焊接专业英语词汇最全版本
焊接专业英语词汇(共10部分)
焊接专业英语词汇(共10部分)
1、熔化焊
熔接fusion welding
压接pressure welding
焊接过程welding process
焊接技术welding technique
焊接工艺welding technology/procedure
焊接操作welding operation
焊接顺序welding sequence
焊接方向direction of welding
焊接位置welding position
熔敷顺序build-up sequence/deposition sequence
焊缝倾角weld slope/inclination of weld axis
焊缝转角weld rotation/angle of rotation
平焊位置flat position of welding
横焊位置horizontal position of welding
立焊位置vertical position of welding
仰焊位置overhead position of welding
平焊downhand welding/flat position welding
横焊horizontal position welding
立焊vertical position welding
仰焊overhead position welding
全位置焊all position welding:熔焊时,焊件接逢所处空间位置包括平焊、横焊、仰焊等位置所进行的焊接。如水平固定管所进行的环缝焊接
向下立焊vertical down welding/downward welding in the vertical position
向上立焊vertical up welding/upward welding in the vertical position
倾斜焊inclined position welding
上坡焊upward welding in the inclined position
下坡焊downward welding in the inclined position
对接焊butt welding
角焊fillet welding
搭接焊lap welding
船形焊fillet welding in the downhand position/fillet welding in the flat position
平角焊horizontal fillet welding
立角焊fillet welding in the vertical position
仰角焊fillet welding in the overhead position
坡口焊groove welding
I形坡口对接焊square butt welding
喇叭形坡口焊flare groove welding
卷边焊flanged edge welding
纵缝焊接welding of longitudinal seam
横缝焊接welding of transverse seam
环缝焊接girth welding/ circumferential
螺旋缝焊接welding of spiral seam/welding of helical seam 环缝对接焊butt welding of circumferential seam
定位焊tack welding
单面焊welding by one side
双面焊welding by both sides
单道焊single pass welding/single run welding
多道焊multi-pass welding
单层焊single layer welding
多层焊multi-layer welding
分段多层焊block sequence/ block welding
分层多道焊multi-layer and multi-pass welding
连续焊continuous welding
断续焊intermittent welding
打底焊backing weld
封底焊back sealing weld
盖面焊cosmetic welding
深熔焊deep penetration welding
摆动焊welding with weaving/weave bead welding
前倾焊foreward welding (英国)/ forehand welding (美国) 后倾焊backward welding(英国)/ backhand welding(美国) 分段退焊backstep welding
跳焊skip welding
对称焊balanced welding/ balanced welding sequence
左焊法leftward welding forehand welding
右焊法rightward welding/backhand welding
挑弧焊whipping method
自动焊automatic welding
手工焊manual welding/hand welding
车间焊接shop welding
工地焊接site welding(英国)/ field welding (美国)
拘束焊接restraint welding
堆焊surfacing/building up/overlaying
隔离层堆焊buttering
端部周边焊boxing/end return
返修焊rewelding
补焊repair welding
塞焊plug welding
槽焊slot welding
衬垫焊welding with backing
焊剂垫焊welding with flux backing
窄间隙焊narrow-gap welding
强制成形焊enclosed welding
脉冲电弧焊pulsed are welding
电弧点焊arc spot welding
螺柱焊stud welding
热风焊hot gas welding
高能焊high grade energy welding
固态焊接solid-state welding
单面焊双面成形one-side welding with back formation 焊接条件welding condition
焊接工艺参数welding parameter
极性polarity
正接electrode negative/straight polarity
反接electrode positive/reversed polarity
运条方式manipulation of electrode
焊接电流welding current
焊接电流增加时间welding current upslope time
焊接电流衰减时间welding current downslope time
电流密度current density
短路电流short circuit current
脉冲电流pulse level/pulse current level
脉冲电流幅值pulse current amplitude
基值电流background level
脉冲频率pulse frequency
脉冲焊接电流占空比duty cycle of pulse duration
电弧电压arc voltage
再引弧电压reignition voltage
焊接速度welding speed
行走速度rate of travel/travel speed
送丝速度wire feed rate
线能量heat input/energy input
热输入heat input
预热preheat
后热postheat
焊后热处理posweld heat treatment/postheat treatment 预热温度preheat temperature
层间温度interpass temperature
焊接终了温度finishing temperature
后热温度postheating temperature
焊丝伸出长度wire extension
弧长arc length
熔化速度melting rate
熔化时间melting time
熔化系数melting coefficient
熔敷速度rate of deposition/deposition rate
熔敷系数deposition coefficient
熔敷效率deposition efficiency
损失系数loss coefficient
飞spatter
飞溅率spatter loss coefficient
融合比fusion ratio
稀释dilution
稀释率rate of dilution
合金过度系数transfer efficiency/recovery (of an element)
坡口groove
坡口面groove face
坡口面角度angle of bevel (英国)/ bevel angle (美国)
坡口角度included angle(英国)/groove angle(美国)
坡口高度groove depth
钝边root face
钝边高度thickness of root face/width of root face
根部间隙root gap(英国)/root opening (美国)
根部半径root radius/groove radius
根部锐边root edge
卷边高度height of flange
卷边半径radius of flange
单面坡口single groove
双面坡口double groove
坡口形式groove type
I形坡口square groove
V形坡口single V groove
Y形坡口single V groove with root face
双Y形坡口double Vgroove with root face
带钝边U形坡口single U groove
带钝边双U形坡口double U groove
VY形坡口single compound angle groove
带钝边J形坡口single J groove
带钝边双J形坡口double J groove
单边V形坡口single bevel groove
双V形坡口double V groove
不对称双V形坡口asymmetric double V groove
双单边V形坡口double bevel groove/K groove
带垫板V形坡口V groove with backing/ single V groove with backing 喇叭形坡口flare groove
锁底坡口single bevel groove with backing locked
坡形板边tapered edge
焊缝weld
接逢seam
焊缝符号welding symbol
焊缝金属weld metal
填充金属filler metal
熔敷金属deposited metal
焊缝表面weld face/ face of weld
焊缝背面back of weld
焊缝轴线axis of weld
焊缝尺寸size of weld
焊缝宽度weld width/ width of weld
焊缝长度weld length/ length of weld
焊缝有效长度effective length of weld
焊缝厚度throat depth/ throat thickness
焊缝计算厚度theoretical throat
焊缝实际厚度actual throat
熔深penetration/ depth of penetration
焊缝成形appearance of weld
焊缝成形系数form factor of weld
余高reinforcement/ excess weld metal
背面余高root reinforcement
削平焊缝flush weld/ weld machined flush
对接焊缝butt weld
角焊缝fillet
焊脚leg/ fillet weld leg
角焊缝断面形状profile of fillet weld
平形角焊缝flat fillet
凸形角焊缝convex fillet weld
凹形角焊缝concave fillet weld
角焊缝凹度concavity
侧面角焊缝side fillet weld/ fillet weld in parallel shear 正面角焊缝front fillet weld/ fillet weld in normal shear 立角焊缝fillet weld in the vertical position
横角焊缝fillet weld in the horizontal position
平角焊缝fillet weld in the flat position
斜角焊缝oblique fillet weld
连续焊缝continuous weld
断续焊缝intermittent weld
连续角焊缝continuous fillet weld
断续角焊缝intermittent fillet weld
交错断续角焊缝staggered intermittent fillet weld
并列断续角焊缝chain intermittent fillet weld
端接焊缝edge weld
卷边焊缝flanged edge weld
塞焊焊缝plug weld
