中英文文献翻译—动力传动技术难点分析

中英文文献翻译—动力传动技术难点分析
中英文文献翻译—动力传动技术难点分析

附录A

Power transmission technology difficulty analysis

1 And power system working characteristics

Electric vehicle has the advantages mainly in the following aspects:

(1)Compared with the same kind of car engine emission reduction.

(2) The motor as auxiliary power, to make the engine can play in good conditions, the efficiency of work and through the recycling braking energy, improve the vehicle's fuel economy.

(3) By decrease engine load reduces the noise.

(4) Transformed at present only gas stations, does not need to invest in new fuel loading.

2, Planet row the characteristic of structure series

(1) The engine is always in the best condition driving generators, so high efficiency, energy saving effect, have certain emissions, reduce pollution and low;

(2) Installed the engine-generator, flowing energy feed to the traction motor, compared with the electric car trip mileage improved significantly;

(3) Control system function, structure is simple, especially the operation control only generator according to the storage battery charging and discharging state decided to power or stopped.

3. Selection strategy

3.1 A motor vehicles in China for the development of has just started, to speed up the development of the hybrid products in China, the research and use for reference foreign results is very necessary. Power system selection in hybrid developing in a position of importance. Because of the different control strategy is based on a hybrid drive system for making and optimization. Can say power system structure types of the option to decide the hybrid of research and development, the relationship between key development progress and product the level, is the most important of HEV development and the key step. So the development must be in deep research of careful analysis and weigh the advantages and disadvantages, and on the basis of the structure of the power system type make discreet choice. In the development of comprehensive coordination performance should be advanced,

technical complexity and costs and maintenance cost, according to the relationship between the use of cars conditions and their technical conditions, choose to meet the performance of both must be advanced, and not beyond the current technology conditions, and the price and maintenance costs for market acceptable to the power system type. Therefore, it is necessary to consider the following factors: (1) Motor drive power system based on particular condition commonly carry on the design. This is because most of the power system is more sensitive to working conditions, different operating conditions of the performance difference is very big, only in specific conditions to be fully low oil consumption, low emission advantages. (2) Different types of hybrid differences between performance is very clear, in the selection of the power system must be caused by the difference between performance to structure sufficient attention. If demand is high for acceleration performance, it is necessary to choose equipped with the structure of peak power regulator type; If the economy too hard, tandem, we cannot be the right choice. (3) The technical conditions, in addition to developing the conditions and power outside, still include industrial base. Stressed because of some common industrial base of power system in China, the components of the product level can not meet the requirements or still cannot production. In the actual product development will always have a certain schedule, if the technology conditions cannot be, it will be difficult to guarantee for achieving the development plan. Necessary to explore for his technical conditions especially industrial base of hybrid structure types, advocate structure innovation. (4)Open power system is to point to the need to further develop the space. Product performance is a gradually perfect process, the same development work might not one pace reachs the designated position, also need to have been the perfect. In the specific development work should be followed from the simple to the complex, from easy to difficult train of thought, to choose the technical conditions of the low required appropriate simple structure, development.(5) The structure of the power system of hybrid cost impact, this is because different types of power system for the kinds of components, the quantity and the performance requirements the difference is very big. And the kinds of components, the quantity and the performance index is the effect of the main factors of hybrid costs. Selection should also consider the use and maintenance costs, the more complex structure, the higher failure rate, use and maintenance cost is higher. Price and maintenance expenses directly related to the industrialization of HEV, if can't industrialization, can provide the necessary for further development of the capital, it will be difficult to promote and raising

the level of technology to improve the performance of. In fact, the fine performance but because the price too high to commercialization, and even forced to give up the development of HEV examples not rarely seen, we should not repeat it.

In view of our country at present the city's air pollution problems and oil shortages are very serious, and the technological basis of weak, preference hybrid system should be relatively simple structure, applicable to general city mode of the structure and the working condition between the cities series of parallel structure, and to buses and cars as a key development targets.

