地质工程专业英语复习题

一、Definitions：

1、Geological actions

2、Weathering

3、Folds

4、Erosion

5、Site Investigation

6、Aquifer

7、Aquitard

8、Mass Wasting

9、Earthquake

10、Sinkhole

11、geological time

12、joints

13、fault

二、Fillings

1、types of rocks

2、types of geological actions

3、Relative dating methods

4、The classifications of faults

5、The types of ground water

6、The composition of a flow net

7、the types of common mass movements

8、the types of body waves and surface waves

9、the equipments to Measuring Earthquakes

10、the three steps of soil exploration consists.

11、In general, the four stages of a site investigation program.

三、Short Answer Questions

1、Four factors that affect chemical weathering

2、Four typical natural triggers that cause the failure of a slope

3、Four effects of earthquakes

4、Four human triggers that cause the failure of a slope

5、The process of Karst formation

四、Translations

See class assignments

会计专业英语模拟试题及答案

《会计专业英语》模拟试题及答案一、单选题（每题1分，共20分） 1. Which of the following statements about accounting concepts or assumptions are correct? 1）The money measurement assumption is that items in accounts are initially measured at their historical cost. 2）In order to achieve comparability it may sometimes be necessary to override the prudence concept. 3）To facilitate comparisons between different entities it is helpful if accounting policies and changes in them are disclosed. 4）To comply with the law, the legal form of a transaction must always be reflected in financial statements. A 1 and 3 B 1 and 4 C 3 only D 2 and 3 Johnny had receivables of $5 500 at the start of 2010. During the year to 31 Dec 2010 he makes credit sales of $55 000 and receives cash of $46 500 from credit customers. What is the balance on the accounts receivables at 31 Dec 2010? $8 500 Dr $8 500 Cr $14 000 Dr $14 000 Cr Should dividends paid appear on the face of a company’s cash flow statement? Yes No Not sure Either Which of the following inventory valuation methods is likely to lead to the highest figure for closing inventory at a time when prices are dropping? Weighted Average cost First in first out (FIFO) Last in first out (LIFO) Unit cost 5. Which of following items may appear as non-current assets in a company’s the statement of financial position? (1) plant, equipment, and property (2) company car (3) €4000 cash (4) €1000 cheque A. (1), (3) B. (1), (2) C. (2), (3)

专业英语试题及答案私有

广东纺织职业技术学院2010～2011学年第一学期《专业英语》期中考试参考答案一、单词翻译（英译汉） titrimetric 滴定的analysis 分析 reagent 试剂titrant 滴定剂 flask 烧瓶oxidation 氧化 precision 精密度standard solution 标准溶液sodium hydroxide 氢氧化钠Equilibrium constant 平衡常数equilibrium. 平衡manifest 出现，表明equilibrium concentration 平衡浓度frictional flow 有摩擦的流动ionization constant 电离常数correct for 做……的修正molarity 物质的量浓度compressed gas 压缩气体neutralization 中和device 装置，设备plus 正的，加的elevation 海拔，地理高度neutral 中性的positive-displacement 正位移 meter 米，公尺，计，表，仪表 reciprocating 往复的，来回的sodium hydroxide 氢氧化钠piston 活塞 external 外部的(常与to 搭配) centrifugal pump 离心泵，离心抽机 in the absence of 缺乏……时，当……不在时 rotational 转动的，轮流的 at the expense of 归……付费，在损害……的情况下 rotational velocity 旋转速度 compensation 补偿，赔偿stream 溪，川，流，一股，一串，河流 specific 特定的upstream station 上游截面 streamline .流线downstream station 下游截面二、单词翻译（汉译英） normal to surface 垂直于传热面discharge 滤饼卸料 correspondence 符合，一致ceramic 陶器的 momentum 动量，动力，要素filtrate 滤液 momentum transfer 动量传递opening 孔 random motion 随机运动，无规则运动 colloidal particle 胶体微粒 diffused 扩散的configuration 构造，配置 adjacent .邻近的，接近的fluctuation . 波动，起伏 vibrating 振动的，振荡的atm(atmosphere) 大气压(1atm＝ 101. 3 kPa) bulk temperature (远离表面的)流vane (风车、螺旋桨等

