Liraglutide_204656-20-2_DataSheet_MedChemExpress
岛津液相色谱仪教材
基础知识讲解内容
1、色谱基础知识 2、硬件基础知识 3、定量基础知识 4、维护基础知识
第一部分 色谱基础知识
色谱起源
石油醚
色素混合物 碳酸钙颗粒
色谱 分离组分
色谱发展史
20世纪初，俄国植物学家M.S. Tswett提出经典液相色谱法； 20-30年代，柱分配色谱和纸色谱； 50年代，气相色谱，薄层色谱； 60年代，凝胶渗透色谱及高效液相色谱； 70年代，高效毛细管气相色谱法； 80年代，电色谱； 90年代，光色谱。
滤膜类型： 聚四氟乙烯滤膜：适用于所有溶剂，酸和盐。
醋酸纤维滤膜：不适用于有机溶剂，特别适用于水 基溶剂。
尼龙66滤膜：适用于绝大多数有机溶剂和水溶 液，可以用于强酸，不适用于 DMF，THF， CHCl3 等溶剂。
再生纤维素滤膜：蛋白吸收低，同样适用于水溶性样 品和有机溶剂。
溶剂前处理-脱气
脱气：除去流动相中溶解或因混合而产生的气泡
毛细管电泳
Capillary Electrophoresis (CE)
HPLC vs GC
液相色谱：
以液体作为流动相的色谱分离方法
适用于高沸点、大分子、强极性 和热稳定性差的化合物的分析 流动相具有运载样品分子和选择 性分离的双重作用
气相色谱：
以气体作为流动相的色谱分离方法
适用于沸点较低、热稳定性好的中小分子 化合物的分析 流动相只起运载样品分子的能力
在售产品
岛津HPLC的历史
1997
THECNLOGY BREAKTHROUGH
Flexible HPLC System with Micro-stroke Volume Solvent Delivery Unit
LC-VP
ly62256_datasheet
Rev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.REVISION HISTORYRevision Description Issue Date Rev. 1.0. Initial Issue Jul.25.2004 Rev. 2.0. Revised Vcc Range(Vcc=4.5~5.5V => 2.7~5.5V) May.4.2005 Rev. 2.1. Revised I SB1 May.13.2005 Rev. 2.2 Adding PKG type : skinny P-DIP Aug.29.2005 Rev. 2.3 Revised V IH (min)=2.4V, V IL (max)=0.6V Feb.24.2006 Rev. 2.4 Revised V IH (min)=2.4V, V IL (max)=0.6V (V CC =2.7~3.6V) V IH (min)=2.4V, V IL (max)=0.8V (V CC =4.5~5.5V)Jul.31.2006Rev. 2.5 Revised STSOP Package Outline Dimension Mar.26.2008Rev. 2.6 Added SL gradeAdded I SB1/I DR values when T A = 25℃ and T A = 40℃Revised FEATURES & ORDERING INFORMATION Lead free and green package available to Green package availableAdded packing type in ORDERING INFORMATION Revised I SB1(MAX)Revised V TERM to V T1 and V T2Revised Test Condition of I SB1/I DRDeleted T SOLDER in ABSOLUTE MAXIMUN RATINGSMar.30.2009Rev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice. FEATURESFast access time : 35/55/70ns Low power consumption:Operating current : 20/15/10mA (TYP .) Standby current : 1μA (TYP .) Single 2.7~5.5V power supplyAll inputs and outputs TTL compatible Fully static operationTri-stateoutput Data retention voltage : 1.5V (MIN.) Green package available Package : 28-pin 600 mil PDIP 28-pin 330 mil SOP28-pin 8mm x 13.4mm STSOP28-pin 300 mil Skinny P-DIPGENERAL DESCRIPTIONThe LY62256 is a 262,144-bit low power CMOS static random access memory organized as 32,768 words by 8 bits. It is fabricated using very high performance, high reliability CMOS technology. Its standby current is stable within the range of operating temperature.The LY62256 is well designed for low power application, and particularly well suited for battery back-up nonvolatile memory application.The LY62256 operates from a single power supply of 2.7~5.5V and all inputs and outputs