齿轮术语中英文

术语翻译对照：

齿轮 Toothed gear；Gear
齿轮副 Gear pair
平行轴齿轮副 Gear pair with parallel axes
相交轴齿轮副 Gear pair with intersecting axes
齿轮系 Train of gears
行星齿轮系 Planetary gear train
齿轮传动 Gear drive；Gear transmission
配对齿轮 Mating gears
小齿轮 Pinion
大齿轮 Wheel；Gear
主动齿轮 Driving gear
从动齿轮 Driven gear
行星齿轮 Planet gear
行星架 Planet carrier
太阳轮 Sun gear
内齿圈 Ring gear；Annulus gear
外齿轮 External gear
内齿轮 Internal gear
中心距 Centre distance
轴交角 Shaft angle
连心线 Line of centres
减速齿轮副 Speed reducing gear pair
增速齿轮副 Speed increasing gear pair
齿数比 Gear ratio
传动比 Transmission ratio
轴平面 Axial plane
基准平面 Datum plane
节平面 Pitch plane
端平面 Transverse plane
法平面 Normal plane
分度曲面 Reference surface
节曲面 Pitch surface
齿顶曲面 Tip surface
齿根曲面 Root surface
基本齿廓 Basic tooth profile
基本齿条 Basic rack
产形齿条 Counterpart rack
产形齿轮 Generating gear of a gear
产形齿面 Generating flank
基准线 Datum line
轮齿 Gear teeth；Tooth
齿槽 Tooth space
右旋齿 Right-hand teeth
左旋齿 Left-hand teeth
变位齿轮 Gears with addendum modification；X-gears
高度变位圆柱齿轮副 X-gear pair with reference centre distance
角度变位圆柱齿轮副 X-gear pair with modified centre distance
高度变位锥齿轮副 X-gear pair without shaft angle modification
角度变位圆柱齿轮副 X-gear pair with shaft angle modification
变位系数 Modification coefficient
变位量 Addendum modification
径向变位系数 Addendum modification coefficient
中心距变位系数 Centre distance modification coefficient
圆柱齿轮 Cylindrical gear
顶圆 Tip circle
根圆 Root circle
齿距 Pitch
齿距角 Angular pitch
公法线长度 Base tangent length
分度圆直径 Reference diameter
节圆直径 Pitch diameter
基圆直径 Base diameter
顶圆直径 Tip diameter
根圆直径 Root diameter
齿根圆角半径 Fillet radius
齿高 Tooth depth
工作高度 Working depth
齿顶高 Addendum
齿根高 Dedendum
弦齿高 Chordal height
固定弦齿高 Constant chord height
齿宽 Facewidth
有效齿宽 Effective facewidth
端面齿厚 Transverse tooth thickness
法向齿厚 Normal tooth thickness
端面基圆齿厚 Transverse base thickness
法向基圆齿厚 Normal base thickness
端面弦齿厚 Transverse chordal tooth thickness
固定弦齿厚 Constant chord
端面齿顶厚 Crest width
法向齿顶厚 Normal crest width
端面齿槽宽 Transverse spacewidth
法向齿槽宽 Normal spacewidth
齿

