Killtest 4A0-107
APK在线检测杀毒推荐网址
APK在线检测杀毒推荐⽹址具体操作步骤如下：
⼀、360⼿机app检测：
（⽀持批量在线检测安卓\塞班平台的应⽤，⽂件上限为60M）
⼆、腾讯⼿机管家：
（⽀持sisx\sis\apk\jar的程序包，⽂件最⼤不能超过100M）
三、安全管家查毒：
（除在线上传检测外，还⽀持软件下载链接的安全扫描检测）
四、⽹秦⼿机病毒检测：
（⽀持sisx、sis、apk、jar、cab格式的⼿机软件的病毒检测）
PS：以上地址均需要以上传软件程序包的⽅式进⾏在线病毒扫描，对于⼿机端还是建议⼤家安装专业的安全防护软件。
不过对于智能电视或⽹络机顶盒等设备还是建议⼤家在安装前检测⼀下，以防万⼀，供⼤家参考。
linux下杀死进程（kill）的N种方法
linux下杀死进程（kill）的N种⽅法⽤bash快速杀死进程我正在继续我的bash旅程！我说的是，即使很多也可以在其他⼯作，例如sh和zsh。
说实话，它可以被称为；我的shell旅程。
有时您想杀死⼀个进程⽽不运⾏ps aux，然后将其复制粘贴PID并最终⼀遍⼜⼀遍地杀死它……ps aux | grep puma-dev | awk'{print $2}' | tail -n 1 | xargs kill为什么会有那么多命令？ps aux # 显⽰所有正在运⾏的过程grep puma-dev # 选择其中带有⽂本“ puma-dev”的⾏awk'{print $2}' # 在第⼆列中选择值（即PID使⽤时的位置ps aux）tail -n 1 # 从底部选择⼀⾏，即最后⼀⾏xargs kill # 获取先前提取的值（最后⼀个PID）并将其杀死，例如：kill666如果要杀死所有找到的进程，请删除tail -n 1命令。
最佳化要跳过awk解析的笨拙（双关语意）命令PID，我们可以使⽤pgrep。
pgrep puma-dev | xargs kill我们甚⾄可以使⽤以下命令将命令简化为⼀个pkill：pkill puma-dev我通常结合使⽤这些命令，因为它们pkill不会给您太多有关所发⽣情况的反馈。
有时候我想看到⼀切ps aux。
有时我只是不在乎，或者我更想⼀次⼜⼀次地重复杀死同⼀程序。
⾸先，⽤ps查看进程，⽅法如下：$ ps -ef……smx 1822 1 0 11:38 ? 00:00:49 gnome-terminalsmx 1823 1822 0 11:38 ? 00:00:00 gnome-pty-helpersmx 1824 1822 0 11:38 pts/0 00:00:02 bashsmx 1827 1 4 11:38 ? 00:26:28 /usr/lib/firefox-3.6.18/firefox-binsmx 1857 1822 0 11:38 pts/1 00:00:00 bashsmx 1880 1619 0 11:38 ? 00:00:00 update-notifier……smx 11946 1824 0 21:41 pts/0 00:00:00 ps -ef或者：$ ps -aux……smx 1822 0.1 0.8 58484 18152 ? Sl 11:38 0:49 gnome-terminalsmx 1823 0.0 0.0 1988 712 ? S 11:38 0:00 gnome-pty-helpersmx 1824 0.0 0.1 6820 3776 pts/0 Ss 11:38 0:02 bashsmx 1827 4.3 5.8 398196 119568 ? Sl 11:38 26:13 /usr/lib/firefox-3.6.18/firefox-binsmx 1857 0.0 0.1 6688 3644 pts/1 Ss 11:38 0:00 bashsmx 1880 0.0 0.6 41536 12620 ? S 11:38 0:00 update-notifier……smx 11953 0.0 0.0 2716 1064 pts/0 R+ 21:42 0:00 ps -aux此时如果我想杀了⽕狐的进程就在终端输⼊：$ kill -s 9 1827其中-s 9 制定了传递给进程的信号是９，即强制、尽快终⽌进程。
Killtest 4A0-102
NZZV ]]] QORRZKYZ IT▲ Ҳ ԟ ԇThe safer , easier way to help you pass any IT exams.Exam : 4A0-102Title :Version : DEMOAlcatel-Lucent Border Gateway Protocol1.Which of the following are Link State protocols?A. BGPB. RIPC. OSPFD. IS-ISAnswer: C, D2.ECMP supports which of the following. Choose the best answer.A. 8 equal-cost paths per destination learned from any protocolB. 16 equal-cost paths per destination learned from any protocolC. 8 equal-cost paths per destination learned from the same protocol and preferenceD. 16 equal-cost paths per destination learned from the same protocol and preferenceE. 4 equal-cost paths per destinationAnswer: D3.Which of the following statements best describes the function of the RTM?A. From the router's route table, select the best routes to be installed in the FIB for forwardingdata.B. Based on the metrics of the routing protocol, chose the lowest cost route to be installed in theroute table.C. Apply the BGP route selection criteria to select the best route to be installed in the route table.D. Select the preferred route from the various routing protocols to be installed as the active routein the route table.E. Apply the assigned import and export policies to determine the routes to be advertised to therouter's neighbors.Answer: D4.What items are carried in a typical classless routing update? Select the best answer.A. Network address, mask and metricB. Network address and metricC. Prefix and maskD. prefix, next-hop and metricE. prefix and next-hopAnswer: A5.Choose the most accurate statement about the connections between eBGP peers.A. eBGP peers are usually directly connected to each other.B. eBGP peers are always directly connected to each other.C. eBGP peers are never directly connected to each other.D. eBGP peers are usually directly connected to each other, unless they are in the same autonomous system.E. eBGP peers are usually not directly connected to each other, additional configuration is required if they are.Answer: A6.What message is issued by a neighbor as a response to a valid Open?A. KeepaliveB. OpenC. ExchangeD. NotificationE. PingAnswer: A7.Which of the following is not exchanged in a BGP Open message?A. BGP version numberB. The local AS numberC. The hold timeD. The keepalive timerE. The Router IDAnswer: D8.The state of one BGP neighbor shows Established, which of the following is false?A. The router has established a complete session with that neighbor.B. BGP can exchange update, notification and keepalive messages with that neighborC. If the keepalive timer expires, the local system sends a keepalive message and restarts itskeepalive timerD. If the local system receives a notification message, it changes its state to OpenConfirmE. Established is the operational stateAnswer: D9.Which of the following is a Well Known Mandatory attribute?A. Origin CodeB. Local PreferenceC. MEDD. AS PathE. (a) and (d)F. (b) and (d)Answer: E10.Which of the following is true, based on the AS Path list shown here? 65206 65111 65100A. AS 65206 originated the routeB. AS 65111 is a transit ASC. AS 65100 is a transit ASD. AS 65100 originated the routeE. (b) and (d)F. (a) and (c)Answer: E。
施耐德电气低压配电产品选型指南说明书
