煤峪口矿主采煤层瓦斯压力测试与分析

龙源期刊网 https://www.360docs.net/doc/9d6516556.html,

煤峪口矿主采煤层瓦斯压力测试与分析

作者:陈瑞锋

来源:《价值工程》2014年第06期

摘要:煤层的瓦斯压力是矿井瓦斯基本参数之一,准确测定煤层瓦斯压力具有重要意

义。测压过程主要包括:选择测定地点和测定方法、开掘钻孔、封孔以及压力的观测确定。本文通过对煤峪口煤矿的瓦斯压力测试得出了由于产量大导致绝对瓦斯涌出量大,相对量小的这类矿井直接法不能准确测出瓦斯压力,应该用间接法测得的结论。

Abstract: The gas pressure of coal seam is one of the basic mine gas parameters, and the accurate determination of coal seam gas pressure has important significance. Manometry processes include: selecting the measurement location and method, digging drilling, sealing and determining the observed pressure. Based on the gas pressure test of Meiyukou coal mine, this paper gets a conclusions that large yields causes absolute volume of gas emission, a relatively small amount direct method of such mines can not accurately measure the gas pressure, and the indirect method should be used.

关键词:瓦斯压力;测压钻孔;煤层透气性

Key words: gas pressure;manometry drilling;gas permeability of coal seam

中图分类号:TD712 文献标识码:A 文章编号:1006-4311(2014)06-0118-02

0 引言

同煤集团煤峪口煤矿,开采侏罗系煤层,主采煤层11#、12#、14#层,各煤层平均厚度为4.29m,2.39m,2.11m。煤层顶板岩石均属极坚固岩石。矿井瓦斯绝对涌出量为

21.04m3/min,瓦斯相对涌出量为3.95m3/t,二氧化碳绝对涌出量为52.78m3/min,二氧化碳相对涌出量为9.91m3/t,为高瓦斯矿井。11#、12#层410盘区的采煤工艺为一次采全高低位放顶煤工作面,开采强度较大,瓦斯涌出量相对较高(绝对瓦斯涌出量占全矿井瓦斯涌出总量的53.1%)。因此在11#、12#合并层410盘区回采工作面设计时,均沿煤层顶板设置顶回风巷以解决工作面上隅角瓦斯问题。全矿没有煤层瓦斯基础参数,所以进行本次煤层瓦斯基础参数测试。

1 煤层瓦斯压力测定

煤层瓦斯压力的测定原理是通过钻孔揭露煤层,安设测定仪表并密封钻孔,利用煤层中瓦斯的自然渗透原理测定在钻孔揭露处达到平衡的瓦斯压力。根据煤峪口矿的煤层开采情况,14#煤层目前无测定原始煤层瓦斯基础参数的条件,故只对11#与12#合并层瓦斯压力进行测

相关文档
最新文档