施乐复印机DCC3000维修手册：dcc3000_e_ver1.2_chap05
施乐v330复印机维修手册
施乐v330复印机维修手册！诊断（C/E）模式如何进入诊断（C/E）模式按住数字板上“0”按扭的同时接通电源。
·控制面板上所有发光二级管（LED）发亮。
当你按下数字板或停止/清除钮时。
“E1卡纸”、“E3卡纸”和“色粉空”三个LED开始闪烁。
其余LED熄灭。
注意：配有10格分页装订器的机器。
其手动装订灯和补充装订针灯交替闪烁。
进入链码、功能码、设定值如果你进入了一个错误的链码或功能码，按停止清除钮，再重新进入一个正确的代码。
·如果进入了一个不存在的链码、功能码或设定值，显示“Er”。
如何退出诊断（C/E）模式关闭电源再接通。
诊断功能和操作程序输入检查功能：以“H”或“L”方式显示传感器或开关的输入电压。
程序：1·进入诊断模式。
2·进入待检查部件的链码，然后按后动钮。
3.进入待检查部件的功能码，然后按启动钮。
4.操作待检查的部件·电压为高时，显示“H”；电压为低时，显示“L”。
5.在检查中，按一次停止清除钮，功能码被清除。
按两次停止清除钮，链码被清除。
A/D输入检查功能：以数字值方式显示传感器输入电压。
程序：1.进入诊断模式。
2.进入待检查部件的链码，然后按启动钮。
3.进入待检查部件的功能码，然后按启动钮。
·以0-FF方式显示电压值，显示随电压值变化而变化。
4.在检查中，按一次停止清除钮，功能码被清除，按两次停止清除钮，链码被清除。
控制面板按钮检查（2-1）功能：检查控制面板上除停止清除钮以外的任何按扭。
程序：1.进入诊断模式。
2.进入链码“2”，然后按启动钮。
3.进入功能码“1”，然后按启动钮。
4.按下/松开除停止清除钮以外的任何其它按钮，显示值增加2。
5.在检查中，按一次停止清除钮，功能码被清除，按两次停止清除钮，链码被清除。
功能：同时检查原稿尺寸传感器1-4程序：1.进入诊断模式。
2.进入链码“2”，然后按启动钮。
3.进入功能码“1”，然后按启动钮。
DC-3000中文说明书
3.3 3.4 3.5 3.6
准備測量圖形 ................................................... 36 擺正工件 ....................................................... 36 座標平移 ....................................................... 37 DC-3000 操作 ................................................... 37
3.1 概念 ........................................................... 21
3.1.1 圖形元素(Feature) ...................................................... 21 3.1.2 圖形列表(Feature List) ................................................. 21 3.1.3 采樣點(Targeting Point) ................................................ 22 3.1.4 生成圖形的方法 ......................................................... 22
施乐DocuCentre_III C3300 C2200 C2201维修手册：apc3300g_sc_ver1_chap01
第一章维修要领2008/081-1ApeosPort-III/DocuCentre-III C3300/C2200/C2201维修要领Version 11 维修要领1.1 作业前的注意事项.......................................................31.2 访问时的作业流程.......................................................41.3 访问时的详细作业内容...................................................51.4 TRIM 检查列表..........................................................61.5 定期更换零件／消耗品列表...............................................62008/081-2Version 1ApeosPort-III/DocuCentre-III C3300/C2200/C2201维修要领2008/081-3ApeosPort-III/DocuCentre-III C3300/C2200/C2201维修要领1.1 作业前的注意事项Version 11.1 作业前的注意事项1.1.1 安全性为了能够在保养作业中防患事故发生于未然，必须严守作业上的警告和注意。
绝对不能执行危险的作业。
1.电源为了防止触电、烧伤、伤害等，维修作业必须在关闭电源并拔出电源插头后执行。
但在测量电压等不得已需要打开电源的情况下，执行作业时应充分注意，以防触电。
2.驱动部分链条皮带、链轮齿、齿轮等驱动部分的检查、清洁以及上油作业绝对不能在机器正在运作时进行。
3.重物拆卸、安装下列重物时，注意使腰部充分降低再进行作业。
4.安全装置防止机器事故的安全装置（保险丝、断路器、联锁开关） 及客户操作机器时的安全装置（面板、盖子等） ，都应确保其安全功能令人满意。
C3000使用说明书
本公司向最终用户保证， 该仪表供货时的硬件、 附件在材质和制造工艺上都不存在任何缺陷。 若 在仪表到货之日起的 1 年质保期内收到用户有关这类缺陷的通知，本公司将对确实有缺陷的产 品实行免费修理或更换。本公司的所有产品均承诺终身维修 。
公司遵循持续发展的原则。我们保留在预先不通知的情况下，对此手册中描述的任何产品进行 修改和改进的权利；保留在预先不通知的情况下，修订或废止本文档的权利。对改进后的产品 有相应的安装使用手册或改进说明。若本手册中的描述与仪表实物存在不符，请以实物为准。
1.1 特点................................................................................................................................................ 1 1.2 安全................................................................................................................................................ 2 1.3 警告和安全预防措施 .......................................................................................................................3 第二章 性能指标....................................................................................................................................... 4 2.1 简介................................................................................................................................................ 4 2.2 详细说明......................................................................................................................................... 4 2.3 输入信号......................................................................................................................................... 5 2.4 输出信号......................................................................................................................................... 6 2.5 其他参数......................................................................................................................................... 6 第三章 型号规格代码................................................................................................................................7 第四章 开 箱...........................................................................................................................................8
施乐DocuCentre_III C3300 C2200 C2201维修手册：apc3300g_sc_ver1_chap02
第二章故障诊断2008/082-1ApeosPort-III/DocuCentre-III C3300/C2200/C2201故障诊断Version 12故障诊断2.1 序文2.1.1 故障诊断的方法2.1.1 故障诊断的方法.......................................................232.1.2 术语说明2.1.2 术语说明.............................................................252.1.3 控制器FIP 的使用方法2.1.3 控制器FIP 的使用方法.................................................272.1.4 控制器Chain-Link No 的定义2.1.4 控制器Chain-Link No 的定义...........................................292.2 Product FIP 2.2.1 IIT,IOT FIP CHAIN 5005-121 DADF Feed Out Sensor On Jam........................................31005-122 DADF Simplex/Side 1 Pre Regi. Sensor On Jam........................32005-123 DADF Simplex/Side 1 Regi. Sensor On Jam............................33005-125 DADF Regi. Sensor Off Jam..........................................34005-131 DADF Invert Sensor On Jam （Invert 中）.............................34005-132 DADF Invert Sensor On Jam..........................................35005-134 DADF Invert Sensor Off Jam （Invert 中）............................35005-135 DADF Side 2 Pre Regi. Sensor On Jam................................36005-136 DADF Side 2 Regi. Sensor On Jam....................................36005-139 DADF Invert Sensor Off Jam.........................................37005-145 DADF Regi Sensor Off Jam （Invert）.................................37005-146 DADF Pre Regi Sensor Off Jam.......................................38005-147 DADF Pre Regi Sensor Off Jam （Invert）.............................38005-194 Mix Size Miss Match Jam............................................39005-196 Original Size Mismatch With No. Mix................................39005-197 Prohibit Combine Size Jam..........................................40005-198 Too Short Size Jam.................................................40005-199 Too Long Size Jam..................................................41005-210 DADF Download Fail.................................................41005-275 DADF RAM Test Fail.................................................43005-280 DADF EEPROM Fail...................................................44005-284 DADF APS Sensor Logic Fail.........................................44005-285 DADF Nudger Lift Up Fail...........................................45005-286 DADF Feed Out Sensor Fail..........................................45005-305 DADF Feeder Cover Interlock Open （正在运行）.......................46005-906 DADF Feed Out Sensor Static Jam....................................46005-907 DADF Pre Regi. Sensor Static Jam...................................47005-908 DADF Regi. Sensor Static Jam.......................................47005-913 DADF Invert Sensor Static Jam......................................48005-915 DADF APS Sensor 1 Static Jam.......................................48005-916 DADF APS Sensor 2 Static Jam.......................................49005-917 DADF APS Sensor 3 Static Jam.......................................49005-940 DADF No Original...................................................50005-941 Doc number of sheets is insufficient...............................50 CHAIN 10010-311 Heat Roll STS Disconnection Fail...................................51010-319 Heat Roll NC Sensor Differential Amp Fail..........................51010-333 Heat Roll Over Temperature Fail....................................52010-326 Fuser Hot Not Ready Return Time Fail...............................52010-328 Warm Up Time Fail..................................................53010-329 Fuser Fuse cut Fail................................................53010-330 Fuser Motor Fail...................................................54010-332 Heat Roll NC Sensor Differential Amp Fail..........................54010-333 Heat Roll NC Sensor Over Temperature Fail..........................55010-334 Heat Roll NC Sensor Broken Fail....................................55010-335 Heat Roll NC Sensor Range Fail.....................................56010-337 Heat Roll Paper Winding