纵向焊缝longitudinal weld
横向焊缝transverse weld
环行焊缝girth weld/ circumferential weld
螺旋形焊缝spiral weld/ helical weld
密封焊缝seal weld
承载焊缝strength weld
联系焊缝connective weld
定位焊缝tack weld
焊道bead/ run/ pass
焊波ripple
焊根weld root/ root of weld
焊趾weld toe/ toe
封底焊道sealing run (after making main weld)/ back weld
打底焊道backing weld (before making main weld)/ back weld 根部焊道root pass/ root run
填充焊道filling bead
盖面焊道cosmetic bead/ cover pass
回火焊道temper bead/ annealing bead
熔透焊道penetration bead
焊层layer
焊接接头welded joint
接头形状joint geometry
等强匹配接头equalmatching weld joint
低强匹配接头undermatching weld joint
超强匹配接头overmatching weld joint
接头根部root of joint
对接接头butt joint
I形对接接头square butt joint
V形对接接头single V butt joint
U形对接接头single U butt joint
J形坡口接头single J butt joint
双V形对接接头double V butt joint
双单边V形对接接头double bevel butt joint/ K groove butt joint 带钝边U形对接接头double U butt joint
带钝边J形坡口接头double J joint
角接接头corner joint
T形接头T joint
斜T形接头inclined T joint
十字接头cruciform joint/ cross-shaped joint
三联接头joint among three members
搭接接头lap joint
套管接头muff joint/ sleeve joint
双盖板接头double strapped joint
盖板接头strapped joint
端接接头edge joint
卷边接头flanged edge joint
锁底对接接头lock butt joint
斜对接接头oblique butt joint
混合接头mixed joint/ composite joint
有间隙接头open joint
无间隙接头closed joint
焊接电弧welding arc
电弧形态arc shape
电弧物理行为arc physics behaviour
引弧striking arc
引弧电压striking voltage
电弧气氛arc atmosphere
阴极cathode
热阴极hot cathode
冷阴极cold cathode
阴极斑点cathode spot
阴极区cathode region
阴极区电场强度intensity of the electric field in the cathode region 阴极压降cathode drop
阳极anode
阳极斑点anode spot
斑点压力spot pressure
阳极区anode region
阳极区电场强度intensity of the electric field in the anode region 阳极压降anode drop
弧柱arc column/ arc stream
弧柱压降voltage drop in arc column
弧柱电位梯度potential gradient in the arc column
弧焰arc flame
弧心arc core
硬电弧forceful arc/ hard arc
软电弧soft arc
旋转电弧rotating arc
脉冲电弧pulsed arc
脉冲喷射电弧pulsed spray arc
起皱现象puckering phenomena
起皱电弧puckering arc
起皱临界电流puckering critical current
间接电弧indirect arc
压缩电弧compressive arc
磁控电弧magnetic controlling arc
电弧力arc force
电磁力electromagnectic force
电磁收缩效应pinch effect
电弧飘移wandering of arc
电弧稳定性arc stability
电弧静特性static characteristic of arc
电弧动特性dynamic characteristic of arc
最小电压原理principle of minimum voltage 电弧挺度arc stiffness
电弧偏吹arc blow
磁偏吹magnetic blow
阴极清理作用cleaning action of the cathode 电弧自身调节arc self-regulation
挖掘作用digging action
极性效应polarity effect
熔滴droplet
熔滴比表面积specific surface of droplet
熔滴过渡metal transfer
过度频率transition frequency
粗滴过渡globular transfer; drop transfer
短路过渡short circuiting transfer
喷射过渡spray transfer
旋转喷射过渡rotating spray transfer
脉冲喷射过渡pulsed spray transfer
爆炸过渡explosive transfer
渣壁过渡flux wall guided transfer
熔池molten pool
沸腾状熔池boiling molten pool
弧坑crater
熔渣slag
渣系slag system
渣系相图slag system diagram
碱性渣basic slag
酸性渣acid slag
碱度basicity
酸度acidity
长渣long slag
短渣short slag
粘性熔渣viscous slag
氧化物型熔渣oxide melting slag
盐型熔渣salt melting slag
盐-氧化物型熔渣salt-oxide melting slag
熔渣流动性fluidity of the slag; slag fluidity 熔渣solidified slag
多孔焊渣porous slag
玻璃状焊渣vitreous slag
自动脱落焊渣self-releasing slag
脱渣性slag detachability
焊接设备welding equipment; welding set
焊机welding machine; welder
电焊机electric welding machine; electric welder
焊接电源welding power source
焊接热循环weld thermal cycle
焊接温度场field of weld temperature; weld temperature field
准稳定温度场quasi-stationary temperature field
焊接热源welding heat source
点热源point heat source
线热源linear heat source
面热源plane heat source
瞬时集中热源instantaneous concentration heat source
热效率thermal efficiency
热能集中系数coefficient of heat flow concentration
峰值温度peak temperature
瞬时冷却速度momentary cooling rate
冷却时间cooling time
置换氧化substitutionary oxydation
扩散氧化diffusible oxydation
脱氧desoxydation
先期脱氧precedent desoxydation
扩散脱氧diffusible desoxydation
沉淀脱氧precipitation desoxydation
扩散氢diffusible hydrogen
初始扩散氢initial diffusible hydrogen
100℃残余扩散氢diffusible hydrogen remained at 100℃
残余氢residual hydrogen
去氢dehydrogenation
去氢热处理heat treatment for dehydrogenation
脱硫desulphurization
脱磷dephosphorization
渗合金alloying
微量合金化microalloying
一次结晶组织primary solidification structure
二次结晶组织secondary solidification structure
联生结晶epitaxial solidification
焊缝结晶形态solidification mode in weld-bead
结晶层状线ripple
多边化边界polygonization boundary
结晶平均线速度mean solidification rate
针状铁素体acicular ferrite
条状铁素体lath ferrite
侧板条铁素体ferrite side-plate
晶界欣素体grain boundary ferrite; polygonal ferrite; pro-entectoid ferrite 粒状贝氏体granular bainite
板条马氏体lath martensite
过热组织overheated structure
魏氏组织Widmannst?tten structure
M-A组元martensite-austenite constituent
焊件失效分析failure analysis of weldments
冷裂判据criterion of cold cracking
冷裂敏感系数cold cracking susceptibity coefficient 脆性温度区间brittle temperature range
氢脆hydrogen embrittlement
层状偏析lamellar segregation
愈合healing effect
断口金相fractography
断口fracture
延性断口ductile fracture
韧窝断口dimple fracture
脆性断口brittle fracture
解理断口cleavage fracture
准解理断口quasi-cleavage fracture
氢致准解理断口hydrogen-embrittlement induced
沿晶断口intergranular fracture
穿晶断口transgranular fracture
疲劳断口fatigue fracture
滑移面断口glide plane fracture
断口形貌fracture apperance
断口试验fracture test
宏观断口分析macrofractography
放射区radical zone
纤维区fibrous zone
剪切唇区shear lip aone
焊接性weldability
使用焊接性service weldability
工艺焊接性fabrication weldability
冶金焊接性metallurgical weldability
热焊接性thermal weldability
母材base metal; parent metal
焊接区weld zone
焊态as-welded (AW)
母材熔化区fusion zone
半熔化区partial melting region
未混合区unmixed zone
熔合区bond area
熔合线weld junction (英);bond line (美)
热影响区heat-affected zone (HAZ)
过热区overheated zone
粗晶区coarse grained region
细晶区fine grained region
过渡区transition zone
硬化区hardened zone
碳当量carbon equivalent
铬当量chromium equivalent
镍当量nickel equivalent
舍夫勒组织图Schaeffler's diagram
德龙组织图Delong’s diagram
连续冷却转变图(CCT图)continuous cooling transformation 裂纹敏感性cracking sensibility
焊接裂纹weld crack
焊缝裂纹weld metal crack
焊道裂纹bead crack
弧坑裂纹crater crack
热影响区裂纹heat-affected zone crack
纵向裂纹longitudinal crack
横向裂纹transverse crack
微裂纹micro-crack; micro-fissure