ABB EntrelecSommaireBU0402061SNC 160 003 C0205SummarySelection guide ....................................................................................page 1Screw clamp ........................................................................................page 2Feed through and ground terminal blocks .......................................................page 2 - 5 to 10Single pole, multiclamp terminal blocks..........................................................................page 4Feed through terminal blocks - Double-deck................................................................page 11Feed through terminal blocks - Triple-deck...................................................................page 12Three level sensor, terminal blocks without ground connection...................................page 13Three level sensor, terminal blocks with ground connection ........................................page 14Terminal blocks for distribution boxes, double deck + protection .......................page 15 - 16Interruptible terminal blocks for neutral circuit......................................................page 17 - 18Distribution : phase, ground terminal blocks .......................................................page 19 to 21Single pole or four pole distribution blocks..........................................................page 22 to 24Heavy duty switch terminal blocks with blade......................................................page 25 - 26Heavy duty switch terminal blocks with push-turn knob..............................................page 26Heavy duty switch terminal blocks with contact control pull lever...............................page 29Heavy duty switch terminal blocks with blade - Double-deck .....................................page 27Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.)or 6.35x25.4 mm (1/4x1 in.) and 6.35x32 mm (1/4x11/4 in.) fuse s.........................................page 28 - 29Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.) fuses -Double-dec k.....................................................................................................................page 27Terminal blocks for test circuits with sliding bridge ......................................................page 30Terminal blocks for metering circuits.............................................................................page 31ESSAILEC terminal blocks.............................................................................................page 32Safety connection terminal blocks ................................................................................page 33Miniblocks for EN 50045 (DIN 46277/2) rail ..........................................................page 34 - 35Spring clamp ......................................................................................page 36Angled terminal blocks - Feed through and ground .....................................................page 36Feed through and ground terminal blocks ...........................................................page 37 to 41Feed through terminal blocks - Double deck ................................................................page 42Terminal blocks for sensors / actuators ........................................................................page 42Terminal blocks for distribution boxes...........................................................................page 43Switch terminal blocks for neutral conductor........................................................page 44 - 45Heavy duty switch terminal blocks with blade..............................................................page 46Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.) fuse s....page 47Miniblocks Spring clamp ......................................................................................page 48 to 52ADO - Screw clamp ...........................................................................page 53Feed through and ground terminal blocks ...........................................................page 53 to 56Feed through and ground terminal blocks - Double-deck............................................page 57Heavy duty switch terminal blocks with blade..............................................................page 58Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.) fuse s ......page 59 - 60Miniblocks ADO - Screw clamp............................................................................page 61 to 65ADO - ADO .........................................................................................page 66Feed through and ground terminal blocks ...........................................................page 66 to 69Feed through and ground terminal blocks - Double-deck............................................page 70Terminal blocks for sensors / actuators ........................................................................page 71Heavy duty switch terminal blocks with blade..............................................................page 72Fuse holder terminal blocks for 5x20 mm (.197x.787 in.) and 5x25 mm (.197x.984 in.) fuse s ......page 73 - 74Miniblocks ADO - ADO .........................................................................................page 75 to 79Accessories ADO ...........................................................................................................page 80Power terminal blocks .............................................................page 81 to 84Quick-connect