It a: a hybrid car engine starting on and off, make frequent driving system and accessories (such as air conditioning and power steering, etc) of power management is complicated, so need advanced detection and control system; The existing to heat engine primarily hybrid unit in the fuel into YouYongGong at the same time, needs to improve the efficiency of conversion, and also to meet strict emission standard.

Second: energy storage device (battery) to have higher than power, to meet the car accelerated and climbing to the need of high power when; At the same time, energy storage device must use heat control management, want to have higher than energy, long service life and low production cost.

Third: must reduce the size of the power electronics device, reduce the quality and reduce production cost.

Its 4: need to build a more advanced driving system mathematical model (including static and dynamic), is this the computer simulation and analysis of the foundation.

Its 5: make perfect hybrid cars of relevant standards and regulations, for hybrid cars, which laid the foundation of the market.

3.2 Electric drive system and car accessories

To make a hybrid car of the power, economy, comfort, safety and convenience to consumers can acceptable level, there must be efficient and economic power drive system and car accessories. However, the system of some components in the traditional car without a corresponding parts, so need to development design. In development at the same time, want to consider the system synthesis performance, costs and maintenance performance.

1) Motor in a hybrid car, motor is the role of the generator or energy storage device provide electrical energy into mechanical energy is used to drive the wheels. And the traditional automobile different is, motor speed can provide in full, and engine torque must be to wait

until "mad" can only output loaded with torque. This makes hybrid cars have excellent starting and accelerating performance. In addition, used for a hybrid car motor must have good controllability and fault tolerance, and low noise, high efficiency, and is not sensitive to the voltage fluctuations and performance.

Used for a hybrid car motor type has ac induction motor, permanent magnet motor and switched reluctance motor. At present the typical is ac induction motor, but this kind of motor are born is difficult to solve the contradiction between power and efficiency. Therefore, we need to study out can be used for hybrid cars, have higher efficiency and power density of permanent magnet motor, switched reluctance motor, and other advanced motor, to replace current use of ac induction motor. At the same time for the motor control method and the cooling system research also should go further.

2)Regenerative braking, this kind of hybrid cars can recycle braking energy consumption part of. When a hybrid car brake, motor, generator, using cars into the kinetic energy to produce electricity, and can be stored in battery in it for later. In hybrid cars, there are many form of energy can be used as the regenerative braking energy storage device, such as high-speed flywheel, super capacitor, elastic device and all kinds of thermal system, etc. Of course, the traditional friction braking is necessary, so you need to consider how to two sets of braking equipment reasonable use, reasonable, and the problems of control. Braking, the electronic control system of the regenerative braking and friction braking system at the same time, the braking performance will be improved.

3) Car accessories, any style of car to get consumers and all must consider the car comfort. The automobile air-conditioning accessories can improve the car of comfort, but energy use is very big, if not reduce the load, they will be for the automobile fuel economy have a huge impact. So, whether in the car at the same time, improve the comfort to improve fuel economy is at present to innovation of research. Traditional bus attachments system on the engine design, not for hybrid cars drive system. For example, the traditional automobile accessories (such as air condition, power steering, etc) by the engine drive, but because the hybrid car engines are not always work, need to design and production can the independent powered accessories. Be like again, because a hybrid car engine frequently starting and close, make its drive system and accessories for the power management complicated, need to have a more advanced monitoring and control system.

3.3 A hybrid car simulation technology

In the research and development of a hybrid car components and choose the best structure, need to design and maker can quickly reduce research scope, find technical breakthrough. Technical scheme selection stages, in the system the choice, can rely on efficient modeling tools computer, through the alternate use of candidate subsystems simulation, so as to find the best solutions. Computer models for each candidate subsystem provides a detailed specifications and design parameters, and convenient to the designer's work, but also to make model for designing and manufacturing engineering target and plan.