热裂纹hot crack
凝固裂纹solidification crack
晶间裂纹intercrystalline crack
穿晶裂纹transcrystalline crack
多边化裂纹polygonization crack
液化裂纹liquation crack
失延裂纹ductility-dip crack
冷裂纹cold crack
延迟裂纹delayed crack
氢致裂纹hydrogen-induced crack
焊道下裂纹underbead crack
焊根裂纹root crack
焊趾裂纹toe crack
锯齿形裂纹chevron cracking
消除应力处理裂纹stress relief annealing crack (SR crack) 再热裂纹reheat crack
焊缝晶间腐蚀weld intercryctalline corrosion
刀状腐蚀knife line attack
敏化区腐蚀weld decay
层状撕裂lamellar tearing
焊接性试验weldability
裂纹试验cracking test
IIW裂纹试验IIW cracking test
Y形坡口裂纹试验slit type cracking test
分块形槽热裂纹试验segmented circular groove cracking test H形裂纹试验H-type cracking test
鱼骨形裂纹试验fishbone cracking test
指形裂纹试验finger (cracking) test
T形裂纹试验Tee type cracking test
环形槽裂纹试验circular-groove cracking test
可调拘束裂纹试验varestraint test
BWRA奥氏体钢裂纹试验BWRA cracking test for austenitie steel
圆棒裂纹试验bar type cracking test; round bar cracking test
里海裂纹试验Lehigh restraint cracking test
圆形镶块裂纹试验circular-path cracking test
十字接头裂纹试验cruciform cracking test
Z向窗口拘束裂纹试验Z-direction window type restraint cracking test G-BOP焊缝金属裂纹试验G-BOP weld metal crack test
巴特尔焊道下裂纹试验Battelle type underbead cracking test
U形拉伸试验U-tension test
缪雷克期热裂纹试验Murex hot cracking test
菲斯柯裂纹试验FISCO (type) cracking test
CTS裂纹试验controlled thermal severity
拉伸拘束裂纹试验(TRC试验)tensile restraint cracking test
刚性拘束裂纹试验(RRC试验)rigid restraint cracking test
插销试验implant test
Tigamajig 薄板焊接裂纹试验Tigamajing thin plate cracking test
焊道纵向弯曲试验longitudinal-bead test
柯麦雷尔弯曲试验Kommerell bead bend test
肯泽尔弯曲试验Kinzel test
缺口弯曲试验notch bend test
热朔性试验hot-ductility test
热影响区冲击试验impact test of HAZ
热影响区模拟试验synthetic heat-affected zone test
最高硬度试验maximum hardness test
落锤试验NRL (Naval Research Laboratory)
测氢试验Hydrogen test
焊接材料
电极
焊接材料welding consumables
电极electrode
熔化电极consumable electrode
不熔化电极nonconsumable electrode
钨电极tungsten electrode
焊丝welding wire. Welding rod
实心焊丝solid wire
渡铜焊丝copper-plating welding wire
自保护焊丝self-shielded welding wire
药芯焊丝flux-cored wire
复合焊丝combined wire
堆焊焊丝surfacing welding rod
填充焊丝filler wire
焊条electrode/ covered electrode
焊芯core wire
药皮coating (of an electrode)/ covering (of an electrode)
涂料coating flux/coating material
造气剂gas forming constituents
造渣剂slag forming constituents
合金剂alloying constituent
脱氧剂dioxidizer
稳弧剂arc stabilizer
粘接剂binder
水玻璃water glass
水玻璃模数modules of water glass
酸性焊条acid electrode
高钛型焊条high titania (type) electrode
钛钙型焊条lime titania type electrode
钛铁矿形焊条ilmenite type electrode
氧化铁型焊条iron oxide type electrode/ high iron oxide type electrode
高纤维素型焊条high cellulose (type) electrode
石墨型焊条graphite type electrode
碱性焊条basic electrode/ lime type covered electrode
低氢型焊条low hydrogen type electrode
高韧性超低氢焊条high toughness super low hydrogen electrode
奥氏体焊条austenitic electrode
铁素体焊条ferritic electrode
不锈钢焊条stainless steel electrode
珠光体耐热钢焊条pearlitic heat resistant steel electrode
低温钢焊条low temperature steel electrode/ steel electrode for low temperature 铝合金焊条aluminum alloy arc welding electrode
铜合金焊条copper-alloy arc welding electrode
铜芯铸铁焊条cast iron electrode with steel core
纯镍铸铁焊条pure nickel cast iron electrode
球墨铸铁焊条electrode for welding spheroidal graphite cast iron
铸芯焊条electrode with cast core wire
镍基合金焊条nickel base alloy covered electrode
蒙乃尔焊条Monel electrode
纯铁焊条pure iron electrode
渗铝钢焊条alumetized steel electrode
高效率焊条high efficiency electrode
铁粉焊条iron powder electrode
底层焊条backing welding electrode
深熔焊条deep penetration electrode
重力焊条gravity electrode
立向下焊条electrode for vertical down position welding
节能焊条saving energy electrode
水下焊条underwater welding electrode
耐海水腐蚀焊条seawater corrosion resistant steel electrode
低尘低毒焊条low-fume and harmfulless electrode/
low-fume and low-toxic electrode
堆焊焊条surfacing electrode
耐磨堆焊焊条hardfacing electrode
钴基合金堆焊焊条cobalt base alloy surfacing electrode
碳化钨堆焊焊条tungsten carbide surfacing electrode
高锰钢堆焊焊条high manganese steel surfacing electrode
双芯焊条twin electrode
绞合焊条stranded electrode
编织焊条braided electrode
双层药皮焊条double coated electrode
管状焊条flux-cored electrode
气渣联合保护型药皮semi-volatile covering
焊条工艺性usability of the electrode/ technicality of the electrode
焊条使用性running characteristics of an electrode/ operating characteristics of an ele ctrode
焊条熔化性melting characteristics of an electrode
焊条直径core diameter
焊条偏心度eccentricity (of an electrode)
药皮重量系数gravity coefficient of coating
焊条药皮含水量percentage of moisture for covering
焊条夹吃持端bare terminal (of an electrode)
焊条引弧端striking end (of an elcetrode)
焊剂welding flux/ flux
熔炼焊剂fused flux
粘结焊剂bonded flux
烧结焊剂sintered flux/ agglomerated flux
窄间隙埋弧焊焊剂flux for narrow-gap submerged arc welding
低氢型焊剂low hydrogen type flux
高速焊剂high speed welding flux
无氧焊剂oxygen-free flux
低毒焊剂low poison flux
磁性焊剂magnetic flux
电弧焊arc welding
直流电弧焊direct current arc welding
交流电弧焊alternating current arc welding
三相电弧焊three phase arc welding
熔化电弧焊arc welding with consumable
金属极电弧焊metal arc welding
不熔化极电弧焊arc welding with nonconsumable
碳弧焊carbon arc welding
明弧焊open arc welding
焊条电弧焊shielded metal arc welding (SMAW)
重力焊gravity welding
躺焊fire cracker welding
电弧堆焊arc surfacing
自动堆焊automatic surfacing
躺板极堆焊surfacing by fire cracker welding
带极堆焊surfacing with band-electrode
振动电弧堆焊vibratory arc surfacing
耐磨堆焊hardfacing
埋弧焊submerged arc welding (SAW)
多丝埋弧焊multiple wire submerged arc welding
纵列多丝埋弧焊Tandem sequence (submerged-arc welding)
横列多丝埋弧焊series submerged arc welding (SAW-S)
横列双丝并联埋弧焊transverse submerged arc welding
热丝埋弧焊hot wire submerged-arc welding
窄间隙埋弧焊narrow-gap submerged arc welding
弧压反馈电弧焊arc voltage feedback controlling arc welding
自调节电弧焊self-adjusting arc welding
适应控制焊接adaptive control welding
焊剂层burden; flux layer
气体保护电弧焊gas shielded arc welding
保护气体protective atmosphere
惰性气体inert-gas
活性气体active-gas
惰性气体保护焊inert-gas (arc) welding
氩弧焊argon arc welding
熔化极惰性气体保护电弧焊metal inert-gas arc welding
钨极惰性气体保护电弧焊tungsten inert-gas arc welding
钨极氢弧焊argon tungsten arc welding
脉冲氢弧焊pulsed argon arc welding
