焊接专业词汇
焊接专业词汇-英中对照
weldable adj. 可焊的
weldless adj. 无焊缝的
weldment n. 焊(接)件
double-bevel groove weld 双斜边坡口焊缝, K形坡口焊缝
butt weld 对接焊缝
groove weld 坡口焊
contour weld 特形焊接
automatic spot weld 自动点焊法
explosive weld 爆炸焊接
gas-pressure weld 气压焊
concave fillet weld 凹角焊
downhand weld 平焊缝
carbon arc weld 碳极弧焊
braze welding 硬焊, 铜焊, 钎焊
air-acetylene welding空气-乙炔焊接
argon arc welding 氩弧焊
automatic slag-pool welding 自动电渣焊aircomatic welding 自动调弧氩弧焊, 惰性气体保护金属极弧焊
aluminothermic welding 铸焊, 铝热剂焊接
butt welding 对接焊, 对焊
austenite welding 不锈钢(焊条)焊接
automatic submerged arc welding 自动埋弧焊argon shielded arc welding 氩护电弧焊
weld all around围焊
weld appearance驾吨焊缝外观
welding powder 焊粉
weldable steel可焊钢;焊接钢
weldable copper可焊复合铜板
non-weldable steel不可焊接的钢
high strength weldable aluminium alloy高强度可焊铝合金
weldable可焊的
non-weldable不可焊接的
weldable strain gauge悦焊接式应变计weldbonding粘焊(指电阻点焊与用粘胶粘接相结合的焊接)
welddecay[冶]焊接区晶间腐蚀
welded all around(round)沿周边焊接的lap welded casing搭焊套管
welded aluminum alloy(WAA)焊制铝合金
welded and expansion joint焊接加胀接法
welded and rolled tube joint焊胀
welded armor焊接甲板
welded attachment焊接附件
welded austenitic stainless steel pipe焊接奥氏体不
锈钢钢管
welded bellows焊接波纹管
welded body焊接车身;焊体
welded bond焊接轨隙连接器
welded cap焊接管封头
projection welded cap凸焊帽;有凹凸的焊帽
welded bridge焊接桥, 焊接桥梁
welded casing焊接套管
welded case焊接机匣
helically-welded case螺旋焊接壳体
welded chain焊接链
welded cathode焊接阴极
welded connection焊接合,焊接头,焊接联结
shop-welded connection厂焊接头
welded construction 焊接结构
all-welded construction全焊结构
welded contact rectifier熔接整流器
welded corner joint角焊接
welded crossing焊接断面
welded digester焊接蒸煮锅
welded elbow焊接机械肘, 焊接弯头
welded encapsulation焊接封装
welded ends焊接连接端
welded fin tube焊片式翅片管
welded fissure焊接裂缝,焊合的裂缝, 焊接裂纹
welded fitting焊接式管接头
welded flange焊接法兰;焊接翼缘
manhole with common welded flange平焊法兰人
孔
manhole with butt welded flange对焊法兰人孔
handhole with butt welded flange对焊法兰手孔
welded flat head焊接式平盖
welded frame焊接骨架, 焊接车架, 焊接隔框
tubular welded frame scaffold管状焊接框架式脚手
架
welded frog焊接辙叉
welded gasket焊接垫
tie-in weld管段间焊接
powder weld process粉末焊接法
intermittent fillet weld断续角焊缝
edge weld端接焊缝
tack weld定位焊
backing run; backing weld打底焊道
strapped weld; strapped joint搭板对接焊缝
strength weld承载焊缝
lap fillet welding搭接角焊
overlap welding; lap welding搭接焊
magneticetic pulse welding磁力脉冲焊
flywheel type friction welding; inertia welding储能
摩擦焊
stored energy welding储能焊
percussion welding冲击焊
workshop welding车间焊接
explosive welding爆炸焊接
blasting welding factory爆破焊接厂
welded eye焊眼
welded elbow; welded ell焊接直角弯头
welded nut焊接螺母
welded tank焊接罐
welded pipe焊接管
ratio-frequency welded tube高频焊管
furnace butt-welded pipe对接炉焊管
hammer welded pipe锻焊管
lap welded casing搭焊套管
concave fillet weld凹形角焊缝
automatic spot weld自动点焊法
butt weld对接焊缝
carbon arc weld碳极弧焊
concave fillet weld凹角焊
contour weld特形焊接
double-bevel groove weld双斜边坡口焊缝, K形坡
口焊缝
downhand weld平焊缝
explosive weld爆炸焊接
gas-pressure weld气压焊
groove weld坡口焊
heliarc weld氦弧焊
inert gas carbon-arc weld惰性气体保护碳弧焊接inert gas metal-arc weld惰性气体保护金属极弧焊intermittent weld间断焊缝
lap(seam) weld搭接焊缝; 搭接焊
laser weld激光焊
multiple-electrode submerged arc weld多电极埋弧焊
multiple-pass weld多道焊缝
non-pressure weld熔焊, 不加压焊接
overhead fillet weld仰焊角焊缝
oxyacetylene weld氧[乙]炔焊, 气焊