Now, the responsible for electric cars and hybrid vehicles standards and regulations is the organization of the international electrotechnical commission (IEC), the international organization for standardization (ISO), the American auto engineers association (SAE), etc. For our country, because of hybrid cars are already in the experimental stage, and all the standards work should begin corresponding. For future will appear DuoZhong driving car coexistence, car standards will also need to consider the traditional automobile, hybrid cars and pure electric vehicle the comparability between universality and.

中英文文献翻译

毕业设计(论文)外文参考文献及译文 英文题目Component-based Safety Computer of Railway Signal Interlocking System 中文题目模块化安全铁路信号计算机联锁系统 学院自动化与电气工程学院 专业自动控制 姓名葛彦宁 学号 200808746 指导教师贺清 2012年5月30日

Component-based Safety Computer of Railway Signal Interlocking System 1 Introduction Signal Interlocking System is the critical equipment which can guarantee traffic safety and enhance operational efficiency in railway transportation. For a long time, the core control computer adopts in interlocking system is the special customized high-grade safety computer, for example, the SIMIS of Siemens, the EI32 of Nippon Signal, and so on. Along with the rapid development of electronic technology, the customized safety computer is facing severe challenges, for instance, the high development costs, poor usability, weak expansibility and slow technology update. To overcome the flaws of the high-grade special customized computer, the U.S. Department of Defense has put forward the concept:we should adopt commercial standards to replace military norms and standards for meeting consumers’demand [1]. In the meantime, there are several explorations and practices about adopting open system architecture in avionics. The United Stated and Europe have do much research about utilizing cost-effective fault-tolerant computer to replace the dedicated computer in aerospace and other safety-critical fields. In recent years, it is gradually becoming a new trend that the utilization of standardized components in aerospace, industry, transportation and other safety-critical fields. 2 Railways signal interlocking system 2.1 Functions of signal interlocking system The basic function of signal interlocking system is to protect train safety by controlling signal equipments, such as switch points, signals and track units in a station, and it handles routes via a certain interlocking regulation. Since the birth of the railway transportation, signal interlocking system has gone through manual signal, mechanical signal, relay-based interlocking, and the modern computer-based Interlocking System. 2.2 Architecture of signal interlocking system Generally, the Interlocking System has a hierarchical structure. According to the function of equipments, the system can be divided to the function of equipments; the system

建筑类外文文献及中文翻译

forced concrete structure reinforced with an overviewRein Since the reform and opening up, with the national economy's rapid and sustained development of a reinforced concrete structure built, reinforced with the development of technology has been great. Therefore, to promote the use of advanced technology reinforced connecting to improve project quality and speed up the pace of construction, improve labor productivity, reduce costs, and is of great significance. Reinforced steel bars connecting technologies can be divided into two broad categories linking welding machinery and steel. There are six types of welding steel welding methods, and some apply to the prefabricated plant, and some apply to the construction site, some of both apply. There are three types of machinery commonly used reinforcement linking method primarily applicable to the construction site. Ways has its own characteristics and different application, and in the continuous development and improvement. In actual production, should be based on specific conditions of work, working environment and technical requirements, the choice of suitable methods to achieve the best overall efficiency. 1、steel mechanical link 1.1 radial squeeze link Will be a steel sleeve in two sets to the highly-reinforced Department with superhigh pressure hydraulic equipment (squeeze tongs) along steel sleeve radial squeeze steel casing, in squeezing out tongs squeeze pressure role of a steel sleeve plasticity deformation closely integrated with reinforced through reinforced steel sleeve and Wang Liang's Position will be two solid steel bars linked Characteristic: Connect intensity to be high, performance reliable, can bear high stress draw and pigeonhole the load and tired load repeatedly.

