弃善扬恶 摘要翻译
Abandon Evil and Raise Well
— the feature of Jin Yong’s novel
(Gao Shichang
Institute of literature and media
Department of Chinese language and literature
Student Number：100114080
Supervisor：Li Shaoyong）
Abstract
In The Semi Gods and Semi Devils，Jin Yong describes the evil in human’s nature by his tragic complex，the intention of advising coincides with the idea in “theory of original evil of human nature.”The overall features of Jin Yong’s novels reflect best in The Semi Gods and Semi Devils. Choosing a character as a representative based on the human-oriented principle, it is easy to show the evil in human’s deep soul. While, Jin Yong leaves hope for us, that is, leading people to do good works through hard work to make them abandon evil and raise well.
Key words: Jin Yong, evil, The Semi Gods and Semi Devils, warn，to do good works
英文摘要翻译练习
文献摘要翻译： 文摘1： Particle Formation during Anatase Precipitation of Seeded Titanyl Sulfate Solution Sekhar Sathyamoorthy,? Geoff D. Moggridge,*,? and Michael J. Hounslow? Department of Chemical Engineering, Cambridge University, Pembroke Street, Cambridge CB2 3RA, U.K,., and Department of Chemical and Process Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD, U.K. Received July 14, 2000 ABSTRACT: The formation of anatase particles in the Sulfate Process is an important step in the production of white pigment. This paper investigates the mechanisms behind particle formation during anatase precipitation from seeded concentrated titanyl sulfate solution. The process of particle formation was found to be highly dependent on the volume of seeds inoculated. Secondary nucleation played an important role in the production of anatase crystals and, ultimately, overall yield of the precipitation step. Anatase crystals were found to be between 4 and 8 nm from powder diffraction line broadening calculations. Nucleation also influences the structure and size of primary agglomerates consisting of a number of crystals. The final anatase particles recovered from the precipitation are in the form of 1-2μm aggregates, comprised of polycrystalline primary agglomerates. 摘自Crystal Growth & Design,2001,1(2):123~129 文摘2： Controlling Particle Size During Anatase Precipitation Sekhar Sathyamoorthy and Geoff D. Moggridge Dept. of Chemical Engineering, Cambridge University, Pembroke Street, Cambridge CB2 3RA, U.K. Michael J. Hounslow Dept. of Chemical and Process Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD, U.K. 