RJ-2412D中文资料

合集下载

RP40-2412DGW中文资料

1=Natural Convection, 2=200LFM, 3=300LFM, 4=400LFM, 5=500LFM 1 2 3 45
125 100 75 Output Power (%) 50 25
Natural Convection
0 -40 -25 -10 0 40 50 60 70 80 90 100 110 55 Ambient Temperature Range (°C)
RP40-243.3SGW RP40-2405SGW RP40-2412SGW RP40-2415SGW RP40-483.3SGW RP40-4805SGW RP40-4812SGW RP40-4815SGW RP40-2412DGW RP40-2415DGW RP40-4812DGW RP40-4815DGW
元器件交易网
Features
Regulated Converters
● ● ● ● ● ● ● ●
4:1 Wide Input Voltage Range 40 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Six-Sided Shield No Derating to 55°C Standard 2” x2” Package and Pinning Efficiency to 86%
* no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard * add /N for CTRL function with Negative Logic (0=ON, 1=OFF)

350JJ122U040C中文资料

High Frequency, Solid Aluminum TopType 350’s solid aluminum top assures extremely low impedance. With a typical 4 to 6 nH ESL, the self reso-nant frequency is well above 100 kHz. The very low ESR assures the low impedance rating. The capacitors are ﬁtted with three rugged welded mounting leads to provide maximum resistanceHighlightsOperates to beyond 200 kHz Less than 10 nH ESL Solid aluminum top•••SpeciﬁcationsCapacitance Range:Voltage Range:Capacitance Tolerance:Operating Temperature Range:Shelf Life:Leakage Current:Cold Impedance:Ripple Current Multipliers:Load Life:Shelf Life:Vibration:90 to 11,000 F 6.3 to 100 Vdc –10 +75%–55 ºC to +105 ºC 500 hours @ +105 ºC ≤0.5 √CV µA at +25 ºC–55 º multiple of +25 ºC Z ≤6 for 6.3 V, 3 for 10 to 50 V, 2 for 75 & 100 V45 ºC 55 ºC 65 ºC 75 ºC 85 ºC 95 ºC 105 ºC 1.661.521.371.201.000.750.36Ambient TemperatureFrequency60 Hz120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up 6.3 to 20 V 0.530.650.730.900.95 1.0025 to 35 V 0.450.550.650.850.92 1.0050 to 75 V0.360.500.600.800.90 1.00100 V0.290.400.520.750.871.004,000 h @ +105 ºC at full load ∆ Capacitance ±10% ESR 150% of limit DCL 100% of limit500 h @ 105 ºC, capacitance, ESR and DCL, initial requirement10 to 55 Hz, 0.06” and 10 g max, 2 h in each planeOutline DrawingL.025±.015S1 S2DT ±.015Complies with the EU Directive 2002/95/EC requirementrestricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE).Case DimensionsPart Numbering System350JP 1152U 6R3 C Type Case Code Capacitance Tolerance Voltage Insulation 350See table900 = 90 µF U = –10 +75%6R3 = 6.3 Vdc O = Bare can161 = 160 µF T = –10 +50%063 = 63 Vdc B = Plastic insulation with epoxy 882 = 8800 µF 100 = 100 VdcC = Plastic insulation, no epoxy1152 = 11500 µFCase InchesCode Nominal Insulated S1S2TD x L D x L ±0.015±0.015GE 3/4 x 1 1/8 0.775 x 1.157 0.20.100.3GJ 3/4 x 1 5/8 0.775 x 1.657 0.20.100.3GL 3/4 x 2 1/8 0.775 x 2.157 0.20.100.3GP 3/4 x 2 5/8 0.775 x 2.657 0.20.100.3HE 7/8 x 1 1/8 0.900 x 1.157 0.30.150.4HJ 7/8 x 1 5/8 0.900 x 1.657 0.30.150.4HL 7/8 x 2 1/8 0.900 x 2.157 0.30.150.4HP 7/8 x 2 5/8 0.900 x 2.657 0.30.150.4JJ1 x 1 5/81.025 x 1.6570.30.150.4Typical Performance CurvesType 350 Impedance vs. FrequencyI m p e d a n c e (Ω)Frequency (Hz)10010k 100k 10001M 10M0.0010.010.11.0103,400 µF 6.3 Vdc6,100 µF 6.3 Vdc11,500 µF 6.3 VdcType 350 Operating Life in Kilohours vs. Ripple