企业创新战略外文翻译文献

企业创新战略外文翻译文献(文档含中英文对照即英文原文和中文翻译) 翻译之一: Choosing an innovation strategy: theory and practice Author:Joseph T. Gilbert Nationality:America Derivation:Business Horizons, Nov-Dec, 1994 Innovations come as both inventions and adoptions. They come in many types and vary greatly in complexity and scope. Companies attempting to

make a profit cannot continue for long periods without innovating. If they try, their customers will leave them for firms with more up-to-date products or services. It is an observed fact that different companies take different approaches to the use of innovation in attempting to improve their performance. Both academic and practitioner publications in recent years have contained a great deal of writing about innovation, the subjects of which have ranged from comparisons of national patterns of innovation to studies of individual innovations. However, little has been published regarding one issue of both theoretical and practical importance: the innovation policy or strategy of individual firms. Business strategy as a field of study is concerned with how a company competes in its chosen business. It deals with the analysis of a firm's strengths and weaknesses and the opportunities and threats presented by the firm's environment. Strategy looks toward consistent execution of broad plans to achieve certain levels of performance. Innovation strategy determines to what degree and in what way a firm attempts to use innovation to execute its business strategy and improve its performance. To choose an innovation strategy, managers might logically start by thinking about various kinds of innovations and their requirements. We shall discuss three major features of innovation, and analyze each in terms of distinct opposites, even though innovations found in the real world more often appear at various points between these opposites. Innovation is sometimes used in a limited sense to refer only to inventions (products, services, or administrative procedures that no other firm has introduced). More often, however, it applies in a more general sense that includes both invention as described above and imitation (adoption by a firm of a product, service, or administrative procedure that is not an invention but is new to that firm). We use the term in this second sense. Innovations can be characterized in a variety of ways. In the following

文献翻译英文原文

https://www.360docs.net/doc/e716764046.html,/finance/company/consumer.html Consumer finance company The consumer finance division of the SG group of France has become highly active within India. They plan to offer finance for vehicles and two-wheelers to consumers, aiming to provide close to Rs. 400 billion in India in the next few years of its operations. The SG group is also dealing in stock broking, asset management, investment banking, private banking, information technology and business processing. SG group has ventured into the rapidly growing consumer credit market in India, and have plans to construct a headquarters at Kolkata. The AIG Group has been approved by the RBI to set up a non-banking finance company (NBFC). AIG seeks to introduce its consumer finance and asset management businesses in India. AIG Capital India plans to emphasize credit cards, mortgage financing, consumer durable financing and personal loans. Leading Indian and international concerns like the HSBC, Deutsche Bank, Goldman Sachs, Barclays and HDFC Bank are also waiting to be approved by the Reserve Bank of India to initiate similar operations. AIG is presently involved in insurance and financial services in more than one hundred countries. The affiliates of the AIG Group also provide retirement and asset management services all over the world. Many international companies have been looking at NBFC business because of the growing consumer finance market. Unlike foreign banks, there are no strictures on branch openings for the NBFCs. GE Consumer Finance is a section of General Electric. It is responsible for looking after the retail finance operations. GE Consumer Finance also governs the GE Capital Asia. Outside the United States, GE Consumer Finance performs its operations under the GE Money brand. GE Consumer Finance currently offers financial services in more than fifty countries. The company deals in credit cards, personal finance, mortgages and automobile solutions. It has a client base of more than 118 million customers throughout the world

