CV308H-D-30_Specification_V1.0

FORM-70-016-01

REV: V1.0

LCD TV CONTROL BOARD

SPECIFICATION

MODEL : CV308H-D-30 AUTHOR :

CHECKED BY :

APPROVED BY :

PUBLISHED DATE: Mar. 4, 2011

ShenZhen Cultraview Digital Technology CO.,LTD

6F,M-6 Building, MaQueLing, High-Tech Park Zone, NanShan Shen Zhen

TEL : +86-0755-******** FAX : +86-0755-********

http:// https://www.360docs.net/doc/0f18726343.html,

U L T

R A V

I E W

ITEM

1. CHANGE THE LIST OF UPGRADES ....................................................................3 2. GENERAL DESCRIPTION.....................................................................................4 3. FEATURES ............................................................................................................5 4. PRESET MODE FOR USB, VGA, HDMI................................................................6 5. ENVIRONMENTAL CONDITION............................................................................8 6. PICTURE................................................................................................................9 7. INTERFACE DEFINITION....................................................................................10 8. CONFIGURATION................................................................................................15 9. PACKAGING........................................................................................................17 10.APPLICATION REQUIREMENT . (18)

11. EXCURSUS (19)

U L T

R A V

I E W

1. CHANGE THE LIST OF UPGRADES

Version Description Page redaction Checked Date

V1.0 First Release ALL JP .Du Mar. 4, 2011

L T

R A V

I E W

2. GENERAL DESCRIPTION

That product is digital & analogue TV board, can receive the PAL/SECAM analogue television and digital television( mount 308 chip can support DVB-T & DVB-C, mount 309 chip just support DVB-T). supporting H.264 Video decode, It is applicable to include Europe (include UK), Australia etc. with single common interface (CI/CI plus), match with the CAM card can decrypt the program which is encrypt with Irdeto, Viaccess, Conax etc. modes.

? Support DVB-T&DVB-C(308)/DVB-T(309), MPEG2 decode MP@ML.

MPEG-4&H.264 Video decoder, supports resolutions up to HDTV.

? Digital TV supports MHEG5 (UK), LCN, EPG, SUBTITLE, and the AUDIO

Language etc.

? Support USB 2.0 multimedia play, support audio and video play; support txt and

picture browse.

? Analogue and digital HD port input signal largest support 1080P. ? The largest support various TFT-LCD 1920x1080 resolutions module. ? The HDMI support 1.3, the HDCP support 1.1.

? The 3-D video decoding and Chroma separation.

? 3-D motion adaptive video de-interlacers with edge-oriented adaptive algorithm for

smooth low-angle edges. ? 3-D video noise reduction.

? Support analogue & digital 1000 Pages Teletext . ? Supports A2/NICAM/FM/AM demodulation in PAL.

? Automatic 3:2 pull-down & 2:2 pull-down detection and recovery.

? MStar 3rd Generation Advanced Color Engine (MStarACE-3) automatic picture

enhancement.

? True color OSD, humanized operation menu, supports Channel List, channel edit

and other deluxe function. ? Supports standard PVR and advanced PVR & time-shifting(It depend on DDR).

? Support USB update.

U L T

R A V

I E W

3. FEATURES

Type TFT-LCD

Resolution Max. 1920X1080 Interface Single/ Double LVDS PANEL

Voltage 5V, 12V

Sync

H: 30-75KHz V: 56-75Hz

Signal 0.7Vp-p@75ohm RGB

MODE Max 1920X1080@60Hz

Receiving

49MHz – 863MHz Impedance 75?

Video System PAL ,SECAM BG, DK, I, L/L’

ATV

Sound System NICAM/A2

VHF (174MHz – 230MHz) receiving

UHF (474MHz - 862MHz)

Impedance 75?

Bandwidth 7MHz/8MHz DVB-T:COFDM 2K/8K QPSK, 16QAM, 64QAM Modulation

DVB-C:16-256QAM Video System H.264 video decoding

DTV

Sound System

MPEG Audio,Dolby Digital

Color system

PAL/NTSC/SECAM

Video 1Vp-p@75ohm AV

Audio 500mV rms

Video Y:1Vp-p@75ohm,PbPr:0.7Vp-p@75ohm Audio 500mVrms YPbPr Format Max. 1080P Video Standard TMDS HDMI

Format Max. 1080P

Video

CVBS&RGB input, CVBS output RBG: 0.7Vp-p@75ohm Video output/input CVBS: 1Vp-p@75ohm SCART Audio output/input 500mVrms

Keyboard

Power/Menu/Source/ Up/ Down/ Left/ Right OSD

Picture/Sound/Time/Function/Lock/Frequency

OSD Language Multi language English/French/German/Spanish/Italian Amplifier 2 X8W @ 8ohm THD<10%

