AASHTO美国国度公路与运输协会标准

AASHTO 美国国家公路与运输协会标准

AASHTO PMG-1-2001 路面管理指南Pavement Management Guide

AASHTO G MPC-2-2002 指导方法和程序，在合同维修Guide for Methods and Procedures in Contract Maintenance

AASHTO GHOV-3-2004 指南高承载车辆（HOV ）设施Guide for High-Occupancy Vehicle (HOV) Facilities

AASHTO GDPS-4-1993 指南设计路面结构Guide for Design of Pavement Structures

AASHTO GDPS-3 V2-1986 指南设计路面结构第2卷-补充-1 998年Guide for Design of Pavement Structures Volume 2-Supplement - 1998

AASHTO GDHS-5-2004 政策的几何设计的公路和街道-第五版Policy on Geometric Design of Highways and Streets-Fifth Edition

AASHTO GDC-1-2003 准则设计constructibility -a ashto/ n sba钢桥协作-克1 2.1-2003 Guidelines for Design for Constructibility - AASHTO/NSBA Steel Bridge Collaboration-G 12.1-2003 AASHTO GD-2-1965 政策上的几何设计的农村公路-撤回所取代aashto老人科日间医院 A Policy on Geometric Design of Rural Highways-Withdrawn Replaced by AASHTO GDHS

AASHTO GCPE-1996 指南订约，选拔，管理顾问公司在前期工程Guide for Contracting, Selecting, and Managing Consultants in Preconstruction Engineering

AASHTO FRBL-1-2002 交通运输投资在美国-货运铁路的底线报告Transportation Invest in America - Freight-Rail Bottom Line Report

AASHTO FHD-1-2004 指南实现的灵活性，在公路设计 A Guide to Achieving Flexibility in Highway Design

AASHTO FCAH-3-1990 信息指南剑击控制进入高速公路Informational Guide on Fencing Controlled Access Highways

AASHTO ESC-2004 aashto中心环境方面的杰出表现-最佳做法，在竞争的环境管理AASHTO Center for Environmental Excellence - Best Practices in Environmental Stewardship Competition AASHTO EMCP-1992 评价和维修混凝土路面Evaluation and Maintenance of Concrete Pavements

AASHTO DS-2005 一项政策的设计标准号州际公路系统5版 A POLICY ON DESIGN STANDARDS INTERSTATE SYSTEM-Edition 5

AASHTO DIVISION II 11.7-N/A 计量与支付Measurement and Payment

AASHTO DIVISION I 5.14-1996 重力及半重力墙的设计，和悬臂墙设计-中期1997年Gravity and Semi-Gravity Wall Design, and Cantilever Wall Design-Interim 1997

AASHTO DIVISION I 5.13-1996 极限状态，负载因素和阻力因素，1997年中期Limit States, Load Factors and Resistance Factors-Interim 1997

AASHTO DDPG-1-2003 设计图纸介绍指引Design Drawing Presentation Guidelines

AASHTO CSS-1-2005 中心环境方面的杰出表现最佳做法，在上下文敏感的解决方案Center for Environmental Excellence Best Practices in Context-Sensitive Solutions

AASHTO CSD-1-1998 不断变化的状态点The Changing State DOT

AASHTO COMMENTARIES-2002 评标准规格为公路桥梁2002年第十七版Commentaries to Standard Specifications for Highway Bridges 2002-17th Edition

AASHTO CM-4-1990 施工手册公路建设-第四版Construction Manual for Highway

Construction-Fourth Edition

AASHTO CA-3-2006 通勤在美国三-第三次国家报告对通勤的格局和趋势Commuting In America III - The Third National Report On Commuting Patterns and Trends

AASHTO BPCSS-2006 a ashto中心环境方面的杰出表现-最佳做法，在上下文敏感的解决方案AASHTO Center for Environmental Excellence - Best Practices in Context-Sensitive Solutions AASHTO AU-5-2005 一政策对住宿的水电费与高速公路右侧的双向 A Policy On the Accommodation of Utilities Within Freeway Right-Of-Way

AASHTO APPENDICES-2002 附录标准规格为公路桥梁2002年第十七版Appendices to Standard Specifications for Highway Bridges 2002-17th Edition

AASHTO APH-1-2005 合作伙伴手册Partnering Handbook

AASHTO APD-1-2005 加快项目交付。其约时间Accelerating project delivery. Its about time AASHTO UAAG-2005 统一审计与会计指南UNIFORM AUDIT & ACCOUNTING GUIDE

AASHTO TP 69-2004 的标准方法测试散装具体的严重性和压实密度的沥青混合料使用自动

真空密封的方法-美国ASTM指定 d ：6752 - 02a Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method-

ASTM Designation D: 6752-02a

AASHTO TP 67-2006 标准方法的测试分析结构钢涂料的异氰酸酯内容Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content

AASHTO TP 66-2006 标准方法的测试分析结构钢涂料受阻胺光稳定剂（HAL中）Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS) AASHTO TP 65-2003 标准方法测试非仪器测定金属锌在富锌底漆Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers

AASHTO TP 63-2003 的标准方法测试确定车辙易感性的沥青铺路混合物使用沥青路面分析

仪（演艺学院）Standard Method of Test for Determining Rutting Susceptibility of Asphalt Paving Mixtures Using the Asphalt Pavement Analyzer (APA)

AASHTO TP 62-2003 标准方法测试确定动态模量的热拌沥青混凝土混合物Standard Method of Test for Determining Dynamic Modulus of Hot-Mix Asphalt Concrete Mixtures

AASHTO TP 61-2002 标准方法测试确定的百分比骨折的粗骨料Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate

AASHTO TP 60-2000 标准方法试验的热膨胀系数液压水泥混凝土Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete

AASHTO TP 57-2006 标准方法测试为定性检测有害粘土的蒙脱石组在总量的使用亚甲蓝Standard Method of Test for The Qualitative Detection of Harmful Clays of the Smectite Group in Aggregates Using Methylene Blue

AASHTO T F-38-1998 专责小组38报告;报告对冷再生沥青混凝土路面Task Force 38 Report; Report on Cold Recycling of Asphalt Pavements

AASHTO TF-37-1999 专责小组37报告-引导规范喷浆维修o fhighway的桥梁TASK FORCE 37 REPORT - GUIDE SPECIFICATION FOR SHOTCRETE REPAIR OFHIGHWAY BRIDGES

AASHTO TF-32-1992 小组委员会就新的公路材料专责小组32报告手册，腐蚀与防护的混凝

土构件在桥梁Subcommittee on New Highway Materials Task Force 32 Report Manual for Corrosion Protection of Concrete Components in Bridges

AASHTO TF-31-1992 小组委员会就新的公路材料专责小组31日的报告指南规格聚合物改性

沥青Subcommittee on New Highway Materials Task Force 31 Report Guide Specifications Polymer Modified Asphalt

AASHTO TF-30-1990 小组委员会就新的公路材料专责小组30日的报告（分为两部分）“指

Subcommittee on New Highway Materials Task 南的规格，混凝土重叠的行人路及桥面板的”　

Force 30 Report (In Two Parts) "Guide Specifications for Concrete Overlays of Pavements and Bridge Decks"

AASHTO TF-25-1990 小组委员会就新的公路材料专责小组25日的报告指南的规格和测试程序，土工布Subcommittee on New Highway Materials Task Force 25 Report Guide Specifications and Test Procedures for Geotextiles

AASHTO TF-22-1990 小组委员会就新的公路材料专责小组22日报告“两岸参考排水管规格，

Subcommittee on New Highway Materials Task Force 22 水路，机场，铁路，过境国和公路”　

Report "Cross-Reference for Drainage Pipe Specifications for Waterways, Airports, Railroads, Transit and Highways"

AASHTO TF-13-1998 小组委员会就新的公路材料专责小组13日的报告;指南小签署支持硬件Subcommittee on New Highway Materials Task Force 13 Report; A Guide to Small Sign Support Hardware

AASHTO TC-1-2001 茶叶的挑战，一路领先- TEA Challenge - Leading the Way

AASHTO T 166-2005 标准方法测试散装具体的严重性，压实沥青混合料使用饱和面干标本Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens

AASHTO T 27-2006 的标准方法试验筛分析罚款及粗集料- ASTM标准的指定中： C 136-05 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates-ASTM Designation: C 136-05

AASHTO T 329-2005 标准方法检验水分含量沥青混合料（人道主义排雷）烤箱法Standard Method of Test for Moisture Content of Hot-Mix Asphalt (HMA) by Oven Method

AASHTO T 326-2005 标准方法测试未压缩无效的内容，粗骨料（如受颗粒形状，表面纹理，

和分级）Standard Method of Test for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape, Surface Texture, and Grading)

