HD04中文资料

合集下载

HD74LS04P中文资料

HD74LS04 / HD74LS05Hex Inverters / Hex Inverters (with Open Collector Outputs)REJ03D0391–0300Rev.3.00Jul.13.2005 Features• Ordering Information• HD74LS04Part Name Package Type Package Code(Previous Code)PackageAbbreviationTaping Abbreviation(Quantity)HD74LS04P DILP-14pin PRDP0014AB-B(DP-14AV)P —HD74LS04FPEL SOP-14 pin (JEITA) PRSP0014DF-B(FP-14DAV)FP EL (2,000 pcs/reel)HD74LS04RPEL SOP-14 pin (JEDEC) PRSP0014DE-A(FP-14DNV)RP EL (2,500 pcs/reel)• HD74LS05Part Name Package Type Package Code(Previous Code)PackageAbbreviationTaping Abbreviation(Quantity)HD74LS05P DILP-14pin PRDP0014AB-B(DP-14AV)P —HD74LS05FPEL SOP-14 pin (JEITA) PRSP0014DF-B(FP-14DAV)FP EL (2,000 pcs/reel)HD74LS05RPEL SOP-14 pin (JEDEC) PRSP0014DE-A(FP-14DNV)RP EL (2,500 pcs/reel)Note: Please consult the sales office for the above package availability. Pin ArrangementCircuit Schematic (1/6)Absolute Maximum RatingsUnitRatingsItem SymbolSupply voltage V CC Note 7 VInput voltage V IN 7 V Power dissipation P T 400 mW Storage temperature Tstg –65 to +150 °CNote: Voltage value, unless otherwise noted, are with respect to network ground terminal.Recommended Operating Conditions• HD74LS04MaxUnitMinTypItem SymbolSupply voltage V CC 4.75 5.00 5.25 VI OH — — –400 µAOutput currentI OL — — 8 mA°C2575Operating temperature Topr–20• HD74LS05MaxUnitTypMinItem SymbolSupply voltage V CC 4.75 5.00 5.25 VOutput voltage V OH — — 5.5 VOutput current I OL — — 8 mA°C7525–20Operating temperature ToprElectrical Characteristics• HD74LS04(Ta = –20 to +75 °C)ItemSymbol min. typ.* max. Unit Condition V IH 2.0 — — V Input voltageV IL — — 0.8 V V OH 2.7 — — V V CC = 4.75 V, V IL = 0.8 V, I OH = –400 µA— — 0.5 I OL = 8 mAOutput voltageV OL— — 0.4 V I OL = 4 mAV CC = 4.75 V, V IH = 2 V I IH — — 20 µA V CC = 5.25 V, V I = 2.7 V I IL — — –0.4 mA V CC = 5.25 V, V I = 0.4 VInput current I I — — 0.1 mA V CC = 5.25 V, V I = 7 V Short-circuit outputcurrent I OS –20— –100 mA V CC = 5.25 V I CCH — 1.2 2.4 mA V CC = 5.25 VSupply currentI CCL — 3.6 6.6 mA V CC = 5.25 VInput clamp voltage V IK — — –1.5 V V CC = 4.75 V, I IN = –18 mA Note: * V CC = 5 V, Ta = 25°C• HD74LS05(Ta = –20 to +75 °C)ItemSymbol min. typ.* max. Unit Condition V IH 2.0 — — VInput voltageV IL — — 0.8 V— — 0.5 I OL = 8 mAOutput voltage V OL — — 0.4 V I OL = 4 mAV CC = 4.75 V, V IH = 2 VOutput current I OH — — 100 µA V CC = 4.75 V, V IL = 0.8 V, V OA = 5.5 VI IH — — 20 µA V CC = 5.25 V, V I = 2.7 VI IL — — –0.4 mA V CC = 5.25 V, V I = 0.4 VInput current I I —— 0.1 mA V CC = 5.25 V, V I = 7 V I CCH — 1.2 2.4 mA V CC = 5.25 VSupply currentI CCL —3.6 6.6 mA V CC = 5.25 V Input clamp voltage V IK — — –1.5 V V CC =4.75 V, I IN = –18 mA Note: * V CC = 5 V, Ta = 25°CSwitching Characteristics• HD74LS04(V CC = 5 V, Ta = 25°C)Item Symbol min. typ. max. Unit Conditiont PLH — 9 15 nsPropagation delay timet PHL — 10 15 ns C L = 15 pF, R L = 2 k Ω• HD74LS05(V CC = 5 V, Ta = 25°C)Item Symbol min. typ. max. Unit Conditiont PLH — 17 32 nsPropagation delay time t PHL — 15 28 nsC L = 15 pF, R L = 2 k ΩNote: Refer to Test Circuit and Waveform of the Common Item "TTL Common Matter (Document No.: REJ27D0005-0100)".Package Dimensions RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001Renesas Technology Korea Co., Ltd.Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, KoreaTel: <82> 2-796-3115, Fax: <82> 2-796-2145Renesas Technology Malaysia Sdn. Bhd.Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, MalaysiaTel: <603> 7955-9390, Fax: <603> 7955-9510。

