阀门术语英汉对照表

阀门术语英汉对照表-转

行业分析 2010-10-14 10:00:09 阅读29 评论0 字号：大中小订阅

https://www.360docs.net/doc/4213468930.html,/blog/gyfxzk/article/b0-i10019283.html

阀门术语英汉对照表

阀门常用法定计量单位换算表

阀门材质材料英汉术语词典

阀门材质-钢铁材料

copper 合金

cast steel 铸钢

Steel Casting iron 碳素钢铸件

Fine Steel Casting iron 优质碳素钢

Stainless steel 不锈钢

Stainless acid-resisting steel 不锈耐酸钢

Chromium-molybdenum steel 铬钼钢

Chrominm-molybdenum-vanadium steel 铬钼钒钢

Spring steel 弹簧钢

Chromium stainless steel 铬不锈钢

Gray Cast iron 灰铸铁

nodular cast iron 球墨铸铁

Ductile Cast iron 球墨铸铁

Chromel alloy 镍铬合金

Hayne's alloy 钴铬钨合金

High tem perature steel 高温钢

Low tem perature steel 低温钢

Monel 蒙乃尔合金

bar 棒材

billet 方钢，钢方坯

bloom 钢坯,钢锭

section 型材

steel ingot 钢锭

阀门材质-有色金属材料

bronze 青铜

brass 黄铜

Pure cupper 纯铜

Cuprum alloy 铜合金

Casting aluminium brass 铸铝黄铜Casting aluminium bronze 铸铝青铜Pure aluminum 纯铝

阀门材质-塑料材料

Nylon 尼龙塑料Polytetrafluoroethylene 聚四氟乙烯阀门材质-橡胶材料

CHR rubber 氯晴橡胶

Buna-N rubber 丁晴橡胶

Rubbeer graphite board 橡胶石墨板Fluorous rubber 氟橡胶

阀门材质-其他材料

Expanded graphite 柔性石墨Stainless and Graphite 不锈钢/石墨stock 原料

Ceramic metal 陶瓷金属

阀门产品种类术语-valve英汉互译词典阀门 valve

通用阀门 General valve

球阀 Ball valve

槽车球阀 Tank Lorry Ball Valves CQ螺纹球阀 CQ Thread Ball Valves

法兰球阀 Flange Ball Valves

衬里球阀 Lining Ball Valves

闸阀 Gate valve

楔式闸阀 Wedge Gate Valves

法兰闸阀 Flange Gate Valves

排渣闸阀 Scum Gate Valves

薄型闸阀 Thin Gate Valves

水封闸阀 Water Seal Gate Valves

电动楔式闸阀 Electric Actuated Wedge Gate Valves

平板闸阀 Flat Gate Valve

单闸板平板闸阀 Single Disc Flat Gate Valves

Electric Double Disk Parallel Gate Valves电动平行式双闸板闸阀Double Disc Flat Gate Valves 双闸板平板闸阀