Fail.......................................56010-338 Fuser On Time Fail.................................................57010-398 Fuser Fan Fail.....................................................57010-341 Fuser Assy illegal Fail............................................58010-420 Fuser Assembly Near Life Warning...................................58010-421 Fuser Assembly Life Over Warning...................................59 CHAIN 41041-310 IM Logic Fail......................................................61041-330 MCU PWB F7 Blows...................................................61041-331 MCU PWB F8 Blows...................................................62041-340 MCU Nvm （EEPROM）Data Fail ........................................62041-341 MCU Nvm （EEPROM）Access Fail ......................................63041-342 MCU Nvm （EEPROM）Buffer Fail ......................................63041-344 MD PWB F1 Blows....................................................64041-345 MD PWB F2 Blows....................................................64041-346 MD PWB F3 Blows....................................................65041-347 Serial I/O Fail....................................................65041-348 MD PWB F4 Blows....................................................66041-349 MD PWB F6 Blows....................................................66041-350 MD PWB F7 Blows....................................................67 CHAIN 42042-320 Drum Y/M/C Motor Fail..............................................69042-323 Drum K Motor Fail..................................................69042-324 IBT Motor Fail.....................................................70042-325 Main Motor Fail. (70)2008/082-2Version 1ApeosPort-III/DocuCentre-III C3300/C2200/C2201故障诊断042-329 HV Fan Fail .......................................................71042-334 IBT Fan Fail ......................................................72042-336 Process 2 Fan Fail ................................................72042-337 NOHAD Logic Fail ..................................................73042-343 Rear Bottom Fan Fail ..............................................73042-400 Deodorant Filter Life End .........................................74042-604 NOHAD Temperature Sensor Fail .....................................74042-605 Drive Fan Fail ....................................................75 CHAIN 45045-310 Image Ready NG ....................................................77045-311 Controller Communication Fail .....................................77045-312 Drive Logic Fail ..................................................78045-313 ENG_LOGIC_FAIL ....................................................78045-321 MK_Panel_NG .......................................................79045-322 MK_Pitch_NG .......................................................79045-331 MK_MKIF_MSG_Reject ................................................80045-332 MK_MMIF_MSG_Reject ................................................80045-340 ENG_Emergency_Over_Wait ...........................................81045-341 ENG_Emergency_No_Timer ............................................81045-342 ENG_Emergency_Enforced_Stop .......................................82045-350 MK_Emergency_Over_Wait ............................................82045-351 MK_Emergency_No_Timer .............................................83045-352 MK_Emergency_Enforced_Stop ........................................83 CHAIN 47047-211 Exit 1 OCT Home Fail ..............................................85047-212 Exit 2 OCT Home Fail ..............................................85047-216 Finisher Communication Fail .......................................86047-320 ALL Destination Tray Broken .......................................86 CHAIN 61061-350 LPH Power On Fail Y ...............................................87061-351 LPH Power On Fail M ...............................................87061-352 LPH Power On Fail C ...............................................88061-353 LPH Power On Fail K ...............................................88061-354 LPH Download Data Fail Y ..........................................89061-355 LPH Download Data Fail M ..........................................89061-356 LPH Download Data Fail C ..........................................90061-357 LPH Download Data Fail K ..........................................90061-358 LPH Mismatch Fail Y ...............................................91061-359 LPH Mismatch Fail M ...............................................91061-360 LPH Mismatch Fail C ...............................................92061-361 LPH Mismatch Fail K ...............................................92061-362 LPH Read Fail Y ...................................................93061-363 LPH Read Fail M ...................................................93061-364 LPH Read Fail C ...................................................94061-365 LPH Read Fail K ...................................................94061-366 LPH Write Fail Y ..................................................95061-367 LPH Write Fail M ..................................................95061-368 LPH Write Fail C ..................................................96061-369 LPH Write Fail K ..................................................96061-370 LPH Act Fail Y ....................................................97061-371 LPH Act Fail M ....................................................97061-372 LPH Act Fail C ....................................................98061-373 LPH Act Fail K ....................................................98061-374 LPH Chip Fail Y ...................................................99061-375 LPH Chip Fail M ...................................................99061-376 LPH Chip Fail C ...................................................100061-377 LPH Chip Fail K ...................................................100061-378 LPH EEPROM Data Fail Y ............................................101061-379 LPH EEPROM Data Fail M ............................................101061-380 LPH EEPROM Data Fail C ............................................102061-381 LPH EEPROM Data Fail K ............................................102061-382 LPH EEPROM Primitive Data Fail Y ..................................103061-383 LPH EEPROM Primitive Data Fail M ..................................103061-384 LPH EEPROM Primitive Data Fail C ..................................104061-385 LPH EEPROM Primitive Data Fail K ..................................104061-386 LPH PLL Lock Fail Y ...............................................105061-387 LPH PLL Lock Fail M ...............................................105061-388 LPH PLL Lock Fail C ...............................................106061-389 LPH PLL Lock Fail K ...............................................106061-390 LPH Latch Timing Fail Y ...........................................107061-391 LPH Latch Timing Fail M ...........................................107061-392 LPH Latch Timing Fail C ...........................................108061-393 LPH Latch Timing Fail K ...........................................108061-394 LPH FFC Connect Fail Y ............................................109061-395 LPH FFC Connect Fail M ............................................109061-396 LPH FFC Connect Fail C ............................................110061-397 LPH FFC Connect Fail K ............................................110061-398 BITZ1 Initialize Fail .............................................111061-399 BITZ2 Initialize Fail .............................................111061-610 Bitz1 CONTIF Fail .................................................112061-611 Bitz2 CONTIF Fail .................................................112 CHAIN 62062-211 IIT/IPS EEPROM Local Fail （IPS）..................................113062-277 IIT/IPS-DADF Communication Fail ...................................113062-300 Platen Interlock Open .............................................114062-310 IIT/IPS-ESS Communication Fail ....................................114062-311 IIT Software Logic Fail ...........................................115062-330 HWM Hard Fail .....................................................115062-345 IIT/IPS EEPROM Fail （IIT）........................................116062-360 Carriage