诺瓦科技LED视频处理器TVCtrl-230R规格书英文版
诺瓦科技无线LED控制卡MCTRL R5规格技术大全英文版
MCTRL R5 Independent ControllerSp e cificationsCopyright © 2018 Xi ’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi ’an NovaStar Tech Co., Ltd.TrademarkChange HistoryContentsis a trademark of Xi ’an NovaStar Tech Co., Ltd. StatementYou are welcome to use the product of Xi ’an NovaStar Tech Co., Ltd. ( h ereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Anyproblem in use or a ny good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible. Change HistoryChange History ................................................................................................................................ ii 11 Safety ...............................................................................................................................................1.1 Storage and Transport Safety (1)1.2 Installation and Use Safety .......................................................................................................................... 1 32 Overview ......................................................................................................................................... 3 Features ........................................................................................................................................... 4 4 Appearance ..................................................................................................................................... 5 Dimensions .................................................................................................................................... 75 6 8 Specifications .................................................................................................................................1 Safety1 S afetyThis chapter illustrates safety of the MCTRL R5 independent controller to ensure theproduct’s storage, transport, installation and use safety.Safety instructions are applicable to all personnel who contact or use the product.First of all, pay attention to following points.●Read through the instructions.●Retain all instructions.●Comply with all instructions.1.1 Storage and Transport Safety●Pay attention to dust and water prevention.●Avoid long-term direct sunlight.●Do not place the product at a position near fire and heat.●Do not place the product in an area containing explosive materials.●Do not place the product in a strong electromagnetic environment.●Place the product at a stable position to prevent damage or personal injurycaused by dropping.●Save the packing box and materials which will come in handy if you ever have tostore and ship the product. For maximum protection during storage and shipping,repack the product as it was originally packed at the factory.1.2 Installation and Use Safety●Only trained professionals may install the product.●Plugging and unplugging operations are prohibited when the power is on.●Ensure safe grounding of the product.●Beware of electric shock hazards.●Always wear a wrist band and insulating gloves.●Do not place the product in an area having frequent or strong shake.●Perform dust removing regularly.1 Safety●Contact NovaStar for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization.●Replace faulty parts only with the spare parts supplied by NovaStar.2 O verview2OverviewDeveloped by NovaStar, the MCTRL R5 is the first independent controller that supports rotation function. With up to 3840×1080@60Hz loading capacity of a single unit, it can support any custom resolution within this range as required, thus meeting the on-site configuration requirements of extra-long or extra-large LED displays. Working with the A8s or A10s, the MCTRL R5 supports free screen configuration on SmartLCT, presenting full rotation of the display screen at any angle, adding diversity to images, and bringing different visual experience to users.The MCTRL R5 is mainly applied to concert control centers, live events, security monitoring, Olympic Games and various sports centers.3 F eatures3Features4 A ppearance●Provides complete input connectors, including 1 × 6G-SDI, 1 × dual-link DVI and1 × HDMI 1.4.●Supports 8 × Gigabit Ethernet ports and 2 × fiber optical outputs.●Supports rotation of LED screens at any angle.●Adopts innovative architectural design to enable smart configuration, which cangreatly shorten the stage preparation time.●Adopts NovaStar G4 engine to realize a perfect image display with no flickeringand scanning lines, but fine quality and good sense of depth.●Supports NovaStar's latest pixel level calibration technology with a fast andefficient process.●Implements white balance calibration and color gamut mapping to ensure colorsare faithfully reproduced.●Supports screen configuration at any time without a PC.●Supports easy and quick manual adjustment of screen brightness.●Supports hardware upgrade via USB on the front panel.●Supports cascading multiple controllers for uniform control.4 AppearanceRear PanelInput Voltage AC 100-240 V 50/60 Hz Rated Power Consumption 25 WOperating Temperature-20°C –60°C Operating Humidity10% RH –90% RH DimensionsWeight 4.3 kg5 Dimensions482.6 mm × 334.6 m m × 52 .0 mmIndependent Controller MCTRL R5 Specifications。