HD74HC04P中文资料

2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.
8.65
9.05 Max
14
8
1
7
3.95 1.75 Max
0.635 Max
0.11 0.04
1.27 *0.40 ± 0.06
0.14
+ –
0.15 0.25 M
*Pd plating
*0.20 ± 0.05
Unit: mm
6.10
+ –
0.10 0.30
1.08
0.60
+ –
0.67 0.20
Vin = VIH or VIL IOH = –20 µA
IOH = –4 mA IOH = –5.2 mA Vin = VIH or VIL IOL = 20 µA
IOL = 4 mA IOL = 5.2 mA Vin = VCC or GND Vin = VCC or GND, Iout = 0 µA
HD74HC04
Hex Inverters
Features
• High Speed Operation: tpd = 7.5 ns typ (CL = 50 pF) • High Output Current: Fanout of 10 LSTTL Loads • Wide Operating Voltage: VCC = 2 to 6 V • Low Input Current: 1 µA max • Low Quiescent Supply Current: ICC (static) = 1 µA max (Ta = 25°C)

SN74LS674DWG4中文资料

Copyright © 1988, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.POST OFFICE BOX 655303 • DALLAS, TEXAS 752652POST OFFICE BOX 655303 • DALLAS, TEXAS 752653 POST OFFICE BOX 655303 • DALLAS, TEXAS 752654POST OFFICE BOX 655303 • DALLAS, TEXAS 752655 POST OFFICE BOX 655303 • DALLAS, TEXAS 752656POST OFFICE BOX 655303 • DALLAS, TEXAS 75265IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedIMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedIMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedIMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedIMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedIMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。

