汽车专业英语读译教程翻译UNIT 8 TEXT A
第8单元离合器、手动变速器和传动系统
课文A 离合器和手动变速器
1.离合器
在采用手动变速器或手动变速驱动桥的小汽车和货车上，离合器总成的功能是连接或切断从发动机到传动系统的动力传送。虽然离合器设计有许多种，但是它们的工作原理都基本相同。
1）离合器的作用
离合器是一个为连接或切断从一个工作部件到另一个工作部件的动力传递而设计的机构。在车辆上，离合器用来传递发动机动力，并在换档时，使发动机与变速器之间分离。当汽车停止行驶，却没有将变速器置于空档的情况下，离合器还能使发动机运转。
2）离合器的构造
现代离合器为单片、干盘式（图8-1）。它有5个主要部件：飞轮、离合器从动盘、压盘组件、分离轴承和离合器分离杠杆。构成离合器总成的其他部件有变速器输入轴和离合器壳。
（1）飞轮
除了用来安装起动机齿圈外，飞轮还构成了安装离合器其他部件的基础件。与手动变速器一起使用的飞轮较厚，从而能使它吸收离合器工作时所产生的大量的热。
飞轮的离合器一侧经过机械加工，表面平整，用作摩擦表面。飞轮上钻有若干孔，以便安装离合器总成。通常，有一个孔直接钻到曲轴中心，这个孔可使一个轴承装入飞轮中心。
飞轮中心内的这个轴承将用来支承变速器输入轴的外端。该轴承被称为导向轴承。导向轴承可以是球轴承，或是青铜衬套。
（2）双质量飞轮
有时，柴油机采用双质量飞轮。为了吸收发动机作功行程的脉动，当飞轮两部分相对压缩时，飞轮内安装的弹簧起到了减震器的作用，从而使功率流均匀分布。这些弹簧还有助于降低离合器和变速器部件的应力。
（3）从动盘
从动盘为圆形部件，它是由优质薄钢片与位于中心部位的花键毂构成。花键毂的花键与变速器输入轴上的花键相啮合。从动盘可以在变速器输入轴上来回滑动，而当从动盘转动时，变速器输入轴也必须转动。
从动盘外缘两侧覆盖有摩擦材料。摩擦材料常常为石棉或其他耐高温材料与铜丝编制或模压在一起所形成的材料。摩擦材料用铆钉铆接到从动盘上。
为了平稳啮合，从动盘的外缘常常做成分开式的，并且每一段钢片均呈弧形。每一段钢片上都铆有摩擦材料。当从动盘受压时，弧形钢片起到弹簧缓冲垫的作用。
（4）压盘
在每一种压盘总成中，压盘具有相同的特点。它是一块厚厚的铸铁块（以获取最大的吸热效果），它呈圆形并与从动盘具有相同的直径。压盘的一侧加工成平面，该侧将把从动盘的摩擦区压向飞轮。压盘的外侧有各种形状，以便于安装弹簧和分离机构。
（5）操纵机构
操纵机构包括通常被称为分离轴承的球轴承。该轴承安装在一个套筒上，并随这个套筒在一个毂（与变速器前轴承改制成一体）上来回滑动。
分离轴承已在制造厂注入润滑脂，在使用期间无需维修。还有一种分离轴承是石墨型分离轴承。该轴承采用一个石墨圈，从而可以推压一个固定到离合器分离杠杆上的平板。分
离轴承套筒在分离叉即离合器拨叉的作用下移动。分离叉通常支承在球头支销上。回位弹簧的作用是拉动分离叉，使之离开压盘。
（3）离合器工作原理
飞轮、离合器盖、分离杠杆和压盘作为一个部分一起旋转。变速器输入轴和离合器从动盘用花键连接在一起，形成另一个部分。
离合器从动盘只有在挤紧在飞轮与压盘之间时，才会转动（汽车静止）。当分离杠杆拉动压盘，使之离开飞轮后，离合器从动盘才停止不转，而其他的每个零件都继续转动。当压盘重新移向飞轮时，从动盘又被挤紧，从而带动变速器输入轴转动，见图8-2。
2.手动变速器（M/T）
1）变速器速比
现代手动变速器能够为驾驶员提供多达6个前进速比。减速齿轮为1档提供大约3.5:1的速比，为最高档提供大约1.5:1的速比。直接档的速比为1:1。超速档的速比约为0.7:1。
通过在若干速比中进行选择，就可能使汽车在所有的正常情况下工作。另外，通过这些不同的档，转矩又得到放大。不同的汽车，根据发动机功率和车辆重量情况，速比也是变化的。还要用到倒档，倒档的速比通常约为3:1。5速变速器设有超速档。超速档速比加入新型变速器，提高了燃油经济性，降低了排放。
2）变速器构造
一台典型的手动变速器是由变速器箱体、四根轴、轴承、齿轮、同步器和换档机构组成。图8-3给出了四根轴及其齿轮在箱体中的相对位置。
（1）变速器箱体
变速器箱体用于保持变速器齿轮、轴、轴承和垫圈的位置。变速器箱体固定到发动机的后部，或者固定到离合器壳上。许多变速器箱体和离合器壳制成一体。大多数变速器箱体用铸铁或铝制成，并采用一个单独的后壳，来支承输出轴。后壳内还装有车速表传感器齿轮。发动机后支撑通常也装到后壳上。
（2）变速器齿轮
变速器齿轮是由高质量钢制成，经过精心的热处理，从而使轮齿表面平滑、坚硬，而轮齿内部较软、韧性很好。齿轮在赤热状态时下，经过锤锻加工（机械锻造成形）。轮齿以及其他重要区域在精密机床上进行切削加工。
变速器齿轮被加工成直齿型或者斜齿型。斜齿齿轮比较优越，原因在于它同时有多个轮齿接触，不仅运转噪声小，而且坚固耐用。由于斜齿齿形的原因，相啮合的齿轮存在相互分开的趋势，因此，斜齿齿轮必须安装牢固。塔齿轮、其他齿轮和轴的端隙通过采用黄铜和钢推力垫圈加以控制。这些垫圈安装在齿轮轴的端部，位于转动的齿轮与固定的变速器壳之间。
考虑到润滑、膨胀以及可能的尺寸误差，轮齿之间必须留有间隙。这个间隙非常小（千分之几英寸）
（3）同步器
汽车行驶之后，传动系统就会连续不停的带动变速器输出轴转动。结果，滑动齿轮也跟着转动。当企图使滑动齿轮与任何一个塔齿轮（踏下离合器踏板时，就会停止转动）啮合时，轮齿就会受到破坏性的冲击作用。换档时的齿轮撞击声就是来自于滑动齿轮轮齿与塔齿轮轮齿之间的猛烈撞击。
显然，要让一个齿轮与另一个齿轮平稳安静地啮合并且没有损坏，这两个齿轮必须以几乎相同的转速转动。现代手动变速器和变速驱动桥均采用同步器（见图8-4），用内离合装置来防止换档时的齿轮冲击。同步器的作用就是先将一个齿轮移到另一个待啮合齿轮的跟前，然后保持该齿轮不动，并使两个齿轮的转速逐步接近。
汽车专业英语翻译综合
