C67070-A2902-A67中文资料
CNY70中文资料
Dimensions of CNY70 in mm95 11345www.vishay.Document Number 83751Ozone Depleting Substances Policy StatementIt is the policy of Vishay Semiconductor GmbH to1.Meet all present and future national and international statutory requirements.2.Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs).The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.1.Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively2.Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the EnvironmentalProtection Agency (EPA) in the USA3.Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use.Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, GermanyTelephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423Document Number 83751。
MMPQ2907A中文资料
PD - POWER DISSIPATION (W) 1
Power Dissipation vs Ambient Temperature
20 10 5
30 ns
0.75
SOT-6
t r = 15 V
0.5
2
60 ns
0.25
1 10
100 I C - COLLECTOR CURRENT (mA)
30 V
200 Ω
Ω 1.0 KΩ 0 - 16 V 50 Ω
≤ 200ns
FIGURE 1: Saturated Turn-On Switching Time Test Circuit
15 V
- 6.0 V
1 KΩ Ω
37 Ω
1.0 KΩ Ω 0 - 30 V ≤ 200ns 50 Ω
FIGURE 2: Saturated Turn-Off Switching Time Test Circuit
Max
FMB2907A 700 5.6 180 MMPQ2907A 1,000 8.0 125 240
Units
mW mW/°C °C/W °C/W °C/W
© 1998 Fairchild Semiconductor Corporation
元器件交易网
FFB2907A / FMBT2907A / MMPQ2907A
TA = 25°C unless otherwise noted
Parameter
Value
60 60 5.0 600 -55 to +150
Units
V V V mA °C
Operating and Storage Junction Temperature Range
CA67资料
元器件交易网Cascadable Amplifier 10 to 800 MHzFeatures• AVAILABLE IN SURFACE MOUNT • HIGH EFFICIENCY: +16 dBm (TYP.) OUTPUT POWER AT 32 mA (TYP.) • LOW NOISE FIGURE: <4.0 dB (TYP.) • WIDE POWER SUPPLY RANGE: +5 TO +15 VOLTSA67/ SMA67V2Product ImageDescriptionThe A67 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. Use of an impedance transformer offers the benefit of high dynamic range and high efficiency. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is availableOrdering InformationPart NumberA67 SMA67 CA67PackageTO-8 Surface Mount SMA ConnectorizedElectrical Specifications: Z0 = 50Ω, VCC = +15 VDC ΩTypical ParameterFrequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max) DC Current @ 15 Volts (max) mAAbsolute Maximum RatingsParameterStorage Temperature Case Temperature DC Voltage Continuous Input Power Short Term Input power (1 minute max.)Guaranteed 0º to 50ºC10-800 13.0 ±0.6Units 25ºCMHz dB dB dB dB dBm dBm dBm dBm 10-900 14.0 ±0.3 17 4.0 16.0 +30 +45 Thermal Resistance θjc +50 Transistor Power Dissipation Pd 1.8:1 / 2.0:1 32 1.9:1 / 2.0:1 34 2.0:1 / 2.2:1 35 Junction Temperature Rise Above Case Tjc 4.3 15.5 4.5 15.0Absolute Maximum-62ºC to +125ºC +125ºC +17 V 13 dBm 50 mW 0.5 W +125ºC-54º to +85ºC*10-800 12.5 ±0.7Peak Power (3 sec max.) “S” Series Burn-In Temperature (case)Thermal Data: VCC = +15 VDCParameter Rating45ºC/W 0.269 W 12ºC* Over temperature performance limits for part number CA67, guaranteed from 0oC to +50oC only. 1M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.• North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit for additional data sheets and product information.元器件交易网Cascadable Amplifier 10 to 800 MHzTypical Performance Curves at +25°C Outline Drawing: TO-8 *A67/ SMA67V2WEIGHT: 1 gram (0.04 oz.) maxOutline Drawing: Surface Mount *WEIGHT: 1 gram (0.04 oz.) maxOutline Drawing: SMA Connectorized *WEIGHT: 19 grams (0.67 oz.) max∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.2M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.• North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit for additional data sheets and product information.。
ICS Cutting Tools - 全旋转工具硬质合金级别、钎焊工具和空白品的安全数据表说明书