熔化极脉冲氢弧焊argon metal pulsed arc welding
钨极脉冲氢弧焊argon tungsten pulsed arc welding
热丝MIG焊hot wire MIG welding
热丝TIG焊hot wire TIG welding
氨弧焊helium-arc welding
活性气体保护电弧焊metal active-gas arc welding
混合气体保护电弧焊mixed gas arc welding
二氧化碳气体保护电弧焊carbon-dioxide arc welding; CO2 arc welding 细丝CO2焊CO2 arc welding with thin wire
粗丝CO2焊CO2 arc welding with thick wire
磁性焊剂CO2焊unionarc welding
药芯焊丝CO2焊arcos arc process; dual shield arc welding 气电立焊electrogas (arc) welding
氮弧焊nitrogen-arc welding
水蒸气保护电弧焊water vapour arc welding
原子氢焊atomic hydrogen welding
冲器室中电弧焊controlled atmosphere arc welding
旋转电弧焊rotating arc welding
短路过渡电弧焊short circuiting arc welding
焊丝横摆频率weaving speed of wire
焊丝停摆时间electrode keep time of slider
等离子弧焊plasma arc welding (PAW)
等离子弧plasma arc
等离子流plasma jet
转移弧transferred arc
非转移弧nontransferred arc
联合型等离子弧combined plasma arc
主弧main arc
维弧pilot arc
维弧电流pilot arc surrent
双弧现象double arcing
双弧临界电流critical current of double arcing
等离子弧焊枪plasma (welding) torch
压缩喷嘴constricting nozzle
单孔喷嘴single port nozzle
多孔喷嘴multiport nozzle
压缩喷嘴孔径orifice diameter
孔道长度orifice throat length
孔道比orifice throat ratio
等离子气plasma gas; orifice gas
电极内缩长度electrode setback
小孔效应keyhole effect
小孔型等离子弧焊keyhole-mode welding
熔透型等离子弧焊fusion type plasma arc welding
大电流等离子弧焊high-current plasma arc welding
中电流等离子弧焊intermediate-current plasma arc welding 小电流等离子弧焊low-current plasma arc welding
微束等离子弧焊micro-plasma arc welding
交流等离子弧焊AC plasma arc welding
脉冲等离子弧焊pulsed plasma arc welding
等离子弧堆焊plasma arc surfacing
热丝等离子弧堆焊hot wire plasma arc surfacing
粉末等离子弧堆焊plasma arc powder surfacing
等离子-熔化极惰性气体保护电弧焊plasma MIG welding
转移弧电源transferred arc power supply
非转移弧电源nontransferred arc power supply
电弧焊设备arc welding equipment
电弧焊机arc welding machine
直流弧焊机DC arc welding machine
交流弧焊机AC arc welding machine
交直流两用弧焊机AC/DC arc welding machine
单站弧焊机single operator arc welding machine
多站弧焊机multi-operator arc welding set
固定式弧焊机stationary arc welding machine
移动式弧焊机portable arc welding machine
台式弧焊机bench arc welding machine
内燃机驱动式弧焊机combustion engine driven arc welding set
电动机驱动式弧焊机motor driven arc welding set
熔化极弧焊机arc welding machine using a consumable electrode
不熔化极弧焊机arc welding machine using a non-consumable electrode
脉冲弧焊机pulsed arc welding machine
气体保护弧焊机gas shielded arc welding machine
氩弧焊机argon arc welding machine
二氧化碳弧焊机CO2 arc welding machine
钨极惰性气体保护弧焊机tungsten inert-gas welding machine
熔化仍惰性气体保护弧焊机metal inert-gas welding machine
气电立焊机electrogas (arc) welding machine
等离子弧焊机plasma arc welding machine
微束等离子弧焊机micro-plasma welding equipment
原子氢焊机atomic hydrogen welding apparatus
埋弧焊机submerged arc welding machine
弧焊电源arc welding power source
直流弧焊电源DC arc welding power source
交流弧焊电源AC arc welding power source
交直流两用弧焊电源AC/DC arc welding power source
脉冲弧焊电源pulsed arc welding power source
上升特性弧焊电源rising characteristic arc welding power source
平特性弧焊电源constant –voltage arc welding power source
下降特性弧焊电源dropping characteristic arc welding power source
垂降特性弧焊电源constant-current arc welding power source
多特性弧焊电源slope-controlled arc welding power source
逆变式焊接电源inverter welding power source
晶体管弧焊电源transistor arc welding power source
电源动特性dynamic characteristic
电源外特性external characteristic
弧焊变压器arc welding transformer
弧焊整流器arc welding rectifier
硅弧焊整流器silicon arc welding rectifier
晶闸管弧焊整流器SCR arc welding rectifier; arc welding silicon controlled rectifier
脉冲弧焊整流器pulsed arc welding rectifier
弧焊发电机arc welding generator
焊车welding tractor
焊接机头welding head
行走机构traveller
送丝机构wire feeder
等速送丝方式constant wire-feed system
变速送丝方式alternate wire-feed system
跟踪装置tracer
焊丝盘wire reel
焊钳electrode holder
焊枪welding gun
电极夹electrode holder
导电嘴tip; contact tube
喷嘴nozzle
焊剂漏斗flux-hopper
高频振荡器oscillator; HF unit
脉冲引弧器pulsed arc starter; surge injector
脉冲稳弧器pulsed arc stabilizer
脉冲激弧器pulsed arc exciter
输出电抗器out put reactor
镇定变阻器ballast rheostat
直流分量抑制器direct current suppressor
焊接回路welding circuit
额定焊接电流rated welding current
焊接电流调节范围range of welding current regulation 空载电压open circuit voltage(no load voltage)
约定负载电压conventional load voltage
负载持续率duty cycle
额定负载持续率rated duty cycle; standard service
手工弧焊机manual arc welding machine
电焊渣electroslag welding (ESW)
手工电渣焊manual electroslag welding
丝极电渣焊electroslag welding with wire electrode
板极电渣焊electroslag welding with plate electrode
熔嘴电渣焊electroslag welding with consumable nozzle 管极电渣焊electroslag welding with tube electrode
窄间隙电渣焊narrow-gap electroslag welding
电渣堆焊electroslag surfacing
电渣焊机electrosalg welding machine
熔嘴consumable nozzle; consumable wire
钢档板steel shoe (
钢冷却板Cu-cooling plate
铜滑板copper shoe
渣池slag bath
渣池深度depth of slag bath
渣池电压voltage of slag bath
电渣过程稳定性electroslag process stability
焊丝间距distance between welding wires
电子束焊electron beam welding (EBW)
脉冲电子束焊pulsed electron beam welding
加速电压acceleration voltage/ operating voltage
电子束电流beam current
电子束功率beam power
电子束功率密度beam power density
焦点focal spot
焦距focal length
工作距离work distance
电子束焊机electron beam welding machine
高真空电子束焊机full vacuum electron beam welder
低真空电子束焊机partial vacuum electron beam welder 非真空电子束焊机nonvacuum electron beam welder
真空度vacuum
电子枪electron gun
二极电子枪diode gun
三极电子枪triode gun
偏压电极bias electrode
电磁透镜electromagnetic lens
电子束偏转线圈electron beam deflection coils
导流系数perveance
钉尖spiking
激光焊laser welding/ laser beam welding
连续激光焊continuous laser welding
脉冲激光焊impulsed laser welding
激光焊机laser welding equipment
气体激光器gas laser
固体激光器solid laser
焦斑直径focussed diameter of the beam
离焦量clearance between focal point and (plate) surface 焊缝深宽比weld seam depth-to-width ratio
3、气焊、热剂焊、水下焊
gas welding
氧乙炔焊oxy-acetylene welding
氢氧焊oxy-hydrogen welding
空气乙炔焊air-acetylene welding
氧乙炔焊oxy-acetylene flame
氢氧焰oxy-hydrogen flame
氧煤气焰oxy-coal gas flame
焊接火焰welding flame
混合比mixing ratio
混合气体可燃范围inflammable limit of the gaseous 一次燃烧primary combustion
二次燃烧secondary combustion
燃烧速度combustion rate
燃烧强度combustion intensity
火焰热效率flame heating efficiency