第一章汽车总论 1)Today’s average car contains more than 15,000 separate, individual parts that must work together. These parts can be grouped into four major categories: body, engine, chassis and electrical equipment 。P1 现在的车辆一般都由15000多个分散、独立且相互配合的零部件组成。这些零部件主要分为四类：车身、发动机、底盘和电气设备。 2)The engine acts as the power unit. The internal combustion engine is most common: this obtains its power by burning a liquid fuel inside the engine cylinder. There are two types of engine: gasoline (also called a spark-ignition engine) and diesel (also called a compression-ignition engine). Both engines are called heat engines; the burning fuel generates heat which causes the gas inside the cylinder to increase its pressure and supply power to rotate a shaft connected to the power train. P3 发动机作为动力设备，常见的类型是内燃机，其原理是通过发动机缸内的液体燃料燃烧而产生能量。发动机可分为两类：汽油机（点燃式）和柴油机（压燃式），都属于热力发动机。燃料燃烧产生热量使缸内气压上升，产生的能量驱动轴旋转，并传递给动力传动系。 第二章内燃机 1)Power train system: conveys the drive to the wheels 2)Steering system: controls the direction of movement 3)Suspension system: absorbs the road shocks 4)Braking system: slows down the vehicle P4 传动系把发动机输出的扭矩传递给驱动轮。传动系包括离合器（对应机械变速器）或液力变矩器（对应液力自动变速器）、变速器、驱动轴、主减速器、差速器和驱动桥。 5)Drum brakes have a drum attached to the wheel hub, and braking occurs by means of brake shoes expanding against the inside of the drum. With disc brakes, a disc attached to the wheel hub is clenched between two brake pads. P6 鼓式制动器的制动鼓和轮毂连接，制动蹄张开压紧制动鼓内侧从而产生制动。在盘式制动器上，连着轮毂的制动盘被紧紧夹在两个制动块之间。 1)Linking the piston by a connecting rod to a crankshaft causes the gas to rotate the shaft through half a turn.The power stroke"uses up"the gas,so means must be provided to expel the burnt gas and recharge the cylinder with a fresh petrol-air mixture:this control of gas movement is the duty of the valves;An inlet valve allows the mixture to enter at the right time and an exhaust valve lets out the burnt gas after the gas has done its job . P10 活塞通过连杆和曲轴连接，使得气体带动曲轴旋转半圈。作功冲程耗尽了所有的气体，这样就必须采取相应的措施排出废气并且向气缸内充入新的可燃混合气：气体的运动由气门来控制。进气门使可燃混合气在恰当的时刻进入气缸，排气门使燃烧后的废气排出气缸。 2)The spark-ignition engine is an internal-combustion engine with externally supplied in ignition,which converts the energy cntained in the fuel to kinetic energy.The cycle of operations is spread over four piston strokes. To complete the full cycle it takes two revolutions of the crankshaft. P11 火花点火式发动机是由外部提供点火的内燃机，从而将含在燃料内的能量转化成动能。发动机的一个工作循环分布在活塞的四个行程中，一个完整的工作循环曲轴需要转动两圈。 3)The oil pump in the lubricating system draws oil from the oil pan and sends it to all working parts in the engine. The oil drains off and runs down into the pan. Thus,there is constant circulation of oil between the pan and the working parts of the engine. P15
研究生英语读写译教程1_18单元翻译练习答案
