母 nut
法兰 flange
螺栓 bolt
垫片 gasket
垫圈 washer 3.2 Flange type 法兰型式
板式法兰plate-type flat welding flange
带颈平焊法兰slip-on weld hubbed flange
带颈对焊法兰welding neck flange
整体法兰integral type flange
flange 承插焊接法兰 socket-welding
flange 螺纹法兰 threaded
joint
flange 松套法兰 lap
flange 法兰盖 blind
flange 衬里法兰盖 lined
blind
3.3 Type of flange facing 法兰密封面型式
face 全平面密封面 flat
face 突面 raised 凹凸密封面male-female seal contaced face
凸面法兰 male
flange
flange 凹面法兰 female
榫槽密封面tongue-groove seal contace face
flange 榫面法兰 tongued
flange 槽面法兰 grooved
环槽密封面ring type joint face
4. Piping system 管系
4.1 Types of reinforcement for branch connections 支管接口的补强型式
reinforcement 环形板补强 ring(pad)-type
saddle 补强鞍座 reinforcing
围板补强complete encirclement pad
reinforcement 马蹄形板和角板式补强 horseshoe-and-gusset
type
collar 补强环圈 reinforcing 三角平衡式补强 balanced
triform
tee 焊接三通 welding
集合管 header
补强肩 shoulder
岔口管套 crotch
pipe 支管 branch
管件标准中英文对照
管件标准中英文对照 Standard Code 规范代号 Standard Name 规范名称 ASME SA-234 中、高温用钢制碳钢和合金钢管道配件 Medium and high temperature used carbon and alloy steel pipe fittings ASME SA-420 低温用锻制碳钢和合金钢管配件 Low temperature forged carbon and alloy steel pipe fittings ASME SA-403 锻制奥氏体不锈钢管配件 Forged Durimet pipe fittings ASME B16.9 工厂制造的钢制对焊管件 Factory-Made wrought steel pipe fittings ASME B16.11 承插焊和螺纹锻钢管件 Socket-welding and Threaded forged fittings ASME B16.28 锻钢对焊小半径弯头和回弯头 Wrought steel butt-welding short radius elbows and returns ISO 5251 不锈钢对焊管件 Stainless steel butt-welding fittings MSS SP-43 锻制不锈钢对焊管件 Wrought stainless steel butt-welding fittings MSS SP-75 锻钢制对焊管件 Forging butt-welding fittings MSS SP-79 承插焊异径插入件 Socket-welding reducing Inserts MSS SP-83 3000磅级的钢制承插焊和螺纹活接头 Class 3000 steel socket-welding and threaded unions MSS SP-95 缩渐管和圆堵头 Swaged nipples and round plugs MSS SP-97 承插焊、螺纹和对焊端的整体加紧式管座 SW 、TH and BW ends for integrally reinforced forged branch outlet JIS B2311 通用钢制对焊管件 Universal steel butt-welding pipe fittings JIS B2312 钢制对焊管件 Steel butt-welding pipe fittings JIS B2313 钢板制对焊管件 Steel plate butt-welding pipe fittings JIS B2316 钢制承插焊管件 Steel socket-welding pipe fittings DIN 2605 钢制对焊管件弯头和弯管 Steel butt-welding pipe fittings.elbows and bends DIN 2615 钢制对焊管件三通 Steel butt-welding pipe fittings.tees DIN 2616 钢制对焊管件异径管 Steel butt-welding pipe fittings.reducers
管件的英文对照表