oxygen weld氧气焊接, 气焊
projection weld凸焊
resonance butt weld谐振式对接焊
scarf weld斜面焊接, 两端搭接焊, 嵌接焊
semi-automatic arc weld半自动电弧焊
shot weld点焊
fusion pressure welding熔化压接
fusion thermit welding熔化铅热焊
gas-electric welding气电联合焊接
gas metal arc welding气体保护金属极电弧焊, 熔化极气体保护焊
gas shielded arc welding气体保护焊, 气体保护弧焊
gas shielded magnetic flux arc welding磁性焊剂气体保护焊
gas torch welding炬焊
gas tungsten arc welding钨电极惰性气体保护焊girth welding环缝焊接
gravity welding重力焊, 重力式电弧焊
hammer welding锻接
hard facing arc welding表面加硬电弧焊
heated-tool welding热烙铁焊接
helium shielded welding氦气保护焊接
hidden arc welding潜弧焊, 埋弧焊high-frequency induction welding高频感应焊接
horizontal fillet welding水平角焊接
horizontal-rolled-position welding滚动水平焊, 水平
转动焊接
hydrogen atomic welding原子氢焊接
induction resistance welding感应电阻焊接
indirect spot welding间接点焊
inert gas shielded-arc welding惰性气体保护焊
inert gas tungsten arc welding钨板惰性气体保护焊
inertial welding惯性焊接
jump welding丁字形焊
keyhole mode plasma arc welding小孔型等离子
弧焊接
lap welding搭焊; 搭头焊接
lap fillet welding搭角焊
light ga(u)ge welding薄板焊接
line welding(电阻)缝焊liquid metal welding熔焊,
浇注补焊
longitudinal seam welding纵缝焊接, 纵向滚焊
(焊缝)
magnetic discharge welding电磁焊
magnetic-force welding磁力焊接法
manual eletro-slag welding手工电渣焊
mash stitch welding多针缝式焊接
match assemble welding装架焊接
metal barie welding埋渣焊
microgap welding微隙间隙焊
micro resistance welding显微电阻焊
mitre welding斜接焊接
multiple-electrode welding多焊条焊接
multiple-impulse welding多脉冲焊
multiple projection welding多点凸焊
multiple resistance welding复式电阻焊
multiple-wire multiple-power submerged-arc
welding多丝埋弧焊
multi-run welding多道焊
narrow gap one side welding窄间隙单面焊
non-gas shielded arc welding无气体保护电弧焊
non-vacuum electron beam welding大气压电子
束焊接
open arc welding明弧焊接
open butt gas pressure welding开式加压气焊
orbit welding环形轨道自动焊接
overhead position welding仰焊
overlap welding搭接焊
overlaying welding堆焊, 补焊
pad welding垫块焊接
parallel gap welding平行间隙焊接, 平行间隙熔
焊
penetration fusion welding深熔焊接
percussion arc pile-up welding振动电弧堆焊
percussive welding锻接
pile-up welding堆焊
pinpoint welding点焊
plasma-MIG welding等离子熔化极气体保护焊
plate electrode slag pool welding板极电渣焊
pressure thermit welding加压铝热焊接
progressive induction seam welding连续感应滚
焊
puddle welding熔焊
pulsation welding脉冲接触焊
pulsed laser welding脉冲激光焊接
push welding手压点焊(接)
quasi-arc welding潜弧自动焊
radio-frequency welding射频焊接, 高频焊接
resistance butt-seam welding电阻对缝焊接
resistance electro-slag welding接触[电阻]电渣焊
resistance-flash welding电阻闪光焊接
resistance seam welding电阻缝焊
resistance spot welding接触点焊
resistance stud welding电阻栓焊
resurfacing welding堆焊
ring welding滚焊
rotating arc welding旋转电弧焊
sandwich welding夹紧冷焊
scarf welding两端搭接焊, 嵌焊, 斜面焊接
self-adjusting [self-regulating] arc welding自动
调节电弧焊
series welding单边多电极焊接, 串焊, 系列焊接series projection welding单边多极凸焊
series seam welding单边双电极焊缝, 单边多极滚焊
series-spot welding单面点焊
shape welding异形焊
shield-arc welding封闭电弧焊, 保护式电弧焊, 气体保护焊
shielded carbon arc welding碳弧保护焊, 气体保护碳极电弧焊
Sigma welding惰性气体保护金属极弧焊, 西格马焊接
single-impulse welding单脉冲焊接
single-pass [run] welding单道焊
skip block welding分段多层跳焊
skys welding间隔焊接
slag pile-up welding电渣堆焊
slant angle type welding低角度式焊接slanting butt seam welding斜对接缝焊
solid-phase (pressure) welding固相压焊
solid-state welding固态焊
