工程测量英语常用词汇
测量英语常用词汇
一、工程测量词汇与短句:
Absolute elevation 绝对高程
adjusted elevation 平差高程
Relative elevation 相对高程
alignment 准直
alignment error 校正误差
/alignment stake 定线桩pile
allowed error 容许误差
/artificial error 人为误差
assumed elevation 假定高程
测量放样setting out/
轴线放样setting out of axis/
background 背景
/back sight 后视
base measurement 基线测量
/base-line 基线
/bearing mark 方位标记
bench level 水准点高程
/bench mark(BM) 水准点,基准点
calculation error 计算误差
/ check 检核
/ check measuring point 校核测点
/check of leveling line 水准路线检测
/ ground elevation 地面标高
construction survey施工测量
/contour等高线
/extra contour 辅助等高线
contour interval 等高距
/ slope distance 斜距
/control line/net/point 控制线,控制网,控制点coordinate 坐标
/coordinate grid 坐标网格
correction 改正数
/detection 检测
/ deviation 误差
counter-clockwise 顺时针方向
/design coordinate 设计坐标
design elevation设计高程
/detail survey详测
/difference in elevation高差
elevation of sight 视线高程
/ elevation of line of sight 视线标高
error误差
/error control误差控制
/error correction 误差
foresight 前视
/ front-view 前视图
height of instrument 仪器高程
/stability of instrument 仪器稳定性
horizontal angle水平角
/horizontal deviation 水平偏差
/horizontal distance 水平距离
/horizontal line 水平线
land smoothing survey 土地平整测
/lay out/location/locating 放样
solid error 固定误差
/observation error 观测误差
/overall error 总误差
instrument parallax 仪器视差
scale比例尺
/scale accuracy 比例尺精度
/scale error 比例误差
/spirit level 水准器
set up the instrument安置仪器
/setting out of axis 轴线放样
/site survey 现场勘测
surveying sheet 测量图
/surveying stake 测量标桩
/surveyors pole标杆
staking-out work现场定线
/state plane coordinate system /国家平面坐标系统
triangulation 三角测量
/tripod 三角架
/turning point 转点
uniform slope 等坡面
/vertical control net 高程控制网
/vertical control survey 高程控制测量
visual observation 目测
/zero elevation 零高程
closure traverse 闭合导线
把仪器架到这个点上,把仪器收到车里Set up the instrument over this control point/ take it back into the pick-up
把棱镜立直不要动Hold the prism straight and stable
在这附近有控制点吗? Is there any controlling point around?
测这条路的横段面,每25m一个断面Make a survey of road transverse surface/cross section every 25 meters
我们给的高程是垫块的顶部高程这高程是开挖高程
The elevation is for excavation/the top of the kicker
请把推土机开走
它挡住我的视线
我们看不见棱镜了
Please move away the bulldozer; it blocks my sight of the prism
用白油漆在
U-drain
写里程桩号
Write down the chainage number on U-drain with white paint
我们仪器里没有这些点的坐标要一个一个的输入进去
My instrument does not have the coordinates of these points; we have to put in these figures one by one.
这个桩的位置不是很准确需要改一下
The location of this stake/peg is not right; we have to correct it.
用长皮尺测量一下这路的宽度
Measure the width of road with tape measure
从这点到路边的大概距离是多少?
What is the general/rough distance between this point and the road sideline?
从这点到路的中心线的估计高差是多少?
What is the estimated elevation difference from this point to the central line?
把彩条系到桩子上
Tie/fasten the ribbon to pegs/stakes
这个坡的坡度应该是很缓的
这个坡的坡度是1:3
The gradient of this slope should be flat/ is one in three.