管件的英文对照表活接 活接loosejoint 活接地swingingearth 活接结合articulatedjoint 活接联接器jointcoupling 活接三通uniontee 活接头articulation;unionswivel;union 活接头螺母unionnut 活接头螺栓swingbolt 活接头套管unionthimble 活接卸槽articulatedchute(浇混凝土用的)弯头 弯头anglefittings;bentpipe;elbow;knee 弯头扳手bent-handlewrench;bentspanner 弯头车刀angulartool 弯头持针钳curvedneedleholders 弯头刀架kneetool 弯头道钉brob 弯头管swanneck 弯头键gibheadkey
弯头接合knee-joint 弯头螺栓boltwithoneendbentback 弯头锁紧螺母elbowjamunt 弯头套管elbowunion 弯头套筒扳手offsetsocketwrench 弯头脱水器elbowseparator 弯头芯盒elbowcorebox 三通 三通玻璃栓three-wayglassstopcock 三通道放大器three-channelamplifier;three-pathamplifier 三通道自动驾驶仪three-dimensionalautopilot 三通电缆分线盒three-waycouplingbox 三通阀teevalve;three-portvalve;three-wayvalve;triplevalve 三通阀盖triple-valvecap 三通阀活塞triple-valvepiston 三通阀联箱threewayvalvemenifold 三通阀体triplebody;triple-valvebody 三通管singlesweeptee;T-branch(pipe);three-limbtube 三通管接头teepipecoupling 三通横长horizontallengthoftee 三通换向旋塞three-wayreversingcock
无缝钢管英文管材管件中英词汇对照表
无缝钢管英文管材管件中英词汇对照表 无缝钢管英文管材管件中英词汇对照表 管子(按照配管标准规格制造的) pipe 钢管(不按配管标准规格制造的其他用管) tube 钢管steel pipe 铸铁管cast iron pipe 管子Pipe 管子(按照配管标准规格制造的) pipe 管子(不按配管标准规格制造的其他用管) tube 钢管steel pipe 铸铁管cast iron pipe 衬里管lined pipe 复合管clad pipe 碳钢管carbon steel pipe 合金钢管alloy steel pipe 不锈钢stainless steel pipe 奥氏体不锈钢管austenitic stainless steel pipe 铁合金钢管ferritic alloy steel pipe 轧制钢管wrought-steel pipe 锻铁管wrought-iron pipe 无缝钢管seamless (SMLS) steel pipe 焊接钢管welded steel pipe 电阻焊钢管electric-resistance welded steel pipe 电熔（弧）焊钢板卷管electric-fusion (arc)-welded steel-plate pipe 螺旋焊接钢管spiral welded steel pipe 镀锌钢管galvanized steel pipe 热轧无缝钢管hot-rolling seamless pipe 冷拔无缝钢管cold-drawing seamless pipe 水煤气钢管water-gas steel pipe 塑料管plastic pipe 玻璃管glass tube
对照表 20系列泵配件名称中英文对照
20系列泵马达中英文名称对照表 序号英文名称中文名称1servo valve assembly控制阀总成 2charge pump cw 补油泵charge pump ccw 3servo cylinder伺服油缸 4servo piston伺服活塞 5front cover前端盖 6pump housing泵壳体 7end cap后端盖 8swash plate斜盘架 9check valve单向阀 10cylinder barrel housing缸体 11piston assembly柱塞滑靴 12bearing plate衬板(支承盘) 13retainer guide球铰 14slipper retainer回程盘 15spring retainer缸体弹簧上片16spring seat缸体弹簧下片17spring guide缸体弹簧衬套18bearing plate pilot衬板定位环19pin缸体衬板定位销20cylinder barrel spring缸体中心弹簧21retainer spring球铰弹簧 22retaining ring中心弹簧卡簧23thrust plate止推盘 24valve plate CW 配油盘valve plate CCW 配油盘 25trunnion耳轴端盖 26seal retainer组合密封铝盘 27rotating seal组合密封铜环 28stationary seal组合密封钢环 29drive shaft主轴 30servo link伺服油缸连杆 31sleeve retainer伺服油缸定位半环片
