HDMI Compliance Test Information

HDMI Compliance Test Information

April, 2012

目 錄

1. 簡稱說明:---------------------------------------Page. 3

2. 認證申請方式:---------------------------------------Page. 4

3. 測試產品提交:---------------------------------------Page. 5

4. Report和認證書取得:---------------------------------------Page. 6

5. 產品種類:---------------------------------------Page. 7

6. Test Procedure Reference:---------------------------------------Page. 8

7. CDF Form填寫:---------------------------------------Page. 9

8. CDF Form填寫常見錯誤注意事項:---------------------------------------Page. 10

Information工作表:---------------------------------------Page. 10 Family工作表:---------------------------------------Page. 10 General工作表:---------------------------------------Page. 11 Source CDF工作表:---------------------------------------Page. 12 Sink CDF工作表:---------------------------------------Page. 13 Repeater CDF工作表:---------------------------------------Page. 16 Rptr-Mini-Source工作表:---------------------------------------Page. 17 Rptr-Mini-Sink工作表:---------------------------------------Page. 18 9.Test Item:---------------------------------------Page. 21

Source device :---------------------------------------Page. 22 Sink device :---------------------------------------Page. 23 Repeater device :---------------------------------------Page. 24 10.其它注意事項:---------------------------------------Page. 25

1. 簡稱說明:

HDMI:High-Definition Multimedia Interface

CEC:Consumer Electronics Control

HEC:HDMI Ethernet Channel

ARC:Audio Return Channel

HEAC:HDMI Ethernet and Audio Return Channel

CTS:Compliance Test Specification

ATC:Authorized Test Center

HDCP:High-Bandwidth Digital Content Protection CDF Form:Capability Declaration Form

HDMI LLC:HDMI Licensing, LLC.

Allion:Allion Labs, Inc.

2. 認證申請方式:

a.Self-Test

a1.ITE Lab + Allion Lab pre-test，ITE發出pass repor之後由客戶自行向HDMI協會

提交認證申請。

a2.另一種選擇Allion Lab pre-test, Allion發出pass report之後由客戶自行向HDMI協會

提交認證申請。

b.ATC Test

b1.SONY ATC Lab verification test，SONY ATC in Taiwan Allion Lab，並發出pass report 和認證書。

b2.SHANGHAI or SHENZHEN ATC Lab verification test，並發出pass report和認證書。

c.政策:HDMI測試認證規範中規定，三個類型中(Sink, Source, Repeater)每類的第一次送測

產品，則屬於First Model，都須通過ATC的測試才能獲得使用HDMI徽標的權利，

而後續機種(Subsequent Model)則可在自我測試(Self-test)後，再將測試結果送交

HDMI Licensing, LLC審核即可。

3. 測試產品提交:

a.請ITE業務幫忙安排測試事宜。

b.待測物準備:

b1.待測設備(附件: Adapter、遙控器…等)。

b2.操作說明。

b3.輔助材料設備。

c.填寫並提供最新的CDF Form。

d.將sample寄送到ITE test Lab。

e.由Allion self-test、SONY ATC、SHANGHAI ATC or SHENZHEN ATC Lab verification 測試者

請將sample寄到相關Lab.

4. Report和認證書取得:

a.採用Self-test，請提交準備好的待測device和填寫CDF form(Capability Declaration Form)送到ITE Lab。

b.ITE in-house per-test，測試結束後有fail item，就必須先debug pass，然後才會安排送進Allion test。

c.Allion test， fail時一樣也會在現場debug pass。

d.將兩個Lab(ITE+Allion)所測試的結果整理撰寫pass report，然後由ITE發出給客戶，客戶就可以用此

pass report提交給HDMI Licensing, LLC申請認證。

e.ITE self-test pass report可以確保客戶在向HDMI Licensing，LLC申請時是有效的可以被承認的可以

拿到認證書，有國內外多數知名客戶均採用，甚至大廠的公板合作方案也採用。

5. 產品種類:

a.Source device，例如: DVD player、Graphic card、Set-Top Box …等。

b.Sink device，例如: LED TV、LCD monitor、Projector …等。

c.Repeater device，例如: n to 1 Switch KVM、n to m Splitter、n to 1 Sound Box 、n to 1 Wireless Repeater…等。