土木工程专业英语词汇(整理版)

第一部分必须掌握，第二部分尽量掌握第一部分： 1 Finite Element Method 有限单元法 2 专业英语Specialty English 3 水利工程Hydraulic Engineering 4 土木工程Civil Engineering 5 地下工程Underground Engineering 6 岩土工程Geotechnical Engineering 7 道路工程Road (Highway) Engineering 8 桥梁工程Bridge Engineering 9 隧道工程Tunnel Engineering 10 工程力学Engineering Mechanics 11 交通工程Traffic Engineering 12 港口工程Port Engineering 13 安全性safety 17木结构timber structure 18 砌体结构masonry structure 19 混凝土结构concrete structure 20 钢结构steelstructure 21 钢-混凝土复合结构steel and concrete composite structure 22 素混凝土plain concrete 23 钢筋混凝土reinforced concrete 24 钢筋rebar 25 预应力混凝土pre-stressed concrete 26 静定结构statically determinate structure 27 超静定结构statically indeterminate structure 28 桁架结构truss structure 29 空间网架结构spatial grid structure 30 近海工程offshore engineering 31 静力学statics 32运动学kinematics 33 动力学dynamics 34 简支梁simply supported beam 35 固定支座fixed bearing 36弹性力学elasticity 37 塑性力学plasticity 38 弹塑性力学elaso-plasticity 39 断裂力学fracture Mechanics 40 土力学soil mechanics 41 水力学hydraulics 42 流体力学fluid mechanics 43 固体力学solid mechanics 44 集中力concentrated force 45 压力pressure 46 静水压力hydrostatic pressure 47 均布压力uniform pressure 48 体力body force 49 重力gravity 50 线荷载line load 51 弯矩bending moment 52 torque 扭矩53 应力stress 54 应变stain 55 正应力normal stress 56 剪应力shearing stress 57 主应力principal stress 58 变形deformation 59 内力internal force 60 偏移量挠度deflection 61 settlement 沉降 62 屈曲失稳buckle 63 轴力axial force 64 允许应力allowable stress 65 疲劳分析fatigue analysis 66 梁beam 67 壳shell 68 板plate 69 桥bridge 70 桩pile 71 主动土压力active earth pressure 72 被动土压力passive earth pressure 73 承载力load-bearing capacity 74 水位water Height 75 位移displacement 76 结构力学structural mechanics 77 材料力学material mechanics 78 经纬仪altometer 79 水准仪level 80 学科discipline 81 子学科sub-discipline 82 期刊journal ,periodical 83文献literature 84 ISSN International Standard Serial Number 国际标准刊号 85 ISBN International Standard Book Number 国际标准书号 86 卷volume 87 期number 88 专着monograph 89 会议论文集Proceeding 90 学位论文thesis, dissertation 91 专利patent 92 档案档案室archive 93 国际学术会议conference 94 导师advisor 95 学位论文答辩defense of thesis 96 博士研究生doctorate student 97 研究生postgraduate 98 EI Engineering Index 工程索引 99 SCI Science Citation Index 科学引文索引 100ISTP Index to Science and Technology Proceedings 科学技术会议论文集索引 101 题目title 102 摘要abstract 103 全文full-text 104 参考文献reference 105 联络单位、所属单位affiliation 106 主题词Subject 107 关键字keyword 108 ASCE American Society of Civil Engineers 美国土木工程师协会 109 FHWA Federal Highway Administration 联邦公路总署

地质工程专业英语(DOC)