Unit 1 翻译技巧（一） 翻译概述 1.把下面的英语段落翻译成汉语。 没有哪个政治体制是完美的；但是很多美国人都会告诉你，如果他们会嫉妒 我们的一样东西的话，那就是我们英国传统的为期三周的大选，因为它的简洁就 是一种仁慈----是对选民和政治家们双方的仁慈：他们拿它跟美国四年一度的总 统选举中进行的那些耗时几个月的战争相比。 2. 把下面的汉语段落翻译成英语。 Someone has once prophesied that once cigarettes disappear from the surface of the earth, the whole world may be in chaos. This might be an exaggeration, but the danger of smoking should not be underestimated. Smoking is a curse affecting the whole globe. Let’s put foreign countries aside. China alone has hundreds of millions of smokers. Addicted smokers often say that it would be more difficult for them to endure the suffering of two hours without smoking a cigarette than a day without having meals. Smoking pollutes the air and endangers the health, consequently increasing the incidence of lung cancer greatly. Unit 2 翻译技巧(二) 直译与意译 1. 用直译法翻译下列的词语、惯用语和句子： （1）开胃酒（2）水果蛋糕（3）童装（4）人工语言（5）门铃 （6）访问学者（7）走下坡路（8）扣帽子/加标签于某人（9）随大 流（10）overtime pay （11）peanut oil （12）rice flour （13）academic journal （14）woman editor （15） evening paper （16）tear up by the roots
汽车专业英语翻译
About car engine Of all automobile components,an automobile engie is the most complicated assembly with dominant effects on the function of an autombile.So, the engine is generally called the"heat"of an automobile. 在汽车的所有部件中，汽车发动机是最复杂的组件，其对整车性能有着决定性的作用。因而发动机往往被称作发动机的“心脏”。 There are actually various types of engines such as electric motors,stream engines,andinternal combustion engines.The internal combustion engines seem to have almost complete dominance of the automotive field.The internal combustion engine,as its name indicates,burns fuel within the cylinders and converts the expanding force of the combustion into rotary force used to propel the vehicle. 事实上，按动力来源分发动机有很多种，如电动机、蒸汽机、外燃机等。然而内燃机似乎在发动机领域有着绝对的统治地位。就像其字面意思一样，内燃机的染料在气缸内燃烧，通过将燃烧产生气体的膨胀力转换成转动力来驱动发动机前进。 Engine is the power source of the automobile.Power is produced by the linear motion of a piston in a cylinder.However,this linear motion must be changed into rotary motion to turn the wheels of cars or trucks.The puston attached to the top of a connecting rod by a pin,called a piston pin or wrist pin.The bottom of the connecting rod is attached to the crankshaft.The connecting rod transmits the up-and-down motion of the piston to the crankshaft,which changes it into rotary motion.The connecting rod is mounted on the crankshaft with large bearings called rod bearing.Similar bearings, called main bearings,are used to mount the crankshaft in the block. 发动机是整部车的动力来源。能量来自于活塞在气缸内的（往复）直线运动。然而这种（往复）直线运动必须要转换成旋转运动才能驱动车轮。活塞与连杆通过一个销来连接，这个销称为活塞销。连杆的下部连接于曲拐。连杆把活塞的上下往复运动传递给曲拐，从而将往复直线运动转变成旋转运动。连杆和曲拐的连接使用大的轴承，称之为连杆轴承，类似的轴承也用于将曲轴连接到机体，称之为主轴承。 They are generally two different types of cooling system:water-cooling system and air-cooling system.Water-cooling system is more common.The cooling medium, or coolant, in them is either water or some low-freezing liquid, called antifreeze.A water-cooling system consists of the engine water jacket, thermostat, water pump, radiator, radiator cap, fan, fan drive belt and neccessary hoses. 