32spring guide伺服油缸弹簧压套 33shim轴承调整垫片 34washer伺服油缸弹簧压套螺栓垫片35orifice控制阀节流片 36spacer控制手柄衬环 37control handle控制手柄 38loop吊装勾片 39cap塑料盖（AB油口） 40no型号标牌 41control valve gasket控制阀密封垫片 42charge pump gasket补油泵密封垫片 43shim pack耳轴调整垫片 44end cap gasket后端盖密封垫片 45front cover gasket前端盖密封垫片 46no 47seal spring组合密封弹簧 48servo spring伺服油缸弹簧 49nut控制阀螺栓 50plastic plug塑料盖（回油口） 51plug堵头 52expander 05堵塞 53expander 09堵塞 54hex head screw控制阀六角螺栓 55hex head screw补油泵螺栓 56no 57hex head screw前端盖螺栓（短） 58end cap screw后端盖螺栓（短） 59end cap screw后端盖螺栓（长） 60screw伺服弹簧紧固螺栓 61hex head screw耳轴六角螺栓 62pin控制阀和斜盘连杆销 63pin活塞和斜盘连杆销 64drive screw组合密封静环定位销 65pin配油盘定位销 66pin前端盖定位销 67retaining ring前轴端卡簧
管件中英文对照表(常用)
碳钢弯头 Carbon Steel Elbow 不锈钢弯头 Stainless Steel Elbow 高压弯头 High-Pressure Elbow 同心异径管 Concentric Reducers 偏心异径管 Eccentric Reducers 高压异径管 High-pressure Reducers 不锈钢等径三通 Stainless Straight Tee 碳钢等径三通 Carbon Straight Tee 不锈钢等径四通 Stainless Straight Cross 高压三通 High-pressure Tee 锻制三通 Forged Tee 异径接头 Template 管帽 Caps 法兰flange 长径和短径弯头 long and short radius elbows 同心和偏心异径接头 concentric and eccentric reducers 等径和异径三通 straight and reducing outlet tees 大小头 CONCENTRIC REDUCER 相等的三通Tee Equal 等径三通Straight Tee 异径三通Reducing Tee 等径四通Straight Cross 90°短半径弯头90°SS Elbow(SR) U型管Return Bend
90°长半径弯头90°SS Elbow (LR) 高压厚壁弯头Thickness Elbow 盲法兰Blank Flange 弯管Bends 翻边stub ends 异径接头reducers 公称通径 nominal diameter 外径(mm) outside diameter 中心距至端面的距离 center to end 理论重量(kg/pcs) approx weight 类种description 标准Standard 类型Design 材质Material 双丝头 Nipple 同心异径短节 SWAGE Nipple 活接头 Union PLUG HEX HEAD六角管堵 PLUG HEX HEAD SCRD六角螺纹管堵 MPT螺纹 RC螺纹螺桩 stud SWAGE (CONC)同 心异径短节 单承口管箍 Half-Coupling 异径管箍Coupling, Reducing 盲板 Blind Flange 带双圈的盲板spectacle blind 偏心的Ecentric 等径直通equal coupling 内牙直通 female coupling 外牙直通 straight tube with outside 90等径弯头 90 equal elbow 45等径弯头 45 equal elbow
管件中英文对照表
1.2 管件 Fitti ng 弯头elbow 异径弯头 reducing elbow 带支座三通 base tee 异径三通（一个直通口及分支口为异径） reduc ing tee (reduc ing on one run and outlet) 异径三通（两个直通口为异径，双头式） head ） 45 ° 斜三通 45 ° lateral reduc ing tee (reduc ing on both runs, bull 45 ° 斜三通(支管为异径) 45 ° lateral (reduci ng on bran ch) 45 ° 斜三通(一个直通口为异径 )45 ° lateral (reducing on one run) 45 ° 斜三通(一个直通口及支管为异径 )45 ° lateral (reducing on one run and branch) 四通cross （一个直通口及两个分支口为异径） both outlet ） 异径管reducer reduc ing cross (reduc ing on one run and 螺纹支管台 threadolet 等径四通 straight cross 异径四通 reduc ing cross 异径四通 （一个分支口为异径） reduc ing cross (reduc ing on one outlet) 异径四通 outlet ） 异径四通 （一个直通口及分支口为异径） reduc ing cross (reduc ing on one run and （两个分支口为异径） reduc ing cross (reduc ing on both outlet) 同心异径管 concen tric reducer 偏心异径管 ecce ntric reducer 锻制异径管 reduc ing swage 焊接支管台 weldolet 