AASHTO T 325-2004 标准的方法，测试估计混凝土强度在交通建设由muturity测试Standard Method of Test for Estimating the Strength of Concrete in Transportation Construction

by Muturity Tests

AASHTO T 323-2003 标准方法试验确定的抗剪强度在界面粘结层的波特兰水泥混凝土Standard Method of Test for Determining the Shear Strength at the Interface of Bonded Layers of Portland Cement Concrete

AASHTO T 321-2003 标准方法测试确定疲劳寿命的压实沥青混合料（mha ）受到反复弯曲

弯曲Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (MHA) Subjected to Repeated Flexural Bending

AASHTO T 320-2003 标准方法测试确定永久剪应变和刚度的沥青混合料的使用Superpave的剪切测试仪（海温）Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures using the Superpave Shear Tester (SST)

AASHTO T 318-2002 标准方法测试水的内容，新鲜预拌混凝土使用微波炉干燥Standard Method of Test for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying AASHTO T 317-2004 标准方法测试预测沥青铺装层的约束温度Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures

AASHTO T 315-2006 标准方法测试确定流变学特性的沥青结合料使用动态剪切流变仪（的

DSR ）Standard Method of Test for Determining the Rheological Properties of Asphalt Binder

Using a Dynamic Shear Rheometer (DSR)

AASHTO T 311-2000 标准方法测试粒度分析土壤颗粒材料Standard Method of Test for Grain-Size Analysis of Granular Soil Materials

AASHTO T 309M/T 309-2006 的标准方法测试温度的新鲜混合液压水泥混凝土- ASTM标准的指定中： C 1064 /炭一千○六十四米- 05 Standard Method of Test for Temperature of Freshly Mixed Hydraulic- Cement Concrete-ASTM Designation: C 1064/C 1064M-05

AASHTO T 307-1999 标准方法测试确定回弹模量的土壤和总结材料Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials

AASHTO T 304-1996 标准方法测试未压缩无效的内容，细骨料Standard Method of Test for Uncompacted Void Content of Fine Aggregate

AASHTO T 303-2000 标准方法测试，为加快检测潜在的有害扩大迫击炮酒吧由于碱硅酸反

应Standard Method of Test for Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction

AASHTO T 301-1999 标准方法试验的弹性恢复测试沥青材料是指一个ductilometer Standard Method of Test for Elastic Recovery Test of Bituminous Materials by Means of a Ductilometer AASHTO T 300-2000 的标准方法测试，为部队的延性试验沥青材料Standard Method of Test for Force Ductility Test of Asphalt Materials

AASHTO T 297-1994 标准的方法，测试的综合，不排水三轴压缩试验对土壤的凝聚力- ASTM标准： d 4767 - 88e1 Standard Method of Test for Consolidated, Undrained Triaxial Compression Test on Cohesive Soils-ASTM Designation: D 4767-88e1

AASHTO T 295-2002 标准方法试验的具体重力或空气污染指数的严重性，液体沥青由hydrometer方法-陛下- 22 ;第IIA部; ASTM标准指定 d 3142-97 Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method-HM-22; Part IIA; ASTM Designation D 3142-97

AASHTO T 290-1995 标准方法测试定水溶性硫酸离子含量的土壤Standard Method of Test for Determining Water-Soluble Sulfate Ion Content in Soil

AASHTO T 289-1991 标准方法测试确定的pH值的土壤，使用在腐蚀测试Standard Method of Test for Determining pH of Soil for Use in Corrosion Testing

AASHTO T 283-2003 的标准方法测试阻力压实沥青混合料的水分，以诱导的损害Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage AASHTO T 282-2001 标准方法测试校准车轮武力或转矩传感器使用标定平台-美国ASTM指定：电子556-00 Standard Method of Test for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform-ASTM Designation: E 556-00

AASHTO T 280-2006 标准方法测试混凝土管，沙井路段，或瓷砖- ASTM标准的指定中： C 497-04 Standard Method of Test for Concrete Pipe, Manhole Sections, or Tile-ASTM Designation:

C 497-04

AASHTO T 279-1996 标准方法测试，为加快抛光料使用英国轮陛下- 22 ;第IIA部; ASTM标准指定 d 3319-90 Standard Method of Test for Accelerated Polishing of Aggregates Using the British Wheel-HM-22; Part IIA; ASTM Designation D 3319-90

AASHTO T 277-2005 标准方法测试电动说明具体的硫能力抵御氯离子渗透性- ASTM标准的指定中： C 1202年至1294年Standard Method of Test for Electrical Indication of Concrete s Ability to Resist Chloride Ion Penetration-ASTM Designation: C 1202-94

AASHTO T 275-1991 标准方法测试批量具体的严重性，压实沥青混合料用石蜡包裹标本Standard Method of Tests for Bulk Specific Gravity of Compacted Bituminous Mixtures Using

Paraffin-Coated Specimens

AASHTO T 273-1986 标准的方法，测试土壤吸力Standard Method of Test for Soil Suction AASHTO T 272-2004 标准方法测试曲线族-一点法Standard Method of Test for Family of Curves - One-Point Method

AASHTO T 269-1997 标准方法测试％空隙率在压实密度和开放的沥青铺路混合物-美国ASTM指定 d 3203-94 （2000 ）Standard Method of Test for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures-ASTM Designation D 3203-94 (2000) AASHTO T 265-1993 的标准方法测试实验室测定水分含量的土壤Standard Method of Test for Laboratory Determination of Moisture Content of Soils

AASHTO T 260-1997 的标准方法检验的采样和测试，为氯离子在混凝土和混凝土原材料Standard Method of Test for Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials

AASHTO T 259-2002 的标准方法测试阻力的混凝土氯离子渗透性-陛下- 22 ;的一部分，第IIB Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration-HM-22; PART IIB AASHTO T 258-1981 标准方法测试确定膨胀土Standard Method of Test for Determining Expansive Soils

AASHTO T 256-2001 标准方法测试路面弯沉测量-重介- 22 ;的一部分，第IIB Standard Method of Test for Pavement Deflection Measurements-HM-22; PART IIB

AASHTO T 249-2003 标准方法测试锁定煤层螺旋波纹管Standard Method of Test for Helical Lock Seam Corrugated Pipe

AASHTO T 248-2002 标准方法测试，减少样本的总测试大小ASTM标准的指定中： C 702-98 （2003 ）Standard Method of Test for Reducing Samples of Aggregate to Testing Size-ASTM Designation: C 702-98 (2003)

AASHTO T 246-1993 标准方法测试变形抗力和凝聚力，沥青混合料的方式hveem仪器-美国ASTM指定d1560 - 81 Standard Method of Test for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus-ASTM Designation D1560-81

AASHTO T 244-2006 标准方法测试力学性能测试的钢铁产品-美国ASTM指定 1 370-05 Standard Method of Test for Mechanical Testing of Steel Products-ASTM Designation A 370-05 AASHTO T 243M/T 243-2006 的标准方法测试采样程序的影响，测试结构钢- ASTM标准指定一673 /一六百七十三米- 05 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel-ASTM Designation A 673/A 673M-05

AASHTO T 242-1996 标准方法测试摩擦性能铺平了表面使用全尺寸轮胎ASTM标准指定：电子274-97 Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire-ASTM Designation: E 274-97

AASHTO T 241-1995 标准方法试验，不断螺旋焊缝波纹钢管Standard Method of Test for Helical Continuously Welded Seam Corrugated Steel Pipe

AASHTO T 231-2005 标准方法测试上限筒混凝土标本-美国ASTM指定 c 617-98 （2003 ）Standard Method of Test for Capping Cylindrical Concrete Specimens-ASTM Designation C 617-

98 (2003)

AASHTO T 223-1996 标准方法测试领域的叶片剪切试验在粘性土Standard Method of Test for Field Vane Shear Test in Cohesive Soil

AASHTO T 222-1981 的标准方法测试nonrepetitive静态载荷试验的土壤和柔性路面组件，

用于在评价和设计的机场和公路的行人路Standard Method of Test for Nonrepetitive Static Plate Load Test of Soils and Flexible Pavement Components, for Use in Evaluation and Design of

Airport and Highway Pavements

AASHTO T 219-1987 标准的测试方法进行测试，石灰的化学成分和颗粒大小Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes

AASHTO T 218-1986 标准方法测试取样熟石灰Standard Method of Test for Sampling Hydrated Lime

AASHTO T 216-2003 标准方法测试的一维固结性能的土壤-美国ASTM指定 d 2435-90 Standard Method of Test for One-Dimensional Consolidation Properties of Soils-ASTM Designation D 2435-90

