百事合同中英文

编号：_______________本资料为word版本，可以直接编辑和打印，感谢您的下载

百事合同中英文

甲方：___________________

乙方：___________________

日期：___________________

甲方：百事（中国）有限公司

Party A: Pepsi International Co, Ltd. （China ）

乙方：东莞利士包装有限公司

Party B: Dongguan Rex Packaging Co, Ltd.

丙方：

Party C 乙方有能力并愿意按甲方的图纸， 式样书等所要求的4加仑塑料包装桶的模具

（包含瓶 盖和瓶身）之技术规格标准来寻找模具制造商（丙方） ，并有责任要求丙方按照甲方要求的 技术规格制造模具.在甲乙丙三方协定的期限内，丙方须负责从制作到验收模具的全过程， 乙方须跟进模具的制作过程及自验收之日起全权负责模具的保管，甲方对模具拥有所有权， 在本协议限定的条款内授权乙方使用。三方在友好平等协商的基础上，达成如下协议：

Party B has the ability and willingness to search the mould made supplier （party C ） exactly

according to Party A's the technical drawings and standard request of the four gallons plastic

package barrel mould. Party B has the obligation to require party C to make the mould according to Party A's technical standard.

During the agreement time, party C should be in charge of the whole process of the mould making from researching and developing to the Inspection and acceptance of the mould. party B should

follow up the whole process of the mould making and should be in charge of the mould safekeeping from the Inspection and acceptance date of the mould, party A has the proprietary rights of the mould and authorized the use right of the mould to party C according to the terms of the agreement. On the basis of friendly equal and negotiate principle, three parties reach agreements as below:

1. 总则 General Principle

1.1合同的目的

甲乙丙三方必须遵守信誉， 如实地签署合同中规定的各项条款， 以便三方形成公平持久

的业务。 All the three parties should be honest and keep faiths and sign the agreement terms truthfully in order to establish equal and long-term business relations.

1.2 权利和义务的转让 transfer of the rights and obligations

未经乙方，丙方的书面承认之前，甲方不得擅自对第四方进行在本合同中所有条款所规 定的权利义务的全部或部分， 做转让，提供担保或进行其他任何处理行为。 With out the written admission issued by party B and party C, party A has no right to transfer its rights and duties to

another or guarantee and any processing behaviour under this contract in whole or in part to a fourth party,.

2. 模具的材质 material of the mould

瓶模：王牌 45#钢：bottle mould: trump steel 45#

盖模：718H 钢：cover mould: steel 718H

2.1 图纸，式样书（见附件一）的事先确认

Confirmation of the drawing and reference book （refer to annex 1）

由甲方提供样品桶，乙方根据样品桶于 4月12日出具产品图纸，丙方根据样品桶及图 纸制（以下称甲方） （below short as party A ） （以下称乙方） （below short as party B ）

（以下称丙方）

作模具: The sample bucket offered by party A, party B should issue the drawing on 12th April according to the sample bucket, party C should made the mould according the sample and the drawing .

乙方出具图纸需甲方签名确认后，乙方及丙方在开始生产之前，应对已记载其货物的质

量，规格，材质，性能等的图纸，式样书进行检讨后，按照要求进行制造。The drawing should be confirmed and signed by party A, party B and party C should study the drawing and reference book that record the quality specification material and performance, then made the mould as requested.

3. 模具的质量标准quality standards of the mould

瓶模使用寿命：壹百万次the service life of the bottle mould: a million times 盖模使用寿命：壹百万次the service life of the bottle mould: a million times

4. 模具的价格price of the mould

瓶模：￥ 150,000 （含6%增值税）bottle mould: RMB150,000 （including 17% V AT）盖模：￥ 290,000 （含6%增值税）cover mould: RMB290,000 （including 17% V AT）

模具委托开发，保管及使用协议书-Page 2of 5

5. 模具的数量quantity of the mould

5.1盖子的模具cover mould

瓶盖模具为一套，型腔为一模出四腔。

Cap moulds for a set, cavity exactly out four cavity for.

5.2瓶身的模具bottle mould

瓶身模具为一套，型腔为一模出一腔。

The bottle for a set of mould, for exactly a cavity chamber

6. 模具的验收Inspection and acceptance of the mould

乙方在得到丙方的验收通知后，必须及时通知甲方并和甲方商定日期一起对模具进行验

收。乙方负责所有验收过程并保证质量符合甲方所规定的质量要求。甲方监督整个验收过程。

7. 模具的首次试产trial-production of the mould

甲方委托乙方保管的模具第一次用来进行商业生产前，必须先把生产的4加仑塑料桶免费样品送给甲方进行确认，取得甲方书面形式的样品承认书后，乙方应出具书面的收货单（模具）给甲方后，才能用甲方专属模具按甲方的订单进行首次生产。

8. 模具的开发时间表（见附件二）及费用支付timetable of the

mould reaching and the payable of charge

由乙方提供瓶模及盖模的〈〈开发时间表》给甲方，并严格按时间表跟进丙方项目进展，因丙方原因有所变更时间表的，乙方应就变更情况及时通知甲方并获得甲方同意后方可改期，否则由于丙方擅自变更时间表，乙方未履行通知及监督义务的，甲方有权要求乙方按每