高速透气阀(河海国际)
防爆透气阀相关标准
防爆透气阀相关标准防爆透气阀（Explosion-Proof Breather Valve）是一种用于防止气体或液体在贮罐、容器或系统中产生过压或过真空的装置，以确保系统安全运行。
相关的标准通常包括安全、可靠性和防爆性能的要求。
以下是一些可能与防爆透气阀相关的标准：1.ISO 28300:2008 - Petroleum, petrochemical and natural gasindustries - Venting of atmospheric and low-pressure storage tanks:•这是国际标准化组织（ISO）发布的关于石油、石化和天然气工业中大气和低压贮罐通风的标准，其中可能包含防爆透气阀的相关要求。
2.API 2000 - Venting Atmospheric and Low-Pressure StorageTanks:•美国石油学会（API）发布的标准，涵盖了贮罐通风的方方面面，也可能包括防爆透气阀的要求。
3.EN ISO 28300:2008 - Petroleum, petrochemical and naturalgas industries - Venting of atmospheric and low-pressure storage tanks:•欧洲标准化委员会（CEN）发布的标准，类似于ISO 28300，覆盖了石油、石化和天然气工业中贮罐通风的要求。
4.NFPA 30 - Flammable and Combustible Liquids Code:•美国国家消防协会（NFPA）发布的关于易燃和可燃液体的代码，其中可能包含了与防爆透气阀相关的安全和防爆要求。
请注意，具体适用的标准可能会根据阀门的用途、所在行业和国家地区而有所不同。
在选择、安装和使用防爆透气阀时，建议遵循适用的标准和法规，以确保其性能和安全性。
(整理)高速透气阀使用说明书
船用高速透气阀使用说明书目录前言———————（1）1高速透气阀的结构和主要技术参数———————（2）2运输和安装———————（6）3高速透气阀的工作原理———————（8）4基本功能与操作指南———————（9）5高速透气阀的维护保养———————（16）6常见故障的判别和维修———————（22）7售后服务———————（23）8用户信息反馈———————（24）前言高速透气阀又称高速排放压力/真空阀，它是真空阀、压力阀和高速排放装置三位一体的重力式自动控制压力大小的货油舱透气装置。
其功能在货油装载过程中可使大量的蒸发气混合气体排出货油舱。
当阀开启后，出口处的排气速度在任何流量下都大于30m/s，在卸载过程中可使大量的空气吸入货油舱，以平衡油舱压力；在驱除油气的过程中可使油气经本阀门排放出货油舱。
在正常航行中，由于温度变化，可使少量油气自动排出货油舱或使少量空气进入货油舱。
当油船甲板上出现火情时，本高速透气阀可阻止外界火苗进入受保护的舱室。
因此，高速透气阀是油船、化学品船必备的透气装置。
本阀门的结构设计制造及试验按GB/T19699-2005 ISO15364:2000《船舶与海上技术货油舱压力/真空阀》标准，IMO MSC/Circ.677《阻止火焰进入油船液货舱的装置设计、试验及安装的修订标准》，CB/T604-93《油舱空气管防火网》。
本公司生产的高速透气阀在达到排放压力时，其升程大，使用过程中无颤振，无撞击，其性能安全可靠。
本产品型式试验的试验项目有静水压力试验、气密试验、压力阀开启压力和关闭压力试验、真空阀开启压力和关闭压力试验、耐腐蚀试验、冰冻试验、压力阀流动性能试验、真空阀流动性能试验、金属防火网后燃试验、高速透气口后燃试验及耐久燃烧试验、驱气帽后燃试验。
产品使用前请仔细阅读本使用说明书。
使用本产品时应严格遵守警告语及注意事项，否则可能会引起危害船舶及人身安全等不良后果。
本使用说明书阅读后请妥然保管以备查阅。
高速透气阀使用说明书
船用高速透气阀使用说明书目录前言———————（1）1高速透气阀的结构和主要技术参数———————（2）2运输和安装———————（6）3高速透气阀的工作原理———————（8）4基本功能与操作指南———————（9）5高速透气阀的维护保养———————（16）6常见故障的判别和维修———————（22）7售后服务———————（23）8用户信息反馈———————（24）前言高速透气阀又称高速排放压力/真空阀，它是真空阀、压力阀和高速排放装置三位一体的重力式自动控制压力大小的货油舱透气装置。
其功能在货油装载过程中可使大量的蒸发气混合气体排出货油舱。
当阀开启后，出口处的排气速度在任何流量下都大于30m/s，在卸载过程中可使大量的空气吸入货油舱，以平衡油舱压力；在驱除油气的过程中可使油气经本阀门排放出货油舱。
在正常航行中，由于温度变化，可使少量油气自动排出货油舱或使少量空气进入货油舱。
当油船甲板上出现火情时，本高速透气阀可阻止外界火苗进入受保护的舱室。
因此，高速透气阀是油船、化学品船必备的透气装置。
本阀门的结构设计制造及试验按GB/T19699-2005 ISO15364:2000《船舶与海上技术货油舱压力/真空阀》标准，IMO MSC/Circ.677《阻止火焰进入油船液货舱的装置设计、试验及安装的修订标准》，CB/T604-93《油舱空气管防火网》。
本公司生产的高速透气阀在达到排放压力时，其升程大，使用过程中无颤振，无撞击，其性能安全可靠。
本产品型式试验的试验项目有静水压力试验、气密试验、压力阀开启压力和关闭压力试验、真空阀开启压力和关闭压力试验、耐腐蚀试验、冰冻试验、压力阀流动性能试验、真空阀流动性能试验、金属防火网后燃试验、高速透气口后燃试验及耐久燃烧试验、驱气帽后燃试验。
产品使用前请仔细阅读本使用说明书。
使用本产品时应严格遵守警告语及注意事项，否则可能会引起危害船舶及人身安全等不良后果。
本使用说明书阅读后请妥然保管以备查阅。
防水透气阀(呼吸器)要怎样
我们知道，安装防水透气阀（呼吸器）的目的是为了保持所装腔体的气压平衡，避免压力差。所以就需 要计算腔体在单位时间的气体压力变化量和单位时间防水透气阀（呼吸器）的透气量是否匹配。这就要知己 知彼了。首先需要了解我这个需要装透气阀的产品腔体几个特性：空腔体积、温度变化多少、多长时间有这 个变化？然后再看看透气阀的透气参数 。把这些搞清楚然后再算算透气阀的透气率基本就出来了。透气需求 和腔体体积、温度变化量、温度变化快慢有关。
东莞蒲微公司详解
防水透气阀(呼吸器)要怎样选择
如何选择防水透气阀(呼吸器)
ቤተ መጻሕፍቲ ባይዱ
防水透气阀又称螺纹型呼吸器及防水螺丝，由于对透气阀不了解，往往只从外观上去选择， 产品光泽度好，那家的型号比较大个，应该比较好，一些厂家为迎合客户的需求，在这些方面 下工夫，吸引客户，误入歧途。 其实从工作原理我们就不难理解，防水透气阀它应该有以下几 个关键指标：透气量、防护等级、环境适应性，下面我们来逐个介绍。
