《计算机专业英语》第二章 英文原文
Chapter two
In 1972, in light of the changes happened in the field, Association for Educational Communications and Technology (AECT), as the successor of Department of Audiovisual Instruction (DAVI), released a new definition, with defined the field as:
A field involved in the facilitation of human learning through the systematic identification, development, organization and utilization of a full range of learning resources and through the management of these processes.
After five years, in 1977, AECT released another definition. As an elaboration of the 1972 definition, the 1977 definition further expressed instructional technology as:
A complex, integrated process involving people, procedures, ideas, devices and organization for analyzing problems and devising, implementing, evaluation and managing solutions to those problems involved in all aspects of human learning.
Besides the official definitions above mentioned, during the period, there were many professionals who proposed the definitions of this field personally and some of them were influential.
In 1970, Kenneth Silber who later chaired the AECT Committee on Definitions and Terminology, argued that:
Instructional Technology is the Development (Research, Design, Production, Evaluations, Support-Supply, Utilization) of Instructional Systems Components (Massages, Men, Materials, Devices, Techniques, Settings) and the Management of that development (Organization, Personnel ) in a systematic manner with the goal of solving educational problems.
The idea of “problem” is first introduced in Silber’s definition and is at the core of the definition.
In 1971, MacKenzie and Eraut provided a new definition for the field when it was referred as educational technology:
Educational technology is the systematic study of the means whereby educational ends ate achieved.
Section B The AECT’s Definitions in 1994
In 1994, the Committee on Definitions and Terminology of AECT released the most resent definition of the field in the book, Instructional Technology: The Domains and Definitions of the Field:
Instructional Technology is the theory and practice of design, development, utilization, management, and evaluation of processes and resources for learning.
The 1994 definition is build upon five separate areas of concern to instructional technologists:
Design, Development, Utilization, Management and Evaluation, which are five areas of study and practice within the field.
In the book, Instructional Technology: the Domains and Definitions of the Field, the authors present the domains and sub-domains of the field and explain the relationship between the domains.
The 1994 definition moves I some new directions while holding some of old ones. Unlike the previous definition, the 1994 definition does not describe the field as process –oriented.
In 2001，Robert A . Reiser proposed a new definition which differs from most the previous definitions in that it refers to the field as “instructional design and technology” rather than “instructional technology ” :