AASHTO T 215-1970 标准方法测试渗透土壤颗粒（不断头）-美国ASTM 2434-68 （1994 ）素E1 Standard Method of Test for Permeability of Granular Soils (Constant Head)-ASTM 2434-68(1994)E1

AASHTO T 210-2005 标准方法试验总结耐久性指数ASTM标准指定 d 3744-03 Standard Method of Test for Aggregate Durability Index-ASTM Designation D 3744-03

AASHTO T 208-2005 标准方法测试无侧限抗压强度粘性土-美国ASTM指定 d 2166-00 Standard Method of Test for Unconfined Compressive Strength of Cohesive Soil-ASTM Designation D 2166-00

AASHTO T 200-1979 标准方法测试pH值的水溶液中，与玻璃电极-美国ASTM指定 e 70-97 Standard Method of Test for pH of Aqueous Solutions with the Glass Electrode-ASTM Designation E 70-97

AASHTO T 199-2000 标准方法测试空气新鲜的内容，预拌混凝土由chace指标Standard Method of Test for Air Content of Freshly Mixed Concrete by the Chace Indicator

AASHTO T 198-2002 标准方法测试劈拉强度的混凝土圆柱标本-陛下- 22 ;第IIA部; ASTM标准指定 c 496-96 Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens-HM-22; Part IIA; ASTM Designation C 496-96

AASHTO T 197M/T 197-2005 标准的方法，测试的时间设定具体的混合物贯入阻力-美国ASTM指定的ASTM标准 c 403 /炭四百〇三米- 99 Standard Method of Test for Time of Setting

of Concrete Mixtures by Penetration Resistance-ASTM Designation ASTM C 403/C 403M-99 AASHTO T 195-1967 标准方法测试定程度的颗粒包覆沥青骨料的混合物-美国ASTM d2489 - 67 （1980 ）Standard Method of Test for Determining Degree of Particle Coating of Bituminous-Aggregate Mixtures-ASTM D2489-67(1980)

AASHTO T 194-1997 标准方法试验测定中有机质的土壤湿燃烧Standard Method of Test for Determination of Organic Matter in Soils by Wet Combustion

AASHTO T 193-1999 标准方法测试，为加州承载比Standard Method of Test for the California Bearing Ratio

AASHTO T 188-2005 标准的方法，测试评价，冻结和解冻的空气- entraining加液压水泥Standard Method of Test for Evaluation by Freezing and Thawing of Air-Entraining Additions to Hydraulic Cement

AASHTO T 186-2006 标准方法试验的早期僵硬液压水泥（粘贴的方法）- ASTM标准的指定中： C 451 - 04a Standard Method of Test for Early Stiffening of Hydraulic Cement (Paste Method)-ASTM Designation: C 451-04a

AASHTO T 185-2006 标准方法试验的早期僵硬液压水泥（砂浆法）ASTM标准的指定中：

C 359-04 Standard Method of Test for Early Stiffening of Hydraulic Cement (Mortar Method)-ASTM Designation: C 359-04

AASHTO T 179-2005 标准方法测试，换热效果和空气对沥青材料（采用薄膜烘箱试验）

ASTM标准： d 1754年至1797年（2002 ）Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test)-ASTM Designation: D 1754-97 (2002)

AASHTO T 177-2003 标准方法测试抗弯强度的混凝土（使用简支梁与中心点加载）- ASTM 标准的指定中： C 293-02 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)-ASTM Designation: C 293-02

AASHTO T 176-2002 标准方法测试塑料的罚款额，分级碎石和土壤中使用的砂当量试验陛

下- 22 ;第IIA部Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test-HM-22; Part IIA

AASHTO T 168-2003 标准方法测试取样沥青铺路混合物- ASTM标准： d 979-01 Standard Method of Test for Sampling Bituminous Paving Mixtures-ASTM Designation: D 979-01

AASHTO T 167-2005 标准方法测试抗压强度的沥青混合料Standard Method of Test for Compressive Strength of Hot-Mix Asphalt

AASHTO T 165-2002 标准方法试验的影响水对中华民族的凝聚力压实沥青混合料-陛下- 22 ;第IIA部; ASTM标准： d 1075年至1096年Standard Method of Test for Effect of Water on Cohesion of Compacted Bituminous Mixtures-HM-22; Part IIA; ASTM Designation: D 1075-96 AASHTO T 162-2004 标准方法测试机械搅拌液压水泥浆体和迫击炮的塑胶一致性ASTM标准的指定中： C 305 - 99e1 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency-ASTM Designation: C 305-99e1

AASHTO T 158-2005 标准方法测试出血的混凝土ASTM标准的指定中： C 232-99 Standard Method of Test for Bleeding of Concrete-ASTM Designation: C 232-99

AASHTO T 157-2006 标准方法测试空气- entraining外加剂混凝土ASTM标准的指定中： C 233-04 Standard Method of Test for Air-Entraining Admixtures for Concrete-ASTM Designation: C 233-04

AASHTO T 152-2005 标准方法测试空气新鲜的内容，预拌混凝土，由压力的方法- ASTM标准的指定中： C 231-03 Standard Method of Test for Air Content of Freshly Mixed Concrete by

the Pressure Method-ASTM Designation: C 231-03

AASHTO T 146-1996 标准方法测试湿法制备不安的土壤样品进行化验，Standard Method of Test for Wet Preparation of Disturbed Soil Samples for Test

AASHTO T 141-2005 标准方法测试取样新鲜预拌混凝土- ASTM标准的指定中： C 172-04 Standard Method of Test for Sampling Freshly Mixed Concrete-ASTM Designation: C 172-04 AASHTO T 137-2004 标准方法测试空气的内容，液压水泥砂浆- ASTM标准的指定中： C 185-02 Standard Method of Test for Air Content of Hydraulic Cement Mortar-ASTM Designation:

C 185-02

AASHTO T 129-2006 标准方法测试正常的一致性，液压水泥ASTM标准的指定中： C 187-04 Standard Method of Test for Normal Consistency of Hydraulic Cement-ASTM Designation: C

187-04

AASHTO T 128-1997 标准方法测试细液压水泥由150 -嗯（第100号）和75 -嗯（第200号）分子筛-陛下- 22 ;第IIA部; ASTM标准的指定中： C 184-94 Standard Method of Test for Fineness of Hydraulic Cement by the 150-um (No. 100) and 75-um (No. 200) Sieves-HM-22; Part IIA; ASTM Designation: C 184-94

AASHTO T 127-2004 标准方法测试取样和测试的数额液压水泥ASTM标准的指定中： C 183-02 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement-ASTM Designation: C 183-02

AASHTO T 121M/T 121-2005 标准方法测试密度（单位重量），产量，和空气含量（重量）

混凝土ASTM标准的指定中： C 138 /炭一百三十八米- 01a Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete-ASTM Designation: C 138/C 138M-01a

AASHTO T 112-2000 标准方法测试粘土肿块和易碎颗粒在总结- ASTM标准的指定中： C 142-97 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate-ASTM Designation: C 142-97

AASHTO T 110-2003 标准方法测试水分或挥发馏分在沥青铺路混合物- ASTM标准： d 1461年至1485年Standard Method of Test for Moisture or Volatile Distillates in Bituminous Paving Mixtures-ASTM Designation: D 1461-85

AASHTO T 106M/T 106-2004 标准方法测试抗压强度的液压水泥砂浆（用50毫米或 2 -在。立方体标本）-美国ASTM指定 c 109 /炭一〇九米- 02 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)-ASTM Designation C 109/C 109M-02

AASHTO T 105-2006 标准方法测试进行化学分析的液压水泥ASTM标准的指定中： C 114-05 Standard Method of Test for Chemical Analysis of Hydraulic Cement-ASTM Designation: C 114-05

AASHTO T 104-1999 标准方法试验的稳健性总结用硫酸钠或硫酸镁Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate

AASHTO T 103-1991 标准方法试验的稳健料冻结及解冻Standard Method of Test for Soundness of Aggregates by Freezing and Thawing

AASHTO T 89-2002 标准方法测试定液限土-陛下- 22 ;第IIA部Standard Method of Test for Determining the Liquid Limit of Soils-HM-22; Part IIA

AASHTO T 88-2000 标准方法测试粒度分析土壤Standard Method of Test for Particle Size Analysis of Soils

AASHTO T 85-1991 标准的方法，测试的具体的严重性和吸收粗骨料- ASTM标准的指定中：

C 127-88 （1993 ）Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate-ASTM Designation: C 127-88 (1993)

AASHTO T 80-2006 标准方法测试洛氏硬度和表面洛氏硬度的金属材料ASTM标准指定：电子18-05 Standard Method of Test for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials-ASTM Designation: E 18-05

