913994中文资料

High-density multi-pin connectorsMating and mounting conditions to DIN 41612/IEC 60603-2GeneralWith the ever increasing miniaturization and higher packaging densities in highly integrated circuits there is in many cases a need for more contact interfaces.This development is being met by high-density multi-pin connectors. Efficient wiring techniques such as solderless press-fit permit the user to fit these connectors in the new assemblies.The following sizes are available from ERNI:• Size E 160160 contacts in 5 rows • Size TE 160 (reversed style)160 contacts in 5 rows • Size CD 128128 contacts in 4 rows • Size RD 128 (reversed style)128 contacts in 4 rows The wiring accessories available comprise the ERNI interface connector system KSG 173. This means that mating inter-faces are possible both on the front panel and on the wiring side between the internal and external wiring.To prevent the plug-in cards being confused there is the option of coding the connectors using coding strips, or an alternative method using sizes E 160, TE, CD and RD with coding wedges.Termination techniquesFor the ERNIPRESS solderless press-fit termination technique from ERNI there is a separate data sheet available.For potential applications of the ERNI mating interface system for the front panel and wiring side and for ordering information please refer to the …Mateable transfer wiring-system“ data sheet.This data sheet gives a brief description of the types of coding available for the high-density multi-pin connectors. For exact ordering details there is a separate data sheet available.DIN 41612 Electrical and mechanical characteristics of the connectorsExplanationsPerformance level107Conforms to the requirements as per DIN 41612/IEC 60603-2performance level 1500 mating cyclesContact zone gold-platedTerminal zone tin-plated101As for version 107 but terminal zone gold-plated 207Conforms to the requirementsas per DIN 41612/IEC 60603-2performance level 2400 mating cyclesContact zone gold-platedTerminal zone tin-plated201As for version 207 but terminalzone gold-plated307Conforms to the requirementsas per DIN 41612/IEC 60603-2performance level 350 mating cyclesContact zone gold-platedTerminal zone tin-plated301As for version 307 but terminalzone gold-platedApproval certificatesUL The male and female connectors of size E 160 are approved by the American approvals authority (Under-writers Laboratories Inc.). File no. E 84703CSA For our male and female connectors of size E 160 we have the recognition of the Canadian Standards Associa-tion (CSA). File no. LR 62504.Early make/last break0.8 mm early make/last break male contacts are possible at all positions in rows a, b and c. Other lengths of early make/last break contacts on request.Type CD128E160Reversed type RD128TE160 Maximum number of contacts128160Contact row designation of themale and female connectors abcd abcde Temperature range- 65°... + 125°CPermanent humidityannual average80%, max. 100%Current Arating at+20°C 3.0 ambient+70°C2,0 temperature+100°C1,0Test voltage, 50Hz, 1minContact/contact Vrms1000 Contact/ground Vrms1550Type CD128E160Reversed type RD128TE160 Contact resistance mΩ≤20Insulation resistanceΩ≥1012at 100VDCShock and vibration No contact breakdown proofness at 20g and10...2000HzHousing material of male PBTP 30% GFand female connectors PC 30% GFComparative creepage PBT CTI 275 / CTI 175 M figure acc. to DIN PC CTI 150-175 / CTI 100 M IEC 112 for the plasticService life acc. to DIN 41612, PL* 1 ≥500Part 5, according to performance PL* 2 ≥400levels (in mating cycles)PL* 3 ≥50Mating and withdrawal force 128pin160pin for the assembled connectormax. N≤100≤110Withdrawal force per contact(test blade)N≥0,15Inflammability Non flammable as perPBT UL 94 V-0PC UL 94 V-1*PL = Performance Levels as per DIN 41612 part 5Pre-centeringFor applications of connectors with early make/last breakcontacts the male connector moulding with pre-centering ensures even more reliable mating.The mouldings of the female connectors have a recess at an appropriate point. The dimensions of these versions do not conform to the specifications of DIN 41612/IEC 60603-2. The ordering details are not listed in this data sheet but they can be supplied on request.Male connectors with pre-centering do not fit female connectors without a pre-centering recess.Fastening clipFor efficient mounting of the angled connectors ERNI offers amounting clip.This clip is fitted to the connector at the manufactures’. The connectors are attached to the PC board, max. thickness of pcb= 1,6 mm.Since the clips can also be soldered, plated-through PCB holes are recommended in such applications. Versions with fastening clip on request.Example how to orderDIN 41612Size E 160Design same as size E DIN 41612/IEC 60603-2Dimensional drawingsMale connectorFemale connectorOrdering detailsMale connectors013124Male connectors with early make/last break contacts can be loaded in any position. Further versions on request.For ordering details regarding angled press-fit male connec-tors please refer to the data sheet titled …Plug-in connectors with right-angled press-in terminations“.Female connectorsCrimp-Snap-in Technique913994424871424872594754594983594905ܨEntire length of contacts nickel-plated,transfer zone (5 mm) solid-gold plated.For ordering details regarding female crimp snap-in connectors please refer to the data sheet titled …Connectors for the crimp snap-in technique“.For ordering details regarding female press-fit connectors please refer to the data sheet titled …ERNIPRESS“.Other versions on request.013058013123004778004779004777DIN 41612Size TE 160Reversed style of size E 160Size TE 160 female connectors are fitted with a locating strip.This plastic component is attached to the extended mounting flanges and serves to guide the pins accurately.The extended mounting flanges have two mounting holes at a pitch of 5.08 mm.The length of the mounting flanges provides improved support for the connector on the PC board.Dimensional drawings for size TE 160Male connectorFemale connectorOrdering details for size TE 160Male connectorFemale connectorTo make assembly of the female connectors on the PC board more simple and more reliable a locating strip and extended mounting flanges are supplied.For ordering details for male connectors with press-fit pins please refer to the …ERNIPRESS“ data sheet.Male connectors with early make/last break contacts in rowsa, b, c, d or e are available on request.Further versions on request.013167013166013074013075013073013071013072013070DIN 41612Size CD 1284 rows of contacts, each with up to 32 contacts per rowEspecially for high-density multi-pin connectors the solderless press-fit technique offers advantages in handling,e.g.:• No temperature stress for PC board or connector• Environment-friendly because there is no need for washing after soldering• Even large PC boards can be easily wired• Efficient methods of wiring even for medium-sized batches.Dimensional drawings size CD 128Male connector Female connectorOrdering details size CD 128Male connectorFemale connector023816023762For ordering details regarding female press-fit connectors please refer to the data sheet …ERNIPRESS“.Male connectors with early make/last break contacts in any row are available on request.Other versions on request.DIN 41612Size RD 128reversed style with 4 rows of contacts, each with up to 32 contacts per rowSize RD 128 female connectors are provided with a locating strip.This plastic component is attached to the extended mounting flanges and serves to guide the pins accurately.The extended mounting flanges have two mounting holes at a pitch of 5.08 mm.The length of the mounting flanges provides improved support for the connector on the PC board.170Catalog E 07448404/04Edition Dimensional drawings for size RD 128Male connector Female connector Ordering details for size RD 128Male connectorFemale connectorTo make assembly of the female connectors on the PC board more simple and more reliable a locating strip and extended mounting flanges are supplied.For ordering details for male connectors with press-fit pins please refer to the …ERNIPRESS“ data sheet.Male connectors with early make/last break contacts in rows a, b, c or d are available on request.Further versions on request.013184013183013175013176013174013172013173013171。