研工(KinSoon)46寸户外高亮模组KSN460XN01-A03规格书

KSN460XN01-A03Product Specification Rev. 1.1
Model Name: KSN460XN01-A03
Issue Date: 2012/12/03 ()Preliminary Specifications (＊)Final Specifications
KSN
Page 1 / 32

KSN460XN01-A03Product Specification Rev. 1.1
Contents
No CONTENTS RECORD OF REVISIONS 1 2 3 3-1 3-2 3-3 3-4 3-5 3-6 3-7 4 5 5-1 6 7 7-1 7-2 8 8-1 8-2 8-3 9 9-1 9-2 9-3 9-4 9-5 9-6 9-7 GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATION ELECTRIACL CHARACTERISTICS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATION SIGNAL TIMING WAVEFORM COLOR INPUT DATA REFERENCE POWER SEQUENCE BACKLIGHT SPECIFICATION OPTICAL SPECIFICATION MECHANICAL CHARACTERISTICS PLACEMENT SUGGESTIONS RELIABILITY TEST ITEMS INTERNATIONAL STANDARD SAFETY EMC PACKING DEFINITION OF LABEL PACKING METHODS PALLET AND SHIPMENT INFORMATION PRECAUTION MOUNTING PRECAUTIONS OPERATING PRECAUTIONS ELECTROSTATIC DISCHARGE CONTROL PRECAUTIONS FOR STRONG LIGHT EXPOSURE STORAGE HANDLING PRECAUTIONS FOR PROTECT FILM OPERATING CONDITION IN PID APPLICATION
Page 2 / 32

KSN460XN01-A03Product Specification Rev. 1.1
Record of Revision
Version 0.0 0.1 Date 2011/06/23 2011/7/5 22 23 0.2 0.3 0.4 2011/07/25 2011/11/01 2011/11/02 4 4 24 24 24 4 4 21 21 0.5 2011/11/03 24 24 4 0.6 2012/02/16 4 22 23 0.7 0.8 0.9 2012/06/13 2012/07/26 2012/09/17 15 28 23 24 1.0 1.1 2012/10/22 2012/12/03 22 23 24 Page Description First preliminary spec sheet release Front View Drawing Update Read View Drawing Update Format change Format change Shock Level 30G to 10G. Vibration level from 1.0G to 0.5G Vibration duration from 10 min. to 30 min. Outline dimension correct from 1026.68 to 1023.68 Pixel pitch correct from 0.176 to 0.53 Outline dimension correct from 1026.68 to 1023.68 Weight correct from TBD to 9.9Kg. Random wave correct from 1.05G to 1.5G Drop height correct from 25.4cm to 17.8cm. Pixel pitch correct from 0.53 to 0.17675 X0.53025 Pixel pitch correct from 0.176 to 0.53025 Drawing update Drawing update Add power sequence of backlight (LED) Packing spec modify. Drawing update Drawing update Panel weight update Drawing update Drawing update
Page 3 / 32

KSN460XN01-A03Product Specification Rev. 1.1
1. General Description
This specification applies to the 46.0 inch Color TFT-LCD Module P460HVN01.0. This LCD module has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 46.0 inch. This module supports 1,920x1080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each dot. The KSN460XN01-A03has been designed to apply the 10-bit 2 channel LVDS interface method. The main feature of KSN460XN01-A03would be high brightness, high contrast, wide viewing angle, high color saturation, super narrow bezel, direct LED backlight and high color depth.
* General Information
Items Active Screen Size Display Area Outline Dimension Driver Element Display Colors Number of Pixels Pixel Pitch Pixel Arrangement Display Operation Mode Display Orientation Surface Treatment Note:
Specification 46.0 1018.08(H) x 572.67(V) 1023.68(H) x 578.27(V) x 37.5(D) a-Si TFT active matrix 10 bit (8bit+FRC), 1073.7M 1,920x1080 0.53025 (H) x 0.53025(W) RGB vertical stripe Normally Black Landscape/Portrait Enable AG
Unit Inch mm mm
Note
1
Colors Pixel mm
Haze = 11%
(1) Dmax: 54.2mm (Front bezel to Driver cover); Dmin: 37.5mm (Front bezel to Bezel back)
Page 4 / 32