Double Disk Parallel Gate Valves明杆平行式双闸板闸阀

截止阀 Globe valve

Angle Globe valves 角式截止阀

Angle Type Globe Valves 门角式截止阀

Electric Actuated Stop Valves 电动截止阀

Flange Globe Valves 法兰截止阀

Lining Globe Valves 衬里截止阀

Oblique Stop Valves 直流式截止阀

Plunger Globe Valves 柱塞截止阀

Magnetic Co-operate Globe Valves磁耦合截止阀

止回阀 Check valve

旋启式止回阀 Swing Check Valves

对夹式止回阀 Wafer Check Valves

蝶式缓冲止回阀 Butterfly Type Non-slam Check

升降式止回阀 Lift Check Valves

衬里止回阀 Lining Check Valves

微阻缓闭止回阀 Tiny Drag Slow Shut Check Valves

立式止回阀 Vertical Lift Check Valves

蝶阀 Butterfly Valve

对夹蝶板阀 Wafer plate valves

衬里碟阀 Lining Butterfly Valves

蜗轮传动蝶阀 Butterfly Valves with Gear Actuator

Wafer Type Butterfly Valves with Rubber Itning对夹式衬胶蝶阀

调节阀 Control Valve

电站阀 Power Station Valve

High Temperature Pressure Power Station Gate Valves 高温高压电站闸阀

High Temperature Pressure Power Station Globe Valves 高温高压电站截止阀

节流阀 Throttle valve

Angle Throttle Valves 角式节流阀

隔膜阀 diaphragm valve

旋塞阀 plug valve

安全阀 safety valve

管道安全阀 Piping Safety Valves

回转阀 rotary valve

减压阀 pressure reducing valve

减速阀 Deceleration valves

泄压阀 Decompression valves

蒸汽疏水阀 Automatic steam trap valve

组合阀 Combination valves

气动阀门 pneumatic valve

气动阀 pneumatic valves

气动件 Pneumatic component

脚踏阀 foot operated valve

气动气管 pneumatic gas tube

气动手指 pneumatic finger

流量控制阀 flow control valve

机械阀 mechanical valve

针形阀 Pintle valve

仪表阀 Gauge Valves

仪表针形截止阀 Meter Needle Type Globe Valves 空气阀门 Air valves

Ash valves 排灰阀

Aspirating valves 吸（抽）气阀

Auxiliary valves 辅助（副）阀

Balance valves 平衡阀

Bellows valves 波纹管阀

Blowdown valves 泄料（放空，排污）阀

Brake valves 制动阀

Buttwelding valves 对焊连接阀

Cock 二通

气动元件 pneumatic components

气源处理器 air treatment

执行元件 execute component

控制元件 control component

辅助元件 auxiliary component

气缸 cylinders

标准气缸 standard cylinders

薄型气缸 compact cylinder

气动接头 tube connector

气动件 pneumatic element

PU管 PU tube

Culvert valves 地下管道阀

Double Opening Exhaust Valves 双口排气球Drainage valves 排水阀

Emergeny Cut-off Valves 紧急切断阀

Exhaust valves 排气阀

Free Float Type Steam Trap 浮球式疏水阀Hand-operated valves 手动阀

Hard Seal Butterfly Valves 金属密封碟阀Hydraulic relay valves 液压继动阀

Limit valves 限位阀

Lining Cock 衬里二通

Lining T-Cock Valves 衬里三通旋塞阀

Liquid Indicator 液位计

LPG Pipe Fitting 液化气管件

Manual Oil Pumps Valves 手摇油泵阀Parallel Slide Valves 浆液阀

Plunger valves 柱塞阀

Pressure valve 压力（増压）阀

Quick Draining Valves 快速排污阀Restrictor Valves 过流阀(或节流阀)

电磁阀 Solenoid valve

Solenoid valves 电磁阀

Single Opening Exhaust Valves 单口排气球Strainer 过滤器

T-Cock 三通

Throttle Valves 节流阀

Triple (tee) valves 三通阀

Two-way valves 二通阀

Waste Valves 排污箱(阀)

Y Type and Cylinder Filters Y型筒型过滤器

阀门装配零部件中英文术语对译

阀体 body

阀体 valve body

阀盖 bonnet

阀盖衬套 bonnet bush

阀盖垫片 bonnet gasket

气动配件 pneumatic parts

阀瓣 Disc

阀箱 valve box

阀箱;阀限位器 valve guard

气动元件 Pneumatic component

气动装置 Pneumatic equipment

阀座 Seat ring

阀座 valve carrier

阀座 valve seat(body seat)

阀座;阀盘 valve seat

电磁阀阀座 solenoid valve seat

阀座环 seat ring

阀座密封嵌条 sealing strip for valve seat 阀杆 Stem

阀杆螺母 Yoke bushing Yoke nut

阀杆环 stem ring

法兰 flange

填料 Packing

填料垫 Packing seat

密封件 Sealing

圆柱齿轮传动装置 Cylindrical gear actuator 圆锥齿轮传动装置 Conical gear actuator

挡板 damper

导阀 Pilot valve

导向套 Valve guide disc guide

弹簧座 Spring plate

Axis Guide 轴套

Ball 球、球芯

Ball seat 密封圈

Blowdown Sealing Face 启、阀件密封面

Mut 螺母

Screw 螺栓

Spring 弹簧

Wedge Disc 闸板

注：以上的阀门-valves零部件装配术语中英文翻译字典来自英汉大词典里，期待网友增添新的阀门零部件英汉对译词汇。

阀门英语:阀门技术规范英语术语对照

技术规范 Technique norm

公称通径 Nominal diameter

口径 bore

公称压力 Nominal pressure

工作温度 Operating temperature

工作温度 Working temperature

工作压差 Operting differential pressure

工作压力 Operating pressure

工作压力 Working pressure

工作背压 Operating back pressure

关闭压力 Lockup pressure

开阀过冷度 Subcooled temperature of open valve

开阀温度 Opening valve temperature

开启高度 Lift

壳体试验 Shell test

壳体试验压力 Seal test pressure

连接槽尺寸 Dimension of connecting channel

连接尺寸 Conncetion cimension

连接形式 Type of connection

流道面积 Flow area

流道直径 Flow diameter

流量孔板 flow orifice plate

流量特性 Flow characteristics

流量特性偏差 Flow characteristics derivation

漏汽量 Steam loss

密封面 Sealing face

密封试验 Seal test

密封试验压力 Seal test pressure

上密封 Back seat

上密封试验 Back seal test

适用介质 Suitable medium

适用温度 Suitable temperature

无负荷漏汽量 No-load steam loss

无负荷漏汽率 Rate of no-load steam loss

相对静偏差 Relative static characteristics derivation

相对流量特性偏差 Relative flow characteristics derivation

相对压力特性偏差 Relative pressure characteristics derivation 压力特性 Pressure characteristics

压力特性偏差 Pressure characteristics derivation

压力增长系数 Pressure increasing ratio

有负荷漏汽量 Load steam loss

有负荷漏汽率 Rate of load steam loss

主要外形尺寸 Prime out-form dimensions

主要性能参数 Specifeca tion speeification

最大过冷度 Maximum subcoold temperature

最大流量 Maximum flow rate

最大压差 Maximum differential pressure

最低工作压力 Minimum operating pressure

最高背压率 Maximum rate of back pressure

最高工作背压 Maximum operating back pressure

最高工作温度 Maximum operating temperature

最高工作压力 Maximum operating pressure

最高排水温度 Maximum temperature at discharging

最高允许温度 Maximum allwable temperature

最高允许压力 Maximum allowable pressure

最小过冷度 Minimum subcooled temperature

最小压差 Minimum differntial pressure

常闭式 Normally closed type

常开式 Normally open type

超过压力 Overpressure of a safety valve

当量计算排量 Equivalent calculated capacity

Applicable medium 适用介质

Applicable temperature 适用温度

Butt Clamp 对夹

Chemical analysis 化学成份

Connecting format 连接形式

Double disc 双闸板

Flexible disc 弹性闸板

Flange 法兰 Hoop 卡箍

Inside thread 内螺纹

Jacket 夹套

Mains 电源

Material chemical analysis and mechanical capacity 材料化学成份和机械性能

materials 材料

Materials for main parts 主要零件材料Mechanical capacity 机械性能

Max. Discharging Capacity 最大排水量Max. Operating Temperature 最高工作温度Max. Allowable Temperature 最高允许温度Max. Allowable Pressure 最高允许压力Model 型号