焰芯inner cone; flame cone
内焰internal flame
外焰flame envelope
中性焰neutral flame
氧化焰oxidizing flame
碳化焰carburizing flame
回火flashback
逆火backfire
回烧flashback
气体发生速度gasification speed
焊炬torch; blow pipe
等压式焊炬balanced pressure torch
射吸式焊炬injector torch
氧乙炔焊炬oxy-acetylene torch
焊割两用炬combined cutting and welding torch
混合室mixing chamber
喷射器injector
焊嘴welding nozzle; welding tip
液氧气化器oxygen evaporator
气瓶gas cylinder
乙炔瓶acetylene cylinder
阀罩cylinder cap
气瓶阀cylinder valve
汇流排cylinder manifold
减压器pressure regulator; gas regulator
单级减压器single stage regulator
两级减压器two stage regulator
回火防止器flashback arrestor
常用焊接英语词汇大全
常用焊接英语词汇大全 焊接机器人welding robot 点焊机器人spot welding robot 弧焊机器人arc welding robot 切割机器人cutting robot 焊接机器人生产线robot line for welding 焊接机器人工作站welding robot station 机器人运动自由degree of free for robot 机器人工作空间robot working space 波峰钎焊flow soldering/ wave soldering 分级钎焊step brazing/ step soldering 不等间隙钎焊brazing with the unparalleled clearance 红外线钎焊infra-red brazing (soldering) 光束钎焊light soldering (brazing) 激光钎焊laser brazing (soldering) 电子束钎焊electron beam brazing 钎接焊braze-welding 钎料brazing filler metal/ solder 硬钎料brazing filler metal 软钎料solder (m) 自钎剂钎料self-fluxing brazing alloy/ self-fluxing filler metal 活性钎料active filler metal/ active metal brazing alloy 成形钎料preformed filler metal/ solder preform 非晶态钎料amorphous filler metal 粉状钎料powdered filler metal 钎料膏braze cream/ braze paste/ solder cream/ solder paste 药皮钎料flux coated brazing(soldering)rod 层状钎料sandwich filler metal 药芯钎料丝flux-cored colder wire 敷钎料板clad brazing sheet 钎剂brazing flux; soldering flux 气体钎剂gas flux 反应钎剂reaction flux 松香钎剂colophony flux; rosin flux 钎剂膏flux paste 阻流剂stopping-off agent 钎剂活性flux activity 钎剂活性温度范围activation temperature range of flux 钎剂热稳定性thermal stability of flux 钎焊过程brazing (soldering) process 钎焊操作brazing (soldering) operation
焊接专业术语中英文对照整理
机械——焊接专业术语中英文对照 (郭运)整理 1Single 单面的 2V—groove V型坡口 3Joint 焊接接头 4Edges overlap 接头形式 5Butt 对接 6T T型焊接 7Fillet 角焊缝 8Edge 端接 9Corner 角接 10Radius 半径 11Joint root 焊接根部 12Bevel angle 削边角度 13Groove angle 坡口角度 14Root face 根部钝边 15Groove face 坡口面 16Plug weld 塞焊 17Spot weld 点焊 18Seam weld 缝焊 19Slot weld 槽焊 20Double—flare—bevel—groove K型坡口焊缝
21Single—flare—V 单面V型22Edge flange 翻边端接 23Corner flange 卷边端接 24Flange weld 卷边焊缝25Flare weld 扩口焊缝26Fillet weld 角焊缝 27Slot weld 槽焊缝 28Spot weld 点焊缝 29Surfacing weld 堆焊焊缝30Melt—through weld 熔透焊缝31Backing weld 打底焊缝32Back weld 背面焊缝33Root weld 根部焊缝34Crown weld 隆起部分35Weld reinforcement 焊缝加强36Weld face 焊缝表面37Cap pass 盖面焊道38Weld edge 焊缝边缘39Leg 焊脚 40Toe 焊趾 41Buildup 堆焊 42Weld reinforcement 焊缝加强高
焊接专用英文词汇
焊接专用英文词汇 1.1 焊接方法 焊接方法与设备(Welding process& facility) 手工电弧焊(MAW:manual arc welding) 电弧焊(arc welding)埋弧电弧焊(SAW:submerged arc welding)气焊(gas welding)氩弧焊(argon arc welding) 气体保护电弧焊 CO2保护焊(CO2 shielded arc welding) 熔化焊(GMAW—gas metal arc welding) fusion welding 电渣焊(ESW—electroslag welding) 激光焊(LW—laster welding) 等离子焊(PAW—plasma arc welding) 摩擦焊(FRW—friction welding) 焊接压力焊超声波焊(UW—ultrasonic welding) welding pressure welding 冷压焊(CPW—cold pressure welding)锻焊(FW—forge-welding)对焊butt welding 电阻焊(RW—resistance welding) 缝焊seam welding 点焊spot welding 烙铁钎焊 iron soldering 火焰钎焊 torch brazing/ torch soldering 钎焊炉中钎焊 furnace brazing/ furnace soldering soldering/brazing 盐浴钎焊 saltbath dip brazing (soldering) 真空钎焊 vacuum brazing 堆焊 overlaying welding 平焊 downhand welding/flat welding 横焊 horizontal welding 立焊 vertical welding 仰焊 overhead welding 全位置焊 all position welding/positional welding 半自动电弧焊 Semi-automatic arc welding 钨极惰性气体保护电弧焊 (TIG) tungsten inert-gas arc welding 熔化极惰性气体保护电弧焊(MIG)metal inert-gas arc welding 1.2 焊接设备 电弧焊机 arc welding machine 直流弧焊机 DC arc welding machine 交流弧焊机 AC arc welding machine 交直流两用弧焊机 AC/DC arc welding machine 氩弧焊机 argon arc welding machine 二氧化碳弧焊机 CO2 arc welding machine 埋弧焊机 submerged arc welding machine 焊接机头 welding head 行走机构 traveller 送丝机构 wire feeder 焊丝盘 wire reel
焊接英文词汇--有用
焊接英文词汇 BPS---钎接工艺规程 PQR---钎接工艺评定纪录 SWPS---标准焊接工艺规程 WPS---welding procedure specification焊接工艺规程 Hard conversion---近似转换 Soft conversion---精确转换 ASNT---American Society of Nondestructive Testing 美国无损检测学会Arc seam weld---点弧焊焊缝 Arc spot weld---点弧焊点 Arc welding---弧焊 As-brazed---钎接焊 As-welded---焊态 Back gouging---背面清根 Backhand welding---右焊法 Backing---衬垫 Backing gas---背面保护气 Base metal---母材 Bond line—熔合线 Braze---钎接接头 Brazer---钎接工 Brazing, automatic---自动钎接 Brazing, block (BB)---加热块钎接 Brazing, dip (DB)---浸沾钎接 Brazing, furnace (FB)---炉中钎接 Brazing, induction (IB)---感应钎接 Brazing, machine---机动钎接 Brazing, manual---手工钎接 Brazing, resistance (RB)---电阻钎接 Brazing, semiautomatic---半自动钎接 Brazing, torch (TB) ---火焰钎接 Brazing, temperature range---钎接温度范围 Built-up of base metal---母材补焊 Butt joint---对接接头 Buttering---堆焊隔离层 Clad brazing sheet---敷钎料板 Coalescence---接合 Complete fusion---完全熔合 Composite---复合材料 Consumable insert---可熔化嵌条 Contact tube---导电咀 Corner joint---角接接头 Coupon---试件 Crack---裂纹
常用焊接术语中英文对照
常用焊接术语中英文对照 焊接Welding 10.1 焊接种类Varieties of Welding 电弧焊arc welding 电熔焊electric fusion welding (EFW) 气熔焊fusion gas welding (FGW) 电阻焊electric resistance welding (ERW) 有保护的金属电弧焊shielded metal arc welding (SMAW) 手工或自动隋性气体保护钨极电弧焊manual and automatic inert gas tungsten arc welding (GTAW) 自动埋弧焊automatic submerged arc welding 金属极隋性气体保护电弧焊gas metal arc weiding (GMAW) 氩弧焊argon-arc welding, 气体保护电弧焊gas-shielded arc welding 气焊gas welding; flame welding 等离子焊plasma welding 硬钎焊braze welding 电渣焊electroslag welding 爆炸焊explosive welding 10.2 焊接形式Type of Welding
角焊fillet welding 间断焊intermittent welding 点焊spot welding 对焊butt welding 搭焊lap welding 塞焊plug welding 珠焊bead welding 槽焊slot welding 堆焊build up welding 垫板焊backing weld 坡口groove V形坡口V groove 单面U形坡口single U groove K形坡口double bevel groove X形坡口double V groove 双面U形坡口double U groove U-V组合坡口combination U and V groove 根部间隙root gap 焊接符号symbol of weld 错边量alignment tolerance 10.3 焊接位置Welding Position 仰焊overhead welding 现场焊field weld (F.W.)