Current00.10.20.30.40.50.60.70.80.911Rated Ripple-Current MultipleE x p e d t e d O p e r a t i n g L i f e , k h105 ºC95 ºC85 ºC75 ºC 65 ºC 55 ºC45 ºC 1.1 1.2 1.3 1.4 1.5101001000Typical Performance CurvesRatingsESR Max ΩImped.Ripple Nom Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in)(µF)Part Number 120 Hz 20 kHz 100 kHz 20 kHz DxL 6.3 Vdc (8.5 Vdc Surge)1600350GE162U6R3C 0.0870.0430.040 3.23/4 x 1 1/8 2400350HE242U6R3C 0.0650.0350.034 3.77/8 x 1 1/8 3000350GJ302U6R3C 0.0500.0250.025 4.63/4 x 1 5/8 3400350JE342U6R3C 0.0580.0310.031 4.0 1 x 1 1/8 4200350GL422U6R3C 0.0350.0180.019 6.63/4 x 2 1/8 4400350HJ442U6R3C 0.0370.0200.022 5.67/8 x 1 5/8 5400350GP542U6R3C 0.0290.0150.0178.03/4 x 2 5/8 6100350JJ612U6R3C 0.0330.0180.020 6.2 1 x 1 5/8 6300350HL632U6R3C 0.0270.0150.0187.57/8 x 2 1/8 8300350HP832U6R3C 0.0220.0130.0168.87/8 x 2 5/8 8800350JL882U6R3C 0.0240.0140.0168.1 1 x 2 1/8 11000350JP113U6R3C 0.0200.0120.0159.6 1 x 2 5/8 7.5 Vdc (10 Vdc Surge)1500 350GE152U7R5C 0.0910.0440.040 3.23/4 x 1 1/8 2300350HE232U7R5C 0.0680.0350.034 3.77/8 x 1 1/8 2700350GJ272U7R5C 0.0520.0260.025 4.63/4 x 1 5/8 3200350JE322U7R5C 0.0590.0310.030 3.9 1 x 1 1/8 3900350GL392U7R5C 0.0370.0180.019 6.63/4 x 2 1/8 4200350HJ422U7R5C 0.0390.0210.022 5.67/8 x 1 5/8 5100350GP512U7R5C 0.0300.0150.0167.93/4 x 2 5/8 5800350JJ582U7R5C 0.0340.0180.019 6.1 1 x 1 5/8 6000350HL602U7R5C 0.0280.0150.0187.47/8 x 2 1/8 7900350HP792U7R5C 0.0230.0130.0168.87/8 x 2 5/8 8400350JL842U7R3C 0.0250.0140.0168.0 1 x 2 1/8 11000350JP113U7R5C0.0200.0120.0149.51 x2 5/810 Vdc (12 Vdc Surge)1400350GE142U010C 0.0980.0450.040 3.13/4 x 1 1/8 2100350HE212U010C 0.0720.0350.034 3.67/8 x 1 1/8 2600350GJ262U010C 0.0550.0260.025 4.53/4 x 1 5/8 3000350JE302U010C 0.0620.0320.030 3.6 1 x 1 1/8 3800350GL382U010C 0.0390.0190.019 6.53/4 x 2 1/8 3900350HJ392U010C 0.0410.0210.022 5.57/8 x 1 5/8 4800350GP482U010C 0.0310.0150.0167.83/4 x 2 5/8 5400350JJ542U010C0.0360.0190.0205.71 x 1 5/8ESR Max ΩImped.Ripple Nom Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in)(µF)Part Number 120 Hz 20 kHz 100 kHz 20 kHz DxL 10 Vdc (12 Vdc Surge)5600350HL562U010C 0.0300.0150.0187.37/8 x 2 1/8 7300350HP732U010C 0.0240.0130.0168.77/8 x 2 5/8 7800350JL782U010C 0.0260.0140.0167.5 1 x 2 1/8 10000350JP103U010C0.0210.0120.0159.0 1 x 2 5/8 12 Vdc (18 Vdc Surge)1100350GE112U012C 0.1080.0460.042 3.13/4 x 1 1/8 1700350HE172U012C 0.0790.0360.034 3.67/8 x 1 1/8 2000350GJ202U012C 0.0610.0270.025 4.43/4 x 1 5/8 2400350JE242U012C 0.0670.0320.031 3.8 1 x 1 1/8 2900350GL292U012C 0.0440.0190.020 6.43/4 x 2 1/8 3000350HJ302U012C 0.0450.0210.022 5.47/8 x 1 5/8 3700350GP372U012C 0.0350.0160.0177.73/4 x 2 5/8 4200350JJ422U012C 0.0380.0290.020 6.0 1 x 1 5/8 4400350HL442U012C 0.0320.0160.0187.27/8 x 2 1/8 5800350HP582U012C 0.0260.0130.0168.67/8 x 2 5/8 6100350JL612U012C 0.0280.0140.0167.8 1 x 2 1/8 8000350JP802U012C0.0230.0120.0159.3 1 x 2 5/8 16 Vdc (20 Vdc Surge)950350GE951U016C 0.1160.0470.042 3.03/4 x 1 1/8 1500350HE152U016C 0.0850.0370.035 3.57/8 x 1 1/8 1700350GJ172U016C 0.0660.0270.025 4.33/4 x 1 5/8 2000350JE202U016C 0.0710.0330.031 3.7 1 x 1 1/8 2500350GL252U016C 0.0470.0200.020 6.33/4 x 2 1/8 2600350HJ262U016C 