地质工程专业英语 3 水文地质学原理 3.1 水文地质学科分类 3.1.1 水文地质学hydrogeology 研究地下水的形成和分布、物理及化学性质、运动规律、开发利用和保护的科学。 3.1.2 水文地质学原理(普通水文地质学)principles of hydrogeology(general hydrogeology) 研究水文地质学的基础理论和基本概念的学科。 3.1.3 地下水动力学groundwater dynamics 研究地下水在岩土中运动规律的学科。 3.1.4 水文地球化学hydrogeochemistry 研究地下水化学成分的形成和变化规律以及地下水地球化学作用的学科。 3.1.5 专门水文地质学applied hydrogeology 为各种应用而进行的地下水调查、勘探、评价及开发利用的学科。 3.1.5.1 供水水文地质学water supply hydrogeology 为各种目的供水，研究地下水的形成条件、赋存规律、勘查方法、水质、水量评价以及合理开发利用和管理的学科。 3.1.5.2 矿床水文地质学mine hydrogeology 研究矿床水文地质学理论、勘探方法及开采中有关水文地质问题的学科。 3.1.5.3 土壤改良水文地质学reclamation hydrogeology 研究土壤盐渍化及沼泽化等水文地质问题的学科。 3.1.5.4 环境水文地质学environmental hydrogeology 研究自然环境中地下水与环境及人类活动的相互关系及其作用结果，并对地下水与环境进行保护、控制和改造的学科。 3.1.5.5 同位素水文地质学isotopic hydrogeology

土木工程专业英语

non-destructive test 非破损检验 non-load—bearingwall 非承重墙 non—uniform cross—section beam 变截面粱 non—uniformly distributed strain coefficient of longitudinal tensile reinforcement 纵向受拉钢筋应变不均匀系数 normal concrete 普通混凝土 normal section 正截面 notch and tooth joint 齿连接 number of sampling 抽样数量 O obligue section 斜截面 oblique—angle fillet weld 斜角角焊缝 one—way reinforced(or prestressed)concrete slab “单向板” open web roof truss 空腹屋架， ordinary concrete 普通混凝土(28) ordinary steel bar 普通钢筋(29) orthogonal fillet weld 直角角焊缝(61) outstanding width of flange 翼缘板外伸宽度(57) outstanding width of stiffener 加劲肋外伸宽度(57) over-all stability reduction coefficient of steel beam·钢梁整体稳定系数(58) overlap 焊瘤(62) overturning or slip resistance analysis 抗倾覆、滑移验算(10) P padding plate 垫板(52) partial penetrated butt weld 不焊透对接焊缝(61) partition 非承重墙(7) penetrated butt weld 透焊对接焊缝(60) percentage of reinforcement 配筋率(34) perforated brick 多孔砖(43) pilastered wall 带壁柱墙(42) pit·凹坑(62) pith 髓心(?o) plain concrete structure 素混凝土结构(24) plane hypothesis 平截面假定(32) plane structure 平面结构(11) plane trussed lattice grids 平面桁架系网架(5) plank 板材(65) plastic adaption coefficient of cross—section 截面塑性发展系数(58) plastic design of steel structure 钢结构塑性设计(56) plastic hinge·塑性铰(13) plastlcity coefficient of reinforced concrete member in tensile zone 受拉区混凝土塑性影响系数