AASHTO T 79-1996 标准方法测试闪点与标记开放式杯器具使用的材料有闪光不少于93.3摄氏（华氏200 ）Standard Method of Test for Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Less Than 93.3 Celsius (200 Fahrenheit)

AASHTO T 72-1997 标准方法测试Saybolt的粘度-陛下- 22 ;第IIA部; ASTM标准指定 d 88-94段（1999 ）Standard Method of Test for Saybolt Viscosity-HM-22; Part IIA; ASTM Designation D 88-94(1999)

AASHTO T 70-2006 标准方法测试布氏硬度的金属材料ASTM标准指定：电子商务10月1日Standard Method of Test for Brinell Hardness of Metallic Materials-ASTM Designation: E 10-

01

AASHTO T 68M-2005 标准方法测试拉伸试验金属材料[公制] -美国ASTM指定：电子8米-

04 Standard Method of Test for Tension Testing of Metallic Materials [Metric]-ASTM Designation:

E 8M-04

AASHTO T 68-2005 标准方法测试拉伸试验的金属材料ASTM标准指定：电子8月4日Standard Method of Test for Tension Testing of Metallic Materials-ASTM Designation: E 8-04

AASHTO T 53-2006 标准的方法，测试软化点沥青（环和球器具）- ASTM标准： d 36-95 （2000 ）素E1 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)-ASTM Designation: D 36-95 (2000)e1

AASHTO T 49-2006 标准方法测试渗透沥青材料ASTM标准： d 5 - 05a Standard Method of Test for Penetration of Bituminous Materials-ASTM Designation: D 5-05a

AASHTO T 44-2003 标准方法试验的溶解度沥青材料ASTM标准指定 d 2042-01 Standard Method of Test for Solubility of Bituminous Materials-ASTM Designation D 2042-01

AASHTO T 40-2002 标准方法测试取样沥青材料陛下- 22 ;第IIA部; ASTM标准指定 d 140-00 Standard Method of Test for Sampling Bituminous Materials-HM-22; Part IIA; ASTM Designation

D 140-00

AASHTO T 32-2005 标准方法检验的采样和测试砖混ASTM标准的指定中： C 67 - 03a Standard Method of Test for Sampling and Testing Brick-ASTM Designation: C 67-03a

AASHTO T 26-1979 标准方法测试水的质量，以便用于混凝土Standard Method of Test for Quality of Water to Be Used in Concrete

AASHTO T 24-2005 标准方法测试获取和测试钻孔岩心和sawed梁混凝土ASTM标准的指定中： C 42-04 Standard Method of Test for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete-ASTM Designation: C 42-04

AASHTO T 22-2006 标准方法测试抗压强度筒混凝土标本- ASTM标准的指定中： C 39 - 04a Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens-ASTM Designation: C 39-04a

AASHTO T 21-2005 标准方法测试有机杂质在精细总量混凝土ASTM标准的指定中： C 40-04 Standard Method of Test for Organic Impurities in Fine Aggregates for Concrete-ASTM Designation: C 40-04

AASHTO T 19M/T 19-2000 标准方法测试容重（单位重量）和空隙在总结- ASTM标准的指定中： C 29 /炭二十九米- 97 （2003 ）Standard Method of Test for Bulk Density ( Unit Weight ) and Voids in Aggregate-ASTM Designation: C 29/C 29M-97 (2003)

AASHTO T 2-1991 标准方法测试取样的总量-陛下- 22 ;第IIA部; ASTM标准指定 d 75-87 （1992 ）素E1 Standard Method of Test for Sampling of Aggregates-HM-22; Part IIA; ASTM Designation D 75-87(1992)E1

AASHTO SSLF-2003 美国国家公路安全论坛;诉讼National Highway Safety Forum; Proceedings AASHTO SR-3-1997 公路安全设计与操作指南Highway Safety Design and Operations Guide AASHTO SP-1-2005 2005-2010年战略计划是aashto的声音，为运输和催化剂的组织和技术

卓越。STRATEGIC PLAN 2005-2010 AASHTO i s the voice for transportation and catalyst for organizational and technical excellence.

AASHTO SMC-2-2004 最佳做法在智能交通运输的增长和2004年的竞争Best Practices in Smart Growth and Transportation 2004 COMPETITION

AASHTO SMC-1-2002 聪明的举动：交通运输战略的智能增长，2002年竞争SMART MOVES: TRANSPORTATION STRATEGIES FOR SMART GROWTH 2002 COMPETITION AASHTO SLWD-1991 指南规格的设计应力层压木质甲板Guide Specifications for the Design of Stress-Laminated Wood Decks

AASHTO SDMS-1-2000 aashto sdms技术数据指南2000年运输工程数据交换和存档AASHTO SDMS Technical Data Guide 2000 for Transportation Engineering Data Exchange and Archive AASHTO SDDP-1-2002 店详图介绍指引Shop Detail Drawing Presentation Guidelines

AASHTO SBFQC-1-2002 钢桥制造质量控制/质量保证指南规格Steel Bridge Fabrication QC/QA

Guide Specification

AASHTO SBF-1-2002 钢桥制造规范指南Steel Bridge Fabrication Guide Specification

AASHTO RSDG CHAPTER 6-2006 路边设计指南第六章更新Roadside Design Guide Chapter Six Update

AASHTO R 40-2005 标准做法，测量路面的个人资料使用控制棒和水平Standard Practice for Measuring Pavement Profile Using a Rod and Level

AASHTO R 35-2004 标准做法，Superpave的体积设计沥青混合料（人道主义排雷）Standard Practice for Superpave Volumetric Design for Hot-Mix Asphalt (HMA)

AASHTO R 30-2002 标准做法，混合空调的沥青混合料（人道主义排雷）Standard Practice for Mixture Conditioning of Hot-Mix Asphalt (HMA)

AASHTO R 27-2001 标准建议的做法进行评估腐蚀的钢桩非海洋应用Standard Recommended Practice for Assessment of Corrosion of Steel Piling for Non-Marine Applications AASHTO R 25-2000 标准建议的做法为技术员的培训和资格程序Standard Recommended Practice for Technician Training and Qualification Programs

AASHTO R 24-1999 标准建议的做法，为收集和保存的水样本Standard Recommended Practice for Collection and Preservation of Water Samples

AASHTO R 18-2006 标准建议的做法，为建立和实施质量体系建设的材料测试实验室Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Materials Testing Laboratories

AASHTO R 16-2004 标准建议的做法，为规管工作上的资料为所使用的化学品aashto测试Standard Recommended Practice for Regulatory Information for Chemicals Used in AASHTO Tests

AASHTO R 12-1985 标准规格为沥青混合料的设计使用马歇尔和hveem程序Standard Specifications for Bituminous Mixture Design Using the Marshall and Hveem Procedures

AASHTO QA-1-1996 质量保证，引导规范Quality Assurance Guide Specification

AASHTO PS-2006 aashto临时标准AASHTO Provisional Standards

AASHTO PP55-2003 路面行驶品质时，使用惯性测量剖面系统2003年版Pavement Ride Quality when Measured Using Inertial Profiling System-2003 Edition

AASHTO PP 55-2006 overcoating田间试验程序，以评估保护涂料对现有桥梁或挽救梁Overcoating Field Test Program for Evaluating Protective Coatings on Existing Bridges or Salvaged Beams

AASHTO PP 53-2006 设计考虑当使用填海沥青油毡瓦在新的沥青混合料Design Considerations When Using Reclaimed Asphalt Shingles in New Hot-Mix Asphalt

AASHTO PP 48-2003 标准做法，评价的Superpave的旋回压实（律师）内部的角度回转Standard Practice for Evaluation of the Superpave Gyratory compactor (SGC) Internal Angle of Gyration

AASHTO PP 46-2001 建议的做法，为土工合成材料reinforement的总结基地的过程中柔性

路面结构Recommended Practice for Geosynthetic Reinforement of the Aggregate Base Course

of Flexible Pavement Structure

AASHTO PP 41-2002 标准做法，设计石基质沥青（形状记忆合金）Standard Practice for Designing Stone Matrix Asphalt (SMA)

AASHTO PP 38-2000 标准做法determinig最高车辙深度的沥青路面Standard Practice for Determinig Maximum Rut Depth in Asphalt Pavements

AASHTO PP 37M-1999 标准做法，量化粗糙度的行人路Standard Practice for Quantifying

Roughness of Pavements

AASHTO PP 34-1999 标准做法，估计开裂的趋势，具体Standard Practice for Estimating the Cracking Tendency of Concrete

AASHTO PP-2003 积极的保护-减少风险，保护工人和驾驶人Positive Protection - Reducing Risk, Protecting Workers and Motorists