摘自：AIChE Journal ，2001 Vol. 47, No. 9 Titanium dioxide particles in the form of anatase are precipitated from concentrated titanyl sulfate solution in the sulfate process, which are then recovered by a filtration process downstream of the precipitation stage. A pre vious study by Sathyamoorthy et al. showed that the final anatase particles are aggregates(1-2 μm)consisting of numerous crystals(7 ~ 8 nm)arranged in primary agglomerates(60 ~ 100 nm). Pigment quality is determined by crystal and primary agglomerate size. One way of improving filtration rate is by the formation of larger aggregates, while maintaining the crystal and primary agglomerate size at optimum values. In a new seeding procedure proposed, the controlled inoculation of seeds used in industry is combined with a new type of seed (Large Seeds). The new seeding procedure has the
毕业论文英文参考文献与译文
Inventory management Inventory Control On the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion. The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility. Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored: First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments . Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field of
机械设计设计外文文献翻译、中英文翻译、外文翻译
机械设计 摘要：机器是由机械装置和其它组件组成的。它是一种用来转换或传递能量的装置，例如：发动机、涡轮机、车辆、起重机、印刷机、洗衣机、照相机和摄影机等。许多原则和设计方法不但适用于机器的设计，也适用于非机器的设计。术语中的“机械装置设计”的含义要比“机械设计”的含义更为广泛一些，机械装置设计包括机械设计。在分析运动及设计结构时，要把产品外型以及以后的保养也要考虑在机械设计中。在机械工程领域中，以及其它工程领域中，所有这些都需要机械设备，比如：开关、凸轮、阀门、船舶以及搅拌机等。 关键词：设计流程设计规则机械设计 设计流程 设计开始之前就要想到机器的实际性，现存的机器需要在耐用性、效率、重量、速度，或者成本上得到改善。新的机器必需具有以前机器所能执行的功能。 在设计的初始阶段，应该允许设计人员充分发挥创造性，不要受到任何约束。即使产生了许多不切实际的想法，也会在设计的早期，即在绘制图纸之前被改正掉。只有这样，才不致于阻断创新的思路。通常,还要提出几套设计方案，然后加以比较。很有可能在这个计划最后决定中,使用了某些不在计划之内的一些设想。 一般的当外型特点和组件部分的尺寸特点分析得透彻时，就可以全面的设计和分析。接着还要客观的分析机器性能的优越性，以及它的安全、重量、耐用性，并且竞争力的成本也要考虑在分析结果之内。每一个至关重要的部分要优化它的比例和尺寸，同时也要保持与其它组成部分相协调。 也要选择原材料和处理原材料的方法。通过力学原理来分析和实现这些重要的特性，如那些静态反应的能量和摩擦力的最佳利用，像动力惯性、加速动力和能量；包括弹性材料的强度、应力和刚度等材料的物理特性，以及流体润滑和驱动器的流体力学。设计的过程是重复和合作的过程，无论是正式或非正式的进行，对设计者来说每个阶段都很重要。 最后，以图样为设计的标准，并建立将来的模型。如果它的测试是符合事先要
1外文文献翻译原文及译文汇总
华北电力大学科技学院 毕业设计（论文）附件 外文文献翻译 学号：121912020115姓名：彭钰钊 所在系别：动力工程系专业班级：测控技术与仪器12K1指导教师：李冰 原文标题：Infrared Remote Control System Abstract 2016 年 4 月 19 日
红外遥控系统 摘要 红外数据通信技术是目前在世界范围内被广泛使用的一种无线连接技术，被众多的硬件和软件平台所支持。红外收发器产品具有成本低，小型化，传输速率快，点对点安全传输，不受电磁干扰等特点，可以实现信息在不同产品之间快速、方便、安全地交换与传送，在短距离无线传输方面拥有十分明显的优势。红外遥控收发系统的设计在具有很高的实用价值，目前红外收发器产品在可携式产品中的应用潜力很大。全世界约有1亿5千万台设备采用红外技术，在电子产品和工业设备、医疗设备等领域广泛使用。绝大多数笔记本电脑和手机都配置红外收发器接口。随着红外数据传输技术更加成熟、成本下降，红外收发器在短距离通讯领域必将得到更广泛的应用。 本系统的设计目的是用红外线作为传输媒质来传输用户的操作信息并由接收电路解调出原始信号，主要用到编码芯片和解码芯片对信号进行调制与解调，其中编码芯片用的是台湾生产的PT2262，解码芯片是PT2272。主要工作原理是：利用编码键盘可以为PT2262提供的输入信息，PT2262对输入的信息进行编码并加载到38KHZ的载波上并调制红外发射二极管并辐射到空间，然后再由接收系统接收到发射的信号并解调出原始信息，由PT2272对原信号进行解码以驱动相应的电路完成用户的操作要求。 关键字：红外线；编码；解码；LM386；红外收发器。 1 绪论
中央文献重要术语英文翻译
中央文献重要术语译文发布 区域协同发展coordinated development between regions 城乡发展一体化urban-rural integration 物质文明和精神文明协调发展ensure that cultural-ethical and material development progress together 军民融合发展战略military-civilian integration strategy 经济建设和国防建设融合发展integrated development of the economy and national defense 京津冀协同发展coordinated development of the Beijing, Tianjin, and Hebei region 综合立体交通走廊multimodal transport corridor 居住证制度residence card system 财政转移支付同农业转移人口市民化挂钩机制mechanism linking the transfer payments a local government