The field of instructional design and technology encompass the analysis of learning and performance problems, and the design, development, implementation, evaluation and management of
instructional and non-instructional processes and resources intended to improve learning and performance in a variety of settings, particularly educational institutions and the workplace.
In many ways it sight similar to the AECT 1994 definition, such as the five domains. But Reiser argued that this definition had many features and in some aspects, this definition went beyond the 1994 definition.
Erg
英语原文及其翻译
Exploring Filipino School Counselors’ Beliefs about Learning Allan B. I. Bernardo [Abstract] School reform efforts that focus on student learning require school counselors to take on important new roles as advocates of student learning and achievement.But how do school counselors understand the process of learning? In this study, we explore the learning beliefs of 115 Filipino school counselors who indicated their degree of agreementwith 42 statements about the process of learning and the factors thatinfluence this process.A principal components analysis of the responses to the 42 statements suggested three factors:(F1)social-cognitive constructivist beliefs, (F2) teacher-curriculum-centered behaviorist beliefs,and (F3) individual difference factors.The preliminary results are briefly discussed in terms of issues related to how Filipino school counselors’ conceptions of learning may guide their strategies for promoting student learning and achievement. [Key words]beliefs about learning, conceptions of learning, school counselors, student learning, Philippines School reform efforts in different parts of the world have focusedon students’learning. In particular,most school improvement programsnow aim to ensure that students acquire the high-level knowledge and skills that help them to thrive in today’s highly competitive globaleconomy (e.g., Lee & Williams, 2006). I n this regard, school reform programs draw from various contemporary theories and research on learning (e.g.,Bransford,Brown, & Cocking, 1999; Lambert & McCombs, 1998).The basic idea is that all school improvement efforts should be directed at ensuring students achieve high levels of learning or attainment of well-defined curricular objectives and standards.For example, textbooks (Chien & Young, 2007), computers and educational technology (Gravoso, 2002; Haertnel & Means, 2003;Technology in Schools Task Force, 2003), and educational assessment systems (Black & Wiliam2004; Cheung & Ng, 2007; Clark, 2001; Stiggins, 2005) are being reconsidered as regards how they can effectively provide scaffolds and resources for advancing student learning. Likewise,the allocation and management of a school’s financial resources are assessed in terms ofwhether these are effectively mobilized and utilized towards improving student learning (Bolam, 2006; Chung & Hung, 2006; Retna, 2007). In this regard, some advocates have also called for an examination of the role of school counselors in these reform efforts (Herr, 2002). Inthe United States, House and Hayes (2002) challenged school counselors to take proactive leadership roles in advocating for the success of all