terminal blocks .................................................page 85 - 86Terminal blocks for railway applications ................................page 87 to 97Pluggable terminal blocks .....................................................page 98 to 100Accessories......................................................................................page 101Marking..................................................................................page 102 to 104GrossAutomation(877)268-3700··*************************PR30PR3.Z2PR3.G2PR5PR4PR1.Z2Rated wire size :Rated wire size :Rated wire size :Rated wire size :Mounting railsShield terminals forcollector barMarking tableHorizontal Rated wire size :0.5 to 16 mm² (22 to 8 AWG)Rated wire size :Rated wire size :Rated wire size :P a g e t o 29e30 t o 32ag e e3P a ge 8 t o 60a g e6t o 6574P a ge 7 t o 79P a ge 9P a g P a gGrossAutomation(877)268-3700··*************************2ABB Entrelecd010830402051SNC 160 003 C0205MA 2,5/5 - 2.5 mm² blocks - 5 mm .200" spacingAccessoriesGrossAutomation(877)268-3700··*************************3ABB Entrelec D010740402051SNC 160 003 C0205M 4/6 - 4 mm² blocks - 6 mm .238" spacingAccessoriesGrossAutomation(877)268-3700··*************************4ABB EntrelecD011030402051SNC 160 003 C0205M 4/6.3A - 4 mm² blocks - 6 mm .238" spacingM 4/6.4A - 4 mm² blocks - 6 mm .238" spacingGrossAutomation(877)268-3700··*************************5ABB Entrelec D010840402051SNC 160 003 C0205M 6/8 - 6 mm² blocks - 8 mm .315" spacingAccessoriesGrossAutomation(877)268-3700··*************************6ABB EntrelecD010850402051SNC 160 003 C0205M 10/10 - 10 mm² blocks - 10 mm .394" spacingAccessoriesGrossAutomation(877)268-3700··*************************7ABB Entrelec D010860402051SNC 160 003 C0205M 16/12 - 16 mm² blocks - 12 mm .473" spacingAccessoriesGrossAutomation(877)268-3700··*************************8ABB EntrelecD010870402051SNC 160 003 C0205M 35/16 - 35 mm² blocks - 16 mm .630" spacingGrossAutomation(877)268-3700··*************************M 95/26 - 95 mm² blocks - 26 mm 1.02" spacingM 70/22.P - 70 mm² ground block with rail contact - 22 mm .630" spacingSelection35 mm / 1.37"12 mm / 0.47"14-30 Nm / 124-260 Ib.in 1.2-1.4 Nm / 10.6-12.3 Ib.in1000600600415400400577070240 mm 2500 MCM 500 MCM 10 mm 2 6 AWG 6 AWG IEC UL CSANFC DIN0.5 - 160.5 - 100 AWG-600 MCM 2 AWG-500 MCM 50 - 30035 - 24018-6 AWGD 150/31.D10 - 150 mm² blocks - 31 mm 1.22" spacingCharacteristicsD 240/36.D10 - 240 mm² blocks - 36 mm 1.41" spacingSelectionWire size main circuit mm² / AWG VoltageV Current main circuit A Current outputARated wire size main circuit mm² / AWG Rated wire size outputmm² / AWG Wire stripping length main circuit mm / inches Wire stripping length output mm / inches Recommended torque main circuit Nm / Ib.in Recommended torque outputNm / Ib.inSolid Stranded Solid Stranded Wire size output mm² / AWG9.5 mm / .37"0.5-0.8 Nm / 4.4-7.1 Ib.in5003003003220204 mm 212 AWG12 AWG0.2 - 422-12 AWG 22-12 AWG 0.22 - 4IEC ULCSANFC DINCharacteristicsWire size mm² / AWGSolid Stranded D 4/6.T3 - 4 mm² blocks - 6 mm .238" spacingSelectionVoltage V CurrentARated wire sizemm² / AWG Wire stripping length mm / inches Recommended torqueNm / Ib.inM 4/6.T3.P - 4 mm² block - 6 mm .238" spacingD 2,5/6.D - 2.5 mm² blocks - 6 mm .238" spacingD 2,5/6.DL - 2.5 mm² blocks - 6 mm .238" spacingD 2,5/6.DPA1 - 2.5 mm² blocks - 6 mm .238" spacingD 2,5/6.DPAL1 - 2.5 mm² blocks - 6 mm .238" spacingD 4/6... - 4 mm² blocks - 6 mm .238" spacingD 4/6.LNTP - 4 mm² closed blocks - 17.8 mm .700" spacingMA 2,5/5.NT- 2.5 mm² block - 5 mm .200" spacingAccessories**SFB2 : 16 to 35 mm² 6 to 2 AWG H= 3 mm/.12"M 10/10.NT- 10 mm² block - 10 mm .394" spacingAccessories(1) Except for M 35/16 NT (closed block)*SFB1 : 0.5 to 35 mm² 18 to 2 AWG H= 7 mm/.28"**SFB2 : 16 to 35 mm² 6 to 2 AWG H= 3 mm/.12"MB 4/6... - 4 mm² blocks - 6 mm .238" spacingMB 6/8... - 6 mm² blocks - 8 mm .315" spacingMB 10/10... - 10 mm² blocks - 10 mm .394" spacingBRU 125 A - 35 mm² block - 27 mm 1.063" spacingBRU 160 A - 70 mm² block - 35.2 mm 1.388" spacingBRU 250 A - 120 mm² blocks - 44.5 mm 1.752" spacingBRU 400 A - 185 mm² block - 44.5 mm 1.752" spacingAccessoriesAccessoriesBRT 80 A - 16 mm² block - 48 mm 1.89" spacingBRT 125 A - 35 mm² block - 48 mm 1.89" spacingBRT 160 A - 50 mm² block - 50 mm 1.97" spacing9.5 mm / .37"0.5-0.6 Nm / 4.4-5.3 Ib.in4003003002010104 mm 210 AWG 12 AWG 0.5 - 422-10 AWG20-12 AWG0.5 - 2.5IEC ULCSANFC DINMA 2,5/5.SNB - 2.5 mm² blocks - 5 mm .200" spacingCharacteristicsM 4/6.SNB - 4 mm² blocks - 6 mm .238" spacingSelectionWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping length mm / inches Recommended torqueNm / Ib.inSolid StrandedM 6/8.SNB - 6 mm² blocks - 8 mm .315" spacing - blade switchingSelectionAccessoriesM 4/8.D2.SF - for fuses 5x20 mm .197x.787 in. and 5x25 mm .197x.984 in. -4 mm² blocks - 8 mm .315" spacingM 4/6.D2.SNBT - 4 mm² blocks - 6 mm .238" spacing - blade switchM 4/8.SF- 4 mm² blocks - 8 mm .315" spacingM 4/8.SFL - 4 mm² blocks - 8 mm .315" spacing12 mm / .472"1.2-1.4 Nm / 10.6-12.3 Ib.in800(1)60060016252510 mm 210 AWG8 AWG0.5 - 1622-10 AWG 22-8 AWG 0.5 - 10IEC ULCSANFC DINCBD2SML 10/13.SF - for fuses 6.35x25.4 mm 1/4x1 in. and 6.35x32 mm 1/4x11/4 in. -10 mm² blocks - 13 mm .512" spacingSelectionAccessoriesCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping length mm / inches Recommended torqueNm / Ib.inSolid Stranded (1) Insulation voltage of terminal block - operating voltage : according to fuse.M 4/6.D2.2S2... - 4 mm² blocks - 6 mm .238" spacing11 mm / .43"0.8-1 Nm / 7.1-8.9 Ib.in50060030306 mm 28 AWG0.5 - 1022-8 AWG0.5 - 6IECULCSANFC DINM 6/8.ST... - 6 mm² blocks - 8 mm .315" spacingCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping length mm / inches Recommended torqueNm / Ib.inSolid Stranded M 6/8.STA - 6 mm² blocks - 8 mm .315" spacing(3)Only for M 6/8.STAM 4/6.ST- 4 mm² blocks - 6 mm .236" spacingBNT...PC...