Power input 5Vstb/1A, 5V/4A, 12V/1A, 24V/2A, Panel Power Standby

< 0.3W(Main Board Only)

U L T

R A V

I E W

4. PRESET MODE FOR USB, VGA, HDMI

VGA FORMAT MODE

Resolution

Refresh Rate

60HZ 74KHZ

1920 X1200

60HZ 74.6KHZ 60HZ 64.7KHZ

1680X1050

60HZ 65.3KHZ 60HZ 55.5KHZ

1440X900

60HZ 59.9KHZ

1280X1024 60HZ 63.5KHZ

60HZ 48.4KHZ

70HZ 56.5KHZ

1024X768 75HZ 60.0KHZ 60HZ 37.9KHZ

70HZ 47.2KHZ

800X600 75HZ 46.9KHZ 60HZ 31.5KHZ

70HZ 37.9KHZ

640X480 75HZ 37.5KHZ

720X400 70HZ 31.5KHZ

HDMI FORMAT MODE

Format Resolution Hor.Freq(KHz) Vert.Freq(HZ) 480i 480 15.734 60

480p 480

31.465 31.500 59.94

60 576i 576 15.625

15.734

576p 576 31.250 50 720p 720 44.955 60

1080i 1080

28.125 33.750 50

60 1080p 1080

56.250 67.500 50

U L T

R A V

I E W

USB FORMAT MODE Type

Container

Video Decoder Max Resolution

Motion JPEG

The maximum video resolution is 640x480

AVI

Divx,Xvid

H.264(BP,MP,HP) MPEG-4 SP/ASP MOV,MKV

MPEG-4 SP/ASP H.264(BP,MP,HP) MP4 MPEG-4 SP/ASP H.264(BP,MP,HP)

MPEG-2 (Program Stream)H.264(BP,MP,HP)

The maximum video resolution is 1920x1080

MPEG-1(Program Stream)

MPEG-2(Program Stream)

MPEG-2 VOB

The maximum video resolution

is 720x576

ASF VC1 MOVIE

FLV

The maximum video resolution is 1920x1080

JPEG 8192x8192

Progressive JPEG

1024x768

BMP 3000x3000 PHOTO

PNG 3000x3000

ADPCM ,LPCM MP3 MPEG1 Layer1,2 AC3

AAC ,HE-AAC WMA7,WMA8,WMA9 STD

CDDA (*.wav) RealAudio8 LBR DD51

DDPlus

MUSIC

DTS(Need for apply KEY)

Special Note ：

1）H.264: BP/MP/HPMain Profile and High Profile @Level 4.1(not support FMO, ASO, RS). MPEG4: Simple Profile and Advanced Simple Profile @Level 5(not support GMC).

2) USB only support PHOTO, MUSIC and MOVIE. The system automatically classified files, only show the supported files.

3）Support hard disk ，the maximum storage capacity is 1T .

4）Only support single audio channel audio format and dual-audio channel audio format.

U L T

R A V

I E W

5. ENVIRONMENTAL CONDITION

Input Electrical Characteristics

Power Symbol Range Max Current Ripple VCC_+5V +5V +5.0V--+5.2V 4A 50mV VCC_+5VSTB +5VSTB +5.0 V --+5.2V 1A 50mV VCC_+12V +12V +12V--+12.5V 1A 100mV AMP_Power +24V +23V--+24.5V 2A 100mV

Output Electrical Characteristics

Power Symbol Range Max Current Ripple DVD Power DVD_+5V +5.0V--+5.2V 1.5A 50mV PANEL Power DVD_+12V +12V--+12.2V 500mA 100mV USB Power USB_+5V +5.0V--5.2V 1.5A 50mV

Substitutable Primary Materials

The table is for reference only, the actual item is the standard Name Main Type Brand BackupType Brand Location DDR W971GG6JB-18 WINBOND K4T1G164QF-BCF8SAMSUNG U7

FLASH EN25Q32A-100HIP

SOP8

EON W25Q32 SOP8 WINBOND U12

ECAP / SANMEI / XUNDA /

LDO AS7805D-E1

TO-252

BM AZ7805AD-E1 BCD U10

PCB CV308H-D-30 XINGDA CV308H-D-30 KEXIANG /

Power Up Timing

TIME

R A V

I E W

alternation DESCRIPTION Min Type Max Unit

t1 Hardware Reste Width 10 200 / ms t2 Pwr_on/off t setup TO +5V t setup / / 190 ms t3 Pwr_on/off t setup TO +12V t setup / / 190 ms