Name of parts 零件名称

nitrogen (N) 氮

Nozzle 排气口

Outside thread 外螺纹

Oxidant 氧化性介质

Parallel 平行

Piping 管路

Piston 活塞

Reductant 还原性介质

Rising stem 明杆

Seal 阀座，密封面

Seat testing pressure 压力气密封试验压力Socket 卡套

Specifications 性能规范

Single disc 单闸板

Solid 刚性

Strengh testing pressure 强度试验压力Steam , condensate 蒸汽,凝结水

Stroke 冲程，行程

Water,oil,steam 水,温度,气

Wedge 楔式 Welding 焊接

阀门及术语中英文对照

关键字：阀门 1.阀门种类术语 AngleStopValves角式截止阀 AngleThrottleValves角式节流阀 AngleTypeGlobeValves角式截止阀 ButterflyTypeNon-slamCheck蝶式缓冲止回阀ButterflyValveswithGearActuator蜗轮传动蝶阀 Cock二通 CQThreadBallValvesCQ螺纹球阀 DiaphragmValves隔膜阀 DoubleDiscFlatGateValves双闸板平板闸阀DoubleDiskParallelGateValves明杆平行式双闸板闸板DoubleOpeningExhaustValves双口排气球ElectricActuatedStopValves电动截止阀ElectricActuatedWedgeGateValves电动楔式闸阀ElectricDoubleDiskParallelGateValves电动平行式双闸板闸板EmergenyCut-offValves紧急切断阀 FreeFloatTypeSteamTrap浮球式疏水阀 FlangeBallValves法兰球阀 FlangeGateValves法兰闸阀 FlangeGlobeValves法兰截止阀 GaugeValves仪表阀 HardSealButterflyValves金属密封碟阀HighTemperaturePressurePowerStationGateValves高温高压电站闸阀HighTemperaturePressurePowerStationGlobeValves高温高压电站截止阀 LiftCheckValves升降式止回阀 LiftCheckValves升降式止回阀 LiningBallValves衬里球阀 LiningButterflyValves衬里碟阀 LiningCheckValves衬里止回阀 LiningCock衬里二通 LiningGlobeValves衬里截止阀 LiningT-CockValves衬里三通旋塞阀 LiquidIndicator液位计 LPGPipeFitting液化气管件 MagneticCo-operateGlobeValves磁耦合截止阀

常用管道、阀门、材料中英文名称对照

目录 1 管道组成件Piping component (1) 1.1 管子Pipe (1) 1.2 管件Fitting (2) 1.3 弯管Bend (3) 1.4 法兰Flange (FLG） (4) 1.5 垫片Gasket (GSKT) (5) 1.6 阀门Valve (6) 1.7 管道特殊件Piping Specialty (10) 1.8 端部连接End Connection (12) 1 管道组成件Piping component 1.1 管子Pipe 管子(按照配管标准规格制造的) pipe 管子(不按配管标准规格制造的其他用管) tube 钢管steel pipe 铸铁管cast iron pipe 衬里管lined pipe 复合管clad pipe 碳钢管carbon steel pipe 合金钢管alloy steel pipe 不锈钢stainless steel pipe 奥氏体不锈钢管austenitic stainless steel pipe 铁合金钢管ferritic alloy steel pipe 轧制钢管wrought-steel pipe 锻铁管wrought-iron pipe 无缝钢管seamless (SMLS) steel pipe 焊接钢管welded steel pipe 电阻焊钢管electric-resistance welded steel pipe

电熔（弧）焊钢板卷管electric-fusion (arc)-welded steel-plate pipe 螺旋焊接钢管spiral welded steel pipe 镀锌钢管galvanized steel pipe 热轧无缝钢管hot-rolling seamless pipe 冷拔无缝钢管cold-drawing seamless pipe 水煤气钢管water-gas steel pipe 塑料管plastic pipe 玻璃管glass tube 橡胶管rubber tube 直管run pipe; straight pipe 1.2 管件Fitting 弯头elbow 异径弯头reducing elbow 带支座弯头base elbow k半径弯头long radius elbow 短半径弯头short radius elbow 长半径180°弯头long radius return 短半径180°弯头short radius return 带侧向口的弯头（右向或左向）side outlet elbow (right hand or left hand) 双支管弯头（形）double branch elbow 三通tee 异径三通reducing tee 等径三通straight tee 带侧向口的三通（右向或左向）side outlet tee (right hand or 1eft hand) 异径三通（分支口为异径）reducing tee (reducing on outlet) 异径三通（一个直通口为异径）reducing tee (reducing on one run) 带支座三通base tee 异径三通（一个直通口及分支口为异径）reducing tee (reducing on one run and outlet) 异径三通（两个直通口为异径，双头式）reducing tee (reducing on both runs, bull head) 45°斜三通45° lateral 45°斜三通（支管为异径）45° lateral (reducing on branch) 45°斜三通(一个直通口为异径) 45° lateral (reducing on one run) 45°斜三通(一个直通口及支管为异径) 45° lateral (reducing on one run and branch) Y型三通（俗称裤衩）true “Y” 四通cross 等径四通straight cross 异径四通reducing cross