岩土工程专业英语考试复习资料

岩土工程专业英语 Fossil化石石灰岩limestone 石英quartz 管涌piping 大地工程geotechnical engineering 反分析法back analysis method 数值岩土力学numerical geomechanics 土力学soil mechanics 岩土工程 geotechnical engineering 应力路径stress path 层理beding 地质年代geological age 断层 fault Normal，reverse 断裂构造fracture structure 花岗岩 granite 滑坡 landslide 节理 joint 喀斯特 Karst 泥石流 "mud flow, debris flow" 砂岩 sandstone 岩爆 rock burst 岩层产状 attitude of rock 岩石构造 structure of rock 岩石结构 texture of rock 岩体 rock mass 页岩 shale 云母 mica 褶皱 "fold, folding" 饱和土 saturated soil 非饱和土 unsaturated soil 膨胀土 "expansive soil, swelling soil" 碎石土 "stone, break stone, broken stone, channery, chat, crushed stone, deritus" 未压密土（台） underconsolidated clay 伊利土 illite 原状土 undisturbed soil 不均匀系数"coefficient of uniformity, uniformity coefficient" 干重度 dry unit weight 塑性指数 plasticity index 含水量"water content, moisture content" 达西定律 Darcy's law 渗流 seepage 渗透力 seepage force 渗透性 permeability 变形 deformation 变形模量 modulus of deformation 泊松比 Poisson's ratio 割线模量 secant modulus 剪胀 dilatation 蠕变 creep 塑性变形 plastic deformation 弹性变形 elastic deformation 有效应力 effective stress 最终沉降 final settlement 巴隆固结理论Barron's consolidation theory 次固结 secondary consolidation 固结 consolidation 残余强度 residual strength 长期强度 long-term strength 单轴抗拉强度uniaxial tension test 峰值强度 peak strength 抗剪强度 shear strength 摩尔－库仑理论Mohr-Coulomb theory 内摩擦角angle of internal friction 粘聚力cohesion 极限平衡状态state of limit equilibrium 临塑荷载critical edge pressure 被动土压力passive earth pressure 静止土压力earth pressure at rest 主动土压力active earth pressure 毕肖普法 Bishop method 条分法slice method 土坡 slope 挡土墙 retaining wall 重力式挡土墙gravity retaining wall 板桩结构sheet pile structure 锚固技术anchoring 管涌piping 基底附加应力net foundation pressure 抗滑桩 anti-slide pile 摩擦桩 friction pile 群桩效应 efficiency of pile groups 复合地基 composite foundation 桩土应力比 stress ratio 地震烈度 earthquake intensity 不固结不排水试验unconsolidated-undrained triaxial test 塑限试验 plastic limit test 液限试验liquid limit test 十字板剪切试验vane shear test 现场渗透试验 field permeability test 原位试验in-situ soil test

(完整版)土木工程专业英语常用词汇

Part IV：Commonly Used Professional Terms of Civil Engineering development organization 建设单位 design organization 设计单位 construction organization 施工单位 reinforced concrete 钢筋混凝土 pile 桩 steel structure 钢结构 aluminium alloy 铝合金 masonry 砌体（工程）reinforced ~ 配筋砌体load-bearing ~ 承重砌体unreinforced ~非配筋砌体 permissible stress (allowable stress) 容许应力plywood 胶合板 retaining wall 挡土墙 finish 装修 finishing material装修材料 ventilation 通风 natural ~ 自然通风 mechanical ~ 机械通风 diaphragm wall (continuous concrete wall) 地下连续墙 villa 别墅 moment of inertia 惯性矩 torque 扭矩 stress 应力normal ~ 法向应力shear ~ 剪应力 strain 应变 age hardening 时效硬化 air-conditioning system空调系统 (air) void ration（土）空隙比 albery壁厨，壁龛 a l mery壁厨，贮藏室 anchorage length锚固长度 antiseismic joint 防震缝 architectural appearance 建筑外观 architectural area 建筑面积 architectural design 建筑设计 fiashing 泛水 workability (placeability) 和易性 safety glass安全玻璃 tempered glass (reinforced glass) 钢化玻璃foamed glass泡沫玻璃 asphalt沥青 felt (malthoid) 油毡 riveted connection 铆接 welding焊接 screwed connection 螺栓连接 oakum 麻刀，麻丝 tee三通管 tap存水弯 esthetics美学 formwork 模板（工程） shoring 支撑 batching 配料 slipform construction (slipforming) 滑模施工 lfit-slab construction 升板法施工 mass concrete 大体积混凝土 terrazzo水磨石 construction joint 施工缝 honeycomb蜂窝，空洞，麻面 piled foundation桩基 deep foundation 深基础 shallow foundation浅基础 foundation depth基础埋深 pad foundation独立基础 strip foundation 条形基础 raft foundation筏基 box foundation箱形基础 BSMT=basement 地下室 lift 电梯electric elevator lift well电梯井 escalator 自动扶梯 Poisson’s ratio 泊松比μ Young’s modulus , modulus of elasticity 杨氏模量，弹性模量E safety coefficient 安全系数 fatigue failure 疲劳破坏 bearing capacity of foundations 地基承载力bearing capacity of a pile 单桩承载力 two-way-reinforcement 双向配筋 reinforced concrete two-way slabs钢筋混凝土双向板 single way slab单向板 window blind 窗帘sun blind wind load 风荷载 curing 养护 watertight concrete 防水混凝土 white cement白水泥 separating of concrete混凝土离折segregation of concrete mortar 砂浆~ joint 灰缝 pilaster 壁柱 fire rating耐火等级 fire brick 耐火砖 standard brick标准砖