AASHTO PG06-2007 医生鈥橲手册咨询根据第106条的国家的历史保存法PRACTITIONER鈥

橲HANDBOOK CONSULTING UNDER SECTION 106 OF THE NATIONAL HISTORIC PRESERVATION ACT

AASHTO PG03-1-2006 管理nepa过程中收费车道和收费道路MANAGING THE NEPA PROCESS FOR TOLL LANES AND TOLL ROADS

AASHTO PG01-1-2006 维持一个项目文件和拟定一项行政纪录为 1 nepa研究MAINTAINING

A PROJECT FILE AND PREPARING AN ADMINISTRATIVE RECORD FOR A NEPA STUDY

AASHTO PAR-1-2005 保护美国麓s道路，桥梁，隧道：国家的作用点在国土安全部

Protecting America麓s Roads, Bridges, and Tunnels: The Role of State DOTs in Homeland Security

AASHTO NTCIP 9001-2002 美国国家运输通信及其议定书-n tcip指南-更新版本3- v 0 3.02b;推

荐信息报告的联合委员会关于nt cip National Transportation Communications for ITS Protocol

- The NTCIP Guide - updated version 3-v03.02b; A Recommended Information Report of the Joint Committee on the NTCIP

AASHTO NTCIP 8003-2001 美国国家运输通信及其议定书的框架简介- v01.08 ;一项联合信息

管理的政策，aashto ，ite ，和消防防灾National Transportation Communications for ITS Protocol Profile Framework-v01.08; A Joint Information Management Policy of AASHTO, ITE, and

NEMA

AASHTO NTCIP 2303-2001 美国国家运输通信及其议定书的文件传输协议的应用简介- v01.06 ;一

项联合标准aashto ，ite ，和消防防灾National Transportation Communications for ITS Protocol File Transfer Protocol Application Profile-V01.06; A Joint Standard of AASHTO, ITE, and

NEMA

AASHTO NTCIP 2101-2001 美国国家运输通信及其议定书-点，以多点议定书使用R S- 2 32的

子网简介- v 01.19;一项联合标准 a ashto，i te，和消防防灾National Transportation Communications for ITS Protocol - Point to Multi-Point Protocol Using RS-232 Subnetwork Profile-v01.19; A Joint Standard of AASHTO, ITE, and NEMA

AASHTO NTCIP 1408-2001 过境通信接口的配置文件的一部分，美国国家运输通信及其议定

书的标准收费（财委会）业务领域的对象- v01.01 ;一项联合标准aashto ，ite ，和消防防

灾;还引用作为tcip -财委会Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Fare Collection (FC) Business Area

Objects-v01.01; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-FC

AASHTO NTCIP 1407-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定

书的标准，控制中心（CC ）的物体- v01.02 ;一项联合标准aashto ，ite ，和消防防灾;

还引用作为tcip -消委会Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Control Center (CC) Objects-v01.02;

A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-CC

AASHTO NTCIP 1406-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定

书的标准，对板（转播）对象- v01.02 ;一项联合标准aashto ，ite ，和消防防灾;还引用

作为tcip -转播Transit Communications Interface Profiles part of the National Transportation

Communications for ITS Protocol Standard on On-Board (OB) Objects-v01.02; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-OB

AASHTO NTCIP 1405-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定

书的标准，空间的代表性（SP ）的物体- v01.02 ;联合标准aashto ，ite ，和消防防灾;还引用作为tcip - SP的; 2001年春季印刷Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Spatial Representation (SP) Objects-v01.02; Joint Standard of AASHTO, I TE, and NEMA; Also referenced as TCIP-SP; S pring 2001 printing

AASHTO NTCIP 1403-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定

书的标准，乘客信息（PI ）的物体- v01.02 ;联合标准aashto ，ite ，和消防防灾;还引用作为tcip丕; 2001年春季印刷Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Passenger Information (PI) Objects-

v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-PI; Spring 2001 printing

AASHTO NTCIP 1402-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定

书的标准，事件管理（IM ）的物体- v01.02 ;联合标准aashto ，ite ，和消防防灾;还引用作为tcip -即时通讯; 2001年春季印刷Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Incident Management (IM) Objects-v01.02; Joint Standard of AASHTO, I TE, and NEMA; Also referenced as TCIP-IM; Spring 2001 printing

AASHTO NTCIP 1401-2000 过境通信接口的配置文件的一部分，美国国家运输通信及其议定

书的标准，共同的公共交通（中华映管）的物体- v01.02 ;一项联合stanard的aashto ，ite ，和消防防灾;还引用作为tcip -中华映管Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Common Public Transportation (CPT) Objects-v01.02; A Joint Stanard of AASHTO, ITE, and NEMA; Also referenced as TCIP-CPT

AASHTO NTCIP 1205-2001 美国国家运输通信及其议定书的对象定义为闭路电视（闭路电视）

照相机控制v01.08 ;一项联合标准aashto ，ite ，和消防防灾National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Camera Control-v01.08; A Joint Standard of AASHTO, ITE, and NEMA

AASHTO NTCIP 1204-1998 美国国家运输通信及其议定书-对象定义为环境传感器站（ e ss）- v 01.13;一项联合标准 a ashto，i te，和消防防灾;包括共同批准n tcip1 204年修订一v 02： 2 001年1 1月2 3日National Transportation Communications for ITS Protocol - Object Definitions for Environmental Sensor Stations (ESS)-v01.13; A Joint Standard of AASHTO, ITE, and NEMA; Includes Jointly Approved NTCIP 1204 Amendment 1 v02: November 23, 2001

AASHTO NTCIP 1203-1997 美国国家运输通信及其议定书（ntcip ）对象定义为动态信息标

志（简称DMS ）- v01.15 ;一项联合标准aashto ，ite ，和消防防灾; 1999年12月1日National Transportation Communications for ITS Protocol (NTCIP) Object Definitions for Dynamic Message Signs (DMS)-V01.15; A Joint Standard of AASHTO, ITE, and NEMA; December 1, 1999 AASHTO NTCIP 1202-1996 美国国家运输通信及其议定书（ntcip ）对象定义为驱动的交通

信号控制单位-原编号消防防灾6月24日ts 3.5-1996 ;一项联合标准aashto ，ite ，和消防防灾National Transportation Communications for ITS Protocol (NTCIP) Object Definitions for Actuated Traffic Signal Controller Units-Formerly Numbered NEMA TS 3.5-1996; A Joint Standard

of AASHTO, ITE, and NEMA

AASHTO NTCIP 1201-1996 美国国家运输通信及其议定书-全局对象的定义- v 01.10;一项联合标准a ashto，i te，和消防防灾;包括共同批准n tcip1 201年修订一v 07： 2 001年1 2月National Transportation Communications for ITS Protocol - Global Object Definitions-v01.10; A Joint Standard of AASHTO, ITE, and NEMA; Includes Jointly Approved NTCIP 1201 Amendment 1 v07: December 2001

AASHTO MSI-1988 手册对地下调查-第十八版Manual on Subsurface Investigations-Eighteenth Edition

AASHTO MSD-2006 保持战略方向，为保护美国的运输系统Maintaining Strategic Direction for Protecting America's Transportation System

AASHTO MP 15-2006 标准规格为使用再生沥青瓦作为添加剂的沥青混合料Standard Specification for Use of Reclaimed Asphalt Shingle as an Additive in Hot-Mix Asphalt

AASHTO MP 14-2005 标准规格为光滑的路面在办法称重中的议案（动态称重）级Standard Specification for Smoothness of Pavement at the Approaches to Weigh-in-Motion (WIM) Scales AASHTO MP 12-2004 标准做法，表面探测的警告Standard Practice for Detectable Warning Surfaces

AASHTO MP 10-2003 标准规格为堆肥侵蚀/沉积物控制（堆肥毛毡）Standard Specification for Compost Erosion/Sediment Control (Compost Blankets)

AASHTO MP 8-2005 标准规格设计石基质沥青（形状记忆合金）Standard Specification for Designing Stone Matrix Asphalt (SMA)

AASHTO MMS-1-2005 指引维修管理系统Guidelines for Maintenance Management Systems AASHTO MLCW-2007 aashto / naco / nado中西部地区的地方协商讲习班AASHTO/NACo/NADO Midwest Local Consultation Workshop

AASHTO MDM-3-2005 模型排水手册（美国和SI单位）Model Drainage Manual (U.S. and SI Units)

AASHTO MCEB-2-1994 手册条件评价桥梁-第二版;包括临时规格：1995年，1996年，1998年，2000年，2001年和2003年Manual for Condition Evaluation of Bridges-Second Edition; Includes Interim Specifications: 1995, 1996, 1998, 2000, 2001, and 2003

AASHTO M 324-2004 标准规格为联合打击密封胶，热应用，混凝土和沥青路面-美国ASTM disgnation ： d 6690-01 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements-ASTM Disgnation: D 6690-01