Position Fail ............................................116062-362 X Hard Fail .......................................................117062-371 Lamp Illumination Fail ............................................117062-380 Platen AGC Fail ...................................................118062-386 Platen AOC Fail ...................................................118062-389 Carriage Over Run Fail ............................................119062-392 IIT/IPS Memory Fail ...............................................119062-393 IIT/IPS PWB Fail ..................................................1202008/082-3ApeosPort-III/DocuCentre-III C3300/C2200/C2201故障诊断Version 1062-790 X- Recognition Fail................................................120 CHAIN 71071-105 Regi. Sensor On Jam （Tray1/2/3/4～）..............................121071-210 Tray 1 Lift Up Fail................................................121071-212 Tray 1 Paper Size Sensor Broken....................................122071-940 Tray 1 Lift Up NG..................................................122 CHAIN 72072-101 Tray 2 Miss Feed...................................................123072-102 Feed Out Sensor 2 On Jam （Tray3/4～）.............................124072-210 Tray 2 Lift Up Fail................................................124072-212 Tray 2 Paper Size Sensor Broken....................................125072-900 Tray 2 Feed Out Sensor Static Jam..................................125072-940 Tray 2 Lift Up NG..................................................126 CHAIN 73073-101 Tray 3 Miss Feed...................................................127073-102 Feed Out Sensor 3 On Jam （Tray4～）...............................128073-210 Tray 3 Lift Up Fail................................................128073-212 Tray 3 Paper Size Sensor Broken....................................129073-900 Tray 3 Feed Out Sensor Static Jam..................................129073-940 Tray 3 Lift Up NG..................................................130 CHAIN 74074-101 Tray 4 Miss Feed...................................................131074-210 Tray 4 Lift Up Fail................................................132074-212 Tray 4 Paper Size Sensor Broken....................................132074-900 Tray 4 Feed Out Sensor Static Jam..................................133074-940 Tray 4 Lift Up NG..................................................133 CHAIN 75075-100 MSI Miss Feed......................................................135075-103 MSI Feed Out Sensor Off Jam........................................135075-135 Regi. Sensor On Jam （MSI ～）......................................136075-212 MSI Nudger Up Down Fail............................................136 CHAIN 77077-101 Regi. Sensor Off Jam...............................................137077-103 Exit Sensor 1 Off Jam..............................................137077-105 Exit Sensor 2 Off Jam..............................................138077-106 Exit Sensor 1 On Jam...............................................138077-109 Exit Sensor 2 On Jam...............................................139077-110 POB Sensor On Jam..................................................139077-123 Regi. Sensor On Jam （Duplex Wait）.................................140077-130 Regi. Sensor On Jam （Duplex Direct）...............................140077-131 Duplex Wait Sensor On Jam..........................................141077-211 Tray Module Kind Mismatch..........................................141077-212 Tray Module Reset Fail.............................................142077-214 Tray Module Logic Fail.............................................142077-215 Tray Module Communication Fail.....................................143077-300 Front Cover Interlock Open.........................................143077-301 L/H Cover Interlock Open...........................................144077-305 Tray Module L/H Cover Open.........................................144077-307 Duplex Cover Open..................................................145077-308 L/H High Cover Open................................................145077-314 P/H Module Logic Fail..............................................146077-320 All Feed Tray Broken...............................................146077-602 OHP Sensor Fail....................................................147077-900 Regi. Sensor Static Jam............................................147077-901 Exit Sensor 1 Static Jam...........................................148077-902 Exit Sensor 2 Static Jam...........................................148077-903 POB Sensor Static Jam..............................................149077-907 Duplex Wait Sensor Static Jam......................................149 CHAIN 89089-600 RC Sample Lateral Fail-A1..........................................151089-601 RC Sample Block Fail-A1-In.........................................151089-603 RC Sample Block Fail-A1-Out........................................152089-604 RC Sample Block Fail-B-#1-In.......................................153089-606 RC SampleBlock Fail-B-#1-Out.......................................154089-607 RC Sample Block Fail-B-#2-In.......................................155089-609 RC Sample Block Fail-B-#2-Out......................................156089-610 RC Sample Block Fail-B-#3-In.......................................157089-612 RC Sample Block Fail-B-#3-Out......................................158089-613 RC Sample Block Fail-B-#4-In.......................................159089-615 RC Sample Block Fail-B-#4-In.......................................160089-616 RC Data Over Flow Fail.............................................161089-617 RC Data Over Range Fail............................................162089-622 RC Data Linearity Fail.............................................162089-624 PS Zphase Sensor Fail..............................................163 CHAIN 91091-310 Auger Broken.......................................................165091-313 CRU ASIC Communication Fail........................................165091-400 Waste Toner Bottle Near Full.......................................166091-401 Drum Cartridge K Near Life.........................................166091-402 Drum Cartridge K Life Over.........................................167091-411 Drum Cartridge Y Near Life.........................................167091-421 Drum Cartridge M Near Life.........................................168091-431 Drum Cartridge C Near Life.........................................168091-480 Drum Cartridge Y Life Over.........................................169091-481 Drum Cartridge M Life Over.........................................169091-482 Drum Cartridge C Life Over.........................................170091-910 Waste Toner Bottle Not In Position.................................170091-911 Waste Toner Bottle Full............................................171091-913 Drum Cartridge K Life End..........................................171091-914 Drum CRUM K Communication Fail.....................................172091-915 Drum CRUM K Data Broken............................................172091-916 Drum CRUM K Data Mismatch..........................................173091-917 Drum CRUM Y Communication Fail. (173)2008/082-4Version 1ApeosPort-III/DocuCentre-III C3300/C2200/C2201故障诊断091-918 Drum CRUM M Communication Fail ....................................174091-919 Drum CRUM C Communication Fail ....................................174091-921 Drum CRUM K Not In Position .......................................175091-927 Drum CRUM Y Not In Position .......................................175091-928 Drum CRUM M Not In Position .......................................176091-929 Drum CRUM C Not In Position .......................................176091-940 Drum CRUM Y Data Broken ...........................................177091-941 Drum CRUM M Data Broken ...........................................177091-942 Drum CRUM C Data Broken ...........................................178091-943 Drum CRUM Y Data Mismatch .........................................178091-944 Drum CRUM M Data Mismatch .........................................179091-945 Drum CRUM C Data Mismatch .........................................179 CHAIN 92092-312 ATC Fail ［Y］.....................................................181092-313 