带支座弯头 base elbow k 半径弯头 long radius elbow 短半径弯头 short radius elbow 长半径180 短半径180 ° 弯头 long radius return ° 弯头 short radius return 带侧向口的弯头（右向或左向） side outlet elbow (right hand or left hand) 双支管弯头（形） double branch elbow 三通tee 异径三通 reducing tee 等 径三通straight tee 带侧向口的三通（右向或左向） side outlet tee (right hand or 1eft hand) 异径三通（分支口为异径） reduc ing tee (reduc ing on outlet) 异径三通（一个直通口为异径） reduc ing tee (reduc ing on one run) Y 型三通（俗称裤衩） true “ Y” 异径四通
阀门部件中英文对照
阀门部件中英文对照 阀 valve 阀板 valve deck plate 阀板 valve plate 阀板式活塞泵 valve deck plate type piston pump 阀板式活塞泵 valve plate type piston pump 阀瓣 Disc 阀操纵杆 valve operating rod 阀痤槽 valve seat recess 阀挡 valve grid 阀挡 valve positioner 阀挡 valve stop 阀导杆 valve tail rod 阀导向器 valve guide 阀盖 bonnet 阀盖衬套 bonnet bush 阀盖垫片 bonnet gasket 阀杆 stem 阀杆 valve rod 阀杆 valve spindle 阀杆端部尺寸 Dimmension of valve stem end 阀杆环 stem ring 阀杆螺母 Yoke bushing Yoke nut 阀杆填料 stem packing 阀杆头部尺寸 Dimension of valve stem head 阀簧 valve spring 阀簧压板 valve spring plate 阀控水锤泵 valve-controlled hydraulic ram 阀框架 valve yoke 阀门 Valve 阀门传动装置 valve bandle set 阀门和管件 Valves and Fittings 阀门盘根 valve packing 阀门手柄 valve handle 阀盘 disc 阀盘 valve disc 阀片 Disc 阀球 valve ball 阀驱动臂 valve driving arm 阀驱动臂 valve motion arm 阀式活塞 valve type piston 阀式活塞 valve type bucket 阀室式活塞泵 valve box type piston pump
管材、管件、阀门、接头、管道特件、紧固件、密封等中英文对照
管材、管件、阀门、接头、管道特件、紧固件、垫片、密封、工程材料等中英文对照 化工管道设计技术英语词汇(1－2－3) 1 管道组成件 Piping component 1.1 管子 Pipe 管子(按照配管标准规格制造的) pipe 管子(不按配管标准规格制造的其他用管) tube 钢管 steel pipe 铸铁管 cast iron pipe 衬里管 lined pipe 复合管 clad pipe 碳钢管 carbon steel pipe 合金钢管 alloy steel pipe 不锈钢 stainless steel pipe 奥氏体不锈钢管 austenitic stainless steel pipe 铁合金钢管 ferritic alloy steel pipe 轧制钢管 wrought-steel pipe 锻铁管 wrought-iron pipe 无缝钢管 seamless (SMLS) steel pipe 焊接钢管 welded steel pipe 电阻焊钢管 electric-resistance welded steel pipe 电熔（弧）焊钢板卷管 electric-fusion (arc)-welded steel-plate pipe 螺旋焊接钢管 spiral welded steel pipe 镀锌钢管 galvanized steel pipe 热轧无缝钢管 hot-rolling seamless pipe 冷拔无缝钢管 cold-drawing seamless pipe 水煤气钢管 water-gas steel pipe 塑料管 plastic pipe 玻璃管 glass tube 橡胶管 rubber tube 直管 run pipe; straight pipe 1.2 管件 Fitting 弯头 elbow 异径弯头 reducing elbow 带支座弯头 base elbow k半径弯头 long radius elbow 短半径弯头 short radius elbow 长半径180°弯头 long radius return 短半径180°弯头 short radius return 带侧向口的弯头（右向或左向） side outlet elbow (right hand or left hand) 双支管弯头（形） double branch elbow
管件中英文对照表1