AASHTO M 322M/M 322-2006 标准规格的铁路钢和车轴钢变形的酒吧为钢筋混凝土- ASTM 标准： 1 996 /一996米- 05 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement-ASTM Designation: A 996/A 996M-05

AASHTO M 320-2005 标准规格，性能分级沥青粘结剂Standard Specification for Performance-Graded Asphalt Binder

AASHTO M 319-2002 标准规格为填海工程混凝土骨料为不受限制的土壤-聚集基地的过程中

-重介- 22 ; IB部分Standard Specification for Reclaimed Concrete Aggregate for Unbound Soil-Aggregate Base Course-HM-22; Part IB

AASHTO M 318-2002 标准规格的玻璃碎玻璃所使用的土壤总量基地的过程中-重介- 22 ; IB 部分Standard Specification for Glass Cullet Use for Soil-Aggregate Base Course-HM-22; Part IB AASHTO M 317M/M 317-2003 标准规格为环氧涂层钢筋：处理要求的制备和求职网站- ASTM标准： d 3963 / 3963米- 01 Standard Specification for Epoxy-Coated Reinforcing Bars: Handling Requirements for Fabrication and Job Site-ASTM Designation: D 3963/D 3963M-01 AASHTO M 315-2006 标准规格为关节混凝土管及沙井，用橡胶垫片- ASTM标准的指定中：

C 443-05 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets-ASTM Designation: C 443-05

AASHTO M 314-1990 标准规格为钢锚杆Standard Specification for Steel Anchor Bolts

AASHTO M 307-2005 标准规格为硅粉使用的水泥混合物- ASTM标准的指定中： C 1240 - 03a Standard Specification for Silica Fume Used in Cementitious Mixtures-ASTM Designation: C 1240-03a

AASHTO M 303-1989 标准规格为石灰沥青混合料Standard Specification for Lime for Asphalt Mixtures

AASHTO M 297-1998 标准规格为预制氯丁橡胶联合密封的桥梁-美国ASTM指定 d 3542-92 （1998 ）Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges-ASTM Designation D 3542-92(1998)

AASHTO M 295-2006 标准规格为粉煤灰和原材料或煅烧天然pozzolan使用在混凝土ASTM 标准的指定中： C 618-03 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete-ASTM Designation: C 618-03

AASHTO M 294-2006 标准规格的瓦楞纸聚乙烯管材，300 -1 500毫米直径Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter

AASHTO M 293M-2006 标准规格为淬硬钢垫圈[公制] -美国ASTM指定f四百三十六米- 04 Standard Specification for Hardened Steel Washers [Metric]-ASTM Designation F 436M-04 AASHTO M 293-2006 标准规格为淬硬钢垫圈-美国ASTM指定 f 436-04 Standard Specification for Hardened Steel Washers-ASTM Designation F 436-04

AASHTO M 291M-2006 标准规格为碳和合金钢坚果（公制）-美国ASTM指定一五六三米- 04 Standard Specification for Carbon and Alloy Steel Nuts (Metric)-ASTM Designation A 563M-04 AASHTO M 291-2006 标准规格为碳和合金钢坚果-美国ASTM指定1 563 - 04a Standard Specification for Carbon and Alloy Steel Nuts-ASTM Designation A 563-04a

AASHTO M 285M/M 285-2003 标准规格为铸件，铁铬镍，耐腐蚀，严重服务ASTM标准指定a744/a744m-00 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service-ASTM Designation A744/A744M-00

AASHTO M 284M/M 284-2006 标准规格为环氧涂层钢筋：材料和涂料的要求-美国ASTM指定一775 /一775米- 04a Standard Specification for Epoxy-Coated Reinforcing Bars: Materials and Coating Requirements-ASTM Designation A 775/A 775M-04a

AASHTO M 282-1999 标准规格为联合密封胶，热浇，弹性型，为波特兰水泥混凝土路面- ASTM标准的名称; d 3406-95 （2000 ）Standard Specification for Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements-ASTM Designation; D 3406-95 (2000)

AASHTO M 279-2003 标准规格的金属涂层，钢织铁丝网织物-美国ASTM a116 - 00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric-ASTM A116-00

AASHTO M 273-2000 标准规格为预制钢筋混凝土箱部分桥涵，雨水渠，污水渠，与不少于

2平方呎，包括受到公路荷载-美国ASTM c850 - 95a Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings-ASTM C850-95a

AASHTO M 270M/M 270-2005 标准规格为结构钢桥梁- ASTM标准： 1 709 /一七〇九米- 05 Standard Specification for Structural Steel for Bridges-ASTM Designation: A 709/A 709M-05 AASHTO M 264-2003 标准规格为丙烯腈-丁二烯-苯乙烯（ABS树脂）和聚（氯乙烯）（聚氯乙烯）复合材料的污水管道- ASTM标准： d 2680-01 Standard Specification for

Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping-ASTM Designation: D 2680-01

AASHTO M 262-2006 标准的定义，有关的条款，混凝土管及相关产品-美国ASTM指定 c 822 - 05a Standard Definitions of Terms Relating to Concrete Pipe and Related Products-ASTM Designation C 822-05a

AASHTO M 261-1996 标准规格为标准的轮胎路面摩擦性能测试，美国ASTM指定e 501-94 （2000 ）Standard Specification for Standard Tire for Pavement Frictional Property Tests-ASTM Designation E 501-94 (2000)

AASHTO M 254-2006 标准规格为耐腐蚀涂层柱酒吧Standard Specification for Corrosion-Resistant Coated Dowel Bars

AASHTO M 253M-2005 标准规格为高强度钢螺栓，班10.9和10.9.3 ，结构钢接头[公制] - ASTM标准：一四九○米- 04a Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]-ASTM Designation: A 490M-04a

AASHTO M 253-2005 标准规格为结构螺栓，合金钢，热处理，150 ksi最小抗拉强度- ASTM 标准： 1 490 - 04a Standard Specification for Structural Bolts, Alloy Steel, Heat-Treated, 150 ksi Minimum Tensile Strength-ASTM Designation: A 490-04a

AASHTO M 252-2006 标准规格的瓦楞纸聚乙烯排水管Standard Specification for Corrugated Polyethylene Drainage Pipe

AASHTO M 249-1998 标准规格为白色和黄色反光带热塑性材料（固体的形式）Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)

AASHTO M 248-1991 标准规格为现成的混合白色和黄色的交通油漆Standard Specification for Ready-Mixed White and Yellow Traffic Paints

AASHTO M 247-2005 标准规格为玻璃珠使用的交通油漆Standard Specification for Glass Beads Used in Traffic Paints

AASHTO M 246-2005 标准规格的钢板，金属涂层和聚合物预涂，波纹钢管ASTM标准： 1 742 /一742米- 03 Standard Specification for Steel Sheet, Metallic-Coated and Polymer- Precoated, for Corrugated Steel Pipe-ASTM Designation: A 742/A 742M-03

AASHTO M 243-1996 标准规格为外地应用涂层的金属结构瓦楞纸板管，管拱门，拱门Standard Specification for Field Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches

AASHTO M 242M/M 242-2006 标准规格的钢筋混凝土的 D -负荷涵洞，风暴流失，和下水道

管ASTM标准的指定中： C 655米/炭655-04素E1 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe-ASTM Designation: C 655M/C 655-04 e1 AASHTO M 240-2005 标准规格为混纺液压水泥ASTM标准的指定中： C 595-03 Standard Specification for Blended Hydraulic Cement-ASTM Designation: C 595-03

AASHTO M 237-1996 标准规格为环氧树脂胶粘剂的粘接交通标志，以硬化波特兰水泥和沥

青混凝土Standard Specification for Epoxy-Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete

AASHTO M 235M/M 235-2003 标准规格为环氧树脂胶粘剂- ASTM标准的指定中： C 881-99 Standard Specification for Epoxy Resin Adhesives-ASTM Designation: C 881-99

AASHTO M 233-1986 标准规格为煮沸的亚麻油合剂治疗波特兰水泥混凝土Standard Specification for Boiled Linseed Oil Mixture for Treatment of Portland Cement Concrete

AASHTO M 231-1995 标准规格为称重装置中使用的测试材料Standard Specification for Weighing Devices Used in the Testing of Materials

AASHTO M 230-1998 标准规格为挤压泡沫委员会（聚苯乙烯）Standard Specification for Extruded Foam Board (Polystyrene)

AASHTO M 225M/M 225-2005 标准规格的钢丝，变形，钢筋混凝土- ASTM标准： 1 496-02 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement-ASTM Designation:

A 496-02

AASHTO M 224-1991 标准规格为使用防护封口为波特兰水泥混凝土Standard Specification for Use of Protective Sealers for Portland Cement Concrete