英文文献翻译

中等分辨率制备分离的 快速色谱技术 W. Clark Still,* Michael K a h n , and Abhijit Mitra Departm(7nt o/ Chemistry, Columbia Uniuersity,1Veu York, Neu; York 10027 ReceiLied January 26, 1978 我们希望找到一种简单的吸附色谱技术用于有机化合物的常规净化。这种技术是适于传统的有机物大规模制备分离,该技术需使用长柱色谱法。尽管这种技术得到的效果非常好,但是其需要消耗大量的时间,并且由于频带拖尾经常出现低复原率。当分离的样本剂量大于1或者2g时,这些问题显得更加突出。近年来,几种制备系统已经进行了改进,能将分离时间减少到1-3h,并允许各成分的分辨率ΔR f≥(使用薄层色谱分析进行分析)。在这些方法中,在我们的实验室中,媒介压力色谱法1和短柱色谱法2是最成功的。最近,我们发现一种可以将分离速度大幅度提升的技术,可用于反应产物的常规提纯,我们将这种技术称为急骤色谱法。虽然这种技术的分辨率只是中等(ΔR f≥),而且构建这个系统花费非常低,并且能在10-15min内分离重量在的样本。4 急骤色谱法是以空气压力驱动的混合介质压力以及短柱色谱法为基础,专门针对快速分离,介质压力以及短柱色谱已经进行了优化。优化实验是在一组标准条件5下进行的,优化实验使用苯甲醇作为样本,放在一个20mm*5in.的硅胶柱60内,使用Tracor 970紫外检测器监测圆柱的输出。分辨率通过持续时间(r)和峰宽(w,w/2)的比率进行测定的(Figure 1),结果如图2-4所示,图2-4分别放映分辨率随着硅胶颗粒大小、洗脱液流速和样本大小的变化。

统计学中英文对照外文翻译文献

中英文对照翻译 (文档含英文原文和中文翻译) Policies for Development of Iron and Steel Industry The iron and steel industry is an important basic industry of the national economy, a supporting industry for realizing the industrialization and an intensive industry in technologies, capital, resources and energy, and its development requires a comprehensive balancing of all kinds of external conditions. China is a big developing country with a comparatively big demand of iron and steel in the economic development for a long time to go. China's production capacity of iron and steel has ranked the first place in the world for many years. However, there is a large gap in terms of the technological level and material consumption of the iron and steel industry compared with the international advanced level, so the focus of development for the future shall be put on technical upgrading and structural adjustment. In order to enhance the whole technical level of the iron and steel industry, promote the structural adjustment, improve the industrial layout, develop a recycling economy, lower the consumption of materials and energy, pay attention to the environmental protection, raise the comprehensive competitive capacity of enterprises, realize the industrial upgrading, and develop the iron and steel industry into an industry with

土木工程外文文献翻译

专业资料 学院: 专业:土木工程 姓名: 学号: 外文出处:Structural Systems to resist (用外文写) Lateral loads 附件:1.外文资料翻译译文;2.外文原文。

附件1:外文资料翻译译文 抗侧向荷载的结构体系 常用的结构体系 若已测出荷载量达数千万磅重,那么在高层建筑设计中就没有多少可以进行极其复杂的构思余地了。确实,较好的高层建筑普遍具有构思简单、表现明晰的特点。 这并不是说没有进行宏观构思的余地。实际上,正是因为有了这种宏观的构思,新奇的高层建筑体系才得以发展,可能更重要的是:几年以前才出现的一些新概念在今天的技术中已经变得平常了。 如果忽略一些与建筑材料密切相关的概念不谈,高层建筑里最为常用的结构体系便可分为如下几类: 1.抗弯矩框架。 2.支撑框架,包括偏心支撑框架。 3.剪力墙,包括钢板剪力墙。 4.筒中框架。 5.筒中筒结构。 6.核心交互结构。 7. 框格体系或束筒体系。 特别是由于最近趋向于更复杂的建筑形式,同时也需要增加刚度以抵抗几力和地震力,大多数高层建筑都具有由框架、支撑构架、剪力墙和相关体系相结合而构成的体系。而且,就较高的建筑物而言,大多数都是由交互式构件组成三维陈列。 将这些构件结合起来的方法正是高层建筑设计方法的本质。其结合方式需要在考虑环境、功能和费用后再发展,以便提供促使建筑发展达到新高度的有效结构。这并