ICS Cutting ToolsSAFETY DATA SHEETSDS # 02 Date of Issue: May 2014supersedes: July 2013 SECTION 1 - IDENTIFICATIONProduct Name: All Rotary Tool Carbide Grades, Brazed Tools and blanksChemical Name: Tungsten Carbide Product with Cobalt/Nickel binder and Brazed Carbide Products Synonyms: Hard Metal, Cemented WC, Tungsten CarbideProduct Use: Metalworking Tools, Metallurgical Products, Powders and InsertsManufacturer: ICS Cutting Tools, Inc • 511 Main Street • Casco, WI 54205-0125SECTION 2 - HAZARD(S) IDENTIFICATIONNote:Health effects listed are for exposure to metallurgical powders, dust, vapor or mist from grinding, welding or brazing. No health effects have been reported for exposure to this material in solid form.In the form of a powder, this odorless, colorless, gray material may be flammable and may cause respiratory and/or skin irritation. Overexposure to this material in the form of metallurgical powder, dust, vapor or mist from grinding or sweeping is hazardous to health. Cobalt is an eye, skin, and mucous membrane irritant and may cause temporary or permanent respiratory disease. Permanent respiratory disease can lead to disability or death. Preexisting pulmonary and skin conditions such as emphysema, asthma, bronchitis and dermatitis may be aggravated by exposure to this material.Inhalation:Irritant/Sensitizer: 10 mg (Ni)/m3,20 mg (Co)/m3is immediately dangerous to life and health. Acute Overexposure:May cause respiratory tract irritation with wheezing, shortness of breath, and fits of coughing which may produce blood and soreness in the chest. May also cause weight loss, bronchitis, asthma, and inflammation of or damage to lung tissue.Chronic overexposure:May cause build-up of dust in the lungs, allergic respiratory reaction, obstructed airways, and lung damage or disease, with symptoms as described in acute exposure. Previouslyexposed individuals may be at increased risk.Skin Contact:Irritant/Sensitizer: In the form of metallurgical powder, dust, or mist from grinding.Acute Overexposure:May cause irritation with inflammation, rash and itching. May also cause allergic skin reaction if previously exposed. A rash may develop, usually in the flexor areas of the elbow, neck and face.Chronic Overexposure:May cause inflammation and/or rash (irritant or allergic contact dermatitis).Eye Contact:Irritant.Acute Overexposure:May cause irritation with redness, pain and itching.Chronic Overexposure:May cause conjunctivitis.Ingestion:Irritant: In the form of metallurgical powder, dust, or mist from grinding.Acute Overexposure:May cause abnormally low blood pressure and gastrointestinal irritation with pain, vomiting, and sensations of hotness or nausea. Large doses may cause diarrhea. Severe exposure may cause heart damage, convulsions, or enlargement of the thyroid.Chronic Overexposure:May adversely affect the pancreas, thyroid gland, heart, or bone marrow.Material CAS % by OSHA ACGIH NFPA HAZARD RATINGNumber Weight PEL TLV SCALETWA TWA 0-4(mg/m3) (mg/m3) Health Fire ReactivityCEMENTED CARBIDE; Cobaltbinder**Tungsten Carbide (WC) 12070-12- 40-97 15 10 1 0 01*Cobalt (Co) 7440-48-4 3-30 0.1 0.02 2 3 0**Tantalum Carbide (TaC) 12070-06- 0-30 15 10 No 0 03 rating**Titanium Carbide (TiC) 12070-08- 0-15 15 10 No 0 05 rating**Vanadium Carbide (VC) 12070-10- 0-0.5 15 10 No 0 09 rating**Niobium Carbide (NbC) 12069-94- 0-5 15 10 No 0 02 ratingCEMENTED CARBIDE; NickelbinderMay contain any of the above,except cobalt, plus:*Nickel (Ni) 7440-02-0 3-20 1 1.5 2 0 0CEMENTED CARBIDE; coatedMay contain any of the above,except cobalt, plus:Aluminum Oxide (AlO) 1344-28-1 0-0.5 5 10 1 0 0**Titanium Nitride (TiN) 25583-20- 0-0.5 15 10 No 0 04 ratingCEMENTED CARBIDE; brazedproductsMay contain any of the above,except the coatings, plus:**Silver (Ag) 7440-22-4 1-20 0.01 0.1 1 3 3*Copper (Cu) 7440-50-8 1-10 1 1 2 3 0Zinc (Zn) 7440-66-6 1-10 5 None 0 1 1est.CEMENTED CARBIDE; tube rodSame as cemented carbide withcoblat binder, plus:Iron (Fe) 7439-89-6 25-50 10 None 0 3 0est.