6. PICTURE

Europe Product

J7:INVERT ER PORT

J4:MAIN POWER

J2:HDC P PORT

J3:PANEL _POWER

J6:LVDS PORT

J5:USB 1 PORT

J1:+24V AMP POWER

J8:AUDIO OUTPUT

CON6:COMPONENT IN Y Pb （Cb ） Pr （Cr ）

CVBS

L R

CON1: USB CON7:HDMI1 CON8:HDMI2 CON9:HDMI3

CON11:VGA

CON2:P C AUDIO CON4:

SCART

CON10:COAX

CON6:AV IN

U11:TU

NER CON3:E ARPHON

J11:IR&LED

&KEY PORT

J9:DVD_POW ER&CTRL

J13:HDMI

J10:AUDIO OUT

J12:DVD_SI GNAL

U L T

R A V

I E W

Australia Product

7. INTERFACE DEFINITION

All jack recognize the square pad as first pin. J1 (4pin/2.54): AMP_POWER NO. SYMBOL DESCRIPTION 1 GND Ground 2 GND Ground 3 +24V +24V power 4 +24V +24V power

J2 (6pin/2.0): HDCP PORT NO. SYMBOL DESCRIPTION 1 +12V +12V power 2 +5V +5V power 3 GND Ground

U L T

R A V

I E W

4 SCL I2C clock

5 SDA I2C data

6 GND Ground

J4 (10pin/2.54): BUILT-IN POWER SUPPLY CONNECTOR NO. SYMBOL DESCRIPTION 1 12VA +12V DC Power Supply 2 GND Ground 3 +5V Main +5V Power Supply 4 +5V Main +5V Power Supply 5 P5V Panel Power Supply 6 P5V Panel Power Supply 7 GND Ground 8 GND Ground 9 ON/OFF Power On/Off 10 +5VSTB +5V DC Power Supply when Standby

J5 (4pin/2.0)：Expand USB PORT NO. SYMBOL DESCRIPTION 1 GND Ground

2 DP0 USB Data+

3 DM0 USB Data-

4 +5V +5V DC power for USB1

J6 (2X20pin/2.0)：LVDS INTERFACE

NO. SYMBOL DESCRIPTION 1 VCC Power Supply for Panel 2 VCC Power Supply for Panel 3 VCC Power Supply for Panel 4 GND Ground 5 GND Ground 6 GND Ground 7 RXO0- LVDS ODD 0- Signal 8 RXO0+ LVDS ODD 0+ Signal 9 RXO1- LVDS ODD 1- Signal 10 RXO1+ LVDS ODD 1+ Signal 11 RXO2- LVDS ODD 2- Signal 12 RXO2+ LVDS ODD 2+ Signal 13 GND Ground

U L T

R A V

I E W

14 GND Ground 15 RXOC- LVDS ODD Clock- Signal 16 RXOC+ LVDS ODD Clock + Signal 17 RXO3- LVDS ODD 3- Signal 18 RXO3+ LVDS ODD 3+ Signal 19 RXE0- LVDS EVEN 0- Signal 20 RXE0+ LVDS EVEN 0+ Signal 21 RXE1- LVDS EVEN 1- Signal 22 RXE1+ LVDS EVEN 1+ Signal 23 RXE2- LVDS EVEN 2- Signal 24 RXE2+ LVDS EVEN 2+ Signal 25 GND Ground 26 GND Ground 27 RXEC- LVDS EVEN Clock- Signal 28 RXEC+ LVDS EVEN Clock + Signal 29 RXE3- LVDS EVEN 3- Signal 30 RXE3+ LVDS EVEN 3+ Signal 31 GND Ground 32 GND Ground 33 ON_PBACK PDP Control 34 ON_PANEL PDP Control 35 SCL IIC SCL 36 SDA IIC SDA 37 RXO4- LVDS ODD 3- Signal 38 RXO4+ LVDS ODD 3+ Signal 39 RXE4- LVDS EVEN 3- Signal 40 RXE4+ LVDS EVEN 3+ Signal

J7 (6pin/2.0mm)：INVERTER CONNECTOR NO. SYMBOL DESCRIPTION 1 GND Ground 2 GND Ground 3 ADJ Brightness Adjustment for Panel(Volts DC Output) 4 ON/OFF Back-Light ON/OFF Control for Panel 5 +12V INVERTER +12V DC Power Supply 6 +12V INVERTER +12V DC Power Supply

J8 (4pin/2.54): AMP_AUDIO OUT NO. SYMBOL DESCRIPTION 1 R Right Audio output 2 GND Ground 3 GND Ground 4 L Left Audio output