1.2 管件 Fitting 弯头 elbow 异径弯头 reducing elbow 带支座弯头 base elbow k半径弯头 long radius elbow 短半径弯头 short radius elbow 长半径180°弯头 long radius return 短半径180°弯头 short radius return 带侧向口的弯头（右向或左向） side outlet elbow (right hand or left hand) 双支管弯头（形） double branch elbow 三通 tee 异径三通 reducing tee 等径三通 straight tee 带侧向口的三通（右向或左向） side outlet tee (right hand or 1eft hand) 异径三通（分支口为异径） reducing tee (reducing on outlet) 异径三通（一个直通口为异径）reducing tee (reducing on one run) 带支座三通 base tee 异径三通（一个直通口及分支口为异径） reducing tee (reducing on one run and outlet) 异径三通（两个直通口为异径，双头式） reducing tee (reducing on both runs, bull head) 45°斜三通 45° lateral 45°斜三通（支管为异径） 45° lateral (reducing on branch) 45°斜三通(一个直通口为异径) 45° lateral (reducing on one run) 45°斜三通(一个直通口及支管为异径) 45° lateral (reducing on one run and branch) Y型三通（俗称裤衩）true “Y” 四通 cross 等径四通 straight cross 异径四通 reducing cross 异径四通（一个分支口为异径）reducing cross (reducing on one outlet) 异径四通（一个直通口及分支口为异径） reducing cross (reducing on one run and outlet) 异径四通（两个分支口为异径） reducing cross (reducing on both outlet) 异径四通（一个直通口及两个分支口为异径） reducing cross (reducing on one run and both outlet) 异径管 reducer 同心异径管 concentric reducer 偏心异径管 eccentric reducer 锻制异径管 reducing swage 螺纹支管台 threadolet 焊接支管台 weldolet 承插支管台 sockolet
英文阀门名称大全
阀门大全（中英对照） 发帖人: 77鲜点击量: 1817 air-compressor valve 空气压缩机阀门 automatic cutout valve 自动切断阀门 backlash valve 无游隙阀门 High temperature valve 高温阀门 hose valve 水带阀门 pipe manifold valves 管道汇集器阀门 pneumatic cylinder cock valve 风动汽缸排水阀阀门pneumatic positioner valve 气动阀门定位器 pneumatic sander valve 风动撒砂器阀门 quick opening valve 快开阀门 quick-opening gate valve 速启阀门 standby valve 应急阀门; 备用阀门 two selenoid 双螺管阀门 valve chest 阀门室 valve clearance 阀门间隙；阀余隙 valveman 阀门操作者 wash-out valve 清洗阀门 adjusting valve 调整阀, 调节阀 admission valve 进气阀; 进浆阀 air admission valve 进气阀 air bleed(ing) valve 排气阀; 排气嘴 air control valve 空调阀 air cylinder valve 气筒阀 air escape valve 泄气阀 air inlet valve (=air intake valve) 进气阀; 进风阀 air operated throttle motor 风动节流器, 风动节流阀马达 air pilot valve 空气导向阀 air pressure governor valve 风压调压阀 air relay valve 空气中继阀 air release valve (=air relief valve) 排气阀; 放空阀 air reversing valve 空气换向阀 air shut-off valve 空气关闭阀 air signal reducing valve 空气信号减压阀
管件中英文对照表
