听一个韩国整形翻译对中韩整形行业内幕的爆料

听一个韩国整形翻译对中韩整形行业内幕的爆料
听一个韩国整形翻译对中韩整形行业内幕的爆料

《听一个韩国整形翻译对中韩整形行业内幕的爆料》

如今中国整形市场,是越来越大,但是海量的广告让消费者乃至从业者,都无法分辨——

到底哪个医院好?到底哪个专家做的好?到底什么产品没有副作用,适合我的皮肤?我需不要去韩国看一看?那韩国的医院和医生又怎样?如何找适合的医院和医生?如何与医生深度沟通?网络上的帖子到底哪个是真实的?为什么中介报的低价格怎么去了医院见了院长价格就变了呢?

市场已经如此,往往只有圈内人才知道哪些医生的技术是真的好,哪些医生是真的有些包装过头,哪些医院的报价是真的水分过多……

帝雅涉足整形行业已经10年了,其中5年的赴韩整形翻译的经历让我更加深入地了解了这个行业。与同行相比,我作为整形咨询师和我的团队会花大量的时间去国内和韩国的整形医院的手术室泡很多天。

为什么泡手术室?

在手术室里我会真切地看到一些整形项目如何实现,同样的项目,在不同医生的手下竟然有天壤之别,也能最直观的认识到整形医师的手艺娴熟度究竟处于一个什么阶段。

我觉得,作为整容咨询师,要负责任地引导你的客户,对于每一个医院每一位医生都需要有深度的了解,对于客户的选择,你能给顾客提供什么性价比的整形美容服务。

我觉得我没有必要在这篇帖子里,给大家解疑什么双眼皮,丰胸,隆鼻等等这些热门项目,这些随便找一个人就可以了解到。但是这些同行有没有身临其境的泡过手术室,我就不得而知。不要单纯地相信某个医院和医生的名气,往往是花钱就可以弄到的。

在这里也提示下大家,大家在咨询的时候,请把自己的详细问题说明细一些,特别是需要修复的朋友,之前在哪里做的,做的什么项目,做了多久,现在是什么情况……越详细越好,这样方便我为你找医生的时候,心里有一个底也能第一时间让医生知道你的情况。对于一上来就问做个XX项目多少钱啊,哪个医生好啊?我觉得百度和其他同行会告诉你。

整形的价格,需要分几个部分聊。

1. 国内公立医院整形科:在这里在给大家普及下,同级别(医生的资质,主治,副主任,主任),还有年龄,一般是成正比的。级别越高,价格越高,年龄越大价格越高,当然过了55岁的医师尽量不要选了,55岁的医师视力和体力已经无法让医生做到巅峰的水平。当然特别年轻的医师也不要考虑,太容易被练手。行话就是练手。

2. 国内私立整形医院:设备会比公立医院好,价格相对高,服务会好一些,也有一批技术不错的海归派医生,在这里比较建议大家找韩国海归的医生们。

3. 韩国的整形医院:大家都有一个误区就是一味地觉得韩国价格高,那其实都是被整形医托加了很多提层。真正的韩国的价格是比国内私立的医院还要便宜的。

有个别几个特别有口碑的医院和医生以外价格都是差不多的。还有要强调的事千万不要到韩国狠砍价,资本主义社会比我们更懂得一分钱一分货的原则,所以别拿自己的脸当作逛菜市场。但是修复手术,韩国确实比国内贵一些,当然责任心也不一样,修复的效果也不一样。

对于那些以为地排斥韩国医院的,我只能说,韩国也有顶级医生,也有垃圾医生,只是比例上优于国内情况。

不要相信网络对话能见到医生什么的,医生忙于手术没时间在网上咨询,整形的项目,很多时候必须要和医生真人接触,才知道自己适合哪些,网络的信息太多太复杂,真真假假,谁也说不清。所以请大家保持一个理性的态度。

论整形手术的风险》

整形外科手术,自然会有风险,有的手术风险系数高,有的手术风险系数低,如双颚骨整形,颧骨整形的手术就相对风险高一些。

整形手术在公立做不等于就没有任何风险,相反咨询我的邮件里,就有大量在公立做失败了来求助我的。当然在私立做整形也有风险。最大的风险是什么?我个人觉得最大的风险——人的风险。

我一直打一个比喻,医生就像司机,司机有新司机和老司机。有天天开车闭着眼也能找到车感的司机,也有驾龄很长但是很少开车的司机。

医生一般都有国家认可的合法“驾照”,但是作为消费者我们很难知晓这位“司机”是新司机呢还是老司机,抑或是驾龄很长但是很久没开车的为老司机呢?