ATC Fail ［M］.....................................................181092-314 ATC Fail ［C］.....................................................182092-315 ATC Fail ［K］.....................................................182092-649 ADC Shutter Open Fail .............................................183092-650 ADC Shutter Close Fail ............................................183092-651 ADC Sensor Fail ...................................................184092-657 ATC Amplitude Fail ［Y］...........................................184092-658 ATC Amplitude Fail ［M］...........................................185092-659 ATC Amplitude Fail ［C］...........................................185092-660 ATC Amplitude Fail ［K］...........................................186092-661 Temperature Sensor Fail ...........................................186092-662 Humidity Sensor Fail ..............................................187092-665 ATC Average Fail ［Y］.............................................187092-666 ATC Average Fail ［M］.............................................188092-667 ATC Average Fail ［C］.............................................188092-668 ATC Average Fail ［K］.............................................189092-670 ADC Patch Fail ［Y］...............................................189092-671 ADC Patch Fail ［M］...............................................190092-672 ADC Patch Fail ［C］...............................................190092-673 ADC Patch Fail ［K］...............................................191092-675 ADC Mini Setup Fail ［Y］..........................................191092-676 ADC Mini Setup Fail ［M］..........................................192092-677 ADC Mini Setup Fail ［C］..........................................192092-678 ADC Mini Setup Fail ［K］..........................................193 CHAIN 93093-314 Y Disp Motor Fail .................................................195093-315 M Disp Motor Fail .................................................195093-316 C Disp Motor Fail .................................................196093-317 K Disp Motor Fail .................................................196093-400 Y Toner Cartridge Near Empty ......................................197093-406 K Toner Cartridge Pre Near Empty ..................................197093-407 Y Toner Cartridge Pre Near Empty ..................................198093-408 M Toner Cartridge Pre Near Empty ..................................198093-409 C Toner Cartridge Pre Near Empty ..................................199093-423 M Toner Cartridge Near Empty ......................................199093-424 C Toner Cartridge Near Empty ......................................200093-425 K Toner Cartridge Near Empty ......................................200093-912 K Toner Cartridge Empty ...........................................201093-916 Toner K CRUM Not In Position ......................................201093-924 Toner K CRUM Communication Fail ...................................202093-925 Toner K CRUM Data Broken Fail .....................................202093-926 Toner K CRUM Data Mismatch Fail ...................................203093-941 Toner M CRUM Communication Fail ...................................203093-942 Toner C CRUM Communication Fail ...................................204093-943 Toner Y CRUM Communication Fail ...................................204093-950 Toner Y CRUM Data Broken Fail .....................................205093-951 Toner M CRUM Data Broken Fail .....................................205093-952 Toner C CRUM Data Broken Fail .....................................206093-960 Toner Y CRUM Data Mismatch Fail ...................................206093-961 Toner M CRUM Data Mismatch Fail ...................................207093-962 Toner C CRUM Data Mismatch Fail ...................................207093-970 Toner Y CRUM Not In Position ......................................208093-971 Toner M CRUM Not In Position ......................................208093-972 Toner C CRUM Not In Position ......................................209 CHAIN 94094-300 IBT Front Cover Open ..............................................211094-320 1st BTR Contact/Retract Fail ......................................211094-323 2st BTR Contact/Retract Fail ......................................212094-324 Belt Home Fail Too Long ...........................................212094-417 IBT Unit Near End Warning .........................................213094-418 IBT CLN Unit Near End Warning .....................................213094-419 2nd BTR Unit Near End Warning .....................................214094-420 IBT Unit End Warning ..............................................214094-421 IBT CLN Unit End Warning ..........................................215094-422 2nd BTR Unit End Warning ..........................................2152.2.2 Other FIP2.2.2.1 AC Power FIP ......................................................2172.2.2.2 STBY ＋5VDC Power FIP .............................................2182.2.2.3 ＋5VDC Power FIP..................................................2182.2.2.4 ＋24VDC Power FIP.................................................2192.2.2.5 图像日志不良FIP...................................................2192.2.3 Generic FIP2.2.3.1 反射型传感器不良FIP...............................................2212.2.3.2 透过型传感器不良FIP...............................................2222.2.3.3 开关（Normal·Open）不良FIP ......................................2222.2.3.4 螺线管／离合器未激磁故障FIP.......................................2232.2.3.5 螺线管／离合器持续激磁故障FIP.....................................2232.2.3.6 马达不转动故障FIP.................................................2242.2.3.7 马达持续转动故障FIP...............................................2242.2.3.8 NIP/RELEASE SOLENOID 不激磁故障FIP ................................2252.3 All Controller FIP 2.3.1 OF-xxx FIP2008/082-5ApeosPort-III/DocuCentre-III C3300/C2200/C2201故障诊断Version 1OF-01 Common System Fail (227)OF-02 HDD System Fail......................................................227OF-03 NET ／USB System Fail................................................229OF-04 Panel System Fail....................................................229OF-05 IIT System Fail......................................................230OF-06 IOT System Fail......................................................230OF-07 FAX System Fail......................................................231OF-08 116-324 Fail.........................................................231OF-09 Common Job Fail......................................................232OF-10 HDD Job Fail.........................................................232OF-11 FAX Job Fail.........................................................233OF-12 033-363 Fail.........................................................233OF-13 016-782∕016-784 Fail...............................................234OF-14 FAX Card Fail........................................................235OF-15 NET Job Fail.........................................................235OF-30 ［无错误代码］（访问时未发生故障的状态）..............................236OF-31 ［无错误代码］（［打开电源时不启动］故障发生或可再现的状态）...........236OF-32 ［无错误代码］（［未从节电状态恢复］故障发生或可再现的状态）...........237OF-33 ［无错误代码］（［一直处于可以复印／打印的状态］故障发生或可再现的状态）2372.3.2 Controller FIP 002-xxx FIP002-500 UI error...........................................................238002-770 JT Processing - HD Full............................................238 003-xxx FIP003-310 IIT extension memory capacity is insufficient......................239003-318 IITsc Soft Fail....................................................239003-319 IITsc Video Driver Detection Fail..................................239003-320 IISS-ESS Communication Fail 1......................................239003-321 IISS-ESS Communication Fail 2......................................239003-322 IISS-ESS Communication Fail 3......................................239003-323 IISS-ESS Communication Fail 4......................................240003-324 IISS-ESS Communication Fail 5......................................240003-325 IISS-ESS Communication Fail 6......................................240003-326 IISS-ESS Communication Fail 7......................................240003-327 IISS-ESS Communication Fail 8......................................240003-328 IISS-ESS Communication