弯头 elbow 异径弯头reducing elbow 带支座弯头base elbow 长半径弯头（标准 1.5 倍弯曲半径 ---1.5D ） long radius elbow 三通 tee 异径三通 reducing tee 等径三通 straight tee 带侧向口的三通（右向或左向） side outlet tee （right hand or 1eft hand）异径三通（分支口为异径）reducing tee （reducing on outlet）异径三通（一个直通口为异径）reducing tee （reducing on one run）带支座三通base tee 异径三通（一个直通口及分支口为异径）reducing tee （reducing on one run and outlet）异径三通（两个直通口为异径，双头式）reducing tee （reducing on both runs, bull head） 45 °斜三通 45 °lateral 45 °斜三通（支管为异径）45 °lateral （reducing on branch）45 °斜三通（一个直通口为异径）45 °lateral （reducing on one run） 45 °斜三通（一个直通口及支管为异径）45 °lateral （reducing on one run and branch） Y 型三通（俗称裤衩） true “ Y” 四通 cross 等径四通straight cross 异径四通reducing cross 异径四通(一个分支口为异径) reducing cross (reducing on one outlet) 异径四通(一个直通口及分支口为异径) reducing cross (reducing on one run and outlet) 异径四通(两个分支口为异径) reducing cross (reducing on both outlet) 异径四通(一个直通口及两个分支口为异径) reducing cross (reducing on one run and both
管件中英文对照表
管件中英文对照表 1、法兰Flange(FLG）整体管法兰integral pipe flange 钢管法兰steel pipe flange 螺纹法兰threaded flange 滑套法兰（包括平焊法兰）slip-on flange(SO);slip-on welding flange 承插焊法兰socket welding flange 松套法兰lap joint flange(LJF) 对焊法兰welding neckflange(WNF) 法兰盖blind flange,blind 孔板法兰orifice flange 异径法兰reducing flange 盘座式法兰pad type flange 松套带颈法兰loose hubbed flange 焊接板式法兰welding plate flange 对焊环welding neck collar（与stub end相似） 平焊环welding-on collar 突缘短节stub end,lap 翻边端lapped pipe end 松套板式法兰loose plate flange 压力级pressure rating,pressure rating class 压力—温度等级pressure-temperature rating 法兰密封面，法兰面flange facing 突面raised face(RF) 凸面male face(MF) 凹面female face(FMF) 榫面tongue face 槽面groove face 环连接面ring joint face 全平面；满平面flat face;full face(FF) 光滑突面smooth raised face(SRF) 法兰面加工facing finish 粗糙度roughness 光滑的smooth 齿形serrated 均方根root mean square(RMS) 算术平均粗糙高度arithmetical average roughness height(AARH) 配对法兰companion-flange 螺栓圆bolt circle(B.C.)
阀门中、英文对照表
阀门valve lead; valve 阀门扳手valve key 阀门操纵程序valve management program 阀门尺寸valve size 阀门的研磨grinding-in of valve 阀门垫圈valve washer 阀门定位器pneumatic servo; valve positioner 阀门定位伺服回路valve positioning servo loop 阀门杆valve lever 阀门杆导路guide for the valve rod 阀门钢valve steel 阀门活塞valve piston 阀门间隙valve clearance 阀门键valve key 阀门开度valve opening 阀门控制valve control 阀门控制机构valve control mechanism 阀门密封valve seal 阀门磨床valve grinding machine 阀门碰撞knocking of the valve 阀门切换型蓄热式heat accumulating type of shift change 阀门升程valve lift 阀门式给水栓gate-type hydrant 阀门式消防龙头gate-type hydrant 阀门室valve box 阀门手轮valve handle 阀门铣床valve milling machine 阀门箱valve box 阀门型式valve type 阀门座valve seat 回答者：llyshirley - 举人五级3-21 11:16 adjusting valve 调整阀, 调节阀 admission valve 进气阀; 进浆阀 agitating valve 搅拌桨 air valve (空)气阀 air admission valve 进气阀 air bleed(ing) valve
管件中英文对照