HD SERIES 重型基板说明书

®HD SERIESIDEAL FOR SITES WHERE RUGGEDTREATMENT IS ANTICIPATED.•16-gauge steel front cover, 20-gauge back panel.•Alternating element guide brackets and cabinet spacer brackets spot welded to back panel every 12 inches. Provides rigid support to resist impact damage.•Cover secured by screws every 12 inches.•Choice of 5 heating elements.Self-tapping screws secure the cover in place at each bracket location.Element “H”“D”H-141⁄16"13H-3, H-435⁄8"15H-5X 4"13H-6X4"13HD SERIESComplete Enclosure AssemblyP ACKAGING: Complete two-piece enclosure assem-bly factory packaged with necessary brackets and hangers. Order element separately.CONSTRUCTION: Full back panel with interlockingslope top front panel. Pencil-proof louvers. Bracket with element guide spot welded to back panel every 24 inches alternating with cabinet spacer welded to back panel every 24 inches giving rigid support to front every 12 inches. There are dimpled anchoring holes every 12 inches. For fasteningfront to brackets, use 8 x 1⁄2self tapping screws with countersunk head as supplied with cover.DEPTH: 3 1⁄2"HEIGHTS: 8 1⁄2" (one tier), 14" (one or two tier)LENGTHS: 2’, 3’, 31⁄2’, 4’, 5’, 6’, 7’, 8’.Other 1⁄2’ lengths available to order.MA TERIAL: 16-gauge steel front cover, 20-gaugeback panel.FINISH: Electro galvanized is standard. Available incustom color baked enamel finish.ELEMENTS: Choice of five elements. Copper withaluminum fins: H-1, H-3, H-4, H-5X. Steel with aluminized steel fins: H-6X. Lengths from 2 to 8 feet.DAMPER: OptionalJOINTS: T elescopic cover accessories eliminate theneed to perfectly butt one length of cover to the next, reducing need for field cutting. Critical linear and vertical tolerances are eliminated because telescopic assembly absorbs misalignment that might result from uneven floors and walls.Custom heights and configurationsavailableAll accessories are provided with holes for8 x 3⁄8pan head screws to secure accessory to cover.Access doors: 6" x 6"Also available:8" valve cover 4" wall trim3" splice plate set* Based on 65˚F entering air temperature.† Millinches per foot.Note: Ratings are based on active finned length (3" less than overall length), and include 15% heating effect factor.Use 4 GPM ratings only when flow is known to be equal to or greater than 4 GPM; otherwise 1 GPM ratings must be used.HD SeriesFurnish and install as shown on the plans HDSeries–– slope-top baseboard with element, required mounting components and accessories as manufactured by Slant/Fin Corporation. Complete two-piece enclosure assembly shall consist of full back panel with interlocking slop top front panel, factory packaged with necessary brackets.Front cover shall be fabricated from 16-gaugesteel, back panel from 20-gauge steel. The front panel &accessories shall be finished in hot dipped wiped coat galvanized finish or as custom color matched as per specifications. Fin-tube element (s) shall be Model––––––––––––––. Provide lengths, heights and capaci-ties as scheduled on plans.Bracket with element guide shall be spot weldedto back panel every 24 inches alternating with cabinet spacer welded to back panel every 24 inches giving rigid support to front every 12 inches. There are dimpled anchoring holes every 12 inches. For fastening front to brackets, use 8 ⁄ self tapping screws with countersunk head as supplied by others. T amper proof screws are available as an option.Provide all required accessories for a completeinstallation. Cover accessories shall be telescopic toeliminate the need to perfectly butt one length of cover to the next.H-1 ElementFurnish and install H-1 baseboard heating ele-ment as manufactured by Slant/Fin Corporation, consist-ing of 3⁄4" nominal copper tubing, with 3" x 3 1⁄4" x .024"aluminum fins, spaced 48 per linear foot. The tubing shall not be weakened by expansion in process of manu-facture, but shall be forced through undersized fin holes to obtain a force-fit mechanical bond. A flange with four teeth shall be formed on each fin to increase thermal contact and to space and lock the fins uniformly in place. One end of each element tube shall be expanded to receive the unexpanded end of another, without couplings.H-3 ElementFurnish and install H-3 baseboard heating ele-ment as manufactured by Slant/Fin Corporation, consist-ing of 3⁄4" nominal copper tubing, with 35⁄32" x 21⁄2" x .011"aluminum fins bent to 2 3⁄4" x 2 1⁄2", spaced 55 per linear foot. The tubing shall not be weakened by expansion in process of manufacture, but shall be forced through undersized fin holes to obtain a force fit mechanical bond. A flange with four teeth shall be formed on each fin to increase thermal contact and to space and lock the fins uniformly in place. One end of each element tube shall be expanded to receive the unexpanded end of another, without couplings.H-4 ElementFurnish and install H-4 baseboard heating ele-ment as manufactured by Slant/Fin Corporation, consist-ing of 1" nominal copper tubing, with 315⁄32" x 21⁄2" x .011"aluminum fins bent to 3" x 2 1⁄2", spaced 48 per linear foot. The tubing shall not be weakened by expansion in process of manufacture, but shall be forced through undersized fin holes to obtain a force-fit mechanical bond. A flange with four teeth shall be formed on eachfin to increase thermal contact and to space and lock the fins uniformly in place. One end of each element tube shall be expanded to receive the unexpanded end of another, without couplings.H-5X ElementFurnish and install H-5X baseboard heatingelement as manufactured by Slant/Fin Corporation, con-sisting of 11⁄4" nominal copper tubing, with 3" x 3 1⁄4" x .020" aluminum fins, spaced 48 per linear foot. The tubing shall not be weakened by expansion in process of manu-facture, but shall be forced through undersized fin holes to obtain a force-fit mechanical bond. A flange with four teeth shall be formed on each fin to increase thermal contact and to space and lock the fins uniformly in place. One end of each element tube shall be expanded to receive the unexpanded end of another, without couplings.H-6X ElementFurnish and install H-6X baseboard heatingelement as manufactured by Slant/Fin Corporation, con-sisting of 11⁄4" IPS steel pipe (Schedule 40), with 3" x 31⁄4" x .025" steel fins, spaced 48 per linear foot. The pipe shall not be weakened by expansion in process of man-ufacture, but shall be forced through undersized fin holes to obtain a force-fit mechanical bond. A flange with four teeth shall be formed on each fin to increase thermal contact and to space and lock the fins uniformly in place.Both ends of each element pipe shall be threaded with IPS standard threads.© Slant/Fin Corp. 2008. Printed in U.S.A 708. Publication No. HD-10HD SERIES Heavy Duty Baseboard。