老司机开车,对车的性能非常熟悉,对于那种A照的司机,你让他开小车(做小手术)更是易如反掌

要说风险,人做的手术,自然有风险,要说不安全,你坐飞机,坐火车还有出事故的。

我们能做的,就是衡量一个项目的风险程度,考虑可能出现的风险,选择最熟练最靠谱的医师,最大程度降低风险率罢了。

对于赴韩整形再多唠叨几句,首先最佩服那些百度之后自己跑到韩国医院的美女们,不知存在多少隐患,做完手术才是真正问题的开始,没有中间协调人员,复杂的术后维护和术后沟通过程会成为很大的困难,包括术后恢复是需要过程的,每个过程的变化都会有让人担心的时候,那个时候该怎么办都是没有应急预案的。所以建议选择赴韩整形的美女们还是找个靠谱的合法翻译或咨询师比较好,以防万一手术后有不满意的部分,也可以及时弥补。

韩国的技术一直都是世界领先的,其实不仅是因为技术,韩国人的审美很好,再加上周到的服务,成为医疗观光最热门的国家。整容医院大大小小多有几千家,在国内被大家认知的那几家只不过是在中国大量砸钱做广告了而已,不一定做得有多么好。选择医院的时候一定要根据个人的需求找合适的医生。

我每个月往返韩国和北京多次,这是我的职业,要为自己的职业生涯踏踏实实一步一个脚印地积累,为了保证每一个客户的效果我和我的团队付出了很多心血,

相信口碑是最好的名片。

我希望通过我的努力,让每一个有需要的人,都能安心,放心,开心的拥有自己的美丽变化。我希望通过我的努力,真实了解医师的真实技术,根据大家真实要做的项目,进行私人定制。我希望通过我的努力,因为灾难留疤痕的人们或先天缺失想做整形的姑娘,帮助那些曾经失败需要做修复再造的人们找回自信和美丽。

每天学几句韩语 半年就可当翻译

每天学几句韩语半年就可当翻译 1.你好: 啊你啊塞哟 2.多多关照: 擦儿不大卡米大 3.谢谢: 卡目沙米大 4.对不起: 罪送哈米大 5.见到你很高兴: 满拉索盼嘎不是米大 6.再见,走好(主任对客人说的话): 安宁习, 卡色哟 7.再见,走好(客人对主任说的话): 安宁习, 给色哟 8.我爱你: 萨郎黑哟9.喜欢: 做啊黑哟 10.吃好啊: 吗习给多色哟11.我吃饱了: 别不儿罗哟 12.肚子饿了: 过怕哟13:我联系你: 眼儿拉卡儿给哟 14.晚安: 安宁习, 租目塞哟15.生日快乐: 生一儿, 粗卡哈米大 16.加油: 啊杂,啊杂,华一艇(A ZA A ZA FIGHTING) 17.哥哥, 我喜欢你: 哦爸, 萨郎黑哟18.请帮我: 多哇住塞哟 19.我叫...: 错能... 20.我是中国人: 错能, 总谷沙拉米米打

词语 1.知道: 啊拉嗦 2.开始: 洗嫁 3.勇气: 庸gi(第三个声) 4.王的男人: 枉gie腩人 5.真是的: 啊西 6.你先说: on这巴爹哟 7.他们: kei du(第三声) 8.没有(不是): 啊你哦 9.你是谁?: 怕你衣死尬? 10.你疯了: u捉索 11.但是: 肯爹12.奇怪: 衣索念 13.什么: 爹? 14.是: 爹

家庭 1.父亲: 啊波几 2.母亲: 啊莫你 3.祖父: 哈拉波几 4.祖母: 哈日莫你 5.叔叔: 身ten(第三声) 6.阿姨: E莫 7.女儿: 呆儿8.儿子: 啊得儿 9.哥哥: 轰您(第三声) 10.弟弟: 男东先 11.姐姐: on你12.妹妹: 哟东先 13.侄子: 左(第一声)卡14.妻儿: 不(第一声)印15.丈夫: 男骗儿16.孙子: 孙杂 17.孙女: 孙女哟18.岳父: 汤引 19岳母: 汤莫20.婴儿: 哟啊 21.男士: 男杂22.女士: 哟杂 23.朋友: 亲古24.同事: 东木 25.搭档: 滩杂26.邻居: 衣屋 27.孩子: 啊义28.青年: 称你恩 29.成年: 孙你恩30.夫人: 不(第一声)印 31.新郎: 新囊(第四声) 32.新娘: 新补