厚半角 Tooth thickness half angle
槽宽半角 Spacewidth half angle
压力角 Pressure angle
齿形角 Nominal pressure angle
圆弧圆柱蜗杆 Arc-contact worm；hollow flank worm；
直廓环面蜗杆 Enveloping worm with straight line grneratrix；TA worm
平面蜗杆 Planar worm wheel；P-worm wheel
平面包络环面蜗杆 Planar double enveloping worm；TP-worm
平面二次包络蜗杆 Planar double-enveloping worm wheel；TP-worm wheel
锥面包络环面蜗杆 Toroid enveloping worm wheel；TK-worm wheel
渐开线包络环面蜗杆 Toroid enveloping worm hich involute holicoid generatrix；TI-worm
锥蜗轮 Spiroid gear
锥蜗杆副 Spiroid gear pair
中平面 Mid-plane OUt
长幅内摆线 Prolate hypocycloid
短幅内摆线 Curtate hypocycloid
渐开线 Involute; Involute to a circle
延伸渐开线 Prolate involute
缩短渐开线 Curtate involute
球面渐开线 Spherical involute
渐开螺旋面 Involute helicoid
阿基米德螺旋面 Screw helicoid
球面渐开螺旋面 Spherical involute helicoid
圆环面 Toroid
圆环面的母圈 Generant of the toroit
圆环面的中性圈 Middle circle of the toroid
圆环面的中间平面 Middle-plane of the toroid
圆环面的内圈 Inner circle of the toroid
啮合干涉 Meshing interference
切齿干涉 Cutter interference
齿廓修型 Profile modification； Profile correction
修缘 Tip relief
修根 Root relief
齿向修形 Axial modification； Longitudinal correction
齿端修薄 End relief
鼓形修整 Crowning
鼓形齿 Crowned teeth
挖根 Undercut
瞬时轴 Instantaneous axis
瞬时接触点 Point of contact
瞬时接触线 Line of contact
端面啮合线 Transverse path of contact
啮合曲面 Surface of action
啮合平面 Plane of action
啮合区域 Zone of action
总作用弧 Total arc of transmission
端面作用弧 Transverse arc of transmission
纵向作用弧 Overlap arc
总作用角 Total angle of transmission
端面作用角 Transverse angle of transmission
纵向作用角 Overlap angle
总重合度 Total contact ratio
端面重合度 Transverse ratio
纵向重合度 Overlap ratio
标准齿轮 Standard gears
非变位齿轮 X-gero gear
标准中心距 Referencr centre distance
名义中心距 Nominal centre distance
分度圆柱面 Reference cylinder
节圆柱面 Pitch cylinder
基圆柱面 Basic cylinder
齿顶圆柱面 Tip cylinder
齿根圆柱面 Root cylinder
节点 Pitch point
节线 Pitch line
分度圆 Reference circle
节圆 Pitch circle
基圆 Basic circle
定位面 Locating face
外锥距 Outer cone distance
内锥距 Inner cone distance
中点锥距 Mean cone distance
背锥距 Back cone distance
安装距 Locating distance
轮冠距

Tip distance；crown to back
冠顶距 Apex to crown
偏置距 Offset
齿线偏移量 Offset of tooth trace
分锥角 Reference cone angle
节锥角 Pitch cone angle
顶锥角 Tip angle
根锥角 Root angle
背锥角 Back cone angle
齿顶角 Addendum angel
齿根角 Dedendum angle
任意点压力角 Pressure angle at a point
任意点螺旋角 Spiral angle at a point
中点螺旋角 Mean spiral angle
大端螺旋角 Outer spiral angle
小端螺旋角 Inner spiral angle
蜗杆 Worm
蜗轮 Worm wheel
蜗杆副 Worm gear pair
圆柱蜗杆 Cylindrical worm
圆柱蜗杆副 Cylindrical worm pair
环面蜗杆 Enveloping worm
环面蜗杆副 Enveloping worm pair
阿基米德蜗杆 Straight sided axial worm；ZA-worm
渐开线蜗杆 Involute helicoid worm；ZI-worm
法向直廓蜗杆 Straight sided normal worm；ZN-worm
锥面包络圆柱蜗杆 Milled helicoid worm；ZK-worm
椭圆齿轮 Elliptical gear
非圆齿轮副 Non-circular gear pair
圆柱针轮副 Cylindsical lantern pinion and wheel
针轮 Cylindsical tan tein gear ；pin-wheel
谐波齿轮副 Harmoric gear drive
波发生器 Wave generator
柔性齿轮 Flexspine
刚性齿轮 Circular spline
非圆齿轮 Non-circular gear
分度圆环面 Reference tosoid