Sampling Plan

C=0 Sampling Plan

QMP001020A01 Revision 1

1.1Instructions for C-0 Sampling Plan Use

1.1.1Select the correct AQL level located at the top of the sampling plan.

1.1.2Select the correct lot size located on the left side of the sampling plan.

1.1.3The correct sample size will be located where the lot size and AQL level intersect.

1.1.4Example: Lot size = 50 AQL =

2.5 Sample Size = 5

1.1.5When a “*” is encountered 100% inspection is required.

1.1.6If during the inspection process one nonconformance is encountered, the lot shall be rejected. In all cases the acceptance number is 0

(zero).

Validate Revision by checking QMP001020 Section 5.0.

相关文档
最新文档