0.0480.0220.022 5.37/8 x 1 5/8 3200350GP322U016C 0.0370.0160.0177.63/4 x 2 5/8 3600350JJ362U016C 0.0410.0190.020 5.9 1 x 1 5/8 3800350HL382U016C 0.0340.0160.0187.17/8 x 2 1/8 4900350HP492U016C 0.0280.0130.0168.47/8 x 2 5/8 5200350JL522U016C 0.0290.0140.0167.7 1 x 2 1/8 6800350JP682U016C0.0240.0120.0159.2 1 x 2 5/8 20 Vdc (25 Vdc Surge)800350GE801U020C 0.1250.0480.042 3.03/4 x 1 1/8 1200350HE122U020C 0.0890.0380.035 3.57/8 x 1 1/8 1500350GJ152U020C 0.0700.0280.026 4.23/4 x 1 5/8 1700350JE172U020C0.0750.0330.0313.71 x 1 1/8ESR vs. Temperature Characteristics (10 kHz)-55-40-20025406085105Temperature (ºC)0.1110100Capacitance vs. Temperature (120 Hz)-55-40-20025406085105708090100110≥ 50 Vdc ≤ 40 Vdc E S R - R a t i o t o 25 ºC V a l u eC a p a c i t a n c e - % o f 25 ºC V a l u eTemperature (ºC)≥ 75 Vdc6.3 VdcESR Max ΩImped.Ripple Nom Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in) (µF)Part Number120 Hz20 kHz100 kHz20 kHz DxL20 Vdc (25 Vdc Surge)2100350GL212U020C 0.0500.0200.020 6.23/4 x 2 1/8 2200350HJ222U020C 0.0510.0220.022 5.37/8 x 1 5/8 2800350GP282U020C 0.0400.0170.0177.53/4 x 2 5/8 3000350JJ302U020C 0.0430.0200.020 5.8 1 x 1 5/8 3200350HL322U020C 0.0360.0160.0187.07/8 x 2 1/8 4200350HP422U020C 0.0290.0140.0168.37/8 x 2 5/8 4500350JL452U020C 0.0310.0140.0167.6 1 x 2 1/8 5900350JP592U020C 0.0250.0120.0159.1 1 x 2 5/825 Vdc (30 Vdc Surge)600350GE601U025C 0.1400.0500.042 2.93/4 x 1 1/8 900350HE901U025C 0.1000.0390.035 3.47/8 x 1 1/8 1100350GJ112U025C 0.0790.0290.026 4.13/4 x 1 5/8 1300350JE132U025C 0.0820.0340.031 3.6 1 x 1 1/8 1500350GL152U025C 0.0560.0210.020 6.03/4 x 2 1/8 1600350HJ162U025C 0.0570.0230.022 5.17/8 x 1 5/8 2000350GP202U025C 0.0440.0170.0177.33/4 x 2 5/8 2300350HL232U025C 0.0400.0170.018 6.87/8 x 2 1/8 2300350JJ232U025C 0.0470.0200.021 5.6 1 x 1 5/8 3100350HP312U025C 0.0320.0140.0168.27/8 x 2 5/8 3300350JL332U025C 0.0340.0150.01774.0 1 x 2 1/8 4300350JP432U025C 0.0270.0130.0168.9 1 x 2 5/830 Vdc (40 Vdc Surge)450350GE451U030C 0.1550.0520.043 2.83/4 x 1 1/8 700350HE701U030C 0.1100.0410.035 3.37/8 x 1 1/8 800350GJ801U030C 0.0880.0300.026 4.03/4 x 1 5/8 950350JE951U030C 0.0890.0360.032 3.4 1 x 1 1/8 1100350GL112U030C 0.0620.0220.02 5.83/4 x 2 1/8 1200350HJ122U030C 0.0620.0240.023 5.07/8 x 1 5/8 1500350GP152U030C 0.0480.0180.0177.13/4 x 2 5/8 1700350JJ172U030C 0.0500.0210.021 5.5 1 x 1 5/8 1800350HL182U030C 0.0440.0170.018 6.67/8 x 2 1/8 2300350HP232U030C 0.0350.0150.0168.07/8 x 2 5/8 2500350JL252U030C 0.0360.0160.0177.2 1 x 2 1/8 3200350JP322U030C 0.0290.0130.0168.6 1 x 2 5/840 Vdc (50 Vdc Surge)320350GE321U040C 0.1760.0540.043 2.73/4 x 1 1/8 500350HE501U040C 0.1230.0420.035 3.27/8 x 1 1/8 600350GJ601U040C 0.1000.0310.026 3.93/4 x 1 5/8 700350JE701U040C 0.0990.0370.032 3.4 1 x 1 1/8 850350GL851U040C 0.0700.0230.02 5.73/4 x 2 1/8 900350HJ901U040C 0.0700.0250.023 4.97/8 x 1 5/8 1100350GP112U040C 0.0550.0180.017 6.93/4 x 2 5/8 1200350JJ122U040C 0.0560.0220.021 5.4 1 x 1 5/8 1300350HL132U040C 0.0490.0180.018 6.57/8 x 2 1/8 1700350HP172U040C 0.0390.0150.0167.97/8 x 2 5/8 1800350JL182U040C 0.0400.0160.0177.1 1 x 2 1/8 2300350JP232U040C 0.0320.0130.0168.51 x2 5/8 Ratings。