special build-up welding特殊堆焊
spin welding旋转熔接
spring type welding弹力式焊接
stack welding多层接触点焊
staggered welding错列焊
staggered-intermittent fillet welding错综式间断角焊
step-by-step welding跨步焊
stitch welding叠焊(法); 跳焊; 针脚点焊(法) stitch-and-seam welding点线焊, 断续焊缝straight bead welding直线焊接
stud welding螺柱焊接
submerged arc welding潜弧焊
submerged slag pool welding埋弧电渣焊接symmetry welding对称焊接
tack welding平头焊接, 点焊
tee spot welding丁字点焊
thermal compression welding热压焊接three o'clock welding横向自动焊
three-phase arc welding三相电弧焊接
tie welding搭接焊
torch welding吹管焊接
torch braze welding焊矩钎焊
track welding轨道焊接
ultrasonic spot welding超声波点焊underside welding仰焊, 顶焊
union melt welding埋弧自动焊
upset butt welding电阻对接焊
vacuum diffusion welding真空扩散焊(接) vertical position welding立焊
water gas welding水煤气焊接
water vapor arc welding水蒸汽保护焊接weaving welding摆动焊
Westing-arc welding惰性气体保护金属板弧焊, 西屋电弧焊
wire welding焊网
常用焊接英语词汇大全
常用焊接英语词汇大全 焊接机器人welding robot 点焊机器人spot welding robot 弧焊机器人arc welding robot 切割机器人cutting robot 焊接机器人生产线robot line for welding 焊接机器人工作站welding robot station 机器人运动自由degree of free for robot 机器人工作空间robot working space 波峰钎焊flow soldering/ wave soldering 分级钎焊step brazing/ step soldering 不等间隙钎焊brazing with the unparalleled clearance 红外线钎焊infra-red brazing (soldering) 光束钎焊light soldering (brazing) 激光钎焊laser brazing (soldering) 电子束钎焊electron beam brazing 钎接焊braze-welding 钎料brazing filler metal/ solder 硬钎料brazing filler metal 软钎料solder (m) 自钎剂钎料self-fluxing brazing alloy/ self-fluxing filler metal 活性钎料active filler metal/ active metal brazing alloy 成形钎料preformed filler metal/ solder preform 非晶态钎料amorphous filler metal 粉状钎料powdered filler metal 钎料膏braze cream/ braze paste/ solder cream/ solder paste 药皮钎料flux coated brazing(soldering)rod 层状钎料sandwich filler metal 药芯钎料丝flux-cored colder wire 敷钎料板clad brazing sheet 钎剂brazing flux; soldering flux 气体钎剂gas flux 反应钎剂reaction flux 松香钎剂colophony flux; rosin flux 钎剂膏flux paste 阻流剂stopping-off agent 钎剂活性flux activity 钎剂活性温度范围activation temperature range of flux 钎剂热稳定性thermal stability of flux 钎焊过程brazing (soldering) process 钎焊操作brazing (soldering) operation
焊接行业术语词汇表格
A A-60 fire door A-60级防火门 a-hundred-year return period 百年一遇abrasive (喷砂用的)磨料abrasive paper 砂纸 AC generator 交流发电机 AC motor 交流电动机 AC welding machine 交流焊机accelerated corrosion testing 加速腐蚀试验acceptance criteria 合格准则 access hole (for welding) = cope hole (焊接)工艺孔accommodation and power platform (APP) 生活动力平台according to = in accordance with = in line with = as per = in the light of 按照 acetylene gas 乙炔 acid electrode 酸性焊条 acid proof cement 防酸水泥additive 添加剂 adhesive agent 粘接剂 adhere to 遵守(动词)adherence to 遵守(名词)adjacent columns 相邻立柱adjustable welding rolling 调校滚轮架 adverse combination of loads 载荷的不利组合adverse condition 不利条件 aeronautical radio system 航空无线电系统 AFC (approved for construction) 建造批准aforementioned 上述的 aft winch 船艉绞车 agitator 搅拌器 air blower 鼓风机 air compressing station 空压站 air compressor 空气压缩机 air driven pump 气动泵 air hoister 气动绞车 air manifold 气包 air tight test 气密性试验 air-hose 风带 aircraft obstruction beacon 航空障碍灯 alarm buzzer 报警蜂鸣器 alarm horn 报警喇叭 aligner 对中器 aliphatic polyurethane 脂肪族聚氨脂漆allowable (working) stress 许用应力 Aluminum alloy anode 铝合金阳极 1
