EMIF06-MSD02C3;中文规格书,Datasheet资料
August 2010Doc ID 16910 Rev 11/11
EMIF06-mSD02C3
Mini and micro-SD card IPAD?EMI filtering and ESD protection
Features
■EMI low-pass filter
■ESD protection ±15 kV (IEC 61000-4-2) ■Integrated pull up resistors to prevent bus floating when no card is connected ■50 MHz clock frequency compatibility with C line < 20 pF
■Low power consumption
■Easy layout thanks to smart pin-out configuration
■Very low PCB space consuming
■High reliability offered by monolithic integration ■Reduction of parasitic elements thanks to CSP integration ■
Lead-free package
Complies with the following standards:
■
IEC 61000-4-2 level 4 –15 kV (air discharge) –8 kV (contact discharge)
■MIL STD 883G - Method 3015-7 Class 3A ■
SD Specification Part 1, Physical Layer Specification, Version 2.0
Application
Mini and micro (T -Flash) secure digital memory card in:
■Mobile phones
■
Communication systems
The EMIF06-mSD02C3 is a highly integrated device based on IPAD technology offering two functions: ESD protection to comply with IEC standard, and EMI filtering to reject mobile phone frequencies.
TM: IPAD is a trademark of STMicroelectronics
https://www.360docs.net/doc/a411411561.html,
Characteristics EMIF06-mSD02C3
2/11 Doc ID 16910 Rev 1
1 Characteristics
Table 1.
Absolute ratings (limiting values)
Symbol Parameter
Value Unit V PP ESD discharge IEC 61000-4-2, air discharge
ESD discharge IEC 61000-4-2, contact discharge 1515kV V in Maximum input voltage 5.5V T j Maximum junction temperature 125°C T op Operating temperature range - 40 to + 85°C T stg
Storage temperature range
- 55 to + 150
°C
Table 2.
Pin configuration
Pin Signal Pin Signal A1DA TA0C1CMD A2DA TA1C2V ss A3SDDA TA1C3V ss A4SDDA TA0C4SDCMD B1CLK D1DA T A3/CD B2V cc D2DA T A2B3V ss D3SDDA T A2B4
SDCLK
D4
SDDA T A3/CD
EMIF06-mSD02C3Characteristics
Doc ID 16910 Rev 13/11
Table 3.
Electrical characteristic
Symbol Test conditions
Min.Typ.Max.Unit V BR I R = 1 mA 14
16
V
I RM
V RM = 3 V 0.1
μA R1, R2, R3, R4, R5, R6T olerance ± 20 %40Ω R10, R11, R12, R13
T olerance ± 30 %56k Ω R9T olerance ± 30 %
4.7k Ω C line
V = 0 V , F = 1 MHz, V OSC = 30 mV
15
20
pF
Figure 5.
ESD response to IEC 61000-4-2 (+15 kV air discharge) on CLK and data lines
Figure 6.
ESD response to IEC 61000-4-2(-15 kV air discharge) on CLK and data lines
Input
Output
20V/div
5V/div
100 ns/div
Input
Output
20V/div
10V/div
100 ns/div
Characteristics
EMIF06-mSD02C3
4/11 Doc ID 16910 Rev 1
Figure 10.Digital crosstalk
Figure 7.
ESD response to IEC 61000-4-2 (+15 kV air discharge) on V CC line Figure 8.
ESD response to IEC 61000-4-2(-15 kV air discharge) on V CC line
V CL
10V/div
100 ns/div
V CL
10V/div
100 ns/div
generator 81110A
Voltage Probe LeCroy HFP1000
100 k Ω/ 0.7 pF
SDData0
Clk
100 mV/div
1V/div
100 ns/div
EMIF06-mSD02C3Characteristics
Doc ID 16910 Rev 15/11
Figure 12.
Step response without the filter
Figure 13.Step response with the filter
generator 81110A
Voltage probe LeCroy HFP1000
(100 k Ω-0.7 pF)
Output Line “A”SDDatax/CMD/Clk
C = 15 pF F = 52 MHz V = 3V
LOAD 1V/div
5 ns/div
rise@lv = 885 ps,fall@lv = 886 ps
20% - 70% (SD standard)
SDDatax/CMD/Clk
C = 15 pF F = 52 MHz V = 3V
LOAD 1V/div
5 ns/div
rise@lv = 1.705 ns,fall@lv = 2.426 ns
20% - 70% (SD standard)
Characteristics EMIF06-mSD02C3
6/11 Doc ID 16910 Rev 1
EMIF06-mSD02C3Technical information
Doc ID 16910 Rev 1
7/11
2 Technical information
Pull-up resistances R DAT and R CMD are included to prevent bus floating when no card is
inserted or when all card drivers are in high impedance mode.
The pull-up resistors and capacitors described in the above recommendation are integrated in the EMIF06-mSD02C3. This makes the EMIF06-mSD02C3 an easy "plug and play" solution to implement secured T -Flash, mini-SD and micro-SD card terminations.
Ordering information scheme EMIF06-mSD02C3 3 Ordering information scheme
8/11 Doc ID 16910 Rev 1
EMIF06-mSD02C3Package information
Doc ID 16910 Rev 19/11
4 Package information
●Epoxy meets UL94, V0●
Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK ? packages, depending on their level of environmental compliance. ECOPACK ? specifications, grade definitions and product status are available at: https://www.360docs.net/doc/a411411561.html, . ECOPACK ? is an ST trademark.
Ordering information
EMIF06-mSD02C3
10/11 Doc ID 16910 Rev 1
5 Ordering information
Note:
More information is available in the application notes:
AN2348: “Flip Chip: Package description and recommendations for use”AN1751: "EMI Filters: Recommendations and measurements"
6 Revision history
Table 4.
Ordering information
Order code Marking Package Weight Base qty Delivery mode EMIF06-MSD02C3
JP
Flip Chip
3.2 mg
5000
Tape and reel 7”
Table 5.
Document revision history
Date Revision
Changes
12-Aug-2010
1
First issue.
分销商库存信息: STM
EMIF06-MSD02C3