维修人员培训HD理论中文(2024)

识和规范操作的习惯。
2024/1/29
24
考核标准制定及实施过程
考核标准是衡量维修人员技能水平的重要依据，应根据行业标准和实际需求来制定。
考核标准应包括理论考试和实践操作考试两部分，其中实践操作考试应占较大比重。
2024/1/29
在实施考核过程中，应确保考核的公正性、客观性和准确性，避免出现主观评分和舞弊现象。
目前，HD理论已经成为设备维修和管理领域的重要理论体系之一。
9
HD理论核心思想
预防性维修
预测性维修
通过对设备进行定期检查和保养，及时发现并处理潜在故障，避免设备故障的发生。
利用先进的监测和诊断技术，对设备运行状态进行实时监测和预测，提前发现故障迹象并采取相应的维修措施。
根本原因分析
维修效率提升
26
THANKS
感谢观看
2024/1/29
27
2024/1/29
13
案例分析：成功应用HD理论解决维修问题
01
02
03
04
案例一
某型导弹发射装置故障快速定位与修复
案例二
基于HD理论的复杂电子系统故障诊断与排除
案例三
运用HD理论实现航空发动机维修流程优化
案例四
智能化维修辅助系统在装备保障中的应用
2024/1/29
14
04
培训课程设计与实施
程。
案例二
某维修人员在检修设备时，误操作导致设备损坏。事故原因分析：维修人员专业技能不足，对设
备性能及操作规程不熟悉。
案例三
某维修人员在维修过程中，与客户发生争执，导致客户投诉。事故原因分析：维修人员服务态度不佳，缺乏良好的沟通和解决问