主要有两种类型的冷却系统：水冷和风冷。水冷系统更为普遍。系统所用冷却介质或是冷却液常委水或其他低凝固点液体，称为抗凝剂。一个完整的水冷系统包括机体水套，节温器，水泵，散热器，散热器罩，风扇，风扇驱动皮带和必需的水管。 A water-cooling system means that water is used as a cooling agent to circulate through the engine to absorb the heat and carry it to the radiator for disposal.The ebgine is cooled mainly through heat transfer and heat dissipation.The heat generated by the mixture burned in the engine must be transferred from the iron or aluminum cylinder to the waterin the water jacket.The outside of the water jacket dissipates some of the heat to the air surrounding it, but most of the heat is carried by the cooling water to the radiator for dissipation.When the coolant temperature in the system reaches 90°,the termostat valve open fully, its slanted edge shutting off
汽车专业英语翻译
Unit1 发动机是汽车的心脏。汽车引擎的目的是将燃料转化为能量使汽车移动。最简单的方法是在发动机内部燃烧燃料。,因此,汽车发动机是一种内燃机,缸内燃烧燃料和燃烧的扩张力量转换成旋转力用来驱动汽车。 这里有多种类型的内燃机分为往复式和旋转式引擎;火花式点火或压缩式点火发动机;代用燃料发动机。 往复式发动机 最熟悉的组合是往复式,火花点火,四冲程汽油发动机,如图1-1a所示。现代汽车通常是由水冷活塞式内燃机,安装在汽车的前面,它的力量可以被传送到前轮，传到后轮,或所有车轮轮。一些汽车使用风冷式发动机,但这些通常效率不及液冷式。往复式发动机的另一个主要类型是柴油发动机(如图果1-1b所示),这是使用重型车辆，如卡车，公共汽车和少数家庭轿车。柴油和汽油发动机一般采用四冲程循环。 转子式发动机 转子式内发动机,也叫汪克尔发动机,由德国的Felix~Wankel在1954年开发的,可以提供一种低废气排放和大规模生产的可行性的发动机来替代往复式发动机机。在这种发动机中，三面转子在燃烧室的自由空间内旋转使其随着转子转动压缩和膨胀,见图1 - 2。燃料被吸入、压缩和被点火系统的点燃。膨胀的气体带动转子然后废气排出,如图1 - 3所示。旋转式引擎没有气门,活塞,连杆,往复部件,或曲轴。它提高了马力,基本上不会有震动,但它的油耗是高于传统活塞式发动机。 代用燃料汽车 内燃机消耗大量的石油,并造成严重的空气污染,因此,其他类型的燃料和非常规引擎被研究和发展。 可替代燃料汽车(AFV)是一种用常见的油箱的柔性燃料车辆，设计一种在不同混合的无铅汽油与乙醇或双燃料汽车运行，一种可使用替代燃料和传统燃料。一种高科技车辆(A TV)结合了新引擎,动力传动机构,传动系系统显著提高燃油经济性。最理想的替代燃料发动机燃烧燃料比传统汽油内燃机更为简洁,但仍然能够使用现有的加油站。 混合动力电动车 混合动力汽车或者混合电动汽车(HEV)(如图1 - 4所示),是由两个或两个以上的能源,其中之一是电力可以高英里每加仑，低排放。有两种类型的混合动力汽车,串联和并联式。在串联式电动汽车中,车辆动力所有动力来自同一个源头。例如,一个电动马达驱动的汽车电池和内燃机驱动发电机给电池充电。在并联混合动力,电力是通过这两个路径,电动机和内燃机驱动车辆。这一点,可能有助于电力汽车的电动发动机空转和加速度。内燃机巡航时,驱动传动系和给电池充电。 在当前生产混合动力车发动机和电动马达连接,同样的传播协助下电动引擎可以更小。
研究生英语读写译教程(上)教材答案
Text A词汇答案 Unit 1 A. 1. were bulging with 2. multitude 3. crave 4. indulge in 5. abandon themselves 6. fastidious 7. mused on 8. soothing B. 1. faculty 2. besiege 3. stick to 4. laborious 5. profusion 6. file out 7. judicious 8. decipher 9. poignant 10. by degrees Unit 2 A. 1. annual 2. opponents 3. distinctions 4. ferociously 5. revered 6. overlooks 7. extra 8. celebrity B. 1. constructive 2 transformation 3. combat 4. status 5. severely 6. falling apart 7. effective 8. discouraged 9. cautious 10. wiped out Unit 3 A. 1. borrowings 2. exuberance 3. is flexible 4. instrument 5. diminishing 6. was bound to 7. accumulate 8. dominant B. 1. bound to 2 expansion 3. inclined 4. accumulate 5. conquest 6. stabilization 7. preserve 8. reduce 9. ingratiate 10. dominant
