110-91-318-41-605中文资料
1123343-1中文资料
1123343-1 Product DetailsHome | Customer Support | Suppliers | Site Map | Privacy Policy | Browser Support© 2008 Tyco Electronics Corporation All Rights Reserved SearchProducts Documentation Resources My Account Customer Support Home > Products > By Type > Product Feature Selector > Product Details1123343-1Active MULTILOCK Connectors and ContactsAlways EU RoHS/ELV Compliant (Statement of Compliance)Product Highlights:?Contact?Terminate To Wire?Receptacle?Wire Range = 0.20-0.60²[24-20] mm[AWG]?Insulation Diameter = .95 -1.70 mmView all Features | Find SimilarProductsCheck Pricing &AvailabilitySearch for ToolingProduct FeatureSelectorContact Us AboutThis ProductQuick LinksDocumentation & Additional InformationDocuments are temporarily unavailable. We are working hard to correct the problem. Please try again later.Additional Information:?Product Line InformationRelated Products:?ToolingProduct Features (Please use the Product Drawing for all design activity)Product Type Features:?Product Type = Contact?Tab/Receptacle = Receptacle?Insulation Diameter (mm [in]) = 0.95 – 1.70[0.037 –0.067]?Proprietary Name = MULTILOCK?Product Series = .025 SeriesBody Related Features:?Wire Range (mm [AWG]) = 0.20-0.60²[24-20] Contact Related Features:?Contact Material = Copper Alloy?Contact Mating Area Plating Material = Pre-Tin Industry Standards:?RoHS/ELV Compliance = RoHS compliant, ELVcompliant?Lead Free Solder Processes = Wave soldercapable to 240°C?RoHS/ELV Compliance History = Always wasRoHS compliantConditions for Usage:?Terminate To = WirePackaging Related Features:?Packaging Method = StripOther:?Brand = AMPProvide Website Feedback | Contact Customer Support。
吗啉110-91-8
14.4 包裹组
欧洲陆运危规 : I
国际海运危规 : I
国际空运危规 : I
14.5 环境危害
欧洲陆运危规 :否
国际海运危规 海运污染物 :否 国际空运危规 : 否
14.6 对使用者的特别预防
无数据资料
15 法规信息
15.1 专门对此物质或混合物的安全，健康和环境的规章 / 法规
https:// 3/5
化学品安全技术说明书
对人类致癌 (Morpholine) 生殖毒性 无数据资料 特异性靶器官系统毒性（一次接触） 无数据资料 特异性靶器官系统毒性（反复接触） 无数据资料 潜在的健康影响
吸入 吸入可能有害。 该物质对组织、粘膜和上呼吸道破坏力强 吞咽 误吞对人体有害。 引致灼伤 皮肤 如果被皮肤吸收会有毒性 引起皮肤灼伤。 眼睛 引起眼睛灼伤。 接触后的征兆和症状 该物质对粘膜组织和上呼吸道、眼睛和皮肤破坏巨大。, 咳嗽, 呼吸短促, 头痛, 恶心 附加说明 化学物质毒性作用登记: QD6475000
14 运输信息
14.1 UN编号
欧洲陆运危规 : MORPHOLINE 国际海运危规 : MORPHOLINE 国际空运危规 : MORPHOLINE
14.2 联合国（UN）规定的名称
欧洲陆运危规:2054 国际海运危规:2054 国际空运危规:2054
14.3 运输危险类别
欧洲陆运危规 : 8 (3) 国际海运危规 : 8 (3) 国际空运危规 : 8 (3)
4.2 最重要的症状和影响，急性的和滞后的
禁止催吐。切勿给失去知觉者通过口喂任何东西。用水漱口。请教医生。
1/5
化学品安全技术说明书
4.3 及时的医疗处理和所需的特殊处理的说明和指示
超越号950胶水盐过液安全数据表说明书
SAFETY DATA SHEETSUPERIOR No. 950DATE REVISED: January 3, 2019SECTION 1 -- IDENTIFICATIONProduct Name/Part number: Superior No. 950Recommended use: Rosin Flux PasteManufacturer:Superior Flux & Mfg. Co. Emergency Contact: CHEMTREC 6615 Parkland Blvd Emergency Phone: 1-800-424-9300Cleveland OH, 44139For other info: (440) 349-3000 SECTION 2 – HAZARD(S) IDENTIFICATIONClassification of the substance or mixtureGHS Classification in accordance with OSHA HCS (29 CFR 1910)Acute toxicity, Oral (Category 4) H302Skin irritation (Category 2) H315Skin sensitization (Category 1) H317Serious eye damage (Category 1) H318Specific target organ toxicity – Single exposure, Respiratory system(Category 3) H335Specific target organ toxicity – Repeated exposure, Inhalation, Lungs(Category 1) H372Specific target organ toxicity – Repeated exposure, Oral, Kidney(Category 2) H373Acute aquatic toxicity (Category 3) H402See below for full text of H-StatementGHS Label Elements, including precautionary statementsPictogram(s):Signal Word: DangerHazard Statement(s)**H302 Harmful if swallowedH315 Causes skin irritationH317 May cause an allergic skin reactionH318 Causes serious eye damageH335 May cause damage to respiratory systemH372 Causes damage to lungs through prolonged or repeated exposure if inhaled.H373 May cause damage to kidney through prolonged or repeated exposure if swallowed.H402 Harmful to aquatic life.**May be omitted from label due to presence of stronger/stricter statement.Precautionary statement(s)P260 Do not breathe dust, fumes, mist, vapours, or spray.P264 Wash skin thoroughly after handling.P270 Do not eat, drink or smoke when using this product.P271 Use only outdoors or in a well-ventilated area.P272 Contaminated work clothing should not be allowed out of the workplace.P280 Wear protective gloves and eye protection.P301+P312+P330 IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell.Rinse mouth.P302+P352 IF ON SKIN: Wash with plenty of soap and water.P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a positioncomfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Removecontact lenses, if present and easy to do. Continue rinsing.P312 Call a POISON CENTER or doctor if you feel unwell.P332+P313 If skin irritation occurs: Get medical advice.P337+P313 If eye irritation persists: Get medical attention.P362 Take off contaminated clothing and wash before reuse.P403+P233 Store in a well-ventilated place. Keep container tightly closed.P405 Store locked up.P501 Dispose of contents to an approved waste disposal plantHazards not otherwise classified or not covered by GHS: NoneSECTION 3 – COMPOSITION INFORMATIONComponents CAS Number %Rosin 8050-09-7 20-50Benzoic acid 65-85-0 5-10 Dimethylamine hydrochloride 506-59-2 <5Ethylene glycol 107-21-1 <5Unlisted percentages are non-hazardous stabilizers, and water.SECTION 4 – FIRST AID MEASURESDescription of first aid measuresGeneral advice: Consult a physician. Show this safety data sheet to the doctor in attendance. Move out of dangerous