(2) Only for M10/10.ST-SnThe PREM IUM solution for testing the secondary circuits of current or voltage transformers.ESSAILEC, approved by the major electricity utilities, remains the premium choice for the energy market.Implemented in the transformers secondary circuits, ESSAILEC thanks to its intelligent “make before break” design eases and secures any intervention. Cutting the energy supply is avoided with zero risk for the operator.The plug and socket connection cuts cost installation as well as in-situ wiring errors. ESSAILEC is ideal for the wiring of sub-assemblies in the secondary circuits.ESSAILEC terminal blocksProtection relays,Protection relays,Testing :The ESSAILEC socket supplies energy to the protection or counting devices. The insertion of the test plug, which is connected to the measurement equipment, allows the testing of the devices, without perturbing the circuit.ESSAILEC blocks are well adapted to current or voltage measurement :-Current sockets with make before break contacts and pre-wired test plug for current measures-Voltage sockets with open contacts and pre-wired test plug for voltage measures-Up to 4 ammeters or 4 voltmeters connected to the test plugDistributing :The ESSAILEC plug is continuously mounted on the socket to supply current or voltage to secondary circuits sub assemblies.ESSAILEC blocks extreme versatility allow :-Safe current distribution with current socket with mobile contacts since the secondary circuit is not cut when plug is removed-Voltage or polarity distribution with dedicated voltage or polarity socket with closed contactESSAILEC is designed to offer :Great flexibility :-Connection multi contacts « plug and play »-Panel, rail, rack fixed mounting or stand-alone connector -Two wiring technologies, up to 10 mm²Extreme reliability :-Non symmetric blocks -Coding accessories -IP20 design -Locking system -Sealed coverR S T NFor technical characteristics and complete part numbers list, please ask for the ESSAILEC catalog10005006003225254 mm 21.65 mm²12 AWG 13 mm / .51"IECB.SCSANFC DINTS 50-180.5 - 0.8 Nm /4.4 - 7.1 Ib.in0.2 - 422-12 AWG0.22 - 40.5 - 1.50.28 - 1.6580050060041252562.512 AWG 13 mm / .51"0.8 - 1 Nm / 7.1 - 8.9 Ib.inIECB.S CSANFC DINTS 50-180.5 - 1020-12 AWG0.5 - 60.28 - 2.590050060046406510 mm 26 mm² 6 AWG 14 mm / .55"IECB.S UL/CSANFC DINTS 50-181.2 - 1.4 Nm / 10.6 - 12.3 Ib.in0.5 - 1620 - 6 AWG0.5 - 100.28 - 6M 4/6.RS - 4 mm² blocks - 6 mm .238" spacingCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping lengthmm / inches Recommended torque (screw)Nm / Ib.inSolid wire Stranded wire Solid wire Stranded wire Screw clampLugsM 6/8.RS - 6 mm² blocks - 8 mm .315" spacingCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping lengthmm / inches Recommended torque (screw)Nm / Ib.inSolid wire Stranded wire Solid wire Stranded wire Screw clampLugspending M 10/10.RS - 10 mm² blocks - 10 mm .394" spacingCharacteristicsWire size mm² / AWGVoltage V CurrentARated wire sizemm² / AWG Wire stripping lengthmm / inches Recommended torque (screw)Nm / Ib.inSolid wire Stranded wire Solid wire Stranded wire Screw clampLugspending SelectionAccessories(1) Only for block M 4/6.RS (4) For blocks M 4/6.RS and M 6/8.RS(2) Only for block M 6/8.RS(3) Only for block M 10/10.RSDR 1,5/4 - 1.5 mm² blocks - 4 mm .157" spacingDR 1,5/5... - 1.5 mm² blocks - 5 mm .200" spacing。
linux kill命令参数及用法详解
linux kill命令参数及用法详解功能说明：删除执行中的程序或工作。
语法：kill [-s <信息名称或编号>][程序]或kill [-l <信息编号>]补充说明：kill可将指定的信息送至程序。
预设的信息为SIGTERM(15)，可将指定程序终止。
若仍无法终止该程序，可使用SIGKILL(9)信息尝试强制删除程序。
程序或工作的编号可利用ps指令或jobs指令查看。
参数：-l <信息编号> 若不加<信息编号>选项，则-l参数会列出全部的信息名称。
-s <信息名称或编号> 指定要送出的信息。
[程序] [程序]可以是程序的PID或是PGID，也可以是工作编号。
kill命令可以从kill这个词来大致了解下它的作用，是的，它用来杀死(kill)一个进程。
下面是kill命令的详解。
1.作用kill命令用来中止一个进程。
2.格式kill [ －s signal | －p ] [ －a ] p id…kill －l [ signal ]3.参数－s：指定发送的信号。
－p：模拟发送信号。
－l：指定信号的名称列表。
pid：要中止进程的ID号。
Signal：表示信号。
4.说明进程是Linux系统中一个非常重要的概念。
Linux是一个多任务的操作系统，系统上经常同时运行着多个进程。
我们不关心这些进程究竟是如何分配的，或者是内核如何管理分配时间片的，所关心的是如何去控制这些进程，让它们能够很好地为用户服务。
Linux 操作系统包括三种不同类型的进程，每种进程都有自己的特点和属性。
交互进程是由一个Shell启动的进程。
交互进程既可以在前台运行，也可以在后台运行。
批处理进程和终端没有联系，是一个进程序列。
监控进程(也称系统守护进程)是Linux系统启动时启动的进程，并在后台运行。
例如，httpd是著名的Apache服务器的监控进程。
kill 命令的工作原理是，向Linux系统的内核发送一个系统操作信号和某个程序的进程标识号，然后系统内核就可以对进程标识号指定的进程进行操作。
如何杀死僵尸进程？
如何杀死僵⼫进程？
僵⼫进程定义？
查看僵⼫进程，利⽤命令ps，可以看到有标记为Z(zombie)的进程就是僵⼫进程。
僵⼫进程的危害？
僵⼫进程会占⽤系统资源，如果很多，则会严重影响服务器的性能；
僵⼫进程产⽣的原因?
⼦进程结束后向⽗进程发出SIGCHLD信号，⽗进程默认忽略了它
⽗进程没有调⽤wait()或waitpid()函数来等待⼦进程的结束
⽹络原因有时会引起僵⼫进程；
如何杀死僵⼫进程？
僵⼫进程⽤kill命令是⽆法杀掉的，但是我们可以结果掉僵⼫进程的爸爸，僵⼫daddy挂了之后，僵⼫进程就成了孤⼉进程，孤⼉进程不会占⽤系统资源，会被init程序收养，然后init程序将其回收。
ps -A -o stat,ppid,pid,cmd |grep -e "^[Zz]" //先查看具体进程：
