华为设备基本操作命令
华为设备基本操作命令
[r1]display version 查看系统版本信息
[r1]display cpu-usage 查看设备CPU使用信息[r1]display memory-usage 查看设备内存使用信息[r1]display fan 查看风扇信息
[r1]display temperature all 查看设备温度[r1]display power 查看电源信息
[r1]display health 查看设备健康情况
[r1]display elabel 查看设备模块信息
[r1]display ip interface brief
查看IP接口信息[r1]display interface brief 查看接口信息
恢复之前删除掉的文件
彻底删除文件(不能恢复) [r1]quit 返回上一级模式
[r1]return 快速返回到<>模式
[r1]display this 查看当前模式下的配置
[r1]interface g0/0/0 进入接口
[r1-GigabitEthernet0/0/0]ip add 1.1.1.1 24
接口配置IP地址
[r1-GigabitEthernet0/0/0]undo shut 激活接口Undo +命令删除该命令
[r1]display current-configuration
查看当前运行的配置[r1]display saved-configuration
查看已保存配置
[Huawei-ui-console0]idle-timeout 0(分钟) 0(秒)
配置console口永远不超时
配置TELNET(远程登录该设备)
[r1]user-interface vty 0 4 进入VTY接口
[r1-ui-vty0-4]authentication-mode pass
开启认证
Please configure the login password (maximum length 16):123 配置远程登录密码为123 [r1-ui-vty0-4]user privilege level 0-15
远程登录用户权限为最低0级(默认为0)
[r1]super password lev 3 cipher 234567
用户权限提升为3级授权密码为234567 实验效果:在与R1相连的R2路由器上输入
Password:123 VTY密码
Password:234567 super密码
[r1] 成功远程进入r1设备的系统视图模式
[Huawei]dis default-parameter X 查看默认参数
[Huawei]dis history-command
[Huawei]user-interface console 0
[Huawei-ui-console0]history-command max-size ?
INTEGER<0-256> The size of a history buffer, the default value is 10
dis startup 查看系统启动配置参数
[Huawei]undo info-center enable 关闭告警信息
设置save命令的级别为3
关于FTP内容,请大家参看入门实验指导书上FTP的实验
没有查找到命令
输入命令不明确
输入命令不完整
输入参数太多