area.Inhalation: If breathed in, move to fresh air. If not breathing, give artificial respiration.Consult a physician.Eyes:Rinse thoroughly with plenty of water for at least 15 minutes.Skin:Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician.Ingestion:Rinse mouth with water. Never give anything by mouth to an unconscious person.Rinse mouth with water. Consult a physician immediately.Most Important Symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in section 2 (labeling)Medical Conditions Generally Aggravated by Exposure: Any weakness of the lungs, kidneys or liver will be aggravated.SECTION 5 – FIREFIGHTING MEASURESSuitable Extinguishing Media: Use dry chemical, carbon dioxide foamSpecial Hazards: No data availableSpecial protective actions for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.SECTION 6 - ACCIDENTAL RELEASE MEASURESPersonal Precautions and Equipment and emergency procedures: Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. See section 8 for personalprotection.Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains.In Case Material is spilled:Contain spillage, then collect by wet-brushing and place in container for disposal according to local regulations.SECTION 7 - HANDLING AND STORAGEPrecautions for safe handling: Avoid contact with skin and eyes. Provide adequate and appropriate ventilation for fumes when using this product.General Precautions: Do not eat, drink, or smoke while using this product. Wash hands after use. Remove contaminated clothing and protective equipment before entering eating areas.For full precaution statements see Section 2Storage Requirements: Keep container tightly closed in a dry and well-ventilated place.Containers which are opened must be carefully resealed and kept upright to preventleakage.SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION CONTROL PARAMETERSOSHA Permissible Exposure Limit (PEL): 1 mg/m3ACGIH Threshold Limit Value (TLV): 1 mg/m3Engineering Controls: Use local exhaust ventilation to maintain air concentrations of vapors and fumes below occupational exposure standards.Special Engineering Control Needs: No data availableRespiratory Protection: For nuisance exposures use type P95 (US) respirator. For higher level protection use type OV/AG/P99 respirator cartridges as a backup to engineering controls.If the respirator is the sole means of protection, use a full-face respirator. Use respirators and components tested an approved under appropriate government standards such asNIOSH (USA) or CEN (EU).Protective Gloves: Handle with gloves. (Nitrile Rubber recommended) Gloves must be inspected prior to use. Use proper glove removal techniques (without touching glove’souter surface) to avoid skin contact with this product. Dispose of contaminated glovesafter use in accordance with applicable laws and good lab practices. Wash and dry hands after handling.Eye Protection: Use tightly fitting safety goggles. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (USA) or EN 166(EU)Body Protection: Complete suit protecting against chemical, flame retardant protective clothing recommended. The type of protective equipment must be selected according to theconcentration and amount of the dangerous substance at the specific workplaceIf used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.SECTION 9 - PHYSICAL AND CHEMICAL CHARACTERISTICS Appearance Amber pasteOdor MildOdor threshold No data availablepH Not applicableMelting point/Freezing point 49°C/120°FInitial boiling point and boiling range No data availableFlash point No data availableEvaporation rate Not applicableFlammability (Solid, gas) No data availableUpper flammability or explosive limits Upper explosion limit: No data available Lower flammability or explosive limits Lower explosion limit: No data available Vapor pressure No data availableVapor density No data availableRelative density 1.20 (Water = 1)Solubility(ies) MinimalPartition coefficient: n-octanol/water No data availableAuto-ignition temperature No data availableDecomposition temperature No data availableViscosity No data availableSECTION 10 - STABILITY AND REACTIVITYReactivity: No data availableStability: Product is stable under recommended storage conditionsPossibility of hazardous reactions: No data availableConditions to Avoid: Excessive heatIncompatibility: No data availableHazardous Decomposition Products Hydrogen chloride gas, carbon monoxide, carbon dioxide (Under fire conditions)In the event of fire: See Section 5SECTION 11 - TOXICOLOGICAL INFORMATIONLikely Route(s) of Exposure: Inhalation, ingestion, skin and eye contactSymptoms (Immediate and Chronic) fromAcute Exposure No data availableProlonged or Repeated Exposure No data availableMeasure(s) of toxicityNo data availableIARC:No component of this product is present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. NTP:No component of this product is present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.OSHA:No component of this product is present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHASECTION 12 - ECOLOGICAL INFORMATIONToxicityNo data availablePersistence and degradabilityNo data availableBioaccumulative potential No data availableMobility in soil No data availableOther adverse effectsNo data availableSECTION 13 - DISPOSAL CONSIDERATIONSWaste treatment methodsProduct Offer surplus and non-recyclable solutions to a licensed disposal company.Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging Dispose of as unused product.SECTION 14- TRANSPORTATIOND.O.T. (USA)Proper Shipping Name: Non-hazardousIdentification Number: N/A Hazard Class(es): N/APacking Group: N/A Reportable Quantity (RQ): N/ASpecial Precautions to Note:Environmental HazardsN/A Marine Pollutant? N/ASECTION 15 - REGULATORY INFORMATIONSARA 302 Components No Chemicals in this material are subject to the reportingrequirement of SARA Title III, Section 302.SARA 313 Components The following components are subject to reporting levelsestablished by SARA Title III, Section 313CAS No. Revision Date:Rosin 8050-09-7 03/01/2007SARA 311/312 Hazards Skin sensitizationCalifornia Prop. 65 ComponentsThis product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.T HIS PRODUCT IS R O HS3 COMPLIANTSECTION 16 - OTHER INFORMATIONFurther information:Judgments as to the suitability of information herein or the purchaser's purposes are necessarily the purchaser's responsibility. The above information does not represent any guarantee of the properties of the product. It is believed to be correct, but does not purport to be all inclusive and should be used only as a guide. Reasonable care has been taken in the preparation of this material, and is based on the present state of our knowledge.Superior Flux & Mfg. Co. shall not be held liable for any damage resulting from handling or from contact with the above product. There are NO WARRANTIES, NO REPRESENTATIONS AND NO RESPONSIBILITY AS TO THE ACCURACY OR THE SUITABILITY OF THIS INFORMATION FOR ANY PURCHASER'S USE OR FOR ANY CONSEQUENCE TO USE.Preparation informationSuperior Flux & Mfg. Co.440-349-3000。
MIL-STD-810和MIL-STD-461和IP等级
MIL-STD-810和MIL-STD--461和IP等级实验室简介广电计量—环境可靠性与电磁兼容试验中心（），创建于1958年，专业从事汽车、船舶、电工电子、机电、通信、铁道、航空等行业产品的检测和环境试验测量分析。
在环境适应性与可靠性试验技术、环境条件测量分析技术方面具有丰富经验。
实验室遵循ISO/IEC 17025和GB/T 15481管理体系。
技术能力与设备性能满足GJB、GB、CB和MIL、IEC、ISO、IMO、ASTM、ISTA、EN、NEBS等环境试验相关标准要求，在试验检测业务上具有独立性、公正性，可为各行业提供公证专业的环境及可靠性试验服务。
特色设备：35T大推力低频液压振动台；超大型气候试验箱（100m³-470 m³）；大型机柜防尘箱；10m³步入式盐雾和霉菌试验箱等。
实验室先后获得以下认可和授权：中国合格评定国家认可委员会认可（CNAS)国家质量监督检验检疫总局计量认可（CMA）国防科技工业实验室认可（DILAC)解放军总装备部军用认可实验室中国船级社认可（CCS）。
技术咨询服务产品机械环境评估与分析：为客户提供产品在振动、冲击等机械环境条件下的仿真分析、试验评价和改进设计，为缩短产品研发周期和提高产品质量与可靠性提供帮助，根据我们的经验帮助您改正潜在的结构弱点以节省时间和成本；产品故障模式分析：运用我们的技术和经验，帮助客户找出产品的故障原因，提出改进设计的建议，完善您的产品质量；试验夹具的设计和制造：本实验室曾为用户设计上百种夹具，并且能帮助你设计满足试验条件的夹具；试验规范的制定和评估：我们曾经编制及拥有数量众多的各类试验规范和标准，并在规范和标准的制定方面具有丰富的经验，能够对设计和工艺进行规范和试验以节约时间和成本；培训研讨会：我们经常组织培训和研讨会，和大家一起分享我们的智慧和经验.。
进出口动物源性食品中沃尼妙林及其同系物泰妙菌素残留量的测定方法高效液相色谱串联质谱法编制说明
《进出口动物源性食品中沃尼妙林及其同系物泰妙菌素残留量的测定方法高效液相色谱串联质谱法》编制说明一、任务来源本标准是按照国家认证认可监督管理委员会下达的，由河北出入境检验检疫局承担的行业标准修订任务。
本标准名称为《进出口动物源性食品中沃尼妙林及其同系物泰妙菌素残留量的测定方法高效液相色谱串联质谱法》，计划编号为2011B141。
二、编制依据本标准是按照GB/T 1.1-2009《标准化工作导则第1部分：标准的结构和编写的规则》、GB/T 20001.4-2001《标准编写规则第4部分：化学分析方法》和行业标准SN/T0001-1995《出口商品中农药、兽药残留量及生物毒素检验方法标准编写的基本规定》（以下简称《基本规定》）的要求编写的。
三、研究背景中国蜂蜜出口消费地多数是日本、美国、欧盟等世界贸易组织与环境委员会的成员。
2002年欧盟以氯霉素沃尼妙林和泰妙菌素是截短侧耳素类的衍生物，属于双萜类半合成抗生素，其抗菌活性很强，用于治疗畜禽的感染性疾病，尤其是对猪痢疾、猪腹泻及霉形体肺炎具有优异的治疗及预防效果，因此作为兽药和饲料添加剂而被广泛应用[1-6]。
但动物长期食用此类抗生素体内会产生蓄积，另外有一些饲养者,为了追求片面的经济利益，加入过量此类抗生素,造成了该抗生素残留，而后该抗生素通过食物链进入人体，对人类健康构成严重威胁[7]。
例如长期食用残留泰妙菌素的食品，可能造成人体肠道细菌菌群失调和结肠炎等的危险[8]。
因此，世界各国针对动物组织及相关产品中的沃尼妙林和泰妙菌素残留量作出了严格的限定。
如EMEA 和我国都规定了泰妙菌素和沃尼妙林最高残留限量[9]：肌肉中泰妙菌素为100μg/kg，沃尼妙林为50μg/kg，肝脏中都为500μg/kg；日本农林渔业部(MAFF)对动物肝脏、脂肪、肌肉组织中沃尼妙林和泰妙菌素的最高残留限量为0.04-6 mg/kg。
我国是畜禽饲养、生产、消费和贸易大国，畜禽肉出口市场主要集中在日本、韩国和欧盟等。
西湖化工西湖橡胶喷漆安全数据表说明书
Page:1/14SAFETY DATA SHEETFOR INDUSTRIAL USE ONLYE828RS /A100 500LB CLOSED HEADSection 1. Product and company identificationGHS product identifier : E828RS /A100 500LB CLOSED HEADMSDS Number : K122FProduct type : Epoxy ResinMaterial uses : Epoxy Resin SystemsManufacturer/Supplier/Importer:Westlake Epoxy Inc.12650 DIRECTORS DR STE 100Stafford, Texas 77477USAContact person:Telephone:For additional health and safety or regulatory information, call Emergency telephone number:For Emergency Medical AssistanceCall Health & Safety Information Services1-866-303-6949For Emergency Transportation InformationNCEC US Domestic +1 866 928 0789 (toll-free, US only)NCEC Americas +1 215 207 0061CANUTEC CA Domestic (613) 996-6666Section 2. Hazards identificationClassification of the substance or mixture : SKIN IRRITATION - Category 2 EYE IRRITATION - Category 2ASKIN SENSITISATION - Category 1GHS label elementsHazard pictograms:Signal word: WarningHazard statements : H315 Causes skin irritation.H319 Causes serious eye irritation.H317 May cause an allergic skin reaction. Precautionary statementsGeneral: Not applicable.Prevention: Wear eye or face protection.Avoid breathing vapor.Wash thoroughly after handling.Response : Take off contaminated clothing and wash it before reuse.Wash contaminated clothing before reuse.IF ON SKIN:Wash with plenty of water.IF IN EYES:Rinse cautiously with water for several minutes. Remove contactlenses, if present and easy to do. Continue rinsing.If eye irritation persists:Get medical advice or attention.Storage: Not applicable.Disposal: Dispose of contents and container in accordance with all local,regional, national and international regulations.: None known.Other hazards which do not resultin classificationSubstance/mixture : MixtureAn alternate description is CAS number 1675-54-3Any concentration shown as a range is to protect confidentiality or is due to batch variation.There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.Occupational exposure limits, if available, are listed in Section 8.Description of necessary first aid measuresEye contact: Immediately flush eyes with