地质工程专业英语

1地形地貌geographic and geomorphic 工程地质条件engineering geological conditions 地形地貌条件geographic and geomorphic conditions 地形land form 地貌geomorphology, relief 微地貌microrelief 地貌单元landform unit, geomorphic unit 坡度grade 地形图relief map 河谷river valley 河道river course 河床river bed(channel) 冲沟gully, gulley, erosion gully, stream(brook) 河漫滩floodplain(valley flat) 阶地terrace 冲积平原alluvial plain 三角洲delta 古河道fossil river course, fossil stream channel 冲积扇alluvial fan 洪积扇diluvial fan 坡积裙talus apron 分水岭divide 盆地basin 岩溶地貌karst land feature, karst landform 溶洞solution cave, karst cave 落水洞sinkhole 土洞Karstic earth cave 2地层岩性地层geostrome (stratum, strata) 岩性lithologic character, rock property 岩体rock mass 岩层bed stratum 岩层layer, rock stratum 母岩matrix, parent rock 相变facies change 硬质岩strong rock, film 软质岩weak rock 硬质得petent 软质得inpetent 基岩bedrock 岩组petrofabric 覆盖层overburden 交错层理cross bedding 层面bedding plane 片理schistosity 层理bedding 板理(叶理) foliation 波痕ripple-mark 泥痕mud crack 雨痕raindrop imprints 造岩矿物rock-forming minerals 粘土矿物clay mineral 高岭土kaolinite 蒙脱石montmorillonite 伊利石illite 云母mica 白云母muscovite 黑云母biotite 石英quartz 长石feldspar 正长石orthoclase 斜长石plagioclase 辉石pyroxene, picrite 角闪石hornblende 方解石calcite 构造structure 结构texture 组构fabric(tissue) 矿物组成mineral position 结晶质crystalline 非晶质amorphous 产状attitude 火成岩igneous 岩浆岩magmatic rock 火山岩(熔岩)lava 火山volcano 侵入岩intrusive(invade) rock 喷出岩effusive rock 深成岩plutonic rock 浅成岩pypabysal rock 酸性岩acid rock 中性岩inter-mediate rock 基性岩basic rock 超基性岩ultrabasic rock 岩基rock base (batholith) 岩脉(墙) dike 岩株rock stock 岩流rock flow 岩盖rock laccolith (laccolite) 岩盆rock lopolith 岩墙rock dike 岩床rock sill 岩脉vein dyke