*Silicomanganese (SiMn) 12743-28- 1-6 5 0.2 3 3 01 (ceiling)*identifies substances that are subject to the requirements of Section 313 of Title Ill of Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.**This substance is regulated by OSHA as a Particulate Not Otherwise Regulated (PNOR). The exposure limits listed for both OSHA and ACGIH refer to total dust; the OSHA PEL for the respirable fraction is 5 mg/m3.SECTION 4 - FIRST AID MEASURESInhalation:If symptoms of pulmonary involvement develop (coughing, wheezing, shortness of breath), remove from exposure area to fresh air immediately. If breathing has stopped, perform artificial respiration. Keep affected person warm and at rest. Get medical attention immediately.Skin Contact:If irritation or rash occurs, remove contaminated clothing and shoes immediately. Wash affected area with soap or mild detergent and large amounts of water until no evidence of material remains (approximately 15-20 minutes). Get medical attention.Eye Contact:If irritation occurs, wash eyes immediately with large amounts of water, occasionally lifting upper and lower lids, until no evidence of material remains (approximately 15-20 minutes). Get medical attention immediately.Ingestion:If this material has been swallowed and person is conscious, immediately give person large amounts of water. Do not attempt to make an unconscious person drink or vomit. Get medical attention immediately. Induce vomiting only if specifically instructed by a physician.Fire and Explosion Hazards:Under rare favoring conditions, finely divided powder or dust from grinding is expected to be a fire and explosion hazard when exposed to high temperatures or ignition sources. Particle size and dispersion in air determine reactivity. This product, except as powder or dust, is not a fire hazard.Flash Point:Not applicable.Firefighting Media:For localized powder fires, smother with dry sand, dry dolomite, sodium chloride or soda ash. Use fire extinguishing media appropriate to fight surrounding fire.Special Firefighting Procedures:Move container from fire area if possible. Cool containers exposed to flame with water from side until well after fire is out. For massive fire in cargo area, use unmanned hose holder or monitor nozzles, or withdraw and let fire burn. Use powdered sodium chloride, or suitable dry powder. Avoid breathing fumes from burning material. Firefighting personnel must use proper respiratory protection and protective fire suits.SECTION 6 - ACCIDENTAL RELEASE MEASURESSteps to be Taken if Material is Released or Spilled:Sweep up with minimum amount of dust generation and place in suitable clean, dry containers for later disposal or reclamation. Residue should be cleaned up using a high efficiency particulate filter vacuum or wet clean up. Use appropriate personal protective equipment including respiratory protection. SECTION 7 - HANDLING AND STORAGEHandling and Storage:Minimize free fall of powder and avoid dispersion of dust in air. Finely divided particles, dust, or fumes may be flammable or explosive. Keep away from sparks or ignition sources. Contents should be stored in a clean, cool area.Other Precautions:Wash hands thoroughly after handling, before eating or smoking. Do not shake clothing, rags or other items to remove dust. Dust should be removed by washing or vacuuming. Periodic examinations are recommended for individuals regularly exposed to dust or mist.SECTION 8 — EXPOSURE CONTROLS/PERSONAL PROTECTIONVentilation:Provide local exhaust ventilation or general dilution to maintain exposure levels below the