kill -9 pid号 //杀死z进程（这些动作是⽐较危险的，希望在真正的服务器上⾯慎⽤）
1.查看所有R相关的进程
2.查看僵⼫进程的⽗进程
3.杀死僵⼫进程对应的⽗进程
4.僵⼫进程被回收
参考：
1.
2.
3.
4.。
Killtest 分享PK0-003 题库
NZZV ]]] QORRZKYZ IT▲ Ҳ ԟ ԇThe safer , easier way to help you pass any IT exams. Exam: PK0-003Project+ (2009)Title:Version: Demo1.You are the project manager for your organization and are coaching Sam on the differences between a project and operations. Which one of the following is the best definition of a project?A. A project is a short-term endeavor to create a unique product or service.B. A project moves through five phases:initiating, planning, executing, monitoring and controlling, and closing.C. A project creates a unique product or service for the organization's customers.D. A project provides a service to the organization.Answer: A2.Which of the following processes involves monitoring the progress of the project to identify any variances in the project plan?A. ClosingB. ControllingC. ExecutingD. PlanningAnswer: B3.You are the project manager for the HNG Project. Your project is slated to last eight months but management has asked that you create a method for reducing the project duration. You elect to allow certain phases of the project to overlap. What schedule compression technique have you used in this instance?A. CrashingB. Lag timeC. Resource levelingD. Fast trackingAnswer: D4.You are a project manager for GTX project. The project has ten active stakeholders. How many communication channels will be required for effective communication with the stakeholders?A. 45B. 2C. 10D. 9Answer: A5.You are the project manager of manufacturing process. Your project will focus on the creation of 987,600 handheld printers to be used in grocery stores around the world. The printers are manufactured largely by machine though there are several steps in the process where project team members will need to manually configure the devices. Management will be completing statistical sampling of the printers and they have established an upper control limit of 980 correct out of 1,000 and a lower control limit of 970 out of 1,000. Your expected mean is 975. On a control chart, which is what management expects you to create, what is called should your results exceed 980 correct out of a 1,000 in any given measurements?A. Out of controlB. Failure modeC. ImprovementD. VarianceAnswer: A6.Which of the following is the last deliverable at the close out meeting?A. Customer FeedbackB. Project approvalC. Lessons LearnedD. Source code of applicationAnswer: C7.You are the project manager of the NGQ Project and are reviewing the assignments for yourproject team. You have decided to use a RACI chart as your responsibility assignment matrix.What does RACI mean?A. Responsible, Active, Confirmed, InactiveB. Resource, Action, Communicate, InformC. Responsible, Accountable, Communicate, InformD. Responsible, Accountable, Consult, InformAnswer: D8.You are the project manager of the NHH Project and you have 22 project team members on the project. You need to identify a method to promote performance on your project and are examining Herzberg's Theory of Motivation. What will happen in this theory to your project team's motivationif you can remove the hygiene agents according to Herzberg's Theory?A. The motivation of the team will excel once the hygiene agents are removed.B. The motivation of the team will excel - if they're interested in the project's goals.C. There will be no change in the team's motivation.D. The motivation of the team will decrease.Answer: D9.Which of the following process groups of the project management processes utilizes the mostproject time and resource?A. PlanningB. InitiationC. ClosingD. ExecutingE. ControllingAnswer: D10.A construction company is about to start a new project. It requires hiring a project manager for this project. Which of the following are the most important skills that a person must have to be selected as a project manager?A. Team building and human resourcesC. Problem solvingD. Negotiation and influentialE. CommunicationAnswer: E11.Samantha is the project manager of the KWK Project and she has completed the project deliverables. She needs the project customers to inspect the project work to gain their formal acceptance of what she and her project team have created. What process does Samantha need to initiate?A. Verify scopeB. Perform quality controlC. Project closureD. Scope validationAnswer: A12.You are the project manager in a matrix structure. Your project team comes from all over the organization and many of your project team members report to several project managers besides you. There are total 89 project team members on your project that you need to communicate with and you'll need to communicate with the other project managers and functional managers for each resource on the project team. What type of a chart can you create to help track the reporting relationships of all your project team members in this matrix structure?A. Project Organization ChartB. Resource Assignment MatrixC. Communications matrixD. Role and responsibility matrixAnswer: A13.Brent is the project manager of the NYE Project and he has just completed the first phase of the project. Before the project may move forward the project