AASHTO M 219-1992 标准规格的瓦楞纸铝合金结构板为外地螺栓管，管拱门，拱门-美国ASTM b746/b746m-92 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches-ASTM B746/B746M-92

AASHTO M 216-2005 标准规格为石灰稳定土- ASTM标准的指定中： C 977-03 Standard Specification for Lime for Soil Stabilization-ASTM Designation: C 977-03

AASHTO M 213-2001 标准规格为预制伸缩缝填料混凝土路面和结构建设（nonextruding和弹性沥青类型）-美国ASTM指定d 1751年至1799年Standard Specification for Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)-ASTM Designation D 1751-99

AASHTO M 210-2006 标准规格为使用器具进行测定长度变化的硬化水泥浆体，砂浆，混凝

土ASTM标准指定 c 490-04 Standard Specification for Use of Apparatus for the Determination

of Length Change of Hardened Cement Paste, Mortar, and Concrete-ASTM Designation C 490-04 AASHTO M 208-2001 标准规格为阳离子乳化沥青-陛下- 22 ;的一部分，保险业监督; ASTM标准指定 d 2397-98 Standard Specification for Cationic Emulsified Asphalt-HM-22; Part IA; ASTM Designation D 2397-98

AASHTO M 207M/M 207-2006 标准规格的钢筋混凝土椭圆形暗渠，风暴流失和污水管（公

制）-美国ASTM指定c五〇七米- 05a Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain and Sewer Pipe (Metric)-ASTM Designation C 507M-05a

AASHTO M 206M/M 206-2006 标准规格的钢筋混凝土拱涵，风暴流失，和下水道管ASTM 标准的指定中： C 506 - 05a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe-ASTM Designation: C 506-05a

AASHTO M 202M/M 202-2006 标准规格为钢板桩-美国ASTM指定一328 /一三百二十八米- 05 Standard Specification for Steel Sheet Piling-ASTM Designation A 328/A 328M-05

AASHTO M 201-2006 标准规格为混合室，潮湿的橱柜，潮湿的房间，和水箱中使用的测试

液压水泥和混凝土- ASTM标准的指定中： C 511-05 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes-ASTM Designation: C 511-05

AASHTO M 195-2006 标准规格为轻集料结构混凝土第二十版; ASTM标准c330 - 04 Standard Specification for Lightweight Aggregates for Structural Concrete-Twentieth Edition; ASTM C330-

04

AASHTO M 190-2004 标准规格为沥青包覆金属波纹涵管和管拱Standard Specification for Bituminous Coated Corrugated Metal Culvert Pipe and Pipe Arches

AASHTO M 182-2005 标准规格为burlap布制成的黄麻或红麻和棉花垫Standard Specification for Burlap Cloth Made from Jute or Kenaf and Cotton Mats

AASHTO M 180-2000 标准规格为波纹板型钢梁公路护栏Standard Specification for Corrugated Sheet Steel Beams for Highway Guardrail

AASHTO M 178M/M 178-2006 标准规格为混凝土排水管瓦ASTM标准的指定中：C四百一

十二米- 04和C 412-03 Standard Specification for Concrete Drain Tile-ASTM Designation: C 412M-04 and C 412-03

AASHTO M 170M-2006 标准规格的钢筋混凝土涵洞，风暴流失，和下水道管（公制）- ASTM标准的指定中：C七六米- 05 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)-ASTM Designation: C 76M-05

AASHTO M 170-2006 标准规格的钢筋混凝土涵洞，风暴流失，和下水道管ASTM标准的指定中： C 76-05 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe-ASTM Designation: C 76-05

AASHTO M 167M/M 167-2005 标准规格为波纹钢结构板，锌涂层，为外地螺栓管，管拱门，

拱门- ASTM标准： 1 761 /一761米- 04 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches-ASTM Designation: A 761/A 761M-04

AASHTO M 163M/M 163-2006 标准规格为铸件，铁，铬，铁铬镍，耐腐蚀，一般应用的

ASTM标准： 1 743 /一七四三米- 03 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application-ASTM Designation: A 743/A 743M-03

AASHTO M 160M/M 160-2006 标准规格为总体要求的钢板，形状，资产负债表打桩，和酒

吧的结构使用ASTM标准degsignation ： 6 / 1 6 - 05 Standard Specification for General Requirements for Steel Plates, Shapes, Sheet Piling, and Bars for Structural Use-ASTM Degsignation: A 6/A 6M-05

AASHTO M 157-2006 标准规格为准备预拌混凝土Standard Specification for Ready-Mixed Concrete

AASHTO M 155-1987 标准规格的颗粒物质控制抽水下，水泥混凝土路面Standard Specification for Granular Material to Control Pumping under Concrete Pavement

AASHTO M 154-2006 标准规格的空调entraining混凝土外加剂-美国ASTM指定c 260-01 Standard Specification for Air-Entraining Admixtures for Concrete-ASTM Designation C 260-01 AASHTO M 148-2005 标准规格为液膜形成的化合物固化混凝土ASTM标准的指定中： C 309-03 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete-ASTM Designation: C 309-03

AASHTO M 145-1991 标准规格的分类，土壤和土壤集料的混合物为公路建设的目的Standard Specifications for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

AASHTO M 144-2004 标准规格为氯化钙- ASTM标准： d 98-98 Standard Specification for Calcium Chloride-ASTM Designation: D 98-98

AASHTO M 140-2003 标准规格为乳化沥青-美国ASTM指定d 977-98 Standard Specification for Emulsified Asphalt-ASTM Designation D 977-98

AASHTO M 138M/M 138-2002 标准规格为铜表，带，板，并推出条码陛下- 22 ：第一部分保险业监督; ASTM标准： b 152 / b一百五十二米- 00 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar-HM-22: Part IA; ASTM Designation: B 152/B 152M-00

AASHTO M 120-2005 标准规格为锌ASTM标准： b 6月3日Standard Specification for Zinc-ASTM Designation: B 6-03

AASHTO M 108-2005 标准规格为变形铜合金轴承和扩展板和床单，桥梁和其他结构的使用

ASTM标准： b 100 03a Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use-ASTM Designation: B 100-03a

AASHTO M 86M/M 86-2006 标准规格为具体的下水道，风暴流失，和涵管- ASTM标准的指

定中：C十四米- 04和C 14-03 Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe-ASTM Designation: C 14M-04 and C 14-03

AASHTO M 85-2006 标准规格为波特兰水泥- ASTM标准的指定中： C 150 04a Standard Specification for Portland Cement-ASTM Designation: C 150-04a

AASHTO M 82-1975 标准规格为削减沥青（中等固化型）Standard Specification for Cutback Asphalt (Medium-Curing Type)

AASHTO M 57-1980 标准规格为材料的河堤和路基Standard Specification for Materials for Embankments and Subgrades

AASHTO M 55M/M 55-2005 标准方法试验钢焊接的导线加固，平原，混凝土ASTM标准：

1 185-0

2 Standard Method of Test for Steel Welded Wire Reinforcement, Plain, for Concrete-ASTM Designation: A 185-02

AASHTO M 43-2005 标准规格为大小总计为道路和桥梁建设ASTM标准： d 448 - 03a Standard Specification for Sizes of Aggregate for Road and Bridge Construction-ASTM Designation: D 448-03a

AASHTO M 36-2003 标准规格为波纹钢管，金属涂层，污水渠及雨水渠- ASTM标准： 1 760 /一七百六十〇米- 01a Standard Specification for Corrugated Steel Pipe, Metallic-Coated, for Sewers and Drains-ASTM Designation: A 760/A 760M-01a

AASHTO M 31M/M 31-2006 标准规格为变形和平原碳-钢筋混凝土加固- ASTM标准： 1 615 /一六百一十五米- 05 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement-ASTM Designation: A 615/A 615M-05

AASHTO M 30-2002 标准规格为锌涂层钢丝绳和配件的公路护栏-陛下- 22 ;的一部分，保险

业监督; ASTM标准： 1 741-98 Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail-HM-22; PART IA; ASTM Designation: A 741-98

AASHTO M 20-1970 标准规格为渗透率级沥青水泥Standard Specification for Penetration-Graded Asphalt Cement

AASHTO LTS-4-2001 标准规格的结构性支持，为公路标志，灯具和交通信号-第四版;临时2002年中期2003年Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals-Fourth Edition; Interim 2002; Interim 2003

AASHTO LRFR-2003 指南手册，供条件的评价和负载和阻力系数评级（lrfr ）公路桥梁修

订的封面; 2005年中期GUIDE MANUAL FOR CONDITION EVALUATION AND LOAD AND RESISTANCE FACTOR RATING (LRFR) OF HIGHWAY BRIDGES-Revised cover sheet; Interim 2005 AASHTO LRFD-CONS A MD-2004 aashto lrfd桥梁施工技术指标-第二版AASHTO LRFD Bridge Construction Specifications-Second Edition