蓝梅主编 给排水科学与工程专业英语部分课文翻译中文版
第四单元给水系统 一般来说，供水系统可划分为四个主要组成部分:（1）水源和取水工程（2）水处理和存储（3）输水干管和配水管网。常见的未处理的水或者说是原水的来源是像河流、湖泊、泉水、人造水库之类的地表水源以及像岩洞和水井之类的地下水源。修建取水构筑物和泵站是为了从这些水源中取水。原水通过输水干管输送到自来水厂进行处理并且处理后的出水储存到清水池。处理的程度取决于原水的水质和出水水质要求。有时候，地下水的水质是如此的好以至于在供给给用户之前只需消毒即可。由于自来水厂一般是根据平均日需求流量设计的，所以，清水池为水需求日变化量提供了一个缓冲区。 水通过输水干管长距离输送。如果输水干管中的水流是通过泵所产生的压力水头维持的，那么我们称这个干管为增压管。另外，如果输水干管中的水流是靠由于高差产生的可获得的重力势能维持的，那么我们称这个干管为重力管。在输水干管中没有中间取水。与输水干管类似，在配水管网中水流的维持要么靠泵增压，要么靠重力势能。一般来说，在平坦地区，大的配水管网中的水压是靠泵提供的，然而，在不平坦的地区，配水管网中的压力水头是靠重力势能维持的。 一个配水管网通过引入管连接配水给用户。这样的配水管网可能有不同的形状，并且这些形状取决于这个地区的布局。一般地，配水管网有环状或枝状的管道结构，但是，根据当地城市道路和街区总体布局计划，有时候环状和枝状结构合用。城市配水管网大多上是环状形式，然而，乡村地区的管网是枝状形式。由于供水服务可靠性要求高，环状管网优于枝状管网。 配水管网的成本取决于对管网的几何形状合适的选择。城市计划采用的街道布局的选择对提供一个最小成本的供水系统来说是重要的。环状管网最常见的两个供水结构是方格状、环状和辐射状；然而，我们不可能找到一个最佳的几何形状而使得成本最低。 一般地，城镇供水系统是单入口环状管系统。如上所说，环状系统有一些通过系统相互连接的管道使得通过这些连接接的管道，可以供水到同一个需水点。与枝状系统不同，在环状系统中，由于需水量在空间和时间上的变化，管道中的水流方向并非不变。 环状管网可为系统提供余量，提高系统应对局部变化的能力，并且保证管道故障时为用户供水。从水质方面来说，环状形状可减少水龄，因此被推广。管道的尺寸和配水系统的设计对减少水龄来说是重要的因素。由于多方向水流模式和系统中流动模式随时间的变化，水不会停留在一个地方，这样减少了水龄。环状配水系统的优缺点如表4.1所述。 优点:1.Minimize loss of services.as main breaks can be isolated due to multidirectional flow to demand points.2.Reliability for fire protection is higher due to redundancy in the system.3.Likely to meet increase in water demand -higher capacity and lower velocities.4.Better residual chlorine due to in line mixing and fewer dead ends. 5.Reduced water age. 在文献中曾记载过，只考虑最低成本设计的环状管网系统会转化成树状似的结构，这一做法导致在最终的设计中失去最初的几何形状。环状保证了系统的可靠性。因此，一个只考虑最低成本为依据的设计打败了在环状管网中所提供的基本功能。有文献记载设计环状管网系统的方法。尽管这个方法也是仅以考虑最低成本为基础，它通过对管网中所有管道最优化规划从而保持了管网的环状结构。
数字信号处理翻译
吴楠电子与通信工程2014309013 Signal processing Signal processing is an area of electrical engineering and applied mathematics that deals with operations on or analysis of signals, in either discrete or continuous time, to perform useful operations on those signals. Signals of interest can include sound, images, time-varying measurement values and sensor data, for example biological data such as electrocardiograms, control system signals, telecommunication transmission signals such as radio signals, and many others. Signals are analog or digital electrical representations of time-varying or spatial-varying physical quantities. In the context of signal processing, arbitrary binary data streams and on-off signalling are not considered as signals, but only analog and digital signals that are representations of analog physical quantities. History According to Alan V. Oppenheim and Ronald W. Schafer, the principles of signal processing can be found in the classical numerical analysis techniques of the 17th century. They further state that the "digitalization" or digital refinement of these techniques can be found in the digital control systems of the 1940s and 1950s.[2]
英文文献