诺瓦科技LED控制器MCTRL600规格书英文版
Specifications Independent Controller MCTRL600V2.1.0NS110100121Xi ’a n N ov a S t a r Te ch Co .,L t d .OverviewMCTRL600 is an advanced model of Nova controllers, which supports extra-large resolution. With HDMI/DVI video input and four Ethernet port outputs, a single unit is able to load 2560×960. Multiple units can be cascaded for uniform control.Feature1) HDMI/DVI input;2) HDMI/external audio input;3) 12bit/10bit/8bit HD video source;4) Resolution supported: 2048×1152，1920×1200，2560×960; 5) Resolution supported: 1440×900 (12bit/10bit);6) 1 light sensor interface; 7) Cascading supported;8) 18bit gray scale processing and presentation; 9) Video format: RGB, YCrCb4:2:2, YCrCb4:4:4;10) Standard 1U housing and independent power supply.Xi ’a nN ov aS t ar Te ch Co .,L t d .Appearanceduring authorization.INPUTS X i’a t a rT e ch C.Dimensions19" 1U Standard Cabinet.Unit: mmXi ’a nN ov aS t ar Te ch Co .,L t d .Specifications.FCC CautionAny Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Xi ’a nN ov aS t ar Te ch Co .,L t d .。
诺瓦科技光电转换器CVT-Rack320规格书英文版
CVT-Rack320Fiber ConverterDocument Version:V1.1.0Document Number: NS110100445SpecificationsXI 'AN N OVA S T AR T EC HCO .,L T D.Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.X I'A NN OV AS TA RT EC HC O.,LT D.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC O.Specifications ContentsContentsChange History (ii)Contents ........................................................................................................................................... i ii 1 Safety .. (1)1.1 Storage and Transport Safety (1)1.2 Installation and Use Safety (1)2 Overview (2)3 Features (3)4 Appearance (4)5 Dimensions (6)6 Specifications (7)X I'A NN OV AS TA RT EC HC O.,LT D.Specifications1 Safety1SafetyThis chapter illustrates safety of the CVT-Rack320 fiber converter to ensure the product’s storage, transport, i nstallation and use safety.Safety instructions are applicable to all personnel who contact or use the product. First of all, pay attention to following points.● Read through the instructions. ● Retain all instructions. ●Comply with all instructions.1.1 Storage and Transport Safety● Pay attention to dust and water prevention. ● Avoid long-term direct sunlight.● Do not place the product at a position near fire and heat.● Do not place the product in an area containing explosive materials. ● Do not place the product in a strong electromagnetic environment. ● Place the product at a stable position to prevent damage or personal injury caused by dropping.●Save the packing box and materials which will come in handy if you ever have to store and ship the product. For maximum protection during storage and shipping, repack the product as it was originally packed at the factory.1.2 Installation and Use Safety ● Only trained professionals may install the product.● Plugging and unplugging operations are prohibited when the power is on. ● Ensure safe grounding of the product. ● Beware of electric shock hazards.● Always wear a wrist band and insulating gloves.● Do not place the product in an area having frequent or strong shake. ● Perform dust removing regularly.● Contact NovaStar for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization. ●Replace faulty parts only with the spare parts supplied by NovaStar.XI 'A N N OVA S T AR T EC HCO .,L T D.2 Overview CVT-Rack320 is a multi-channel fiber converter developed by NovaStar. It has 4-channel, 8-channel, 12-channel, and 16-channel models to fulfill conversion between optical signals and electrical signals.The CVT-Rack310 supports single-mode twin-core optical fiber and LC fiber connectors.The CVT-Rack310 converter is highly flexible in configuration by providing different numbers of channels for users to choose according to their own requirements. This document takes 16-channel CVT-Rack 320 as an example to illustrate.X I'A NN OV AS TA RT EC HC O.,LT D.3 Features●Features 16 × RJ45 Ethernet ports and 16 × optical fiber connectors.●Features AC 100-240V 50/60Hz power supply.●Applies single-mode twin-core optical fiber and LC fiber connectors, with atransmission distance of 15 km.X I'A NN OV AS TA RT EC HC O.,LT D.4AppearanceFront PanelRear PanelXI 'AN N OC HCO .,L T D.X I'A NN OV AS TA RT EC HCSpecifications5 Dimensions5DimensionsUnit: mmXI 'AN NOVA S T AR T E C HCO .,L T D.Fiber Converter CVT-Rack320 Specifications 6 Specificationswww.novastar.tech 7 6 Specifications X I 'A D .。
诺瓦科技LED视频处理器VP200U规格书英文版