PEL and TLV. Respiratory Protection for Cobalt:0.05 mg (Co)/m - Single-use approved dust and mist respirator.0.5 mg (Co)/m3- Dust mask, except single-use respirator.1 mg (Co)/m3- Dust mask, except single-use and quarter-mask respirator. Fume or high efficiencyparticulate respirator.5 mg (Co)/m3- High efficiency particulate respirator with a full facepiece. Supplied-air respirator with a full facepiece, helmet or hood. Self-contained breathing apparatus with a full facepiece.20 mg (Co)/m3- Powered air-purifying respirator with a high efficiency filter with a full facepiece. Type "C" supplied-air respirator with a full facepiece operated in pressure-demand or other positive-pressure mode.Respiratory Protection for Nickel:>1 mg(Ni)/m3- Self-contained breathing apparatus with a full facepiece operated in pressure-demand or other positive-pressure mode. Supplied-air respirator with a full facepiece operated in pressure-demand or other positive-pressure mode in combination with an auxiliary SCBA operated in pressure-demand or other positive-pressure mode.Firefighting:Self-contained breathing apparatus with a full facepiece operated in pressure-demand or other positive-pressure mode.Clothing:Employee must wear appropriate protective clothing and equipment to prevent repeated or prolonged skin contact with this substance. Soiled clothing should be laundered separately.Gloves:Employee must wear appropriate protective gloves or barrier creams to prevent contact with this substance.Eye Protection:Safety glasses with side shields or goggles are recommended. Where there is any possibility that an employee's eyes may be exposed to this substance, the employer should provide an eye wash fountain within the immediate work area for emergency use. Contact lenses should not be worn when handling these materials.SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIESAppearance and Odor: Gray powder or solid, no odor Boiling Point: N/A Solubility in Water: Practically insoluble Melting Point: N/A Petroleum Based Solvent Solubility: Practically insoluble Specific Gravity: (H20 = 1): 11 to 15.5SECTION 10 - STABILITY AND REACTIVITYStability:Stable under normal temperatures and pressure.Decomposition:Thermal decomposition may release acrid smoke and irritating fumes.Incompatibilities:Contact of dust with strong oxidizers may cause fire or explosions.SECTION 11 - TOXICOLOGICAL INFORMATIONCobalt:Carcinogenic status: The International Agency for Research on Cancer (IARC) lists Cobalt and Cobalt compoundsas Category 2B carcinogens (Possibly Carcinogenic to Humans). Cobalt fumes or dust may cause pulmonary, skin, or eye irritation. Cobalt may be a sensitizing agent for skin and respiratory system. Chronic exposure may affect the heart, pancreas, thyroid gland, or bone marrow.Rat Oral LD Lo: 1500 mg/kg. Rabbit Oral LD Lo: 20 mg/kgRatlntraperitoneal LD Lo: 250 mg/kg Rabbit lntratracheal LD Lo: 100 mg/kgRat Intravenous LD Lo: 100 mg/kgNickel:Carcinogenic status: The International Agency for Research on Cancer (IARC) lists metallic Nickel and Nickel compounds as Category 2B carcinogens (Possibly Carcinogenic to Humans). Epidemiological studies indicate anincreased incidence of cancer of the nasal cavity, lungs and possibly the larynx in nickel refinery workers. Nickel is an eye, skin, and mucous membrane irritant, and a pulmonary and skin sensitizer.Rat Oral LD Lo: 5 mg/kg. Dog Intravenous LD Lo: 10 mg/kgGuinea Pig Subcutaneous LD Lo: 500 mg/kg Rat Intratracheal LD Lo: 12 mg/kgMouse Intravenous LD Lo: 50 mg/kgCopper:Copper is a skin, eye, and mucous membrane irritant and skin sensitizer. Individuals with chronic respiratory orskin disorders may be at increased risk from exposure.Human Oral LD Lo: 120 