are fully TTL compatiblePRODUCT FAMILYPower DissipationProduct Family Operating Temperature Vcc Range Speed Standby(I SB1,TYP .) Operating(Icc,TYP .)LY62256 0 ~ 70℃ 2.7 ~ 5.5V 35/55/70ns 1µA20/15/10mA LY62256(E) -20 ~ 80℃ 2.7 ~ 5.5V 35/55/70ns 1µA 20/15/10mA LY62256(I) -40 ~ 85℃2.7 ~ 5.5V35/55/70ns1µA 20/15/10mAFUNCTIONAL BLOCK DIAGRAMVcc VssCE#WE#OE#PIN DESCRIPTIONSYMBOL DESCRIPTION A0 - A14 Address Inputs DQ0 – DQ7 Data Inputs/Outputs CE# Chip Enable Input WE# Write Enable Input OE#Output Enable InputV CC Power Supply V SS GroundRev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.PIN CONFIGURATIONA12A7A6A5A4A3A2A1A0DQ0DQ1DQ2VssA14Vcc A8A9A11A10DQ7DQ6DQ5DQ4DQ3Skinny P-DIP/P-DIP/SOPA13CE#OE#WE#STSOPDQ3A11A9A8A13DQ2A10A14A12A7A6A5Vcc DQ7DQ6DQ5DQ4Vss DQ1DQ0A0A1A2A4A3OE#WE#CE#ABSOLUTE MAXIMUN RATINGS*PARAMETER SYMBOL RATING UNITVoltage on V CC relative to V SS V T1 -0.5 to 6.5 V Voltage on any other pin relative to V SS V T2 -0.5 to V CC +0.5 V0 to 70(C grade)-20 to 80(E grade) Operating Temperature T A -40 to 85(I grade)℃ Storage TemperatureT STG -65 to 150℃ Power Dissipation P D 1 W DC Output CurrentI OUT 50 mA*Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to the absolute maximum rating conditions for extended period may affect device reliability.TRUTH TABLEMODE CE# OE# WE# I/O OPERATIONSUPPLY CURRENT Standby H X X High-Z I SB ,I SB1 Output Disable L H H High-Z I CC ,I CC1 Read L L H D OUT I CC ,I CC1 Write L X L D IN I CC ,I CC1IH ILRev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.DC ELECTRICAL CHARACTERISTICSPARAMETERSYMBOL TEST CONDITION MIN. TYP . *4MAX. UNIT Supply Voltage V CC 2.7 3.3 5.5 V Input High VoltageV IH *1 2.4 - V CC +0.5 VV CC = 2.7~3.6V - 0.5 - 0.6 V Input Low Voltage V IL *2V CC = 4.5~5.5V -0.5 - 0.8 V Input Leakage Current I LI V CC ≧ V IN ≧ V SS - 1 - 1 µAOutput Leakage Current I LO V CC ≧ V OUT ≧ V SS ,Output Disabled- 1 - 1 µA Output High Voltage V OH I OH = -1mA 2.4 3.0 - V Output Low Voltage V OL I OL = 2mA - - 0.4 V-35 - 20 50 mA -55 - 15 45 mAI CC Cycle time = Min.CE# = V IL , I I/O = 0mA Other pins at V IL or V IH -70 - 10 40 mAAverage Operating Power supply Current I CC1 Cycle time = 1µsCE#≦0.2V and I I/O = 0mA other pins at 0.2V or V CC -0.2V - 3 10 mAI SB CE# = V IH, other pins at V IL or V IH - 1 3 mALL - 1 20 µA LLE/LLI - 1 30 µA25℃- 1 3 µA SL *5SLE *5SLI *540℃- 1.5 4 µA SL - 1 10 µA Standby Power Supply Current I SB1 CE# V ≧CC -0.2V Others at 0.2V orV CC - 0.2V SLE/SLI - 1 20 µA1. V IH (max) = V CC + 3.0V for pulse width less than 10ns.2. V IL (min) = V SS -3.0V for pulse width less than 10ns.3. Over/Undershoot specifications are