汽车专业英语课文翻译4
Fuel Supply System of Gasoline Engine(UNIT SEVEN) All the gasoline engines have substantially identical fuel systems and run on a mixture consisting of fuel vapor and air. The fuel system comprises the units designed to store, clear and deliver fuel, the units intended to clean air and a unit for preparing a mixture from fuel vapor and air. In a fuel system different components are used to supply fuel from the fuel tank into the engine cylinder. Some of the important components are fuel tank, fuel pump, fuel filter, carburetor, intake manifold and fuellines or tubes connecting the tank, pump and the carburetor. The fuel tank is a fuel container used for storing fuel. It is made of sheet metal. It is attached to the vehicle frame with metal traps and is located at the rear of the vehicle. They are mounted in a boot or boot-floor pan in case of front-engined cars and small commercial vehicles. In order to strengthen the tank as well as to prevent surging of fuel when the vehicle rounds a curve of suddenly stops, baffle plates are attached to the inside of the tank. A cap is used to close the filler opening of the tank. The fuel line is attached at or near the bottom of the tank with a filtering element placed at the connection. The other components of the fuel tank are the fuel gauge sending unit, a vent pipe, receiving unit. To prevent the dirt and water from entering the luggage compartment, a sealing strip is fitted between the fuel tank and boot floor pan. Moreover to limit the transmission of frame distortion to the tank giving rise to squeaking as the metal parts get rubbed together, rubber or felt pads are often fitted between the mountings and the tank. Provision is also made against drumming of the tank by these mountings. The tank may be placed at the side of the chassis frame for convenience in case of large commercial vehicles. The length of the connecting lines or tubes from the tank to the carburetor is also restricted by this at the same time. A porous filter is attached to the outlet lines. By drawing fuel from the tank through the filter, any water in the bottom of the tank as well as any dirt into the fuel gathers on the surface of the filter. To keep the fuel always under atmospheric pressure, the filter pipe or tank is vented. In order to prevent dirt in the fuel from entering the fuel pump or carburetor, fuel filters and screens are used in the fuel system. If the dirt is not removed from the fuel, the normal operation of these units will be prevented. The engine performance will also be reduced.