plenty of water, occasionally lifting theupper and lower eyelids. Check for and remove any contact lenses.Continue to rinse for at least 10 minutes. Get medical attention. Inhalation : Remove victim to fresh air and keep at rest in a position comfortablefor breathing. If not breathing, if breathing is irregular or if respiratoryarrest occurs, provide artificial respiration or oxygen by trainedpersonnel. It may be dangerous to the person providing aid to givemouth-to-mouth resuscitation. Get medical attention if adverse healtheffects persist or are severe. If unconscious, place in recovery positionand get medical attention immediately. Maintain an open airway.Loosen tight clothing such as a collar, tie, belt or waistband.Skin contact: Wash with plenty of soap and water. Remove contaminated clothingand shoes. Wash contaminated clothing thoroughly with water beforeremoving it, or wear gloves. Continue to rinse for at least 10 minutes.Get medical attention. In the event of any complaints or symptoms,avoid further exposure. Wash clothing before reuse. Clean shoesthoroughly before reuse.Ingestion: Wash out mouth with water. Remove dentures if any. Remove victimto fresh air and keep at rest in a position comfortable for breathing. Ifmaterial has been swallowed and the exposed person is conscious, givesmall quantities of water to drink. Stop if the exposed person feels sickas vomiting may be dangerous. Do not induce vomiting unless directedto do so by medical personnel. If vomiting occurs, the head should bekept low so that vomit does not enter the lungs. Get medical attentionif adverse health effects persist or are severe. Never give anything bymouth to an unconscious person. If unconscious, place in recoveryposition and get medical attention immediately. Maintain an openairway. Loosen tight clothing such as a collar, tie, belt or waistband. Indication of immediate medical attention and special treatment needed, if necessaryNotes to physician: Treat symptomatically. Contact poison treatment specialistimmediately if large quantities have been ingested or inhaled. Specific treatments: No specific treatment.Protection of first aid personnel: No action shall be taken involving any personal risk or withoutsuitable training. It may be dangerous to the person providing aid togive mouth-to-mouth resuscitation. Wash contaminated clothingthoroughly with water before removing it, or wear gloves.See toxicological information (Section 11)Extinguishing mediaSuitable extinguishing media: Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media : None known.Specific hazards arising from the chemical : In a fire or if heated, a pressure increase will occur and the container may burst.Hazardous thermal decomposition products : Decomposition products may include the following materials: carbon dioxidecarbon monoxidehalogenated compoundsSpecial protective actions for fire-fighters : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.Special protective equipment for fire-fighters : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.Personal precautions, protective equipment and emergency proceduresFor non-emergency personnel: No action shall be taken involving any personal risk or withoutsuitable training. Evacuate surrounding areas. Keep unnecessary andunprotected personnel from entering. Do not touch or walk throughspilled material. Avoid breathing vapor or mist. Provide adequateventilation. Wear appropriate respirator when ventilation isinadequate. Put on appropriate personal protective equipment.For emergency responders : If specialised clothing is required to deal with the spillage, take note ofany information in Section 8 on suitable and unsuitable materials. Seealso the information in "For non-emergency personnel". Environmental precautions: Avoid dispersal of spilled material and runoff and contact with soil,waterways, drains and sewers. Inform the relevant authorities if theproduct has caused environmental pollution (sewers, waterways, soilor air).Methods and material for containment and cleaning upSmall spill: Stop leak if without risk. Move containers from spill area. Dilute withwater and mop up if water-soluble. Alternatively, or if water-insoluble,absorb with an inert dry material and place in an appropriate wastedisposal container. Dispose of via a licensed waste disposal contractor.Large spill: Stop leak if without risk. Move containers from spill area. Approachrelease from upwind. Prevent entry into sewers, water courses,basements or confined areas. Wash spillages into an effluent treatmentplant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite ordiatomaceous earth and place in container for disposal according tolocal regulations (see section 13 of SDS). Dispose of via a licensedwaste disposal contractor. Contaminated absorbent material may posethe same hazard as the spilled product. Note: see section 1 of SDS foremergency contact information and section 13 of SDS for wastedisposal.Precautions for safe handlingProtective measures: Put on appropriate personal protective equipment (see section 8 ofSDS). Persons with a history of skin sensitization problems should notbe employed in any process in which this product is used. Do not getin eyes or on skin or clothing. Do not ingest. Avoid breathing vapor ormist. Keep in the original container or an approved alternative madefrom a compatible material, kept tightly closed when not in use.Empty containers retain product residue