characterized, not 100% tested.4. Typical values are included for reference only and are not guaranteed or tested. Typical valued are measured at V CC = V CC (TYP .) and T A = 25℃5. This parameter is measured at V CC = 3.0VCAPACITANCE (T A = 25, f ℃ = 1.0MHz)PARAMETER SYMBOL MIN. MAX UNITInput Capacitance C IN - 6 pF Input/Output Capacitance C I/O -8 pFAC TEST CONDITIONSInput Pulse Levels0.2V to V CC - 0.2V Input Rise and Fall Times3ns Input and Output Timing Reference Levels 1.5VOutput Load C L = 50pF + 1TTL, I OH /I OL = -1mA/2mARev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.AC ELECTRICAL CHARACTERISTICS(1) READ CYCLELY62256-35 LY62256-55 LY62256-70PARAMETERSYM.MIN.MAX.MIN.MAX.MIN. MAX.UNIT Read Cycle Time t RC 35 - 55 - 70 - ns Address Access Time t AA - 35 - 55 - 70 ns Chip Enable Access Time t ACE - 35 - 55 - 70 ns Output Enable Access Time t OE - 25 - 30 - 35 ns Chip Enable to Output in Low-Z t CLZ * 10 - 10 - 10 - ns Output Enable to Output in Low-Z t OLZ * 5 - 5 - 5 - ns Chip Disable to Output in High-Z t CHZ * - 15 - 20 - 25 ns Output Disable to Output in High-Z t OHZ * - 15 - 20 - 25 ns Output Hold from Address Change t OH 10 - 10 - 10 - ns (2) WRITE CYCLELY62256-35 LY62256-55 LY62256-70PARAMETER SYM.MIN.MAX.MIN.MAX.MIN. MAX.UNIT Write Cycle Timet WC 35 - 55 - 70 - ns Address Valid to End of Write t AW 30 - 50 - 60 - ns Chip Enable to End of Write t CW 30 - 50 - 60 - ns Address Set-up Time t AS 0 - 0 - 0 - ns Write Pulse Width t WP 25 - 45 - 55 - ns Write Recovery Timet WR 0 - 0 - 0 - ns Data to Write Time Overlapt DW 20 - 25 - 30 - ns Data Hold from End of Write Time t DH 0 - 0 - 0 - ns Output Active from End of Write t OW * 5 - 5 - 5 - ns Write to Output in High-Z t WHZ * - 15 - 20 - 25 nsRev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.TIMING WAVEFORMSREAD CYCLE 1 (Address Controlled) (1,2)DoutAddressREAD CYCLE 2 (CE# and OE# Controlled) (1,3,4,5)DoutOE#CE#AddressNotes :1.WE# is high for read cycle.2.Device is continuously selected OE# = low, CE# = low .3.Address must be valid prior to or coincident with CE# = low ,; otherwise t AA is the limiting parameter.4.t CLZ , t OLZ , t CHZ and t OHZ are specified with C L = 5pF. Transition is measured ±500mV from steady state.5.At any given temperature and voltage condition, t CHZ is less than t CLZ , t OHZ is less than t OLZ.Rev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.WRITE CYCLE 1 (WE# Controlled) (1,2,3,5,6)DoutDinWE#CE#AddressWRITE CYCLE 2 (CE# Controlled) (1,2,5,6)DoutDinWE#CE#AddressNotes :1.WE#, CE# must be high during all address transitions.2.A write occurs during the overlap of a low CE#, low WE#.3.During