焊接专业术语中英文对照整理
机械——焊接专业术语中英文对照 (郭运)整理 1Single 单面的 2V—groove V型坡口 3Joint 焊接接头 4Edges overlap 接头形式 5Butt 对接 6T T型焊接 7Fillet 角焊缝 8Edge 端接 9Corner 角接 10Radius 半径 11Joint root 焊接根部 12Bevel angle 削边角度 13Groove angle 坡口角度 14Root face 根部钝边 15Groove face 坡口面 16Plug weld 塞焊 17Spot weld 点焊 18Seam weld 缝焊 19Slot weld 槽焊 20Double—flare—bevel—groove K型坡口焊缝
21Single—flare—V 单面V型22Edge flange 翻边端接 23Corner flange 卷边端接 24Flange weld 卷边焊缝25Flare weld 扩口焊缝26Fillet weld 角焊缝 27Slot weld 槽焊缝 28Spot weld 点焊缝 29Surfacing weld 堆焊焊缝30Melt—through weld 熔透焊缝31Backing weld 打底焊缝32Back weld 背面焊缝33Root weld 根部焊缝34Crown weld 隆起部分35Weld reinforcement 焊缝加强36Weld face 焊缝表面37Cap pass 盖面焊道38Weld edge 焊缝边缘39Leg 焊脚 40Toe 焊趾 41Buildup 堆焊 42Weld reinforcement 焊缝加强高
焊接相关中英文词汇及注释
焊接常用中、英文术语定义及解释 1 母材金属base mental, parent mental 被焊金属材料的统称。 2 热影响区heat-affected zone 焊接或切割过程中,材料因受热的影响(但未熔化)而发生金相组织和机械性能变化的区域。 3 过热区overheated zone 焊接热影响区中,具有过热组织或晶粒显著粗大的区域。 4 焊缝weld 焊件经焊接后所形成的结合部分。 5 焊缝区weld zone 焊缝及其邻近区域的总称。 6 定位焊缝tack weld 焊前为装配和固定构件接缝的位置而焊接的短焊缝。 7承载焊缝strength weld 焊件上用作承受载荷的焊缝。 8 连续焊缝continuous weld 连续焊接的焊缝。 9 断续焊缝intermittent weld 焊接成具有一定间隔的焊缝。 10 纵向焊缝longitudinal weld 沿焊件长度方向分布的焊缝。 11 横向焊缝transverse weld 垂直于焊件长度方向的焊缝。 12 环缝girth weld, circumferential weld 沿筒形焊件分布的头尾相接的封闭焊缝。 13 密封焊缝seal weld 主要用于防止流体渗漏的焊缝。 14 并列断续角焊缝chain intermittent fillet weld T形接头两侧互相对称布置、长度基本相等的断续角焊缝。 15 交错断续角焊缝staggered intermittent fillet weld T形接头两侧互相交错布置、长度基本相等的断续角焊缝。 16 凸形角焊缝convex fillet weld 焊缝表面突起的角焊缝。 17 凹形角焊缝concave fillet weld 焊缝表面下凹的角焊缝。 18 焊缝正面face of weld 焊后,从焊件的施焊面所见到的焊缝表面。 19 焊缝背面root su**ce 焊后,从焊件施焊面的背面所见到的焊缝表面。 20 焊缝宽度weld width 焊缝表面两焊趾之间的距离。 21 焊缝厚度actual throat 在焊缝横截面中,从焊缝正面到焊缝背面的距离。 22 焊趾weld toe 焊缝表面与母材的交界处。 23 焊脚fillet weld leg 角焊缝的横截面中,从一个直角面上的焊趾到另一个直角表面的最小距离。 24 熔深depth of fusion 在焊接接头横截面上,母材或前道焊缝熔化的深度。 25 焊缝成形系数form factor(of the weld) 熔焊时,在单道焊缝横截面上焊缝宽度(B)与焊缝计算厚度(H)的比值。 26 余高weld reinforcement 超出母材表面连线上面的那部分焊缝金属的最大高度。 27 工地焊接field welding 焊接结构在工地安装后就地进行的焊接,也称现场焊接。 28 补焊(返修焊)repair welding 为修补工件(铸件、锻件、机械加工件或焊接结构件)的缺陷而进行的焊接。 29 焊接参数welding parameter 焊接时,为保证焊接质量而选定的各项参数(例如,焊接电
焊接专用英文词汇
焊接专用英文词汇 1.1 焊接方法 焊接方法与设备(Welding process& facility) 手工电弧焊(MAW:manual arc welding) 电弧焊(arc welding)埋弧电弧焊(SAW:submerged arc welding)气焊(gas welding)氩弧焊(argon arc welding) 气体保护电弧焊 CO2保护焊(CO2 shielded arc welding) 熔化焊(GMAW—gas metal arc welding) fusion welding 电渣焊(ESW—electroslag welding) 激光焊(LW—laster welding) 等离子焊(PAW—plasma arc welding) 摩擦焊(FRW—friction welding) 焊接压力焊超声波焊(UW—ultrasonic welding) welding pressure welding 冷压焊(CPW—cold pressure welding)锻焊(FW—forge-welding)对焊butt welding 电阻焊(RW—resistance welding) 缝焊seam welding 点焊spot welding 烙铁钎焊 iron soldering 火焰钎焊 torch brazing/ torch soldering 钎焊炉中钎焊 furnace brazing/ furnace soldering soldering/brazing 盐浴钎焊 saltbath dip brazing (soldering) 真空钎焊 vacuum brazing 堆焊 overlaying welding 平焊 downhand welding/flat welding 横焊 horizontal welding 立焊 vertical welding 仰焊 overhead welding 全位置焊 all position welding/positional welding 半自动电弧焊 Semi-automatic arc welding 钨极惰性气体保护电弧焊 (TIG) tungsten inert-gas arc welding 熔化极惰性气体保护电弧焊(MIG)metal inert-gas arc welding 1.2 焊接设备 电弧焊机 arc welding machine 直流弧焊机 DC arc welding machine 交流弧焊机 AC arc welding machine 交直流两用弧焊机 AC/DC arc welding machine 氩弧焊机 argon arc welding machine 二氧化碳弧焊机 CO2 arc welding machine 埋弧焊机 submerged arc welding machine 焊接机头 welding head 行走机构 traveller 送丝机构 wire feeder 焊丝盘 wire reel