Fail 9......................................240003-329 IISS-ESS Communication Fail 10.....................................241003-330 IISS-ESS Communication Fail 11.....................................241003-331 IISS-ESS Communication Fail 12.....................................241003-332 IISS-ESS Communication Fail 13.....................................241003-333 IISS-ESS Communication Fail 14.....................................241003-334 IISS-ESS Communication Fail 15.....................................241003-335 IISS-ESS Communication Fail 16.....................................241003-336 IISS-ESS Communication Fail 17.....................................242003-337 IISS-ESS Communication Fail 18.....................................242003-338 IISS-ESS Communication Fail 19.....................................242003-339 IISS-ESS Communication Fail 20.....................................242003-340 IISS-ESS Communication Fail 21.....................................242003-341 IISS-ESS Communication Fail 22.....................................242003-342 IISS-ESS Communication Fail 23.....................................242003-343 IISS-ESS Communication Fail 24.....................................243003-344 IISS_ESS X Hotline Fail PowerOn....................................243003-345 X PIO Unmatch Fail 1...............................................243003-346 X PIO Unmatch Fail 2...............................................243003-701 Duplication prevention code detect.................................243003-702 Different magnification, for surface and back of a document.......243003-750 Book Duplex-Insufficient Docs......................................243003-751 Under PANTHER Capacity （Scan）.....................................244003-752 Cannot scan 600DPI.................................................244003-753 Cannot scan over 300DPI............................................244003-754 S2X recoverable error..............................................244003-755 S2X command error..................................................244003-756 S2X command error..................................................244003-757 Cannot scan over 400DPI............................................244003-760 Scan Settings Error................................................245003-761 Incorrect Paper Tray Size..........................................245003-763 Adjustment Chart Not Found.........................................245003-764 Document Insufficient ﹙Image Overlay ﹚...........................245003-780 Scan Image Compression Error.......................................245003-795 AMS Limit Error....................................................245003-930 Cannot scan over 300DPI............................................246003-931 Cannot scan over 400DPI.............................................246003-932 Cannot scan 600DPI.................................................246003-933 Next Documents Cannot scan over 300DPI.............................246003-934 Next Documents Cannot scan over 400DPI.............................246003-935 Next Documents Cannot scan over 600DPI.............................246003-940 DAM Memory Insufficient............................................247003-942 Document Size Auto Detect Error....................................247003-944 Image Repeat Count Fail............................................247003-946 Every Direction Difference （Copy APS）.............................247003-947 Return Documents Counts Error......................................247003-948 Return Documents mismatch..........................................247003-951 1job Max Page Over.................................................248003-952 Return Documents Color Mismatch....................................248003-955 Documents Size Exchange Error......................................248003-956 Documents Size Unknown Error.......................................248003-963 No APS Object Tray.................................................248003-965 ATS ／APS No Paper （IITsc Detect）.................................248003-966 ATS ／APS No Destination （IITsc）..................................249003-967 DADF APS No Destination............................................249003-968 Punch Position Error...............................................249003-969 Punch Size Error...................................................249003-971 prevention code detect with the right to cancel....................249003-972 Maximum Stored Page Over Flow......................................249003-973 Every Direction Difference.........................................250003-974 Next Original Specification. (250)。
复印机维修手册全集
复印机维修手册（全集）一、复印机出现故障后的检查与维修步骤：复印机出现故障后，总有一种是主要的故障，抓住这个主要的故障进行分析，即可找到故障原因和排除的方法，我们一般可通过以下几条途径来查出故障的原因并排除之。
检修时应遵循先易后难的原则并逐步缩小范围，最后集中于某一点上。
一、了解情况维修机器前首先应认真询问操作者有关情况，如机器使用了多久，上次维修（保养）是在什么时间，维修（保养）效果如何，此次是什么情况下出现的故障。
还要认真翻阅机器有关维修记录，注意近期更换过哪些部件和消耗材料，有哪些到了使用期限而仍未更换过的零部件。
二、检查机器情况了解清楚以后，即可对机器进行全面检查，除了机内短路、打火等故障外，都可接通机器电源，复印几张，以便根据其效果进行进一步分析。
对于操作者提供的故障现象应特别注意，并在试机时细心观察。
三、准备工具在对机器进行检查的基础上，一般可对故障现象有个大致的了解，即可知道维修时需要哪些常用的专用工具，准备好将要使用的工具和材料后即可进行检查维修工作。
四、机器故障自检目前绝大多数复印机都装有彩色液晶显示面板，并设有卡纸等故障自检功能，一旦机器某一部件失灵或损坏，都能以字母数字告诉操作者。
比较常见的是故障代码，如NP系列复印机的故障代码为“E0~E8等，理光系列则以”U“加数字为代码，这些代码一出现分别表示印刷电路板，传感器、开关、接插件等工作状态异常，需要进行调整或更换。
作为机器的使用者，见到这些故障代码，应立即停机，关掉电源，请维修人员进行检修。
如果是自己修理，则必须找到与所使用机器型号相同的维修手册或维修说明书，在书中查到故障代码所表示的内容，再检查相应的零部件、电路板或电子元件。
第二、常见“共性”故障的检修由于复印机的种类和型号繁多，各制造厂生产的复印机各不相同，即使是同一个生产厂家生产的不同型号复印机也不完全一样。
因而在使用中所出现的故障现象还是有一些差别，这里仅对共性的、一般常见的故障及其成因和排除方法加以介绍。
施乐维修手册维修要领
施乐维修手册维修要领引言：施乐维修手册是一本专门为施乐品牌的电子设备维修人员编写的指导手册。
本手册旨在提供详细的维修指南，帮助维修人员了解并掌握维修施乐设备所需的技能和要领。
本文将介绍施乐维修手册中的重要内容，包括故障排除、常见维修问题和施乐设备的维护。
一、故障排除1. 检查电源：施乐设备故障的常见原因之一是电源问题。
维修人员应该先检查设备是否连接到电源，并确认电源是否稳定。
2. 检查连接：设备无法正常工作时，维修人员应该检查设备的连接情况，包括连接线是否松动或损坏。
3. 检查传感器：施乐设备中的传感器常常是故障的关键所在。
维修人员应该检查传感器的工作状态，并确保传感器没有损坏或污染。
4. 故障代码解读：施乐设备通常会显示故障代码，维修人员应该根据手册中提供的故障代码解读表，来了解故障的具体原因，并采取相应的维修措施。
二、常见维修问题1. 打印机无法打印：这是施乐设备中最常见的问题之一。
维修人员应该先检查打印机的连接情况，确保连接线正常。
然后，检查打印机的墨盒或墨粉是否用尽，需要更换。
2. 扫描仪无法正常工作：维修人员应该检查扫描仪的连接情况，确保连接线正常。
然后，检查扫描仪的驱动程序是否安装正确，是否需要更新。
3. 多功能一体机无法复印：维修人员应该先检查多功能一体机的连接情况，确保连接线正常。
然后，检查复印机的驱动程序是否安装正确，是否需要更新。
4. 邮件服务器设置问题：施乐设备通常可以通过邮件发送文件，但有时候会遇到邮件服务器设置问题。
维修人员应该检查邮件服务器配置是否正确，确保设备能够正常发送邮件。
三、施乐设备的维护1. 定期清洁：施乐设备使用一段时间后，会积累尘埃和污垢，影响设备的正常工作。
维修人员应该定期清洁设备的内部和外部，包括打印头、滚筒、传感器等部件。
2. 及时更换耗材：施乐设备的耗材，如墨盒或墨粉，使用一段时间后会减少或用尽。
维修人员应该及时更换耗材，以保证设备的正常工作。
3. 规范使用：施乐设备应该在规定的工作环境下使用，避免暴露在过热、潮湿或尘埃较多的环境中。
施乐维修手册需求规格说明书
施乐维修手册需求规格说明书一、概述施乐维修手册是为了方便用户维修和使用施乐产品而制定的指南。
本手册详细介绍了施乐产品的各项功能、故障排除方法、维护保养建议等内容，旨在为用户提供全面准确的信息支持。
二、产品概述本维修手册适用于所有施乐的产品型号，包括但不限于打印机、复印机、扫描仪等。
具体的产品型号和规格请参考相应产品资料。
三、操作指南1. 开机与关闭(1) 开机：按下电源按钮，等待设备启动完成并显示主界面。
(2) 关闭：在设备主界面点击“关机”，等待设备完全关闭后，再拔掉电源线。
2. 打印操作(1) 连接打印机：将打印机与电脑或其他设备连接，确保打印机正常工作。
(2) 选择打印选项：在打印设置界面选择页面大小、打印质量、打印份数等参数。
(3) 打印文件：选择需要打印的文件，点击打印按钮，等待打印完成。
3. 复印操作(1) 放置原件：将需要复印的文件放入扫描仪上的进纸口，并按照指示进行调整。
(2) 选择复印选项：在复印设置界面选择复印数量、色彩模式、纸张大小等参数。
(3) 开始复印：点击开始复印按钮，等待复印完成。
4. 故障排除在使用中遇到问题时，用户可以根据以下方法尝试解决：(1) 检查电源和连接：确保设备连接正常，电源供应稳定。
(2) 清洁保养：定期清理设备，拆卸并清理打印头或扫描仪上的灰尘。
(3) 参考故障代码：根据设备显示的故障代码，在故障代码手册中查找对应的故障原因和解决方法。
四、维护保养1. 清洁保养(1) 打印机：定期清理打印头、纸路等部件，防止灰尘积累影响打印质量。
(2) 复印机：清洁复印机扫描仪上方的玻璃板，以确保复印的文件清晰。
(3) 扫描仪：使用专用扫描仪清洁剂擦拭扫描仪的感光部件和玻璃面板。
2. 耗材更换(1) 打印机：根据打印机显示的墨盒或墨粉低量提醒，及时更换耗材。
(2) 复印机：更换复印纸时，请使用符合要求的纸张规格和质量。