6. Test Procedure Reference:

a.High-Definition Multimedia Interface Compliance Test Specification Version 1.4b

b.Capabilities Declaration Form 1.4b (CDF Form 1.4b)

7. CDF Form填寫:

a.Source device - 請填寫Information、General、Source_CDF工作表。

b.Sink device - 請填寫Information、General、Sink_CDF工作表。

c.Repeater device - 請填寫Information、General、Repeater_CDF、Rptr_Mini_Source、Rptr_Mini_Sink工作表。

8. CDF Form填寫常見錯誤注意事項:

a.請將產品的實際支援的功能一併填上CDF form，才可做一次完整性的測試。

Information工作表:

a.第3、4列為ATC Lab使用，不填寫。

b.第9 ~ 15列請填寫此次認證產品的一般相關訊息。

c.第20 ~ 31列請填寫此次認證產品的連繫負責人相關訊息。

Family工作表:

a.基於下列原因(b項)所以不填寫。

b.HDMI Family model申請請參照ATC於2010/03/17的通知:

NOTE: Family model is not allowed for self-testing. Family model is only valid for ATC tested

products. This is nothing new, It's an existing rule that was not enforced in the past and will

be enforced starting March 17,2010.

General 工作表:

a.第11 ~ 19列請填寫這個產品使用到的HDMI connectors 資訊，所有的要申請測試的Device ，

其Connectors 皆須是通過測試的並且在HDMI Licensing, LLC website 中的 Approved Connector List 可被查詢的到。提供的HDMI connectors 為沒認證過的則不會進行測試，將無法申請認證。For details, refer to following URL:

https://www.360docs.net/doc/d612827737.html,/manufacturer/approved_connectors.aspx

11列

12列13列

All HDMI Port

b.第36列在CTS 中規定，如果產品有支援HDCP 的功能，則須通過HDCP 的相容測試。

HDMI CTS 測試並不是和HDCP 測試必須合併在一起測試，兩者分別是獨立的，最後的認證協會

分屬不同的機構，HDMI CTS 可以選擇不支援HDCP ，這樣就不必測試HDCP 。如果有支援HDCP ，依據送認證方式有不同的做法:

b1.申請ATC test 則ATC 會一起做測試，不然就要自己先提交已過HDCP 認證的report 給ATC 。b2.申請Self-Test 則分別做測試，等拿到HDMI 和HDCP 的pass report 後再一起提交給HDMI 協會

即可。

b3.HDCP 認證測試機構在台灣的是Allion Lab ，通過測試就會主動幫助客戶提交給HDCP 協會

取得認證。

b4.HDCP 認證測試沒有Self-Test 模式，一定要到官方認可的測試機構取得認證，

例如 : Allion or Other ATC Labs 。

b5.測試費用是分別收費的，HDMI CTS 一種費用，HDCP 另一種費用。CTS 選擇支援HDCP 請依照下列方式寫。36列

Y/N

Y

CTS 選擇不支援HDCP 請依照下列方式寫。36列

Y/N

N

Conn_Vendor_1

Conn_Model_Name_1Connector Vendor Name:

Connector Model Name or ID:

On which port(s) is this connector found?

Is HDCP supported on the product?

HDCP_Supported

HDCP_Supported

Is HDCP supported on the product?

Conn_1_Port_Number_s

Main Super

Enterprises Co.,Ltd.ADAB9019K0

Source CDF工作表:

a.第16列YCbCr支援，當device有其它analog component有能力傳輸YCbCr Pixel Encoding那就必須要

支援。當device只有HDMI連接器時就可以選擇不支援或是支援。

For details, refer to following HDMI specification 1.4b第106頁第6.2.3章節。

16列

Y/N Y

b.第26 ~ 43列當產品有支援Deep Color請依照下列方式寫。

有支援Deep Color就必須是30 bit和36 bit都一定要，不可以只有支援30 bit。

For details, refer to following HDMI CTS 1.4b Test ID:8-3章節的第217頁的敘述如下:

If byte 6, bits 4 or 6 (DC_48bit or DC_30bit) equals 1 and bits 5 (DC_36bit) equals 0 then FAIL,

"DC_30bit or DC_48bit supported without default DC_36bit supported."