用警示条和竹竿把这个区域封上以免毁坏标杆
测量学各章词汇及英文对照
测绘Surveying
测定survey layout setting-out survey
普通测量学general survey
大地测量学geodetic survey
摄影测量与遥感学photogrammetry and remote sensing
海洋测绘学marine surveying
工程测量学engineering surveying
制图学cartography
测量基准面datum plane
大地水准面geodetic surface; geiod
铅垂线plumb-line
水准面level plane
参考椭球面reference ellipsoid
旋转椭球rotating ellipsoid
大地坐标系Geodetic coordinate system
大地经度earth longitude(B)
大地纬度earth latitude (L)
空间直角坐标系spatial rectangular coordinates
独立平面直角坐标系independent plane rectangular coordinate system
高斯平面直角坐标系Gauss plane rectangular coordinate system
高斯投影Gaussian projection
高程系统height system
高程原点height datum
曲率curvity/curvature
平面控制测量The plane control survey
高程控制测量Elevation control survey
第二章
水准测量Leveling Surveying
水平视线horizontal sight
高程elevation height
高差Difference of height
后视backsight
前视foresight
水准尺Leveling rod
水准仪The Level(instrument)
水准点Bench Mark
尺垫turning point plate
微倾式水准仪slightly leaning level(instrument)
望远镜telescope
水准气泡bubble
管水准器tube level bubble
圆水准器round level bubble
基座base
物镜objectives 目镜eyepieces 聚焦透镜the focus lens 十字丝分划板the cross partition board 目镜调焦螺旋eyepiece optical screw
物镜调焦螺旋objectives optical screw
管水准器tube level bubble
圆水准器round level bubble
三脚架The tripod
视差parallax
视准轴Collimation axis
水准点Bench mark
水准路线Leveling line
闭合水准路线Alosed level route:A loop level route 附合水准路线A line level route:Annexed level route, 支水准路线An open-ended level route:Spur level route. 转点Turning point
闭合差misclosures
闭合差允许误差:Misclosure allowable error
检核check
校正Calibration
自动安平水准仪Autometic level
补偿器compensator
铟瓦水准尺Invar rod
电子水准仪Electronic level
条码尺Barcode rod
误差:error
微倾螺旋2. Slightly sloping spiral
分划板护罩Partition board shield
目镜3. Eyepiece
物镜对光螺旋The objective convergence spiral
制动螺旋Braking spiral
微动螺旋Fine-tune the spiral
底板Base
8. 三角压板Triangle linking piece
9. 脚螺旋Feet spiral:
10. Spring cap弹簧冒
11. The telescope望远镜
12 . Objective 物镜
13. Tube level管水准器
14 .Round level manometers圆水准器
15. Connections small screws: 连接小螺丝
16. Shaft block: 轴座
第三章
角度测量Angles surveying
水平角Horizontal angle(HA)
竖直角The vertical angle(VA)
光学经纬仪optical theodolite(transit)
照准部Collimation device
望远镜Telescope,
竖直度盘vertical dish, vertical circle
水准管Level bubble
读数设备Readings equipment
水平度盘Horizontal dish
测微尺Micro-distance measuring sensor
垂球Plumb bob
对中centering
整平level
光学对中器optical centering device
侧回法Observation set method
方向观测法direction observation method
竖直角指标误差Index error of vertical angle
竖轴The vertical axis VV
水平轴The horizontal axis HH
望远镜视准轴The telescope collimation CC
对中误差Plummet error
目标偏心差Target eccentric error
电子经纬仪Electronic theodolite
第四章
距离测量Distance surveying
直线定向line orientation
钢尺Steel tape
定线Fixing line
视距测量Stadia measurement
电磁波测距仪Electromagnetic rangefinder
微波测距仪Microwave rangefinder
光电测距仪Photoelectric rangefinder
激光测距仪Laser rangefinder
红外测距仪Infrared rangefinder
相位测距仪Phase type rangefinder
脉冲式测距仪Pulsed rangefinder
全反射棱镜Total reflecting prisms
真北方向True north direction
磁北方向Magnetic north direction
坐标北方向Coordinates north direction
方位角Azimuth
真方位角True azimuth (A)
磁方位角Magnetic azimuth(Am)
坐标方位角Grid azimuth(α)
磁偏角Magnetic declination
子午线收敛角meridian convergence
罗盘compass
第五章
全站仪TOTAL STATION
水平制动、微动螺旋Horizontal motion clamp, Horizontal tangent screw 光学对中器Optical plummet telescope
粗瞄镜Sighting collimator
物镜Objective lens
整平脚螺旋Leveling screw
竖直制动、微动螺旋Vertical motion clamp, Vertical tangent screw
目镜Telescope eyepiece
管水准器Plate level
圆水准器Circle level
单棱镜组Single prism system
超站仪(Smart station) Automatic total station , ultra station instrument 交会测量Resection measurement
放样测量Setting-out survey
对边测量Missing Line Measurement (MLM)
悬高测量Remote Elevation Measurement (REM)
第六章
测量平差:Surveying Adjustment
测量误差:surveying errors
系统误差:Systematic error
偶然误差:random error;accidental error
最或是值:The most probable value
多余观测:Redundant observation
算术平均值:arithmetic average ;Arithmetic means
精度指标:Accuracy index
中误差:Root mean square error (RMSE)
允许误差:Allowable error
相对误差:Relative error
观测值改正数:Observation correction value
误差传播定律:Law of errors propagation
全微分:Total differential
权:Weight
加权平均值:The weighted average (mean)
权倒数传播定律:Weight reciprocal propagation law
第七章
控制测量:Control surveying
碎部测量:detailed surveying
平面控制网:Plane control network
高程控制网:Elevation control network
小区域控制网:Small area control network
控制点:control points
国家控制网:State Control net
GPS测量:GPS surveying
导线测量:traverse surveying
三角测量:trigonometric survey
三边测量:trilateral surveying
光电测距仪:photoelectric rangefinder
闭合导线:Closed traverse;
附和导线:Connecting traverse;
支导线:Open traverse.
