外文翻译----数字图像处理方法的研究(中英文)

The research of digital image processing technique

1Introduction

Interest in digital image processing methods stems from two principal application areas:improvement of pictorial information for human interpretation;and processing of image data for storage,transmission,and representation for autonomous machine perception.This chapter has several objectives:(1)to define the scope of the field that we call image processing;(2)to give a historical perspective of the origins of this field;

(3)to give an idea of the state of the art in image processing by examining some of the principal area in which it is applied;(4)to discuss briefly the principal approaches used in digital image processing;(5)to give an overview of the components contained in a typical,general-purpose image processing system;and(6)to provide direction to the books and other literature where image processing work normally is reporter.

1.1What Is Digital Image Processing?

An image may be defined as a two-dimensional function,f(x,y),where x and y are spatial(plane)coordinates,and the amplitude of f at any pair of coordinates(x,y)is called the intensity or gray level of the image at that point.When x,y,and digital image.The field of digital image processing refers to processing digital images by means of a digital computer.Note that a digital image is composed of a finite number of elements,each of which has a particular location and value.These elements are referred to as picture elements,image elements,pels,and pixels.Pixel is the term most widely used to denote the elements of a digital image.We consider these definitions in more formal terms in Chapter2.

Vision is the most advanced of our senses,so it is not surprising that images play the single most important role in human perception.However,unlike human who are limited to the visual band of the electromagnetic(EM)spectrum,imaging machines cover almost the entire EM spectrum,ranging from gamma to radio waves.They can operate on images generated by sources that human are not accustomed to associating with image.These include ultrasound,electron microscopy,and computer-generated images.Thus,digital image processing encompasses a wide and varied field of application.

There is no general agreement among authors regarding where image processing stops and other related areas,such as image analysis and computer vision,start. Sometimes a distinction is made by defining image processing as a discipline in which both the input and output of a process are images.We believe this to be a limiting and somewhat artificial boundary.For example,under this definition,even the trivial task of computing the average intensity of an image(which yields a single number)would not be considered an image processing operation.On the other hand, there are fields such as computer vision whose ultimate goal is to use computer to

emulate human vision,including learning and being able to make inferences and take actions based on visual inputs.This area itself is a branch of artificial intelligence(AI) whose objective is to emulate human intelligence.This field of AI is in its earliest stages of infancy in terms of development,with progress having been much slower than originally anticipated.The area of image analysis(also called image understanding)is in between image processing and computer vision.

There are no clear-cut boundaries in the continuum from image processing at one end to computer vision at the other.However,one useful paradigm is to consider three types of computerized processes is this continuum:low-,mid-,and high-ever processes.Low-level processes involve primitive operation such as image preprocessing to reduce noise,contrast enhancement,and image sharpening.A low-level process is characterized by the fact that both its input and output are images. Mid-level processing on images involves tasks such as segmentation(partitioning an image into regions or objects),description of those objects to reduce them to a form suitable for computer processing,and classification(recognition)of individual object. Amid-level process is characterized by the fact that its inputs generally are images, but its output is attributes extracted from those images(e.g.,edges contours,and the identity of individual object).Finally,higher-level processing involves“making sense”of an ensemble of recognized objects,as in image analysis,and,at the far end of the continuum,performing the cognitive function normally associated with vision. Based on the preceding comments,we see that a logical place of overlap between image processing and image analysis is the area of recognition of individual regions or objects in an image.Thus,what we call in this book digital image processing encompasses processes whose inputs and outputs are images and,in addition, encompasses processes that extract attributes from images,up to and including the recognition of individual objects.As a simple illustration to clarify these concepts, consider the area of automated analysis of text.The processes of acquiring an image of the area containing the text.Preprocessing that images,extracting(segmenting)the individual characters,describing the characters in a form suitable for computer processing,and recognizing those individual characters are in the scope of what we call digital image processing in this book.Making sense of the content of the page may be viewed as being in the domain of image analysis and even computer vision, depending on the level of complexity implied by the statement“making cense.”As will become evident shortly,digital image processing,as we have defined it,is used successfully in a broad rang of areas of exceptional social and economic value.The concepts developed in the following chapters are the foundation for the methods used in those application areas.

1.2The Origins of Digital Image Processing

One of the first applications of digital images was in the newspaper industry,when pictures were first sent by submarine cable between London and NewYork. Introduction of the Bartlane cable picture transmission system in the early1920s reduced the time required to transport a picture across the Atlantic from more than a

week to less than three hours.Specialized printing equipment coded pictures for cable transmission and then reconstructed them at the receiving end.Figure 1.1was transmitted in this way and reproduced on a telegraph printer fitted with typefaces simulating a halftone pattern.