26列Y/N Y

27列Y/N Y

28列N, 24 bit, 30 bit, 36 bit,

and/or 48 bit

29列N, 24,

30, 36,

48 bit

24,30,36

bit

30列N, 24,

30, 36,

48 bit

24,30,36

bit

c.第26 ~ 43列當產品不支援Deep Color請依照下列方式寫。

26列Y/N N 27列Y/N N

28列N, 24 bit, 30 bit, 36 bit,

and/or 48 bit

29列N, 24,

30, 36,

48 bit

24 bit

30列

N, 24,

30, 36,

48 bit

24 bit Source_HDMI_YCbCr Will the product transmit an HDMI video signal

using YCbCr (4:4:4 or 4:2:2) pixel encoding under

some conditions (user selection, EDID indication

etc.)?

2 720x480p/60Hz 4:3

2 720x480p/60Hz 4:3

Source_Above_165

Does the product support any video format/color

mode with a TMDS clock frequency above

165MHz?

Source_Deep_Color Does the product support any Deep Color modes?

Source_Video_Formats

Does the product support any video format/color

mode with a TMDS clock frequency above

165MHz?

Which HDMI video formats are supported by the

product and at which color depths?(Select

supported items below.)

CEA Video ID Code (VIC) 1 640x480p/60Hz 4:3

Source_Above_165

Source_Deep_Color Does the product support any Deep Color modes?

Source_Video_Formats

Which HDMI video formats are supported by the

product and at which color depths?(Select

supported items below.)

CEA Video ID Code (VIC) 1 640x480p/60Hz 4:3

Sink CDF 工作表:

a.第13 ~ 14列，Impedance 測試依據ITE chip 的特性請依照下列方式寫。ITE chip 內部特性:

Other chip 內部特性:

根據CDF 的敘述裡提到 “Does the product require that power is applied when termination impedance is measured?”，因此如果要量到IC 裡的termination impedance 的話必需power on 的模式下(在MOS 是

導通的情況)，所以Sink_Diff_PowerOn 要填成 [ Y ]。之後再去參照CTS ID 8-8裡的敘述如下:

“If CDF field Sink_Diff_PowerOn is Y: Measure the impedance value along the tested signal path, from the Sink DUT HDMI input connector to the input pins of the HDMI receiver, Zdiff_through. This is indicated in CDF field Sink_Term_Distance.”，從這裡可以知道如果

如果IC 裡的termination impedance 必需power on 的模式下才能量到的話(Sink_Diff_PowerOn is Y)，CTS 只要求當DUT 在Power off 模式下用TDR 去量從HDMI connector 到RX pin 腳(也就是到開路的地方)，這就是ZDIFF_THROUGH 的量測，同時這也是Sink_Term_Distance ，

也就是HDMI Connector 到HDMI IC pin 腳的距離(單位是nsec)。請特別注意

Impedance

測試都是DUT 在Power off 下做測試。14列Y/N

Y 15列

number>

IN1_D0:970p s

D1:920p s

D2:900p s

CK:1040ps IN2_D0:640p s

D1:600p s

Sink_Term_Distance

If Sink_Diff_PowerOn is 'Y' then: For an impedance measurement, what is the length that can be correctly measured with power off? The

length is defined as the number of nsecs it takes for

a pulse to travel from the input connector, begin to reflect from the termination impedance, and travel back to the input connector.

Sink_Diff_PowerOn

Does the product require that power is applied when termination impedance is measured?

b.第18 ~ 21列和第24列和第66 ~ 67列當產品有支援Deep Color請依照下列方式寫。

有支援Deep Color就必須是30 bit和36 bit都一定要，不可以只有支援30 bit。

For details, refer to following HDMI CTS 1.4b Test ID:8-3章節的第217頁的敘述如下:

If byte 6, bits 4 or 6 (DC_48bit or DC_30bit) equals 1 and bits 5 (DC_36bit) equals 0

then FAIL, "DC_30bit or DC_48bit supported without default DC_36bit supported."

