STB13NK60Z-1中文资料

1/14

February 2003

STP13NK60Z/FP,STB13NK60Z STB13NK60Z-1,STW13NK60Z

N-CHANNEL 600V-0.48?-13A TO-220/FP/D 2PAK/I 2PAK/TO-247

Zener-Protected SuperMESH?Power MOSFET

s TYPICAL R DS (on)=0.48?

s EXTREMELY HIGH dv/dt CAPABILITY s 100%AVALANCHE TESTED s GATE CHARGE MINIMIZED

s VERY LOW INTRINSIC CAPACITANCES s

VERY GOOD MANUFACTURING REPEATIBILITY

DESCRIPTION

The SuperMESH?series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH?layout.In addition to pushing on-resistance significantly down,special care is tak-en to ensure a very good dv/dt capability for the most demanding applications.Such series comple-ments ST full range of high voltage MOSFET s in-cluding revolutionary MDmesh?products.

APPLICATIONS

s

HIGH CURRENT,HIGH SPEED SWITCHING s IDEAL FOR OFF-LINE POWER SUPPLIES,ADAPTORS AND PFC s LIGHTING

ORDERING INFORMATION

TYPE V DSS R DS(on)I D Pw STP13NK60Z STP13NK60ZFP STB13NK60Z STB13NK60Z-1STW13NK60Z

600V 600V 600V 600V 600

V

<0.55?<0.55?<0.55?<0.55?<0.55?

13A 13A 13A 13A 13A

150W 35W 150W 150W 150W

SALES TYPE MARKING PACKAGE PACKAGING

STP13NK60Z P13NK60Z TO-220TUBE STP13NK60ZFP P13NK60ZFP TO-220FP TUBE STB13NK60ZT4B13NK60Z D 2PAK TAPE &REEL STB13NK60Z B13NK60Z D 2PAK TUBE

(ONLY UNDER REQUEST)

STB13NK60Z-1B13NK60Z I 2PAK TUBE STW13NK60Z

W13NK60Z

TO-247

TUBE

TO-220

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

2/14

ABSOLUTE MAXIMUM RATINGS

( )Pulse width limited by safe operating area

(1)I SD ≤13A,di/dt ≤200A/μs,V DD ≤V (BR)DSS ,T j ≤T JMAX.(*)Limited only by maximum temperature allowed

THERMAL DATA

AVALANCHE CHARACTERISTICS

GATE-SOURCE ZENER DIODE

(#)When mounted on minimum Footprint

PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES

The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability,but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source.In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity.These integrated Zener diodes thus avoid the usage of external components.

Symbol

Parameter

Value

Unit

STP13NK60Z STB13NK60Z/-1STW13NK60Z

STP13NK60ZFP

V DS Drain-source Voltage (V GS =0)600V V DGR Drain-gate Voltage (R GS =20k ?)600V V GS Gate-source Voltage

±30

V I D Drain Current (continuous)at T C =25°C 1313(*)A I D Drain Current (continuous)at T C =100°C 8.28.2(*)A I DM ( )Drain Current (pulsed)5252(*)A P TOT Total Dissipation at T C =25°C 15035W Derating Factor

1.20

0.27

W/°C V ESD(G-S)Gate source ESD(HBM-C=100pF,R=1.5K ?)4000V dv/dt (1)Peak Diode Recovery voltage slope 4.5

V/ns V ISO Insulation Withstand Voltage (DC)-2500

V T j T stg

Operating Junction Temperature Storage Temperature

-55to 150

°C

TO-220I 2PAK TO-247

D 2PAK

TO-220FP

Rthj-case Thermal Resistance Junction-case Max 0.83

3.6

°C/W Rthj-pcb Thermal Resistance Junction-pcb Max (#)60°C/W Rthj-amb

Thermal Resistance Junction-ambient Max

62.5°C/W T l

Maximum Lead Temperature For Soldering Purpose

300°C

Symbol Parameter

Max Value

Unit I AR Avalanche Current,Repetitive or Not-Repetitive (pulse width limited by T j max)

10A E AS

Single Pulse Avalanche Energy

(starting T j =25°C,I D =I AR ,V DD =50V)

400

mJ

Symbol Parameter

Test Conditions

Min.Typ.

Max.

Unit BV GSO

Gate-Source Breakdown Voltage

Igs=±1mA (Open Drain)

30

V

3/14

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

ELECTRICAL CHARACTERISTICS (T CASE =25°C UNLESS OTHERWISE SPECIFIED)ON/OFF

DYNAMIC

SWITCHING ON

SWITCHING OFF

SOURCE DRAIN DIODE

Note: 1.Pulsed:Pulse duration =300μs,duty cycle 1.5%.