RQD-1212P中文资料

25.000 20.000 25.000 20.000
Deviation / Load
Deviation from Nominal (%)
15.000 10.000 5.000 0.000 -5.000 -10.000
Deviation from Nominal (%)
0505
3.305
15.000 10.000 5.000 0.000 -5.000 -10.000
Bottom View
12.00 0.55
Top View
1 2
2.54
1.20
8 NC NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm
10 PIN SMD Package
15.24 14.70 5.35 1.65 2.54x4 7.30
8.15 7.90 10 7
1209
3.309
Efficiency %
Efficiency %
20 0
20 0
0509
3.305
0% 20% 40% 60% 80% 100%
0%
20%
40%
60%
80%
100%
Total Output current (%)
Total Output current (%)
Deviation / Load
12
July-2006

元器件交易网
RQS & RQD Series
Package Style and Pinning (mm)
8 PIN SMD Package
3rd angle projection
12.75 12.10 5.35 1.65 2.54 x 3 7.30

RJ-2412SH中文资料

Deviation / Load
25.000 20.000
Deviation / Load
Deviation from Nominal (%)
15.000 10.000 5.000 0.000 -5.000 -10.000
Deviation from Nominal (%)
Deviation from Nominal (%)
100 80 60
RG-xx09D
Efficiency / Load
80 60 40
1215
0505
1205
0509
0515 Efficiency % 3.315
40 20 0
1209 3.309
Efficiency %
20 0
3.305
Efficiency %
100%
20 0
0%
20%
40%
60%
ECONOLINE
DC/DC-Converter
RJ & RG Series
1 Watt DIP14 Single & Dual Output
Input Voltage (VDC) 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24

RTD-2412中文资料

Dual –Vin +Vin Com –Vout +Vout No Pin NC
XX.X ± 0.5 mm XX.XX ± 0.25 mm
EC 50
August 2002

ECONOLINE - DC/DC-Converter
RTS/RTD Series, 2 Watt, SMD (Single & Dual Output) Package Style and Pinning (mm)
Dual Output Single Output
3rd angle projection
Recommended Footprint Details
Pin Connections
10 12.பைடு நூலகம்0 1 2
7 12.70 4 5 1.20 1.80
8 1 2
5 4 1.20 1.80
Pin # Single 1 –Vin 2 +Vin 4 –Vout 5 +Vout 7 No Pin 8 NC 10 No Pin NC = No Connection
元器件交易网
ECONOLINE - DC/DC-Converter
RTS/RTD Series, 2 Watt, SMD (Single & Dual Output) Features
● ● ●
1kVDC Isolation Efficiency to 70% UL 94V-0 Package Material
Specifications (Core Operating Area) and Operating Temperature / Derating-Graph
Input Voltage Range Output Voltage Accuracy Rated Power Isolation Voltage Isolation Resistance (Viso = 500VDC) Isolation Capacitance Ripple and Noise (20MHz BW) Line Voltage Regulation Load Voltage Regulation (10% to 100% full load) 3.3V output type 5V output type 9V, 12V, 15V output types 24V output type ±10% ±5% 2W 1000VDC min. 10 GΩ min. 40pF min./115pF max. 150mVp-p max. 1.2%/1% of Vin 20% max. 15% max. 10% max. 10% max. 70% min. 1 Second -40°C to +71°C -55°C to +125°C Single output types Dual output types August 2002 2.1g 2.5g EC 49