英文文献 1 Introduction Following the immensely successful first-generation Cyclone device family, Altera Cyclone II FPGAs extend the low-cost FPGA density range to 68,416 logic elements (LEs) and provide up to 622 usable I/O pins and up to 1.1 Mbits of embedded memory. Cyclone II FPGAs are manufactured on 300-mm wafers using TSMC's 90-nm low-k dielectric process to ensure rapid availability and low cost. By minimizing silicon area, Cyclone II devices can support complex digital systems on a single chip at a cost that rivals that of ASICs. Unlike other FPGA vendors who compromise power consumption and performance for low-cost, Altera’s latest generation of low-cost FPGAs—Cyclone II FPGAs, offer 60% higher performance and half the power consumption of competing 90-nm FPGAs. The low cost and optimized feature set of Cyclone II FPGAs make them ideal solutions for a wide array of automotive, consumer, communications, video processing, test and measurement, and other end-market solutions. Reference designs, system diagrams, and IP, found at https://www.360docs.net/doc/ad17092682.html,, are available to help you rapidly develop complete end-market solutions using Cyclone II FPGAs. Low-Cost Embedded Processing Solutions Cyclone II devices support the Nios II embedded processor which allows you to implement custom-fit embedded processing solutions. Cyclone II devices can also expand the peripheralset, memory, I/O, or performance of embedded processors. Single or multiple Nios II embedded processors can be designed into a Cyclone IIdevice to provide additional co-processing power or even replace existing embedded processors in your system. Using Cyclone II and Nios II together allow for low-cost, high-performance embedded processing solutions, which allow you to extend your product's life cycle and improve time to market over standard product solutions Low-Cost DSP Solutions Use Cyclone II FPGAs alone or as DSP co-processors to improve price-to-performance ratios for digital signal processing (DSP) applications. You can implement high-performance yet low-cost DSP systems with the following Cyclone II features and design support: ■ Up to 150 18 × 18 multipliers ■ Up to 1.1 Mb it of on-chip embedded memory ■ High-speed interfaces to external memory
文献翻译英文原文
https://www.360docs.net/doc/ad17092682.html,/finance/company/consumer.html Consumer finance company The consumer finance division of the SG group of France has become highly active within India. They plan to offer finance for vehicles and two-wheelers to consumers, aiming to provide close to Rs. 400 billion in India in the next few years of its operations. The SG group is also dealing in stock broking, asset management, investment banking, private banking, information technology and business processing. SG group has ventured into the rapidly growing consumer credit market in India, and have plans to construct a headquarters at Kolkata. The AIG Group has been approved by the RBI to set up a non-banking finance company (NBFC). AIG seeks to introduce its consumer finance and asset management businesses in India. AIG Capital India plans to emphasize credit cards, mortgage financing, consumer durable financing and personal loans. Leading Indian and international concerns like the HSBC, Deutsche Bank, Goldman Sachs, Barclays and HDFC Bank are also waiting to be approved by the Reserve Bank of India to initiate similar operations. AIG is presently involved in insurance and financial services