18列Y/N Y 19列

Y/N Y 20列

Y/N Y 21列

Y/N N 24列

Y/N Y 66列

222.75

67列

1920x10

80

60Hz,

36-bit

Does the product support Deep Color?

Does the product support Deep Color at 30 bits per

pixel?

Does the product support Deep Color at 36 bits per

pixel?

Does the product support Deep Color at 48 bits per

pixel?

Sink_Deep_Color

Sink_DC_30bit

Sink_DC_36bit

Sink_DC_48bit

Any value, e.g.

74.25, 148.5,

222.75, etc.

e.g. 1600x1200

60Hz, 24-bit

Does the product support any video format and

color mode combination with a TMDS clock

frequency above 165MHz?

Sink_Above_165

Sink_Max_TMDS_Clock What is the maximum TMDS clock frequency

supported by the product?

If max frequency is other than 27 and 74.25MHz,

what video format and color depth are supported at

this max frequency?

c.第18 ~ 21列和第24列和第66 ~ 67列當產品不支援Deep Color 請依照下列方式寫。18列Y/N

N 19列

Y/N N

20列

Y/N N

21列

Y/N N

24列

Y/N

N

66列

148.5

67列

1920x108060Hz,24-bit

d.第31列此 640x480p/60Hz 4:3 format 為CTS ID 8-23要求必須測試，所以一定要支援，

請依照下列方式寫。

30列31列

Y/N

Y

e.第46列除了Sink_CDF 第31 ~ 45列之外還有其它的額外format 要支援的話，請填寫要支援的format 的VIC 碼，請依照下列方式寫。

CEA format

numbers or "none"

32,33,34

f.第74 ~ 89列請填寫Sink input port 的名稱，也就是DUT 外殼上的名稱 or OS MENU 上的名稱。

Sink_Above_165

Sink_DC_48bit

Does the product support Deep Color at 48 bits per pixel?

Does the product support any video format and color mode combination with a TMDS clock frequency above 165MHz?

Sink_DC_30bit

Does the product support Deep Color at 30 bits per pixel?

Sink_DC_36bit Does the product support Deep Color at 36 bits per pixel?

If max frequency is other than 27 and 74.25MHz,what video format and color depth are supported at this max frequency?

e.g. 1600x120060Hz, 24-bit Sink_Deep_Color Does the product support Deep Color?

Sink_Max_TMDS_Clock

What is the maximum TMDS clock frequency supported by the product?

Any value, e.g.74.25, 148.5,222.75, etc.

Which HDMI "Primary" video formats are

supported by the product?(Select supported items below.)

1: 640x480p/60Hz 4:3

Which other CEA video formats (not listed above)are supported by the product?Sink_Video_Formats

Sink_Additional_Formats

Repeater CDF工作表:

a.第19 ~ 32列請填寫Repeater Device所支援的功能，可以複選，例如同時有Convert和Switch的功能

，這兩者就可以同時填寫 [ Y ]。

Y/N Y

Y/N Y

b.第39 ~ 40列Physical Address如果為copy模式寫入到EDID，請如下填寫。

39列

Y/N Y

40列

Y/N N

c.第39 ~ 40列Physical Address如果為Increment模式寫入到EDID，請如下填寫。

39列

Y/N N

40列

Y/N Y

Does the product include a 'Convert' processing

block?

Does the product include a 'Switch' processing

block?

Does Physical Address simply get copied from the

Sink to the internal EDID (simple repeater case)?

Does Physical Address simply get incremented for

each input port?

Repeater_PA_Copy

Repeater_PA_Increment

A single A/V signal is selected from multiple

Sources.

EDID from the Sink passes unmodified from Sink

to Source.

Repeater_Convert

Repeater_Switch

Repeater_PA_Copy Does Physical Address simply get copied from the

Sink to the internal EDID (simple repeater case)?

Repeater_PA_Increment Does Physical Address simply get incremented for

each input port?

A/V signal is converted from format X to format Y.

This could be, for instance, a video format

conversion from HD to SD.