五、安全注意事项1. 电源使用：使用正规的电源插座，并定期检查电源线是否磨损。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Chapter 5 Parts List12/20085-1DocuCentre-II C3000Parts-listVersion 1.25 Parts List5.1 Preface5.1.1 How to Use the Parts List......................................................................................35.1.2 Precautions ...........................................................................................................35.1.3 Plate Composition.................................................................................................45.1.4 Terminology and Symbols.....................................................................................45.1.5 Using Parts Navigation..........................................................................................55.2 Parts List 1. DrivesPL 1.1 Main Drive...........................................................................................................7PL 1.2 Drum Drive Assembly.........................................................................................82. Paper TransportPL 2.1 Tray, Feeder Assembly.......................................................................................9PL 2.2 Tray 1..................................................................................................................10PL 2.3 Feeder 1 Assembly (1 of 2).................................................................................11PL 2.4 Feeder 1 Assembly (2 of 2).................................................................................12PL 2.5 Registration.........................................................................................................13PL 2.6 Vertical Transport Cover.....................................................................................14PL 2.7 Left Hand Cover, 2nd BTR Roll Assembly..........................................................153. ROSPL 3.1 ROS....................................................................................................................164. XerographicsPL 4.1 Drum Assembly, Waste Bottle Assembly............................................................17PL 4.2 Waste Bottle Guide Assembly ............................................................................185. DeveloperPL 5.1 Developer Component........................................................................................19PL 5.2 Developer Housing, Developer Cartridge...........................................................206. TransferPL 6.1 IBT, IBT Cleaner Assembly.................................................................................21PL 6.2 IBT Belt Assembly...............................................................................................227. FuserPL 7.1 Fuser Unit ...........................................................................................................23PL 7.2 Fuser Component...............................................................................................248. ExitPL 8.1 Exit......................................................................................................................25PL 8.2 Exit 1...................................................................................................................26PL 8.3 L/H Upper Chute Assembly (Exit 2)....................................................................27PL 8.4 Tray Guide Assembly (OCT 2)............................................................................289. MSIPL 9.1 MSI Assembly.....................................................................................................29PL 9.2 Lower Frame Assembly......................................................................................30PL 9.3 MSI Tray Assembly.............................................................................................3110. DuplexPL 10.1 Duplex...............................................................................................................32PL 10.2 Inner Chute Assembly.......................................................................................3311. Electrical ComponentsPL 11.1a Electrical (1/2).................................................................................................34PL 11.1b Electrical (2/2).................................................................................................35PL 11.2a ESS (DC-II C3000).........................................................................................36PL 11.2b ESS (DC-III C4100G)......................................................................................37PL 11.3 FAX Unit (Option)..............................................................................................38PL 11.4 Wire Harnesses................................................................................................3912. CoversPL 12.1 Cover-Front, Left...............................................................................................40PL 12.2 Cover-Rear, Right.............................................................................................4113. IITPL 13.1 Platen Cover/IIT Assembly...............................................................................42PL 13.2 Control Panel....................................................................................................43PL 13.3 Platen Glass......................................................................................................44PL 13.4 CCD PWB, Sensor............................................................................................45PL 13.5 Carriage Cable/Motor........................................................................................46PL 13.6 Full/Half Rate Carriage.....................................................................................4714. Tray Module-2TMPL 14.1 Tray 2/3 Assembly, Feeder Assembly-2TM......................................................48PL 14.2 Tray 2/3 Assembly-2TM....................................................................................49PL 14.3 Feeder 1/2 Assembly 2TM (1 of 2)...................................................................50PL 14.4 Feeder 1/2 Assembly 2TM (2 of 2)...................................................................51PL 14.5 Left Cover-2TM.................................................................................................52PL 14.6 Takeaway Roll-2TM..........................................................................................53PL 14.7 Electrical-2TM...................................................................................................54PL 14.8 Cover-2TM........................................................................................................5515. Tray Module-TTMPL 15.1 Tray 2/3, feeder Assembly-TTM.......................................................................56PL 15.2 Tray 2 Assembly-TTM.......................................................................................57PL 15.3 Tray 3 Assembly-TTM.......................................................................................58PL 15.4 Paper Feed (1 of 2)-TTM..................................................................................59PL 15.5 Paper Feed (2 of 2)-TTM..................................................................................60PL 15.6 Feeder 1 Assembly (1 of 2)...............................................................................61PL 15.7 Feeder 1 Assembly (2 of 2)...............................................................................62PL 15.8 Left Cover-TTM. (63)12/20085-2DocuCentre-II C3000Version 1.2Parts-listPL 15.9 Electrical-TTM (64)PL 15.10 Cover-TTM (65)16. DADFPL 16.1 DADF Accessory (66)PL 16.2 DADF Component Cover (67)PL 16.3 DADF Base Cover (68)PL 16.4 DADF Feeder Component (69)PL 16.5 Top Cover Component (70)PL 16.6 Takeaway Pinch Roll, Nudger Motor, Nudger/Feed Roll (71)PL 16.7 DADF Feeder-Chute (72)PL 16.8 DADF Feeder-Roll (73)PL 16.9 Motor Unit Assembly (74)PL 16.10 DADF Document Tray (75)17. Finisher-BPL 17.1 Finisher Unit (76)PL 17.2 H-Transport Assembly (1 of 2) (77)PL 17.3 H-Transport Assembly (2 of 2) (78)PL 17.4 Cover (79)PL 17.5 Top Open Cover and Eject Roll (80)PL 17.6 Paper Transport (1 of 2) (81)PL 17.7 Paper Transport (2 of 2) (82)PL 17.8 Staple Unit (83)PL 17.9 Compiler Tray Assembly (84)PL 17.10 Elevator (85)PL 17.11 Exit (86)PL 17.12 Electrical (87)PL 17.13 LVPS (88)PL 17.14 Rack (89)18. Mobile CabinetPL 18.1 Mobile Cabinet (90)98. Common Hardware98.1 Common Hardware (91)5.3 Parts Navigation5.3.1 Navi.1.1 (93)5.3.2 Navi.2.1 (93)5.3.3 Navi.2.2 (94)5.3.4 Navi.2.3 (94)5.3.5 Navi.2.4 (95)12/20085-3DocuCentre-II C3000Parts-list5.1 PrefaceVersion 1.25.1.1 How to Use the Parts ListChapter 5 Parts List contains information on spare parts.The parts list is used to order replacement parts and enter area codes. To use the parts list correctly,read the description below carefully.<How to find out parts No needed>To reduce a time to find out Parts No on E-Doc, FX put Navigation screen. Please refer to 5.3 Using Parts Navigation.5.1.2 Precautions•To make the illustration easy to see, hardware such as screws are shown in alphabets. Their shapes are not shown.•Read notes in the Description column carefully before ordering and replacing parts.•SCC followed by part name in the DESCRIPTION column represents Safety Critical Component.Handling Safety Critical Components shall conform to Fuji Xerox Co. Ltd.-stipulated rules and regulations on Safety Critical Components.