in more than one hundred countries. The affiliates of the AIG Group also provide retirement and asset management services all over the world. Many international companies have been looking at NBFC business because of the growing consumer finance market. Unlike foreign banks, there are no strictures on branch openings for the NBFCs. GE Consumer Finance is a section of General Electric. It is responsible for looking after the retail finance operations. GE Consumer Finance also governs the GE Capital Asia. Outside the United States, GE Consumer Finance performs its operations under the GE Money brand. GE Consumer Finance currently offers financial services in more than fifty countries. The company deals in credit cards, personal finance, mortgages and automobile solutions. It has a client base of more than 118 million customers throughout the world
建筑工程及给排水专业中英文对照翻译
Laminar and Turbulent Flow Observation shows that two entirely different types of fluid flow exist. This was demon- strated by Osborne Reynolds in 1883 through an experiment in which water was discharged from a tank through a glass tube. The rate of flow could be controlled by a valve at the outlet, and a fine filament of dye injected at the entrance to the tube. At low velocities, it was found that the dye filament remained intact throughout the length of the tube, showing that the particles of water moved in parallel lines. This type of flow is known as laminar, viscous or streamline, the particles of fluid moving in an orderly manner and retaining the same relative positions in successive cross- sections. As the velocity in the tube was increased by opening the outlet valve, a point was eventually reached at which the dye filament at first began to oscillate and then broke up so that the colour was diffused over the whole cross-section, showing that the particles of fluid no longer moved in an orderly manner but occupied different relative position in successive cross-sections. This type of flow is known as turbulent and is characterized by continuous small fluctuations in the magnitude and direction of the velocity of the fluid particles, which are accompanied by corresponding small fluctuations of pressure. When the motion of a fluid particle in a stream is disturbed, its inertia
数字信号处理英语词汇
A Absolutely integrable 绝对可积 Absolutely integrable impulse response 绝对可积冲激响应Absolutely summable 绝对可和 Absolutely summable impulse response 绝对可和冲激响应Accumulator 累加器 Acoustic 声学 Adder 加法器 Additivity property 可加性 Aliasing 混叠现象 All-pass systems 全通系统 AM (Amplitude modulation ) 幅度调制 Amplifier 放大器 Amplitude modulation (AM) 幅度调制 Amplitude-scaling factor 幅度放大因子 Analog-to-digital (A-to-D) converter 模数转换器 Analysis equation 分析公式（方程）Angel (phase) of complex number 复数的角度（相位）Angle criterion 角判据 Angle modulation 角度调制Anticausality 反因果 Aperiodic 非周期 Aperiodic convolution 非周期卷积Aperiodic signal 非周期信号Asynchronous 异步的 Audio systems 音频（声音）系统Autocorrelation functions 自相关函数Automobile suspension system 汽车减震系统Averaging system 平滑系统 B Band-limited 带（宽）限的 Band-limited input signals 带限输入信号 Band-limited interpolation 带限内插 Bandpass filters 带通滤波器Bandpass signal 带通信号 Bandpass-sampling techniques 带通采样技术Bandwidth 带宽 Bartlett (triangular) window 巴特利特（三角形）窗Bilateral Laplace transform 双边拉普拉斯变换Bilinear 双线性的