野外勘察:Field reconnaissance
坐标方位角:Coordinates azimuth
交会定点:Intersection fixed-point
测边交会:Side-surveying intersection
第八章
大比例尺地形图测绘:Topographic Surveying and Mapping in Large Scale
地形:Terrain
地物:Ground feature
地貌:Landscape
比例尺:Scale
依比例符号:Proportional symbols
非比例符号:Disproportional symbols
半比例尺符号(线性符号):Semi- Disproportional symbols (Linear symbols ) 地形图图式:map schemata
地貌符号:Landscape symbols
等高线:Contour line
注记符号:Note symbols
等高距:contour interval
等高线平距:contour horizontal distance
山头:Peak
洼地:depressions
示坡线:slope line
山脊:Ridge 与山谷: valley
合水线:Close waterline
分水线:watershed line
鞍部(垭口):Saddle
欢迎您的下载,
资料仅供参考!
致力为企业和个人提供合同协议,策划案计划书,学习资料等等
打造全网一站式需求
机械类常用英语词汇大全
机械类常用英语词汇大全 一字螺丝批 slot type screwdriver 一点透视 one-point perspective 二画 二合一黏合剂 epoxy resin adhesive 二合胶;混合胶 epoxy glue 二维的;平面的 two-dimensional 二进制 binary 二极管;整流子 diode 二号螺丝攻 second tap 二路开关 two-way switch 十进制的;公制的 metric 人工制品 artefact 人造板 man-made board 人体工程学 ergonomics; human engineering 人体尺寸 human dimension 人体测量学 anthropometry; anthropometrics 刀片 blade 刀身 blade 刀具 tool 刀具溜座 carriage 刀柱 tool post 刀架 tool rest 刀架底座 tool rest bracket 刀座帷;床鞍 apron 刀座鞍;溜板座 saddle 力 force 力三角形 triangle of force 力平行四边形 parallelogram of force 力多边形;多边形力学 polygon of force 力的分解 force resolution 力架;亮漆 lacquer 力矩 moment 力偶 couple 力矩定律 law of moment 力-距离图表 force-distance graph 力图 force diagram 力线 line of force 力点 effort 十字榫 cross halving joint 十字螺丝 Philip s head screw 十字螺丝批 Philip s type screwdriver 丁字尺;T 尺 tee square 三画 三爪夹头 three-jaw chuck 三角尺 set square 三角形结构系杆 triangulation tie 三角锉 triangular file 三维的;立体的 three-dimensional 三氯甲烷;哥罗芳 chloroform 三聚氰胺;蜜胺 melamine 三点透视 three-point perspective 上油漆 painting 上釉 enamelling 凡立水 varnish 叉形顶尖 fork centre 口罩 mask 士力;虫漆 shellac 士巴拿;扳手 spanner 大芯夹板;宽条芯夹板 blockboard; solid corestock-laminated board 大量制造 mass production
英语新闻词汇大全(附新闻词汇精选)
英语新闻词汇大全 accredited journalist n. 特派记者advertisement n.广告. advance n.预发消息;预写消息 affair n.桃色新闻;绯闻 anecdote n.趣闻轶事 assignment n.采写任务 attribution n. 消息出处,消息来源 back alley news n. 小道消息backgrounding n.新闻背景 Bad news travels quickly. 坏事传千里。banner n.通栏标题 beat n.采写范围 blank vt. "开天窗" body n. 新闻正文 boil vt.压缩(篇幅) box n. 花边新闻 brief n. 简讯 bulletin n.新闻简报 byline n. 署名文章 caption n.图片说明 caricature n.漫画 carry vt.刊登 cartoon n.漫画 censor vt. 审查(新闻稿件),新闻审查chart n.每周流行音乐排行版 clipping n.剪报 column n.专栏;栏目 columnist n.专栏作家
continued story 连载故事;连载小说contributing editor 特约编辑 contribution n.(投给报刊的)稿件;投稿contributor n.投稿人 copy desk n.新闻编辑部 copy editor n.文字编辑 correction n.更正(启事) correspondence column读者来信专栏correspondent n.驻外记者;常驻外埠记者cover vt.采访;采写 cover girl n. 封面女郎 covert coverage 隐性采访;秘密采访 crop vt.剪辑(图片) crusade n.宣传攻势 cut n.插图vt.删减(字数) cut line n.插图说明 daily n.日报 dateline n.新闻电头 deadline n.截稿时间 dig vt.深入采访;追踪(新闻线索);“挖”(新闻) digest n.文摘 editorial n.社论 editorial office 编辑部 daily 日报 morning edition 晨报 evening edition 晚报 quality paper 高级报纸 popular paper 大众报纸 evening paper 晚报
机械专业英语词汇汇总