Libav DL-HDM44A-H2 四入四出HDMI 2.0矩阵开关说明书

11675 Ridgeline Drive Colorado Springs, CO 80918Rev 180823Phone: 719-260-0061Toll-Free: 800-530-8998Fax: 719-260-0075DL-HDM44A-H2 Quick Install GuideThis guide is for quick installation only. For complete owners manual go to or use a QR reader to access the manual via QR code below.Scan QR Code with your Smart-phone or TabletDL-HDM44A-H2 Quick Guide2The DigitaLinx DL-HDM44A-H2 is a four input by four output HDMI 2.0 matrix switcher with HDCP 2.2 support and capable of handling resolutions up 4K@60Hz 4:4:4 / 8 bit color with static and dynamic HDR output support for each channel. The matrix features advanced independent EDID management control for each HDMI input as well as an Easy EDID analyzer. The analog and digital audio outputs on the DL-HDM44A-H2 can be set to follow the HDMI video route or can be independently routed either by API or web control interface. Built in re-clocking circuitry ensures the switcher is backwards compatible with sources with older HDMI version chip sets.The DL-HDM44A-H2 can be controlled via front panel buttons, front panel IR, external IR, remote IR, RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus control via web user interface.Product OverviewPackage Contents•DL-HDM44A-H2 Matrix Switcher •Quick Install Guide •(1) Matrix IR Remote •(1) IR Receiver (38KHz)•(1) AC power adapter with US, UK, EU and AU power plugs •(4) Phoenix Male Connector (3.5mm, 3 Pins)• (2) Rack mounting clips with mounting screwsDL-HDM44A-H2 Quick Guide3Front Panel View1. OUTPUT CHANNEL INDICATOR - Indicates input for output port 1-42. IR - Receives signals from IR remote3. INPUT 1-4 - Input 1-4 selection buttons4. OUTPUT 1-4 - Output 1-4 selection buttons5. CLEAR - Clear button, clears the selection operation6. TAKE - Take button, implements input selection7. STORE - Store button, tores the matrix routes to preset8. RECALL - Recall button, loads the matrix routes from preset9. POWER SWITCH - Power switch for on/off control of matrixDL-HDM44A-H2 Quick Guide4Rear Panel View1. AC - AC power cord input2. HDMI IN (1-4) - HDMI input ports for connections to HDMI video sources3. HDMI IN (1-4) - HDMI output ports for connections to displays4. IR EXT. - 3.5mm IR input port for connection to IR extension cable5. EDID - EDID switch for EDID management6. FIRMWARE - USB port firmware updates7. LAN - RJ45 port for LAN connection to network or control system for telnet control8. RS232 - DB9 port for connection to control system for serial control9. AUDIO OUT - Audio de-embedded outputs for 1-4; phoenix for analog 2 channel audio and RCA for digital S/PDIF multichannelDL-HDM44A-H2 Quick Guide5Connectivity Instructions1. Verify all components included with the switcher are present before installation.2. If the switcher is going to be permanently mounted in a rack, attach the supplied rack ears to the sides of the DL-HDM44A-H2 matrix.Note: The matrix requires one rack unit (1 RU) of space. It is recommended that you leave an empty rack space above and below the DL-HDM44A-H2 for additional cooling.3. Turn off power and disconnect the audio/video equipment by following the manufacturer’s instructions.4. Connect the source devices to the HDMI inputs using HDMI cables that are less than or equal to 1.5 meters in length for 4k/60Hz signals. For source devices that are further away, it is highly recommended to install an extender such as the Digitalinx DL-HD70, DL-HDE100 or DL-HD2100.5. Connect the display devices to HDMI outputs using HDMI cables that are less than or equal to 1.5 meters in length for 4k/60Hz signals. For display devices that are further away, it is highly recommended to install an extender such as the Digitalinx DL-HD70, DL-HDE100 or DL-HD2100.6. If IR extension is required, connect the TRS 3.5 mm plug IR RX to the matrix IR EXT port, ensuring the IR receiver eye is placed in clear view of the handset used to control.7. Insert the matrix power supply included and switch on power located on the front panel. Check that the front panel LED screen is on to indicate the matrix is ready for use.8. Power on attached audio/video devices.9. Switch between sources and displays using the matrix front panel buttons, IR remote control, serial RS232, or LAN. To set a route using the front panel of the DL-HDM44A-H2, press the desired Input button (Source) and desired Output button (Display), then press Take.DL-HDM44A-H2 Quick Guide6Cabling Wiring RequirementsEthernet ControlThe DL-HDM44A-H2 may be controlled via Ethernet through a web browser interface.The TCP/IP port requires a standard straight-through Category 5 or greater cable with the TIA/EIA-568B crimp pattern for optimal operation.The default settings for the TCP/IP port are:IP address: 192.168.0.178TIA/EIA-568BOr n e/Wh te Or n e Green/Wh te Blue Blue/Wh te Green Brown/Wh te Brown P n 1P n 2P n 3P n 4P n 5P n 6P n 7P n 8Connect the Ethernet cable between to the matrix and a router with a straight-through cable or between the matrix and a computer with a crossover cable.RS232 ControlThe RS232 connection on the matrix is female DB9. User can use a USB to UART cable or a direct serial cable for matrix control. See below for control system configuration.• 9600 baud • 8 Data Bits • 1 Stop Bit •Parity = noneDL-HDM44A-H2 Quick Guide7Technical SpecificationsInput/Output Connections HDMI InputsFour (4) HDMI Type A Receptacle HDMI OutputsFour (4) HDMI Type A Receptacle IROne (1) 3.5mm TRS TCP/IPOne (1) 8P8C Port (Shielded RJ45 Female)RS232One (1) DB9 Port Female PowerOne (1) IEC C14Audio - Four (4) Analog L/R audio outputs, 3-Pin 3.5mm Phoenix connectors - Four (4) Digital S/PDIF audio outputs, RCA connectorsSupported Audio, Video, and Embedded Control Video Resolutions Up to 4K@60Hz 4:4:4 8 bit Color Depth: 1080p 48bit / 4K 24bitMaximum Passive HDMI Cable Distance 1.5m for 4k60 signalsVideo Compliance HDMI 2.0b and HDCP 2.2Embedded Audio Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master AudioDe-embedded Audio Analog L/R Out: PCM 2.0Digital RCA S/PDIF Out: Up to Dolby 5.1, DTS 5.1Device Control Parameters IR Carrier Frequency Range38kHz at 5 volts Ethernet100BaseT RS232 Baud Rate9600 baud Chassis and Environmental EnclosurePainted Aluminum Dimensions (H x W x D)43.5 mm x 440 mm x 300 mm (1.71 in x 17.32 in x 11.81 in) – 1 RU Shipping Weight4.22kg (9.30 lbs.)Operating Temperature0° to +45° C (+32° to +113° F) Operating Humidity10% to 90%, Non-condensing Storage Temperature-20° to +70° C ( -4° to +140° F)Storage Humidity10% to 90%, Non-condensing Power, ESD, and Regulatory Power Supply100V-240VAC / 50-60 Hz Power Consumption60W (Max.)ESD Protection8kV air, 4kV contact Product RegulatoryFCC, CE, RoHS Other Standard Warranty5 years Diagnostic IndicatorsSystem LCD Included Accessories Quick Install Guide, IR Remote, IR Receiver, Rack Mounting Ears with Screws, (1) AC power adapter with US, UK, EU and AU power plugsDistances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.Thank you for your purchase.For Technical Support please call our tollfree number at 800-530-8998 or email us at**********************Digitalinx is a brand of:11675 Ridgeline DriveColorado Springs, Colorado80921 USAPhone: 719-260-0061Fax: 719-260-0075Toll-Free: 800-530-8998。