(完整版)阀门专业术语中英文对照

1. 缩写词和代号 1.1 法兰结构形式及密封面代号 BL---Blind Flange 法兰盖 LF/SE---Lapped Joint Flange 对焊环松套法兰SO---Slip-On Welding Flange 带颈平焊兰 SW---Socket Welding Flange 承插焊法兰 Th---Thread Flange 螺纹法兰 WN---Welding Neck Flange 带颈对焊法兰 FF---All Flat Face 全平面 RF---Raised Face 突面 FM---Female Face 凹面 M---Male Face 凸面 T---Tongue Face 榫面 G---Groove Face 槽面 RJ---Ring Joint 环连接面 1.2 常用缩写词` 13Cr + STL---13Cr Trim with Stellited Seat DWD---Split Wedge Disc 楔形双闸板 MFR'S---Manufacturer's Standard 制造厂标准RWD---Resilient Wedge Disc 弹性闸板 13Cr阀芯带STL阀座 "ENP---Electroless Nickel Plating 镍磷硼合金镀层NBR---Nitrile-butadiene Ruber 丁腈橡胶Sch.No.---Schedule Number 管表号 Bana-N 丁钠橡胶 FE---Flanged End 法兰连接端 NPS---Nominal Pipe Size 管子公称尺寸（英制）STL---Stellited 硬质合金（钴－铬－钨合金） BB---Bolted Bonnet 螺栓连接的阀盖 FLG---Flange 法兰 NPT---National Pipe Taper Thread 60°锥管螺纹SWD---Solid Wedge Disc 楔形单闸板 BC---Bolted Cap 螺栓连接的阀帽 FS---Forged Steel 锻钢 NRS---Non-Rising Stem 暗杆 SW----Socket Weld 承插焊 BN---Bayonet 卡套连接 FWD---Flexible Wedge Disc 挠性楔形闸板 OS---Outside Screw 外螺纹 TB---Thread Bonnet 螺纹阀盖 BRZ---Bronze 青铜 GALV---Galvanized 镀锌 OS&Y---Outside Screw with Yoke 外螺纹带支架

阀门英语术语

:装配零部件术语英汉对照阀体body 阀体valve body 阀盖bonnet 阀盖衬套bonnet bush 阀盖垫片bonnet gasket 阀瓣Disc 阀箱valve box 阀箱;阀限位器valve guard 阀座Seat ring 阀座valve carrier 阀座valve seat(body seat) 阀座;阀盘valve seat 阀座环seat ring 阀座密封嵌条sealing strip for valve s eat 阀杆Stem 阀杆螺母Yoke bushing Yoke nut 阀杆环stem ring 法兰flange 填料Packing 填料垫Packing seat 密封件Sealing 圆柱齿轮传动装置Cylindrical gear actua tor 圆锥齿轮传动装置Conical gear actuator 挡板damper 导阀Pilot valve 导向套Valve guide disc guide 弹簧座Spring plate Axis Guide 轴套 Ball 球、球芯 Ball seat 密封圈 Blowdown Sealing Face 启、阀件密封面Mut 螺母 Screw 螺栓 Spring 弹簧 Wedge Disc 闸板阀门英语名词术语（1）范围 ? ? 本标准适用于工业管道（或机器、设备）的通用阀门。 ? ? 阀门分类 ? ? 阀门valve ? ? 用来控制管道内介质流动的，具有可动机构的机械产品的总体。 ? ? 闸阀gate valve, slide valve ? ? 启闭件(闸板)由阀杆带动,沿阀座(密封面)作升降运动的阀门。 ? ? 截止阀globe valve, stop valve ? ? 启闭式（阀瓣）由阀杆带动，沿阀座（密封面）轴线作升降运动的阀门

阀门术语

Air valves 空气阀门 Angle Stop valves 角式截止阀 Angle Throttle Valves 角式节流阀 Angle Type Globe Valves 门角式截止阀 Ash valves 排灰阀 Aspirating valves 吸（抽）气阀 Auxiliary valves 辅助（副）阀 Balance valves 平衡阀 Bellows valves 波纹管阀 Blowdown valves 泄料（放空，排污）阀 Brake valves 制动阀 Butterfly Type Non-slam Check 蝶式缓冲止回阀 Butterfly Valves with Gear Actuator 蜗轮传动蝶阀 Buttwelding valves 对焊连接阀 Clamp valves 对夹式阀门 Cock 二通 Combination valves 组合阀 CQ Thread Ball Valves CQ螺纹球阀 Culvert valves 地下管道阀 Deceleration valves 减速阀 Diaphragm Valves 隔膜阀 Decompression valves 泄压阀 Double Disc Flat Gate Valves 双闸板平板闸阀 Double Disk Parallel Gate Valves明杆平行式双闸板闸板 Double Opening Exhaust Valves 双口排气球 Drainage valves 排水阀 Electric Actuated Stop Valves 电动截止阀 Electric Actuated Wedge Gate Valves电动楔式闸阀 Electric Double Disk Parallel Gate Valves电动平行式双闸板闸板Emergeny Cut-off Valves 紧急切断阀 Exhaust valves 排气阀 Free Float Type Steam Trap 浮球式疏水阀 Flange Ball Valves 法兰球阀 Flange Gate Valves 法兰闸阀 Flange Globe Valves 法兰截止阀 Gauge Valves 仪表阀 Hand-operated valves 手动阀 Hard Seal Butterfly Valves 金属密封碟阀 High Temperature Pressure Power Station Gate Valves 高温高压电站闸阀High Temperature Pressure Power Station Globe Valves 高温高压电站截止阀Hydraulic relay valves 液压继动阀 Lift Check Valves 升降式止回阀 Lift Check Valves 升降式止回阀 Limit valves 限位阀