•ISC followed by part name in the DESCRIPTION column represents Important Information Stored Component that stores important customer information. To replace and discard an ISC, follow the procedure for it described in chapter 4.•The area codes are shown on plates each. The area codes (such as toner and Current Adjustment values) which cannot be shown as parts on plates are listed on the list of area codes at the end of this chapter.12/20085-4DocuCentre-II C30005.1 PrefaceVersion 1.2Parts-list5.1.3 Plate Composition Figure 1 j0mf50001 5.1.4 Terminology and SymbolsTable 1Section Name Chapter 5 Section Name (1)Sub System Name the name of the subsystem(2)PLATE NO.Parts List Reference No. shown in each chapter(3)PLATE NAME Title name of the illustration, which shows the mechanism of the sub system(4)ITEM Matches the number in the illustration.(5)PART NO.The number to be used for ordering parts and filling in the ser-vice report.(6)DESCRIPTION Provides the part name, V(MOD) Code and notes, etc.(7)AREA CODEThe code to be entered in the failure column of the service report.Table 1Terminology and SymbolsDescriptionFigure 1 5002Informs you that the adjustment procedure for the part is described in Chapter 4 Repair and Adjustment.Figure 2 5001Informs you that the removal, installation and replacement procedures for the part are described in Chapter 4 Repair and Adjustment.Figure 3 5003Informs you that the removal, installation, replacement and adjustment procedures for the part are described in Chapter 4 Repair and Adjust-ment.3 4-10This is indicated on the upper left or upper right of the illustration to show the item represents the assembly including the part. The example shows Item 3 is the assembly of Item 4 through 10.(1/4PCS)Informs you that four identical parts are installed but that only one of them is shown in the illustration.- -This symbol in the PART NO. column shows the part is not managed as a spare part.(P/O Item 5)This symbol in the DESCRIPTION column shows the part is not man-aged as a single piece of spare part, but as a part of the assembly. The example shows the part is a part of Assembly Item 5.(New) (Old)This term in the DESCRIPTION column shows the new part is inter-changeable with the old one. Unless otherwise specified or there are no particular reasons, order the old part.(Alternate)This term in the DESCRIPTION column shows either one of the parts can be used.Figure 4 5005This symbol shows the whole area of the framed illustration is modified by the number in the circle. The area has the modified configuration.12/20085-5DocuCentre-II C3000Parts-list5.1 PrefaceVersion 1.25.1.5 Using Parts NavigationThis section describes how to use the Navigation screen (illustrated)The Navigation screen is divided into two layers, under which there is another layer of PLs.•The first (top) layer •Navi 1.1(Processor+Option)The whole processor including DADF and Finisher is illustrated each for good understanding. Find the module which includes the desired part and click on Navi 2.X or PL shown at the end of the call out. Navi 2.X shows there is a more detailed illustration of the module. Otherwise, you will be directly linked to the applicable PL.•The second layer •Navi 2.1 to 2.6The module found in Navi 1.1 is divided into more modules, which link to the related PLs.The screen here uses PLXX to show all the parts in the detailed module. Click on the applicable item, and you will see the illustration of the applicable PL. Find the desired part in the PL illustration to learn the part’s item no. After that, obtain the appropriate part no. from the list.On E-DOC, clicking on the item no. makes the List screen displayed. Then the appropriate part no. can be found.•The third (bottom) layer has PLXXs.<Returning from the lower layers to the higher layer>Clicking on Navi 2.X or PLXX on the upper left of the illustration makes you return to Navi 1.1 for Processor parts.Figure 5 5006This symbol shows the whole area of the framed illustration has not been modified by the number in the circle. The area still has the previ-ous configuration.Figure 6 4001The Item pointed to by this symbol in the illustration is modified by the number in the circle. The item has the modified configuration.Figure 7 4002The Item pointed to by this symbol in the illustration has not been modi-fied by the number in the circle. The item still has the previous configu-ration.with 5V This symbol in the DESCRIPTION column shows the part is modified by the number. The part has the modified configuration.(w/o 5V)This symbol in the DESCRIPTION column shows the part has not been modified by the number. The part still has the previous configuration.(SCC) Fuser AssemblySCC followed by part name in the DESCRIPTION column represents Safety Critical Component. Handling Safety Critical Components shall conform to Fuji Xerox Co. Ltd.-stipulated rules and regulations on Safety Critical Components.(ISC) NVM PWBISC followed by part name in the DESCRIPTION column represents Important Information Stored Component that stores important cus-tomer information. To replace and discard an ISC, follow the procedure for it described in chapter 4.Table 1Terminology and SymbolsDescription12/20085-6DocuCentre-II C30005.1 Preface Version 1.2 Parts-list12/20085-7DocuCentre-II C3000Parts-list5.2 Parts ListVersion 1.2PL 1.1 Main DriveItem Part Description A.C.1007K 97970Drum Drive Assembly (REP 1.1.2) (DC-IIIC4100G)–007K 93911Drum Drive Assembly (REP 1.1.2) (DC-IIC3000)2007K 93975Developer Drive Assembly (Item3-11)(REP 4.2.1)3127K 48670(SCC)Developer Motor (20W)4–Upper Bracket (P/O Item 2)5–Harness Guard (P/O Item 2)6–Gear (30/27T) (P/O Item 2)7–Gear (55/30T) (P/O Item 2)8–Gear (33T) (P/O Item 2)9–Bearing (P/O Item 2)10121K 36990(SCC)Toner Dispense Clutch 11–Lower Bracket (P/O Item 2)12007K 93963Main Drive Assembly (Item13-15)(REP 1.1.1)13127K 48660(SCC)Main Motor (25W)14127K 48670(SCC)Fuser Motor (20W)15–Bracket (P/O Item 12)16423W 06955Belt, Exit 1 17005E 17860Flange 18–Screw12/20085-8DocuCentre-II C30001. Drives Version 1.2 Parts-listPL 1.2 Drum Drive AssemblyItem Part Description A.C.1–Drum Shaft2–Plate3127K 48670(SCC)IBT Motor (20W)4930W 001112nd BTR Retract Sensor5127K 48680(SCC)Drum Motor6–Connector Bracket7–Harness Bracket8–Cam Wheel9–Sensor Bracket10–Upper Bracket11–Gear (50T)12–Gear (42/23T)13–Bearing14121K 40670(SCC)BTR2 Retract Clutch (DC-IIIC4100G)–121K 36640(SCC)BTR2 Retract Clutch (DC-IIC3000))15–Gear (27T)16121K 36660(SCC)IBT Cleaner Auger Clutch17–Gear (23T)18–Bearing19121K 36650(SCC)IBT Cleaner Retract Clutch20–Shaft21–Gear (37T)22–Bearing Sleeve23–Gear (80/45T)24–Shaft25–Gear (45T)26–Gear (35T)27–Bearing28–Gear (72T)29–Gear (144T)30–Bracket31–Gear (43T)32–Compression Spring33–IBT Auger Coupling34–Gear (53T)35–Shaft36–Coupling37–Shaft38930W 00111IBT Cleaner Retract Sensor12/20085-9DocuCentre-II C3000Parts-list2. Paper TransportVersion 1.2PL 2.1 Tray, Feeder AssemblyItem Part Description A.C.1003E 61510Tray Stopper 2014E 44710Tray Spacer3050K 53945Tray Assembly (PL 2.2)4110K 12100(SCC)Tray Paper Size Switch 5–Bracket6054K 27051Feeder Chute Assembly (Item7-10)(REP 2.1.1)7019K 07230Pad 8019K 07101Pad9038E 31210Paper Guide10–Feed Out Chute (P/O Item 6)11059K 42523Tray 1 Feeder Assembly (PL 2.3, PL 2.4) (REP 2.1.1)12893E 16040Tray No. 1 Label 13014E 56640Slide Lock Block 14892E 98771Label (Instruction)15–Cushion12/2008 5-10DocuCentre-II C30002. Paper Transport Version 1.2 Parts-listPL 2.2 Tray 1Item Part Description A.C.1604K 20541Gear Tray Kit(Item18-20)2–Tray Cover3–Slide Lock4–Label (Max)5–Bottom Plate6–Bottom Pad7–Front Side Guide8–Tray Pad9–Right Side Guide10–Side Actuator11–Side Actuator12–Spring13–Pinion14–End Guide15–Spring Guide16–End Guide Actuator17–End Link Guide18–Gear (13T) (P/O Item 1)19–Gear (13/60T) (P/O Item 1)20–Gear (60T) (P/O Item 1)21–Rear Plate22–Lift Shift23–Right Tray Stopper24–Seal25–Cassette Housing12/20085-11DocuCentre-II C3000Parts-list2. Paper TransportVersion 1.2PL 2.3 Feeder 1 Assembly (1 of 2)Item Part Description A.C.1–Upper Frame2127K 38171(SCC)Tray 1 Feed/ Lift Up Motor 3–Drive Bracket 4–Spacer 5–Gear (31T) 6–Spring 7–Clutch 8–Gear (24T)9–Gear (33T) 10–Bearing Shaft 11–Drive Shaft 12–Chute 13120E 22481Actuator14930W 00113Level Sensor 15930W 00113No Paper Sensor 16–Gear (28/21T) 17–Gear (29T) 18–Washer19930W 00211Prefeed Sensor20–Harness