Some of the initial problems in improving the visual quality of these early digital pictures were related to the selection of printing procedures and the distribution of intensity levels.The printing method used to obtain Fig.1.1was abandoned toward the end of1921in favor of a technique based on photographic reproduction made from tapes perforated at the telegraph receiving terminal.Figure1.2shows an images obtained using this method.The improvements over Fig.1.1are evident,both in tonal quality and in resolution.

FIGURE1.1A digital picture produced in FIGURE1.2A digital picture 1921from a coded tape by a telegraph printer made in1922from a tape punched With special type faces(McFarlane)after the signals had crossed the

Atlantic twice.Some errors are

Visible.(McFarlane)

The early Bartlane systems were capable of coding images in five distinct level of gray.This capability was increased to15levels in1929.Figure1.3is typical of the images that could be obtained using the15-tone equipment.During this period, introduction of a system for developing a film plate via light beams that were modulated by the coded picture tape improved the reproduction process considerably. Although the examples just cited involve digital images,they are not considered digital image processing results in the context of our definition because computer were not involved in their creation.Thus,the history of digital processing is intimately tied to the development of the digital computer.In fact digital images require so much storage and computational power that progress in the field of digital image processing has been dependent on the development of digital computers of supporting technologies that include data storage,display,and transmission.

The idea of a computer goes back to the invention of the abacus in Asia Minor, more than5000years ago.More recently,there were developments in the past two centuries that are the foundation of what we call computer today.However,the basis

for what we call a modern digital computer dates back to only the1940s with the introduction by John von Neumann of two key concepts:(1)a memory to hold a stored program and data,and(2)conditional branching.There two ideas are the foundation of a central processing unit(CPU),which is at the heart of computer today. Starting with von Neumann,there were a series of advances that led to computers powerful enough to be used for digital image processing.Briefly,these advances may be summarized as follow:

(1)the invention of the transistor by Bell Laboratories in1948;

(2)the development in the1950s and1960s of the high-level programming

languages COBOL(Common Business-Oriented Language)and FORTRAN (Formula Translator);

(3)the invention of the integrated circuit(IC)at Texas Instruments in1958;

(4)the development of operating system in the early1960s;

(5)the development of the microprocessor(a single chip consisting of the central

processing unit,memory,and input and output controls)by Inter in the early 1970s;

(6)introduction by IBM of the personal computer in1981;

(7)progressive miniaturization of components,starting with large scale integration

(LI)in the late1970s,then very large scale integration(VLSI)in the1980s,to the present use of ultra large scale integration(ULSI).

Figure1.3In1929from London to Cenerale Pershing

that New York delivers with15level tone equipments

through cable with Foch do not the photograph by decoration

Concurrent with these advances were development in the areas of mass storage and display systems,both of which are fundamental requirements for digital image processing.

The first computers powerful enough to carry out meaningful image processing

tasks appeared in the early1960s.The birth of what we call digital image processing today can be traced to the availability of those machines and the onset of the apace program during that period.It took the combination of those two developments to bring into focus the potential of digital image processing concepts.Work on using computer techniques for improving images from a space probe began at the Jet Propulsion Laboratory(Pasadena,California)in1964when pictures of the moon transmitted by Ranger7were processed by a computer to correct various types of image distortion inherent in the on-board television camera.Figure1.4shows the first image of the moon taken by Ranger7on July31,1964at9:09A.M.Eastern Daylight Time(EDT),about17minutes before impacting the lunar surface(the markers,called reseau mark,are used for geometric corrections,as discussed in Chapter5).This also is the first image of the moon taken by a U.S.spacecraft.The imaging lessons learned with ranger7served as the basis for improved methods used to enhance and restore images from the Surveyor missions to the moon,the Mariner series of flyby mission to Mars,the Apollo manned flights to the moon,and others.

In parallel with space application,digital image processing techniques began in the late1960s and early1970s to be used in medical imaging,remote Earth resources observations,and astronomy.The invention in the early1970s of computerized axial tomography(CAT),also called computerized tomography(CT)for short,is one of the most important events in the application of image processing in medical diagnosis. Computerized axial tomography is a process in which a ring of detectors encircles an object(or patient)and an X-ray source,concentric with the detector ring,rotates about the object.The X-rays pass through the object and are collected at the opposite end by the corresponding detectors in the ring.As the source rotates,this procedure is repeated.Tomography consists of algorithms that use the sensed data to construct an image that represents a“slice”through the object.Motion of the object in a direction perpendicular to the ring of detectors produces a set of such slices,which constitute a three-dimensional(3-D)rendition of the inside of the object.Tomography was invented independently by Sir Godfrey N.Hounsfield and Professor Allan M. Cormack,who shared the X-rays were discovered in1895by Wilhelm Conrad Roentgen,for which he received the1901Nobel Prize for Physics.These two inventions,nearly100years apart,led to some of the most active application areas of image processing today.