mg/kg.SECTION 12 - ECOLOGICAL INFORMATIONNo data are available. Solids and dust should be recycled, if possible, instead of sending to landfill.SECTION 13 - DISPOSAL CONSIDERATIONSWaste Disposal Method: This is a valuable material that should be sent to an appropriate reclamation facility if available. If material cannot be sent to a reclamation facility, disposal should be made in compliance with federal, provincial/state, andlocal environmental regulations.SECTION 14 - TRANSPORT INFORMATIONSome finely divided tungsten carbide powder may be classified as ‘flammable solid‘ according to the Department of Transportation and International Air Transportation Association guidelines. if a regulated powder is resold and shipped inthe same physical form it was received, appropriate labeling, marking, documenting, and placarding must accompany the shipment.SECTION 15 - REGULATORY INFORMATIONSome ingredients in cemented tungsten carbide products, including Tungsten, Cobalt, Nickel, Copper, Chromium and Chromium Compounds, are subject to the requirements of Section 313 of Title III of Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.WHMIS Classification: Class D. Subdivision B. Division 2.In the form of a pressed and sintered item, this is a manufactured article and is not a “controlled product" under WHMIS. SECTION 16 - OTHER INFORMATIONIn case of questions, please call: JOHN JACONI Date Revised: May 2014 Company Name: ICS CUTTING TOOLS, INC. Supercedes: July 2013 Title of Individual: GENERAL MANAGERTelephone Number: (920) 837-2526Although ICS CUTTING TOOLS, INC has attempted to provide current and accurate information herein, ICS CUTTING TOOLS, INC makes no representations regarding the accuracy or completeness of the information and assumes no liablility for any loss, damage, injury of any kind which may result from or arise out of the use of or reliance on the information by any person.。
6RA70
在SIMOREG 整流器订货号后加 字母Z 再加代码(可以是几个),还
可以附带简单的文字说明(如果需要)
A&D Customer SeTeam
Page: 1 - 13
6RA70 的选件
A&D Customer Service and Support _ DS Team
成柜示意图
SIMATIC (optional) Cabinet operator panel Auxiliary contactors SIMOREG 6RA70 Fuses line-supply / armature Main contactor Main switch Control cabling Cable terminals Commutation reactor
*) only 4Q
Page: 1 - 2
6RA70系列 ---- 经过多年验证的该领域的领导者
整流装置电流从 15 到 2000 A 整流柜电流从15 A 到 12000 A
A&D Customer Service and Support _ DS Team Page: 1 - 3
各种型号
A&D Customer Service and Support _ DS Team
Page: 1 - 4
装置连线示意
AC field DC field Tacho or encoder Line protection Electronics box E-stop
Electronics power supply
Power interface
Control terminals
Screening connection rail
AO4707中文资料
Symbol Units R θJL R θJL40°C/WMaximum Junction-to-Ambient A Steady-State 6775Maximum Junction-to-Lead CSteady-State2530Maximum Junction-to-AmbientA t ≤ 10s R θJA 36°C/W5421Thermal Characteristics Schottky Maximum Junction-to-Ambient A t ≤ 10s R θJA 2475Maximum Junction-to-Lead CParameter: Thermal Characteristics MOSFETTyp Max Steady-State 3040Maximum Junction-to-Ambient ASteady-State AO4707AO4707SymbolMin TypMaxUnits BV DSS -30V -1T J =55°C-5I GSS ±100nA V GS(th)-1.2-2-2.4V I D(ON)40A 24.533T J =125°C334156m Ωg FS 14.5S V SD -0.76-1V I S-4.2A C iss 920pF C oss 190pF C rss 122pF R g3.6ΩQ g (10V)18.4nC Q g (4.5V)9.3nC Q gs 2.7nC Q gd 4.9nC t D(on)7.1ns t r 3.4ns t D(off)18.9ns t f 8.4ns t rr 21.5ns Q rr12.5nC SCHOTTKY PARAMETERS V F 0.480.52V0.070.154.2201560C T120pF THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,FUNCTIONS AND RELIABILITY WITHOUT NOTICEMaximum Body-Diode Continuous CurrentInput Capacitance Output Capacitance Turn-On DelayTime DYNAMIC PARAMETERS V GS =0V, V DS =-15V, f=1MHz Gate Drain Charge Total Gate Charge (10V)V GS =-10V, V DS =-15V, I D =-8ATurn-On Rise Time Turn-Off