冲压模具技术外文翻译(含外文文献)

前言 在目前激烈的市场竞争中,产品投入市场的迟早往往是成败的关键。模具是高质量、高效率的产品生产工具,模具开发周期占整个产品开发周期的主要部分。因此客户对模具开发周期要求越来越短,不少客户把模具的交货期放在第一位置,然后才是质量和价格。因此,如何在保证质量、控制成本的前提下加工模具是值得认真考虑的问题。模具加工工艺是一项先进的制造工艺,已成为重要发展方向,在航空航天、汽车、机械等各行业得到越来越广泛的应用。模具加工技术,可以提高制造业的综合效益和竞争力。研究和建立模具工艺数据库,为生产企业提供迫切需要的高速切削加工数据,对推广高速切削加工技术具有非常重要的意义。本文的主要目标就是构建一个冲压模具工艺过程,将模具制造企业在实际生产中结合刀具、工件、机床与企业自身的实际情况积累得高速切削加工实例、工艺参数和经验等数据有选择地存储到高速切削数据库中,不但可以节省大量的人力、物力、财力,而且可以指导高速加工生产实践,达到提高加工效率,降低刀具费用,获得更高的经济效益。 1.冲压的概念、特点及应用 冲压是利用安装在冲压设备(主要是压力机)上的模具对材料施加压力,使其产生分离或塑性变形,从而获得所需零件(俗称冲压或冲压件)的一种压力加工方法。冲压通常是在常温下对材料进行冷变形加工,且主要采用板料来加工成所需零件,所以也叫冷冲压或板料冲压。冲压是材料压力加工或塑性加工的主要方法之一,隶属于材料成型工程术。 冲压所使用的模具称为冲压模具,简称冲模。冲模是将材料(金属或非金属)批量加工成所需冲件的专用工具。冲模在冲压中至关重要,没有符合要求的冲模,批量冲压生产就难以进行;没有先进的冲模,先进的冲压工艺就无法实现。冲压工艺与模具、冲压设备和冲压材料构成冲压加工的三要素,只有它们相互结合才能得出冲压件。 与机械加工及塑性加工的其它方法相比,冲压加工无论在技术方面还是经济方面都具有许多独特的优点,主要表现如下; (1) 冲压加工的生产效率高,且操作方便,易于实现机械化与自动化。这是

标准韩国语2课文翻译

第1课紫禁城 (1) 陈文殊:你去过紫禁城吗? 朴智英:没,还没去过呢.但在照片和电影里看过几次. 陈文殊:一定要去次啊. 朴智英:紫禁城是哪个时代的王宫呢? 陈文殊:是明清2代的王宫.现在一部分是博物馆用于绘画,陶瓷等的展示.(2) (在紫禁城) 朴智英:这幢建筑真是雄壮啊.是什么地方啊? 陈文殊:这幢紫禁城最雄壮的建筑叫太和殿.是皇帝登基大典和国家主要活动的地方. 朴智英:好象很悠久了啊.是什么时候建造的呢? 陈文殊:1406年之1420年建造的. 朴智英:建筑里面可以进去吗? 陈文殊:当然可以.进去看看吧. (走进太和殿) 朴智英:在这里照张像吧. 陈文殊:建筑里面不准照相.去外面拍吧. 第2课预订 (1) 职员:你好.大韩航空. 洪丹:本月15号去济州岛的飞机票可以预订吗? 职员:下午的票已经买完了,只有上午的了. 洪丹:都有几点票呢? 职员:有早上8点,9点,10点的票. 洪丹:那么,请给预订10点的票吧. 职员:回来时打算怎么办呢?购买往返票的话,会便宜一些哦. 洪丹:那么,请给预订17日下午5点左右的吧.可是,要怎么购买飞机票呢?职员:15日早点来机场购买,或者,那之前去旅行社,航空社买都可以.(2) 职员:谢谢.济州新罗饭店. 洪丹:我想预订下周星期六,星期天两天住的房间. 职员:想要几个人住的房间呢? 洪丹:我一个人住的. 职员:请说下姓名,住所. 洪丹:名字是洪丹,住所在汉城市钟路区贯铁洞12-15号. 职员:预订好了. 洪丹:因为想看大海,可能的话,请给预订窗临大海的房间. 第3课将来计划 一.课文 (1) 洪丹:晶喜,你小时候的梦想是什么啊?