FN2410 FN2412 标准性能单相过滤器说明书

DATA SHEETStandard Performance Single-Phase Filters FN2410 and FN2412EMC/RFI Filters for Industrial ElectronicsExcellent filter performance for applications with high interference levelsFilters for two-phase supply up to 2x 520 VAC (P-P) availableFast and comfortable snap-in installation on popular TS 35 DIN-rails up to 45 A Industrial grade terminal blocks for unsurpassed electrical safetyPerformance indicatorsTechnical SpecificationsMaximum continuous operating voltage 2x 520/300 VAC (FN 2410 H/FN 2412 H)1x 250 VAC (FN 2410/FN 2412)Operating frequencyDC to 400 HzRated currents8 to 45 A @ 50°C (FN 2412)8 to 100 A @ 50°C (FN 2410)High potential test voltageP –> P 2250 VDC for 2 sec (H types)P –> E 2000 VAC for 2 sec P –> N 1100 VDC for 2 secP –> E 2700 VDC for 2 sec (H types)Protection category IP 20Overload capability4x rated current at switch on,1.5x rated current for 1 minute, once per hour Temperature range (operation and storage)-25°C to +100°C (25/100/21)Flammability corresponding to UL 94 V-2 or betterDesign corresponding toUL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939MTBF @ 50°C/250 V (Mil-HB-217F)1,200,000 hours250,000 hours (H types)Approvals & CompliancesFeatures and BenefitsTypical ApplicationsFN 2410 filters up to 100 A are designed for traditional chassis mountingFor extra fast installation, FN 2412 filters up to 45 A can comfortably be snapped-in on popular TS 35DIN-rails which are common in most electrical cabinetsBoth FN 2410 and FN 2412 are also avail- able as …H versions“. These are ideally suitable for anoperation on two phases in a three-phase power network, handling voltages up to 520 VAC All filters provide an exceptional conductedattenuation performance, based on chokes with high saturation resistance and excellent thermal behavior. Thus, all filters retain the expected filter performance even in very noisy applications and under full load conditionsTouch-safe industrial grade terminal blocks provide maximum electrical safety and protect humans from undeliberate contact with life conductors. They help to fulfill the mostdemanding installation standardsSmall to medium-sized machines and industrial equipmentHigh-end single-phase power supplies Single-phase variable speed motor drives,inverters and convertersDIN-rail filter versions are ideal for panel building and electrical cabinetsVarious noisy applications with higher power single-phase or two-phase supply Typical electrical schematicFilterRated current Leakage current*Power loss Input/Output Weight@ 50°C (40°C)@ 250 VAC /50 Hz @ 25°C/50 Hzconnections(@ 120 VAC /60 Hz)[A][mA][W][kg]FN 2410-8-448 (8.8) 2.60 (1.49) 2.6-440.4FN 2410-16-4416 (17.5) 2.60 (1.49) 3.5-440.5FN 2410-25-3325 (27.4) 2.60 (1.49) 5.5-330.6FN 2410-32-3332 (35.0) 2.60 (1.49) 5.6-330.7FN 2410-45-3345 (49.3) 2.60 (1.49)7.4-330.7FN 2410-60-3460 (65.7) 2.60 (1.49) 5.5-34 1.8FN 2410-80-3480 (87.6) 2.60 (1.49)9.9-34 1.8FN 2410-100-34100 (109.5)2.60 (1.49)15.4-34 1.8FN 2410 H-8-448 (8.8) 2.60 (1.49) 2.6-440.5FN 2410 H-16-4416 (17.5) 2.60 (1.49)3.5-440.6FN 2410 H-25-3325 (27.4) 2.60 (1.49) 5.5-330.7FN 2410 H-32-3332 (35.0) 2.60 (1.49) 5.6-330.8FN 2410 H-60-3460 (65.7) 2.60 (1.49) 5.5-34 1.9FN 2410 H-80-3480 (87.6) 2.60 (1.49)9.9-34 1.9FN 2410 H-100-34100 (109.5)2.60 (1.49)15.4-34 1.9FN 2412-8-448 (8.8) 2.60 (1.49) 2.6-440.4FN 2412-16-4416 (17.5) 2.60 (1.49)3.5-440.6FN 2412-25-3325 (27.4) 2.60 (1.49) 5.5-330.7FN 2412-32-3332 (35.0) 2.60 (1.49) 5.6-330.8FN 2412-45-3345 (49.3) 2.60 (1.49)7.4-330.8FN 2412 H-8-448 (8.8) 2.60 (1.49) 2.6-440.5FN 2412 H-16-4416 (17.5) 2.60 (1.49) 3.5-440.7FN 2412 H-25-3325 (27.4) 2.60 (1.49) 5.5-330.8FN 2412 H-32-3332 (35.0)2.60 (1.49)5.6-330.9* Maximum leakage under normal operating conditions (acc. to IEC60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level.Filter Selection TablePer CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym Typical Filter Attenuation8 to 45 A types60 to 100 A typesMechanical DataFN 2410 (H)FN 2412 (H)FN 2410FN 24128 A16 A 25 A 32 A 45 A 60 A 80 A 100 A 8 A 16 A 25 A 32 A 45 A A 130130130130130165165165110110110110110B 93939393931151151159393939393C 62627676761001001007373878787D 108108108108108140140140E 120120120120120155155155F 7070707070909090G 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3H 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2I 22222525253939392222252525JM6M6M6M6M6M8M8M8M6M6M6M6M6Rec. torque (Nm) 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.08.0 - 9.08.0 - 9.08.0 - 9.