焊接英文词汇--有用
焊接英文词汇 BPS---钎接工艺规程 PQR---钎接工艺评定纪录 SWPS---标准焊接工艺规程 WPS---welding procedure specification焊接工艺规程 Hard conversion---近似转换 Soft conversion---精确转换 ASNT---American Society of Nondestructive Testing 美国无损检测学会Arc seam weld---点弧焊焊缝 Arc spot weld---点弧焊点 Arc welding---弧焊 As-brazed---钎接焊 As-welded---焊态 Back gouging---背面清根 Backhand welding---右焊法 Backing---衬垫 Backing gas---背面保护气 Base metal---母材 Bond line—熔合线 Braze---钎接接头 Brazer---钎接工 Brazing, automatic---自动钎接 Brazing, block (BB)---加热块钎接 Brazing, dip (DB)---浸沾钎接 Brazing, furnace (FB)---炉中钎接 Brazing, induction (IB)---感应钎接 Brazing, machine---机动钎接 Brazing, manual---手工钎接 Brazing, resistance (RB)---电阻钎接 Brazing, semiautomatic---半自动钎接 Brazing, torch (TB) ---火焰钎接 Brazing, temperature range---钎接温度范围 Built-up of base metal---母材补焊 Butt joint---对接接头 Buttering---堆焊隔离层 Clad brazing sheet---敷钎料板 Coalescence---接合 Complete fusion---完全熔合 Composite---复合材料 Consumable insert---可熔化嵌条 Contact tube---导电咀 Corner joint---角接接头 Coupon---试件 Crack---裂纹
焊接专业词汇
焊接专业词汇-英中对照 weldable adj. 可焊的 weldless adj. 无焊缝的 weldment n. 焊(接)件 double-bevel groove weld 双斜边坡口焊缝, K形坡口焊缝 butt weld 对接焊缝 groove weld 坡口焊 contour weld 特形焊接 automatic spot weld 自动点焊法 explosive weld 爆炸焊接 gas-pressure weld 气压焊 concave fillet weld 凹角焊 downhand weld 平焊缝 carbon arc weld 碳极弧焊 braze welding 硬焊, 铜焊, 钎焊 air-acetylene welding空气-乙炔焊接 argon arc welding 氩弧焊 automatic slag-pool welding 自动电渣焊aircomatic welding 自动调弧氩弧焊, 惰性气体保护金属极弧焊 aluminothermic welding 铸焊, 铝热剂焊接 butt welding 对接焊, 对焊 austenite welding 不锈钢(焊条)焊接 automatic submerged arc welding 自动埋弧焊argon shielded arc welding 氩护电弧焊 weld all around围焊 weld appearance驾吨焊缝外观 welding powder 焊粉 weldable steel可焊钢;焊接钢 weldable copper可焊复合铜板 non-weldable steel不可焊接的钢 high strength weldable aluminium alloy高强度可焊铝合金 weldable可焊的 non-weldable不可焊接的 weldable strain gauge悦焊接式应变计weldbonding粘焊(指电阻点焊与用粘胶粘接相结合的焊接) welddecay[冶]焊接区晶间腐蚀 welded all around(round)沿周边焊接的lap welded casing搭焊套管 welded aluminum alloy(WAA)焊制铝合金 welded and expansion joint焊接加胀接法 welded and rolled tube joint焊胀 welded armor焊接甲板 welded attachment焊接附件 welded austenitic stainless steel pipe焊接奥氏体不 锈钢钢管 welded bellows焊接波纹管 welded body焊接车身;焊体 welded bond焊接轨隙连接器 welded cap焊接管封头 projection welded cap凸焊帽;有凹凸的焊帽 welded bridge焊接桥, 焊接桥梁 welded casing焊接套管 welded case焊接机匣 helically-welded case螺旋焊接壳体 welded chain焊接链 welded cathode焊接阴极 welded connection焊接合,焊接头,焊接联结 shop-welded connection厂焊接头 welded construction 焊接结构 all-welded construction全焊结构 welded contact rectifier熔接整流器 welded corner joint角焊接 welded crossing焊接断面 welded digester焊接蒸煮锅 welded elbow焊接机械肘, 焊接弯头 welded encapsulation焊接封装 welded ends焊接连接端 welded fin tube焊片式翅片管 welded fissure焊接裂缝,焊合的裂缝, 焊接裂纹 welded fitting焊接式管接头 welded flange焊接法兰;焊接翼缘 manhole with common welded flange平焊法兰人 孔 manhole with butt welded flange对焊法兰人孔 handhole with butt welded flange对焊法兰手孔 welded flat