Specifications Video Processor VP200URev1.0.0 NS160100098Xi ’an N o v a St ar T ec hC o., L t d.OverviewVP200U is a video processor developed for display system of large-size LED displays. With the leading-edge chips of the industry used and 12-bit digital processing inside, it will bring us clearer images and richer colors.VP200U has adopted technologies such as Faroudja® DCDI de -interlacing video processing, Real Color® real color image processing, Faroudja®TureLife™ video image enhancement, etc. to perfect the display of video image.The maximum output resolution of a single unit is up to 2304x1152 and it allows to customize output resolution. VP200U has multiple special switching effects like signal cut and fade. The size and position of PIP can be set as you wish and AIAO (Any In Any Out) is supported.In addition, VP200U supports USB drive play with the features of automatic detection and plug-and-play, which has made it much easier and more flexible to use.Features 1) VP200U has a full range of video input interfaces, including AV ×2, VGA ×1, DVI ×1, HDMI ×1 and USB ×1.2) It will automatically detect and play files after USB drive is plugged, that is, plugand play.3) VP200U is a new product of NovaStar's video processor series, which is powerfulin image processing, professional in image control and friendly in user interface. 4) VP200U has provided switching effects such as seamless cut and fade to enhanceXi ’a n N o v a St ar T ec hC o., L t d.and present pictures with professional quality.5) The position and size of PIP are adjustable and can be controlled as you wish. 6) With an intuitive LCD interface and key indicator lights to simplify system control. 7) VP200U supports high-bit level video input, 10bit/8bit.8) VP200U supports custom output resolution and maximum video outputresolution is 2304x1152@60Hz.Dimensions(mm)Xi ’an N o v a St ar T ec hC o., L t d.AppearanceFront Panel: PIP closed;: PIP opened, Channel1 picture is moved to the top layer;: PIP opened, Channel2 picture is moved to the top layer;: Part display is enabled and the size of output image is the same as window size;: :: : : : : : Xv aRear PanelSpecificationsAppendix 1: Conflict list of PIP sourcesAppendix 2: Relevant parameters of USB interfacee c h。
诺瓦科技LED监控卡MON400规格书英文版
Monitoring CardMON400Document Version:V1.0.0Document Number: NS120100182SpecificationsXI 'AN NOVA S T AR T E C H CO .,LT D.Copyright © 2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a registered trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.X I'A NN OV AS TA RT EC HC O.,L TD.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC O.,L TSpecifications ContentsContentsChange History (ii)1 Safety (1)2 Overview (2)3 Features (3)4 Hardware Structure (4)4.1 Appearance (4)4.2 Dimensions (5)5 Specifications (6)X I'A NN OV AS TA RT EC HC O.,L TD.Specifications1 Safety1SafetyThis chapter illustrates safety of the MON400 monitoring card to ensure the product ’s storage, transport, installation and use safety. Safety instructions are applicable to all personnel who contact or use the product. First of all, pay attention to following points.● Read through the instructions. ● Retain all instructions. ●Comply with all instructions.Storage and Transport Safety● Pay attention to dust and water prevention. ● Avoid long-term direct sunlight.● Do not place the product at a position near fire and heat.● Do not place the product in an area containing explosive materials. ● Do not place the product in a strong electromagnetic environment. ● Place the product at a stable position to prevent damage or personal injury caused by dropping.●Save the packing box and materials which will come in handy if you ever have to store and ship the product. For maximum protection during storage and shipping, repack the product as it was originally packed at the factory.Installation and Use Safety● Only trained professionals may install the product.● Plugging and unplugging operations are prohibited when the power is on. ● Ensure safe grounding of the product.● Always wear a wrist band and insulating gloves.● Do not place the product in an area having frequent or strong shake. ● Perform dust removing regularly.● Contact NovaStar for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization. ●Replace faulty parts only with the spare parts supplied by NovaStar.XI 'AN NOVA S T AR T E C H CO .,LT D.2 Overview The MON400 is a monitoring card used to monitor environment parameters. By connecting various sensors, it can monitor wind speed, wind direction, PM2.5, noise, light brightness, temperature and humidity. It also provides GPS positioning and time synchronization functions. The MON400 is mainly used for street lamps, construction sites, agricultural facilities and small weather stations.The MON400 provides three automatic adjustment ways of the street lamp brightness, which are 5 V PWM, 3.3 V PWM and 0–10 V. It supports Novastar cluster control protocol, allowing to upload the collected environment parameters to the cloud server through wired or wireless network.X I'A NN OV AS TA RT EC HC O.,L TD.3 Features●Supports all kinds of sensors that adopt MODBUS-RTU protocol (the protocoldata format must be hexadecimal).●Supports any sensor with an RS485 connector.●Supports RF communication, and the frequency is 433 MHz.●Provides GPS positioning and time synchronization functions.●Supports wired network or 4G wireless network.●Supports the brightness control of maximum six street lamps simultaneously.●Provides three automatic adjustment ways of the street lamp brightness, whichare 5 V PWM, 3.3 V PWM and 0–10 V.●Supports data auto save function when the network is disconnected.●Supports upgrading firmware programs remotely or through a USB drive.●Supports NovaiCare, NovaStar's cloud-based monitoring platform.●Supports the third-party protocols.X I'A NN OV AS TA RT EC HC O.,L TD.4Hardware Structure4.1 AppearanceNote: Product images provided in this file are for reference only, and the actual products shallXI 'AN NOVA S T AR T E C H CO .,LT D.4.2 DimensionsThe board thickness is approximately 1.6 mm, and the total thickness (boardthickness + thickness of components on both front and rear panels) is not greaterthan 18.5 mm.The unit of dimension chart is “mm”. The location holes are connected to signalgrounds (GND).X I'A NN OV AS TA RT ESpecifications 5 Specifications5 SpecificationsX I'A NN OV AS TA RT。