receives to the number of former rural residents granted urban residency in its jurisdiction 城镇建设用地增加规模同吸纳农业转移人口落户数量挂钩机制mechanism linking increases in the amount of land designated for urban development in a locality to the number of former rural residents granted urban residency there 中国特色新型智库new type of Chinese think tanks 马克思主义理论研究和建设工程Marxist Theory Research and Development Project 哲学社会科学创新工程initiative to promote innovation in philosophy and the social sciences 网络内容建设工程initiative to enrich online content 农村人居环境整治行动rural living environment improvement initiative 历史文化名村名镇towns and villages with rich historical and cultural heritage 美丽宜居乡村 a countryside that is beautiful and pleasant to live in 中文英文
外文文献及翻译
文献翻译 原文 Combining JSP and Servlets The technology of JSP and Servlet is the most important technology which use Java technology to exploit request of server, and it is also the standard which exploit business application .Java developers prefer to use it for a variety of reasons, one of which is already familiar with the Java language for the development of this technology are easy to learn Java to the other is "a preparation, run everywhere" to bring the concept of Web applications, To achieve a "one-prepared everywhere realized." And more importantly, if followed some of the principles of good design, it can be said of separating and content to create high-quality, reusable, easy to maintain and modify the application. For example, if the document in HTML embedded Java code too much (script), will lead the developed application is extremely complex, difficult to read, it is not easy reuse, but also for future maintenance and modification will also cause difficulties. In fact, CSDN the JSP / Servlet forum, can often see some questions, the code is very long, can logic is not very clear, a large number of HTML and Java code mixed together. This is the random development of the defects. Early dynamic pages mainly CGI (Common Gateway Interface, public Gateway Interface) technology, you can use different languages of the CGI programs, such as VB, C / C + + or Delphi, and so on. Though the technology of CGI is developed and powerful, because of difficulties in programming, and low efficiency, modify complex shortcomings, it is gradually being replaced by the trend. Of all the new technology, JSP / Servlet with more efficient and easy to program, more powerful, more secure and has a good portability, they have been many people believe that the future is the most dynamic site of the future development of technology. Similar to CGI, Servlet support request / response model. When a customer submit a request to the server, the server presented the request Servlet, Servlet responsible for handling requests and generate a response, and then gave the server, and then from the server sent to
研究论文英文摘要翻译