2.Pulse width limited by safe operating area.

3.C oss eq.is defined as a constant equivalent capacitance giving the same charging time as C oss when V DS increases from 0to 80%V DSS .

Symbol Parameter

Test Conditions

Min.Typ.

Max.

Unit V (BR)DSS Drain-source

Breakdown Voltage I D =1mA,V GS =0

600

V I DSS Zero Gate Voltage

Drain Current (V GS =0)V DS =Max Rating

V DS =Max Rating,T C =125°C 150μA μA I GSS Gate-body Leakage Current (V DS =0)V GS =±20V

±10μA V GS(th)Gate Threshold Voltage V DS =V GS ,I D =100μA 3

3.75

4.5V R DS(on)

Static Drain-source On Resistance

V GS =10V,I D =5A

0.48

0.55

?

Symbol Parameter

Test Conditions

Min.

Typ.Max.

Unit g fs (1)Forward Transconductance V DS =8V ,I D =5A

11S C iss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance V DS =25V,f =1MHz,V GS =0

203021048pF pF pF C oss eq.(3)

Equivalent Output Capacitance

V GS =0V,V DS =0V to 480V

125

pF

Symbol Parameter

Test Conditions

Min.

Typ.Max.

Unit t d(on)t r Turn-on Delay Time Rise Time

V DD =300V,I D =5A R G =4.7?V GS =10V

(Resistive Load see,Figure 3)2214ns ns Q g Q gs Q gd

Total Gate Charge Gate-Source Charge Gate-Drain Charge

V DD =480V,I D =10A,V GS =10V

661133

92nC nC nC

Symbol Parameter

Test Conditions

Min.

Typ.Max.

Unit t d(off)t f Turn-off Delay Time Fall Time

V DD =300V,I D =5A R G =4.7?V GS =10V

(Resistive Load see,Figure 3)6112ns ns t r(Voff)t f t c

Off-voltage Rise Time Fall Time

Cross-over Time

V DD =480V,I D =10A,R G =4.7?,V GS =10V

(Inductive Load see,Figure 5)

10920

ns ns ns

Symbol Parameter

Test Conditions

Min.

Typ.

Max.Unit I SD I SDM (2)Source-drain Current

Source-drain Current (pulsed)1040A A V SD (1)Forward On Voltage I SD =10A,V GS =0 1.6

V t rr Q rr I RRM

Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current

I SD =10A,di/dt =100A/μs V DD =35V,T j =150°C (see test circuit,Figure 5)

5704.516

ns μC A

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

4/14

Thermal Impedance For TO-220FP

22

22

5/14

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,

STW13NK60Z

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

6/14

Normalized BVDSS vs Temperature

Source-drain Diode Forward Characteristics

7/14

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

Fig.5:Test Circuit For Inductive Load Switching And Diode Recovery Times

Fig.4:Gate Charge test Circuit

Fig.2:Unclamped Inductive Waveform

Fig.1:Unclamped Inductive Load Test

Circuit

Fig.3:Switching Times Test Circuit For Resistive

Load

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

8/14

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

9/14

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

10/14

1

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

11/14

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

12/14

13/14

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

TUBE SHIPMENT (no suffix)*

TAPE AND REEL SHIPMENT (suffix ”T4”)*

D 2PAK FOOTPRINT

*on sales type

DIM.mm inch MIN.

MAX.MIN.

MAX.A 330

12.992

B 1.50.059

C 12.813.20.5040.520

D 20.20795G 24.426.40.960 1.039N 100

3.937

T

30.4 1.197

BASE QTY BULK QTY 1000

1000REEL MECHANICAL DATA

DIM.mm inch MIN.MAX.MIN.

MAX.

A010.510.70.4130.421B015.715.90.6180.626D 1.5 1.60.0590.063D1 1.59 1.610.0620.063E 1.65 1.850.0650.073F 11.411.60.4490.456K0 4.8 5.00.1890.197P0 3.9 4.10.1530.161P111.912.10.4680.476P2 1.9 2.1

0.0750.082R 50 1.574

T 0.250.350.00980.0137

W

23.7

24.30.9330.956

TAPE MECHANICAL DATA

STP13NK60Z,STP13NK60ZFP,STB13NK60Z,STB13NK60Z-1,STW13NK60Z

14/14Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.

? The ST logo is a registered trademark of STMicroelectronics

? 2003 STMicroelectronics - Printed in Italy - All Rights Reserved

STMicroelectronics GROUP OF COMPANIES

Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.

? https://www.360docs.net/doc/e2784394.html,

相关主题
相关文档
最新文档