KSN460XN01-A03Product Specification Rev. 1.1
2. Absoute Maximum Ratings
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item Logic/LCD Drive Voltage Input Voltage of Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature Note 1: Duration:50 msec.
Symbol Vcc Vin TOP HOP TST HST PST
Min -0.3 -0.3 0 10 -20 10
Max 14 4 +50 90 +60 90 65
Unit [Volt] [Volt] [ C] [%RH] [ C] [%RH] [ C]
o o o
Conditions Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 3
Note 2 : Maximum Wet-Bulb should be 39
℃ and No condensation.
.
℃℃ , the wet bulb temperature must not exceed 39 Note 3: Surface temperature is measured at 50℃ Dry condition
greater than 40
The relative humidity must not exceed 90% non-condensing at temperatures of 40
℃ or less. At temperatures
Page 5 / 32

KSN460XN01-A03Product Specification Rev. 1.1
3. Electrical Specification
The KSN460XN01-A03requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second is employed for LED driver.
3.1.1 Electrical Characteristics
Parameter LCD Power Supply Input Voltage Power Supply Input Current Power Consumption Inrush Current Permissible Ripple of Power Supply Input Voltage (for input power=12V) Input Differential Voltage Differential Input High Threshold LVDS Interface Voltage Differential Input Low Threshold Voltage Input Common Mode Voltage Input High Threshold Voltage VDD IDD PC IRUSH VRP 10.8 ---200 +100 12 0.9 10.8 -400 -13.2 1.08 12.96 5.5 VDD * 5% 600 +300 VDC A Watt A mVpk-pk mVDC mVDC 1 1 2 3 4 4 Symbol Value Min. Typ. Max Unit Note
∣V ∣
ID
VTH
VTL VICM VIH (High) VIL (Low) PBL
-300 1.1 2.7
-1.25 --
-100 1.4 3.3
mVDC VDC VDC
4 4
CMOS Interface
7 0 ---203 50000 0.6 VDC W -8
Input Low Threshold Voltage Backlight Power Consumption Life Time(MTTF)
3.1.2 AC Characteristics
Parameter Receiver Clock : Spread Spectrum Modulation range Receiver Clock : Spread Spectrum Modulation frequency Receiver Data Input Margin Fclk = 85 MHz Fclk = 65 MHz Symbol Value Min. Fclk -3% Typ. -Max Fclk +3% Unit Note
Fclk_ss
MHz
9
LVDS Interface
Fss
30
--
200
KHz
9
tRMG
-0.4 -0.5
---
0.4 0.5
ns
10
Page 6 / 32

KSN460XN01-A03Product Specification Rev. 1.1
Note : 1. Test Condition: (1) VDD = 12.0V (2) Fv = Type Timing, 60Hz, 120Hz or Other (3) FCLK = Max freq. (4) Temperature = 25
℃
(5) Test Pattern : White Pattern 2. Measurement condition : Rising time = 400us
90% VDD
GND
10% 400 μs
3. Test Condition: (1) The measure point of VRP is in LCM side after connecting the System Board and LCM. (2) Under Max. Input current spec. condition. 4. VICM = 1.25V
LVDS V IC M LVDS + V TH |V ID | V TL
GND
|V ID |
0V
|V ID |
5. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape, TFT-LCD Module have a low luminance and the inverter has abnormal action because leakage current occurs between lamp wire and conducting tape.
6. The relative humidity must not exceed 80% non-condensing at temperatures of 40 temperatures greater than 40 , the wet bulb temperature must not exceed 39
℃ ℃
℃
or less. At
. When operate at low
temperatures, the brightness of LED will drop and the life time of LED will be reduced. 7. The measure points of VIH and VIL are in LCM side after connecting the System Board and LCM.
Page 7 / 32