机械专业英语词汇(大全) 金属切削metal cutting 机床machine tool 金属工艺学technology of metals 刀具cutter 摩擦friction 联结link 传动drive/transmission 轴shaft 弹性elasticity 频率特性frequency characteristic 误差error 响应response 定位allocation 机床夹具jig 动力学dynamic 运动学kinematic 静力学static 分析力学analyse mechanics 拉伸pulling 压缩hitting 剪切shear 扭转twist 弯曲应力bending stress 强度intensity 三相交流电three-phase AC 磁路magnetic circles 变压器transformer 异步电动机asynchronous motor 几何形状geometrical 精度precision 正弦形的sinusoid 交流电路AC circuit 机械加工余量machining allowance 变形力deforming force 变形deformation 应力stress 硬度rigidity 热处理heat treatment 退火anneal 正火normalizing 脱碳decarburization 渗碳carburization 电路circuit 半导体元件semiconductor element 反馈feedback 发生器generator 直流电源DC electrical source 门电路gate circuit 逻辑代数logic algebra 外圆磨削external grinding 内圆磨削internal grinding 平面磨削plane grinding 变速箱gearbox 离合器clutch 绞孔fraising 绞刀reamer 螺纹加工thread processing 螺钉screw 铣削mill 铣刀milling cutter 功率power 工件workpiece 齿轮加工gear mechining 齿轮gear 主运动main movement 主运动方向direction of main movement 进给方向direction of feed 进给运动feed movement 合成进给运动resultant movement of feed 合成切削运动resultant movement of cutting 合成切削运动方向direction of resultant movement of cutting 切削深度cutting depth 前刀面rake face 刀尖nose of tool 前角rake angle 后角clearance angle 龙门刨削planing 主轴spindle 主轴箱headstock 卡盘chuck 加工中心machining center
铁路专业英文词汇
铁路专业词汇 一、铁路;铁道 railway railroad 铁路线 railway line; railroad line 铁路网 railway network; railroad network 铁道科学 railway science 铁路技术 railway technology 铁路等级 railway classification 国有铁路 national railway; state railway 地方铁路 local railway; regional railway 私有铁路 private railway 合资铁路 joint investment railway; jointly owned railway 标准轨铁路 standard-gage railway 窄轨铁路 narrow-gage railway 米轨铁路 meter-gage railway 宽轨铁路 broad-gage railway 单线铁路 single track railway 双线铁路 double track railway 多线铁路 multiple track railway 重载铁路 heavy haul railway 高速铁路 high speed railway 电气化铁路;电力铁路 electrified railway;electric railway 干线铁路 main line railway; trunk railway 市郊铁路 suburban railway 地下铁道;地铁 subway; metro; underground railway 工业企业铁路 industry railway 矿山铁路 mine railway 轻轨铁路 light railway; light rail 高架铁路 elevated railway 单轨铁路;独轨铁路monorail;monorail railway 磁浮铁路magnetic levitation railway;maglev 森林铁路 forest railway 山区铁路 mountain railway 既有铁路 existing railway 新建铁路 newly-built railway 改建铁路 reconstructed railway 运营铁路 railway in operation; operation;operating railway 专用铁路 special purpose railway 干线 trunk line; main line 支线 branch line 铁路专用线 railway special line 货运专线 railway line for freight traffic;freight special line; freight traffic only line 客运专线 railway line for passenger traffic;passenger special line; passenger traffic only line 客货运混合铁路railway line for mixed passenger and freight traffic 铁路运营长度;运营里程 operation length of railway; operating distance; revenue length 列车运行图 train diagram 铁路建筑长度 construction length of railway 区间 section 区段 district 轨距 rail gage; rail gauge 轮重 wheel load 轴重 axle load 最大轴重 maximum allowable axle load 限制轴重 axle load limited 限界 clearance; gauge 限界图 clearance diagram 铁路建筑限界railway construction clearance; structure clearance for railway;
新闻中常见英语词汇