AASHTO ITF-1995 创新交通融资;一份报告，结果一次全国性调查由美国协会的州公路和运

输官员Innovative Transportation Financing; A Report on the Results of a National Survey by the American Association of State Highway and Transportation Officials

AASHTO IQED-1-2006 提高质量，环保方面的文件Improving the Quality of Environmental Documents

AASHTO HWPD-1-1990 危险废物的指南，项目开发Hazardous Waste Guide for Project Development

AASHTO HM-26-2006 标准规格为运输材料和方法的采样和测试-第二十六版;的一部分，保

险业监督与IB部分;第IIA部及部分独立调查委员会;包括2006年的PS Standard Specifications for Transportation Materials and Methods of Sampling and Testing-26th Edition;

Part IA & Part IB; Part IIA & Part IIB; Includes PS 2006

AASHTO HDS-1-2005 高清晰度的调查- HDS公司HIGH DEFINITION SURVEYS-HDS

AASHTO HDG GLOSSARY-2007 词汇公路有关的排水条件第4版GLOSSARY O F HIGHWAY-RELATED DRAINAGE TERMS-4th edition

AASHTO HDG CHAPTER 15-2007 准则选择和利用水力工程顾问-第4版GUIDELINES FOR SELECTING AND UTILIZING HYDRAULICS ENGINEERING CONSULTANTS-4th edition

AASHTO HDG CHAPTER 13-2007 培训和职业发展的液压工程师-第4版TRAINING AND CAREER DEVELOPMENT OF HYDRAULICS ENGINEERS-4th edition

AASHTO HDG CHAPTER 10-2007 评价公路的影响，地表水环境-第4版EVALUATING HIGHWAY EFFECTS ON SURFACE WATER ENVIRONMENTS-4th edition

AASHTO HDG CHAPTER 8-2007 液压方面的恢复和提升公路-第4版HYDRAULIC A SPECTS IN RESTORATION AND UPGRADING OF HIGHWAYS-4th edition

AASHTO HDG CHAPTER 6-2007 液压分析与设计的开放频道-第4版HYDRAULIC A NALYSIS AND DESIGN OF OPEN CHANNELS-4th edition

AASHTO HDG CHAPTER 4-2007 水力设计涵洞-第4版HYDRAULIC D ESIGN O F CULVERTS-4th edition

AASHTO HDG CHAPTER 2-2007 水文-第4版HYDROLOGY-4th edition

AASHTO HDG CHAPTER 1-2007 液压考虑在公路的规划和定位第4版HYDRAULIC CONSIDERATIONS IN HIGHWAY PLANNING AND LOCATION-4th edition

AASHTO HDG-2007 公路排水指引-第4版Highway Drainage Guidelines-4th edition

AASHTO HCE-2003 战略绩效的措施，国家有关部门的运输;手册的CEO和总裁- nchrp项目

编号20-24 （20 ）Strategic Performance Measures for State Departments of Transportation;

A Handbook for CEOs and Executives-NCHRP Project No. 20-24 (20)

AASHTO HBF-2-2003 引导规范公路大桥的制备与hps七十零瓦特（hps四八五瓦特）钢GUIDE SPECIFICATION FOR HIGHWAY BRIDGE FABRICATION WITH HPS 70W (HPS 485W) STEEL AASHTO H B-17 TOC-2002 标准规格为公路桥梁-第十七版;勘误表：2003分之01 ;勘误表：

03/2005 Standard Specifications for Highway Bridges-17th Edition; Errata: 01/2003; Errata:

03/2005

AASHTO HB-17 DIVISION II SEC 25-2002 司第二建筑-钢筋和混凝土隧道衬砌Division II Construction - Steel and Concrete Tunnel Liners

AASHTO H B-17 DIVISION II SEC 24-2002 司第二建筑-气动应用砂浆Division II Construction - Pneumatically Applied Mortar

AASHTO HB-17 DIVISION II SEC 23-2002 司第二建设-杂项金属Division II Construction - Miscellaneous Metal

AASHTO HB-17 DIVISION II SEC 21-2002 司第二建筑-防水Division II Construction - Waterproofing

AASHTO HB-17 DIVISION II SEC 20-2002 司第二建筑-栏杆Division II Construction - Railings AASHTO H B-17 DIVISION II SEC 19-2002 司第二建筑-桥面联合海豹Division II Construction - Bridge Deck Joint Seals

AASHTO HB-17 DIVISION II SEC 18-2002 司第二建筑-轴承-勘误表 2 003分之01 Division II Constuction - Bearings-Errata 01/2003

AASHTO HB-17 DIVISION II SEC 16-2002 司第二建筑-木结构Division II Construction - Timber Structures

AASHTO HB-17 DIVISION II SEC 15-2002 司第二建筑-混凝土砌块和砖混Division II

Construction - Concrete Block and Brick Masonry

AASHTO ALFD-2-1991 指南的规格，候补委员，负荷因子设计的程序，钢梁桥使用支撑紧凑

路段修订的百分之临时规格-桥梁- 19 94年Guide Specifications for Alternate Load Factor Design Procedures for Steel Beam Bridges Using Braced Compact Sections-Revised per Interim Specifications - Bridges - 1994

AASHTO HB-17 DIVISION II SEC 7-2002 司第二建筑-土挡土系统Division II Construction - Earth Retaining Systems

AASHTO HB-17 DIVISION II SEC 4-2002 司第二建筑-驱动的基桩Division II Construction - Driven Foundation Piles

AASHTO HB-17 DIVISION I SEC 17-2002 司i设计-土壤-热塑性管道的互动系统Division I Design - Soil-Thermoplastic Pipe Interaction Systems

AASHTO HB-17 DIVISION I SEC 16-2002 司i设计-土壤-钢筋混凝土结构的互动系统Division I Design - Soil-Reinforced Concrete Structure Interaction Systems

AASHTO HB-17 DIVISION I SEC 13-2002 司i设计-木结构Division I Design - Wood Structures AASHTO HB-17 DIVISION I SEC 12-2002 司i设计-土壤-波纹金属结构的互动系统-勘误表 2 0 03分之01 Division I Design - Soil-Corrugated Metal Structure Interaction Systems-Errata 01/2003

AASHTO HB-17 DIVISION I SEC 11-2002 司i设计-铝设计Division I Design - Aluminum Design AASHTO HB-17 DIVISION I SEC 9-2002 司i设计-预应力混凝土（A部分，B部分，C部分，D部分）Division I Design - Prestressed Concrete-(Part A, Part B, Part C, and Part D)

AASHTO HB-17 DIVISION I SEC 6-2002 司i设计-涵洞Division I Design - Culverts

AASHTO HB-17 DIVISION I-A SEC 7-2002 保险业监督司的抗震设计-设计的要求，在桥梁的抗

震性能类别C和D -勘误表 2 003分之01 Division I-A Seismic Design - Design Requirements for Bridges in Seismic Performance Categories C and D-Errata 01/2003

AASHTO HB-17 DIVISION I-A SEC 3-2002 保险业监督司的抗震设计-一般要求Division I-A Seismic Design - General Requirements

AASHTO HB-17 DIVISION I-A SEC 1-2002 司的I -一抗震设计-引言Division I-A Seismic Design - Introduction

AASHTO GTN-3-1993 指南评价和消减交通噪音Guide on Evaluation and Abatement of Traffic Noise

AASHTO GSW-4-2001 指南车的重量和尺寸出版的2004年4月22日Guide for Vehicle Weights and Dimensions-Published 04/22/2004

AASHTO GSIC-1-1999 指南雪和冰的控制Guide for Snow and Ice Control

AASHTO GSH-8-1998 指南规格的公路建设-第八版Guide Specifications for Highway Construction-Eighth Edition

AASHTO GSCB-2-1999 指南规格的设计与施工段混凝土桥梁的第二版;临时2003年Guide Specifications for Design and Construction of Segmental Concrete Bridges-Second Edition; Interim 2003

AASHTO GSBTW-1995 指南设计规格为桥临时工程Guide Design Specifications for Bridge Temporary Works

AASHTO GPSS-1-1997 指南绘画钢结构Guide for Painting Steel Structures

AASHTO GL-6-2005 巷道照明设计指南Roadway Lighting Design Guide

AASHTO GHC-4-2003 aashto指南规格横向弧形钢梁公路桥梁-与设计的例子，因为我梁和箱

梁桥-勘误表： 1 0/2003 AASHTO Guide Specification for Horizontally Curved Steel Girder