KSN460XN01-A03Product Specification Rev. 1.1
8. The lifetime (MTTF) is defined as the time which luminance of the LED is 50% compared to its original value. [Operating condition: Continuous operating at Ta = 25±2 ] 9. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures
℃
1/FSS F c l k _ s s (m a x )
Fclk
Fclk_ss(min)
10. Receiver Data Input Margin Parameter Input Clock Frequency Input Data Position0 Input Data Position1 Input Data Position2 Input Data Position3 Input Data Position4 Input Data Position5 Input Data Position6 Symbol Fclk tRIP1 tRIP0 tRIP6 tRIP5 tRIP4 tRIP3 tRIP2 Rating Min Fclk (min) -|tRMG| T/7-|tRMG| 2T/7-|tRMG| 3T/7-|tRMG| 4T/7-|tRMG| 5T/7-|tRMG| 6T/7-|tRMG| Type -0 T/7 2T/7 3T/7 4T/7 5T/7 6T/7 Max Fclk (max) |tRMG| T/7+|tRMG| 2T/7+|tRMG| 3T/7+|tRMG| 4T/7+|tRMG| 5T/7+|tRMG| 6T/7+|tRMG| Unit MHz ns ns ns ns ns ns ns Note T=1/Fclk
tRIP2 tRIP3 tRIP4 tRIP5 tRIP6 tRIP0 tRIP1 LVDS-Rx Input Data LVDS-Rx Input Clock Rx3 Rx2 Rx1 Rx0 Rx6 Rx5 Rx4 Rx3 Rx2 Rx1 Rx0 Rx6
Vdiff = 0V 1/Fclk=T
Page 8 / 32

KSN460XN01-A03Product Specification Rev. 1.1
3.2 Interface Connections
LCD connector : 187059-51221(Manufactured by P-TWO);
PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Symbol VCC VCC VCC VCC VCC GND GND GND GND RXON0 RXOP0 RXON1 RXOP1 RXON2 RXOP2 GND Description 12V Power Supply 12V Power Supply 12V Power Supply 12V Power Supply 12V Power Supply GND GND GND GND LVDS Odd pixel data input pair 0(-) LVDS Odd pixel data input pair 0(+) LVDS Odd pixel data input pair 1(-) LVDS Odd pixel data input pair 1(+) LVDS Odd pixel data input pair 2(-) LVDS Odd pixel data input pair 2(+) GND LVDS Odd pixel clock input pair(-) LVDS Odd pixel clock input pair(+) GND 45 20 21 22 23 24 25 26 RXON3 RXOP3 RXON4 RXOP4 GND RXEN0 RXEP0 LVDS Odd pixel data input pair 3(-) LVDS Odd pixel data input pair 3(+) LVDS Odd pixel data input pair 4(-) LVDS Odd pixel data input pair 4(+) GND LVDS Even pixel data input pair 0(-) LVDS Even pixel data input pair 0(+) 46 47 48 49 50 51 NC NC NC Reserved Reserved Reserved LVDSORD High or NC PIN 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 Symbol RXEN1 RXEP1 RXEN2 RXEP2 GND RXENCLK RXEPCLK GND RXEN3 RXEP3 RXEN4 RXEP4 GND NC Reserved NC NC NC Description LVDS Even pixel data input pair 1(-) LVDS Even pixel data input pair 1(+) LVDS Even pixel data input pair 2(-) LVDS Even pixel data input pair 2(+) GND LVDS Even pixel clock input pair(-) LVDS Even pixel clock input pair(+) GND LVDS Even pixel data input pair 3(-) LVDS Even pixel data input pair 3(+) LVDS Even pixel data input pair 4(-) LVDS Even pixel data input pair 4(+) GND No connected KSN Internal Use Only No connected No connected No connected Select LVDS data order:
17 RXONCLK 18 RXOPCLK 19 GND
→ NS, Low → JEIDA
No connected No connected No connected KSN Internal Use Only KSN Internal Use Only KSN Internal Use Only
Note 1: All GND (ground) pins should be connected together and should also be connected to the LCD’s metal frame. Note 2: All VDD (power input) pins should be connected together. Note 3: All NC (no connection) pins should be open without voltage input.
Page 9 / 32

