Microflexis Standard microfluidic chips

[+][+] The standard microfluidic chips are made of polycarbonate and polystyrene with a variety of

microchannel configurations in the 25mm x 75mm slide format. The microfluidic chips are elastically flexible like as conventional polymeric films. The polycarbonate chips are as thin as 250μm, 180μm and 130μm. The polystyrene chips are as thin as 450μm. The microfluidic channels of the chips have 200μm x 50μm cross-section and ?700μm inlets/outlets. The inlet/outlets are interfaced with appropriate microfluidic chip holder adapters. These standard microfluidic chips are sold in packs of 4 pcs.

We also offer standard microfluidic chips of the I1 channel geometry in the mini-formats of 11mm x 25mm. The chips are as thin as 450μm and made of polystyrene. The microfluidic channel of the chips has 1000μm x 70μm cross-section (at 1μl volume) and ?1000μm inlet/outlets. The mini-format standard microfluidic chips are sold in packs of 10 pcs at extra-low prices.

The standard microfluidic chips can be made with Luer or barb adapters at the channel inlet/outlets by request.

For first time orders, we offer free chip samples for training. We can also provide chip samples

for preliminary testings of innovative microfluidic applications.

T1 (T-junction)

I2 (double straight channel)

S1 (S-channel)

YS1 (Y-junction with S-channel) YS2 (chicken-foot junction with S-channel)