DelayTime V GS =-10V, V DS =-15V, R L =1.8Ω, R GEN =3ΩGate resistanceV GS =0V, V DS =0V, f=1MHzTurn-Off Fall TimeSWITCHING PARAMETERSTotal Gate Charge (4.5V)Gate Source Charge m ΩV GS =-4.5V, I D =-5AI S =-1A,V GS =0VV DS =-5V, I D =-8AR DS(ON)Static Drain-Source On-ResistanceForward TransconductanceDiode Forward Voltage I DSS µA Gate Threshold Voltage V DS =V GS I D =-250µA V DS =-24V, V GS =0VV DS =0V, V GS =±20V Zero Gate Voltage Drain Current Gate-Body leakage current Electrical Characteristics (T J =25°C unless otherwise noted)STATIC PARAMETERS Parameter Conditions Body Diode Reverse Recovery TimeBody Diode Reverse Recovery Charge I F =-8A, dI/dt=100A/µsDrain-Source Breakdown Voltage On state drain currentI D =-250µA, V GS =0V V GS =-10V, V DS =-5V V GS =-10V, I D =-8AReverse Transfer Capacitance I F =-8A, dI/dt=100A/µsForward Voltage Drop I F =3.0AI rm Maximum reverse leakage current V R =24VmAV R =24V, T J =125°C V R =24V, T J =150°C Junction CapacitanceV R =15VA: The value of R θJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The value in any given application depends on the user's specific board design. The current rating is based on the t ≤ 10s thermal resistance rating.B: Repetitive rating, pulse width limited by junction temperature.C. The R θJA is the sum of the thermal impedence from junction to lead R θJL and lead to ambient.D. The static characteristics in Figures 1 to 6,12,14 are obtained using 80 µs pulses, duty cycle 0.5% max.E. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The SOA curve provides a single pulse rating. Rev4: August 2005AO4707AO4707AO4707。
MPS2907A三极管
JIANGSU CHANGJIANG ELECTRONICS TECHNOLOGY CO., LTD TO-92 Plastic-Encapsulate TransistorsMPS2907ATRANSISTOR (PNP)FEATURESComplementary NPN Type available (MPS2222A)MAXIMUM RATINGS (T a =25℃ unless otherwise noted)ELECTRICAL CHARACTERISTICS (T a =25℃ unless otherwise specified)ParameterSymbolT est conditionsM in T yp Max UnitCollector-base breakdown voltage V (BR)CBOI C =-10μA,I E =0 -60 V Collector-emitter breakdown voltage V (BR)CEOI C =-10mA,I B =0 -60 V Emitter-base breakdown voltage V (BR)EBO I E =-10μA,I C =0 -5 V Collector cut-off current I CBOV CB =-50V,I E =0 -10 n A Collector cut-off current I CEXV CE =-30V,V EB(off)=-0.5V -50 nAEmitter cut-off current I EBO V EB =-3V,I C =0 -10 nA h FE(1) V CE =-10V,I C =-0.1mA 78h FE(2)V CE =-10V,I C =-150mA 100 300DC current gainh FE(3) V CE =-10V,I C =-500mA 52 V CE(sat) I C =-150mA,I B =-15mA -0.4 VCollector-emitter saturation voltage V CE(sat) I C =-500mA,I B =-50mA -0.67 V V BE(sat) I C =-150mA,I B =-15mA -1 V Base-emitter saturation voltage V BE(sat) I C =-500mA,I B =-50mA -1.2 V Transition frequency f T V CE =-20V,I C =-50mA,f=100MHz 200 MHzDelay time t d10 n sRise time t rI B1=-I B2=-15mAV CC =-30V,Ic=-150mA, 25 n s Storage time t S225 n s Fall timet fV CC =-6V,Ic=-150mA, I B1=-I B2=-15mA60 n sCLASSIFIC A TION OF h FE(2)Ra n k LHRa n ge100-200 200-300TO-921. EMITTER2. BASE3. COLLECTORB ,Jul ,2012【南京南山半导体有限公司 — 长电三极管选型资料】-10-1000100200300400500255075100125150-0.1-1-10-100-0.01-0.1-1-0-40-80-120-160-200h FE —— -4T R A N S I T I O N F R E Q U E N C Y f T (M H z )COLLECTOR CURRENT I C (mA)MPS2907ATypical CharacterisiticsI CAMBIENT TEMPERATURE T a ()℃-600C O L L E C T O R C U R R E N T I C (m A )C O L L E C T O R -E M I T T E R S A T U R A T I O NV O L T A G E V C E s a t (V )Static CharacteristicC O L L E C T O R C U R R E N T I C (m A )B ,Jul ,2012 【南京南山半导体有限公司 — 长电三极管选型资料】 【南京南山半导体有限公司 — 长电三极管选型资料】Sponge strip2000 pcsSponge strip The top gasketLabel on the Inner BoxPlastic bagLabel on the Outer BoxInner Box: 333 mm ×162mm ×43mmOuter Box: 350 mm × 340mm × 250mmQA LabelSeal the box with the tapeStamp “EMPTY” on the empty boxInner Box: 240 mm ×165mm ×９５mmLabel on the Inner BoxOuter Box: 525 mm × 360mm × 262mmLabel on the Outer BoxQA LabelSeal the box with the tapeStamp “EMPTY” on the empty box。