EDID corresponding to format Y would be present

on the Sink and the EDID presented to the Source

would include format X.

Rptr-Mini-Source工作表:

a.第15列YCbCr支援，當device有其它analog component有能力傳輸YCbCr Pixel Encoding那就必須要

支援。當device只有HDMI連接器時就可以選擇不支援或是支援。

For details, refer to following HDMI specification 1.4b第106頁第6.2.3章節。

15列

Y/N Y

b.第24 ~ 41列當產品有支援Deep Color請依照下列方式寫。

有支援Deep Color就必須是30 bit和36 bit都一定要，不可以只有支援30 bit。

For details, refer to following HDMI CTS 1.4b Test ID:8-3章節的第217頁的敘述如下:

If byte 6, bits 4 or 6 (DC_48bit or DC_30bit) equals 1 and bits 5 (DC_36bit) equals 0 then FAIL,

"DC_30bit or DC_48bit supported without default DC_36bit supported."

24列

Y/N Y

25列Y/N Y

26列N, 24 bit, 30 bit, 36 bit, and/or 48 bit

27列N, 24,

30, 36,

48 bit

24,30,36

bit

28列N, 24,

30, 36,

48 bit

24,30,36

bit

c.第24 ~ 41列當產品不支援Deep Color請依照下列方式寫。

24列

Y/N N 25列Y/N N

26列N, 24 bit, 30 bit, 36 bit, and/or 48 bit

27列N, 24,

30, 36,

48 bit

24 bit

28列

N, 24,

30, 36,

48 bit

24 bit Source_Above_165Does the product support any video format/color

mode with a TMDS clock frequency above

165MHz?

Source_Deep_Color

Source_Video_Formats

640x480p/60Hz 4:3

720x480p/60Hz 4:3

Source_Above_165Does the product support any video format/color

mode with a TMDS clock frequency above

165MHz?

CEA Video ID Code (VIC) 1

2

Does the product support any Deep Color modes?

Which HDMI video formats are supported by the

product and at which color depths?(Select

supported items below.)

CEA Video ID Code (VIC) 1 640x480p/60Hz 4:3

2 720x480p/60Hz 4:3

Source_Deep_Color Does the product support any Deep Color modes?

Source_Video_Formats Which HDMI video formats are supported by the

product and at which color depths?(Select

supported items below.)

Source_HDMI_YCbCr Will the product transmit an HDMI video signal

using YCbCr (4:4:4 or 4:2:2) pixel encoding under

some conditions (user selection, EDID indication

etc.)?

Rptr-Mini-Sink 工作表:

a.第13 ~ 14列，Impedance 測試依據ITE chip 的特性請依照下列方式寫。ITE chip 內部特性:

Other chip 內部特性:

根據CDF 的敘述裡提到 “Does the product require that power is applied when termination impedance is measured?”，因此如果要量到IC 裡的termination impedance 的話必需power on 的模式下(在MOS 是導通的情況)，所以Sink_Diff_PowerOn 要填成 [ Y ]。

之後再去參照CTS ID 8-8裡的敘述如下:

“If CDF field Sink_Diff_PowerOn is Y: Measure the impedance value along the tested signal path, from the Sink DUT HDMI input connector to the input pins of the HDMI receiver, Zdiff_through. This is indicated in CDF field Sink_Term_Distance.”，從這裡可以知道如果

如果IC 裡的termination impedance 必需power on 的模式下才能量到的話(Sink_Diff_PowerOn is Y)，CTS 只要求當DUT 在Power off 模式下用TDR 去量從HDMI connector 到RX pin 腳(也就是到開路的地方)，這就是ZDIFF_THROUGH 的量測，同時這也是Sink_Term_Distance ，

也就是HDMI Connector 到HDMI IC pin 腳的距離(單位是nsec)。請特別注意

Impedance

測試都是DUT 在Power off 下做測試。14列Y/N

Y 15列

number>

IN1_D0:970p s

D1:920p s

D2:900p s

CK:1040ps IN2_D0:640p s

D1:600p s

Sink_Diff_PowerOn

Does the product require that power is applied when termination impedance is measured?