焊接专业英语词汇(通用部分)
焊接专业英语词汇(通用部分) acetylene 乙炔am pere 电流安培 angle welding 角焊arc 电弧 argon arc welding 氩弧焊接bare electrode 光熔接条 butt welding 对接焊接cam ber 电弧弯曲 cascade 阶叠熔接法clad weld 被覆熔接 crator 焊疤excess m etal 多余金属 filler rod 焊条fillet weld 填角焊接 gas shield 气体遮蔽groove welding 起槽熔接 hand face shield 手握面罩hard facing 硬表面堆焊 jig welding 工模焊接laser beam welding 雷射光焊接 metal electrode insert gas welding MIG熔接nugget 点焊熔核overlaying 堆焊peening of welding 珠击熔接法 plug welding 塞孔熔接positioned welding 正向熔接 pressure welding 压焊propane gas cutting 丙烷气切割 pure nickel electrode 纯镍熔接条reinforcem ent of weld 加强焊接resist 抗蚀护膜root running 背面熔接 seam焊缝seaming 接合 seam welding 流缝熔接series seam welding 串联缝熔接 skip welding process 跳焊法spark 火花 spot welding 点焊接stitch welding 针角焊接 stud arc welding 电弧焊接under laying 下部焊层 void 焊接空隙weld flow m ark 焊接流痕 weld flush 焊缝凸起weld line 焊接纹 weld m ark 焊接痕weld penetration 熔接透入 weld zone 焊接区welding 焊接 welding bead 焊接泡welding direction 焊接方向 welding distortion 焊接变形welding flux 焊剂 welding ground 电熔接地welding interval 焊接周期 welding stress 熔接应变welding torch 熔接气炬 welding electrode production line 电焊条生产线 welding electrode 焊条 welding fixture 焊接夹具 welding generator 电焊机 welding goggles 焊工护目镜 welding gun 焊枪 welding helmet 电焊帽 welding inspection ruler 焊接检验尺 welding machine 焊接机 welding mill 焊管机 welding motor generator 电动焊接发电机 welding nozzle 焊嘴 welding paste 焊接药膏
焊接专业英语词汇(熔化焊)
2006-09-02 | 焊接专业英语词汇(熔化焊) 熔接fusion welding 压接pressure welding 焊接过程welding process 焊接技术welding technique 焊接工艺welding technology/procedure 焊接操作welding operation 焊接顺序welding sequence 焊接方向direction of welding 焊接位置welding position 熔敷顺序build-up sequence deposition sequence 焊缝倾角weld slope/inclination of weld axis 焊缝转角weld rotation/angle of rotation 平焊位置flat position of welding 横焊位置horizontal position of welding 立焊位置vertical position of welding 仰焊位置overhead position of welding 平焊downhand welding/flat position welding 横焊horizontal position welding 立焊vertical position welding 仰焊overhead position welding 全位置焊all position welding:熔焊时,焊件接逢所处空间位置包括平焊、横焊、仰焊等位置所进行的焊接。如水平固定管所进行的环缝焊接 向下立焊vertical down welding/downward welding in the vertical position 向上立焊vertical up welding/upward welding in the vertical position 倾斜焊inclined position welding 上坡焊upward welding in the inclined position 下坡焊downward welding in the inclined position 对接焊butt welding 角焊fillet welding 搭接焊lap welding 船形焊fillet welding in the downhand position/fillet welding in the flat position 平角焊horizontal fillet welding 立角焊fillet welding in the vertical position 仰角焊fillet welding in the overhead position 坡口焊groove welding I形坡口对接焊square butt welding 喇叭形坡口焊flare groove welding 卷边焊flanged edge welding 纵缝焊接welding of longitudinal seam 横缝焊接welding of transverse seam 环缝焊接girth welding/ circumferential
工程焊接英语(整理版)
术语和定义 A Alloy [?l?i] flux [fl?ks] 合金焊剂对焊缝金属合金成分起主要决定作用的焊剂。 all-weld-metal [metl] test specimen [spesim?n] 全焊缝金属试样完全由焊缝金属组成的缩减断面试样。 arc [ɑ:k] gouging [ɡaud?i?] 电弧刨槽用电弧切割方法形成斜面或坡口的热刨槽。 as-welded 焊后状态(焊态)焊后未经任何热处理、力学或化学处理的焊缝金属、焊接接头和焊件的状态。 automatic [?:t?m?tik] welding 自动焊接用设备进行的焊接,焊接中仅需偶然照看或根本无需照看,并且不需手工调节设备的控制。这一术语的变化形式有:自动硬钎焊,自动软钎焊,自动热切割和自动热喷涂。 auxiliary [?:ɡzilj?ri] attachments [?t?t?m?nt] 辅助附件用焊接办法附加于主要的承受应力部件上的部件或附件,这种部件可以或无需承受荷载。 axis [?ksis]of a weld. 焊缝轴线见weld axis。 B backgouging 清根从已焊接头焊缝根部一面清除焊缝金属和母材金属,以便于接着从该面施焊时完全熔合和接头完全熔透。backing 衬垫紧靠接头背面放置的、或者放置在电渣焊和气电焊焊缝两侧的材料或器件,用以承托和保持熔化的焊缝金属。焊接时,这种材料可以部分熔化或者不发生熔化,其材质既可以是金属,也可以是非金属。 backing pass 背部焊道背部焊缝的焊道。 backing ring 衬环环形衬垫,一般用于管材的焊接。 backing weld 打底焊缝焊缝形式的衬垫。 backup weld (tubular[tju:bjul?] structures[str?kt??]) 打底焊道(管结构)仅从一面施焊的接头完全熔透(CJP)坡口焊缝的初始封焊焊道。用作后续焊道的衬垫,但不视为理论焊缝的一部分。 back weld 背部焊缝施焊于单面坡口焊缝背部的焊缝。 base metal 母材被焊接、硬钎焊、软钎焊或切割的金属或合金。 bevel[bev?l] angle[??ɡl] 坡口面角度接头构件的坡口斜面与垂直于构件表面的平面之间的夹角。 box tubing[tju:bi?] 箱形管正方形或矩形横截面的管材产品。见Tubular。 brace intersection[int?sek??n] angle, θ(tubular structure) 支管交角θ(管结构)支管中心线之间形成的锐角。 building code 建筑规范本规范中用到建筑规范这一术语时,指的是本规范适用的建筑法律或规定,或其他的建造条例。当缺少任何当地适用的建筑法律或规定,或其他建造条例时,则建议建造应符合美国钢结构学会(AISC)的建筑用结构钢设计、制作和安装的技术条件。 butt joint
常用焊接中英文词语翻译
常用焊接中英文词语翻译焊接热源welding heat source 点热源point heat source 线热源linear heat source 面热源plane heat source 瞬时集中热源instantaneous concentration heat source 热效率thermal efficiency 热能集中系数coefficient of heat flow concentration 峰值温度peak temperature 瞬时冷却速度momentary cooling rate 冷却时间cooling time 置换氧化substitutionary oxydation 扩散氧化diffusible oxydation 脱氧desoxydation 先期脱氧precedent desoxydation 扩散脱氧diffusible desoxydation 沉淀脱氧precipitation desoxydation 扩散氢diffusible hydrogen 初始扩散氢initial diffusible hydrogen 100 C 残余扩散氢diffusible hydrogen remained at 100 °C 残余氢residual hydrogen 去氢dehydrogenation