专业英语考试试题与答案

1.Why are cast metal sheet ingots hot-rolled first instead of being cold-rolled? Because of cold rolling is to use hot rolled steel coils as the raw material, after acid pickling to remove oxide skin for cold rolling, the finished product is hard roll, because of cold work hardening caused by deformation of continuous cold rolling hard roll strength, increase hardness, toughness and plastic index decreased, so the stamping performance will deteriorate, can only be used for simple deformation of the parts 2.What type of heat treatment is given to the rolled metal sheet after hot and “warm” rolling? What is its purpose? 轧钢的热处理的类型？轧钢热处理的目的？ Heat treatment of the main types are annealing, normalizing, quenching and tempering, solution treatment and aging treatment, cold treatment, chemical treatment, etc. Annealing： The steel is heated to a certain temperature and heat preservation for a period of time, and then make it slowly cooling, called annealing. Steel annealing is a heat the steel to the phase change or part of the phase change temperature, slow cooling after heat preservation heat treatment method. The purpose of annealing is to eliminate tissue defects, improve the organization make composition uniformity and fine grains, increase mechanical properties of the steel, reduce residual stress; Can decrease the hardness at the same time, improve the plasticity and toughness, improve machinability. So before annealing in order to eliminate and improve both the legacy of tissue defects and internal stress, and to prepare for the follow-up process, so the annealing is belong to the intermediate heat treatment, also called heat treatment in advance Normalizing： Normalizing is heated to above the critical temperature of steel, to all into homogeneous austenitic steel, heat treatment and natural cooling in air. It can eliminate hypereutectoid steel mesh cementite, for hyposteel normalizing can refine crystal lattice, improve comprehensive mechanical properties, low requirements for the parts use the normalized instead of the annealing process is more economic. Quenching: Quenching is the steel is heated to above the critical temperature, heat preservation for a period of time, then quickly into the quenching medium, the temperature plummeted, rapid cooling at greater than the critical cooling rate of speed, which is mainly composed of martensite and unbalanced heat treatment method of the organization. Can increase strength and hardness of the steel quenching, but to reduce its plasticity. That is commonly used in quenching hardening agent are: water, oil, caustic soda, and salt solution, etc