防爆呼吸排水阀产品说明书
ExdIIB防爆呼吸排水阀产品说明书第一节：总论1 概述防爆呼吸排水阀能在确保防爆电气设备防爆电机和防爆电气控制箱安全性能的前提下;它具有排气、排水的功能；同时也具备防尘、防潮湿、防海浪浪峰的优势;它是一种适合于各种环境下使用的Ex元件;2 材质不锈钢防酸钢3 防爆标准与隔爆分类防爆标准3.1.1符合附录B要求隔爆型式与国家防爆合格证编号3.2.1 ExdIIB型、;4 防护等级IP66中国南阳防爆电气研究所检验报告编号：0906w0025 产品特点防爆安全性5.1.1永不变形的刚性结构,在使用中永不磨损,防爆功能永恒;使用方便性5.2.1在保证内隔爆不变的基础上,外隔爆螺纹可以制成不同螺纹制式和不同的防护结构,以适应不同国家和不同场合的需要;排水可靠性5.3.1 ExdIIB防爆呼吸排水阀排水量为每分钟15~35毫升6 使用范围防爆电机排水防爆电气控制箱排水任何防爆电气设备有需要排气排水的都可以安装;7 安装部位防爆呼吸排水阀应安装在防爆电气设备的底部顺畅排水;8 防爆标志商标Ex符号防爆合格证编号型号全称第二节：知识产权、法律承诺、法律告知、时效约定1 知识产权防爆呼吸排水阀国家发明专利; 专利号：防爆呼吸排水阀国家实用新型专利：专利号：2 法律承诺使用方使用本产品后,由此而发生知识产权纠份,本公司愿承担法律责任;3 使用原则使用方均应按照本产品所规定的隔爆类型和隔爆容积进行设计安装;超越本产品规定范围的防爆产品设计,应做防爆试验;使用方均应按照、防爆标准中的螺纹公差和螺纹扣数执行;4 法律告知使用方使用本产品后,应遵守中华人民共和国知识产权法;保证不得自行仿制和委托第三方生产本产品;如若发生上述情形而产生的法律责任,应由使用方负全责,并承担民事赔偿责任;使用方使用本产品后,应遵守中华人民共和国知识产权法;保证不接纳第三方提供的仿制产品;如若发生上述情形而产生的法律责任,使用方应承担不可推卸的连带法律责任和民事赔偿责任;使用方使用仿冒产品后发生传爆责任,本公司不仅不承担法律责任,而且更要追究使用方和仿冒方的法律责任和民事赔偿责任;法律诉讼争议处理地点为中国苏州,使用中文进行;5 时效约定使用方设计图一经确认,本公司从提供的第一件产品起,上述法律承诺和法律告知,均告成立;以国家规定的发明专利时效为止;第三节：产品使用与安装1.ExdIIB级六角标准头防爆呼吸排水阀产品尺寸及安装示意图引用标准1.2.1国际公制螺纹M细牙依据GB/T196-2003标准执行;1.2.2统一英制螺纹UN依据ASME 标准执行;55°管螺纹G依据GB/T7307-2001标准执行1.2.4螺纹精度与公差配合,依据GB/T197-2003标准中的6g/6H公差带执行;1.2.5螺纹啮合扣数依据标准执行;1.2.6装配用弹簧垫圈依据GB/T93标准执行;1.2.7六角标准头依据GB/T5780-2000标准执行;ExdIIB级六角标准头防爆呼吸排水阀型号、规格、尺寸表一型号规格容积cm3 A B H S h h1合格证编号M10112S16 V≤12500机座号160以下M101 12 16 10合格证编号M12115S1825 V≤50000机座号180~225M121 15 25 18 13合格证编号M1618S2435 V=100000机座号250以上M16 18 35 24 16排水量1.4.1 排水量15mL/分1.4.2 排水量25mL/分1.4.3 排水量35mL/分2.ExdIIB级六角头厂标防爆呼吸排水阀产品尺寸及安装示意图引用标准2.2.1国际公制螺纹M细牙依据GB/T196-2003标准执行;2.2.2螺纹精度与公差配合,依据GB/T197-2003标准中的6g/6H公差带执行;2.2.3螺纹啮合扣数依据标准执行;2.2.4装配用碗型锁紧垫圈参照DIN6796标准执行;2.2.5六角头厂标安装组合件;参照GB/T5788-86标准变通实施;增加碗型锁紧垫圈与六角头厂标结合后,组合成一个活式法兰面六角头螺栓的创造设计,是基于坑式安装的方便和设备空间位置的狭窄,并可以与NPT螺纹互相转换的设计理念;碗型锁紧垫圈采用65Mn钢制作,热处理HRC40°~45°,具有超强的预紧自锁力,并与主件防爆呼吸排水阀一起通过了防爆试验;排水量2.4.1 排水量15mL/分2.4.2 排水量25mL/分2.4.3 排水量35mL/分第四节：碗型锁紧垫圈第五节：供货及售后服务1 供货原则供需双方应签定长期供货协议合同;供需双方应共同遵守中华人民共和国知识产权法;共同维护供需双方权益和义务;共同保证供需双方各自独立的市场地位;防爆呼吸排水阀六角头厂标;碗型锁紧垫圈与防爆呼吸排水阀整体提供; 防爆呼吸排水阀六角标准头;弹簧垫圈由客户依据GB/T93标准采购安装;。
高海拔地区换流阀漏水的原因分析及建议
高海拔地区换流阀漏水的原因分析及建议一、引言高海拔地区是指海拔在1500米以上的地区，由于气压低、氧气稀薄等特殊地理环境，使得设备和管道在这些地区工作时会面临一些特殊的问题，比如换流阀漏水。
本文就将对高海拔地区换流阀漏水的原因进行深入分析，并提出相应的解决建议，以期能够更好地解决在高海拔地区出现的换流阀漏水问题。
1. 温度变化高海拔地区的气候状况复杂多变，日夜温差大，昼夜温差大，以及季节性温度变化都会对设备和管道造成影响。
换流阀内部的零部件在温度变化的情况下容易发生膨胀和收缩，导致密封不严而发生漏水。
2. 气压问题高海拔地区的气压较低，空气密度小，氧气含量也较少，而换流阀内部一般是以空气为介质的，当气体在高海拔地区从高压到低压的情况下，易产生漏气现象，导致换流阀漏水。
3. 高寒地区的冻融作用高寒地区的冬季气温常年极低，昼夜温差大，而换流阀安装在室外的情况下，易受到冻融的影响。
在冬季，由于结冰膨胀的作用，会导致零部件的破裂，密封件的老化，从而引发换流阀的漏水问题。
4. 高海拔环境对材料的侵蚀高海拔环境下的空气中含有大量的氧气和水汽，对于金属零部件容易产生锈蚀，而部分密封圈等橡胶材料也容易老化，这些都会导致换流阀在高海拔地区容易出现漏水问题。
5. 设备选型不合适部分厂家为了降低成本，对于设备的选型可能不够谨慎，导致在高海拔地区的使用时出现一系列的问题，如密封不严、材质不适应高寒环境等，从而造成换流阀漏水的问题。
三、高海拔地区换流阀漏水的解决建议1. 采用耐高低温材料在高海拔地区安装换流阀时应选用特殊的耐高低温材料，比如采用碳素钢或者不锈钢材质，以提高耐腐蚀性和耐低温性能。
2. 优化设备结构在换流阀的设计上应考虑到高海拔环境下的气候特点，加大零部件的尺寸，增加密封件的弹性，提高对温度变化的适应能力。
3. 引入防冻措施在高寒地区安装换流阀时，应采取相应的防冻措施，比如加装保温设施，采用加热器对设备进行加热，以防止结冰膨胀导致的漏水问题。