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0 3.5 - 4.0L17.517.531.531.531.539.239.239.228.528.542.542.542.5All dimensions in mm; 1 inch = 25.4 mmTolerances according: ISO 2768-m/EN 22768-mDimensions-33-34-44Solid wire 16 mm 235 mm 210 mm 2Flex wire 10 mm 225 mm 2 6 mm 2AWG type wire AWG 6AWG 2AWG 8Recommended torque1.5-1.8 Nm4.0-4.5 Nm1.0-1.2 NmPlease visit to find more details on filter connectors.Filter Input/Output Connector Cross SectionsTo find your local partner within Schaffner‘s global network © 2022 Schaffner GroupThe content of this document has been carefully checked and understood.However,neither Schaffner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof.Published specifica-tions are subject to change without notice.Product suitability for any area of application must ultimately be determined by the customer.In all cases,products must never be operated outside their published specifications.Schaffner does not guarantee the availability of all published products.This disclaimer shall be governed by substantive Swiss law and resulting disputes shall be settled by the courts at the place of business of Schaffner Holding test publications and a complete disclaimer can be downloa-ded from the Schaffner website.All trademarks recognized.Headquarters, Global Innovation and DevelopmentSwitzerlandSchaffner Holding AG Industrie Nord Nordstrasse 11e 4542Luterbach+41 32 681 66 26******************Sales and Application CentersChinaSchaffner EMC Ltd. ShanghaiT20-3 C, No 565 Chuangye Road,Pudong district 201201Shanghai+86 2138139500*********************FinlandSchaffner Oy Sauvonrinne 19 H 8500Lohja+358 50 468 7284**************************FranceSchaffner EMC S.A.S.16-20 Rue Louis Rameau 95875Bezons+33 1 34 34 30 60*************************GermanySchaffner Deutschland GmbH Schoemperlenstrasse 12B 76185Karlsruhe +49 721 56910**************************IndiaSchaffner India Pvt. Ltd Regus World Trade CentreWTC, 22nd Floor Unit No 2238, Brigade Gateway Campus, 26/1, Dr. Rajkumar Road Malleshwaram (W)560055Bangalore+91 8067935355************************ItalySchaffner EMC S.r.l.Via Ticino, 3020900Monza (MB)+39 039 21 41 070************************JapanSchaffner EMC K.K.ISM Sangenjaya 7F1-32-12 Kamiuma, Setagaya-ku 154-0011Tokyo+81 3 5712 3650************************SingaporeSchaffner EMC Pte Ltd.Blk 3015A Ubi Road 1, #05-09, Kampong Ubi Industrial Estate 408705Singapore +65 63773283****************************SpainSchaffner EMC EspañaCalle Caléndula 93, Miniparc III, Edificio E El Soto de Moraleja, Alcobendas 28109Madrid+34 917 912 900************************SwedenSchaffner EMC AB Östermalmstrorg 1114 42Stockholm+46 8 5050 2425*************************SwitzerlandSchaffner EMV AG Industrie Nord Nordstrasse 11e 4542Luterbach+41 32 681 66 26******************************TaiwanSchaffner EMV Ltd.U-Town20 Floor-2, No 97, Section 1, XinTai 5th Road,XiZhi District 22175New Taipei City +886 226975500*************************ThailandSchaffner EMC Co. Ltd.Sathorn Square TowerRoom 3780, 37FL, 98 North-Sathorn Rd,Silom, Bangrak 10500Bangkok+66 621056397***************************United Kingdom Schaffner Ltd.1, Oakmede Place Terrace Road RG42 4JF Binfield+44 118 9770070*********************United StatesSchaffner EMC Inc.52 Mayfield Avenue Edison, New Jersey +1 732 225 9533**********************。