研究生英语读写译教程 第11-health原文翻译及课后答案
Vocabulary and Structure: Keys to section A: 1. reconciled 2. imperative 3. contradiction 4. existence 5. inherit 6. formidable 7. sensitive8. confess 9. Incidentally 10. conversely Keys to section B: 1. B 2.A 3. A 4.B 5. A 6. A 7. A 8.D 9.B 10.C Keys to close 2. partially 3. linked 5. positive 10. increase 9. impact 1. management 8. tolerance 7. relieve 4. builds 6. reaction Keys to Further Reading 1. C 2. C 3. A 4.D 5. B Translations 1．一位加拿大心理学教授已经鉴定出三种完美主义者：自我要求型（要求自己达到完美），要求他人型（要求别人达到完美）和被要求完美主义者（认为别人要求他们达到完美）。 2．他说完美主义者不仅怀有不现实的高标准，而且认为他们自己和别人都无法达到这些被拔高了的期望。 3．Flett教授认为有些形式的完美主义可能与情绪、身体和情感问题有关，包括抑郁症，饮食紊乱，婚姻不和谐甚至自杀。 4．她说：“我认为在一定程度上这是一个普通的压力问题。完美主义者是压力极大的人。我更愿意从整体的压力方面来看待这个问题，而不是单独从完美主义的角度来考虑。”
汽车专业英语翻译
INTERNAL COMBUSTION ENGINE 引擎燃烧室 1. principle of operation 原理 Engine and power : Engine is used to produce power. The chemical energy in fuel is converted to heat by the burning of the fuel at a controlled rate. This process is called combustion. If engine combustion occurs with the power chamber. ,the engine is called internal combustion engine. If combustion takes place outside the cylinder, the engine is called an external combustion engine. Engine used in automobiles are internal combustion heat engines. Heat energy released in the combustion chamber raises the temperature of the combustion gases with the chamber. The increase in gas temperature causes the pressure of the gases to increase. The pressure developed within the combustion chamber is applied to the head of a piston to produce a usable mechanical force, which is then converted into useful mechanical power. 译: 引擎和能量: 引擎为汽车提供能量，燃料的化学能通过燃烧，转化为热能，这个过程叫燃烧。假如燃烧在燃烧室，这样的发动机叫内燃机。假如燃烧在气缸外，这样的发动机叫外燃机。 用在汽车上的一般是内燃机，热能在燃烧室释放，燃烧室气体温度升高。气体温度的升高使气体的压力曾加，燃烧室内的高压气体作用在活塞头部产生可以利用的化学能，化学能转化为机械能。 Engine T erms : Linking the piston by a connecting rod to a crankshaft causes the gas to rotate the shaft through half a turn. The power stroke “uses up” the gas , so means must be provided to expel the burnt gas and recharge the cylinder with a fresh petrol-air mixture :this control of gas movement is the duty of the valves ;an inlet valve allows the new mixture to enter at the right time and an exhaust valve lets out the burnt gas after the gas has done its job. Engine terms are : TDC(Top Dead Center):the position of the crank and piston when the piston is farther away from the crankshaft. BDC(Bottom Dead Center):the position of the crank and piston when the piston is nearest to the crankshaft. Stroke : the distance between BDC and TDC; stroke is controlled by the crankshaft. Bore : the internal diameter of the cylinder. Swept volume : the volume between TDC and BDC Engine capacity : this is the swept volume of all the cylinder e.g. a four-stroke having a capacity of two liters(2000cm) has a cylinder swept volume of 50cm. Clearance volume: the volume of the space above the piston when it is at TDC. Compression ratio = (swept vol + clearance vol)\(clearance vol) Two-stroke : a power stroke every revolution of the crank.