customer must inspect the project workto determine completeness of the work so far. This activity is part of the closing the project phase. What process will Brent and the project stakeholders do at the end of each project phase?A. Phase gate reviewB. Inspection of key resultsC. Quality controlD. Verify scopeAnswer: D14.You have been hired as a contract project manager for Tech Perfect Inc. The project has already been started. Sufficient details of the project have already been structured. You are working withyour team for cost estimation of the project. Which of the following estimating techniques will youuse for the highest degree of accuracy?A. Parametric modelingB. AnalogousD. Top-downAnswer: C15.You are the project manager for the NHQ Project and are working with Patty, a junior project manager on the project. Patty is curious about the project's critical path and the concept of float. Patty doesn't understand what the critical path is. Which one of the following statements best describes the critical path?A. It's the path that contains the riskiest project activities.B. It's the path in the project network diagram with the most important activities.C. It's the path in the project network diagram that reveals the earliest date the project can be completed.D. It's always the one path with the least amount of float.Answer: C16.You are the project manager of the BGY Project. A new issue has been identified in the project and this issue could prove to be costly for the project. The issue affects Anna's project deliverable and she is a negative stakeholder for the project. Considering these elements of the project, what type of communication would be the most effective to share this news with Anna?A. Documented review of the issueB. Face-to-face meetingC. Informal presentation meetingD. Immediate telephone callAnswer: B17.You are the project manager of the NGH Project and are predicting the costs for your project work. You have determined that an activity in your project has the following cost attributes assigned to it: Optimistic - $3,500; Most Likely - $7,500; Pessimistic - $12,500.What is the amount that you'll record for the project's cost in the cost management plan and estimate?A. $7666B. $12500C. $3500, $7500, $12500D. $7500Answer: A18.Which of the following types of floats are available? Each correct answer represents a complete solution. Choose two.A. Half floatB. Free floatC. Full floatD. Total floatAnswer: B,D19.In what organizational structure is the project manager often referred to as a project coordinator or expeditor?A. Weak matrixB. Balanced matrixC. ProjectizedD. Strong matrixAnswer: A20.You are the project manager of the NHQ Project for your organization. You are working on creating the project management plan for the NHQ Project and need to identify the costs of the resources needed in the project. All of the following are examples of resources except for which one?A. Network cableB. SoftwareC. Staffing management planD. Electrical engineerAnswer: C21.Which of the following is responsible to sign off on the closure documents of a project?A. End userB. Project team membersC. SponsorD. Project ManagerAnswer: C22.Ned is the project manager for a new project. Ned is determining what project team members should be recruited in the project that will likely last for eight months. All of the following are enterprise environmental factors that should be considered when acquiring project team members except for which one?A. Interest in working on the projectB. Cost to use the resourceC. Duration as an employeeD. Availability to work on the projectAnswer: C23.Jane is a project manager that is working with her project team. Some of the project stakeholders have been circumventing the change control process and approaching the project team members directly. Jane wants to inform the project team that stakeholders should use the approved change control form. What is it called when the project team members completed unapproved change requests for stakeholders?A. Scope creepB. Gold platingC. Cost of qualityD. Integrated change controlAnswer: A24.Julie is the project manager of the JUUY Project, which will create photography scanners for sale around the world. Her project team is tracking categories of failure for detailed analysis. Management has required in the project quality management plan that all defects be shown in a histogram for detailed evaluation. What type of a chart is management requesting?A. Process flowchartB. Cause-and-effect chartC. Pareto chartD. Control chartAnswer: C25.Violet is the project manager for her organization and she is working with Teddy on the quality control processes for their project. Teddy is confused on the difference between prevention and inspection when it comes to quality and customer acceptance of the project deliverables. Which statement best defines quality and customer acceptanceA. Prevention keeps errors out of the process. Inspection keeps errors out of the hands of the customer.B. Prevention and inspection work together to keep mistakes out of the customer's hands.C. Prevention is a management-driven process and inspection is a project team-driven process.D. Prevention is keeping errors out of the customer hands. Inspection