fpga英文文献翻译
Field-programmable gate array (现场可编程门阵列) 1、History ——历史 FPGA业界的可编程只读存储器（PROM）和可编程逻辑器件（PLD）萌芽。可编程只读存储器（PROM）和可编程逻辑器件（PLD）都可以分批在工厂或在现场（现场可编程）编程，然而，可编程逻辑被硬线连接在逻辑门之间。 在80年代末期，为海军水面作战部提供经费的的史蒂夫·卡斯尔曼提出要开发将实现60万可再编程门计算机实验。卡斯尔曼是成功的，并且与系统有关的专利是在1992年发行的。 1985年，大卫·W·佩奇和卢文R.彼得森获得专利，一些行业的基本概念和可编程逻辑阵列，门，逻辑块技术公司开始成立。 同年，Xilinx共同创始人，Ross Freeman和Bernard Vonderschmitt发明了第一个商业上可行的现场可编程门阵列——XC2064。该XC2064可实现可编程门与其它门之间可编程互连，是一个新的技术和市场的开端。XC2064有一个64位可配置逻辑块（CLB），有两个三输入查找表（LUT）。20多年后，Ross Freeman进入全国发明家名人堂，名人堂对他的发明赞誉不绝。 Xilinx继续受到挑战，并从1985年到90年代中期迅速增长，当竞争对手如雨后春笋般成立，削弱了显著的市场份额。到1993年，Actel大约占市场的18％。
上世纪90年代是FPGA的爆炸性时期，无论是在复杂性和生产量。在90年代初期，FPGA的电信和网络进行了初步应用。到这个十年结束时，FPGA行业领袖们以他们的方式进入消费电子，汽车和工业应用。 1997年，一个在苏塞克斯大学工作的研究员阿德里安·汤普森，合并遗传算法技术和FPGA来创建一个声音识别装置，使得FPGA的名气可见一斑。汤姆逊的算法配置10×10的细胞在Xilinx的FPGA芯片阵列，以两个音区分，利用数字芯片的模拟功能。而今，该遗传算法应用到FPGA中设备的配置上被称为演化硬件。 2、Modern developments ——现代的发展 最近的趋势是通过组合逻辑块和嵌入式微处理器和相关外设传统的FPGA 互连，形成一个完整的“可编程片上系统”，采取粗粒度的架构方法实现了这一步。这项工作反映了由宝来先进系统集团的Ron Perlof 和Hana Potash在单一芯片SB24上结合可重构CPU架构的体系结构。这项工作是在1982年完成的，这种混合动力技术可以在Xilinx公司的Virtex-II Pro和Virtex-4设备中看到，包括嵌入式FPGA的逻辑结构中的一个或多个PowerPC处理器。Atmel 的FPSLIC是另一个这样的设备，它使用的是组合了Atmel可编程逻辑架构的AVR处理器。Actel的SmartFusion器件集成了配置有Cortex-M3硬处理器内核（最大闪存和512KB为64KB RAM）的ARM架构和模拟外设，如多通道ADC和DAC的基于闪存的FPGA架构。 使用硬宏处理器的另一种方法是利用在FPGA逻辑中实现的软核处理器。
英文翻译(原文)
GRA VITY RETAINING?WALL 1. INTRODUCTION Retaining walls are structures used to provide stability for earth or other material where conditions disallow the mass to assume its natural slope, and are commonly used to hold back or support soilbanks,coal or ore piles, and water. Retaining walls are classified, based on the method of achieving stability, into six principal types (Fig.1). The gravity-wall depends upon its weight, as the name implies, for stability. The cantilever wall is a reinforced-concrete wall that utilizes cantilever action to retain the mass behind the wall from assuming a natural slope. Stability of this wall is partially achieved from the weight of soil on the heel portion of the base slab. A counterfort retaining wall is similar to a cantilever retaining wall, except that it is used where the cantilever is long or for very high pressures behind wall and has counterforts, which tie the wall and base together, built at intervals along the wall to reduce the bending moments and sheers. As indicated in Fig.1c, the counterfort is behind the wall and subjected to tensile forces. A buttressed retaining wall is similar to a counterfort wall, except that the bracing is in front of the wall and is in compression instead of tension. Two other types of walls not considered further are crib walls, which are built-up members of pieces of precast concrete, metal, or timber and are supported by anchor pieces embedded in the soil for stability, and semigravity walls, which are walls intermediate between a true gravity and a cantilever wall. (a)(b)(e)
水文与水资源专业英语文章翻译