不是说富于想象力的结构设计就能够创造出伟大建筑。正相反,有许多例优美的建筑仅得到结构工程师适当的支持就被创造出来了,然而,如果没有天赋甚厚的建筑师的创造力的指导,那么,得以发展的就只能是好的结构,并非是伟大的建筑。无论如何,要想创造出高层建筑真正非凡的设计,两者都需要最好的。 虽然在文献中通常可以见到有关这七种体系的全面性讨论,但是在这里还值得进一步讨论。设计方法的本质贯穿于整个讨论。设计方法的本质贯穿于整个讨论中。 抗弯矩框架 抗弯矩框架也许是低,中高度的建筑中常用的体系,它具有线性水平构件和垂直构件在接头处基本刚接之特点。这种框架用作独立的体系,或者和其他体系结合起来使用,以便提供所需要水平荷载抵抗力。对于较高的高层建筑,可能会发现该本系不宜作为独立体系,这是因为在侧向力的作用下难以调动足够的刚度。 我们可以利用STRESS,STRUDL 或者其他大量合适的计算机程序进行结构分析。所谓的门架法分析或悬臂法分析在当今的技术中无一席之地,由于柱梁节点固有柔性,并且由于初步设计应该力求突出体系的弱点,所以在初析中使用框架的中心距尺寸设计是司空惯的。当然,在设计的后期阶段,实际地评价结点的变形很有必要。 支撑框架 支撑框架实际上刚度比抗弯矩框架强,在高层建筑中也得到更广泛的应用。这种体系以其结点处铰接或则接的线性水平构件、垂直构件和斜撑构件而具特色,它通常与其他体系共同用于较高的建筑,并且作为一种独立的体系用在低、中高度的建筑中。

营销策略外文翻译文献

营销策略外文翻译文献 (文档含中英文对照即英文原文和中文翻译)

译文: 营销策略 内容提要:为了组织的销售能是成功的,它需要根据一个营销策略计划来帮助保证其努力的目标和宗旨与市场的需要想吻合。营销策略审查市场以确定潜在顾客的需要,竞争者的战略和市场地位,并且尝试制定出一套能使组织在市场上获取或维护竞争优势的相关战略。有一些因素会对营销策略计划的发展造成冲击性的影响,它包括内部因素例如组织的财产、技能和组织文化,外在因素例如各种各样的市场驱动者、市场或产业运作方式、战略窗口和竞争的本质。一个优选的营销策略计划也需具备一套意外情况防备策略以应对市场治理及组织生产能力的不确定性。 关键词:竞争优势竞争策略市场地位市场份额营销销售计划组织文化营销策略 营销策略简述 无论组织的产品或服务多么好,除非它们的价值能被传达给潜在的顾客,否则组织依然无法实现它的使命。这种传达和交流是组织内市场营销功能的职责。根据美国市场协会,营销是“一个组织效能和一套创造过程、交流和传达产品价值给顾客、处理与顾客关系的有益于组织和它的利益共享者的方式”。营销作用包括相辅相成的两方面。营销策略在市场上审查市场来确定潜在顾客和竞争者本质的需要,并且试图开发

出在市场上将使组织获取或维护竞争优势的战略。操作的营销被建立在营销策略作用和贯彻各种各样的计划和策略(包括适当的混合营销的发展)吸引顾客和促进顾客忠实的基础之上的。 产品和服务营销的方法 有很多的方式能用来销售你的产品或服务包括做广告,直接响应、推销活动和宣传。然而,除非你能了解顾客、市场和产业的需要并且竞争的优势和劣势,否则这些方法是不太可能成功的。营销策略帮助一个组织尖化它的焦点和在市场顺利地竞争。营销策略与二个组分有关:目标市场和用最佳的方式传达你的产品价值或服务到那个市场。一个可实行的销售方针的发展取决于几个关键维度。首先,与组织之内的所有全球性战略一样,一个成功的销售方针需要由在组织之内的最高管理层签名。销售方针本质上也具有政治性的色彩:在组织之内的强有力的单位在最佳的销售方针也许不同意,并且协议也许需要谈判达成。销售方针也许受组织文化的也影响,并且那得假定这发生。例如,如果组织总是销售它的装饰物给商业主管,它也许就看不到组织之内的低层人员甚至是成人或少年的个人消费潜力。 实施战略销售计划发展的因素 存在一些能冲击战略销售计划发展的因素,这些因素首先包括组织已经拥有或它可能欣然获取的财产和技能。例如,如果组织拥有一个重大编程的部门,就为它能做和销售应用软件提供了可行性的条件。然而,如果这些人员已经在其他工作介入并且不能自由研究一个新的软件项目,并且组织没能力聘用另外的程序员,起始一条新的软件线是不妥当