阀门部件中英文对照

阀门部件中英文对照阀 valve 阀板 valve deck plate 阀板 valve plate 阀板式活塞泵 valve deck plate type piston pump 阀板式活塞泵 valve plate type piston pump 阀瓣 Disc 阀操纵杆 valve operating rod 阀痤槽 valve seat recess 阀挡 valve grid 阀挡 valve positioner 阀挡 valve stop 阀导杆 valve tail rod 阀导向器 valve guide 阀盖 bonnet 阀盖衬套 bonnet bush 阀盖垫片 bonnet gasket 阀杆 stem 阀杆 valve rod 阀杆 valve spindle 阀杆端部尺寸 Dimmension of valve stem end 阀杆环 stem ring 阀杆螺母 Yoke bushing Yoke nut 阀杆填料 stem packing 阀杆头部尺寸 Dimension of valve stem head 阀簧 valve spring 阀簧压板 valve spring plate 阀控水锤泵 valve-controlled hydraulic ram 阀框架 valve yoke 阀门 Valve 阀门传动装置 valve bandle set 阀门和管件 Valves and Fittings 阀门盘根 valve packing 阀门手柄 valve handle 阀盘 disc 阀盘 valve disc 阀片 Disc 阀球 valve ball 阀驱动臂 valve driving arm 阀驱动臂 valve motion arm 阀式活塞 valve type piston 阀式活塞 valve type bucket 阀室式活塞泵 valve box type piston pump

英文阀门名称大全

阀门大全（中英对照）发帖人: 77鲜点击量: 1817 air-compressor valve 空气压缩机阀门 automatic cutout valve 自动切断阀门 backlash valve 无游隙阀门 High temperature valve 高温阀门 hose valve 水带阀门 pipe manifold valves 管道汇集器阀门 pneumatic cylinder cock valve 风动汽缸排水阀阀门pneumatic positioner valve 气动阀门定位器 pneumatic sander valve 风动撒砂器阀门 quick opening valve 快开阀门 quick-opening gate valve 速启阀门 standby valve 应急阀门; 备用阀门 two selenoid 双螺管阀门 valve chest 阀门室 valve clearance 阀门间隙；阀余隙 valveman 阀门操作者 wash-out valve 清洗阀门 adjusting valve 调整阀, 调节阀 admission valve 进气阀; 进浆阀 air admission valve 进气阀 air bleed(ing) valve 排气阀; 排气嘴 air control valve 空调阀 air cylinder valve 气筒阀 air escape valve 泄气阀 air inlet valve (=air intake valve) 进气阀; 进风阀 air operated throttle motor 风动节流器, 风动节流阀马达 air pilot valve 空气导向阀 air pressure governor valve 风压调压阀 air relay valve 空气中继阀 air release valve (=air relief valve) 排气阀; 放空阀 air reversing valve 空气换向阀 air shut-off valve 空气关闭阀 air signal reducing valve 空气信号减压阀

阀门中、英文对照表

阀门valve lead; valve 阀门扳手valve key 阀门操纵程序valve management program 阀门尺寸valve size 阀门的研磨grinding-in of valve 阀门垫圈valve washer 阀门定位器pneumatic servo; valve positioner 阀门定位伺服回路valve positioning servo loop 阀门杆valve lever 阀门杆导路guide for the valve rod 阀门钢valve steel 阀门活塞valve piston 阀门间隙valve clearance 阀门键valve key 阀门开度valve opening 阀门控制valve control 阀门控制机构valve control mechanism 阀门密封valve seal 阀门磨床valve grinding machine 阀门碰撞knocking of the valve 阀门切换型蓄热式heat accumulating type of shift change 阀门升程valve lift 阀门式给水栓gate-type hydrant 阀门式消防龙头gate-type hydrant 阀门室valve box 阀门手轮valve handle 阀门铣床valve milling machine 阀门箱valve box 阀门型式valve type 阀门座valve seat 回答者：llyshirley - 举人五级3-21 11:16 adjusting valve 调整阀, 调节阀 admission valve 进气阀; 进浆阀 agitating valve 搅拌桨 air valve (空)气阀 air admission valve 进气阀 air bleed(ing) valve

阀门英语术语

导阀Pilot valve 导向套Valve guide disc guide 弹簧座Spring plate Axis Guide 轴套Ball 球、球芯 Ball seat 密封圈Blowdown Sealing Face 启、阀件密封面Mut 螺母 Screw 螺栓 Spring 弹簧Wedge Disc 闸板阀门英语名词术语（1）范围本标准适用于工业管道（或机器、设备）的通用阀门。阀门分类阀门valve 用来控制管道内介质流动的，具有可动机构的机械产品的总体。闸阀gate valve, slide valve