高速透气阀使用说明书模板
船用高速透气阀使用说明书、尸■、■前言目录—( 1)1 高速透气阀的结构和主要技术参数—( 2)2 运输和安装( 6)3高速透气阀的工作原理------------ ———————( 8)4基本功能与操作指南-------------- ———————( 9)5高速透气阀的维护保养------------ ———————( 16)6 常见故障的判别和维修———————( 22)7 售后服务———————( 23)8 用户信息反馈( 24)、尸■、亠前言高速透气阀又称高速排放压力/真空阀, 它是真空阀、压力阀和高速排放装置三位一体的重力式自动控制压力大小的货油舱透气装置。
其功能在货油装载过程中可使大量的蒸发气混合气体排出货油舱。
当阀开启后, 出口处的排气速度在任何流量下都大于30m/s, 在卸载过程中可使大量的空气吸入货油舱, 以平衡油舱压力; 在驱除油气的过程中可使油气经本阀门排放出货油舱。
在正常航行中, 由于温度变化, 可使少量油气自动排出货油舱或使少量空气进入货油舱。
当油船甲板上出现火情时, 本高速透气阀可阻止外界火苗进入受保护的舱室。
因此, 高速透气阀是油船、化学品船必备的透气装置。
本阀门的结构设计制造及试验按GB/T19699- ISO15364:《船舶与海上技术货油舱压力/真空阀》标准, IMO MSC/Circ.677《阻止火焰进入油船液货舱的装置设计、试验及安装的修订标准》, CB/T604-93 《油舱空气管防火网》。
本公司生产的高速透气阀在达到排放压力时, 其升程大, 使用过程中无颤振, 无撞击, 其性能安全可靠。
本产品型式试验的试验项目有静水压力试验、气密试验、压力阀开启压力和关闭压力试验、真空阀开启压力和关闭压力试验、耐腐蚀试验、冰冻试验、压力阀流动性能试验、真空阀流动性能试验、金属防火网后燃试验、高速透气口后燃试验及耐久燃烧试验、驱气帽后燃试验。
产品使用前请仔细阅读本使用说明书。
HHB系列空气控制阀门参考手册说明书
Pneumatic “HHB” Series Air Control Valves4-Way, 4-Port, 2-Position Catalog 0665-2/USABasic Valve Features..................................................................................................2Model Index................................................................................................................3Ordering Information ..................................................................................................4Single Solenoid ValveHHB200, HHB208.................................................................................................5Double Solenoid ValveHHB400, HHB408.................................................................................................6HHB490, HHB498.................................................................................................7Single Air Operated ValveHHB100, HHB108.................................................................................................8Double Air Operated ValveHHB190, HHB198.................................................................................................9Dimensions2-Position Single & Double Solenoids.................................................................102-Position Single & Double Air Pilot ....................................................................11T echnical Information ..............................................................................................12Sandwich Pressure Regulator. (13)Table of ContentsTable of ContentsHHB200 Series Single Solenoid•Basic body size: 1/2 inch.•Subbase or manifold base mounted.•Valve body can be removed withoutbreaking plumbing or wiring connections.T wo mounting bolts attach body to base.•Nylon encapsulated coil seals out moisture,preventing corrosion of windings.•Low power consumption coil, 7.2 watts,is continuous duty rated.•Short stroke piston poppet gives extremely fast and consistent response.•Molded polyester poppet gives long operating life.•Suitable for non-lube service.