一.国际事务: negotiations,delegate,delegation,summit 峰会 charter n. 特许状,执照,宪章 pledge n. 诺言,保证,誓言,抵押,信物,保人,祝愿vt. 许诺,保证,使发誓,抵押,典当,举杯祝……健康 vt. 特许,发给特许执照 promote peace 促进和平 boost economic co-op 加强经济合作 make concession/compromise 作出妥协 pass a resolution 通过决议 sanction n. 核准,制裁,处罚,约束力 vt. 制定制裁规则,认可,核准,同意 default n. 违约,不履行责任,缺席,默认值 vt. 疏怠职责,缺席,拖欠,默认 vi. 疏怠职责,缺席,拖欠,默认 veto a bill 否决议案 break the deadlock 打破僵局 a scientific breakthrough 科学突破 an unexpected outcome 出乎意料的结果 sign/ratify an accord/deal/treaty/pact/agreement 签署协议diplomatically isolated country 在外交上被孤立的国家diplomatic solutions 外交解决方案 hot spot 热点 take hostilities toward..... 对……采取敌对态度 ethnic cleansing 种族排斥 refugee,illegal aliens 非法移民 mediator 调解员 national convention 国民大会 fight corruption 反腐败 corrupted election 腐败的选举 peace process 和平进程 give a boost to... 促进 booming economy 促进经济发展 mutual benefits/interests 双赢 Defense Minister,evacuate,flee from Pentagon 五角大楼impose/break a deadline 规定/打破最后期限 retaliate 报复 banking reform 金融改革 commissioner 代表 go bankrupt 破产 file for bankruptcy 提出破产 deputy 代表
机械专业英语高频词汇讲解
机械专业英语高频词汇 metal cutting 金属切削 machine tool 机床 technology of metals金属工艺学 cutter 刀具 friction 摩擦 link 联结 drive/transmission 传动 shaft 轴 elasticity 弹性 frequency characteristic 频率特性 error 误差 response响应 allocation 定位 jig 机床夹具 term 语术 d ynamic 动力学 k inematic运动学 s tatic 静力学 a nalyse mechanics 分析力学 p ulling 拉伸 s hear 剪切 t wist 扭转 b ending stress 弯曲应力 i ntensity 强度 t hree-phase AC 三相交流电 m agnetic circles 磁路 t ransformer变压器 a synchronous motor 异步电动机 g eometrical 几何形状 p recision 精度 s inusoid 正弦形的 h itting压缩 A C circuit 交流电路 m achining allowance 机械加工余量 d eforming forc e 变形力 d eformation 变形 s tress 应力 r igidity 硬度 r igidity 刚度 h eat treatment 热处理 d ecarburization 脱碳 c ircuit 电路
f raising铰孔 semiconductor element 半导体元件 f eedback 反馈 g enerator 发生器 D C electrical source直流电源 g ate circuit 门电路 l ogic algebra//////algorithm逻辑代数 e xternal grinding 外圆磨削 internal grinding内圆磨削 p lane grinding 平面磨削 c arburization 渗碳 gearbox 变速箱 c lutch 离合器 r eamer铰刀 t hread processing 螺纹加工 s crew 螺钉 m ill 铣削 m illing cutter 铣刀 p ower 功率 w orkpiece 工件 g ear machining 齿轮加工 g ear 齿轮 m ain movement 主运动 d irection of main movem 主运动方向ent d irection of feed进给方向 f eed movement 进给运动 r esultant movement of fe 合成进给运动ed r esultant movement of cut 合成切削运动ting d irection of resultant cutting 合成切削运动方向motion c utting depth 切削深度 r ake face 前刀面 n ose of tool刀尖 r ake angle 前角 c learance angle 后角 p laning 龙门刨削 s pindle 主轴 h eadstock主轴箱 c huck 卡盘 m achining center 加工中心 l athe tool 车刀 l athe 车床 b ore 钻削镗削 t urning车削 g rinder 磨床
英语新闻常用词分类词汇表
政治 常见政治问题新闻词汇 ●Sanction制裁 ●Anarchy无政府状态 ●Ballot选票 ●Boycott联合抵制 ●Truce休战 ●Activist激进分子 ●Asylum政治庇护 ●Bill议案 ●Violate违反 ●Treaty协定 ●Parliament国会 ●House of commons下议院 ●Senate参议院 ●Congressman国会/众议院议员 ●Court法庭[院] ●House of lords上议院 ●Congress(美国等国的)国会、议会●Senator参议员 ●Legislature立法机关、立法机构 ●Procurator检察官 ●Security forces安全部队 ●Campaign运动选举 ●Cease-fire停火●Armed forces武装部队 ●Expel驱逐,放逐 ●Cabinet内阁 ●Casualty伤亡 ●Diplomatic tie外交关系 ●Ambassador大使,使节 ●Inflation通话膨胀 ●Reject否决 ●Statement声明 ●Interfere干涉 ●Unseat罢免 ●Protest示威 ●Democracy民主 ●Proposal提议 ●Domestic affairs内政 ●Resignation辞职 ●Impeach弹劾 ●Insurgent造反者,反抗国内政权的人●Multi-party elections多党选举 ●Amnesty特赦 ●Curfew宵禁 ●Anarchism无政府主义 ●Ballot选举票,投票,票数,投票 常见政治头衔新闻词汇 ●President总统 ●Premier总理 ●Secretary of state国务卿●Prime minister首相 ●Chief executive行政长官●Deputy president副总统●Foreign minister外长 ●Finance minister财长 ●Secretary-general秘书长●Chairman主席 新闻中出现的中国时政的词汇 ●Rapid economic growth快速经济增长 ●Disparate development发展不平衡 ●Flood-prevention project防洪工程 ●Building redundant project重复建设 ●Work contracted to households包干到户 ●Strive for a relatively comfortable life奔小康 ●Lighten the burden on the peasant(farmers)减轻农民负担●A constructive strategic partnership建设性战略伙伴关系 外交用词 ●Ambassador大使●Diplomacy外交●Consulate领事馆,领事任期,领事 的职位