KSN460XN01-A03Product Specification Rev. 1.1
LVDS Option = High/Open
NS
P r e v io u s C y c le C lo c k
C u r r e n t C y c le
N e x t C y c le
C H x_0+ C H x_0-
R1
R0
G0
R5
R4
R3
R2
R1
R0
G0
C H x_1+ C H x_1-
G2
G1
B1
B0
G5
G4
G3
G2
G1
B1
C H x_2+ C H x_2-
B3
B2
DE
NA
NA
B5
B4
B3
B2
DE
C H x_3+ C H x_3-
R7
R6
NA
B7
B6
G7
G6
R7
R6
NA
C H x_4+ C H x_4-
R9
R8
NA
B9
B8
G9
G8
R9
R8
NA
Note: x = 1, 2, 3, 4…
LVDS Option = Low
P r e v io u s C y c le C lo c k
JEIDA
C u r re n t C y c le N e x t C y c le
C H x_0+ C H x_0-
R5
R4
G4
R9
R8
R7
R6
R5
R4
G4
C H x_1+ C H x_1-
G6
G5
B5
B4
G9
G8
G7
G6
G5
B5
C H x_2+ C H x_2-
B7
B6
DE
NA
NA
B9
B8
B7
B6
DE
C H x_3+ C H x_3-
R3
R2
NA
B3
B2
G3
G2
R3
R2
NA
C H x_4+ C H x_4-
R1
R0
NA
B1
B0
G1
G0
R1
R0
NA
Note: x = 1, 2, 3, 4…
Page 10 / 32

KSN460XN01-A03Product Specification Rev. 1.1
3.3 Signal Timing Specification
This is the signal timing required at the input of the user connector. All of the interface signal timing should be satisfied with the following specifications for its proper operation.
Timing Table (DE only Mode) Vertical Frequency Range (60Hz)
Signal Item Period Vertical Section Active Blanking Period Horizontal Section Active Blanking Clock Vertical Frequency Horizontal Frequency Frequency Frequency Frequency Symbol Tv Tdisp (v) Tblk (v) Th Tdisp (h) Tblk (h) Fclk=1/Tclk Fv Fh 70 50 47 60 10 1030 Min. 1090 Typ. 1125 1080 45 1100 960 140 74.25 60 67.5 365 82 63 73 400 1325 Max 1480 Unit Th Th Th Tclk Tclk Tclk MHz Hz KHz
Notes: (1) Display position is specific by the rise of DE signal only. Horizontal display position is specified by the rising edge of 1 DCLK after the rise of 1 DE, is displayed on the left edge of the screen. (2)Vertical display position is specified by the rise of DE after a “Low” level period equivalent to eight times of horizontal period. The 1 data corresponding to one horizontal line after the rise of 1 DE is displayed at the top line of screen. (3)If a period of DE “High” is less than 1920 DCLK or less than 1080 lines, the rest of the screen displays black. (4)The display position does not fit to the screen if a period of DE “High” and the effective data period do not synchronize with each other.
st st st st
Page 11 / 32

KSN460XN01-A03Product Specification Rev. 1.1
Tv Tblk(v) Th DE Tdisp(v) N L in e
Line N
M pixel
RGB Data
Invalid Data
Line N
Line 1
Line 2
Line 3
Line 4
Invalid Data
CLK Tclk Th Tdisp(h) DE Tblk(h)
3.4 Signal Timing Waveforms
CH2
Pixel M-6
Pixel M-4
Pixel M-2
Pixel M
Invalid Data
Pixel 2
Pixel 4
Pixel 6
Pixel 8
Pixel 10
Pixel 12
Pixel M-4
Pixel M-2
Pixel M
Invalid Data
Pixel 2
Pixel 4
Page 12 / 32
CH1
Pixel M-7
Pixel M-5
Pixel M-3
Pixel M-1
Invalid Data
Pixel 1
Pixel 3
Pixel 5
Pixel 7
Pixel 9
Pixel 11
Pixel M-5
Pixel M-3
Pixel M-1
Invalid Data
Pixel 1
Pixel 3

KSN460XN01-A03Product Specification Rev. 1.1
3.5 Color Input Data Reference
The brightness of each primary color (red, green and blue) is based on the 10 bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. COLOR DATA REFERENCE Input Color Data Color RED MSB LSB MSB GREEN LSB MSB BLUE LSB
R9 R8 R7 R6 R5 R4 R3 R2 R1 R0 G9 G8 G7 G6 G5 G4 G3 G2 G1 G0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 Black Red(1023) Green(1023) Basic Blue(1023) Color Cyan Magenta Yellow White RED(000) RED(001) R ---RED(1022) RED(1023) GREEN(000) GREEN(001) G ---GREEN(1022) 0 GREEN(1023) 0 BLUE(000) BLUE(001) B ---BLUE(1022) BLUE(1023) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 1 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Page 13 / 32