a WE# controlled write cycle with OE# low, t WP must be greater than t WHZ + t DW to allow the drivers to turn off and data to be placed on the bus.4.During this period, I/O pins are in the output state, and input signals must not be applied.5.If the CE# low transition occurs simultaneously with or after WE# low transition, the outputs remain in a high impedance state.6.t OW and t WHZ are specified with C L = 5pF. Transition is measured ±500mV from steady state.Rev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.DATA RETENTION CHARACTERISTICSPARAMETER SYMBOL TEST CONDITION MIN. TYP . MAX.UNIT V CC for Data Retention V DR CE# V ≧CC - 0.2V 1.5 - 5.5VLL/LLE/LLI - 0.5 20 µA 25℃- 0.5 2 µA SL SLESLI 40℃- 1 3 µA SL - 0.5 8 µA Data Retention Current I DR V CC = 1.5VCE# V ≧CC - 0.2V Others at 0.2V or V CC -0.2VSLE/SLI - 0.5 15 µAChip Disable to Data Retention Time t CDR See Data RetentionWaveforms (below)0 - - nsRecovery Time t R t RC * - - ns RC * = Read Cycle TimeDATA RETENTION WAVEFORMVccCE#Rev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.PACKAGE OUTLINE DIMENSION28 pin 600 mil PDIP Package Outline DimensionRev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.28 pin 330 mil SOP Package Outline DimensionRev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specifications and products without notice.28 pin 8x13.4mm STSOP Package Outline DimensionDIMENSIONS IN MILLIMETERS DIMENSIONS IN INCHESSYMBOLSMIN NOM MAX MIN NOM MAXA 1.00 1.10 1.20 0.040 0.043 0.047 A1 0.05 - 0.15 0.002 - 0.006 A2 0.91 1.00 1.05 0.036 0.039 0.041 b 0.17 0.22 0.27 0.007 0.009 0.011 c 0.10 0.15 0.20 0.004 0.006 0.008 HD 13.20 13.40 13.60 0.520 0.528 0.535 D 11.70 11.80 11.90 0.461 0.465 0.469 E 7.90 8.00 8.10 0.311 0.315 0.319 e - 0.55 - - 0.0216 - L 0.30 0.50 0.70 0.012 0.020 0.028 L1 0.675 - - 0.027 - - Y 0.00 - 0.076 0.000 - 0.003Θ0° 3° 5° 0° 3° 5°Rev. 2.6 32K X 8 BIT LOW POWER CMOS SRAMLyontek Inc. reserves the rights to change the specificationsand products without notice.28 pin 300 mil PDIP Package Outline DimensionRev. 2.632K X 8 BIT LOW POWER CMOS SRAM ORDERING INFORMATIONLY62256 U V - WW XX Y ZZ : Packing TypeBlank : Tube or TrayT : Tape ReelY : Temperature RangeBlank : (Commercial) 0°C ~ 70°CE : (Extended) -20°C ~ +80°CI : (Industrial) -40°C ~ +85°CXX : Power TypeLL : Ultra Low PowerSL : Special Ultra Low PowerWW : Access Time(Speed)V : Lead InformationL : Green PackageU : Package TypeP : 28-pin 600 mil P-DIPS : 28-pin 330 mil SOPR : 28-pin 8 mm x 13.4 mm STSOPD : 28-pin 300 mil P-DIPLyontek Inc.reserves the rights to change the specifications and products without notice.Rev. 2.632K X 8 BIT LOW POWER CMOS SRAM THIS PAGE IS LEFT BLANK INTENTIONALLY.Lyontek Inc.reserves the rights to change the specifications and products without notice.。