•Shur-shift chamber “accumulator” assures positive shifting even at low pressure.•Corner sealing poppet assures long life, low wear, dirt tolerance, positive sealing with or without lubrication.•HHB valves can be installed on former 1/2 inch size HH subbases or Add-A-Fold bases.•Valves are furnished with internal pilot exhaust standard except those models with the sequence operator.•U.L. & CSA Listed.4-Way ValvesBasic Valve FeaturesBody &Port Basic SeriesOperatorBaseSizeVoltageOptionsNOTE : The following combinations are not offered:Option “F” and “V” for 400, 408 and 498 valves.Note: Shaded units are not standard stock items.4-Way ValvesModel Number IndexWhen Ordering Add-A-Fold Assemblies1.List valves by complete model number in order from left to right viewing the cylinder port 01 Red and 02 Black of the assembly. Consult individual valve specification sheet for complete model number.2.Include proper Add-A-Fold Assembly Kit number AAHHB**(this includes assembling the stack in the order listed with one Side Plate Kit). Place the number of stations in place of the asterisks such as: 2 Station Add-A-Fold – AAHHB02;4 Station Add-A-Fold –AAHHB04, etc.3.Any combination of single solenoid, double solenoid, single air operated or double air operated valves can be ordered in the Add-A-Fold assembly.Note: When valves are ordered separately on manifold bases,all necessary assembly and interface hardware is included.Side plate kits must be ordered separately.T wo Station Add-A-Fold (Customer to specify number of valves in assembly)HHB Series Valve Add-A-Fold AssemblyFeatures•One base accepts all HHB valves.•Any function can be changed at any time.•Valve and base can be added or removed at any time.•One pressure connection to one or more valves savestime, labor and material.•One common exhaust allows exhaust to be piped away;one muffler for several valves.•One electrical conduit connection to install.•All plumbing and wiring connections to manifold base.Any valve body can be removed without disturbing any other valve, plumbing or wiring.•Plug-in electrical connections are included on allmanifold bases.•Each base contains junction box with gasket, chainedcover, and ground screw.•Sandwich Pressure Regulator Kit, HHR1, can beapplied with new valves or installed in valves in the field.Regulators control pressure from manifold to valve inlet port.Add-A-Fold Side Plate Kit PS5419Each Add-A-Fold Side Plate Kit contains (2) hex head cap screws, (4) flat washers, (2) hex nuts, (1) side plate.A B C D E F GH inches 1.75 2.31 3.49 1.88 1.69 2.759.06.68mm 44598948437023017Add-A-Fold Assemblies & Side Plate KitOrdering InformationParker Hannifin Corporation 01 RED 02 BLK E P 01 RED02 BLK E PHHB200Subbase Mounted HHB208Manifold MountedApplicationThese valves are used to operate double acting cylinders.Valves are actuated by a maintained electrical signal.MountingThese valves are designed for end ported