启闭件(闸板)由阀杆带动,沿阀座(密封面)作升降运动的阀门。截止阀globe valve, stop valve 启闭式（阀瓣）由阀杆带动，沿阀座（密封面）轴线作升降运动的阀门节流阀throttle valve 通过启闭件（阀瓣）改变通路截面积，以调节流量、压力的阀门。球阀ball valve 启闭式（球体）绕垂直于通路的曲线旋转的阀门。蝶阀butterfly valve 启闭式（蝶板）绕固定轴旋转的阀门。

阀门及配件的中英文对照较全

阀门英文对照 Handle Nut 手柄螺母 Handle Sleeve 手轮套管 Hard Seal Butterfly Valves 金属密封碟阀 High Temperature Pressure Power Station Gate Valves 高温高压电站闸阀High Temperature Pressure Power Station Globe Valves 高温高压电站截止阀Hoop 卡箍 Hayne's alloy 钴铬钨合金 High tem perature steel 高温钢 Hand-operated valves 手动阀 Hard Seal Butterfly Valves 金属密封碟阀 Hydraulic relay valves 液压继动阀 Hex Hut 手轮螺帽 Hydraulic Hand Gun 手动液压加注枪 Identification Plate 铭牌Integral Seat 整体阀座 Indicator 指示环Indicator Plug 指示塞 ISO flange dimensions ISO 法兰尺寸ISO bolt circle ISO 螺栓外径 Inside theread 内螺纹 Inspection And Test 检验和试验 Lifting Eye Bolt 吊眼螺栓 Lower Stem 下部阀杆 Lower Bearing 下部轴承 Lower Bushing 下部衬套 Liner 衬垫 lug style 吊耳式（蝶阀） Locking Device 锁定装置 Lift Check Valves 升降式止回阀 Lining Ball Valves 衬里球阀 Lining Butterfly Valves 衬里碟阀 Lining Check Valves 衬里止回阀 Lining Cock 衬里二通 Lining Globe Valves 衬里截止阀 Lining T-Cock Valves 衬里三通旋塞阀 Liquid Indicator 液位计 LPG Pipe Fitting 液化气管件 Low tem perature steel 低温钢 Limit valves 限位阀 Lining Ball Valves 衬里球阀 Lining Butterfly Valves 衬里碟阀 Lining Check Valves 衬里止回阀 Lining Cock 衬里二通 Lining Globe Valves 衬里截止阀 Lining T-Cock Valves 衬里三通旋塞阀

各种阀门术语的中英文对照

各种阀门术语的中英文对照 Angle Stop Valves 角式截止阀 Angle Throttle Valves 角式节流阀 Angle Type Globe Valves 角式截止阀 Butterfly Type Non-slam Check 蝶式缓冲止回阀 Butterfly Valves with Gear Actuator 蜗轮传动蝶阀 Cock 二通 CQ Thread Ball ValvesCQ 螺纹球阀 Diaphragm Valves 隔膜阀 Double Disc Flat Gate Valves 双闸板平板闸阀 Double Disk Parallel Gate Valves 明杆平行式双闸板闸板 Double Opening Exhaust Valves 双口排气球 Electric Actuated Stop Valves 电动截止阀 Electric Actuated Wedge Gate Valves 电动楔式闸阀 Electric Double Disk Parallel Gate Valves 电动平行式双闸板闸板 Emergency Cut-off Valves 紧急切断阀 Free Float Type Steam Trap 浮球式疏水阀 Flange Ball Valves 法兰球阀 Flange Gate Valves 法兰闸阀

Flange Globe Valves 法兰截止阀 Gauge Valves 仪表阀 Hard Seal Butterfly Valves 金属密封碟阀 High Temperature Pressure Power Station Gate Valves 高温高压电站闸阀 High Temperature Pressure Power Station Globe Valves 高温高压电站截止阀 Lift Check Valves 升降式止回阀 Lift Check Valves 升降式止回阀 Lining Ball Valves 衬里球阀 Lining Butterfly Valves 衬里碟阀 Lining Check Valves 衬里止回阀 Lining Cock 衬里二通 Lining Globe Valves 衬里截止阀 Lining T-Cock Valves 衬里三通旋塞阀 Liquid Indicator 液位计 LPG Pipe Fitting 液化气管件 Magnetic Co-operate Globe Valves 磁耦合截止阀 Magnetism Forle Pumps 磁力泵 Manual Oil Pumps Valves 手摇油泵(阀) Meter Needle Type Globe Valves 仪表针形截止阀 Oblique Stop Valves 直流式截止阀 Parallesl Slide Valves 浆液阀