SAE J2412测试标准

SAE J2412测试标准SAE J2412标准介绍1. 范围1.1 SAE J2412标准规定了应用可控辐照度氙弧灯装置对各种类型的汽车内饰件进行加速暴露的试验方法。

1.2 是建立在SAE J1885试验参数的性能标准。

1.3 本标准不包括试验的持续时间，样品的制备，及性能的评价步骤，这些指标在不同的汽车制造厂商的材料说明中有所涉及。

1.4 合格的实验设备是通过SAE J1885认可的设备及计划来做SAE J2412试验的设备之间的材料试验比较来确定的。

要有一份明确的试验协议。

试验双方必须通过做材料试验来比较新的试验设备与先前认可的设备。

利害关系的一方要详细地规定试验协议的内容及所试验的材料。

在本试验方法出版公布时，委员会要以SAE J2413为编号，题目为“验证新的试验设备的草案”。

1.5 任何对本标准中试验方法的偏离，如过滤器的连接，必须获得试验双方同意2.参考2.1规范性引用文件下列文件中的条款通过本标准的引用而成为本标准的条款，SAE的最新版本适用于本标准。

2.1.1 SAE 标准源自于SAE ，400 Commonwealth Drive, Warrendale, PA 15096-0001SAE J1767 确定汽车内饰件材料色牢度的色差测量方法SAE J1885 应用可控辐照度水冷式氙弧灯装置对汽车内饰材料进行加速暴露的试验方法2.1.2 ASTM 标准源自于ASTM,100 Barr Harbor Drive, West Conshohocken,PA 19428-2959 ASTM D859 水中二氧化硅的测试方法ASTM D 4517使用无火焰原子吸收光谱法测定高纯度水中低浓度二氧化硅总量的试验方法ASTM G 113 有关非金属材料自然及人工气候老化试验的专门术语ASTM G 130 使用光谱辐射计校准窄带和宽带紫外辐射计的标准试验方法ASTM G 147 自然与人工气候老化试验用非金属材料的状态调节和处置标准操作规程ASTM G 151 在采用实验室光源的加速试验设备中对非金属材料进行暴露的标准操作规程ASTM G 155 对非金属材料进行暴露的氙弧灯装置标准操作规程2.1.3 相关的标准American Association of Textile Chemists and Colorists (AATCC)美国纺织化学师与印染师协会P.O. Box 12215,Research Triangle Park, Norht Carolina 27709AATCC 评价程序1AATCC L-2蓝色羊毛耐光标准织物AATCC L-4蓝色羊毛耐光标准织物3.定义3.1黑板温度计一种温度测量装置，涂有黑色涂层的传感器，在褪色/老化试验中，可以吸收大部分的辐射能量。

2412D DataTwist 2400 Category 6+ 网络线缆说明书

Product:2412DDataTwist 2400 Category 6+ Cable, 4 Pair, U/UTP, PVC Indoor CPR EcaProduct DescriptionCategory 6 Enhanced Premise Horizontal Cable (300MHz), 4-Pair, 24 AWG Solid Bare Copper Conductors, U/UTP, Polyethylene Insulation, PVC CMR rated jacketTechnical SpecificationsProduct OverviewConstruction DetailsConductorInsulationCable CoreOuter JacketElectrical CharacteristicsElectricalsDelayHigh Frequency62.515 dB/100m49.147.134.132.134.931.921.532.610019.3 dB/100m45.843.826.524.530.827.820.83020028.3 dB/100m40.938.912.610.622.821.819.52725032.1 dB/100m39.337.37.2 5.222.819.81826.530035.6 dB/100m38.136.1 2.50.521.318.317.5Table Notes:Limits below 4 MHz are for information only. Reference standard: IEC 61156-5VoltageVoltage Rating72 V DCMechanical CharacteristicsTemperatureOperating Installation-20°C to +75°C0°C To +50°CBend RadiusStationary Min.Installation Min.22 mm (0.87 in)44 mmMax. Pull Tension:80 N (18 lbf)Bulk Cable Weight:33 kg/kmStandards and ComplianceEnvironmental Suitability:Indoor - Euroclass EcaFlammability / Reaction to Fire:IEC 60332-1-2CPR Compliance:CPR Euroclass: EcaIEEE Compliance:PoE: IEEE 802.3bt Type 1, Type 2, Type 3, Type 4Data Category:Category 6TIA/EIA Compliance:ANSI/TIA 568.2-DISO/IEC Compliance:ISO/IEC 11801-1CENELEC Compliance:EN 50173-1, Segregation class according EN50174-2 = aEuropean Directive Compliance:EU CE MarkUK Regulation Compliance:UKCA MarkProduct NotesNotes:Electrical values are expected performance based on cable testing and representative performance within a typical Belden system.HistoryUpdate and Revision:Revision Number: 0.267 Revision Date: 12-12-2023Part NumbersVariantsItem #Color Putup Type Length EAN2412D.10305Black Reel305 m87196050049702412D.06305Blue Reel305 m87196050049012412D.06A305Blue Reel-in-Box305 m87196050049322412D.08305Gray Reel305 m87196050049492412D.05A305Green Reel-in-Box305 m87196050048952412D.02A305Red Reel-in-Box305 m87196050048642412D.09305White Reel305 m87196050049562412D.09A305White Reel-in-Box305 m87196050049632412D.04305Yellow Reel305 m87196050048712412D.04A305Yellow Reel-in-Box305 m8719605004888© 2023 Belden, IncAll Rights Reserved.Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability.Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.All sales of Belden products are subject to Belden's standard terms and conditions of sale.All sales of Belden products are subject to Belden's standard terms and conditions of sale.Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