碧云天CellTiter-Lumi
CellTiter-Lumi™ Plus II 发光法细胞活力检测试剂盒产品编号 产品名称包装 C0057S CellTiter-Lumi™ Plus II 发光法细胞活力检测试剂盒 100次 C0057M CellTiter-Lumi™ Plus II 发光法细胞活力检测试剂盒 500次 C0057L CellTiter-Lumi™ Plus II 发光法细胞活力检测试剂盒 2500次 C0057XLCellTiter-Lumi™ Plus II 发光法细胞活力检测试剂盒10000次产品简介：碧云天生产的CellTiter-Lumi™ Plus II 发光法细胞活力检测试剂盒(CellTiter-Lumi™ Plus II Luminescent Cell Viability Assay Kit)，简称CTL Plus II 发光法细胞活力检测试剂盒或CTL Plus II ，是一种通过化学发光法测定细胞内ATP 含量从而用于超高灵敏度、超宽线性范围定量检测活细胞数目的试剂盒。
本试剂盒的性能达到甚至在有些方面优于国外同类产品。
本产品是CellTiter-Lumi™ Plus 发光法细胞活力检测试剂盒(简称CTL Plus ，产品编号为C0068)的不同包装版本，两者的检测效果完全一致。
CTL Plus 为即用型液体，优点是无需配制即可以直接使用，缺点是长期保存需要置于-80ºC ，如果在-20ºC 保存时间较长后检测效果会逐渐下降；本产品，即CTL Plus II ，为CTL Plus 的冻干粉版本，使用前需要使用提供的缓冲液充分溶解底物冻干粉后才能使用，优点是在-20ºC 保存特别稳定。
本产品线性范围宽，96孔板中在12个至10万个细胞范围内有良好线性关系。
不同细胞的检测数量上限会有显著不同。
如果检测的细胞数量不超过3万，也可使用性价比更高但线性范围略窄的CellTiter-Lumi™发光法细胞活力检测试剂盒(C0065)。
线粒体呼吸链复合体Ⅳ 细胞色素 C 氧化酶活性检测试剂盒说明书
线粒体呼吸链复合体Ⅳ/细胞色素C 氧化酶活性检测试剂盒说明书微量法注意：本产品试剂有所变动，请注意并严格按照该说明书操作。
货号：BC0945规格：100T/96S产品组成：使用前请认真核对试剂体积与瓶内体积是否一致，有疑问请及时联系索莱宝工作人员。
试剂名称规格 保存条件 提取液液体75 mL×2瓶 2-8℃保存 试剂一液体33mL×1瓶 2-8℃保存 试剂二粉剂×2瓶 -20℃保存 试剂三粉剂×2支 2-8℃保存溶液的配制：1、 试剂二：试剂放于试剂瓶内玻璃瓶中。
临用前取1支加入13.5mL 试剂一溶解，用不完的试剂-20℃分装保存2周，避免反复冻融；2、 试剂三：试剂置于试剂瓶内EP 管中；临用前取1支加入2mL 试剂一溶解，用不完的试剂-20℃保存2周，避免反复冻融；3、 工作液的配制：临用前取0.5mL 试剂三加入到溶解好的4.5mL 试剂二中混合备用（约25T ），或者按比例现用现配。
产品说明：线粒体复合体Ⅳ又称细胞色素C 氧化酶，也是线粒体呼吸电子传递链主路和支路的共有成分，负责催化还原型细胞色素C 的氧化，并最终把电子传递给氧生成水。
还原型细胞色素C 在550nm 有特征光吸收，线粒体复合体Ⅳ催化还原型细胞色素C 生成氧化型细胞色素C ，因此550nm 光吸收下降速率能够反映线粒体复合体Ⅳ酶活性。
Reduced Cytochrome C （550nm ） Oxidized Cytochrome C注意：实验之前建议选择2-3个预期差异大的样本做预实验。
如果样本吸光值不在测量范围内建议稀释或者增加样本量进行检测。
需自备的仪器和用品：可见分光光度计/酶标仪、台式离心机、水浴锅/恒温培养箱、可调式移液器、微量玻璃比色皿/96孔板、研钵/匀浆器/细胞超声破碎仪、冰和蒸馏水。
操作步骤：一、样本处理（可适当调整待测样本量，具体比例可以参考文献）1. 称取约0.1g 组织或收集500万细胞，加入1.0 mL 提取液，用冰浴匀浆器或研钵匀浆。
双荧光素酶报告基因检测试剂盒
注意事项：
1) Fassay Buffer I和Fassay Substrate I应避免反复冻熔，可分装成合适体积分次使用。 Rassay Substrate II溶液应盖严存放，避免蒸发。配制好未用完的Fassay Reagent I和 Rassay Reagent II可在-20℃保存1月左右。
自动发光测定：
配制好的Fassay Reagent I和Rassay Reagent II置于测定仪内并连接好对应管道，Fassay Reagent I接第一注射管道，Rassay Reagent II接第二注射管道。各待测样品20 μl分别加 入测定管/板孔底部，启动自动测量程序。记录Firefly luciferase和Ranilla luciferase的发光 单位(RLU)。
测定前，在室温待Fassay Buffer I、Fassay Substrate I和Rassay Buffer II溶化，混匀（注意 避光）。按20/1比例用Fassay Buffer I稀释Fassay Substrate I，按50/1比例用Rassay Buffer II 稀释Rassay Substrate II，分别配制所需体积的Fassay Reagent I和Rassay Reagent II（注意 避光）。
2) 细胞裂解液一般在当天测定。如需隔日测定，应将样品于-20℃保存。长期保存应 在-80℃。测定样品量可为10~30μl个样品的两种试剂加入时间间 隔一致。
4) Rassay Reagent II可用于直接测定样品的Ranilla luciferase。需要注意的是，Rassay Reagent II直接测量的RLU要比双荧光素酶顺序检测获得的RLU高一些（反应体积 等因素的影响）。