中英文阀门对照表

1-01 自动阀门 Self-acting valve 依靠介质本身的能力而自行动作的阀门 1-02 驱动阀门 Actuanted valve 借助手动、电力、液压或气压来操纵的阀门 2-01 闸阀 Gate valve,slide valve 启闭件（闸板）由阀杆带动，沿阀座密封面做升降运动的阀门 2-02 平行式闸阀Parallel gate valve,parallel slide valve 闸板的两侧密封面相互平行的闸阀 2-03 楔式闸阀 Wedge gate valve 闸板的两侧密封面成楔状的闸阀 2-04 升降杆式闸阀 Outside screw stem rising through handwheel type gate valve 阀杆做升降运动，其传动螺纹在体腔外部的闸阀 2-05 旋转杆式闸阀Inside screw nonrising stem type gate valve 阀杆作旋转运动,其传动螺纹在体腔内部的闸阀 2-06 快速启闭闸阀 Quick open-and-close gate valve 阀杆既作旋转又作升降运动的闸阀 2-07 缩口闸阀Contraction cavity gate valve 阀体内的通道直径不同,阀座密封面处的直径小于法兰连接处的直径的闸阀 2-08 平板闸阀Flat gate valve 这种类型的闸阀有带导流孔和不带导流孔之分.带导流孔的平板闸阀能通球清管,不带导流孔的平板闸阀只能用作管路上的启闭装置 3-01 蝶阀 Butterfly valve 启闭件(蝶板)绕固定轴旋转的阀门 3-02 中线蝶阀Center line-type butterfly valve 蝶板的回转中心(即阀门轴中心)位于阀体的中心线和蝶板的密封截面上的蝶阀 3-03 单偏心蝶阀Single-eccentric center butterfly vale 蝶板的回转中心(即阀门轴中心)位于阀体的中心线上且与蝶板密封面形成一个尺寸偏置的蝶阀 3-04 双偏心蝶阀Double-eccentric center butterfly valve 蝶板的回转中心(即阀门轴中心)与蝶板密封截面形成一个尺寸偏置,并与阀体中心线形成另一个尺寸偏置的蝶阀 3-05 三偏心蝶阀Three-eccentric center butterfly valve 蝶板的回转中心(即阀门轴中心)与蝶板密封面形成一个尺寸偏置,并与阀体中心线形成另一个尺寸偏置;阀体密封面中心线与阀座中心线(即阀体中心线)形成一个角偏置的阀门 4-01 旋转阀 Rotary valve 启闭件沿阀座密封曲面轴心作相对旋转运动的阀门 4-02 球阀 Ball valve 启闭件(球体)绕垂直于通路的轴线旋转的阀门 4-03 浮动球阀 Float ball valve 球体不带有固定轴的球阀 4-04 固定球球阀Fixed ball valve 球体带有固定轴的球阀 4-05 弹性球球阀Flexible ball valve 球体上开有弹性糟的球阀 4-06 旋塞阀Cock,plug 启闭件(塞子)绕其轴线旋转的阀门 4-07 紧定式旋塞阀Clampyte plug valve 塞体内不带填料,塞子与塞体密封面的密封依靠拧紧旋塞下面的螺母来实现的旋塞阀 4-08 填料式旋塞阀Cland packing plug valve 采用填料密封的旋塞阀

阀门大全(中英对照)

阀门大全（中英对照） air-compressor valve 空气压缩机阀门 automatic cutout valve 自动切断阀门backlash valve 无游隙阀门 High temperature valve 高温阀门hose valve 水带阀门 pipe manifold valves 管道汇集器阀门 pneumatic cylinder cock valve 风动汽缸排水阀阀门 pneumatic positioner valve 气动阀门定位器 pneumatic sander valve 风动撒砂器阀门 quick opening valve 快开阀门 quick-opening gate valve 速启阀门standby valve 应急阀门; 备用阀门two selenoid 双螺管阀门 valve chest 阀门室 valve clearance 阀门间隙；阀余隙valveman 阀门操作者 wash-out valve 清洗阀门 adjusting valve 调整阀, 调节阀admission valve 进气阀; 进浆阀 air admission valve 进气阀 air bleed(ing) valve 排气阀; 排气嘴air control valve 空调阀 air cylinder valve 气筒阀 air escape valve 泄气阀 air inlet valve (=air intake valve) 进气阀; 进风阀 air operated throttle motor 风动节流器, 风动节流阀马达 air pilot valve 空气导向阀 air pressure governor valve 风压调压阀 air relay valve 空气中继阀 air release valve (=air relief valve) 排气阀; 放空阀 air reversing valve 空气换向阀 air shut-off valve 空气关闭阀 air signal reducing valve 空气信号减压阀air slide valve 空气分配阀 air starting (control) valve 空气起动(控制)阀 air straining check valve 空气滤尘止回阀 air valve 空气阀 air vent valve 气动调压阀, 排气阀air-actuated direction valve 气动控制换向阀 air-compressor valve 空气压缩机阀门 air-operated valve 气动换向阀 air-vacuum proportional valve 空真比例阀 air-vacuum two way valve 空真二位阀 alarm valve 报警阀 aligned grid valve 栅极中点校直的电子管阀 Allan valve 阿伦滑阀 altitude valve 【航空】高度阀(航空发动机汽化器的可调整阀) ammonia valve 【工】氨阀 angle back-pressure valve 背压角阀angle globe valve 折角球形阀 angle stop valve 弯形止阀, 折角止阀 angle valve 角阀 angle water valve 折角水阀 annular ring valve 环形阀; 环状阀anti-g valve 【航空】防超重活门, 抗重力阀 application pilot valve 作用导阀application valve 作用阀, 控制阀ashpan blower valve 灰盘吹风阀Askania valve 射流管阀 atmos valve (=atmospheric valve) 大气阀, 空气阀; 放空阀 autocontrol valve 自动控制阀automatic air valve 自动空气阀automatic brake valve 自动制动阀automatic control valve 自动控制阀automatic cutout valve 自动切断阀门