Figure1.4The first picture of the moon by a U.S. Spacecraft.Ranger7took this image on July31, 1964at9:09A.M.EDT,about17minutes before

Impacting the lunar surface.(Courtesy of NASA.)

中文翻译

数字图像处理方法的研究

1绪论

数字图像处理方法的研究源于两个主要应用领域:其一是为了便于人们分析而对图像信息进行改进；其二是为了使机器自动理解而对图像数据进行存储、传输及显示。

1.1数字图像处理的概念

一幅图像可定义为一个二维函数f(x,y)，这里x和y是空间坐标，而在任何一对空间坐标f(x,y)上的幅值f称为该点图像的强度或灰度。当x，y和幅值f为有限的、离散的数值时，称该点是由有限的元素组成的，没一个元素都有一个特定的位置和幅值，这些元素称为图像元素、画面元素或象素。象素是广泛用于表示数字图像元素的词汇。在第二章，将用更正式的术语研究这些定义。

视觉是人类最高级的感知器官，所以，毫无疑问图像在人类感知中扮演着最重要的角色。然而，人类感知只限于电磁波谱的视觉波段，成像机器则可覆盖几乎全部电磁波谱，从伽马射线到无线电波。它们可以对非人类习惯的那些图像源进行加工，这些图像源包括超声波、电子显微镜及计算机产生的图像。因此，数字图像处理涉及各种各样的应用领域。

图像处理涉及的范畴或其他相关领域(例如，图像分析和计算机视觉)的界定在初创人之间并没有一致的看法。有时用处理的输人和输出内容都是图像这一特点来界定图像处理的范围。我们认为这一定义仅是人为界定和限制。例如，在这个定义下，甚至最普通的计算一幅图像灰度平均值的工作都不能算做是图像处理。另一方面，有些领域(如计算机视觉)研究的最高目标是用计算机去模拟人类视觉，包括理解和推理并根据视觉输人采取行动等。这一领域本身是人工智能的分支，其目的是模仿人类智能。人工智能领域处在其发展过程中的初期阶段，它的发展比预期的要慢得多，图像分析(也称为图像理解)领域则处在图像处理和计算机视觉两个学科之间。

从图像处理到计算机视觉这个连续的统一体内并没有明确的界线。然而，在这个连续的统一体中可以考虑三种典型的计算处理(即低级、中级和高级处理)来区分其中的各个学科。低级处理涉及初级操作，如降低噪声的图像预处理，对比度增强和图像尖锐化。低级处理是以输人、输出都是图像为特点的处理。中级处理涉及分割〔把图像分为不同区域或目标物)以及缩减对目标物的描述，以使其更适合计算机处理及对不同日标的分类(识别)。中级图像处理是以输人为图像，但输出是从这些图像中提取的特征(如边缘、轮廓及不同物体的标识等)为特点的。最后，高级处理涉及在图像分析中被识别物体的总体理解，以及执行与视觉相关的识别函数(处在连续统一体边缘)等。

根据上述讨论，我们看到，图像处理和图像分析两个领域合乎逻辑的重叠区域是图像中特定区域或物体的识别这一领域。这样，在本书中，我们界定数字图

像处理包括输人和输出均是图像的处理，同时也包括从图像中提取特征及识别特定物体的处理。举一个简单的文本自动分析方面的例子来具体说明这一概念。在自动分析文本时首先获取一幅包含文本的图像，对该图像进行预处理，提取(分割)字符，然后以适合计算机处理的形式描述这些字符，最后识别这些字符，而所有这些操作都在本书界定的数字图像处理的范围内。理解一页的内容可能要根据理解的复杂度从图像分析或计算机视觉领域考虑问题。这样，本书定义的数字图像处理的概念将在有特殊社会和经济价值的领域内通用。在以下各章展开的概念是那些应用领域所用方法的基础。

1.2数字图像处理的起源

数字图像处理最早的应用之一是在报纸业，当时，图像第一次通过海底电缆从伦敦传往纽约。早在20世纪20年代曾引入Btutlane电缆图片传输系统，把横跨大西洋传送一幅图片所需的时间从一个多星期减少到3个小时。为了用电缆传输图片，首先要进行编码，然后在接收端用特殊的打印设备重构该图片。图1.1就是用这种方法传送并利用电报打印机通过字符模拟中间色调还原出来的图像。

这些早期数字图像视觉质量的改进工作，涉及到打印过程的选择和亮度等级的分布等问题。用于得到图1.1的打印方法到1921年底就被彻底淘汰了，转而支持一种基于光学还原的技术，该技术在电报接收端用穿孔纸带打出图片。图1.2就是用这种方法得到的图像，对比图1.1，它在色调质量和分辨率方面的改进都很明显。