KSN460XN01-A03Product Specification Rev. 1.1
3.6 Power Sequence Power Sequence of LCD
90% 90% 10% 10%
P o w e r S u p p ly F o r L C D V D D (+ 12 V )
G ND
10%
t1
t2
t5
t6
t7
In t e r fa c e S ig n a l ( L V D S D a ta & C L K )
G ND
V a l id D a ta
t3
t4
B a c k lig h t o n /o ff c o n tro l s ig n a l (V B L O N )
GND
t8
t9
C M O S In te rf a c e S ig n a l
G ND
Parameter t1 t2 t3 t4 t5 t6 t7 t8 t9
Values Min. 0.4 0.1 450 0
*1
Type. -------------------
Max. 30 50 --------*2
Unit ms ms ms ms ms ms ms ms ms
0 --500 10 0
--50 ---
Note: (1) t4=0 : concern for residual pattern before BLU turn off. (2) t6 : voltage of VDD must decay smoothly after power-off. (customer system decide this value)
Page 14 / 32

KSN460XN01-A03Product Specification Rev. 1.1
Power Sequence of Backlight
24V(typ.)
90% 10%
90% 10%
Power Input for BLU (VDDB)
T1
Valid Dimming Control Signal (V_IPWM,V_EPWM)
T2
T5 T6
T7
T3
T4
BLU On/Off Enable (VBLON)
Dip condition
Power Input for BLU (VDDB)
T8
VDDB(typ.)*0.8
Parameter Min T1 T2 T3 T4 T5 T6 T8 20 500 250 0 1
Value Typ Max 10
Units ms ms ms ms ms ms Ms
*1
Page 15 / 32

KSN460XN01-A03Product Specification Rev. 1.1
3.7 Backlight Specification
The backlight unit contains 220pcs LED.
3.7.1 Electrical specification
Spec Item 1 2 3 4 Input Voltage Input Current Input Power Inrush Current Symbol VDDB IDDB PDDB IRUSH ON 5 On/Off control voltage VBLON OFF VDDB=24V 0 VDDB=24V MAX 7 Dimming Control Voltage V_DIM MIN 8 9 Dimming Control Current Internal Dimming Ratio External PWM Control Voltage External PWM Control Current I_DIM DIM_R MAX V_EPWM MIN I_EPWM D_EPWM F_EPWM HI 14 15 DET status signal Input Impedance DET LO Rin VDDB=24V VDDB=24V 0 300 0.8 VDC Kohm VDDB=24V VDDB=24V VDDB=24V VDDB=24V 0 5 140 180 0.8 2 100 240 mADC % Hz VDC VDDB=24V VDDB=24V VDDB=24V VDDB=24V 5 2 0 2 100 5.5 VDC 3 VDC mADC % 3.1 0.8 1.5 5.5 mA VDC Condition Min VDDB=24V VDDB=24V VDDB=24V 22.8 --2 Typ 24 8.49 203.8 Max 25.2 8.9 213.5 11 5.5 VDC VDC ADC W ADC 1 1 2 Unit Note
6
On/Off control current
IBLON
10
11
12 External PWM Duty ratio 13 External PWM Frequency
Open Collector
Note 1 : Dimming ratio= 100% (MAX) Ta=25±5 , Turn on for 45minutes Note 2: Measurement condition Rising time = 20ms (VDDB : 10%~90%) and at dimming ration = 100% Note 3: Less than10% dimming control is functional well and no backlight shutdown happened
（
℃
）
Page 16 / 32