阀门术语英汉对照表

阀门术语英汉对照表-转行业分析 2010-10-14 10:00:09 阅读29 评论0 字号：大中小订阅 https://www.360docs.net/doc/4213468930.html,/blog/gyfxzk/article/b0-i10019283.html 阀门术语英汉对照表阀门常用法定计量单位换算表阀门材质材料英汉术语词典阀门材质-钢铁材料 copper 合金 cast steel 铸钢 Steel Casting iron 碳素钢铸件 Fine Steel Casting iron 优质碳素钢 Stainless steel 不锈钢 Stainless acid-resisting steel 不锈耐酸钢 Chromium-molybdenum steel 铬钼钢 Chrominm-molybdenum-vanadium steel 铬钼钒钢 Spring steel 弹簧钢 Chromium stainless steel 铬不锈钢 Gray Cast iron 灰铸铁 nodular cast iron 球墨铸铁 Ductile Cast iron 球墨铸铁 Chromel alloy 镍铬合金 Hayne's alloy 钴铬钨合金 High tem perature steel 高温钢 Low tem perature steel 低温钢 Monel 蒙乃尔合金 bar 棒材 billet 方钢，钢方坯

bloom 钢坯,钢锭 section 型材 steel ingot 钢锭阀门材质-有色金属材料 bronze 青铜 brass 黄铜 Pure cupper 纯铜 Cuprum alloy 铜合金 Casting aluminium brass 铸铝黄铜Casting aluminium bronze 铸铝青铜Pure aluminum 纯铝阀门材质-塑料材料 Nylon 尼龙塑料Polytetrafluoroethylene 聚四氟乙烯阀门材质-橡胶材料 CHR rubber 氯晴橡胶 Buna-N rubber 丁晴橡胶 Rubbeer graphite board 橡胶石墨板Fluorous rubber 氟橡胶阀门材质-其他材料 Expanded graphite 柔性石墨Stainless and Graphite 不锈钢/石墨stock 原料 Ceramic metal 陶瓷金属阀门产品种类术语-valve英汉互译词典阀门 valve 通用阀门 General valve 球阀 Ball valve 槽车球阀 Tank Lorry Ball Valves CQ螺纹球阀 CQ Thread Ball Valves

阀门中英文对照表

阀门中英文对照表汉语术语英文 CQ螺纹球阀CQ Thread Ball Valves L形三通式L-pattern three way T形三通式T-pattern three way 安全阀Safety valve 暗杆闸阀Inside screw nonrising stem type gate valve 百叶窗;闸板shutter 百叶窗式挡板louver damper 摆阀式活塞泵ng gate piston pump 保温式Steam jacket type 报警阀alarm valve 报警阀;信号阀;脉冲阀sentinel valve 背压调节阀back pressure regulating valve 背压率Rate of back pressuec 本体阀杆密封body stem seal 波纹管阀Bellows valves 波纹管密封阀bellow sealed valve 波纹管密封式Bellows seal type 波纹管平衡式安全阀Bellows seal balance safety valve 波纹管式减压阀Bellows reducing valve 波纹管式减压阀Bellows weal reducing valve

薄膜thin film 薄膜;隔膜diaphragm 薄膜式减压阀Diapjragm reducing valve 薄型闸阀Thin Gate Valves 不封闭式Unseal type 槽车球阀Tank Lorry Ball Valves 颤振Flutter 常闭式Normally closed type 常开式Normally open type 超低温阀门Cryogenic valve 超高压阀门Super high pressure valve 超过压力Overpressure of a safety valve 衬胶隔膜阀rubber lined diaphragm 衬胶截止阀rubber lined globe valve 垂直板式蝶阀Vertical disc type butterfly valve 磁耦合截止阀Magnetic Co-operate Globe Valves 带补充载荷的安全阀Supplementary loaded safety valve 带辅助装置的安全阀Assisted safety valve 单阀碟双面平行密封闸阀parallel single disk gate valve单口排气阀Single Opening Exhaust Valves 单向阀Non-return Valve 单闸板Single gate disc

阀门名词术语中英文对照

阀门名词术语中英文对照阀门valve 闸阀gate valve 截止阀globe valve, stop valve 节流阀throttle valve 球阀ball valve 蝶阀butterfly valve 隔膜阀diaphragm valve 旋塞阀plug valve 止回阀check valve, non-return valve 安全阀safety valve, pressure 减压阀pressure reducing valve 疏水阀steam trap 排污阀blow-down valve 调节阀(控制阀)control valve, adjusting valve 分配阀dividing valve 混合阀mixing valve 水力控制阀hydraulic control valve 手动阀门manual operated valve 电动阀门electrical operated valve 气动阀门pneumatically operated valve 低压阀门low pressure valve 中压阀门middle pressure valve 高压阀门high pressure valve 超高压阀门super high pressure valve 高温阀门high temperature valve 中温阀门moderate temperature valve 常温阀门normal temperature valve 低温阀门sub-zero valve 超低温阀门cryogenic valve 结构长度face-to-face dimension 结构形式type of construction 直通式through way type 角式angle type 直流式y-type 三通式three way type T形三通式T-pattern three way L形三通式L-pattern three way 平衡式balance type 杠杆式lever type 常开式normally open type