诺瓦科技LED屏同步控制系统MCTRL4K规格书英文版
SpecificationsIndependent Controller MCTRL4KRev1.0.1 NS1601000126XI 'AN NOVA S T AR T E C H CO .,LT D.OverviewMCTRL4K is an independent master controller developed by NovaStarwith an epoch-making significance. The loading capacity of a single unitis up to 4096x2160@60Hz, which is able to meet the on-siterequirements of oversized LED displays. MCTRL4K makes it easier tocreate stunning visual effects for users.MCTRL4K also can be used as two independent master controllers,which makes it more flexible to load LED displays.The design of MCTRL4K is innovative. It allows to configure a display atany time without PC.Various video inputs such as DP, HDMI, dual-link DVI etc. and outputs of16-channel Neutrik Gigabit Ethernet ports as well as 4-channel opticalfiber ports are supported.X I'A NN OV AS TA RT EC HC O.,L TD.Features1) Complete video input interfaces: DP1.2 x 1, HDMI2.0 x 1, dual-link DVIx 2;2) Supports 16-channel Neutrik Gigabit Ethernet outputs and 4-channeloptical fiber outputs and maximum loading capacity of a single unit up to 4096x2160@60Hz;3) Supports two operating modes during dual-link DVI input: mosaicand multi-card;4) Innovative design to enable smart configuration which has greatlyshortened the time for stage preparation;5) NovaStar's G4 engine to create stable and flicker-free pictures withoutscanning lines, and bring smooth images with a good sense of layering;6) Supports NovaStar's latest pixel-by-pixel calibration technology, theprocess of which is fast and efficient;7) Enables white balance calibration and color gamut mapping based onthe different features of LEDs on the display to ensure the real restoration of color;8) Screen configuration can be done at any time without PC;9) Manual adjustment of screen brightness, which makes it much easierand quicker;10) Multiple controllers are able to be cascaded for uniform control.XI 'AN NOVA S T AR T E C H CO .,LT D.DimensionsDimensions of MCTRL4K (mm)XI 'AN NOVA S T AR T E C H CO .,LT D.AppearanceFront panelThe top section of the screen displays product name (customizable) and its IP address. The meanings of other sections are described as below:A: Input status of signal source. Blue indicates it has signal while gray indicates no signal.B: Current input source and its resolution, frame rate. For example, the information of two DVI sources will be displayed alternately here when dual-link DVI is selected as input.XI 'N NOVA S T AR D.X I'Rear panelXI 'SpecificationsX I'X I'A NN OV AS TA RT EC HC O.,L T。
诺瓦科技小间距LED屏全彩接收卡A8技术规格说明书英文版
A8Specifications Document Version:V1.2.0Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a registered trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accu racy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the prob l ems and adopt the suggestions after evaluation as soon as possible.Specifications Change HistoryChange HistorySpecifications ContentsContentsChange History (ii)1 Safety ...............................................................................................................................12 Overview ..........................................................................................................................23Features ...........................................................................................................................43.1 Improvement in DisplayEffect (4)3.2 Improvement inMaintainability (5)3.3 Improvement in HardwareReliability (6)3.4 Improvement in SoftwareReliability (6)4 Hardware (7)4.1 Appearance .................................................................................................................................................. 74.2Dimensions ............................................................................................................................................ (7)4.3 Indicators .......................................................................................................................................... (8)4.4 Definition of Data Interface( Top ) (9)4.1.1 32-Group ParallelData (9)4.1.2 64-Group SerialData ..............................................................................................................................124.1.3 Extended FunctionsDesign (14)5 Firmware Update (16)6 Applications (17)7 Specifications (18)A Abbreviation (19)B Terms (20)1 Safety1 S afetyThis chapter illustrates safety of the A8 receiving card to ensure the product’s storage,transport, installation and use safety. Safety instructions are applicable to allpersonnel who contact or use the product. First of all, pay attention to following points.