Rear Holder 21–Upper Harness Holder 22–Center Harness Holder 23–Rail12/2008 5-12DocuCentre-II C30002. Paper Transport Version 1.2 Parts-listPL 2.4 Feeder 1 Assembly (2 of 2)Item Part Description A.C.1–Spring2–Feed Roll (REP 2.3.1)(P/O Item 11)––Nudger Roll (REP 2.3.1)(P/O Item 11)––Retard Roll (REP 2.3.1)(P/O Item 11)3005K 05890(SCC)Clutch4005K 06760(SCC)Clutch (22T)5–Bearing6–Feed Shaft7–Feed In Chute8–Retension Spring9005K 07010(SCC)Friction Clutch10–Retard Support11604K 20530Feed Roll Tray Kit (3Pcs.) (Item2)12–Spacer13–Gear (13T)14–Support Nudger15–Spring16–Gear (25T)17962K 18912Feed Harness18–Rear Frame19–Bearing Sleeve20–Gear (34T)21–Lever22–Holder12/20085-13DocuCentre-II C3000Parts-list2. Paper TransportVersion 1.2PL 2.5 RegistrationItem Part Description A.C.1–Chute (DC-IIIC4100G)–054E 29410Chute (DC-IIC3000)2413W 77559Registration Bearing 3054E 29591Registration Chute 4014E 56310Adjust Skew Block 5059K 43231Registration Roller6121K 38310(SCC)Registration Clutch 7130K 64270(SCC)Registration Sensor 8849E 68400Bracket 9054K 30271Inlet Chute10130K 69250(SCC)Transparency Sensor 11–Cap (P/O Item 17)12130E 89600Conductor Out 13130E 89590Conductor In 14103E 36650Resistor15962K 36870Registration Harness 16–Paper Guide17059K 61870Registration Transport Assembly (Item2-16) (REP 2.4.1) (DC-IIIC4100G)–059K 44171Registration Transport Assembly (Item2-16) (REP 2.4.1) (DC-IIC3000)18054K 34270Chute Assembly (Item 1,19,20) (DC-IIIC4100G)19–Sensor (DC-IIIC4100G)20–Harness Assembly (DC-IIIC4100G)12/2008 5-14DocuCentre-II C30002. Paper Transport Version 1.2 Parts-listPL 2.6 Vertical Transport CoverItem Part Description A.C.1013E 29830Bearing2413W 77559Bearing3110E 11580(SCC)Lower L/H Cover Interlock4–Left Low Rivet5–Lower Chute6059K 56380Tray 1 Takeaway Roll (REP 2.5.1)7–Left Low Handle8–Left Low Bracket9–Bearing In10–Bearing Out11059E 98371Takeaway Pinch Roller12130K 64261(SCC)Tray 1 Feed Out Sensor (DC-IIC3000)13–Left Low Spring14–Spring-In15962K 23460Transport Sensor Harness (DC-IIC3000)16–Earth Plate17–Left Low Back Cover (DC-IIIC4100G)–802E 55701Left Low Back Cover (DC-IIC3000)18–Spring19807E 14660Gear (18T)20013E 26091Bearing21815E 27180Idler Bracket22807E 14650Idler Gear (54T)23807E 14640Idler Gear (21T)24807E 14630Idler Gear (37T)25807E 14620Gear (19T)26849E 64410Bracket27–Transport Bracket28013E 26060Bearing29121K 37120(SCC)Takeaway Roll Clutch30–Transport Shaft31849E 64400Switch Bracket32848K 05910Left Low Back Cover Assembly (Item 7-11,13,14,16-18) (DC-IIIC4100G)––Left Low Back Cover Assembly (Item 7-18) (DC-IIC3000)12/20085-15DocuCentre-II C3000Parts-list2. Paper TransportVersion 1.2PL 2.7 Left Hand Cover, 2nd BTR Roll AssemblyItem Part Description A.C.1848K 26490Left Hand Upper Cover Assembly (Item2-26,31) (REP 2.6.2) (DC-IIIC4100G)–802K 96291Left Hand Upper Cover Assembly (Item2-26) (REP 2.6.2) (DC-IIC3000)2802E 89192Left Hand Cover 3003E 65100Handle4–Spring (P/O Item 1)5054E 23950Cover Chute 6801K 21472Frame7–Guide Handle (P/O Item 1)8024E 03730Gear9849E 67970Cover Support 10054K 24060Duplex Chute 11019E 65530Duplex Pad 12032E 25090Guide13849E 64320Chute Support14–Spring (P/O Item 1)15054K 30341(SCC)Pinch Chute Assembly (Item16-23)16–Registration Pinch Chute (P/O Item 15)17–Pulley (P/O Item 15)18059K 43251Pinch Roller, Registration19–Extension Spring (P/O Item 15)20–Cap (P/O Item 15)21–Holder (P/O Item 15)22062E 12020Reflector23–Guide (P/O Item 15)24130E 89540Conductor 25802E 88280Earth Housing 26035E 73060Seal27849E 63710Interlock Switch Bracket28110E 97990(SCC)L/H Upper Cover Interlock Switch 29–Stud30059K 431512nd BTR Roll Assembly 31–Guide (DC-IIIC4100G)12/2008 5-16DocuCentre-II C30003. ROS Version 1.2 Parts-listPL 3.1 ROSItem Part Description A.C.1062K 18571(SCC)ROS Assembly (REP 3.1.1) (DC-IIIC4100G)–062K 16372(SCC)ROS Assembly (REP 3.1.1) (DC-IIC3000)2–Hex Screw (DC-IIC3000)3927W 00111(SCC)ROS Fan (DC-IIC3000)4–Duct5042K 93121ROS Cleaner Assembly(Item6-8)6–Guide Rod (P/O Item 5)7–Cleaner Rod (P/O Item 5)8042K 92880Cleaner Base12/20085-17DocuCentre-II C3000Parts-list4. XerographicsVersion 1.2PL 4.1 Drum Assembly, Waste Bottle AssemblyItem Part Description A.C.1122K 93890(SCC)Lamp, Erase Assembly2032K 98501Waste Bottle Guide Assembly (PL 4.2)3–Waste Toner Bottle 4113E 40450Holder PWB Crum5160K 95831(SCC)Xero Crum PWB (CP1)6–Connector 7962K 36820Harness8–Drum Cartridge (REP 4.2.3)9033K 96250Spiral Paddle10110K 13041(SCC)Xero Interlock Switch 11–Plate 12–Support12/2008 5-18DocuCentre-II C30004. Xerographics Version 1.2 Parts-listPL 4.2 Waste Bottle Guide AssemblyItem Part Description A.C.1068K 29580Bracket Sensor Assembly (Item2-4)2–Bracket Sensor (P/O Item 1)3–Waste Toner Bottle Sensor (P/O Item 1)4–toner Full Sensor (P/O Item 1)5–Waste Bottle Guide6052K 93890Pipe Collector (with Item 7)7835E 02121Toner Seal8005E 89320Middle Coupling9–Bearing Sleeve10–Auger Shaft11013K 03620Auger Bearing12807E 12770Gear (22T)13–IB Bracket14807E 12760Gear (17T)15413W 11660Bearing Sleeve16807E 12750Gear (24T)17807E 12740Gear (26T)18–Thrust Guide19–Shaft Slide20005E 89310Self Locate Coupling12/20085-19DocuCentre-II C3000Parts-list5. DeveloperVersion 1.2PL 5.1 Developer ComponentItem Part Description A.C.1802K 86741Toner Cartridge Door 2015K 71660Rotary Plate3–Rotary Release Knob 4–Shaft Lock5117K 37281Developer Wire6–Rotary Assembly (PL 5.2) 7113E 40340Rotary Holder 8849E 64110Sensor Plate9930W 00111Rotary Home Sensor (P/O Item 19)10–Harness Cover 11014E 56230Rotary Block 12–Lock Spring13127K 48862(SCC)Rotary Motor (REP 4.2.6)14–Rotary Cover (REP 4.1.1)15–IBT Tie Cleaner Plate16014K 82501Toner Cartridge Door Lock 17–Ground Plate18675K 38910Developer K (REP 4.2.7)–675K 38920Developer C (REP 4.2.7)–675K 38940Developer Y (REP 4.2.7)–675K 38930Developer M (REP 4.2.7)19130K 69210(SCC)Rotary Sensor Assembly (Item8,9)20115K 91320Developer Brush Assembly12/2008 5-20DocuCentre-II C30005. Developer Version 1.2 Parts-listPL 5.2 Developer Housing, Developer CartridgeItem Part Description A.C.1801K 21255Rotary Frame2802K 83415Developer K Housing (Item3-5,20,21) (REP 4.1.1)3–Developer Housing K (P/O Item 2)4–Front Cover K (P/O Item 2)5–Out Cover K (P/O Item 2)6802K 83556Cyan Developer Housing Assembly (Item7-9,20,21)(REP 4.1.1)7–Developer Housing C (P/O Item 6)8–Front Cover (P/O Item 6) (P/O Item 10) (P/O Item 14)9–Cyan Out Cover (P/O Item 6)10802K 83536Magenta Developer Housing Assembly(Item8,11,13,20,21) (REP 4.1.1)11–Magenta Developer Housing (P/O Item 10)12–Yellow Out Cover (P/O Item 14)13–Magenta Out Cover (P/O Item 10)14802K 83496Yellow Developer Housing Assembly(Item8,12,15,20,21) (REP 4.1.1)15–Yellow Developer Housing (P/O Item 14)16–Toner Cartridge (Yellow) (REP 4.1.2)17–Toner Cartridge (Magenta) (REP 4.1.2)18–Toner Cartridge (Black) (REP 4.1.2)19–Toner Cartridge (Cyan) (REP 4.1.2)20021E 11650Magnet Roll Cap21–Screw-Spacer12/20085-21DocuCentre-II C3000Parts-list6. TransferVersion 1.2PL 6.1 IBT, IBT Cleaner AssemblyItem Part Description A.C.1114K 82130BCR Connector 2–Wire Housing 3101K 52060Wire Housing4604K 43760IBT Belt Cleaner (REP 4.2.4)5807E 11660Gear (21T)6064K 92790IBT Belt Assembly (PL 6.2) (DC-IIIC4100G)–064K 92403IBT Belt Assembly (PL 6.2) (DC-IIC3000)7–Main Frame8–IBT Belt Tension Handle 9802K 85322Front Auger 10413W 14660Bearing Sleeve11–HVPS Right Housing 12–HVPS Left Housing 13–BCR Conductor12/2008 5-22DocuCentre-II C30006. Transfer Version 1.2 Parts-listPL 6.2 IBT Belt AssemblyItem Part Description A.C.1064K 92332IBT Belt (REP 4.2.5)2–IBT Frame3–Lower Tie Plate4–Bearing5–IBT Belt Tension Shaft6–Spacer7–Contact Arm (REP 4.2.8)8059K 43080Backup Roll9–Ball Bearing10–Inner Bracket11–flower lever12–Spring13–Bearing14–Backup Roll Bracket Assembly15–Spacer16–Contact Arm (REP 4.2.8)12/20085-23DocuCentre-II C3000Parts-list7. FuserVersion 1.2PL 7.1 Fuser UnitItem Part Description A.C.1015K 71820Exit Bracket Assembly (Item2-5)2–Exit Sensor Holder (P/O Item 1)3130E 82740(SCC)Fuser Exit Sensor 4120E 26920Exit Actuator 5809E 65340Actuator Spring6012K 94820Drive Link Assembly (Item7-9)7–Link Housing (P/O Item 6)8–Exit Link Spring (P/O Item 6)9–Drive Link (P/O Item 6)10126K 25930(SCC)Fuser Assembly (110V) (PL 7.2) (DC-IIIC4100G) (REP 5.1.1)–126K 23640(SCC)Fuser Assembly (110V) (PL 7.2) (DC-IIC3000) (REP 5.1.1)–126K 24451(SCC)Fuser Assembly (220V) (PL 7.2) (DC-IIIC4100G) (REP 5.1.1)–126K 23650(SCC)Fuser Assembly (220V) (PL 7.2) (DC-IIC3000) (REP 5.1.1)11–Link。