HD74HC1G04中文资料

HD74HC1G04
Inverter
REJ03D0184–0500Z (Previous ADE-205-311C (Z))
Rev.5.00 Jan.27.2004
Description
The HD74HC1G04 is high-speed CMOS inverter using silicon gate CMOS process. With CMOS low power dissipation, it provides high-speed equivalent to LS–TTL series. The internal circuit of three stages construction with buffer provides wide noise margin and stable output.
Supply voltage range : 2 to 6 V Operating temperature range : –40 to +85°C • |IOH| = IOL = 2 mA (min) • Ordering Information
Part Name
Package Type
Package Code Package Abbreviation
Propagation delay time tPLH tPHL
2.0 — 48 100 — 4.5 — 12 20 — 6.0 — 9 17 —
125 ns Test circuit 25 21
Input capacitance
CIN
— — 2.5 5 —
5
pF
Equivalent capacitance CPD
—
10.0 µA VIN = VCC or GND

[整理]hd中文操作手册.

目录附录1 控制卡型录 (3)附录1.1控制卡选型 (3)附录1.2三代卡特色 (3)第一章概述 (3)1.1功能特点 (3)1.2运行环境 (4)第二章安装与卸载 (4)2.1安装 (4)2.2卸载 (5)第三章工具使用详解 (6)3.1软件主界面 (6)3.2标题栏 (6)3.3菜单栏 (6)3.3.1文件菜单 (6)3.3.2设置菜单 (7)3.3.3操作菜单 (9)3.3.4语言菜单: (9)3.3.5关于菜单: (10)3.4快捷方式栏 (10)3.5模拟显示屏 (11)3.6显示屏属性栏 (11)第四章显示屏节目创建流程 (12)4.1第一步：新建显示屏文件 (12)4.2第二步：新建节目 (14)4.3第三步：新建分区 (14)4.4第四步：节目制作完成 (15)第五章怎样显示不同内容 (16)5.1字幕显示 (16)5.2表格显示 (17)5.3图文显示 (18)5.4时间显示（万年历时间） (18)5.5表盘显示（模拟时钟） (19)5.5顺/倒时计显示 (20)5.6温度显示（需另购感应器） (21)第六章通信设置 (22)6.1串口线的做法 (22)6.2通信设置（串口） (23)6.3网线的做法 (24)6.4通信设置（网口） (25)6.4.1局域网单网络卡（HD－E3）通信 (25)6.4.2局域网多个网络卡（数个HD－E3）通信 (25)6.4.3局域网多个网络卡设置视频 (27)附录2 使用过程中的常用设置 (28)附录2.1控制卡如何远程升级 (28)附录2.2控制卡如何恢复出厂设置 (28)附录2.3控制卡如何测试显示屏 (29)附录2.4显示屏定时开关机 (30)附录2.5显示屏指定时间播放 (30)附录2.6字幕静止不动应该怎么设置 (30)附录1 控制卡型录附录1.1控制卡选型1:HD-S3-串口卡,控制范围32*1024(64个P10模组);2:HD-M3-串口卡,控制范围64*768/32*1536(96个P10模组);3:HD-Q3-Ｕ盘卡,控制范围64*768/32*1536(96个P10模组);4:HD-E3-网络卡,控制范围128*768/64*1536(192个P10模组);5:HD-U3-Ｕ盘卡,控制范围128*1280/64*2048(256个P10模组);6:HD-X3-Ｕ盘卡,控制范围256*1024/128*2048(512个P10模组);7:HD-G3-Ｕ盘卡,控制范围512*800/128*3072(800个P10模组);以上控制范围均为单色情况下，双色控制长度减半附录1.2三代卡特色采用全新高速32位MCU、扩大控制范围、性价比更高第一章概述1.1功能特点《HD2011》控制系统是2011年灰度科技有限公司应对条屏市场做出的较大的一次调整。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