and can be hazardous. Do notreuse container.Advice on general occupational hygiene : Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. Seealso Section 8 for additional information on hygiene measures.Conditions for safe storage, : Store in accordance with local regulations. Store in original containerincluding any incompatibilities protected from direct sunlight in a dry, cool and well-ventilated area,away from incompatible materials (see section 10 of SDS) and foodand drink. Keep container tightly closed and sealed until ready for use.Containers that have been opened must be carefully resealed and keptupright to prevent leakage. Do not store in unlabeled containers. Useappropriate containment to avoid environmental contamination.Control parametersOccupational exposure limitsRecommended monitoring procedures : If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required todetermine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Reference should be made to appropriate monitoring standards. Reference tonational guidance documents for methods for the determination ofhazardous substances will also be required.If this product containsingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Reference should be made toappropriate monitoring standards. Reference to national guidancedocuments for methods for the determination of hazardous substances will also be required.Appropriate engineering controls: No special ventilation requirements. Good general ventilation shouldbe sufficient to control worker exposure to airborne contaminants. Ifthis product contains ingredients with exposure limits, use processenclosures, local exhaust ventilation or other engineering controls tokeep worker exposure below any recommended or statutory limits. Environmental exposure controls : Emissions from ventilation or work process equipment should bechecked to ensure they comply with the requirements of environmentalprotection legislation. In some cases, fume scrubbers, filters orengineering modifications to the process equipment will be necessaryto reduce emissions to acceptable levels.Individual protection measuresHygiene measures : Wash hands, forearms and face thoroughly after handling chemicalproducts, before eating, smoking and using the lavatory and at the endof the working period. Appropriate techniques should be used toremove potentially contaminated clothing. Contaminated workclothing should not be allowed out of the workplace. Washcontaminated clothing before reusing. Ensure that eyewash stationsand safety showers are close to the workstation location.Eye/face protection: Safety eyewear complying with an approved standard should be usedwhen a risk assessment indicates this is necessary to avoid exposure toliquid splashes, mists, gases or dusts. If contact is possible, thefollowing protection should be worn, unless the assessment indicates ahigher degree of protection: chemical splash goggles.Skin protectionHand protection: Chemical-resistant, impervious gloves complying with an approvedstandard should be worn at all times when handling chemical productsif a risk assessment indicates this is necessary. Considering theparameters specified by the glove manufacturer, check during use thatthe gloves are still retaining their protective properties. It should benoted that the time to breakthrough for any glove material may bedifferent for different glove manufacturers. In the case of mixtures,consisting of several substances, the protection time of the glovescannot be accurately estimated.Body protection : Personal protective equipment for the body should be selected basedon the task being performed and the risks involved and should beapproved by a specialist before handling this product.Other skin protection : Appropriate footwear and any additional skin protection measuresshould be selected based on the task being performed and the risksinvolved and should be approved by a specialist before handling thisproduct.Respiratory protection : Based on the hazard and potential for exposure, select a respirator thatmeets the appropriate standard or certification. Respirators must beused according to a respiratory protection program to ensure properfitting, training, and other important aspects of use.AppearancePhysical state : Viscous liquid.Color: Clear.Odor: Not availableOdor threshold: Not availablepH: Not availableMelting point/ Freezing point: Not availableBoiling point: 260 °C (500 °F)Flash point : Pensky-Martens Closed Cup: 251 °C (484 °F) (ASTM D 93) Burning time : Not availableBurning rate : Not availableEvaporation rate : Not availableFlammability (solid, gas): Not availableLower and upper explosive (flammable) limits : Lower: Not available Upper: Not availableVapor pressure : 0.03 mbar @ 77 °C (171 °F) Vapor density: Not availableRelative density: 1.17 Solubility: Not available Solubility in water : NegligiblePartition coefficient: n-octanol/water : Not availableNot applicable.Auto-ignition temperature : Not availableDecomposition temperature: Not availableSADT: Not availableViscosity: Dynamic: Not availableKinematic: Not availableOther informationNo additional information.Reactivity: Stable under normal conditions.Chemical stability : The product is stable.Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions willnot occur.Conditions to avoid : No specific data.Incompatible materials : No specific data.Hazardous decomposition products : Under normal conditions of storage and use, hazardous decompositionproducts should not be produced.Other hazards Reacts with considerable heat release with some curing agents.Information on toxicological effectsAcute toxicityIrritation/CorrosionSkin: Not available eyes: Not available Respiratory: Not available SensitizationSkin: Not available Respiratory: Not available MutagenicityCarcinogenicityConclusion/Summary: Not availableReproductive toxicityConclusion/Summary: Not availableTeratogenicityConclusion/Summary: Not availableSpecific target organ toxicity (single exposure)Not availableSpecific target organ toxicity (repeated exposure)Not availableAspiration hazardNot available: Not availableInformation on likely routes ofexposurePotential acute health effectsEye contact : Causes serious eye irritation.Inhalation : No known significant effects or critical hazards.Skin contact: Causes skin irritation. May cause an allergic skin reaction. Ingestion: No known significant effects or critical hazards. Symptoms related to the physical, chemical and toxicological characteristicsEye contact : Adverse symptoms may include the following:pain or irritationwateringrednessInhalation : No specific data.Skin contact : Adverse symptoms may include the following:irritationrednessIngestion: No specific data.Delayed and immediate effects as well as chronic effects from short and long-term exposureShort term exposurePotential immediate effects: Not availablePotential delayed effects : Not availableLong term exposurePotential immediate effects: Not availablePotential delayed effects : Not availablePotential chronic health effectsConclusion/Summary: Not availableGeneral : Once sensitized, a severe allergic reaction may occur whensubsequently exposed to very low levels. Carcinogenicity: No known significant effects or critical hazards. Mutagenicity : No known significant effects or critical hazards. Teratogenicity : No known significant effects or critical hazards. Developmental effects: No known significant effects or critical hazards.Fertility effects: No known significant effects or critical hazards. Numerical measures of toxicityAcute toxicity estimatesToxicityConclusion/Summary: Not availablePersistence/degradabilityConclusion/Summary: Not availableBioaccumulative potentialMobility in soilSoil/water partition coefficient(KOC): Not availableOther adverse effects : No known significant effects or critical hazards.Disposal methods : The generation of waste should be avoided or minimized whereverpossible. Disposal of this product, solutions and any by-productsshould at all times comply with the requirements of environmentalprotection and waste disposal legislation and any regional localauthority requirements. Dispose of surplus and non-recyclableproducts via a licensed waste disposal contractor. Waste should not bedisposed of untreated to the sewer unless fully compliant with therequirements of all authorities with jurisdiction. Waste packagingshould be recycled. Incineration or landfill should only be consideredwhen recycling is not feasible. This material and its container must bedisposed of in a safe way. Care should be taken when handlingemptied containers that have not been cleaned or rinsed out. Emptycontainers or liners may retain some product residues. Avoid dispersalof spilled material and runoff and contact with soil, waterways, drainsand sewers.The data provided in this section is for information only and may not be specific to your package size ormode of transport. You will need to apply the appropriate regulations to properly classify your shipment for transportation.International transport regulationsRegulatory information UN/NAnumberProper shipping name Classes/*PG ReportableQuantity (RQ)CFR Non-regulated TDG Non-regulatedClass 9 IIIIMO/IMDG3082ENVIRONMENTALLYHAZARDOUS SUBSTANCE,LIQUID, N.O.S.(LIQUID EPOXY RESIN)Class 9 IIIIATA (Cargo)3082ENVIRONMENTALLYHAZARDOUS SUBSTANCE,LIQUID, N.O.S.(LIQUID EPOXY RESIN)*PG : Packing groupEnvironmentally hazardous and/or Marine Pollutant :Yes.Special precautions for user: Transport within user’s premises: always transport in closedcontainers that are upright and secure. Ensure that personstransporting the product know what to do in the event of an accidentor spillage.Section 15. Regulatory informationUnited StatesU.S. Federal regulations :United States - TSCA 12(b) - Chemical export notification: Nonerequired.United States - TSCA 5α2 - Final significant new use rules: Not listedUnited States - TSCA 5α2 - Proposed significant new use rules: NotlistedUnited States - TSCA 5(e) - Substances consent order: Not listedSARA 311/312 Classification - SKIN IRRITATION, Category 2SARA 311/312 Classification - EYE IRRITATION, Category 2ASARA 311/312 Classification - SKIN SENSITISATION, Category 1SARA 311/312 Classification - Not applicableCalifornia Prop. 65:WARNING: This product may contain one or more chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.: All components are active or exempted.United States inventory (TSCA8b)International regulationsInternational lists : Canada inventory: All components are listed or exempted.China inventory (IECSC): All components are listed or exempted.Korea inventory (KECI): All components are listed or exempted.New Zealand Inventory (NZIoC): All components are listed or exempted.Philippines inventory (PICCS): All components are listed or exempted.United States inventory (TSCA 8b): All components are active or exempted.Taiwan inventory (TCSI): All components are listed or exempted.representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS®materials may be purchased exclusively from J. J. Keller (800) 327-6868.The customer is responsible for determining the PPE code for this material. For more information on HMIS®Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.: Not applicable.Full text of abbreviated HstatementsHistoryDate of printing : 01/30/2023Date of issue/Date of revision: 09/21/2022Date of previous issue : 03/30/2022Version: 21.0Prepared by : Product Safety StewardshipKey to abbreviations : ATE = Acute Toxicity EstimateBCF = Bioconcentration FactorGHS = Globally Harmonized System of Classification and Labelling of ChemicalsIATA = International Air Transport AssociationIBC = Intermediate Bulk ContainerIMDG = International Maritime Dangerous GoodsLogPow = logarithm of the octanol/water partition coefficientMARPOL = International Convention for the Prevention of Pollution From Ships, 1973as modified by the Protocol of 1978. ("Marpol" = marine pollution)RID = The Regulations concerning the International Carriage of Dangerous Goods byRailUN = United NationsReferences : Not availableNotice to readerThe information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.。
菲尼克斯工具样本1
菲尼克斯⼯具样本1Overview of connectors of crimping toolsFerrules for insulated and non-insulated contactsCrimping tool designation Order no.Conductor cross-section [mm2]Conductor cross-section [AWG]Page CRIMPFOX 6 12120340.25 – 624 – 1018CRIMPFOX 6S-F 12120430.5 – 620 – 1018CRIMPFOX 6T 12120370.25 – 620 – 1018CRIMPFOX 6T-F 12120380.25 – 620 – 1018CRIMPFOX 10S 12120450.14 – 1025 – 718CRIMPFOX 6H 12120460.14 – 625 – 1018CRIMPFOX 25R121203910 – 258 – 418CRIMPFOX 50R121204135 – 50 2 – 118 Cable lugs and connectorsCrimping tool designation Order no.Conductor cross-section [mm2]Conductor cross-section [AWG]Page CRIMPFOX-RCI 1 12120550.14 – 126 – 1819CRIMPFOX-RCI 2,5 12120530.75 – 2.520 – 1419CRIMPFOX-RCI 6 12120570.75 – 620 – 1019CRIMPFOX-RCI 6-1 12120590.75 – 620 – 1019 Non-insulated cable lugsCrimping tool designation Order no.Conductor cross-section [mm2]Conductor cross-section [AWG]Page CRIMPFOX RC 2,5 12120630.75 – 2.520 – 1419CRIMPFOX RC 101212061 4 – 1012 – 819CRIMPFOX RC 251212065 4 – 1012 – 819CRIMPFOX RCT 25-1 (tube lugs) 121206610 – 258 – 419 Non-insulated slip-on sleevesCrimping tool designation Order no.Conductor cross-section [mm2]Conductor cross-section [AWG]Page CRIMPFOX-SC 1,5 12120480.1 – 1.526 – 1620CRIMPFOX-SC 6L 12120520.5 – 622 – 1020CRIMPFOX-SC 6 12120500.5 – 622 – 1020T urned contactsCrimping tool designation Order no.Conductor cross-section [mm2]Conductor cross-section [AWG]Page CRIMPFOX-TC 4 12121130.5 – 422 – 1220CRIMPFOX-TC 101212114 4 – 1012 – 820Coaxial connector / FO connectorCrimping tool designation Order no.Hexagonal wrench size [mm]PageCRIMPFOX-CX 4,52 1212094 1.69 / 3.25 / 4.5220CRIMPFOX-CX 6,48 1212095 1.69 / 5.41 / 6.4820CRIMPFOX-CX 9,14 1212096 1.73 / 8.23 / 9.1420CRIMPFOX-CX 10,54 1212097 2.54 / 10.5420CRIMPFOX-CX 10,90 1212098 2.54 / 10.9020CRIMPFOX-FO 5,41 1212099 3.25 / 3.84 / 4.52 / 5.0 / 5.4121D-SUB contactsCrimping tool designation Order no.Conductor cross-section [mm2]Conductor cross-section [AWG]PageCRIMPFOX-DSUB 5 12121110.08 – 0.528 – 2221Crimp-snap-in contactsCrimping tool designation Order no.Conductor cross-section [mm2]Conductor cross-section [AWG]PageCRIMPFOX MT 2,5 12040380.5 – 2.520 – 1221PhOENIX CONTACT17CRIMPFOX crimping toolsCrimping pliers for ferrulesThe CRIMPFOX pliers are fitted with apressure lock (unlockable). An innovativeconstruction and ergonomically designedhandles reduce the required manual forces.The self-adjusting CRIMPFOX 6T dieautomatically adapts to the connector size.Type Order no.CRIMPFOX 6 1212034CRIMPFOX 6T 1212037 Conductor [mm2] / AWG0.25 – 6 / 24 – 100.25 – 6 / 20 – 10 AccessoriesSpare die CRIMPFOX 6/DIE 1212035CRIMPFOX 6T/DIE 1212298 The self-adjusting die with front conductorentry of the crimping pliers automaticallyadapts to the connector size and isimpressive due to a fast and reliable contactprocessing.Type Order no.CRIMPFOX 6S-F 1212043CRIMPFOX 6T-F 1212038 Conductor [mm2] / AWG0.5 – 6 / 20 – 100.25 – 6 / 20 –10AccessoriesSpare die CRIMPFOX 6S-F/DIE 1212285CRIMPFOX 6T-F/DIE 1212297 Great importance has been placed onenergy-saving work with the compactcrimping pliers. The way in which thehandles and the die are arranged means thatthe ferrules can be fitted however the toolis held.Type Order no.CRIMPFOX 6H 1212046CRIMPFOX 10S 1212045 Conductor [mm2] / AWG0.14 – 6 / 25 – 100.14 – 10 / 25 –7The crimping pliers help in processingferrules up to 50 mm2. The ergonomicallyformed handles and the optimizedmechanical transmission ensure optimumhold and reduce the force needed by 25%.Type Order no.CRIMPFOX 25R 1212039CRIMPFOX 50R 1212041 Conductor [mm2] / AWG10 – 25 / 8 – 435 – 50 / 2 – 1 AccessoriesSpare die CRIMPFOX 25R/DIE 1212040CRIMPFOX 50R/DIE 1212042 18PhOENIX CONTACTCRIMPFOX crimping toolsCrimping pliers for insulated cable lugs and connectorsA color marking on the die clearly allocatesthe cross-section of the CRIMPFOX RCIpliers. The precisely manufactured diesprovide a uniformly high quality during thecontact processing.Type Order no.CRIMPFOX-RCI 1 1212055CRIMPFOX-RCI 2,5 1212053CRIMPFOX-RCI 6 1212057 Conductor [mm2] / AWG0.14 – 1 / 26 – 180.75 – 2.5 / 20 – 140.75 – 6 / 20 – 10AccessoriesSpare die CRIMPFOX-RCI 1/DIE 1212056CRIMPFOX-RCI 2,5/DIE 