Sink_Term_Distance

If Sink_Diff_PowerOn is 'Y' then: For an impedance measurement, what is the length that can be correctly measured with power off? The

length is defined as the number of nsecs it takes for

a pulse to travel from the input connector, begin to reflect from the termination impedance, and travel back to the input connector.

b.第18 ~ 21列和第24列和第66 ~ 67列當產品有支援Deep Color請依照下列方式寫。

有支援Deep Color就必須是30 bit和36 bit都一定要，不可以只有支援30 bit。

For details, refer to following HDMI CTS 1.4b Test ID:8-3章節的第217頁的敘述如下:

If byte 6, bits 4 or 6 (DC_48bit or DC_30bit) equals 1 and bits 5 (DC_36bit) equals 0 then FAIL, "DC_30bit or DC_48bit supported without default DC_36bit supported."

18列Y/N Y 19列

Y/N Y 20列

Y/N Y 21列

Y/N N 24列

Y/N Y 66列

222.75

67列

1920x10

80

60Hz,

36-bit Sink_Deep_Color Does the product support Deep Color?

Sink_DC_30bit Does the product support Deep Color at 30 bits per

pixel?

Sink_Above_165Does the product support any video format and

color mode combination with a TMDS clock

frequency above 165MHz?

Sink_Max_TMDS_Clock What is the maximum TMDS clock frequency

supported by the product?

Sink_DC_36bit Does the product support Deep Color at 36 bits per

pixel?

Sink_DC_48bit Does the product support Deep Color at 48 bits per

pixel?

Any value, e.g.

74.25, 148.5,

222.75, etc.

If max frequency is other than 27 and 74.25MHz,

what video format and color depth are supported at

this max frequency?

e.g. 1600x1200

60Hz, 24-bit

c.第18 ~ 21列和第24列和第66 ~ 67列當產品不支援Deep Color 請依照下列方式寫。18列Y/N

N 19列

Y/N N

20列

Y/N N

21列

Y/N N

24列

Y/N

N

66列

148.5

67列

1920x108060Hz,24-bit

d.第31 ~ 45列只能選取這些format ，其它額外支援的format 無法寫入登記，所以如果有額外支援的format 話就必須另外寫入在CDF 的Information 工作表的第12 ~ 15列的【Notes/Remarks (optional):】

，這樣做EDID 測試的時候才會有所依據，才可以判定EDID SVD 和CDF form format 是否match 。例如: 1920x1080p@23.97/24Hz ; 1920x1080p@25Hz ; 1920x1080p@29.97/30Hz format.Audio 的部份除了“Basic Audio”之外，有額外支援其它的音頻格式也是採用這種方式登記。For CEA-861-E references to Sources, “Basic Audio” is defined as two channel L-PCM audio at sample rates of 32kHz, 44.1kHz, or 48kHz, with a sample size of at least 16 https://www.360docs.net/doc/d612827737.html,rmation 工作表:

12列

13列14列15列

e.第74 ~ 89列請填寫Sink input port 的名稱，也就是DUT 外殼上的名稱 or OS MENU 上的名稱。

Does the product support Deep Color?

Sink_DC_30bit

Does the product support Deep Color at 30 bits per pixel?

Any value, e.g.74.25, 148.5,222.75, etc.

If max frequency is other than 27 and 74.25MHz,what video format and color depth are supported at this max frequency?

e.g. 1600x120060Hz, 24-bit Sink_Above_165

Does the product support any video format and color mode combination with a TMDS clock frequency above 165MHz?

Sink_Max_TMDS_Clock

What is the maximum TMDS clock frequency supported by the product?

Sink_DC_36bit Does the product support Deep Color at 36 bits per pixel?

Sink_DC_48bit

Does the product support Deep Color at 48 bits per pixel?

Sink_Deep_Color Notes/Remarks (optional):

Additional Formats: 1920x1080p@23.97/24Hz ;1920x1080p@25Hz ; 1920x1080p@29.97/30Hz Additional Audio LPCM: Max. Channel = 8 ;Support Sampling Frequency :

32kHz,44.1kHz,48kHz,88.2kHz,96kHz ; Support Sample Length : 16-bit,20-bit,24-bit,