U L T

R A V

I E W

J9 (8pin/2.0): DVD POWER NO. SYMBOL DESCRIPTION 1 DVD_STB DVD Standby 2 DVD_AUTO DVD AUTO 3 DVD_IR IR Data Transfer to DVD 4 +12V +12V DC Power Supply for DVD 5 GND Ground 6 GND Ground 7 +5V +5V DC Power Supply for DVD 8 +5V +5V DC Power Supply for DVD

J10 (3pin/2.0): AUDIO LINE OUT CONNECTOR NO. SYMBOL DESCRIPTION 1 ROUT Audio Right Channel Output 2 GND Ground 3 LOUT Audio Left Channel Output

J11 (14pin/2.0): KEY&IR&LED BOARD CONNECTOR NO. SYMBOL DESCRIPTION 1 GND Ground

2 K7 Key7(Reserved)

3 POWER POWER KEY

4 VOL+ VOL+ KEY

5 VOL- VOL- KEY(AD1)

6 INPUT INPUT KEY/AD0

7 CH+ CH+ KEY

8 CH- CH- KEY

9 MENU MENU KEY 10 GND Ground 11 IR IR Receiver 12 LED_G Green Indicator 13 LED_R Red Indicator 14 +5V +5V DC Power Supply

J13 (2*10pin/2.0)：EXTERNAL HDMI CONNECTOR

U L T

R A V

I E W

NO. SYMBOL DESCRIPTION 1 DA2+ HDMI 2+ Signal 2 DA2- HDMI 2- Signal 3 DA1+ HDMI 1+ Signal 4 DA1- HDMI 1- Signal 5 DA0+ HDMI 0+ Signal 6 DA0- HDMI 0- Signal 7 CLKA+ HDMI Clock- Signal 8 CLK- HDMI Clock- Signal 9 DDCA_SCL HDMI DDC IIC SCL 10 DDCA_SDA HDMI DDC IIC SDA 11 GND Ground 12 GND Ground 13 HDMI_5V HDMI +5V DC Power Supply 14 HPD HDMI Hot Plug Detect 15 GND Ground 16 GND Ground 17 CEC CEC Signal 18 5VA +5V DC Power Supply 19 SCL Main IIC SCL 20 SDA Main IIC SDA

J12(11pin/2.0)：DVD VIDEO&AUDIO INPUT CONNECTOR NO. SYMBOL DESCRIPTION 1 GND Ground 2 Y YpbPr-Y Input 3 GND Ground 4 Pr YpbPr-Pr Input 5 GND Ground 6 Pb YpbPr-Pb Input 7 LIN Left Channel Input 8 GND Ground 9 RIN Right Channel Input 10 GND Ground 11 SPDIF SPDIF Input

U L T

R A V

I E W

8. CONFIGURATION

Europe

The PCB board is thick :1.6mm

Component the tallest altitude:30mm Install diameter inside the bore 3.5mm

U L T R A V

I E W

Australia

The PCB board is thick :1.6mm

Component the tallest altitude:30mm Install diameter inside the bore 3.5mm

U L T

R A V

I E W

9. PACKAGING

9.1 PACKING SPECIFICATIONS

(1) 40pcs/1box (2) Box dimension: L730×W340×H315(mm) (3) Weight: 14.5Kg/box

9.2 PACKING METHOD

Main Board

Antistatic Bag

Partitio n Chipboard (Bottom)

Chipboard (Top) Carton Label

Carton

U L T

R A V

I E W

10.APPLICATION REQUIREMENT

? Relative humidity ≤80%

? Store temperature -10~+60 ℃ ? Use temperature 0~+40 ℃

? The procedure of the whole machine assembles and transports need to

attend ESD transaction.

? When the whole set assemble, it can down pack or side pack, but don't

make the board transform or distort, don't be subjected to heavy pressure. ? The hole of each port does not be opened too small, especially the HDMI

port hole, avoid the whole set morphing to cause the extrusion of port when installing.

? The hole of RGB socket is recommended the situation of not using the

screw stationary on the RGB socket to fix on the structure board.

? The connected wire which between the other boards and this board can't be

leaded too long, or affect performance and image quality.

? The whole set inner wires matching reasonable, each connected wire try to

not directly cross the PCB board, especially cross over from the main IC, avoid affect the whole set EMC performance.

? n order to obtain better EMC effect of the whole set, we suggest the LVDS

twisted pair wire between the main board and panel must be tied up well and try to use shielding wire. If it’s possible, try to put on the magnetic belt ring on the wire which near the board terminal.

? The HDMI and HDCP on the main board are all passed the related

certifications, but we just provide testing certification of the inner usage standard. If you need to use legal HDMI and HDCP, please apply related association as formal member by yourself.

? There is ROHS identification on the board and package, the board match

ROHS standard.

U L T

R A V

I E W

11. EXCURSUS

Keyboard and remote definition

U L T

R A V

I E W