汽车专业英语课文翻译1
Types of Automobiles(UNITTWO) 汽车的类型 The automobile industry is a fast developing industry. Form the later 18th century when the first automobile was put on road, this industry has developed tremendously. Now there are thousands of factories all over the world manufacturing numerous types of automobiles. This industry employs crores of men and women directly and indirectly in allied industries. The automobile engines are also being used in engine powered machines for agriculture, construction and manufacturing processes. Various types of small engines are also being used in lawn movers, power saws, snow removers and similar equipment. The automobile industry is a developing and demanding industry which does not find its end or saturation point. There is a great demand for varied types of automotive products, vehicles and engines. There is also a great demand for trained and experienced persons in this industry for diagnosing motor vehicle troubles, repairing and replacing engines components, transmissions, propeller shafts, differentials, axles, steering system components, brake system components, suspension components, air conditioners, heaters, body and glass work. 汽车产业是一个迅速发展的行业。形成后18世纪当第一汽车被放在路,这个行业的发展极大。现在有成千上万的工厂世界各地制造许多类型的汽车。这个行业雇佣了卢比的男性和女性直接和间接地在盟军的产业。汽车引擎也被用于发动机动力机器为农业、建筑业和制造业的过程。各种类型的小引擎也被用于草坪搬家公司,电锯,雪消毒剂和类似的设备。汽车行业是一个发展中国家和要求行业没有找到它的结尾或饱和点。有大量需要不同类型的汽车产品,汽车和发动机。还有一个巨大的需求训练和经验丰富的人在这个行业对诊断机动车麻烦、维修和更换引擎组件、变速箱、螺旋桨轴、差异、轴、转向系统组件,制动系统组件,悬挂组件、空调、热水器、身体和玻璃的工作。 There are numerous types of automobiles used in the world. There are in general three main classifications of the various types of vehicles. 有许多类型的汽车在世界上使用。一般有三种主要分类的各种类型的车辆。 The single-unit vehicles or load carriers. 车辆的单件或负载运营商。 Articulated vehicles. 铰接车辆。 The heavy tractor vehicles. 沉重的拖拉机车辆。 Single-unit vehicles are of conventional four-wheel type. The great majority of vehicles are of two axle design, In these vehicles the front axle is a steering non-driving axle and the rear axle is the driving axle. With the passage of time, a great many changes have taken place in the number of axles and the driving arrangements. 单一制车辆四轮类型的传统。绝大多数的车辆被两个轴的设计,在这些车辆前轴是转向非驱动轴和后轴驱动轴。随着时间的流逝,许多变化已经发生轴的数量和驾驶的安排。 In this classification, digital terms like 4×2, 4×4, 6×4etc,are commonly used. The first figure denotes the total number of wheels and the second figure the number of driving wheels. 在这个分类、数字术语像4×2、4×4、6×4等,被普遍使用。第一个图表示轮子的总数和第二
汽车专业英语课程标准
《汽车专业英语》课程标准 一．课程性质与任务 《汽车专业英语》是汽车技术服务与营销专业的一门专业必修课程。随着中国汽车工业的飞速发展，有越来越多的外商进入中国市场，大量的国外汽车信息及汽车资料以及与外商、客户的交流对于我们汽车技术服务与营销专业来说尤为重要，这就需要我们了解、精通、掌握汽车专业通用语言——汽车专业英语。 本课程的主要任务是：本课程针对汽车销售实践中可能遇到的英文资料的类型，如整车性能特点、各系统零部件名称、车主手册等选用有代表性的实例，用英汉对照讲解，并将相关口语交流揉合在实例中，以培养学生汽车专业英文资料的理解能力，并能够用英语进行实际的交流并销售汽车。 二．课程设计思路 近年来，随着经济全球化的日益深入和汽车工业的不断发展，我国人民消费水平的提高以及汽车保有量的逐年增加，进口汽车大量涌入。同时，国内汽车制造业零部件的本土化比例也在不断提升，汽车技术正在迅速地与国际接轨，这就要求汽车专业人员必须具备汽车专业英文资料的阅读理解能力，为此，编者编写了这本《汽车专业英语》。。 本书以实用和交际为目的，把汽车知识和英语技能结合起来，既可供汽车专业人士和管理营销人士阅读和学习，也可作为职业院校学习汽车英语时的教材。本书在选材方面力求涉及面广，既涉及汽车的