研究论文英文摘要翻译 【摘要】本文作者在多年从事学报论文摘要的撰写与翻译、审核与校对的工作中，发现我院科研论文作者提交的英文摘要撰写和翻译错误，有不少值得改善的地方。同时也提醒即将发表论文的作者，在撰写或翻译论文摘要时注意的一些理由。本文对我院英文论文的发表、摘要的撰写和英语翻译具有积极的指导。 【关键词】摘要翻译 【注】本论文受《具有军事特色的网络文化大学英语课程体系研究》科研项目支持。 （） 目前，科技论文与信息的国际交流日益频繁。但许多期刊数据库只免费提供摘要的阅读，许多国外读者只能阅读摘要来判断是否阅读全文。因此摘要的英文翻译对于论文的国际引用次数、检索率具有十分的。除非是在英语国家生活工作很长时间英语功底非常扎实，我院一般论文作者撰写摘要很大程度上是把已经写好的中文摘要翻译成英文，在撰写或翻译时有不少方面注意。 .摘要的英文翻译原则 英文摘要标题实词首字母要大写 汉语文章的标题不存在大小写之分，但有字体大小的不同。英语除了字体不同之外，还有大小写字母之分。，英文摘要的标题的实词要大写，非句首介词等虚词不大写。例如一篇论文标题为“基于静态舒适性分析的装甲车辆驾驶舱人机匹配研究”的文章英语译名为
“ ？鄄？蒺”（摘自年学报第期“基于静态舒适性分析的装甲车辆驾驶舱人机匹配研究”，作者：谢成林刘维平）。在此标题中除了两个介词“”之外，其它实词首字母大写。其次，复合词只需第一个单词首字母大写。仍以上述标题为例，复合形容词“？鄄”中只需将“”首字母“”大写，连字符后面的“”则不大写。再者，标题中较长（个字母以上）的虚词也要大写。如标题“ （非拆解发动机探伤）”中介词“”大写。此外，位于首位或末尾的虚词也大写。如：（装备采购原则研究）。 摘要标题翻译的名词化 摘要一般不是完整的句子，不含谓语动词。我院学报上见到的中文论文标题几乎较长的名词性结构或介词结构短语，很少看到完整的句子。因此在译成英文时，也大多以名词短语的形式出现，一般不包含谓语成分。比如，有篇论文标题为“履带车辆转向性能指标修正与实验研究”，就是一个以“研究”为核心词的偏正词组。其译文也是如此，只是英文中核心词的位置放到前面，如“ ”（摘自学报年“履带车辆转向性能指标修正与实验研究”，作者：宋海军高连华）。 .作者姓名的翻译要规范化 作者姓名的汉语拼音要规范 在科研论文的撰写、编辑中，经常见到姓名汉语拼音书写不够规范甚至错误的现象。根据国家颁布的《中国人名汉字拼音字母拼写法》（）的规定，姓名拼音可归纳为以下点。. 汉语姓名的拼音法以普通
文献翻译英文原文
https://www.360docs.net/doc/6d17575888.html,/finance/company/consumer.html Consumer finance company The consumer finance division of the SG group of France has become highly active within India. They plan to offer finance for vehicles and two-wheelers to consumers, aiming to provide close to Rs. 400 billion in India in the next few years of its operations. The SG group is also dealing in stock broking, asset management, investment banking, private banking, information technology and business processing. SG group has ventured into the rapidly growing consumer credit market in India, and have plans to construct a headquarters at Kolkata. The AIG Group has been approved by the RBI to set up a non-banking finance company (NBFC). AIG seeks to introduce its consumer finance and asset management businesses in India. AIG Capital India plans to emphasize credit cards, mortgage financing, consumer durable financing and personal loans. Leading Indian and international concerns like the HSBC, Deutsche Bank, Goldman Sachs, Barclays and HDFC Bank are also waiting to be approved by the Reserve Bank of India to initiate similar operations. AIG is presently involved in insurance and financial services in more than one hundred countries. The affiliates of the AIG Group also provide retirement and asset management services all over the world. Many international companies have been looking at NBFC business because of the growing consumer finance market. Unlike foreign banks, there are no strictures on branch openings for the NBFCs. GE Consumer Finance is a section of General Electric. It is responsible for looking after the retail finance operations. GE Consumer Finance also governs the GE Capital Asia. Outside the United States, GE Consumer Finance performs its operations under the GE Money brand. GE Consumer Finance currently offers financial services in more than fifty countries. The company deals in credit cards, personal finance, mortgages and automobile solutions. It has a client base of more than 118 million customers throughout the world