管件中英文对照(2007-07-15 11:42:00) 等径直通equal coupling 异径直通reducing coupling 内牙直通 female coupling 外牙直通 straight tube with outside 90等径弯头 90 equal elbow 45等径弯头 45 equal elbow 外牙弯头 male elbow 内牙弯头 female elbow 等径三通 equal tee 异径三通 reducing tee 内牙三通female tee 外牙三通 male tee 管帽cap sch代表压力 lr长半径或1倍半 大小 SIZE 数量 QTY 碳钢弯头 Carbon Steel Elbow 不锈钢弯头 Stainless Steel Elbow 高压弯头 High-Pressure Elbow 同心异径管 Concentric Reducers 偏心异径管 Eccentric Reducers 高压异径管 High-pressure Reducers 不锈钢等径三通 Stainless Straight Tee 碳钢等径三通 Carbon Straight Tee 不锈钢等径四通 Stainless Straight Cross 高压三通 High-pressure Tee 锻制三通 Forged Tee
异径接头 Template 管帽 Caps 法兰flange 长径和短径弯头 long and short radius elbows 同心和偏心异径接头 concentric and eccentric reducers 等径和异径三通 straight and reducing outlet tees 大小头 CONCENTRIC REDUCER Tee Equal 相等的三通 等径三通Straight Tee 异径三通Reducing Tee 等径四通Straight Cross 90°短半径弯头90°SS Elbow (SR) 90°长半径弯头90°SS Elbow (LR) 高压厚壁弯头Thickness Elbow U型管Return Bend 盲法兰Blank Flange 弯管Bends 翻边stub ends 异径接头reducers 公称通径 nominal diameter 外径(mm) outside diameter 中心距至端面的距离 center to end 理论重量(kg/pcs) approx weight description 类种 Standard标准 Design类型 Material材质 双丝头 Nipple 短节 SWAGE NIPPLE
阀门及配件的中英文对照较全
阀门英文对照 Handle Nut 手柄螺母 Handle Sleeve 手轮套管 Hard Seal Butterfly Valves 金属密封碟阀 High Temperature Pressure Power Station Gate Valves 高温高压电站闸阀High Temperature Pressure Power Station Globe Valves 高温高压电站截止阀Hoop 卡箍 Hayne's alloy 钴铬钨合金 High tem perature steel 高温钢 Hand-operated valves 手动阀 Hard Seal Butterfly Valves 金属密封碟阀 Hydraulic relay valves 液压继动阀 Hex Hut 手轮螺帽 Hydraulic Hand Gun 手动液压加注枪 Identification Plate 铭牌Integral Seat 整体阀座 Indicator 指示环Indicator Plug 指示塞 ISO flange dimensions ISO 法兰尺寸ISO bolt circle ISO 螺栓外径 Inside theread 内螺纹 Inspection And Test 检验和试验 Lifting Eye Bolt 吊眼螺栓 Lower Stem 下部阀杆 Lower Bearing 下部轴承 Lower Bushing 下部衬套 Liner 衬垫 lug style 吊耳式（蝶阀） Locking Device 锁定装置 Lift Check Valves 升降式止回阀 Lining Ball Valves 衬里球阀 Lining Butterfly Valves 衬里碟阀 Lining Check Valves 衬里止回阀 Lining Cock 衬里二通 Lining Globe Valves 衬里截止阀 Lining T-Cock Valves 衬里三通旋塞阀 Liquid Indicator 液位计 LPG Pipe Fitting 液化气管件 Low tem perature steel 低温钢 Limit valves 限位阀 Lining Ball Valves 衬里球阀 Lining Butterfly Valves 衬里碟阀 Lining Check Valves 衬里止回阀 Lining Cock 衬里二通 Lining Globe Valves 衬里截止阀 Lining T-Cock Valves 衬里三通旋塞阀
中英文阀门对照表
