51单片机控制双色LED点阵显示数字C语言源程序

/***************************************************************************************** *
* 双色LED点阵实验(流动显示1 2 3 4 5 6 7 8 9) *
* *
*13年9月3日 made by musen
******************************************************************************************/


#include

unsigned char code tab[]={0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,}; //列选通控制


unsigned char code digittab[18][8]={

{0x00,0x00,0x3e,0x41,0x41,0x41,0x3e,0x00}, //0

{0x00,0x00,0x00,0x00,0x21,0x7f,0x01,0x00}, //1

{0x00,0x00,0x27,0x45,0x45,0x45,0x39,0x00}, //2

{0x00,0x00,0x22,0x49,0x49,0x49,0x36,0x00}, //3

{0x00,0x00,0x0c,0x14,0x24,0x7f,0x04,0x00}, //4

{0x00,0x00,0x72,0x51,0x51,0x51,0x4e,0x00}, //5

{0x00,0x00,0x3e,0x49,0x49,0x49,0x26,0x00}, //6

{0x00,0x00,0x40,0x40,0x40,0x4f,0x70,0x00}, //7

{0x00,0x00,0x36,0x49,0x49,0x49,0x36,0x00}, //8

{0x00,0x00,0x32,0x49,0x49,0x49,0x3e,0x00}, //9

{0x00,0x00,0x7F,0x48,0x48,0x30,0x00,0x00}, //P

{0x00,0x00,0x7F,0x48,0x4C,0x73,0x00,0x00}, //R

{0x00,0x00,0x7F,0x49,0x49,0x49,0x00,0x00}, //E

{0x00,0x00,0x3E,0x41,0x41,0x62,0x00,0x00}, //C

{0x00,0x00,0x7F,0x08,0x08,0x7F,0x00,0x00}, //H

{0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00}, //I

{0x00,0x7F,0x10,0x08,0x04,0x7F,0x00,0x00}, //N

{0x7C,0x48,0x48,0xFF,0x48,0x48,0x7C,0x00} //中

};

unsigned int timecount1 , timecount2; //定义的变量

unsigned char cntx , cnty ; //cntx列控制数的变量 cnty用来控制 字符与字符之间的切换

void main(void)
{
cnty=0;

while(1)

{
if(cnty<18) //红色
{
P1=0xFF; //列选通都关闭掉
P2=tab[cntx]; // 列线
P0=digittab[cnty][cntx]; // 行线
}
else //绿色
{
P2=0xFF; //红色的列选通都关闭掉
P1=tab[cntx]; // 列线
P0=digittab[cnty-18][cntx]; // 行线
}


//用于控制动态扫描的速度
if(++timecount1>=50)
{
timecount1=0;
if(++cntx>=8) cntx=0;
}


//用于控制动字符间的切换速度
if(++timecount2>=20000)
{
timecount2=0;
if(++cnty>=36)cnty=0;
}

}

}