KSN460XN01-A03Product Specification Rev. 1.1
3.7.2 Input Pin Assignment
LED driver board connector: Pin 1 2 3 4 5 6 7 8 9 10 11 Symbol VDDB VDDB VDDB VDDB VDDB BLGND BLGND BLGND BLGND BLGND DET Description Operating Voltage Supply, +24V DC regulated Operating Voltage Supply, +24V DC regulated Operating Voltage Supply, +24V DC regulated Operating Voltage Supply, +24V DC regulated Operating Voltage Supply, +24V DC regulated Ground and Current Return Ground and Current Return Ground and Current Return Ground and Current Return Ground and Current Return BLU status detection: Normal : 0~0.8V ; Abnormal : Open collector BLU On-Off control: 12 VBLON BL On : High/Open (2V~5.5V); BL off : Low (0~0.8V/GND) 13 14 VDIM PDIM Internal PWM (0~3.3V for 10~100% Duty, open for 100%) < NC ; at External PWM mode> External PWM (5%~100% Duty, open for 100%) < NC ; at Internal PWM mode>
Page 17 / 32

KSN460XN01-A03Product Specification Rev. 1.1
LED driver board connector:
Pin 1 2 3 4 5 6 7 8 9 10 11 12
Symbol VDDB VDDB VDDB VDDB VDDB BLGND BLGND BLGND BLGND BLGND NC NC
Description Operating Voltage Supply, +24V DC regulated Operating Voltage Supply, +24V DC regulated Operating Voltage Supply, +24V DC regulated Operating Voltage Supply, +24V DC regulated Operating Voltage Supply, +24V DC regulated Ground and Current Return Ground and Current Return Ground and Current Return Ground and Current Return Ground and Current Return No connection No connection
(Note*) IF External PWM function includes 5% dimming ratio. Judge condition as below: (1) Backlight module must be lighted ON normally. (2) All protection function must work normally. (3) Uniformity and flicker could NOT be guaranteed
Page 18 / 32

KSN460XN01-A03Product Specification Rev. 1.1
4. Optical Specification
Optical characteristics are determined after the unit has been ‘ON’ and stable for approximately 45 minutes in a dark environment at 25° C while panel is placed in the default position. The default position is T-con side as the top side of panel. The value specified is at an approximate distance 50cm from the LCD surface at a viewing angle of φ and θ equal to 0° .
Fig.1 presents additional information concerning the measurement equipment and method.
SR3 or equivalent
Parameter Contrast Ratio Surface Luminance (White) Luminance Variation Response Time (G to G) Color Gamut Color Coordinates Red
Symbol Min. CR LWH δWHITE(9P) Tγ NTSC 3200 1800 ---
Values Typ. 4000 Max --1.33 --
Unit
Notes 1
2000
-6.5 72
cd/m
2
2 3
Ms %
4
RX RY
0.640 0.330 0.320 Typ.-0.03 0.620 0.150 0.050 0.280 0.290 5 Typ.+0.03
Green
GX GY
Blue
BX BY
White
WX WY
Viewing Angle x axis, right(φ=0° ) x axis, left(φ=180° ) y axis, up(φ=90° ) y axis, down (φ=270° ) θr θl θu θd ----89 89 89 89 ----degree degree degree degree
Page 19 / 32

KSN460XN01-A03Product Specification Rev. 1.1
Note: 1. Contrast Ratio (CR) is defined mathematically as: Contrast Ratio= Surface Luminance of Lon5 Surface Luminance of Loff5
2. Surface luminance is luminance value at point 5 across the LCD surface 50cm from the surface with all pixels displaying white. From more information see FIG 2. When lamp current IH = 11mA. the luminance with all pixels displaying white at center 5 location. 3. The variation in surface luminance, δWHITE is defined (center of Screen) as: δWHITE(9P)= Maximum(Lon1, Lon2,…,Lon9)/ Minimum(Lon1, Lon2,…Lon9) 4. Response time T LWH=Lon5 where Lon5 is
γ is the average time required for display transition by switching the input signal for five
Target 0%
25% to 0% 50% to 0% 75% to 0% 100% to 0% 50% to 25% 75% to 25% 100% to 25% 75% to 50% 100% to 50% 100% to 75%
luminance ratio (0%,25%,50%,75%,100% brightness matrix) and is based on Fv=60Hz to optimize.
Measured Response Time 0% 25% Start 50% 75% 100% 25%
0% to 25%
50%
0% to 50% 25% to 50%
75%
0% to 75% 25% to 75% 50% to 75%
100%
0% to 100% 25% to 100% 50% to 100% 75% to 100%
4. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG4.
FIG. 2 Luminance
V
H/2
1
2
3
4
5
6
H
7
8
9
H/6 V/6 V/2
Page 20 / 32