Add-A-Fold (manifold) base.OperationDe-energized position – 3-Way, normally open pilotpressurizes area between pistons. Pressure at inlet port P connected to outlet port 02. Outlet port 01 connected to exhaust port E.Energized position – Pilot exhausts area between pistons.Pressure at inlet port P connected to outlet port 01. Outlet port 02 connected to exhaust port E.ApplicationThese valves are used to operate double acting cylinders.Valves are actuated by a maintained electrical signal.MountingThese valves are designed for side ported subbase mounting.OperationDe-energized position – 3-Way, normally open pilotpressurizes area between pistons. Pressure at inlet port P connected to outlet port 02. Outlet port 01 connected to exhaust port E.Energized position – Pilot exhausts area between pistons.Pressure at inlet port P connected to outlet port 01. Outlet port 02 connected to exhaust port E.Model Selection InformationFor single pressure applications with internal pilot supply, 120V/60Hz.Port Size ValveModel Number1/2" NPTF Manifold Mounted HHB20850013/4" NPTFManifold MountedHHB2087501Valve Only (Includes Gaskets & Bolts)HHB20VXX01Model Selection InformationFor single pressure applications with internal pilot supply, 120V/60Hz.Port SizeValve/SubbaseModel Number3/8" NPTF Subbase Mounted HHB20037011/2" NPTF Subbase Mounted HHB20050013/4" NPTFSubbase MountedHHB2007501Valve Only (Includes Gaskets & Bolts)HHB20VXX015ApplicationThese valves are used to operate double acting cylinders.Valves are actuated by a momentary electrical signal alternating on each of the two solenoids.MountingThese valves are designed for side ported subbase mounting.OperationBlack solenoid energized – Pilot pressurizes area between pistons. Pressure at inlet port P connected to outlet port 02.Outlet port 01 connected to exhaust port E. Make-up bleed from outlet port 02 maintains system pressure in area between pistons.Red solenoid energized – Pilot exhausts area between pistons. Pressure at inlet port P connected to outlet port 01.Outlet port 02 connected to exhaust port E.ApplicationThese valves are used to operate double acting cylinders.Valves are actuated by a momentary electrical signal alternating on each of the two solenoids.MountingThese valves are designed for end ported Add-A-Fold (manifold) base.OperationBlack solenoid energized – Pilot pressurizes area between pistons. Pressure at inlet port P connected to outlet port 02.Outlet port 01 connected to exhaust port E. Make-up bleed from outlet port 02 maintains system pressure in area between pistons.Red solenoid energized – Pilot exhausts area between pistons. Pressure at inlet port P connected to outlet port 01.Outlet port 02 connected to exhaust port E.HHB400Subbase Mounted HHB408Manifold MountedModel Selection InformationFor single pressure applications with internal pilot supply, 120V/60Hz.Port Size Valve/SubbaseModel Number3/8" NPTF