1-01 自动阀门 Self-acting valve 依靠介质本身的能力而自行动作的阀门 1-02 驱动阀门 Actuanted valve 借助手动、电力、液压或气压来操纵的阀门 2-01 闸阀 Gate valve,slide valve 启闭件（闸板）由阀杆带动，沿阀座密封面做升降运动的阀门 2-02 平行式闸阀Parallel gate valve,parallel slide valve 闸板的两侧密封面相互平行的闸阀 2-03 楔式闸阀 Wedge gate valve 闸板的两侧密封面成楔状的闸阀 2-04 升降杆式闸阀 Outside screw stem rising through handwheel type gate valve 阀杆做升降运动，其传动螺纹在体腔外部的闸阀 2-05 旋转杆式闸阀Inside screw nonrising stem type gate valve 阀杆作旋转运动,其传动螺纹在体腔内部的闸阀 2-06 快速启闭闸阀 Quick open-and-close gate valve 阀杆既作旋转又作升降运动的闸阀 2-07 缩口闸阀Contraction cavity gate valve 阀体内的通道直径不同,阀座密封面处的直径小于法兰连接处的直径的闸阀 2-08 平板闸阀Flat gate valve 这种类型的闸阀有带导流孔和不带导流孔之分.带导流孔的平板闸阀能通球清管,不带导流孔的平板闸阀只能用作管路上的启闭装置 3-01 蝶阀 Butterfly valve 启闭件(蝶板)绕固定轴旋转的阀门 3-02 中线蝶阀Center line-type butterfly valve 蝶板的回转中心(即阀门轴中心)位于阀体的中心线和蝶板的密封截面上的蝶阀 3-03 单偏心蝶阀Single-eccentric center butterfly vale 蝶板的回转中心(即阀门轴中心)位于阀体的中心线上且与蝶板密封面形成一个尺寸偏置的蝶阀 3-04 双偏心蝶阀Double-eccentric center butterfly valve 蝶板的回转中心(即阀门轴中心)与蝶板密封截面形成一个尺寸偏置,并与阀体中心线形成另一个尺寸偏置的蝶阀 3-05 三偏心蝶阀Three-eccentric center butterfly valve 蝶板的回转中心(即阀门轴中心)与蝶板密封面形成一个尺寸偏置,并与阀体中心线形成另一个尺寸偏置;阀体密封面中心线与阀座中心线(即阀体中心线)形成一个角偏置的阀门 4-01 旋转阀 Rotary valve 启闭件沿阀座密封曲面轴心作相对旋转运动的阀门 4-02 球阀 Ball valve 启闭件(球体)绕垂直于通路的轴线旋转的阀门 4-03 浮动球阀 Float ball valve 球体不带有固定轴的球阀 4-04 固定球球阀Fixed ball valve 球体带有固定轴的球阀 4-05 弹性球球阀Flexible ball valve 球体上开有弹性糟的球阀 4-06 旋塞阀Cock,plug 启闭件(塞子)绕其轴线旋转的阀门 4-07 紧定式旋塞阀Clampyte plug valve 塞体内不带填料,塞子与塞体密封面的密封依靠拧紧旋塞下面的螺母来实现的旋塞阀 4-08 填料式旋塞阀Cland packing plug valve 采用填料密封的旋塞阀
管件中英文对照表
管件中英文对照表
1.2 管件Fitting 弯头elbow 异径弯头reducing elbow 带支座弯头base elbow k半径弯头long radius elbow 短半径弯头short radius elbow 长半径180°弯头long radius return 短半径180°弯头short radius return 带侧向口的弯头（右向或左向）side outlet elbow (right hand or left hand) 双支管弯头（形）double branch elbow 三通tee 异径三通reducing tee 等径三通straight tee 带侧向口的三通（右向或左向）side outlet tee (right hand or 1eft hand) 异径三通（分支口为异径）reducing tee (reducing on outlet) 异径三通（一个直通口为异径）reducing tee (reducing on one run) 带支座三通base tee 异径三通（一个直通口及分支口为异径）reducing tee (reducing on one run and outlet) 异径三通（两个直通口为异径，双头式）reducing tee (reducing on both runs, bull head) 45°斜三通45° lateral 45°斜三通（支管为异径）45° lateral (reducing on branch) 45°斜三通(一个直通口为异径) 45° lateral (reducing on one run) 45°斜三通(一个直通口及支管为异径) 45° lateral (reducing on one run and branch) Y型三通（俗称裤衩）true “Y” 四通cross 等径四通straight cross 异径四通reducing cross 异径四通（一个分支口为异径）reducing cross (reducing on one outlet) 异径四通（一个直通口及分支口为异径）reducing cross (reducing on one run and outlet) 异径四通（两个分支口为异径）reducing cross (reducing on both outlet) 异径四通（一个直通口及两个分支口为异径）reducing cross (reducing on one run and both outlet) 异径管reducer 同心异径管concentric reducer 偏心异径管eccentric reducer 锻制异径管reducing swage 螺纹支管台threadolet 焊接支管台weldolet