去氢热处理heat treatment for dehydrogenation 脱硫desulphurization 脱磷dephosphorization 渗合金alloying 微量合金化microalloying 一次结晶组织primary solidification structure 二次结晶组织secondary solidification structure 联生结晶epitaxial solidification 焊缝结晶形态solidification mode in weld-bead 结晶层状线ripple 多边化边界polygonization boundary 结晶平均线速度mean solidification rate 针状铁素体acicular ferrite 条状铁素体lath ferrite 侧板条铁素体ferrite side-plate 晶界欣素体grain boundary ferrite; polygonal ferrite; pro-entectoid ferrite 粒状贝氏体granular bainite 板条马氏体lath martensite 过热组织overheated structure 魏氏组织Widmannst?tten structure M-A 组元martensite-austenite constituent 焊件失效分析failure analysis of weldments
焊接英语词汇
焊接的基本概念知识 ⑴熔化焊接(Fusion welding)手工电弧焊(SMAW:Shielded meta l arc weldi ng)埋弧焊(SAW:Submerged arc welding) 钨极惰性气体保护电弧焊(TIG:Tungsten Inert-Gas arc welding)⑵压力焊接(Pressure welding) 熔化极惰性气体保护电弧焊(MIG:meta l Inert-gas arc welding)爆炸焊(Expl osive welding) 冷压焊(Cold welding)摩擦焊(Friction welding)扩散焊(Diffusion weldin g)焊缝接头(Welded joint) ⑶钎焊(Soldering(软钎焊)/Brazing(硬钎焊))电阻钎焊(resistance brazing) 火焰钎焊(torch brazing/ soldering) 热压焊:hot pressure welding 电渣焊:electroslag welding薄钢板的焊接(We iling of thin steel sheets) 电子束焊:electron beam welding 电阻焊:resistance welding 点焊: Spot w eld 对接接头(Butt joint); 搭接接头(Lap joint);角接接头(Fillet weld)T型接头(T-joint/Tee joint) 最常用的是:对接接头(Butt joint is the most used one)不开坡口的对接接头(Butt joint without groove) 两焊件端面相对平行的接头(The joint whose welding suefaces of both wel ding parts are parallel is called butt joint.) 如果产品在厚度方向上不要求全焊透,可进行单面焊接,应必须保证焊缝的计算厚度H≥0.7δ,δ为板厚。如果要求产品在整个厚度上全部焊透,可在焊缝背面用碳弧气刨清跟后再进行焊接,即形成不开坡口的双面焊接对接接头。(If the product doesn’t need full penetration of welding, we can take single-si de welding, and must make sure that the caculating thickness is more than or equal to 0.7δ(δis the thickness of steel sheets),If full penetration of weld ing needed, we can use carbon arcgouging to back chipping at the back of weld, after which weiding can be taken, than the double-faced welding butt joi nt without groove is formed.)
焊接专业英语词汇(通用部分)
焊接专业英语词汇(通用部分) Fierce welding 满焊焊烧 Symmetry welding 对称焊接 Welding deformation 焊接变形 Seal 封口 Vertical position welding 立焊 Horizontal position welding 横焊 Over-head position welding 仰焊 acetylene 乙炔ampere 电流安培 angle welding 角焊arc 电弧 argon arc welding 氩弧焊接bare electrode 光熔接条butt welding 对接焊接camber 电弧弯曲 cascade 阶叠熔接法clad weld 被覆熔接 crator 焊疤excess metal 多余金属 filler rod 焊条fillet weld 填角焊接 gas shield 气体遮蔽groove welding 起槽熔接 hand face shield 手握面罩hard facing 硬表面堆焊jig welding 工模焊接laser beam welding 雷射光焊接
metal electrode insert gas welding MIG熔接nugget 点焊熔核overlaying 堆焊peening of welding 珠击熔接法 plug welding 塞孔熔接positioned welding 正向熔接 pressure welding 压焊propane gas cutting 丙烷气切割 pure nickel electrode 纯镍熔接条reinforcement of weld 加强焊接resist 抗蚀护膜root running 背面熔接 seam 焊缝seaming 接合 seam welding 流缝熔接series seam welding 串联缝熔接 skip welding process 跳焊法spark 火花 spot welding 点焊接stitch welding 针角焊接 stud arc welding 电弧焊接under laying 下部焊层 void 焊接空隙weld flow mark 焊接流痕 weld flush 焊缝凸起weld line 焊接纹 weld mark 焊接痕weld penetration 熔接透入 weld zone 焊接区welding 焊接 welding bead 焊接泡welding direction 焊接方向 welding distortion 焊接变形welding flux 焊剂 welding ground 电熔接地welding interval 焊接周期 welding stress 熔接应变welding torch 熔接气炬 welding electrode production line 电焊条生产线 welding electrode 焊条 welding fixture 焊接夹具
焊接英语专业术语
焊接英语专业术语 1.1 焊接方法 焊接方法与设备(Welding process& f acility) 手工电弧焊(MAW:manual arc weldin g) 电弧焊(arc welding)埋弧电弧焊(S AW:submerged arc welding) 气焊(gas welding)氩弧焊(argon arc welding) 气体保护电弧焊 CO2保护焊(CO2 shie lded arc welding) 熔化焊(GMAW—gas metal arc weldi ng) fusion welding 电渣焊(ESW—electr oslag welding) 激光焊(LW—laster welding) 等离子焊(PAW—plasma arc welding) 摩擦焊(FRW—friction welding) 焊接压力焊超声波焊(UW—ultrason ic welding) welding pressure welding 冷压焊(C PW—cold pressure welding) 锻焊(FW—forge-welding)对焊but t welding 电阻焊(RW—resistance welding) 缝焊seam welding 点焊spot welding 烙铁钎焊 iron soldering 火焰钎焊 torch brazing/ torch sol dering 钎焊炉中钎焊 furnace brazing/ fu rnace soldering soldering/brazing 盐浴钎焊 saltba th dip brazing (soldering) 真空钎焊 vacuum brazing 堆焊 overlaying welding 平焊 downhand welding/flat weldin g 横焊 horizontal welding 立焊 vertical welding 仰焊 overhead welding 全位置焊 all position welding/pos itional welding 半自动电弧焊 Semi-automatic arc w elding 钨极惰性气体保护电弧焊 (TIG) tung sten inert-gas arc welding 熔化极惰性气体保护电弧焊(MIG)me tal inert-gas arc welding 1.2 焊接设备 电弧焊机 arc welding machine 直流弧焊机 DC arc welding machine 交流弧焊机 AC arc welding machine 交直流两用弧焊机 AC/DC arc weldin g machine 氩弧焊机 argon arc welding machin e 二氧化碳弧焊机 CO2 arc welding ma chine 埋弧焊机 submerged arc welding ma chine 焊接机头 welding head 行走机构 traveller 送丝机构 wire feeder 焊丝盘 