图1.11421年由电报打印机采用特殊字图1.21922年在信号两次穿越大西洋后，符在编码纸带中产生的数字图像从穿孔纸带得到的数字图像，可以

(McFalsne)看出某些差错(McFalsne)

早期的Bartlane系统可以用5个灰度等级对图像编码，到1929年已增加到15个等级。图1.3所示的这种典型类型的图像就是用15级色调设备得到的。在这一时期，由于引入了一种用编码图像纸带去调制光束而使底片感光的系统，明显地改善了复原过程。

刚才引用的数字图像的例子并没有考虑数字图像处理的结果，这主要是因为没有涉及到计算机。因此，数字图像处理的历史与数字计算机的发展密切相关。事实上，数字图像要求非常大的存储和计算能力，因此数字图像处理领域的发展必须依靠数字计算机及数据存储、显示和传输等相关技术的发展。

计算机的概念可追溯到5000多年前中国算盘的发明。近两个世纪以来的一些发展也奠定了计算机的基础。然而，现代计算机的基础还要回溯到20世纪40年代由约翰·冯·诺依曼提出的两个重要概念:(l)保存程序和数据的存储器;(2)条件分支。这两个概念是中央处理单元(CPU)的基础。今天，它是计算机的心脏。从冯·诺依曼开始，引发了一系列重要技术进步，使得计算机以强大的功能用于数字图像处理领域。

简单说，这些进步可归纳为如下几点:

(1)1948年贝尔实验室发明了晶体三极管；

(2)20世纪50年代到20世纪60年代高级编程语言(如COBOL和FORTRAN)的开发；

(3)1958年得州仪器公司发明了集成电路(IC);

(4)20世纪60年代早期操作系统的发展;

(5)20世纪70年代Intel公司开发了微处理器(由中央处理单元、存储器和输入输出控制组成的单一芯片);

(6)1981年IBM公司推出了个人计算机;

(7)20世纪70年代出现的大规模集成电路(LI)所引发的元件微小化革命，20世纪80年代出现了YLSI(超大规模集成电路)，现在已出现了ULSI。

图1.3在1929年从伦敦到纽约用15级色调设备通过电缆

传送的Cenerale Pershing和Foch的未经修饰的照片伴随着这些技术进步，大规模的存储和显示系统也随之发展起来。这两者均是数字图像处理的基础。

第一台可以执行有意义的图像处理任务的大型计算机出现在20世纪60年代早期。数字图像处理技术的诞生可追溯至这一时期这些机器的使用和空间项目的开发，这两大发展把人们的注意力集中到数字图像处理的潜能上。利用计算机技术改善空间探测器发回的图像的工作，始于1964年美国加利福尼亚的喷气推进实验室。当时由“旅行者7号”卫星传送的月球图像由一台计算机进行了处理，以校正航天器上电视摄像机中各种类型的图像畸变。图1.4显示了由“旅行者7号”于1954年7月31日上午(东部白天时间)9点09分在光线影响月球表面前约17分钟时摄取的第一张月球图像[痕迹(称为网状痕迹)用于几何校正，在第5章将讨论该间题]，这也是美国航天器取得的第一幅月球图像。“旅行者7号”传

送的图像可作为改善的增强和复原图像(例如来自“探索者”登月一飞行、“水手号”系列空间探渊器及阿波罗载人登月飞行的图像)方法的基础。

进行空间应用的同时，数字图像处理技术在20世纪60年代末和20世纪70年代初开始用于医学图像、地球遥感监测和天文学等领域。早在20世纪70年代发明的计算机轴向断层术(CAT)[简称计算机断层(CT)]是图像处理在医学诊断领域最重要的应用之一。计算机轴向断层术是一种处理方法，在这种处理中，一个检测器环围绕着一个物体(或病人)，并且一个x射线源(与检测器环同心)绕着物体旋转。X射线穿过物体并由位于对面环中的相应检测器收集起来。当X射线源旋转时，重复这一过程。断层技术由一些算法组成，该算法用感知的数据去重建通过物体的“切片”图像。当物体沿垂直于检测器的方向运动时就产生一系列这样的“切片”，这些切片组成了物体内部的再现图像。断层技术是由Godfrey N. Hounsfield先生和Allan M.Cormack教授发明的，他们共同获得了1979年诺贝尔医学奖。X射线是在1895年由威廉·康拉德·伦琴发现的，由于这一发现，他获得了I901年诺贝尔物理学奖。这两项发明相差近100年。它们在今天引领着图像处理某些最活跃的应用领域。

图1.4美国航天器传送的第一张月球照片，“旅行者7号”

卫星1964年7月31日9点09分(东部白天时间)在

光线影响月球表面前17分钟时摄取的图像