100 80 60
RG-xx09D
Efficiency / Load
80 60 40
1215
0505
1205
0509
0515 Efficiency % 3.315
40 20 0
1209 3.309
Efficiency %
20 0
3.305
Efficiency %
100%
20 0
0%
20%
40%
60%
Input Voltage Range Output Voltage Accuracy Line Voltage Regulation Load Voltage Regulation (10% to 100% full load) Output Ripple and Noise (20MHz limited) Operating Frequency Efficiency at Full Load No Load Power Consumption Isolation Voltage Rated Working Voltage Isolation Voltage Rated Working Voltage Isolation Capacitance Isolation Resistance Short Circuit Protection P-Suffix Operating Temperature Range (free air convection) Storage Temperature Range Relative Humidity Package Weight H-Suffix H-Suffix (tested for 1 second) (long term isolation) (tested for 1 second) (long term isolation) 1.8V, 3.3V output types 5V output type 9V, 12V, 15V, 24V output types ±10% ±5% 1.2%/1% of Vin typ. 20% max. 15% max. 10% max. 100mVp-p max. 57kHz min. / 90kHz typ. / 105kHz max. 70% min. / 80% typ. 102mW min./180mW typ./260mW max. 3000VDC min. see Application Notes. 4000VDC min. see Application Notes
● ● ● ● ● ●
Dual Output from a Single Input Rail 3kVDC & 4kVDC Isolation Optional Continuous Short Circuit Protected Custom Solutions Available UL94V-0 Package Material Efficiency to 84%
80%
100%
Total Output current (%)
0% 20% 40% 60% Total Output current (%)
80%
0% 20% 40% 60% Total Output current (%)
80%
100%
Deviation / Load
25.000 20.000 25.000 20.000
ECONOLINE
DC/DC-Converter
RJ & RG Series
1 Watt DIP14 Single & Dual Output
Input Voltage (VDC) 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24 1.8, 3.3, 5, 9, 12, 15, 24
Deviation from Nominal (%)
3.305
0505
3.309
0509
15.000 10.000 5.000 0.000 -5.000 -10.000
0512
1212
1205
1209
3.312
0% 20% 40% 60% Total Output current (%) 80% 100%
100 80 60 100
RJ-xx12S
Efficiency / Load
80 60
3.305
1205
0509
0512
1212
0505 Efficiency %
40 20 0
1209 Efficiency % 3.309
Efficiency %
40 20 0
3.312
20 0
0% 20% 40% 60% Total Output current (%)
25.000 20.000
Deviation / Load
Deviation from Nominal (%)
Deviation from Nominal (%)
15.000 10.000 5.000 0.000 -5.000 -10.000
15.000 10.000 5.000 0.000 -5.000 -10.000
using MIL-HDBK 217F RJ types RG types
using MIL-HDBK 217F RJ types RG types
Typical Characteristics
RJ-xx05S
Efficiency / Load
100 80 60 40
RJ-xx09S
Efficiency / Load
Safe Operating Area
85 Operating Temperature °C
-40
0
50
100
150

July-2006
35
元器件交易网
ECONOLINE
DC/DC-Converter
Specifications (Core Operating Area)
ECONOLINE
DC/DC-Converter
Typical Characteristics
RJ & RG Series
RG-xx15D
Efficiency / Load
100 80 60
RG-xx12D
Efficiency / Load
100 80 60 40
1212
0512
0515
3.315
3.312 Efficiency %
0% 20% 40% 60% Total Output current (%)
80%
100%
0% 20% 40% 60% Total Output current (%)
80%
100%
RJ-xx15S
Efficiency / Load
100 80 60 40 100
RG-xx05D
Efficiency / Load
MTBF (+25°C) (+85°C)
RJ & RG Series
992 x 103 hours 1012 x 103 hours 145 x 103 hours 151 x 103 hours
}
Detailed Information see Application Notes chapter "MTBF"
Output Power (%)
100 80 60 40 30 20 0
Derating-Graph
(Ambient Temperature)
20pF min. / 65pF max. 15 GΩ min. 1 Second Continuous -40°C to +85°C (see Graph) -55°C to +125°C 95% RH 2.5g continued on next page
80%
100%
0% 20% 40% 60% Total Output current (%)
80%
100%
0%
20%
40%
60%
80%
100%
Total Output current (%)
Deviation / Load
25.000 20.000 25.000 20.000
Deviation / Load
Deviation / Load
25.000 20.000
Deviation / Load
Deviation from Nominal (%)
15.000 10.000 5.000 0.000 -5.000 -10.000
Deviation from Nominal (%)
Deviation from Nominal (%)
0515
3.315
15.000 10.000 5.000 0.000 -5.000 -10.000
3.305