wire reel 焊钳 electrode holder 焊枪 welding gun 碳弧气割 carbon arc air gouging 火焰气刨 flame gouging 焊接夹具 welding jig/ fixture 等离子弧焊机 plasma arc welding m achine 等速送丝方式 constant wire-feed s ystem 变速送丝方式 alternate wire-feed system 点焊机 spot welding machine 缝焊机 seam welding machine 对焊机 butt resistance welding ma chine 凸焊机 projection welding machine 2、焊接材料及焊接工艺(welding ma terials& procedure) 2.1 焊接材料 碳钢 carbon steel 合金钢 alloy steel 不锈钢 stainless steel 耐热钢 high-temprature steel 铸铁 casting 铜/黄铜 copper 青铜 bronze 铝 aluminium 镁 magnisium 钛 titanium 钨 tungsten 镍 nickel 铬 chromium 2.2 焊接工艺 焊接技能 welding technique 焊接方法 welding process 焊接工艺welding procedure 焊接操作 welding operation 焊接顺序 welding sequence 焊接方向 welding progress 焊缝宽度 weld width 焊缝厚度 weld throat 焊缝余高 weld reinforcement 焊缝长度 weld length 焊接参数 welding parameter 焊接电流 welding current 焊接速度 welding speed 焊接电压 welding voltage 焊接变形 welding deformation 根部间隙 root opening
焊接专业英语词汇(钎焊)
焊接专业英语词汇(钎焊) 钎焊 硬钎焊brazing 软钎焊soldering 烙铁钎焊iron soldering 火焰钎焊torch brazing/ torch soldering 热风钎焊hot gas soldering 感应钎焊induction brazing 电阻钎焊resistance brazing 接触反应钎焊contact-reaction brazing 电弧钎焊arc brazing 浸渍钎焊dip brazing/ dip soldering 盐浴钎焊saltbath dip brazing (soldering) 金属浴钎焊molten metal bath dip brazing 炉中钎焊furnace brazing/ furnace soldering 保护气氛钎焊brazing in controlled atmosphere 真空钎焊vacuum brazing 蒸气钎焊vapor phase soldering 超声波钎焊ultrasonic soldering 扩散钎焊diffusion brazing 波峰钎焊flow soldering/ wave soldering 分级钎焊step brazing/ step soldering
红外线钎焊infra-red brazing (soldering) 光束钎焊light soldering (brazing) 激光钎焊laser brazing (soldering) 电子束钎焊electron beam brazing 钎接焊braze-welding 钎料brazing filler metal/ solder 硬钎料brazing filler metal 软钎料solder (m) 自钎剂钎料self-fluxing brazing alloy/ self-fluxing filler met al 活性钎料active filler metal/ active metal brazing alloy 成形钎料preformed filler metal/ solder preform 非晶态钎料amorphous filler metal 粉状钎料powdered filler metal 钎料膏braze cream/ braze paste/ solder cream/ solder p aste 药皮钎料flux coated brazing(soldering)rod 层状钎料sandwich filler metal 药芯钎料丝flux-cored colder wire 敷钎料板clad brazing sheet 钎剂brazing flux; soldering flux 气体钎剂gas flux
常用焊接英语术语
常用焊接术语 在实际应用过程中,经常会碰到一些与焊接相关的术语,行话,总结如下: 正极性指直流焊接时,被焊物接(+)极,焊条、焊丝接(-)极 反极性与正极性相反 直流电弧焊或电弧切割时,焊件与焊接电源输出端正、负极的接法称为极性。极性分正极性和反极性两种。焊件接电源输出端的正极,电极接电源输出端的负极的接法为正极性(常表示为DCSP)。反之,焊件接电源输出端的负极,电极接电源输出端的正极的接法为反极性(常表示为DCRP)。 欧美常常用另外一种表示方法,将DCSP称为DCEN,而将DCRP称为DCEP。 焊接电流为向焊接提供足够的热量而流过的电流 电弧电压指电弧部的电压,与电弧长大致成比例地增加,一般电压表所示电压值包括电弧电压及焊丝伸出部,焊接电缆部的电压下降值。 弧长弧部长度 弧坑在焊缝终点产生的凹坑 气孔熔敷金属里有气产生空洞 飞溅焊接时未形成熔融金属而飞出来的金属小颗粒 焊渣焊后覆盖在焊缝表面上的固态熔渣 熔渣包覆在熔融金属表面的玻璃质非金属物 咬边由于焊缝两端的母材过烧,致使熔融金属未能填满,形成槽状凹坑。 熔深母材熔化部的最深位与母材表面之间的距离 熔池因焊弧热而熔化成池状的母材部分 熔化速度单位时间里熔敷金属的重量 熔敷率有效附着在焊接部的金属重量占熔融焊条、焊丝重量的比例 未熔合对焊底部的熔深不良部,或第一层等里面未融合部 余高鼓出母材表面的部分或角焊末端连接线以上部分的熔敷金属 坡口角度母材边缘加工面的角度 预热为防止急热,焊接前先对母材预热(如火焰加热) 后热为防止急冷进行焊后加热(如火焰加热) 平焊从接头上面焊接
横焊从接头一侧开始焊接 立焊沿接头由上而下或由下而上焊接 仰焊从接头下面焊接 垫板为防止熔融金属落下,在焊接接头下面放上金属、石棉等支撑物。 夹渣夹渣是非金属固体物质残留于焊缝金属中的现象,夹杂物出现在熔焊过程中 焊剂焊接时,能够熔化形成熔渣和气体,对熔化金属起保护和冶金处理作用的一种物质。 碳弧气刨使用石磨棒或碳棒与工件间产生的电弧将金属熔化,并用压缩空气将其吹掉,实现在金属表面上加工沟槽的方法 保护气体焊接过程中用于保护金属熔滴、熔池及焊缝区的气体,它使高温金属免受外界气体的侵害 焊接夹具为保证焊件尺寸,提高装配精度和效率,防止焊接变形所采用的夹具 焊接工作台为焊接小型焊件而设置的工作台 焊接操作机将焊接机头或焊枪送到并保持在待焊位置,或以选定的焊接速度沿规定的轨迹移动焊剂的装置焊接变位机将焊件回转或倾斜,使接头处于水平或船行位置的装置 焊接滚轮架借助焊件与主动滚轮间的摩擦力来带动圆筒形(或圆锥形)焊件旋转的装置
常用焊接英语汇总
?热丝MIG焊hot wire MIG welding ?MIG熔接metal electrode insert gas welding ?X射线衍射法X-ray stress analysis ?X射线探伤X-ray radiographic inspection ?X射线工业电视探伤X-ray industrial television inspection ?Tigamajig 薄板焊接裂纹试验Tigamajing thin plate cracking test ?热丝TIG焊hot wire TIG welding ?100℃残余扩散氢diffusible hydrogen remained at 100℃ ?射频熔接; 高频焊接radio-frequency welding ?预热preheat ?预热preheat ?预热温度preheat temperature ?预热时间preheat time ?预热电流preheat current ?预热火焰preheat flame ?预热氧preheat oxygen ?CO2预热器CO2 heater ?预热Preheating ?预热温度Preheat temperature ?错边量unfitness of butt joint ?埋弧焊submerged arc welding (SAW) ?埋弧焊Submerged arc welding (SAW) ?自动埋弧焊automatic submerged arc welding ?窄间隙埋弧焊焊剂flux for narrow-gap submerged arc welding ?埋弧焊submerged arc welding (SAW) ?多丝埋弧焊multiple wire submerged arc welding ?纵列多丝埋弧焊Tandem sequence (submerged-arc welding) ?横列多丝埋弧焊series submerged arc welding (SAW-S) ?横列双丝并联埋弧焊transverse submerged arc welding ?热丝埋弧焊hot wire submerged-arc welding ?窄间隙埋弧焊narrow-gap submerged arc welding ?埋弧焊机submerged arc welding machine ?接合线, 焊线埋弧焊bonding wire ?埋弧焊Submerged arc welding (SAW) ?对接接头butt joint ?对接接头banjo fixing butt jointing ?对接接头butt joint ?I形对接接头square butt joint ?V形对接接头single V butt joint ?U形对接接头single U butt joint ?双V形对接接头double V butt joint ?双单边V形对接接头double bevel butt joint/ K groove butt joint ?带钝边U形对接接头double U butt joint ?锁底对接接头lock butt joint