●Read through the instructions.●Retain all instructions.●Comply with all instructions.Storage and Transport Safety●Pay attention to dust and water prevention.●Avoid long-term direct sunlight.●Do not place the product at a position near fire and heat.●Do not place the product in an area containing explosive materials.●Do not place the product in a strong electromagnetic environment.●Place the product at a stable position to prevent damage or personal injurycaused by dropping.●Save the packing box and materials which will come in handy if you ever have tostore and ship the product. For maximum protection during storage and shipping,repack the product as it was originally packed at the factory.Installation and Use Safety●Only trained professionals may install the product.●Plugging and unplugging operations are prohibited when the power is on.●Ensure safe grounding of the product.●Always wear a wrist band and insulating gloves.●Do not place the product in an area having frequent or strong shake.●Perform dust removing regularly.XI'ANNOVASTARTECHCO., ● Contact NovaStar for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization.●Replace faulty parts only with the spare parts supplied by NovaStar.2 Overview 2 O verview A8 is a high-end receiving card developed by NovaStar, featuring small size and largeloading capacity with a single card loading up to 512 x 256(PWM IC) pixels.A8 can work with the independent controller MCTRL R5, making display rotate at any angel. A8 can also work with the independent controller MCTRL4K featuring largeloading capacity and support HDR10 compliant video input, realizing larger dynamicbrightness range and larger color space, and making the image smoother.A8 supports pixel level brightness and chroma calibration by working with NovaLCT and NovaCLB to realize calibration on each pixel. It can effectively remove colordifference and greatly improve LED display image consistency, presenting smootherimages to users. In addition, it also supports image rotation in 90° increments,creating richer images and improving visual experiences. Software and hardware designs of the A8 concern the user deployment as well as operating and maintenance scenarios, enabling easier deployment, more stable operating and more efficient maintenance. Advanced hardware design:●The small-size hardware design is applicable to scenarios of small cabinet space and small pixel pitch. ● The used DDR3 connectors have stable contact performance and goodcompatibility. Useful software design: ● Support for HDR10. ●Support for low latency (Supported by dedicated firmware program). ● Support for 18Bit+.●Support for ClearView.●Support for LVDS transmission (Supported by dedicated firmware program).●Support for smart module (Supported by dedicated firmware program).●Support for quick seam correction.●Support for 3D function.●Support for auto module calibration.●Support for Mapping function.●Support for pre-stored image setting of the receiving card.2 Overview●Support for module Flash management.●Supports monitoring voltage and temperature of itself without using otherperipherals.●Support for monitoring of Ethernet cable communication status (Supported bydedicated firmware program).●Support for 5-pin LCD module.●Support for image rotation in 90° increments.Specifications 3 FeaturesReceiving Card A8Specifications 3 Features3.2provement in Hardware ReliabilityReceiving Card A8Specifications 4 Hardware Board thickness is not greater than 1.5 mm, and the total thickness (board thickness+ thickness of both front panel and back panel) is not greater than 6.5 mm.Unit of the dimension chart is “mm”. Ground connection is enabled for location hole(GND). 4Hardware 4.1AppearanceProduct images provided in this file are for reference only, and the actual productsshall prevail.Models of DDR3 connectors (connecting fingers) and receptacle used by A8 areshown in table Table 4-1.Table 4-1 Model of high-density connector4.2Dimensions4.4 Definition of Data Interface ( Top )Note 2. Operating indicator that meets low level is valid.Note 3. OE_RED, OE_GREEN and OE_BLUE are display enabled pins. In case that OE_RGB are not controlled separately, OE_RED is applied. While PWMchip is used, GCLK signal is enabled.Note 4. RFU1–18 are the reserved extended function interfaces. Please refer to “4.4.3 Extended Functions Design”.5 Firmware Update6 Applications7 Specifications6ApplicatioA8 is applied to LED display synchronous system which is generally composedLED display, HUB board, receiving card, video controller and controller peripher The receiving card is connected to the display over a HUB board.Synchronous system requires connecting a computer to display the computer ’ s images and texts on the LED screen. Structure of the synchronous system is as shown in the following figure.5Firmware UpdaStep 1 Visit www.novastar.tech to download the firmware update package and save it t Step 2 Run NovaLCT and choose User > Advanced Synchronous System User Loglog in. Step 