ME60-QOS配置指导
1.首先定义一个qos profile:
Qos profile,Qos模板,主要是配置Queue/Drop/Scheduler之间的绑定关系,全局支持配置1024个qos profile
创建或进入qos模板视图
qos-profile
1、绑定scheduler-profile
scheduler-profile scheduler-profile-name
2、绑定queue-profile
queue-profile queue-profile-name
3、绑定drop-profile
drop-profile drop-profile-name
[Test2_ME60.92-qos-zhb]dis this
qos-profile zhb
scheduler-profile zhb
注:Queue/Drop不绑定,表示使用默认模板。
2.用户限速(vc级)
配置过程:配置调度模板-在domain下绑定qos模板
domain zhb
authentication-scheme default0
accounting-scheme default0
user-group zhb
ip-pool zhb
qos profile zhb
3.Vlan限速(vc group级)
配置过程:配置调度模板-在端口下配置vc组绑定模板-在uservlan下下发模板
[Test2_ME60.92-GigabitEthernet1/0/1]dis this
interface GigabitEthernet1/0/1
vc-group vlan qos-profile zhb
[Test2_ME60.92-GigabitEthernet1/0/1.50]dis this
interface GigabitEthernet1/0/1.50
user-vlan 2 10
qos vc-group vlan (这是对该子接口下的vlan 2 ~10限制的总流量)
或qos vc-group vlan each-vlan (这是对该子接口下的每个vlan进行分别限速) bas
access-type layer2-subscriber default-domain authentication zhb
authentication-method bind
61.188.168.19
lsdxme60
admin@whzx
e8-2
4.子接口限速(vp级)
配置过程:配置调度模板-在端口下配置vp组绑定模板-在子接口下发模板
[Test2_ME60.92-GigabitEthernet1/0/1]dis this
interface GigabitEthernet1/0/1
vp-group subport qos-profile zhb
[Test2_ME60.92-GigabitEthernet1/0/1.50]dis this
interface GigabitEthernet1/0/1.50
qos vp-group subport
user-vlan 50
qos vc-group vlan
bas
access-type layer2-subscriber default-domain authentication zhb authentication-method bind
5.端口限速(物理端口级)
配置过程:配置调度模板-端口下绑定qos模板
[Test2_ME60.92-GigabitEthernet1/0/1]dis this
interface GigabitEthernet1/0/1
qos profile zhb port
[XC-CA-ME60-GigabitEthernet1/0/1.1001-vlan-1001-1020]qos vc-group e8-2 ea
[XC-CA-ME60-GigabitEthernet1/0/1.1001-vlan-1001-1020]qos vc-group e8-2 each-vlan
Operation is running, please wait...fail.
Error!
[XC-CA-ME60-GigabitEthernet1/0/1.1001-vlan-1001-1020]qos vc-group e8-2
Operation is running, please wait...succeed.
[XC-CA-ME60-GigabitEthernet1/0/1.1001-vlan-1001-1020]