摘要英文翻译
房地产企业安全氛围对安全行为的影响研究 摘要：为了探讨房地产企业安全氛围对员工安全行为的影响及其作用机制。研究采用问卷调查研究的方法，调查对象为某房地产企业的200名员工。结果表明，安全氛围对安全行为有显著的正向影响。其中，安全氛围中的“工作环境”和“安全意识”维度对员工安全行为有着直接的显著正向影响；“管理层承诺”维度对员工安全行为没有直接的显著的影响，但是管理层承诺通过工作环境和安全意识的完全中介作用于员工安全行为。 关键词：管理层承诺；安全意识；安全行为；结构方程模型 The Effect of Safety Climate on Safety Behavior in Real Esate Enterprise Abstract：In order todiscuss the influence and mechanism between the safety atmosphere and the staff’s safety behavior of the real estate enterprise.The study uses questionnaire survey research method,the objects of the investigation are 200 employees in one real estate enterprise.The results indicate that safety climate is positively related to safety behavior.The “work environment” dimension and “safety consciousness” dimension have direct and positive influence on safety behavior. The “management commitment ” dimention has no direct influence on safety behavior,but“management commitment”affects safety behavior positively through work environment and safety consciousness. Key words:management commitment; safety consciousness; safety behavior; structural equation model
外文文献及翻译
外文文献及翻译 题目：利用固定化过氧化氢酶 回收纺织品漂染的废水 专业食品科学与工程 学生姓名梁金龙 班级B食品072 学号0710308119 指导教师郑清
利用固定化过氧化氢酶回收纺织品漂染的废水 Silgia A. Costa1, Tzanko Tzanov1, Filipa Carneiro1, Georg M. Gübitz2 &Artur Cavaco-Paulo1,? 1纺织工程系, 米尼奥大学, 4810吉马尔, 葡萄牙 2环境生物技术系, 格拉茨技术大学, 8010格拉茨, 奥地利 ?作者联系方式(Fax: +351 253 510293; E-mail: artur@det.uminho.pt) 关键词：过氧化氢酶的固定化，酶稳定，过氧化氢，纺织印染 摘要 过氧化氢酶固定在氧化铝载体上并用戊二醛交联，在再循环塔反应器和CSTR反应器中研究贮存稳定性，温度和pH值对酶的活性。固定化酶的在的活性维持在44％，pH值11（30?C），对照组是活性为90％，pH值7（80?C），过氧化氢酶固定化的半衰期时间被提高到2小时（pH12，60?C）。用过氧化氢漂白织物后，洗涤过程中的残留水被固定化酶处理，可以用于再次印染时，记录实验数据。 1 序言 由于新的法规的出台，从生态经济的角度来看（Dickinson1984年），对于纺织行业中存在的成本和剩余水域的污染问题，必须给予更多的关注。过氧化氢是一种漂白剂，广泛应用于工业纺织工艺（Spiro & Griffith1997年）。在去除H2O2时，会消耗大量的水和能源（Weck 1991, St?hr & Petry 1995），以避免对氧气敏感的染料（Jensen 2000）产生后续问题。过氧化氢酶可用于降低过氧化氢的含量（Vasudevan & Thakur 1994, Emerson et al. 1996），从而减少水分消耗或方便回收印染洗涤液。过氧化氢酶的使用主要问题出在漂白时温度和清洗液碱度过高。以前，我们试图通过筛选新的嗜热嗜碱的微生物（Paar et al. 2001）或使用不同的酶稳定剂（Costa et al. 2001）来解决此问题。但是染料与蛋白质之间的潜在相互作用（Tzanov et al. 2001a, b）表明，可溶性过氧化氢酶的使用是不恰当的。固定化过氧化氢酶的使用还有一种选择(Costa et al. 2001, Amar et al. 2000)。在这项研究中，我们对氧化铝进行共价固定并使用戊二醛作为交联剂，这种方法在商业中得到验证。本项研究的目的就是探讨过氧化氢酶的固定化动力学，及其稳定性和工艺条件，这将使我们能够应用此系统，以处理可能被用于清洗染色的反复使用的酒。 2 材料和方法 2.1 酶 Terminox（EC1.11.1.6），50L以上，由AQUITEX- Maia提供，葡萄牙产。 2.2 过氧化氢酶的固定化 取Al2O3颗粒或薄片（Aldrich），直径分别为3和7毫米，在45摄氏度下，先经浓度4%的γ-氨丙基三乙氧基硅烷(Sigma)烷基化，再放入丙酮中浸泡24小时。用蒸馏水洗涤硅烷化载体后，放入浓度为2％戊二醛水溶液中室温下浸泡2小时（Aldrich），重复清洗一次并在60?C下干燥1小时。取五克的烷基化载体，室温24?C下浸泡在25毫升粗酶制剂中（Costa et al. 2001）。得出，每克Al2O3
【9A文】中央文献重要术语英文翻译