3 Type the secret code " admin " to enter the program loading page.Step 4 Click Browse to select the program (the firmware update package you saved onpath and then click U pdate .Step 5 Click Refresh to check current hardware version information.A AbbreviationB Terms A Abbreviati FFPGA Field -P rogrammable Gate ArrayB Terms 18Bit+Specify the grayscale of LED displays. Enabling 18 bit mode on NovaLCT-Mars could improve LED display grayscale by 4 times, and therefore avoid grayscale losscaused by brightness reduction and make images finer.ClearViewDisplay screen effects. Enable ClearView on NovaLCT-Mars to adjust the texture,size and contrast in different area based on human visual system to make imagemore realistic.Calibration coefficientCalibration system generates a group of values for each LED lamp, including information about brightness and chroma. After display calibration, the calibration values of each lamp are just the calibration coefficient.Smart moduleThe smart module is composed of Flash and MCU.Flash could store calibration coefficients and lamp panel information. MCU could communicate with the receiving card to realize monitoring over temperature, voltage and wiring communication status, Working with the driver chip, A8 supports open circuit detection on LED.The smart module could make monitoring unit smaller, requiring no independent monitoring card and saving cabinet space.MappingAfter the Mapping function is enabled on NovaLCT, the target cabinet will display the cabinet number and Ethernet port information, and the user could get the receiving card’s location and wiring route.。
诺瓦科技LED视频处理器V900详细使用说明书
www.novastar.tech 5.10 工厂复位 ............................................................................................................................ 22 5.11 预设模板 ............................................................................................................................ 22 5.12 自定义按键 ........................................................................................................................ 22 5.13 硬件版本 ............................................................................................................................ 22 6 常见问题 ........................................................................................................................................... 23
3.1 前面板 .......................................................................................................................................5
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
TVCtrl-230R
Video Controller
Document Version:
V1.0.0
Specifications
X
I 'A
N N
O
V
A
S T A
R T E C H
C
O .,
L T D
.
Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.
No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.
Trademark
is a trademark of Xi’an NovaStar Tech Co., Ltd.
Statement
You are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.
X I'A N
N O
V A
S T
A R
T E
C H
C O
.,L T
D.
1 Overview The TVCtrl-230R video controller is a professional LED display controller from NovaStar. It is an all-in-one video controller which integrates the functions of front-
end video processing and display control. In addition, the new remote control method makes the complex on-site operations simpler and faster. Featuring powerful image processing, professional image control, and friendly OSD user interface, The TVCtrl-230R video controller makes display control ever easier.
X I'A N
N O
V A
S T
A R
T E
C H
C O
.,L T
D.
2
Features
● Supports a wide range of video inputs, including 1×VGA, 1×DVI, 1×HDMI, and 1×DP . Some of the inputs support resolutions up to 1920×1200@60Hz. ● Supports source switching with one click.
● Supports quick seamless switching effect to enhance and display the image with professional quality.
● Uses NovaStar's G4 engine to make the display image stable, flicker-free, no scanning lines and have a good sense of layering.
● Supports white balance calibration and gamut mapping according to different features of LEDs to ensure of colors can be faithfully reproduced.
● Designed with external independent audio input. ● Supports high-bit level video input: 10 bit/8 bit. ● Video output capacity: 2.3 million pixels. ●
System configuration can be done only with a remote controller. Computer
software is not required and all the operations can be completed in just a few steps. This is called "Touch Track". ●
Employs innovative architecture to achieve intelligent configuration which makes rapid debugging complete within minutes and extremely shortens stage
preparation time. ●
An intuitive OSD display interface and easy-to-use remote controller simplify the
system control.
X I 'A N N O V A S T A R T E C H
C
O .,
L T D
.
3 Connectors
X I'A N
N O
V A
S T
A R
T E
C H
C O
.,L T
D.
Specifications
4 Remote Controller
4
Remote Controller
Note: The up and down arrow keys are direction keys on the menu screen, while they have no functions on other screens.
X
I 'A
N N
O
V
A
S T A
R T E C H
C
O .,
L T D
.
Specifications
5 Dimensions
5
Dimensions
Unit: mm
X
I 'A
N N
O
V
A
S T A
R T E C H
C
O .,
L T D
.
Specifications 6 Specifications
6 Specifications。