常用新闻英语词汇
11.常用新闻英语词汇. 政治、法律、外交 1. Abortive coup attempt流产政变 2. Absent trial缺席审判 3. Absentee voting缺席投票 1 4. Absolute majority绝对多数 5. Absolute monarchy君主专制政体 6. Abstain from voting放弃,不投票 7. Abstention弃权 8. Accord协定,一致 9. Accredited journalist特记者 10. Acting president代总统 11. Action platform行动纲领 12. Action policy行动方针,实施方针 13. Administration party执政党 14. Administrative authorities行政当局 15. Administrative injunction行政命令 16. Administrative policy speech施政演 17. Advanced countries发达国家 18. Advisory body顾问团 19. Advisory committee咨询委员会 20. Agenda会议事项,议事日程 21. Agreed formula商定的方安 22. Aid-giving agency援助机构 23. Alien domination外国统治 24. Allied powers同盟国 25. All-out ban全面禁止 26. Ambassador-at-large巡回大使 27. Ambassador extraordinary and plenipotentiary特命全权大使 28. Amendment修正案,附加条款 29. Amicable relation友好关系 30. Amnesty 31. Anarchy大赦 32. Annex(领土)合并,兼并 33. Anxious澳、新、美三国防御体系 34. Appeasement policy绥靖政策 35. Appropriate authorities有关当局
机械专业英语复试词汇总结
机械英语词汇大全2 金属切削 metal cutting 机床 machine tool 金属工艺学 technology of metals 刀具 cutter 摩擦 friction 联结 link 传动 drive/transmission 轴 shaft 弹性 elasticity 频率特性 frequency characteristic 误差 error 响应 response 定位 allocation 拉孔 broaching 装配 assembling 铸造 found 流体动力学 fluid dynamics 流体力学 fluid mechanics 加工 machining 液压 hydraulic pressure 切线 tangent 机电一体化 mechanotronics mechanical-electrical integration 气压 air pressure pneumatic pressure 稳定性 stability 介质 medium 数学模型 mathematical model 画法几何 descriptive geometry 机械制图 Mechanical drawing 投影 projection 视图 view 剖视图 profile chart 标准件 standard component 零件图 part drawing 装配图 assembly drawing 尺寸标注 size marking 技术要求 technical
机床夹具 jig 动力学 dynamic 运动学 kinematic 静力学 static 分析力学 analyse mechanics 拉伸 pulling 压缩 hitting 剪切 shear 扭转 twist 弯曲应力 bending stress 强度 intensity 三相交流电 three-phase AC 磁路 magnetic circles 变压器 transformer 异步电动机 asynchronous motor 液压驱动泵 fluid clutch 液压泵 hydraulic pump 阀门 valve 失效 invalidation 强度 intensity 载荷 load 应力 stress 安全系数 safty factor 可靠性 reliability 螺纹 thread 螺旋 helix 键 spline 销 pin 滚动轴承 rolling bearing 滑动轴承 sliding bearing requirements 刚度 rigidity 内力 internal force 位移 displacement 截面 section 疲劳极限 fatigue limit 断裂 fracture 塑性变形 plastic distortion 脆性材料 brittleness material 刚度准则 rigidity criterion 垫圈 washer 垫片 spacer 直齿圆柱齿轮
英语新闻词汇大全
英语新闻词汇大全accreditedjournalistn.特派记者advertisementn.广告.advancen.预发消息;预写消息affairn.桃色新闻;绯闻anecdoten.趣闻轶事assignmentn.采写任务attributionn.消息出处,消息来源backalleynewsn.小道消息backgroundingn.新闻背景Badnewstravelsquickly.坏事传千里。bannern.通栏标题 beatn.采写范围 blankvt."开天窗"bodyn.新闻正文boilvt.压缩(篇幅) boxn.花边新闻 briefn.简讯 bulletinn.新闻简报 bylinen.署名文章 captionn.图片说明caricaturen.漫画 carryvt.刊登 cartoonn.漫画 censorvt.审查(新闻稿件),新闻审查
chartn.每周流行音乐排行版 clippingn.剪报 columnn.专栏;栏目 columnistn.专栏作家continuedstory连载故事;连载小说contributingeditor特约编辑 contributionn.(投给报刊的)稿件;投稿contributorn.投稿人 copydeskn.新闻编辑部 copyeditorn.文字编辑 correctionn.更正(启事) correspondencecolumn读者来信专栏correspondentn.驻外记者;常驻外埠记者 covervt.采访;采写 covergirln.封面女郎 covertcoverage隐性采访;秘密采访 cropvt.剪辑(图片) crusaden.宣传攻势 cutn.插图vt.删减(字数)cutlinen.插图说明dailyn.日报 datelinen.新闻电头 deadlinen.截稿时间 digvt.深入采访;追踪(新闻线索);“挖”(新 闻) digestn.文摘