rexroth 轴向柱塞马达 a6ve 系列 6x 配件资料说明书
rexroth轴向柱塞马达A6VE系列6x配件资料A6VE系列相关型号说明：A6VE28A6VE55A6VE80A6VE107A6VE160A6VE250力士乐马达相关系列型号说明：A2FE型号：A2FE107-61W-VZL171A2FE80/61W-VZL191A2FE90/61W-VAL100A2FE56/61W-VZL100A2FE80/61W-VAL020A2FE63/61W-VZL181-KA2FE28/61W-PAL10A2FE80/61W-VZL100A2FM型号：A2FM160/61W-VAB010A2FM80/61W-VBDA2FM63/61WVAB027A2FM80/61W-VUX027A2FMF56/61W-VAB027A2FM125/61W-VAB010A2FM90/61W-VAB010A2FM107/61W-VAB010A2FM63/61W-VAB010A2FM160/61W-VAB010A2FM80/61W-VAB010A2FM63/61W-VAB027A2F0型号：A2F012/61R-PPB06A2F056/61R-PPB05A2F012/61R-PP06A2F016/61R-PPB06A2F0200/63R-VBB05A2F0160/61R-PPB05A2F0125/61R-PBB05A2F063/61R-PBB0512N00A2F016/61R-PABOSA2F032/61R-PABOSA2F023/GL-PAB05A2FO10/61R-PAB06原装进口，质保一年！我们以具有绝对竞争优势的价格、原厂出货的品质、不同规格产品的库存以及热诚的态度为您服务。
合格的产品质量，优质的服务，与工业自动化的产品结合，是公司的主要经营线路。
上海金仟丝机械设备有限公司，总部位于中国经济中心上海，在美国、德国等欧美国家都有分公司。
长期经营机械设备、仪器仪表、电线电缆、液压元器件、传感器、机电设备、电子产品、阀门、环保设备、化妆品销售等。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Diode Power Module
• Inside fast free-wheeling diode
• Package with insulated metal base plate
• Diode especially for brake choppers
• matched with BSM 300 GA 170 DN 2 E 3166
Type V R25I FDC Package Ordering Code
BYM 600 A 170 DN21700V600A SINGLE DIODE 1C67070-A2902-A67
Maximum Ratings
Parameter Symbol Values Unit
Diode reverse voltage T j = 25 °C V R25
1700
V
DC current T C = 25 °C T C = 80 °C I FDC
400
600
A
Pulsed diode current, t p = 1 ms T C = 25 °C
T C = 80 °C I Fpuls
800
1200
i 2 t-value, Diode, t P = 10 ms, T j = 150 °C∫i 2t 96800A2s Power dissipation per Diode P D 1400W Chip temperature T j+ 150°C Storage temperature T stg -40 ... + 125
Thermal resistance, chip case R thJC ≤ 0.09K/W Insulation test voltage, t = 1min.V is 4000Vac Creepage distance- 20mm Clearance- 11
DIN humidity category, DIN 40 040- F sec IEC climatic category, DIN IEC 68-1- 40 / 125 / 56
Electrical Characteristics
, at T j = 25 °C, unless otherwise specified
Parameter Symbol Values Unit
min.typ.max.
Free-Wheel Diodes
Diode forward voltage
I F = 300 A, V GE = 0 V, T j = 25 °C I F = 300 A, V GE = 0 V, T j = 125 °C V F
-
-
1.8
2
-
2.5
V
Reverse current
V CA = 1700 V, T j = 25 °C V CA = 1700 V, T j = 125 °C I R
-
-
4.4
1.1
-
1.6
mA
Reverse recovery time
I F = 300 A, V R = -1200 V, V GE = 0 V d i F/dt = -1500 A/µs,
T j = 125 °C t rr
- 1-
µs
Reverse recovery charge
I F = 300 A, V R = -1200 V, V GE = 0 V d i F/dt = -1500 A/µs
T j = 25 °C
T j = 125 °C Q rr
-
-
100
28
-
-
µC
Power dissipation P tot = ƒ(T C )
parameter: T j ≤ 150 °C
20
40
60
80
100
120
°C
160
T C
100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 W 1500 P tot
Transient thermal impedance Diode Z th JC = ƒ(t p )
parameter: D = t p / T
10 10 10 10 10 10
Z thJC
10
10
10
10
10
10
s t p
Forward characteristics of fast recovery reverse diode I F = f(V F ) parameter: T j
0.0
0.5
1.0
1.5
2.0
2.5
V 3.5
V F
0 50 100 150 200 250 300 350 400 450 500 A
600 I F
T j =25°C
=125°C
j T
Terms & Conditions of Usage
Attention
The present product data is exclusively subscribed to technically experienced staff. This Data Sheet is describing the specification of the products for which a warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its specifications. Changes to the Data Sheet are reserved.
You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. Should you require product information in excess of the data given in the Data Sheet, please contact your local Sales Office via “ / sales & contact”.
Warning
Due to technical requirements the products may contain dangerous substances. For information on the types in question please contact your local Sales Office via “ / sales & contact”.。