head焊接式平盖 welded frame焊接骨架, 焊接车架, 焊接隔框 tubular welded frame scaffold管状焊接框架式脚手 架 welded frog焊接辙叉 welded gasket焊接垫 tie-in weld管段间焊接 powder weld process粉末焊接法 intermittent fillet weld断续角焊缝 edge weld端接焊缝 tack weld定位焊 backing run; backing weld打底焊道 strapped weld; strapped joint搭板对接焊缝 strength weld承载焊缝 lap fillet welding搭接角焊 overlap welding; lap welding搭接焊 magneticetic pulse welding磁力脉冲焊 flywheel type friction welding; inertia welding储能 摩擦焊 stored energy welding储能焊 percussion welding冲击焊 workshop welding车间焊接 explosive welding爆炸焊接 blasting welding factory爆破焊接厂 welded eye焊眼 welded elbow; welded ell焊接直角弯头 welded nut焊接螺母 welded tank焊接罐 welded pipe焊接管 ratio-frequency welded tube高频焊管 furnace butt-welded pipe对接炉焊管 hammer welded pipe锻焊管 lap welded casing搭焊套管 concave fillet weld凹形角焊缝 automatic spot weld自动点焊法 butt weld对接焊缝 carbon arc weld碳极弧焊 concave fillet weld凹角焊 contour weld特形焊接 double-bevel groove weld双斜边坡口焊缝, K形坡 口焊缝
焊接专业英语词汇(熔化焊)
2006-09-02 | 焊接专业英语词汇(熔化焊) 熔接fusion welding 压接pressure welding 焊接过程welding process 焊接技术welding technique 焊接工艺welding technology/procedure 焊接操作welding operation 焊接顺序welding sequence 焊接方向direction of welding 焊接位置welding position 熔敷顺序build-up sequence deposition sequence 焊缝倾角weld slope/inclination of weld axis 焊缝转角weld rotation/angle of rotation 平焊位置flat position of welding 横焊位置horizontal position of welding 立焊位置vertical position of welding 仰焊位置overhead position of welding 平焊downhand welding/flat position welding 横焊horizontal position welding 立焊vertical position welding 仰焊overhead position welding 全位置焊all position welding:熔焊时,焊件接逢所处空间位置包括平焊、横焊、仰焊等位置所进行的焊接。如水平固定管所进行的环缝焊接 向下立焊vertical down welding/downward welding in the vertical position 向上立焊vertical up welding/upward welding in the vertical position 倾斜焊inclined position welding 上坡焊upward welding in the inclined position 下坡焊downward welding in the inclined position 对接焊butt welding 角焊fillet welding 搭接焊lap welding 船形焊fillet welding in the downhand position/fillet welding in the flat position 平角焊horizontal fillet welding 立角焊fillet welding in the vertical position 仰角焊fillet welding in the overhead position 坡口焊groove welding I形坡口对接焊square butt welding 喇叭形坡口焊flare groove welding 卷边焊flanged edge welding 纵缝焊接welding of longitudinal seam 横缝焊接welding of transverse seam 环缝焊接girth welding/ circumferential
焊接专业英语词汇(通用部分)
焊接专业英语词汇(通用部分) acetylene 乙炔am pere 电流安培 angle welding 角焊arc 电弧 argon arc welding 氩弧焊接bare electrode 光熔接条 butt welding 对接焊接cam ber 电弧弯曲 cascade 阶叠熔接法clad weld 被覆熔接 crator 焊疤excess m etal 多余金属 filler rod 焊条fillet weld 填角焊接 gas shield 气体遮蔽groove welding 起槽熔接 hand face shield 手握面罩hard facing 硬表面堆焊 jig welding 工模焊接laser beam welding 雷射光焊接 metal electrode insert gas welding MIG熔接nugget 点焊熔核overlaying 堆焊peening of welding 珠击熔接法 plug welding 塞孔熔接positioned welding 正向熔接 pressure welding 压焊propane gas cutting 丙烷气切割 pure nickel electrode 纯镍熔接条reinforcem ent of weld 加强焊接resist 抗蚀护膜root running 背面熔接 seam焊缝seaming 接合 seam welding 流缝熔接series seam welding 串联缝熔接 skip welding process 跳焊法spark 火花 spot welding 点焊接stitch welding 针角焊接 stud arc welding 电弧焊接under laying 下部焊层 void 焊接空隙weld flow m ark 焊接流痕 weld flush 焊缝凸起weld