xpt2046中文资料_数据手册_参数
XPT2046 Data Sheet
2007.5
Copyright©2007, SHENZHEN XPTEK TECHNOLOGY CO.,LTD
1/30
XPT2046 Touch Screen Controller
Copyright©2007, SHENZHEN XPTEK TECHNOLOGY CO.,LTD
2/30
XPT2046 Touch Screen Controller
General Description
The XPT2046 is a 4-wire resistive touch screen controller that incorporates a 12-bit 125 kHz sampling SAR type A/D converter. The XPT2046 operates down to 2.2V supply voltage and supports digital I/O interface voltage from 1.5V to VCC in order to connect low voltage uP. The XPT2046 can detect the pressed screen location by performing two A/D conversions. In addition to location, the XPT2046 also measures touch screen pressure.On-chip VREF can be utilized for analog auxiliary input, temperature measurement and battery monitoring withthe ability to measure voltage from 0V to 5V. The XPT2046 also has an on-chip temperature sensor The XPT2046 is available in 16pin QFN thin package(0.75mm in height) and has the operating temperature range of -40°C to +85°C
Liraglutide_AbMole中国_CAS号204656-20-2_M9311说明书Protocol
0.15 0.025
1.8
0.4
0.08
10
0.15
0.05
0.02
0.5
Km 系数
3
6
12
8
5
20
动物 A (mg/kg) = 动物 B (mg/kg) × 动物 B的Km系数 动物 A的Km系数
例如，依据体表面积折算法，将白藜芦醇用于小鼠的剂量22.4 mg/kg 换算成大鼠的剂量，需要将22.4 mg/kg 乘以小鼠的Km系数（3）， 再除以大鼠的Km系数（6），得到白藜芦醇用于大鼠的等效剂量为11.2 mg/kg。
10 mg 2.6658 mL 0.5332 mL 0.2666 mL
参考文献
Liraglutide Compromises Pancreatic β Cell Function in a Humanized Mouse Model. Abdulreda MH, et al. Cell Metab. 2016 Mar 8;23(3):541-6. PMID: 26876561.
储备液配制 以下数据基于产品分子量，对于特殊产品，请参照COA中的储备液配制条件和说明进行操作。
Concentration / Solvent Volume / Mass 1 mM 5 mM 10 mM
1 mg 0.2666 mL 0.0533 mL 0.0267 mL
5 mg 1.3329 mL 0.2666 mL 0.1333 mL
生物活性
Liraglutide在人血管内皮细胞（hVECs）中，减弱PAI-1的诱导作用以及VAM的表达。Liraglutide依赖于GLP-1R，抑制PAI-1和VAM的刺激 性表达。
体内研究中，Liraglutide处理后，在ApoE-/-小鼠模型中，小鼠的内皮功能得到了显著改善。Liraglutide在T2D小鼠模型中，通过增强胰腺 b细胞的增殖、增加其数量，减轻高血糖症。
安捷伦产品目录
15
Real-Time PCR
16
Mx3000P QPCR System
17
Brilliant III Ultra-Fast SYBR Green QPCR and QRT-PCR Reagents
18
Brilliant III Ultra-Fast QPCR and QRT-PCR Reagents
Agilent / STRATAGENE
Agilent website: /genomics
Welgene | Agilent Stratagene
威健股份有限公司 | Stratagene 總代理
Table of Content
Table of Contents
/ XL1-Red Competent Cells SoloPack Gold Supercompetent Cells
/ TK Competent Cells Specialty Cells
/ Classic Cells / Fine Chemicals For Competent Cells
適用於 UNG 去汙染或 bisulphite
sequencing
適用於 TA Cloning
最高敏感性
取代傳統 Taq 的好選擇
-
2
威健股份有限公司 | Stratagene 總代理
PCR Enzyme & Instrument
Agilent SureCycler 8800
市場上領先的 cycling 速度和 sample 體積 10 ～ 100 μL 簡易快速可以選擇 96 well 和 384 well 操作盤 優秀的溫控設備讓各個 well 都能保持溫度的穩定 七吋的高解析度觸控螢幕讓操作上更為簡便 可以透過網路遠端操控儀器及監控儀器 Agilent 專業的技術支援可以幫助您應對各種 PCR 的問題