0.4
0.1
0.2
0
Resistive or Inductive Load
0.01 0.2 0.4 0.6 0.8 1.0
Tj = 25°C Pulse Width = 300µs
0
40
80
120
160
1.2
1.4
1.6
TA, AMBIENT TEMPERATURE (°C) Fig. 1 Output Current Derating Curve
Typical Thermal Resistance, Junction to to +150
1. Mounted on Ceramic PC Board. 2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 V.
100
Tj = 25°C f = 1.0MHz
20
10
10
TA = 25°C Single Half Sine-Wave Pulse Width = 5.3ms (JEDEC Method)
0
1
1.0
10
1
10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per leg)
IFSM, PEAK FORWARD SURGE CURRENT (A)
35 30
Cj, JUNCTION CAPACITANCE (pF)
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element)
DS17003 Rev. F-2
2 of 2
HD01-HD06
MiniDIP
L
G
Dim A B C D E G H J K L
Min 5.43 3.6 0.15 0.05 ¾ 0.70 4.5 2.3 2.5 0.50
Max 5.75 4.0 0.35 0.20 7.0 1.10 4.9 2.7 2.7 0.80
A B
D E
Mechanical Data
· · · · · Case: MiniDIP, Molded Plastic Terminals: Plated Leads, Solderable per MIL-STD-202, Method 2026 Polarity: As Marked on Case Weight: 0.125 grams (approx.) Marking: Type Number
@ TA = 25°C unless otherwise specified
HD01 100 70
HD02 200 140 0.8 30 1.0 5.0 500 10 75
HD04 400 280
HD06 600 420
Unit V V A A V mA pF °C/W °C
Typical Junction Capacitance (per element) Operating and Storage Temperature Range Notes:
DS17003 Rev. F-2
1 of 2
HD01-HD06
元器件交易网
I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A)
0.6
IF, INSTANTANEOUS FORWARD CURRENT (A)
0.8
10
1.0
Ceramic PC Board
100
NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Peak Forward Surge Current (per leg)
IR, INSTANTANEOUS REVERSE CURRENT (µA)
100
10
Tj = 125°C
1.0
0.1
Tj = 25°C
0.01
J
H
C
K
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Current (Note 1) TA = @ 40°C Non-Repetitive Peak Forward Surge Current, 8.3 ms Single half-sine-wave Superimposed on Rated Load (JEDEC method) Instantaneous Voltage Drop @ 0.4A (per element) Peak Reverse Current at Rated DC Blocking Voltage (per element) @ TA = 25°C @ TA = 125°C (Note 2) Symbol VRMM VRWM VDC VRMS IO IFSM VF IR Cj RqJA Tj, TSTG
元器件交易网
HD01 - HD06
0.8A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features
· · · · · · · Glass Passivated Die Construction Low Forward Voltage Drop Surge Overload Rating to 30A Peak Ideally Suited for Automatic Assembly Miniature Package Saves Space on PC Boards Plastic Material: UL Flammability Classification Rating 94V-0 UL Listed Under Recognized Component Index, File Number E94661