中央文献重要术语译文发布 区域协同发展 coordinateddevelopmentbetweenregions 城乡发展一体化 urban-ruralintegration 物质文明和精神文明协调发展 ensurethatcultural-ethicalandmaterialdevelopmentprogresstogether 军民融合发展战略 militarR-civilianintegrationstrategR 经济建设和国防建设融合发展 integrateddevelopmentoftheeconomRandnationaldefense 京津冀协同发展 coordinateddevelopmentoftheBeijing,Tianjin,andHebeiregion 综合立体交通走廊 multimodaltransportcorridor 居住证制度 residencecardsRstem 财 政 转 移 支 付 同 农 业 转 移 人 口 市 民 化 挂 钩 机 制 mechanismlinkingthetransferpaRmentsalocalgovernmentreceivestothenumberofformerruralres identsgrantedurbanresidencRinitsjurisdiction 城 镇 建 设 用 地 增 加 规 模 同 吸 纳 农 业 转 mechanismlinkingincreasesintheamountoflanddesignatedforurbandevelopmentinalocalitRtothe numberofformerruralresidentsgrantedurbanresidencRthere
英文文献及翻译
附件：英文文献及翻译 英文文献 The Importance of Auditing Professional Judgment and Its Application in Auditing Practice LIU Huihe Henan Institute of Engineering, Zhengzhou, Henan 450000 1.Importance of auditing professional judgment Since the reform and opening up, with the development of economy, the further improvement of the market economy system and the establishment of the modem enterprise system, more and more attention has been paid to the auditing profession. With the integration of the world economy, China’s economy is gradually moving towards the world, the audit staff need to have a high level of audit quality, audit staff also face greater challenges. In today’s society more need to have a good reputation of the audit staff, and good reputation is a long-term accumulation of audit work, the success or failure of the audit depends on the quality of the audit professional judgment. Therfore, we need to re-examine the importance of audit judgment, pay attention to and scientific and rational use audit professional judgment, improve the level of audit judgment, improve audit quality, reduce audit risk. 1.1The importance of auditing professional judgment to the
英文翻译(论文摘要)
河北联合大学轻工学院英文翻译 河北联合大学轻工学院 毕业设计缩写大摘要及英文翻译 设计题目： 学部： 专业： 班级： 姓名： 指导教师： 2011年06月11 日
毕业设计缩写大摘要 机械制造业是国民经济的基础产业，国民经济中的任何行业的发展，必须依靠机械制造业的支持并提供装备。它的发展直接影响到国民经济各部门的发展，也影响到国计民生和国防力量的加强，因此，各国都把机械制造业的发展放在首要位置。 一个企业的人力资源管理是和一个企业的经营战略、组织结构体系与文化价值观紧密相连的，而卓越的人力资源管理更是是其他企业最难以复制、模仿的。因此，在竞争如此激烈的今天，通过人力资源管理来创造竞争优势就成为企业竞争战略中的一个重要部分。机械制造业企业的人力资源管理同样是企业管理的重要组成部分,合理有效的进行企业的人力资源管理是机械制造企业成功的有力保证。如何利用人力资源管理来帮助机械制造企业适应竞争和提高竞争力，不断提高制造水平，是每个机械制造企业都要思考的问题。本文通过结合国内外人力资源管理的相关理论知识，我国机械制造业的相关资料以及在实习中了解到的相关信息，针对我国机械制造企业人力资源管理的现状及存在的问题进行研究。通过本课题的研究，将对我国的机械制造企业，尤其是一些中小型企业，在进行人力资源管理时产生一些现实的指导意义，使得我国的机械制造业在新的历史时期，新的形势下，能够不断提高国际竞争力，提高制造水平。 近年来，我国的制造工业获得持续高速的发展，无论制造业总量还是制造业技术水平都有很大的提高，中国已成为名符其实的世界制造大国。虽然机械制造业从产品研发、技术装备和加工能力等方面都取得了很大的进步，但具有独立自主知识产权的品牌产品却不多，整体来说中国的机械制造业还是比较落后，高质量的、技术先进的机械设备计本上全部是国外企业提供的。随着社会的发展，人们的生活水平日益提高，各个方面的个性化需求越加强烈。作为已经深入到各行各业并已成为基础工业的机械制造业面临着严峻的挑战。 然而目前我国制造业总体的人力资源状况不佳，人力资源管理水平落后。中国机械制造业企业要从“中国制造”向“中国创造”转变需要大量的具有创新精神的科学技术人才、复合型的高级管理人才、高级技师、技师等熟练技术人才。在我国机械制造企业人力资源管理中还存在一些问题。主要包括对人力资源认识存在误区；缺乏现代人力资源管理的理念；人力资源资源使用率低；人力资源管理人员整体素质不高；缺乏科学合理的绩效考评与激励机制；人力资源管理规划缺乏科学性等六个方面。