Subbase Mounted HHB40037011/2" NPTF Subbase Mounted HHB40050013/4" NPTFSubbase MountedHHB4007501Valve Only (Includes Gaskets & Bolts)HHB40VXX01Model Selection InformationFor single pressure applications with internal pilot supply, 120V/60Hz.Port SizeValveModel Number1/2" NPTF Manifold Mounted HHB40850013/4" NPTFManifold MountedHHB4087501Valve Only (Includes Gaskets & Bolts)HHB40VXX0101 0201 02ApplicationThese valves are used to operate double acting cylinders.Valves are actuated by a momentary electrical signal alternating on each of the two solenoids. The built-in sequence operator assures that the valve’s last shifted position is maintained even after a power down condition.MountingThese valves are designed for side ported subbase mounting.OperationBlack solenoid energized – Sequence spool shifted to pressurize area between pistons. Pressure at inlet port P connected to outlet port 02. Outlet port 01 connected to exhaust port E.Red solenoid energized – Sequence spool shifted to pressurize area between pistons. Pressure at inlet port P connected to outlet port 01. Outlet port 02 connected to exhaust port E.HHB490Subbase Mounted HHB498Manifold MountedApplicationThese valves are used to operate double acting cylinders.Valves are actuated by a momentary electrical signal alternating on each of the two solenoids. The built-in sequence operator assures that the valve’s last shifted position is maintained even after a power down condition.MountingThese valves are designed for end ported Add-A-Fold (manifold) base.OperationBlack solenoid energized – Sequence spool shifted to pressurize area between pistons. Pressure at inlet port P connected to outlet port 02. Outlet port 01 connected to exhaust port E.Red solenoid energized – Sequence spool shifted to pressurize area between pistons. Pressure at inlet port P connected to outlet port 01. Outlet port 02 connected to exhaust port E.Model Selection InformationFor single pressure applications with internal pilot supply, 120V/60Hz.Port SizeValve/SubbaseModel Number3/8" NPTF Subbase Mounted HHB49037011/2" NPTF Subbase Mounted HHB49050013/4" NPTFSubbase MountedHHB4907501Model Selection InformationFor single pressure applications with internal pilot supply, 120V/60Hz.Port SizeValveModel Number1/2" NPTF Manifold Mounted HHB49850013/4" NPTFManifold MountedHHB4957501HHB100Subbase Mounted HHB108Manifold MountedApplicationThese valves are used to operate double acting cylinders.Valves are actuated by a maintained pressure signal.MountingThese valves are designed for side ported subbase mounting.OperationNo Control Signal – piston area exhausted. Flow is P to 01 - 02 to E.Control Signal On – piston area pressurized. Flow is P to 02 - 01 to E.ApplicationThese valves are used to operate double acting cylinders.Valves are actuated by a maintained pressure signal.MountingThese valves are designed for end ported Add-A-Fold (manifold) base.OperationNo Control Signal – piston area exhausted. Flow is P to 01 - 02 to E.Control Signal On – piston area pressurized. Flow is P to 02 - 01 to E.0102 0102 Model Selection InformationPort SizeValveModel Number1/2" NPTF Manifold Mounted HHB108503/4" NPTFManifold MountedHHB10875Valve Only (Includes Gaskets & Bolts)HHB10VXXModel Selection InformationPort SizeValve/SubbaseModel Number3/8" NPTF Subbase Mounted HHB100371/2" NPTF Subbase Mounted HHB100503/4" NPTFSubbase MountedHHB10075Valve Only (Includes Gaskets & Bolts)HHB10VXXHHB190Subbase Mounted HHB198Manifold MountedApplicationThese valves are used to operate double acting cylinders.Valves are actuated by momentary pressure signals alternating on each of the two pilot ports. The built-in sequence operator assures that the valve’s last shifted position is maintained even after a power down condition.MountingThese valves are designed for side ported subbase mounting.OperationX 2 Pressurized – Sequence spool shifted to pressurize area between pistons. Pressure at inlet port P connected to outlet port 02. Outlet port 01 connected to exhaust port E.X 1 Pressurized – Sequence spool shifted to pressurize area between pistons. Pressure at inlet port P connected to outlet port 01. Outlet port 02 connected to exhaust port E.ApplicationThese valves are used to operate double acting cylinders.Valves are actuated by momentary pressure signals alternating on each of the two pilot ports. The built-in sequence operator assures that the valve’s last shifted position is maintained even after a power down condition.MountingThese valves are designed for end ported Add-A-Fold (manifold) base.OperationX 2 Pressurized – Sequence spool shifted to pressurize area between pistons. Pressure at inlet port P connected to outlet port 02. Outlet port 01 connected to exhaust port E.X 1 Pressurized – Sequence spool shifted to pressurize area between pistons. Pressure at inlet port P connected to outlet port 01. Outlet port 02 connected to exhaust port E.Model Selection InformationPort SizeValve/SubbaseModel Number3/8" NPTF Subbase Mounted HHB190371/2" NPTF Subbase Mounted HHB190503/4" NPTFSubbase MountedHHB19075Model Selection InformationPort SizeValveModel Number1/2" NPTF Manifold Mounted HHB198503/4" NPTFManifold MountedHHB19875MM HHB490HHB200 — HHB400Dimensions:A A1B B1B2B3C C1D D1E E1inches 2.94 3.16 6.567.827.789.037.699.25 2.19 1.40 6.508.50 mm75801681991982291952355636165216F F1G G1H H1J J1K K1L L1inches.41.25 1.91 2.31 3.19 3.49 1.79 1.88.75 1.75 1.50 2.75 mm10649598189454819443870 M N N1P Q R S Tinches.34 D 1.20.69 2.25.66 1.46 1.69 1.47M M HHB108HHB100Dimensions:A A 1B B 1B 2B 3C C 1D D 1E E 1inches 2.94 3.16 5.31 6.56 6.507.757.699.25 2.19 1.40 6.508.50mm 75801351671651971952355636165216F F 1G G 1H H 1J J 1K K 1L L 1inches .41.25 1.91 2.31 3.19 3.49 1.79 1.88.75 1.75 1.50 2.75mm 10649598189454819443870M N N 1P Q R S T inches .34 D 1.20.69 2.25.66 1.46 1.69 1.47Flow Rating (C v )2-Position:-37 (3/8)-50 (1/2)-75 (3/4)Subbase Mtd.C v * Average 4.5 5.1 5.3Free Flow – SCFM (dmn 3/sec)265 (125)350 (165)387 (182)Add-A-Fold Mtd.C v * Average NA 4.9 5.1Free Flow – SCFM (dmn 3/sec)NA300 (141)320 (150)* C v value is for sixth valve in a bank of six.Free Flow is measured at 100 PSIG (690 kPa) inlet.Options•Coil indicator lights.