keeps errors out of the project26.What theory of human resources states that people are driven primarily by one of three needs?A. McClelland's Theory of NeedsB. Ouchi's Theory ZC. Hertzberg's Theory of MotivationD. Maslow's Hierarchy of NeedsAnswer: A27.The cost variance (CV) value of a project is less than zero or negative. What does this value indicate?A. Costs are according to the budget.B. The budget for the project is insufficient.C. Costs are higher than originally planned for the project.D. Costs are less than budgeted.Answer: C28.You are the project manager of a high-priority project that will require the project team to work on the project for 18 months. The project cannot be late or the organization will face sizeable fines. You need a method to ensure that the project team will work towards the project with little defects and much accuracy to reach the project deadline.Which one of the following are methods for ensuring project team work accuracy in the project execution?A. Risk management meetingsB. Recognition and rewardsC. Management by walking aroundD. Coercive powerAnswer: B29.You are a project manager in a matrix environment. You and another project manager are in conflict over a particular resource that you both need on your project. Who has the authority in this environment to determine where and how the resource will be utilized in the projects?A. The functional management of the organizationB. The project manager whose project started firstC. The project team resourceD. The project manager with the most experienceAnswer: A30.Holly is the project manager for her organization. Two of her resources are in a heated argument over which database server the project should use. Holly interjects to calm down the scenario.She reminds them that they're on the same team, both have good points, and that the database will be selected in the project planning. The team members agree and move on with the project planning. What type of conflict resolution has Holly done in this instance?A. SmoothingB. AvoidingC. CompromisingD. ForcingAnswer: A。
Killtest 分享3X0-103 题库
NZZV ]]] QORRZKYZ IT▲ Ҳ ԟ ԇThe safer , easier way to help you pass any IT exams. Exam: 3X0-103Linux Networking (Level 1) Title:Version: DEMO1.You wish to communicate with hosts on your wide-area network. Which of the following is the exact sequence of commands used to manually configure an Ethernet interface, assuming driver modules are not loaded?A. lsmod, insmod, ifconfigB. insmod, ifconfig, routeC. lsmod, rmmod, insmod, ifconfigD. ifconfig, routeAnswer: B2.Which of the following are TRUE about buffer size? (Choose two.)A. A large buffer can lead to wasted system memory.B. A small buffer can lead to slower data transfer lines.C. Having a small buffer will free system memory, allocating fewer registers.D. The larger the buffer, the faster the transfer rate, reducing time arrival jitter.Answer: AB3.Which of the following is TRUE concerning the Address Resolution Protocol (ARP)?A. It binds a physical address to a broadcast address.B. It binds a MAC (Media Access Control) address to a logical address.C. It binds a logical address to an IP address.D. It binds a MAC (Media Access Control) address to a physical address.Answer: B4.Which of the following can tunneling be used for?A. It can connect two IPX networks separated by some different network.B. It can connect two IPv4 networks separated by some different network.C. It can provide mobile IP support and amateur radio support.D. It can connect two IPv6 networks separated by some different network.E. All of the above.Answer: E5.Which of the following commands will allow you to view the ARP table when the configured name server is not functioning? (Choose the best answer.)A. arp -vB. arp -aC. arp -nD. arp -sAnswer: C6.Which of the following can you do with the "ping" command? (Choose two.)A. Determine if a remote host can be contacted.B. Create and modify (n)x-u NIS network maps.C. View the MAC address of a given host.D. Display the route along which an IP packet travels.Answer: AD7.A default policy of DENY and ACCEPT may be implemented for a system's ipchains. Which of the following options will change the default input policy to DENY?A. ipchains -a input DENYB. ipchains -a output DENYC. ipchains -P input DENYD. ipchains -all input DENYE. ipchains -input DENYAnswer: C8.inetd is responsible for waiting for new network requests and authenticating users based on the contents of the "inetd.conf" file.A. TRUEB. FALSEAnswer: B9.Telnet was developed as a continuation of what other communications program developed for ARPANET? (Select the best answer.)A. rpcB. teleC. loginD. ftpE. muttF. None of the aboveAnswer: D10.Which path accurately depicts a three-way handshake between Network X and Network Y for establishing a TCP connection? (Select the best answer.)A. X sends SYN to Y; Y sends SYN to X; X sends ACK to YB. X sends SYN to Y; Y sends two SYNs to X; X sends ACK to YC. X sends ACK to Y; Y sends SYN to X ; X sends ACK to YD. X sends SYN to Y; Y sends ACK to X ; X sends ACK to YE. X sends ACK to Y; Y sends SYN and ACK to X; X sends ACK to YAnswer: D11.Which of the following is FALSE concerning TCP, IP, and UDP? (Select the best answer.)A. Transport Control Protocol (TCP) supports unicast addressing.B. User Datagram Protocol (UDP) supports unicast addressing.C. TCP supports multicasting.D. UDP supports multicasting.E. Internet Protocol (IP) supports multicasting.Answer: C12.Typical implementations of ping use the _____ to send echo requests to other hosts.A. Internet Protocol (IP)B. Internet Control Message Protocol (ICMP)C. User Datagram Protocol (UDP)D. Transport Control Protocol (TCP)Answer: B13.Because of flow control, UDP will generally lead to network congestion, while TCP helps prevent congestion.A. TrueB. FalseAnswer: A14.Assume that a software company has a subnet address 192.168.1.0/255.255.255.0. How many possible hosts can this subnet support, and what is the network address for the subnet?A. 64; 192.168.1.255B. 254; 192.168.1.0C. 255; 192.168.1.0D. 256; 192.168.1.255E. 128; 192.168.1.1Answer: B15.If a machine has an IP address of 192.168.1.61 and the netmask is 255.255.255.0, what is its subnet address?A. 192.0.0.0B. 192.168.0.0C. 192.168.1.0D. 0.0.0.61Answer: CThe safer , easier way to help you pass any IT exams.16.Which of the following subnet masks is usually associated with a Class A IP address?A. 255.255.0.0B. 255.255.255.0C. 255.0.0.0D. 255.255.255.255Answer: C17.Which of the following host IP addresses are on networks normally reserved for intranets? (Choose three.)A. 10.1.220.1B. 12.1.2.4C. 172.16.0.30D. 192.168.0.18E. 187.10.30.200Answer: ACD18.For a Class C network, which of the following denotes a valid host address on the 192.168.3.0 network?A. 192.168.3.255B. 192.168.3.1C. 192.168.3.0D. 192.168.3.256Answer: B19.Which of the following statements is TRUE about the subnet mask?A. Another name for the subnet mask is the subnet address.B. In the subnet mask, zeros represent the host ID and ones represent the network ID.C. In the subnet mask, ones represent the host ID and zeros represent the network ID.D. The subnet mask is used to aid in name resolution for root name servers.Answer: B20.Which Resource Record allows the redirecting of mail to another host, assuming the correct accounts exist?A. TXTB. PTRC. SOAD. MAILE. MXAnswer: EThe safer , easier way to help you pass any IT exams.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
NZZV ]]] QORRZKYZ IT
▲ Ҳ ԟ ԇ
The safer , easier way to help you pass any IT exams.
Exam : 4A0-107
Title :
Version : DEMO
Alcatel-Lucent Quality of Service
1. True of False: A proper end-to-end QoS solution is becoming more of an issue even as more bandwidth is being made available to today's bandwidth-intensive, interactive multimedia applications.
A. True
B. False
Answer: A
2. Which of the following are examples of metrics for QoS?
A. delay, jitter, packet loss
B. latency, FIFO, WRED
C. signal degradation, attenuation, line loss
D. SNR, radial CODEC inversion, latency
E. Inverse Queue Depletion, delay, packet loss
Answer: A
3. Which of the following are Ethernet SAP encapsulation types? Choose all that apply.
A. Null
B. Dot1Q
C. Q-in-Q
D. IPCP
E. BCP-Null
F. BCPdot1.q
G. Frame Relay
Answer: ABC
4. Which of the following are not considered a differentiator/classifier of customer traffic at layer 2 or 3 of the OSI model? Choose all that apply.
A. DSCP
B. 802.1p
C. IP Precedence
D. TCP/UDP Port numbers
E. HTML version
Answer: DE
5. Which of the following statements are true regarding the DSCP bits? Choose 3 answers.
A. The precedence level bits define 4 Assured Forwarding Classes
B. The three least significant bits of the DSCP bits specify the drop probability
C. The 8 bits of the TOS field are used for DSCP
D. To convert DSCP to IP Precedence the three most significant bits are matched
E. DSCP provides for 64 precedence levels with 3 drop probabilities
Answer: ABD
6. Pick from the following list the 3 major components of the QoS features on the Alcatel-Lucent 7750 SR.
A. virtual inflow classification
B. real-time QoS shaping
C. traffic classification
D. 802.1q p-bit rate-limiting
E. buffer memory management
F. traffic scheduling
Answer: CEF
7. The IOM is responsible for which of the tasks listed below? Choose 3 answers.
A. local processing of critical control plane functions
B. IPSec VPN hardware accelerated encryption
C. queuing, scheduling, and buffer management
D. IP/MPLS/MAC forwarding lookup
E. Layer 2 / Layer 3 encapsulation
Answer: CDE
8. Which of the following statement is true with regards to Q-in-Q on the Alcatel-Lucent 7750 SR?
A. Q-in-Q defines a mechanism for encapsulating queued DSCP traffic at the provider edge
B. Q-in-Q is a new protocol that supercedes 802.1p priority-bit mapping in a QoS-aware network
C. The use of either the inner or outer 802.1p bits in the 802.1q frames for QoS classification can be configured on the Alcatel-Lucent 7750 SR
D. Q-in-Q is a protocol which re-encapsulates trunked p-bits in an outer label that is mapped into the EXP bits in an MPLS backbone
E. none of the above
Answer: C
9. Which of the following are not categories of forwarding classes on the Alcatel-Lucent 7750 SR? Choose 3 answers.
A. Real-time
B. Assured
C. Non-conforming
D. High Priority
E. Expedited
Answer: ACE
10. Which of the following are Trusted boundaries by default? Choose 2 answers.
A. An IES SAP
B. A VPLS SAP
C. A network port
D. A VPRN SAP
E. An access port
Answer: CD。