line 焊接纹 weld m ark 焊接痕weld penetration 熔接透入 weld zone 焊接区welding 焊接 welding bead 焊接泡welding direction 焊接方向 welding distortion 焊接变形welding flux 焊剂 welding ground 电熔接地welding interval 焊接周期 welding stress 熔接应变welding torch 熔接气炬 welding electrode production line 电焊条生产线 welding electrode 焊条 welding fixture 焊接夹具 welding generator 电焊机 welding goggles 焊工护目镜 welding gun 焊枪 welding helmet 电焊帽 welding inspection ruler 焊接检验尺 welding machine 焊接机 welding mill 焊管机 welding motor generator 电动焊接发电机 welding nozzle 焊嘴 welding paste 焊接药膏
工程焊接英语(整理版)
术语和定义 A Alloy [?l?i] flux [fl?ks] 合金焊剂对焊缝金属合金成分起主要决定作用的焊剂。 all-weld-metal [metl] test specimen [spesim?n] 全焊缝金属试样完全由焊缝金属组成的缩减断面试样。 arc [ɑ:k] gouging [ɡaud?i?] 电弧刨槽用电弧切割方法形成斜面或坡口的热刨槽。 as-welded 焊后状态(焊态)焊后未经任何热处理、力学或化学处理的焊缝金属、焊接接头和焊件的状态。 automatic [?:t?m?tik] welding 自动焊接用设备进行的焊接,焊接中仅需偶然照看或根本无需照看,并且不需手工调节设备的控制。这一术语的变化形式有:自动硬钎焊,自动软钎焊,自动热切割和自动热喷涂。 auxiliary [?:ɡzilj?ri] attachments [?t?t?m?nt] 辅助附件用焊接办法附加于主要的承受应力部件上的部件或附件,这种部件可以或无需承受荷载。 axis [?ksis]of a weld. 焊缝轴线见weld axis。 B backgouging 清根从已焊接头焊缝根部一面清除焊缝金属和母材金属,以便于接着从该面施焊时完全熔合和接头完全熔透。backing 衬垫紧靠接头背面放置的、或者放置在电渣焊和气电焊焊缝两侧的材料或器件,用以承托和保持熔化的焊缝金属。焊接时,这种材料可以部分熔化或者不发生熔化,其材质既可以是金属,也可以是非金属。 backing pass 背部焊道背部焊缝的焊道。 backing ring 衬环环形衬垫,一般用于管材的焊接。 backing weld 打底焊缝焊缝形式的衬垫。 backup weld (tubular[tju:bjul?] structures[str?kt??]) 打底焊道(管结构)仅从一面施焊的接头完全熔透(CJP)坡口焊缝的初始封焊焊道。用作后续焊道的衬垫,但不视为理论焊缝的一部分。 back weld 背部焊缝施焊于单面坡口焊缝背部的焊缝。 base metal 母材被焊接、硬钎焊、软钎焊或切割的金属或合金。 bevel[bev?l] angle[??ɡl] 坡口面角度接头构件的坡口斜面与垂直于构件表面的平面之间的夹角。 box tubing[tju:bi?] 箱形管正方形或矩形横截面的管材产品。见Tubular。 brace intersection[int?sek??n] angle, θ(tubular structure) 支管交角θ(管结构)支管中心线之间形成的锐角。 building code 建筑规范本规范中用到建筑规范这一术语时,指的是本规范适用的建筑法律或规定,或其他的建造条例。当缺少任何当地适用的建筑法律或规定,或其他建造条例时,则建议建造应符合美国钢结构学会(AISC)的建筑用结构钢设计、制作和安装的技术条件。 butt joint
焊接英语词汇
焊接的基本概念知识 ⑴熔化焊接(Fusion welding)手工电弧焊(SMAW:Shielded meta l arc weldi ng)埋弧焊(SAW:Submerged arc welding) 钨极惰性气体保护电弧焊(TIG:Tungsten Inert-Gas arc welding)⑵压力焊接(Pressure welding) 熔化极惰性气体保护电弧焊(MIG:meta l Inert-gas arc welding)爆炸焊(Expl osive welding) 冷压焊(Cold welding)摩擦焊(Friction welding)扩散焊(Diffusion weldin g)焊缝接头(Welded joint) ⑶钎焊(Soldering(软钎焊)/Brazing(硬钎焊))电阻钎焊(resistance brazing) 火焰钎焊(torch brazing/ soldering) 热压焊:hot pressure welding 电渣焊:electroslag welding薄钢板的焊接(We iling of thin steel sheets) 电子束焊:electron beam welding 电阻焊:resistance welding 点焊: Spot w eld 对接接头(Butt joint); 搭接接头(Lap joint);角接接头(Fillet weld)T型接头(T-joint/Tee joint) 最常用的是:对接接头(Butt joint is the most used one)不开坡口的对接接头(Butt joint without groove) 两焊件端面相对平行的接头(The joint whose welding suefaces of both wel ding parts are parallel is called butt joint.) 如果产品在厚度方向上不要求全焊透,可进行单面焊接,应必须保证焊缝的计算厚度H≥0.7δ,δ为板厚。如果要求产品在整个厚度上全部焊透,可在焊缝背面用碳弧气刨清跟后再进行焊接,即形成不开坡口的双面焊接对接接头。(If the product doesn’t need full penetration of welding, we can take single-si de welding, and must make sure that the caculating thickness is more than or equal to 0.7δ(δis the thickness of steel sheets),If full penetration of weld ing needed, we can use carbon arcgouging to back chipping at the back of weld, after which weiding can be taken, than the double-faced welding butt joi nt without groove is formed.)