发展、文化、环保和安全等方面的科普知识，又涵盖了汽车发动机、底盘等汽车专业知识。把高职高专基础英语教学内容和汽车专业英语课程内容进行科学合理的整合，将常用和实用的专业知识渗透到基础英语中。 每个单元由四个部分组成： （1）听说部分； （2）对话部分； （3）阅读部分（含三篇课文）； （4）相关专业词汇和短语部分。 对话部分涉及汽车销售及售后领域，主要包括客户接待、汽车介绍、价格协商、支付方式、汽车维修等方面；本书阅读部分题材新颖，取材于最新报刊、杂志。 三．课程内容 章节内容建议课时Unit1 TheVehicleworld 4 Unit2 HistoryofAutomobiles 4 Unit3 FamousCars 4 Unit4 CelebritiesintheAutoWorld 4 Unit5 LogosofAutomobiles 4 Unit6 TheProductionofAutomobiles 4 Unit7 TheLifeoftheAutomobiles 4 Unit8 AutomotivePollutionControlandFuel-efficiency 4
汽车专业英语部分翻译
（6）Maintain correct viscosity (free flowing at all temperatures). 保持正确的粘度（在所有温度下自由流动）。 When the brake fluid boils, it becomes vapor. A vapor can be compressed, but a liquid cannot be compressed. Pressing on the brake pedal will compress the vapor in the lines instead of transferring the pressure through the fluid. This can lead to partial or complete braking system failure, sometimes called brake pedal fade. Mountain driving puts increased duty on brakes and brake fluid. The boiling point drops at high altitude. This naturally increases the tendency towards vapor lock. In fact, vapor lock in the hydraulic braking system is the primary reason for brake pedal fade. 当制动液沸腾时，它变成蒸汽。可以压缩蒸汽，但不能压缩液体。按压制动踏板将压缩管线中的蒸汽，而不是将压力传递通过流体。这可能导致部分或完全制动系统故障，有时称为制动踏板褪色。山地驾驶增加了刹车和制动液的使用。沸点在高海拔下降。这自然增加了气体锁定的趋势。事实上，液压制动系统中的汽油锁是制动踏板褪色的主要原因。 Vehicle manufacturers recommend brake fluid that meets or exceeds SAE (Societyof Automotive Engineers)andDOT (Department of Transportation) specifications. 车辆制造商推荐符合或超过SAE（汽车工程师协会）和DOT（运输部）规格的制动液。 Standard brake fluid (DOT 3) is composed chiefly of equal parts of alcohol and castor oil. This combination of fluids works well under normal conditions but it easily boils and becomes a vapor under heavy-duty applications. It also tends to separate when exposed to low temperatures. 标准制动液（DOT 3）主要由酒精和蓖麻油组成。这种流体组合在正常条件下工作良好，但在重载应用下容易沸腾并成为蒸气。暴露于低温时也容易分离。The increasing requirements of brake fluid led to the development of silicone brake fluid,such as DOT 5. This fluid achieved low water pickup and good corrosion protection and also provides good lubrication qualities and rubber compatibility. 制动液的要求越来越高，导致了DOT 5等硅胶制动液的开发。该液体实现了低吸水率和良好的防腐蚀性能，并且还具有良好的润滑性能和橡胶相容性。 5.Brake valves 5.闸阀 There are typically five types of valves in vehicle braking system to adjust the braking force distribution. 车辆制动系统中通常有五种类型的阀门来调节制动力分布。 (1)Metering valve （1）计量阀 Most vehicles that have front disc and rear drum brakes are equipped with metering valve. This metering valve controls, or delays the flow of brake fluid to the front brakes. The rear drum brakes take longer to respond than the front disc brakes. The valve ensures that front disc brake do not act before the rear drum brake. The delays is long enough to allow the rear drum brakes time to react. This delay is particularly necessary during light braking and on slick road surfaces.