标准韩国语第1册课文翻译

第13课1. 你好?我是王丹。 你好?我是李世民。 李世民先生是韩国人吗? 是的,韩国人。王丹是中国人吗? 是的,我是中国人。 2. 你好?许正姬 你好?陈文洙。陈文洙先生是学生吗? 我是汉城大学学生。专业是韩国历史。 3. 你好?我是金永浩 你好?我是王龙,很高兴见到你。 金永浩先生是学生吗? 不是。我在公司上班。王龙先生是学生吗?是的,我是大学生。 第14课1. 你好,王丹 你好,洪丹。去哪里? 去学校。 那么和我一起去吧 2. 陈文洙先生,最近忙什么? 学习韩国语。 在哪里学韩国语?

在汉城大学语言学研究所学习韩国语。 3. 请读 请写 请认真听 请跟着做 请提问 请回答 请看黑板 知道了吗? 有问题吗? 第15课1. 王龙先生,昨天做了什么? 在家读书了。李世民先生做了什么? 我见了朋友。 见谁了? 见了朴民洙先生 和朴民洙先生做了什么? 看了电影。然后聊天了。 2. 洪丹,昨天去了景福宫和博物馆吗? 去了景福宫。但是没能去博物馆。 为什么没能去博物馆? 没有时间。金智英做了什么? 我在家打扫了卫生。然后稍微休息了。

第16课 买东西 1. 快请进。 有面包和牛奶吗? 是的,有 要两块面包和一瓶牛奶。 在这里, 多少钱? 950元。 2. 大叔,这苹果多少钱? 500元。 那苹果多少钱? 那个是800元。 要那个苹果5个。 4000元。 给您钱。 慢走。请再来。 再见。 第17课 一天的工作 1. 王丹早晨6点起床。先做晨练。然后洗脸。8点吃饭。8点半去学校。9点到下午1点学习韩国语。1点半和朋友们一起吃饭。下午和韩国朋友一起去图书馆。

韩国语教程5 课文翻译

?41?????? 1周岁宴 桌子上首先要放上糕点、水果,此外还有许多不可缺少的东西 精心的做了准备,还忘了什么吗?这里放了线和面条 那是表示长命百岁的,还应该放上表示发财的大米和钱 哎呀!突然一下子忘了放钱了 如果一切就绪了,就把孩子带来坐下,穿的那样整齐看起来挺文雅嘛 不用坐下站着吧。吃的东西这么多,大家都还看着他,好像很神气 长得像他父亲,个也高,很有男子汉的样子。来,看先抓什么?抓面条吧 哎呀,先抓糕点吃。对了对了,想好好念书,也抓书了 2聘礼 来,现在看上聘礼,挺有意思的,新媳妇向公婆敬茶了,这是大礼节 然而为什么不让新媳妇一人独自行礼,还要有人搀扶着 那是因为行那种礼的对象不仅是公婆,而是婆家的所有长辈,很累的,所以旁边要有人搀扶 我对这些原来都不知道,公婆表现出很满意的样子,那张桌子上放的饮食都是什么 是说那色彩斑斓的鸡和用线一一串起来的红枣吗?那是新媳妇作为聘礼送给公婆的 哎呀你看,那位当了婆婆的人向新媳妇扔红枣呢 是呀,那意思是根据落在她身体上红枣的数量决定她会多子多孙,一生幸福 是吗?按红枣的数量,哈哈,那岂不是太多了 3花甲宴 朴仁浩先生你属什么? 比我小三岁,甲戍、乙亥、丙子,丙子年生,属鼠 看的二人坐在那里享受花甲宴,真让人羡慕 那里敬酒的儿子儿媳是老幺。好像在釜山经营着大公司 那么说,是三个儿子两个女儿了。儿女都已成材,真有福气啊 夫妻白头偕老,财富之上,更有子女福……真的多福多寿啊