焊接专业英语词汇(通用部分)
焊接专业英语词汇(通用部分) Fierce welding 满焊焊烧 Symmetry welding 对称焊接 Welding deformation 焊接变形 Seal 封口 Vertical position welding 立焊 Horizontal position welding 横焊 Over-head position welding 仰焊 acetylene 乙炔ampere 电流安培 angle welding 角焊arc 电弧 argon arc welding 氩弧焊接bare electrode 光熔接条butt welding 对接焊接camber 电弧弯曲 cascade 阶叠熔接法clad weld 被覆熔接 crator 焊疤excess metal 多余金属 filler rod 焊条fillet weld 填角焊接 gas shield 气体遮蔽groove welding 起槽熔接 hand face shield 手握面罩hard facing 硬表面堆焊jig welding 工模焊接laser beam welding 雷射光焊接
metal electrode insert gas welding MIG熔接nugget 点焊熔核overlaying 堆焊peening of welding 珠击熔接法 plug welding 塞孔熔接positioned welding 正向熔接 pressure welding 压焊propane gas cutting 丙烷气切割 pure nickel electrode 纯镍熔接条reinforcement of weld 加强焊接resist 抗蚀护膜root running 背面熔接 seam 焊缝seaming 接合 seam welding 流缝熔接series seam welding 串联缝熔接 skip welding process 跳焊法spark 火花 spot welding 点焊接stitch welding 针角焊接 stud arc welding 电弧焊接under laying 下部焊层 void 焊接空隙weld flow mark 焊接流痕 weld flush 焊缝凸起weld line 焊接纹 weld mark 焊接痕weld penetration 熔接透入 weld zone 焊接区welding 焊接 welding bead 焊接泡welding direction 焊接方向 welding distortion 焊接变形welding flux 焊剂 welding ground 电熔接地welding interval 焊接周期 welding stress 熔接应变welding torch 熔接气炬 welding electrode production line 电焊条生产线 welding electrode 焊条 welding fixture 焊接夹具
焊接常用词汇
焊接名词术语 焊接welding 焊接技术welding technique 焊接过程welding process 焊接工艺welding technologe 焊接操作welding operation 焊接顺序welding sequence 焊接方向direction of welding 焊接回路welding circuit 坡口groove 开坡口beveling (of the edge) 单面坡口single groove 双面坡口double groove 坡口面groove face 坡口角度groove angle 坡口面角度bevel angle angle of preparation 接头根部root of joint 根部间隙root gap (root opening) 根部半径root radius (groove radius 钝边root face 接缝joint gap 焊接接头gap joint 接头设计joint design 对接接头butt joint 角接接头cornor joint T形接头T-joint 搭接接头lap joint 十字接头cross shaped joint 端接接头edge joint 卷边接头odge-flange joint 套管接头muff joint(sleeve joint) 斜对接接头scarf butt joint 锁底对接接头lock butt joint 母材base metal (parent metal) 热影响区heat-affected zone 过热区overheated zone 熔合区bond 熔合线bond line(weld junction) 焊接区weld metal area 焊缝区weld metal area 焊缝weld 定位焊缝tack weld 非承载焊缝connective weld
焊接专业英语词汇(钎焊)
焊接专业英语词汇(钎焊) 钎焊 硬钎焊brazing 软钎焊soldering 烙铁钎焊iron soldering 火焰钎焊torch brazing/ torch soldering 热风钎焊hot gas soldering 感应钎焊induction brazing 电阻钎焊resistance brazing 接触反应钎焊contact-reaction brazing 电弧钎焊arc brazing 浸渍钎焊dip brazing/ dip soldering 盐浴钎焊saltbath dip brazing (soldering) 金属浴钎焊molten metal bath dip brazing 炉中钎焊furnace brazing/ furnace soldering 保护气氛钎焊brazing in controlled atmosphere 真空钎焊vacuum brazing 蒸气钎焊vapor phase soldering 超声波钎焊ultrasonic soldering 扩散钎焊diffusion brazing 波峰钎焊flow soldering/ wave soldering 分级钎焊step brazing/ step soldering
红外线钎焊infra-red brazing (soldering) 光束钎焊light soldering (brazing) 激光钎焊laser brazing (soldering) 电子束钎焊electron beam brazing 钎接焊braze-welding 钎料brazing filler metal/ solder 硬钎料brazing filler metal 软钎料solder (m) 自钎剂钎料self-fluxing brazing alloy/ self-fluxing filler met al 活性钎料active filler metal/ active metal brazing alloy 成形钎料preformed filler metal/ solder preform 非晶态钎料amorphous filler metal 粉状钎料powdered filler metal 钎料膏braze cream/ braze paste/ solder cream/ solder p aste 药皮钎料flux coated brazing(soldering)rod 层状钎料sandwich filler metal 药芯钎料丝flux-cored colder wire 敷钎料板clad brazing sheet 钎剂brazing flux; soldering flux 气体钎剂gas flux
焊接术语中英对照
焊接用语中英对照 焊接专业英语词汇(熔化焊) 熔接fusion welding 压接pressure welding 焊接过程welding process 焊接技术welding technique 焊接工艺welding technology/procedure 焊接操作welding operation 焊接顺序welding sequence 焊接方向direction of welding 焊接位置welding position 熔敷顺序build-up sequence deposition sequence 焊缝倾角weld slope/inclination of weld axis 焊缝转角weld rotation/angle of rotation 平焊位置flat position of welding 横焊位置horizontal position of welding 立焊位置vertical position of welding 仰焊位置overhead position of welding 平焊downhand welding/flat position welding 横焊horizontal position welding 立焊vertical position welding 仰焊overhead position welding 全位置焊all position welding:熔焊时,焊件接逢所处空间位置包括平焊、横焊、仰焊等位置所进行的焊接。如水平固定管所进行的环缝焊接 向下立焊vertical down welding/downward welding in the vertical position 向上立焊vertical up welding/upward welding in the vertical position 倾斜焊inclined position welding 上坡焊upward welding in the inclined position 下坡焊downward welding in the inclined position 对接焊butt welding 角焊fillet welding 搭接焊lap welding 船形焊fillet welding in the downhand position/fillet welding in the flat position 平角焊horizontal fillet welding 立角焊fillet welding in the vertical position 仰角焊fillet welding in the overhead position 坡口焊groove welding I形坡口对接焊square butt welding 喇叭形坡口焊 flare groove welding 卷边焊flanged edge welding 纵缝焊接welding of l0ngitudinal seam