土木工程专业英语考试题集电子教案

精品文档精品文档一单元 [1.4] Hydraulic engineering is concerned with the flow and conveyance of fluids,principally water ．整句的意思是：水利工程主要涉及流体的流动和传输，尤其是水的流动和传输。 [1.5] As construction firms tend to have higher business risk than other types‘of civil engmeenng ． firms ．manY construction engineers tend to take on a role that is more business 。like in nature ：drafiing and reviewing contracts ，evaluating logistical operations ，and cl osely 。monitoring pnces of necessary supplies 。整体的意思是：由于建筑公司比其他类型的民用建筑公司往往承担更高的商业风险，许多建筑工程师往往会本能地扮演一种公事公办的角色：起草和修改合同、评估后勤的运作、严密监控必需供应品的价格等。结构工程 structural engineering 岩土工程 geotechnical engineering 水利工程 hydraulic engineering 海岸工程 coastal engineering 环境工程 environmental engineering 施工工程 construction engineering 6段 Its charter defined civil engineering as the art of directing the great sources of power in nature for the use and convenience of man ,as the means of production and of traffic in states, both for external and internal trade, as applied in the construction of roads, bridges, aqueducts, canals, river nanvigation and docks for internal intercourse and exchang, and in the construction of ports, harbours, moles, breakwaters and lighthouses and in the art of navigation by artificial power for the purposes of commerce, and in the construction and application of machinery, and in the drainage of cities and towns. 把民用工程定义为直接为人类的使用和便利的自然界的伟大力量的来源的艺术，也定义为在各国的生产资料和交通手段，包括外部和内部的贸易，如为内部往来和交易为目的的道路，桥梁，沟渠，运河、航运和码头的建设中的应用，在港口、码头、防浪堤、防波堤和灯塔的建设中的应用，在以商业为目的的人工航运的应用，在建筑和机械以及城镇排水系统中应用的。二单元 [1]In many countries the ratio of concrete consumption to steel consumption exceeds ten to one.在许多国家,水泥消费与钢铁消费的比例已经超过了十比一. [2]Therefore,the selection and proportioning of materials for the concrete mixture was governed primarily by consid eration of the spread of construction by slip-forming and durability of hard ened concrete to the hostil e environment.所以,混凝土材料和配比的选择主要考虑滑模施工速度的影响,以及不利环境中坚硬混凝土耐久性的影响. [3]Depe nding on the components’ transportation cost, in certain geographical locations the price of concrete may be as high as U.S. 75 to $100 per cubic meter, at other it may be as low as U.S. $60 to $70 per cubic meter. 根据材料的运输成本,在某些特定地区,水泥的价格会高达每立方米75至100美元,而在其他地方则会低至每立方米60至70美元. [4]Since an adequate concrete cover on reinforcement or tendons is required for structural integrity in reinforced and prestressed concrete structures, the protection against failure due to excessive heat is provid ed at the same time. 由于在钢筋混凝土和预应力钢筋混凝土结构中,要求有一个足够结实的混凝土封面来确保建筑的一体性,所以,同时还要求必须提供因温度过高而导致失败的保护措施. 三单元 3.1.1 The placement location of the steel reinforcement within the concrete is specified by the concrete cover, which is the clear distance between the surface of the concrete and the reinforcement. 混凝土中加固钢筋的布置要根据混凝土覆盖层的具体情况决定，混凝土覆盖层和加固钢筋之间应保持有条理的间距。 3.1.2To construct concrete structures of even greater structural strength, very high-strength steel such as Grade 270 strands, may be used instead of Grade 60 reinforcement bars. 要建造更为坚固的混凝土结构，就要使用强度非常高的钢筋，例如，要使用270号得加固钢筋，而不是60号得。 3.1.3Therefore,designs that replicate member sizes and simplify reinforcement placement to result in easier and faster construction will usually result in being more economical than a design that achieves minimum material quantities. 因此，那些复制了构件尺寸和简化钢筋位置的设计能促使更容易更快捷的建设，这样的建设通常会比那些只能获得最小量材料的设计显得更经济 3.1.4The final design will generally be conservative even though the analysis does not refl ect the actual nonlinear structural behavior because member design is based on ultimate strength design and the ductility of reinforced concrete enable force redistributions. 最终的设计通常是保守的，即使这种分析没有表现出实际上的非线性结构行为，但因为构件设计是建立在极限强度基础之上，而且钢筋混凝土的延展性又使强度进行了重新分配。力矩： moment 轴力：axial force 剪力：shear force 扭矩：torsion 构件：member 内力：internal force 混凝土隔板：concrete diaphragm 3.3what design criteria is for reinforced concrete ？ Safety 、Aesthetics 、functional requirement 、economy 。第六单元 6-1 The vertical l egs and the horizontal links are themselves frames with large dimensions in the plane of the frame. 垂直支架和水平连接的自身就是在一个平面结构上拥有巨大尺寸的框架结构 6-2 the corner truss legs need strong horizontal connections at frequent modular intervals to make them function together like an equival ent cantil ever 为了使角落桁架支柱的功能等效于等效悬臂，它需要强有力的有频繁模块化间隔的横向连接来保证 6-3 the aerodynamic behaviour was greatly assisted by the apertures which reduced the cross-wind accelerations and forces due to vortex shed ding by as much as 25% 由于涡脱落多达25％从而降低了风切变加速度和力的孔大大增强了空气动力性能。 6-4 this framing resulted from the concept of a tetrahedral framed solid form where all the non-essential el ements were eliminated to create the tube and the external shaping of it 这个框架源于一个四面体框架固体状的概念，这种框架形式的所有的非基本要素被淘汰来创造管与它的外部塑造。第七单元 7.1Design process involves the selection and or detailing of the components that make up the structural system . 设计过程包括组成结构系统元件的选择和细节设计。 7.2Two components of reaction are d eveloped in hinged support and three reaction component , one moment and two forces parallel to horizontal and vertical axis are developed in fixed support . 铰支座产生2中构件反作用力，固定支座能产生3中反作用力，即1个弯矩，以及两种分别与水平轴和纵轴平行的力。 7.3Structural analysis comprises the set of physical laws and mathematics required to study and predict the behavior of structures . The subjects of structural analysis are