是啊,花甲老人那样健壮矍铄,长寿之相啊 听说这次宴会结束几天后就要去旅行,儿子和女儿拿钱,让两位老人去济州岛观光 4吊丧 今天早上我接到朋友父亲去世的讣告,想去吊唁应该如何办 接到讣告当然应该去吊唁 如何去吊唁,请多指教 到丧家后,先要焚香,行大礼,祈祷故人冥福。而且要向站立在旁的丧家行礼致意 在丧家说什么话致意呢 应该说多么令人悲痛啊,但往往是话未说完就泣不成声了 这是韩国式的致意啊 而且都要送上丧仪,以补丧礼费用之需。另外如果关系特别好,还要陪同丧家守灵,以分担丧家之悲痛 5婚礼 人生中最美丽的回忆可以说是婚礼,婚礼对于任何人来说都是美丽的重要的。因此有许多必须遵守的繁文缛节。而韩国的婚俗中,甚至包括了某些搞笑的内容,下面看一下韩国的婚俗 在古代,七岁便有男女不同席之说,故无从说到恋爱结婚之事。一般都是媒人从中说合,双方父母了解对方的家庭、人品等情况后,定下婚事。在定下婚事之后,新郎家便将写有生年月日和时辰的生辰八字送至新妇家。接到生辰八字的新妇家提出婚期,再告知新郎家,互相同意后,便约定婚期。定准婚期后,新妇家便做结婚准备。出嫁时自己要穿的衣服,用的物品,向公婆和亲戚赠送的礼品,等等,都要精心购买、准备。 婚礼的前一天是送箱笼之日,新郎家要将装着准备好的红绿色绸缎衣料、礼品和婚书的箱笼送到新妇家。箱笼是由亲戚抬到新妇家的,此时,青纱灯笼引路,亲戚们在进入新妇家所在的村庄后,便一边走一边喊买箱笼呵!于是新妇家或许担心箱笼被送到别人家,便要喊我们买!抬箱笼的大伯们盛气凌人地故意卖关子,摆出不出高价就不卖的讨价还价姿态。当然,最后他们以未能取胜的样子进到新妇家,新妇家因得到箱笼而大喜,以酒招待之。 婚礼时新郎乘马到新妇家,戴着纱帽、穿着官服的新郎同戴着首饰、穿着圆领衫的新妇互相行礼,从而婚礼开始。此时,新郎才一睹新妇芳容。而且新郎将带来的一对大雁置于

机械类外文文献

附:外文翻译 外文原文: Fundamentals of Mechanical Design Mechanical design means the design of things and systems of a mechanical nature—machines, products, structures, devices, and instruments. For the most part mechanical design utilizes mathematics, the materials sciences, and the engineering-mechanics sciences. The total design process is of interest to us. How does it begin? Does the engineer simply sit down at his desk with a blank sheet of paper? And, as he jots down some ideas, what happens next? What factors influence or control the decisions which have to be made? Finally, then, how does this design process end? Sometimes, but not always, design begins when an engineer recognizes a need and decides to do something about it. Recognition of the need and phrasing it in so many words often constitute a highly creative act because the need may be only a vague discontent, a feeling of uneasiness, of a sensing that something is not right. The need is usually not evident at all. For example, the need to do something about a food-packaging machine may be indicated by the noise level, by the variations in package weight, and by slight but perceptible variations in the quality of the packaging or wrap. There is a distinct difference between the statement of the need and the identification of the problem. Which follows this statement? The problem is more specific. If the need is for cleaner air, the problem might be that of reducing the dust discharge from power-plant stacks, or reducing the quantity of irritants from automotive exhausts. Definition of the problem must include all the specifications for the thing that is to be designed. The specifications are the input and output quantities, the characteristics of the space the thing must occupy and all the limitations on t hese quantities. We can regard the thing to be designed as something in a black box. In this case we must specify the inputs and outputs of the box together with their characteristics and limitations. The specifications define the cost, the number to be manufactured, the expected life, the range, the operating temperature, and the reliability. There are many implied specifications which result either from the designer's particular environment or from the nature of the problem itself. The manufacturing processes which are available, together with the facilities of a certain plant, constitute restrictions on a designer's freedom, and hence are a part of the implied specifications. A small plant, for instance, may not own cold-working machinery. Knowing this, the designer selects other metal-processing methods which can be performed in the plant. The labor skills available and the competitive situation also constitute implied specifications. After the problem has been defined and a set of written and implied specifications has been obtained, the next step in design is the synthesis of an optimum solution. Now synthesis cannot take place without both analysis and optimization because the system under design must be analyzed to determine whether the performance complies with the specifications. The design is an iterative process in which we proceed through several steps, evaluate the results, and then return to an earlier phase of the procedure. Thus we may synthesize several components of a system, analyze and optimize them, and return to synthesis to see what effect this has on the remaining parts of the system. Both analysis and optimization require that we construct or devise abstract models of the system which will admit some form of mathematical analysis. We call these models

第二册韩国语翻译

第二册韩国语翻译 第二册 第1课紫禁城 (1) 陈文殊:你去过紫禁城吗? 朴智英:没,还没去过呢.但在照片和电影里看过几次. 陈文殊:一定要去次啊. 朴智英:紫禁城是哪个时代的王宫呢? 陈文殊:是明清2代的王宫.现在一部分是博物馆用于绘画,陶瓷等的展示. (2) (在紫禁城) 朴智英:这幢建筑真是雄壮啊.是什么地方啊?