3单元 地下水位的高低可在一年内大幅波动，下降和上升后，在干燥的季节，降水期。因此，为了保证连续供水，井应穿透许多米水位以下。当水从井里抽水，它在水面产生抑郁，大致锥形的形状，称为漏斗。如果抽重，水表不仅可以降低周围的好但还可延伸到大面积。这在美国西部的部分是这样的。在这种情况下，可以说，地下水被“开采”。即使抽人立即停止，它可能需要数百年的地下水得到补充。下面的例子说明了这一点： 例如，在干燥的美国西南部，含水层补给是每年只有1英寸深的水的十分之二点位置。在这些地区，这是不寻常的泵两英尺或更多的水用于灌溉和其他用途的每年。在这个简单的例子，如果整个含水层抽水的速度，每年的开采量将相当于120年和十年的补给，泵将1200年积累的水。在泵送期间新补给可以忽略不计。机械问题和经济因素阻止完全脱水的含水层，但原则上是有效的例子。 短期承压是适用于任何情况，地下水位上升，在一个以上的水平，这是最初遇到的。这样的情况发生，两个条件必须满足：（1）水，必须限制在一个含水层，是倾斜的，一端暴露在表面，在那里可以得到水；和（2）防渗层，上面和下面的含水层，必须防止水逃避，这样一层被窃听，被上面的水的重量产生的压力会使水上升。如果没有摩擦，井里的水会上升到顶部的水位。含水层。 自流系统作为管道，将水从很远的偏远地区的充电放电点。这样水倒在威斯康星州中部年前现在是从地面和社区许多英里远，伊利诺斯。在南达科他州这样的系统已经从西部的黑山带水，向东跨越国家。在不同的尺度上，城市供水系统可能是人为的自流系统的例子。水塔，为抽水，可能是补给区，管道的承压含水层，在家中的自流井的水龙头。 4单元 矿产勘查在世界表明温度在深油、矿产品通常会增加在地表以下深度增加。在这样的情况下增加温度约0.6度，平均每30米。因此，当地下水在深循环，它变得激烈，如果它上升到表面，水是温泉。一些温泉水在美国，特别是在东部，加热这种方式。在美国，绝大多数的温泉发现于西方。这种分布的原因是，大部分温泉的热源是冷却的火成岩，它是在西方，火成活动已经最近。 间歇泉是间歇性的温泉或喷泉，水柱喷射的伟大力量在不同的时间间隔，通常上升30-60米。水流停止后，一列蒸汽冲出，通常以雷鸣般的轰鸣声。这或许是世界上最著名的间歇泉是黄石公园的老忠实喷发，大约每小时一次。间歇泉也在世界的其他地区，包括冰岛和新西兰，在那里长期间歇泉，意为“喷泉”或“井喷”这个词。 间歇泉时，地下水是地下室加热。室底部，水在巨大的压力下，由于上覆水的重量。因此，一个100度以上的温度就会沸腾所需的前。例如，在一个300米的室内水下必须达到一个温度近230度才开。加热使水膨胀，其结果是某些流出的顶部。这减少了压力，和水变成蒸汽，使间歇泉喷发。 从温泉和间歇泉地下水通常包含在解决方案比其他来源的地下水多材料因为热水比冷水更有效的溶解。当水中含有大量溶解的二氧化硅，硅华沉积在春天。石灰石，方解石的一种，是在石灰岩地区温泉特色存款。一些温泉含硫磺。除了使水的味道不好，硫发出难闻的气味。毫无疑问，臭蛋的春天，内华达州，这种情况。 11单元 一种污染物，是任何物质，生物或化学。在一个可识别的过量的有害的其他理想的生物。在这个框架内，过量的重金属如发汞；某些放射性同位素；氮，磷，钠；和其他有用的，甚至是必要的元素，以及某些致病性细菌和病毒污染物。在某些情况下，材料可作为一种污染物，世界人口中的一段特别的虽然它对其他部分不被认为是有害的。例如，在适当的复合氮超标有害于婴儿，但少了很多成年人如果在所有。在这样的方式，过多的钠盐通常不是有害的，但它可以制约医疗原因盐的摄入饮食的某些人。 不同的物理，地质，生物环境与地下水污染与地表水污染相比是显著的。在后者中，流量和氧气和阳光可用液压，随着速度的过程中污染物的稀释和扩散发生，明显不同于地下水，在污染物降解菌的机会通常局限于土壤或几英尺以下。此外，通过何种渠道地下水运动是非常小的和可变的。由此，显而易见的是，移动速度大大降低，除非，也许，在大的解决渠道内石灰石，以及分散和稀释的机会是非常有限的。此外，地下水通常缺乏氧气，这是造成好氧微生物的种类有帮助但这可能提供了一个“幸福之家”厌氧品种。 大多数土壤和岩石物理过滤出固体的能力，包括污染的固体，是公认的。然而，这种能力会随不同的大小，形状，和滤料颗粒的安排，在选定的沙子和其他材料在水过滤厂使用证明。也知道，但也许不那么普遍，是粘土和其他矿物捕获和交换的一些元素和化合物的能力时，他们游离在溶液中的正或负电荷的元素或化合物。这样的交流，随着吸附和沉淀过程中，污染物的捕获是重要的。这些过程有能力定义的单位是可逆的。他们也可以很容易地在设计设施正确的污染问题所依托的地质环境，土壤和岩石忽视治疗；这种疏忽可能造成地下水污染。这是特别重要的在污水土地应用。 很多猜测，争论，研究发生的地下水污染。地下水污染的主要关注的是化学元素，化合物的引入，和微生物，不含水层，可用于饮用水或是自然发生的，不仅因为该含水层的降解也因为在检测的难度，长期居住，和难度和费用含水层恢复。强有力的论点是，任何废物或可能的污染物应允许进入地下水系统的任何部分。这是一个不可能实现的梦想。相反，答案在于更多的了解自然过程处理废弃物的保证时，土壤和岩石是不能够处理，存储，或回收废物，我们可以发展过程使污染物处理，储存，或可回收。 Extracting and distinguishing environmental change information with high resolution form groundwater and sediments of groundwater system has been the major trend of groundwater sciences towards environmental sciences, This is very useful for forecasting environmental change.4从地下水及其沉积物中提取高分辨率的环境变化信息，实现对环境变化的预警功能是地下水科学向环境科学延伸的重要方向。5而随着全球淡水资源紧缺的形势不断恶化，全球环境变化，特别是全球气候变化对地下水资源的影响成为水文地质研究的新课题。5 With fresh water shortage increasingly serious, the research on effect of globle environmental change, especially globle climate change in groundwater resource has become a new area for hydrogeological research. 4depleted in K and SO4 井的出水量与含水层的渗透系数成正比。 Well water yield is proportional to the transmissivity of a aquifer. 1、分布在这个深层碳酸岩含水层中的地下热水的温度是60℃-90℃。 2、Temperature of the thermal groundwater in the deep-seated carbonate aquifer occurring in this area ranges from 60℃ 3、所有观测井水位的季节性波动可以用研究区降水量的季节性变化来解 4、Seasonal fluctuations in water table in observation wells are interpreted by seasonal changes of/in precipitation in study areas.