铁路术语专用英语知识讲解
铁路专用英语 专业词汇中英对照翻译----铁路工程词汇 线路工程railway line engineering 铁路勘测;铁道勘测railway reconnaissance 铁路选线;铁道选线railway route selection;railway location;approximate railway location;location of railway route selection 经济勘察economic investigation 地质调查geological survey;geologic survey 方案比较project comparison 铁路勘探;铁道勘探railway exploration 铁路测量;铁道测量railway survey 线路测量route survey;profile survey;longitudinal survey 曲线测量curve survey 既有线测量survey of existing line;survey of existing railway 铁路线路图;铁道线路图railway map 定线location of line 铁路设计;铁道设计railway design 线路设计track design 平面设计plane design 纵断面设计longitudinal section design 横断面设计transverse section design 曲线设计curve design 车站设计station design 站场设计design of stations and yards 标准设计standard design 线路等级line grade 铁路限界;铁道限界railway clearance 建筑限界construction clearance 设计规范code of design 设计标准design standard 铁路线路;铁道线路railway line 铁路曲线;铁道曲线railway curve 缓和曲线transition curve;easement curve;spiral transition curve 小半径曲线small-radius curve 曲线半径curve radius 曲线超高superelevation on curve;cant;elevation of curve 欠超高inadequate superelevation;deficient superelevation
英语新闻常用词汇大全(免费版)
英语新闻词汇大全accredited journalist n. 特派记者 advertisement n.广告. advance n.预发消息;预写消息 affair n.桃色新闻;绯闻 anecdote n.趣闻轶事 assignment n.采写任务 attribution n. 消息出处,消息来源 back alley news n. 小道消息 backgrounding n.新闻背景 Bad news travels quickly. 坏事传千里。 banner n.通栏标题 beat n.采写范围 blank vt. "开天窗" body n. 新闻正文 boil vt.压缩(篇幅) box n. 花边新闻 brief n. 简讯 bulletin n.新闻简报 byline n. 署名文章 caption n.图片说明 caricature n.漫画 carry vt.刊登 cartoon n.漫画 censor vt. 审查(新闻稿件),新闻审查 chart n.每周流行音乐排行版 clipping n.剪报 column n.专栏;栏目 columnist n.专栏作家
continued story 连载故事;连载小说contributing editor 特约编辑 contribution n.(投给报刊的)稿件;投稿contributor n.投稿人 copy desk n.新闻编辑部 copy editor n.文字编辑 correction n.更正(启事) correspondence column读者来信专栏correspondent n.驻外记者;常驻外埠记者 cover vt.采访;采写 cover girl n. 封面女郎 covert coverage 隐性采访;秘密采访 crop vt.剪辑(图片) crusade n.宣传攻势 cut n.插图vt.删减(字数) cut line n.插图说明 daily n.日报 dateline n.新闻电头 deadline n.截稿时间 dig vt.深入采访;追踪(新闻线索);“挖”(新闻) digest n.文摘 editorial n.社论 editorial office 编辑部 daily 日报 morning edition 晨报 evening edition 晚报 quality paper 高级报纸 popular paper 大众报纸 evening paper 晚报 government organ 官报
机械工程专业英语单词
Lesson 1 Basic Concepts in Mechanics 机械学的基本概念 mechanics n.力学 modify v.修改,调解,变更manageable a.可控制【管理】的 incline v.(使)倾斜 ramp n.斜板,斜坡【道】 slope v.(使)倾斜 friction n.摩擦 roll v.滚动 multiplier n.放大器,乘法器 broom n.扫帚 convert v.转变【化】 handle n.手柄【把】 sweep v.扫荡【描】,掠过efficiency n.效率 gauge vt.测【计】量,校验bearing n.轴承 ideal mechanical advantage 理想的机械效益 neglect vt.忽略Lesson 2 Basic Assumption in Plasticity Theory 塑性理论的基本假设 assumption n.假定 plasticity n.塑性 investigate v.调查,研究deformation n.变形 metal forming process 金属成型工艺【过程】 strain (rate) n.应变【速率】 strength n.强度 stress n.应力 yield stress 屈服应力 flow stress 流动应力 tensile stress 拉【伸】应力compressive stress 压【缩】应力 shear stress 剪【切】应力 geometry n.几何形状 elastic a.弹性的 springback n.回弹 bending n.弯曲,折弯
专业词汇中英对照翻译——铁路工程词汇