陈文殊:这幢紫禁城最雄壮的建筑叫太和殿.是皇帝登基大典和国家主要活动的地方. 朴智英:好象很悠久了啊.是什么时候建造的呢? 陈文殊:1406年之1420年建造的. 朴智英:建筑里面可以进去吗? 陈文殊:当然可以.进去看看吧. (走进太和殿) 朴智英:在这里照张像吧. 陈文殊:建筑里面不准照相.去外面拍吧. 第2课预订 (1) 职员:你好.大韩航空. 洪丹:本月15号去济州岛的飞机票可以预订吗? 职员:下午的票已经买完了,只有上午的了. 洪丹:都有几点票呢? 职员:有早上8点,9点,10点的票. 洪丹:那么,请给预订10点的票吧. 职员:回来时打算怎么办呢?购买往返票的话,会便宜一些哦. 洪丹:那么,请给预订17日下午5点左右的吧.可是,要怎么购买

飞机票呢? 职员:15日早点来机场购买,或者,那之前去旅行社,航空社买都可以. (2) 职员:谢谢.济州新罗饭店. 洪丹:我想预订下周星期六,星期天两天住的房间. 职员:想要几个人住的房间呢? 洪丹:我一个人住的. 职员:请说下姓名,住所. 洪丹:名字是洪丹,住所在汉城市钟路区贯铁洞12-15号. 职员:预订好了. 洪丹:因为想看大海,可能的话,请给预订窗临大海的房间. 第3课将来计划 一.课文 (1) 洪丹:晶喜,你小时候的梦想是什么啊?

Manufacturing Engineering and Technology(机械类英文文献+翻译)

Manufacturing Engineering and Technology—Machining Serope kalpakjian;Steven R.Schmid 机械工业出版社2004年3月第1版 20.9 MACHINABILITY The machinability of a material usually defined in terms of four factors: 1、Surface finish and integrity of the machined part; 2、Tool life obtained; 3、Force and power requirements; 4、Chip control. Thus, good machinability good surface finish and integrity, long tool life, and low force And power requirements. As for chip control, long and thin (stringy) cured chips, if not broken up, can severely interfere with the cutting operation by becoming entangled in the cutting zone. Because of the complex nature of cutting operations, it is difficult to establish relationships that quantitatively define the machinability of a material. In manufacturing plants, tool life and surface roughness are generally considered to be the most important factors in machinability. Although not used much any more, approximate machinability ratings are available in the example below. 20.9.1 Machinability Of Steels Because steels are among the most important engineering materials (as noted in Chapter 5), their machinability has been studied extensively. The machinability of steels has been mainly improved by adding lead and sulfur to obtain so-called free-machining steels. Resulfurized and Rephosphorized steels. Sulfur in steels forms manganese sulfide inclusions (second-phase particles), which act as stress raisers in the primary shear zone. As a result, the chips produced break up easily and are small; this improves machinability. The size, shape, distribution, and concentration of these inclusions significantly influence machinability. Elements such as tellurium and selenium, which are both chemically similar to sulfur, act as inclusion modifiers in

标准韩国语第一册全部课文翻译

标准韩国语第一册课文翻译 第13课 1. 你好?我是王丹。 你好?我是李世民。 李世民先生是韩国人吗? 是的,韩国人。王丹是中国人吗? 是的,我是中国人。 2. 你好?许正姬 你好?陈文洙。陈文洙先生是学生吗? 我是汉城大学学生。专业是韩国历史。 3. 你好?我是金永浩 你好?我是王龙,很高兴见到你。 金永浩先生是学生吗? 不是。我在公司上班。王龙先生是学生吗? 是的,我是大学生。 第14课 1. 你好,王丹 你好,洪丹。去哪里? 去学校。 那么和我一起去吧 2. 陈文洙先生,最近忙什么? 学习韩国语。 在哪里学韩国语? 在汉城大学语言学研究所学习韩国语。 3. 请读 请写 请认真听 请跟着做 请提问 请回答 请看黑板 知道了吗? 有问题吗? 第15课 1.