•Non-locking manual override.2-Position Double SolenoidAverage Fill Time: (Seconds)**With 100 PSIG supply, time required to fill from 0-90 PSIG andexhaust from 100 to 10 PSIG is measured from instant of energizing,or de-energizing 120V/60Hz. Times shown are average. Values for Add-A-Fold mounted valves are for the sixth valve in a bank of six.Operating PressureSingle & Double Solenoid And Single Air Pilot:35 to 150 PSIG (242 to 1035 kPa). Can also be used on low pressure or vacuum (HHB200 Only) with external pilot supply.Double Solenoid, Double Air PilotWith Sequence Operator:35 to 150 PSIG (242 to 1035 kPa). Can also be used on low pressure with external pilot supply.Temperature0°F to 140°F (-18°C to 71°C)Electrical Data: 120V/60Hz - 110V/50Hz7.2 Watts.26 Amp Inrush.14 Amp HoldingSingle Solenoid Valve:Has red wire leads.Double Solenoid Valve:Red leads in junction box to red solenoid, black leads to black solenoid.Valves meet U.L. & CSA Standards.Shipping Weight:Model Weight HHB 200 6.8 Lbs.HHB 2088.8 Lbs.HHB 4007.3 Lbs.HHB 4089.5 Lbs.HHB 4908.3 Lbs.HHB 49810.5 Lbs.LubricationHHB Series Valves suitable for non-lube service.2-Position Single SolenoidAverage Fill Time: (Seconds)**With 100 PSIG supply, time required to fill from 0-90 PSIG andexhaust from 100 to 10 PSIG is measured from instant of energizing,Coil SelectionVoltage Range +10/-15% of NominalTechnical DataTechnical InformationHHB200Subbase MountedSpecifications•Operating pressure range 30-125 PSI (207 to 863 kPa).•Flow:Free flow – 100 PSI inlet to valve.80 PSI reduced setting 115 SCFM.40 PSI reduced setting 90 SCFM.•Sandwich Regulator electrically plugs into bases andcontains electrical receptacle for valve body.•Regulated pressure gauge, 0-160 PSI, is provided.•Solenoid pilot supply from regulated side is standard.Shown with HHB200 Subbase Mounted ValveDimensions:AB C D inches7.80 1.68 5.37 3.037.50ApplicationThe HHR1 Sandwich type pressure regulator can be used on both HHB200 and HHB400 Series subbase and manifold mounted valves.OperationSandwich Regulator supplies regulated pressure to inlet of valve mounted on it.An increase of back pressure from the outlet ports above the set pressure will cause regulator to vent. Venting is into exhaust port of valve.How To OrderComplete Valve With Sandwich Regulator:**Insert desired port size 3/8"-37; 1/2"-50; 3/4"-75.Note: 3/8" not available in manifold base.Model numbers shown are for 120V/60Hz.Other voltages available.HHR1 SeriesSandwich Pressure Regulator。