英文文献及中文翻译

毕业设计说明书 英文文献及中文翻译 学院:专 2011年6月 电子与计算机科学技术软件工程

https://www.360docs.net/doc/e716764046.html, Overview https://www.360docs.net/doc/e716764046.html, is a unified Web development model that includes the services necessary for you to build enterprise-class Web applications with a minimum of https://www.360docs.net/doc/e716764046.html, is part of https://www.360docs.net/doc/e716764046.html, Framework,and when coding https://www.360docs.net/doc/e716764046.html, applications you have access to classes in https://www.360docs.net/doc/e716764046.html, Framework.You can code your applications in any language compatible with the common language runtime(CLR), including Microsoft Visual Basic and C#.These languages enable you to develop https://www.360docs.net/doc/e716764046.html, applications that benefit from the common language runtime,type safety, inheritance,and so on. If you want to try https://www.360docs.net/doc/e716764046.html,,you can install Visual Web Developer Express using the Microsoft Web Platform Installer,which is a free tool that makes it simple to download,install,and service components of the Microsoft Web Platform.These components include Visual Web Developer Express,Internet Information Services (IIS),SQL Server Express,and https://www.360docs.net/doc/e716764046.html, Framework.All of these are tools that you use to create https://www.360docs.net/doc/e716764046.html, Web applications.You can also use the Microsoft Web Platform Installer to install open-source https://www.360docs.net/doc/e716764046.html, and PHP Web applications. Visual Web Developer Visual Web Developer is a full-featured development environment for creating https://www.360docs.net/doc/e716764046.html, Web applications.Visual Web Developer provides an ideal environment in which to build Web sites and then publish them to a hosting https://www.360docs.net/doc/e716764046.html,ing the development tools in Visual Web Developer,you can develop https://www.360docs.net/doc/e716764046.html, Web pages on your own computer.Visual Web Developer includes a local Web server that provides all the features you need to test and debug https://www.360docs.net/doc/e716764046.html, Web pages,without requiring Internet Information Services(IIS)to be installed. Visual Web Developer provides an ideal environment in which to build Web sites and then publish them to a hosting https://www.360docs.net/doc/e716764046.html,ing the development tools in Visual Web Developer,you can develop https://www.360docs.net/doc/e716764046.html, Web pages on your own computer.