王龙先生,昨天做了什么? 在家读书了。李世民先生做了什么? 我见了朋友。 见谁了? 见了朴民洙先生 和朴民洙先生做了什么? 看了电影。然后聊天了。 2. 洪丹,昨天去了景福宫和博物馆吗? 去了景福宫。但是没能去博物馆。 为什么没能去博物馆? 没有时间。金智英做了什么? 我在家打扫了卫生。然后稍微休息了。 第16课 买东西 1. 快请进。 有面包和牛奶吗? 是的,有 要两块面包和一瓶牛奶。 在这里, 多少钱? 950元。 2. 大叔,这苹果多少钱? 500元。 那苹果多少钱? 那个是800元。 要那个苹果5个。 4000元。 给您钱。 慢走。请再来。 再见。 第17课 一天的工作 1. 王丹早晨6点起床。先做晨练。然后洗脸。8点吃饭。8点半去学校。9点到下午1点学习韩国语。1点半和朋友们一起吃饭。下午和韩国朋友一起去图书馆。在图书馆认真学习。一般晚上6点左右回到寄宿房。晚上给朋友们写信。然后听音乐。11点睡觉。

韩国语教程4第一课翻译

第一段:???? ????? 1.????:(比喻)使理解起来更容易,而用和它有相似性质或模样的其他事物来表现。 用比喻来说,比喻法 用蚂蚁来比喻努力做事的人。 2.???????:(转眼间)用眼睛睁一次闭一次那么短的时间来说明变化的发生。 转眼就消失了。转眼间 刚才一转眼钱包就不见了。 3.??:(悬挂)使物品贴在某个地方不掉下来。 吊,挂;挂着 爸爸亲手把掉了的纽扣缝上。 4.??:(呼呼)翅膀大大的张开慢慢飞动的模样,或是火苗猛烈燃烧的样子。堆积的事情做完后心情很畅快。 5.??? ??:(沉浸在幸福里)像泡在水里那样很深的浸在幸福的感情中,想不到不幸。 正沉浸在幸福中;饱含悲伤的眼睛 全世界的人都经常处于幸福该有多好。 6.-??

??:在动词后面,表示前文的内容是后文的补充,或表示前文的内容和后文对立。 有乱扔垃圾的人,也有捡起来的人。 今天下雨,也出了太阳。 世界上有好人也有坏人。 他既夸耀自己也责备自己没有能力。 那个人又有能力人际关系又好,在公司得到很多人气。 7.????:(焦急)表现因为紧急或是没有时间而紧张等待的心情。焦急的心情;焦急的等待 在手术室外有因为等待结果而急得走来走去的家人。 8.-???? ??:在引用文‘-???’后面加上复数结尾词‘-?’,表示一般性,很多人这样说。 都说这次入学考试很简单。 都说是让子女接受早期外语教育的父母增多了呢。 一般对双职工夫妻来说家务事都是负担。 说是利用假期去外国进行背囊旅行的大学生增多了。 都吵着要借着连休去野外,我们也去哪里走走吧。 9.?????:(变化无常)人的性格或是天气等一会这样一会那样,经常变化的性质。 善变的人;变化得厉害 最近天气善变,准备把雨伞经常带着吧。

机械类毕业设计外文文献翻译

沈阳工业大学工程学院 毕业设计(论文)外文翻译 毕业设计(论文)题目:工具盒盖注塑模具设计 外文题目:Friction , Lubrication of Bearing 译文题目:轴承的摩擦与润滑 系(部):机械系 专业班级:机械设计制造及其自动化0801 学生姓名:王宝帅 指导教师:魏晓波 2010年10 月15 日

外文文献原文: Friction , Lubrication of Bearing In many of the problem thus far , the student has been asked to disregard or neglect friction . Actually , friction is present to some degree whenever two parts are in contact and move on each other. The term friction refers to the resistance of two or more parts to movement. Friction is harmful or valuable depending upon where it occurs. friction is necessary for fastening devices such as screws and rivets which depend upon friction to hold the fastener and the parts together. Belt drivers, brakes, and tires are additional applications where friction is necessary. The friction of moving parts in a machine is harmful because it reduces the mechanical advantage of the device. The heat produced by friction is lost energy because no work takes place. Also , greater power is required to overcome the increased friction. Heat is destructive in that it causes expansion. Expansion may cause a bearing or sliding surface to fit tighter. If a great enough pressure builds up because made from low temperature materials may melt. There are three types of friction which must be overcome in moving parts: (1)starting, (2)sliding, and(3)rolling. Starting friction is the friction between two solids that tend to resist movement. When two parts are at a state of rest, the surface irregularities of both parts tend to interlock and form a wedging action. To produce motion in these parts, the wedge-shaped peaks and valleys of the stationary surfaces must be made to slide out and over each other. The rougher the two surfaces, the greater is starting friction resulting from their movement . Since there is usually no fixed pattern between the peaks and valleys of two mating parts, the irregularities do not interlock once the parts are in motion but slide over each other. The friction of the two surfaces is known as sliding friction. As shown in figure ,starting friction is always greater than sliding friction . Rolling friction occurs when roller devces are subjected to tremendous stress which cause the parts to change shape or deform. Under these conditions, the material in front of a roller tends to pile up and forces the object to roll slightly uphill. This changing of shape , known as deformation, causes a movement of molecules. As a result ,heat is produced from the added energy required to keep the parts turning and overcome friction. The friction caused by the wedging action of surface irregularities can be overcome