专业词汇中英对照翻译----铁路工程词汇 线路工程 线路工程railway line engineering 铁路勘测;铁道勘测railway reconnaissance 铁路选线;铁道选线railway route selection; railway location; approximate railway location; location of railway route selection 经济勘察economic investigation 地质调查geological survey; geologic survey 方案比较project comparison 铁路勘探;铁道勘探railway exploration 铁路测量;铁道测量railway survey 线路测量route survey; profile survey; longitudinal survey 曲线测量curve survey 既有线测量survey of existing line; survey of existing railway 铁路线路图;铁道线路图railway map 定线location of line 铁路设计;铁道设计railway design 线路设计track design 平面设计plane design 纵断面设计longitudinal section design 横断面设计transverse section design 曲线设计curve design 车站设计station design 站场设计design of stations and yards 标准设计standard design 线路等级line grade 铁路限界;铁道限界railway clearance 建筑限界construction clearance 设计规范code of design 设计标准design standard 铁路线路;铁道线路railway line 铁路曲线;铁道曲线railway curve 缓和曲线transition curve; easement curve; spiral transition curve 小半径曲线small-radius curve 曲线半径curve radius 曲线超高superelevation on curve; cant; elevation of curve 欠超高inadequate superelevation; deficient superelevation 未被平衡加速度unbalanced acceleration 竖曲线vertical curve 坡道gradient 坡度grade; gradient;slope 限制坡度ruling grade; limiting grade 坡度折减grade compensation; compensation of gradient; gradient compensation 避难线refuge siding; catch siding 双线插入段double track interpolation 铁路连接线;铁道连接线railway connecting line 隧道内线路line in tunnel 桥头引线bridge approach 站线siding 站线长度length of station line 铁路标志;铁道标志railway sign 警冲标fouling point indicator; fouling post 线路中心线track center line; central lines of track 线间距离;线间距distance between centres of lines; distance between centers of tracks; midway between tracks 线路试验;线路实验track test; road test; running test 路基subgrade 铁路路基;路基;铁道路基railway subgrade; subgrade 软土路基soft soil subgrade 沙漠路基desert subgrade 冻土路基permafrost subgrade 膨胀土路基subgrade in swelling soil zone 路基基床subgrade bed 路堤embankment; fill 高路堤high-fill embankment 路堑cut; road cutting 深路堑deep cutting 路肩road shoulder; subgrade shoulder 边坡side slope 护坡revetment; slope protection; pitching 路基滑动subgrade slip 滑坡防治landslide preventive treatment 路基排水subgrade drainage 塑料排水板plastic drainage board 路基加固subgrade strengthening 土工织物geotextile 挡土墙;挡墙retaining walls 锚定板anchor plate 锚杆anchor bolt 抗滑桩antiskid pile; anti-slide pile; counter-sliding pile 加筋土reinforced earth 植被vegetation 路基防护subgrade protection 防护工程protective engineering 防护林protection forest 防沙sand proof 固沙stabilization of sand 输导砂sediment transport 路侧建筑物roadside structure 排水沟weeper drain;weep drain; drainage ditch; drain ditch 挡风墙wind-shield wall; wind-break wall 隔声墙sound-proof wall 防雪栅snow fence; snow guard 轨道理论track theory 轨道设计track design 轨道参数track parameter 轨距track gauge; rail gage;rail gauge 轨距加宽track gauge widening 轨底坡cant of rail; rail cant 轨道力学track dynamics; track mechanics 轨道强度track strength 轨道阻力track resistance 道床阻力trackbed resistance; ballast resistance 扣固力fastening force 钢轨应力rail stress 轨道承载力track bearing capacity 轨道稳定性track stability; stability of track 轨道试验;轨道实验track test 轮轨关系wheel-rail interaction; wheel-rail relation 轮轨动力学wheel-rail dynamics 轮轨作用力wheel-rail force 轮轨接触wheel-rail contact 接触应力contact stress 轨道结构track structure 轨道track 铁路轨道;轨道;铁道轨道railway track; track 线路上部建筑;轨道track superstructure; track 重型轨道heavy track 宽轨枕轨道broad sleeper track 板式轨道slab track; slab-track 整体道床轨道monolithic roadbed track 防振轨道anti-vibration track 高架轨道elevated track 无缝线路jointless line; continuously welded rail track; jointless track