外文翻译中英对照版

VOLUME 30 ISSUE 2 October 2008 Journal of Achievements in Materials and Manufacturing Engineering Copyright by International OCSCO World Press. All rights reserved.2008 151 Research paper 2008年十月期2卷30 材料与制造工程成果期刊 版权所有:国际OCSCO 世界出版社。一切权利保有。2008 ??151研究论文 1. Introduction Friction stir welding (FSW) is a new solid-state welding method developed by The Welding Institute (TWI) in 1991 [1]. The weld is formed by the excessive deformation of the material at temperatures below its melting point, thus the method is a solid state joining technique. There is no melting of the material, so FSW has several advantages over the commonly used fusion welding techniques [2-10]. 1.导言摩擦搅拌焊接(FSW)是焊接学?会于1991年研发的一种新型固态焊接方法。这种焊接?是由材料在低于其熔点的温度上过量变形形成,因此此技术是一种固态连接技术。材料不熔化,所以FSW 相比常用的熔化焊接技术有若干优势。例如,在焊接区无多孔性或破裂,工件(尤其薄板上)没有严重扭曲,并且在连接过程中不需要填料、保护气及昂贵的焊接准备there is no significant distortion of the workpieces (particularly in thin plates), and there is no need for filler materials, shielding gases and costly weld preparation during this joining process. FSW被认为是对若干材料例如铝合金、镁合金、黄铜、钛合金及钢最显著且最有潜在用途的焊接技术FSW is considered to be the most remarkable and potentially useful welding technique for several materials, such as Al-alloys, Mg-alloys, brasses, Ti-alloys, and steels [1-16]. 然而,在FSW过程中,用不合适的焊接参数能引起连接处失效,并且使FSW连接处的力学性能恶化。However, during FSW process using inappropriate welding parameters can cause defects in the joint and deteriorate the mechanical properties of the FSW joints [2, 3]. 此技术起初就主要是为低熔点材料如铝合金、镁合金及铜合金而广泛研究的。The technique has initially been widely investigated for mostly low melting materials, such as Al, Mg and Cu alloys. 此技术已被证明是很有用的,尤其在连接用于航空航天用途的如高合金2XXX及7XXX系列铝合金等难熔高强度的铝合金。It has proven to be very useful, particularly in the joining of the difficult-to-fusion join high strength Al-alloys used in aerospace applications, such as highly alloyed 2XXX and 7XXX series aluminium alloys. 做出Al-5086 H32型板摩擦搅拌对焊的高强度、抗疲劳及断裂的力学性能?。The difficulty of making high-strength, fatigue and fracture resistant Mechanical properties of friction stir butt-welded Al-5086 H32 plate G. .am a,*, S. Gü.lüer b, A. .akan c, H.T. Serinda. a a Mustafa Kemal University, Faculty of Engineering and Architecture, 31040 Antakya, Turkey a 土耳其安塔卡亚31040,Mustafa Kemal大学建筑工程系 b General Directorate of Highways of Turkey, Ankara, Turkey b 土耳其安卡拉土耳其高速公路总理事会? c Abant Izzet Baysal University, Faculty of Engineering an d Architecture, 14280 Bolu, Turkey c 土耳其Bolu 14280 Abant Izzet Baysal 大学建筑工程系 * Corresponding author: E-mail address: gurelcam@https://www.360docs.net/doc/e716764046.html, *相关作者电子邮箱地址:gurelcam@https://www.360docs.net/doc/e716764046.html, Received 30.06.2008; published in revised form 01.10.2008

土木工程专业外文文献及翻译

( 二 〇 一 二 年 六 月 外文文献及翻译 题 目: About Buiding on the Structure Design 学生姓名: 学 院:土木工程学院 系 别:建筑工程系 专 业:土木工程(建筑工程方向) 班 级:土木08-4班 指导教师:

英文原文: Building construction concrete crack of prevention and processing Abstract The crack problem of concrete is a widespread existence but again difficult in solve of engineering actual problem, this text carried on a study analysis to a little bit familiar crack problem in the concrete engineering, and aim at concrete the circumstance put forward some prevention, processing measure. Keyword:Concrete crack prevention processing Foreword Concrete's ising 1 kind is anticipate by the freestone bone, cement, water and other mixture but formation of the in addition material of quality brittleness not and all material.Because the concrete construction transform with oneself, control etc. a series problem, harden model of in the concrete existence numerous tiny hole, spirit cave and tiny crack, is exactly because these beginning start blemish of existence just make the concrete present one some not and all the characteristic of quality.The tiny crack is a kind of harmless crack and accept concrete heavy, defend Shen and a little bit other use function not a creation to endanger.But after the concrete be subjected to lotus carry, difference in temperature etc. function, tiny crack would continuously of expand with connect, end formation we can see without the

相关文档
最新文档