机械类英文文献+翻译)

机械工业出版社2004年3月第1版 20.9 MACHINABILITY The machinability of a material usually defined in terms of four factors: 1、Surface finish and integrity of the machined part; 2、Tool life obtained; 3、Force and power requirements; 4、Chip control. Thus, good machinability good surface finish and integrity, long tool life, and low force And power requirements. As for chip control, long and thin (stringy) cured chips, if not broken up, can severely interfere with the cutting operation by becoming entangled in the cutting zone. Because of the complex nature of cutting operations, it is difficult to establish relationships that quantitatively define the machinability of a material. In manufacturing plants, tool life and surface roughness are generally considered to be the most important factors in machinability. Although not used much any more, approximate machinability ratings are available in the example below. 20.9.1 Machinability Of Steels Because steels are among the most important engineering materials (as noted in Chapter 5), their machinability has been studied extensively. The machinability of steels has been mainly improved by adding lead and sulfur to obtain so-called free-machining steels. Resulfurized and Rephosphorized steels. Sulfur in steels forms manganese sulfide inclusions (second-phase particles), which act as stress raisers in the primary shear zone. As a result, the chips produced break up easily and are small; this improves machinability. The size, shape, distribution, and concentration of these inclusions significantly influence machinability. Elements such as tellurium and selenium, which are both chemically similar to sulfur, act as inclusion modifiers in resulfurized steels. Phosphorus in steels has two major effects. It strengthens the ferrite, causing

机械专业外文文献翻译

翻译部分 英文原文 High-speed machining and demand for the development of High-speed machining is contemporary advanced manufacturing technology an important component of the high-efficiency, High-precision and high surface quality, and other features. This article presents the technical definition of the current state of development of China's application fields and the demand situation. High-speed machining is oriented to the 21st century a new high-tech, high-efficiency, High-precision and high surface quality as a basic feature, in the automobile industry, aerospace, Die Manufacturing and instrumentation industries gained increasingly widespread application, and has made significant technical and economic benefits. contemporary advanced manufacturing technology an important component part. HSC is to achieve high efficiency of the core technology manufacturers, intensive processes and equipment packaged so that it has a high production efficiency. It can be said that the high-speed machining is an increase in the quantity of equipment significantly improve processing efficiency essential to the technology. High-speed machining is the major advantages : improve production efficiency, improve accuracy and reduce the processing of cutting resistance. The high-speed machining of meaning, at present there is no uniform understanding, there are generally several points as follows : high cutting speed. usually faster than that of their normal cutting 5 -10 times; machine tool spindle speed high, generally spindle speed in -20000r/min above 10,000 for high-speed cutting; Feed at high velocity, usually 15 -50m/min up to 90m/min; For different cutting materials and the wiring used the tool material, high-speed cutting the meaning is not necessarily the same; Cutting process, bladed through frequency (Tooth Passing Frequency) closer to the "machine-tool - Workpiece "system the dominant natural frequency (Dominant Natural Frequency), can be considered to be high-speed cutting. Visibility high-speed machining is a comprehensive concept. 1992. Germany, the Darmstadt University of Technology, Professor H. Schulz in the 52th on the increase of high-speed cutting for the concept and the scope, as shown in Figure 1. Think different cutting targets, shown in the figure of the transition area (Transition), to be what is commonly called the high-speed cutting, This is also the time of metal cutting process related to the technical staff are looking forward to, or is expected to achieve the cutting speed. High-speed machining of machine tools, knives and cutting process, and other aspects specific requirements. Several were from the following aspects : high-speed machining technology development status and trends.

相关文档
最新文档