1212054CRIMPFOX-RCI 6/DIE 1212058 The CRIMPFOX-RCI 6-1 is suitable for theasymmetrical crimping of insulated cablelugs and connectors.Type Order no.CRIMPFOX-RCI 6-1 1212059Conductor [mm2] / AWG0.75 – 6 / 20 – 10AccessoriesSpare die CRIMPFOX-RCI 6-1/DIE 1212290Crimping pliers for non-insulated cable lugs and tube lugsThe CRIMPFOX-RC is characterized by itscompact and light design. The conductorentry is lateral. Three labeled die stationsserve for precise processing of the relevantcross-sections.Type Order no.CRIMPFOX-RC 2,5 1212063CRIMPFOX-RC 10 1212061CRIMPFOX-RC 25 1212065 Conductor [mm2] / AWG0.75 – 2.5 / 20 – 14 4 – 10 / 12 – 810 – 25 / 8 – 4AccessoriesSpare die CRIMPFOX-RC 2,5/DIE 1212064CRIMPFOX-RC 10/DIE 1212062CRIMPFOX-RC 25/DIE 1212299 The CRIMPFOX-RCT 25-1 serves toprocess standard tube lugs.Type Order no.CRIMPFOX-RCT 25-1 1212066Die station [mm]10 – 25 / 8 – 4AccessoriesSpare die CRIMPFOX-RCT 25/DIE 1212300PhOENIX CONTACT19CRIMPFOX crimping toolsCrimping pliers for non-insulated slip-on sleevesThe CRIMPFOX-SC … serves to processnon-insulated flat connectors and slip-on sleeves up to 6 mm2. The marked diestations ensure precise processing. TheCRIMPFOX-SC 6L serves as an additionalpositioning aid.Type Order no.CRIMPFOX-SC 1,5 1212048CRIMPFOX-SC 6 1212050CRIMPFOX-SC 6L 1212052 Conductor [mm2] / AWG0.1 – 1.5 / 26 – 160.5 – 6 / 22 – 100.5 – 6 / 22 – 10AccessoriesSpare die CRIMPFOX-SC 1,5/DIE 1212049CRIMPFOX-SC 6/DIE 1212051CRIMPFOX-SC 6/DIE 1212051 Crimping pliers for turned contactsThe CRIMPFOX-TC … are crimping pliersfor processing turned contacts up to10 mm2. The integrated locator serves inaccurate positioning of the contacts withpin diameter of 1.6, 2.5 and 4 mm in thedie.Type Order no.CRIMPFOX-TC 4 1212113CRIMPFOX-TC 10 1212114Conductor [mm2] / AWG0.5 – 4 / 22 – 12 4 – 10 / 12 – 8AccessoriesSpare die CRIMPFOX-TC 4/DIE 1212295CRIMPFOX-TC 10/DIE 1212296Crimping pliers for coaxial connectorsThe CRIMPFOX-CX … are crimping pliersfor processing coaxial connectors. Equippedwith a pressure lock, the pliers provideuniformly high quality crimping.See page 15 for 2 and 3-stage stripping tools.Type Order no.CRIMPFOX-CX 4,52 1212094CRIMPFOX-CX 6,48 1212095CRIMPFOX-CX 9,14 1212096 Hexagonal wrench widthDie stations 1 / 2 / 3 [mm] 1.69 / 3.25 / 4.52 1.69 / 5.41 / 6.48 1.73 / 8.23 / 9.14AccessoriesSpare die CRIMPFOX-CX 4,52/DIE 1212284CRIMPFOX-CX 6,48/DIE 1212286CRIMPFOX-CX 9,14/DIE 1212293 Type Order no.CRIMPFOX-CX 10,54 1212097CRIMPFOX-CX 10,90 1212098Hexagonal wrench sizeDie stations 1 / 2 [mm] 2.54 / 10.54 2.54 / 10.90AccessoriesSpare die CRIMPFOX-CX 10,54/DIE 1212291CRIMPFOX-CX 10,90/DIE 121229220PhOENIX CONTACTCRIMPFOX crimping toolsCrimping pliers for FO connectorsThe CRIMPFOX-FO serves to process FOconnectors. The five marked die stationsfacilitate precise processing of differentcontact sizes.Type Order no.CRIMPFOX-FO 5,41 1212099Hexagonal wrench sizeDie stations 1 – 5 [mm] 3.25 / 3.84 / 4.52 / 5.0 / 5.41AccessoriesSpare die CRIMPFOX-FO 5,41/DIE 1212294Crimping pliers for D-SUB contactsThe CRIMPFOX-D SUB crimping pliers withintegrated contact processes high densityand standard contacts of 0.08 – 0.5 mm2.Type Order no.CRIMPFOX-DSUB 5 1212111Conductor [mm2] / AWG0.08 – 0.5 / 28 – 22AccessoriesSpare die CRIMPFOX-DSUB 5/DIE 1212287Crimping pliers for crimp snap-in contactsThe CRIMPFOX MT 2,5 is designed for thefollowing Phoenix Contact contacts fromthe COMBICON product range:3190564 MSTBC-MT 0,5-1,03190551 MSTBC-MT 1,5-2,53190577 ICC-MT 0,5-1,03190580 ICC-MT 1,5-2,53190438 STG-MTN 0,5-1,03190506 STG-MTN 1,5-2,5Type Order no.CRIMPFOX MT 2,5 1204038Conductor [mm2] / AWG0.5 – 2.5 / 20 – 12AccessoriesSpare die CRIMPFOX MT 2,5 DIE 1208050PhOENIX CONTACT21CRIMPFOX crimping toolsUniversal pliers for accommodating different crimp insertsAn excellent feature of the CRIMPFOX-Mcrimping pliers is the quick replacement ofcrimp inserts without the use of tools. Thelarge number of inserts makes it a space-saving universal tool for all applications.Type Order no.CRIMPFOX-M 1212072CRIMPFOX-M SET 1212093Basic pliers without die Contents: CRIMPFOX and dies1212074, 1212079, 1212080, 1212081AccessoriesDie, für ferrules0.25 – 10 mm2CRIMPFOX-M 10/DIE 1212080CRIMPFOX-M 10/DIE 1212080(included in the set) 16 – 25 mm2CRIMPFOX-M 25/DIE 1212081CRIMPFOX-M 25/DIE 1212081(included in the set) 35 – 50 mm2CRIMPFOX-M 50/DIE1212082CRIMPFOX-M 50/DIE 1212082Die, for insulated cable lugs0.5 – 1.5 mm2 and 1.5 – 2.5 mm2CRIMPFOX-M RCI 2,5/DIE 1212074CRIMPFOX-M RCI 2,5/DIE 1212074(included in the set) 0.1 – 0.4 mm2 and 4 – 6 mm2CRIMPFOX-M RCI 6/DIE 1212073CRIMPFOX-M RCI 6/DIE 1212073Die, for non-insulated cable lugs0.75 – 2.5 mm2CRIMPFOX-M RC 2,5/DIE 1212078CRIMPFOX-M RC 2,5/DIE 12120780.5 – 6 mm2CRIMPFOX-M RC 6/DIE 1212079CRIMPFOX-M RC 6/DIE 1212079(included in the set) 4 – 10mm2CRIMPFOX-M RC 10/DIE 1212077CRIMPFOX-M RC 10/DIE 1212077Die, for non-insulated slip-on sleeves0.1 – 1 mm2CRIMPFOX-M SC 1/DIE 1212083CRIMPFOX-M SC 1/DIE 12120830.5 – 2.5 mm2CRIMPFOX-M SC 2,5/DIE 1212084CRIMPFOX-M SC 2,5/DIE 12120840.5 – 6 mm2CRIMPFOX-M SC 6/DIE 1212085CRIMPFOX-M SC 6/DIE 1212085Die, for turned contacts2.5 – 4.0 mm2 / cross-section 0.14 – 4 mm2CRIMPFOX-M TC 4/DIE 1212075CRIMPFOX-M TC 4/DIE 12120754.0 mm2 / cross-section 6 – 10 mm2CRIMPFOX-M TC 10/DIE 1212076CRIMPFOX-M TC 10/DIE 1212076Die, for coaxial connectorsRG 174, RG 179, BNC, TNC CRIMPFOX-M CX 1/DIE 1212087CRIMPFOX-M CX 1/DIE 1212087RG 58, RG 59, RG 62, RG 71, BNC, TNC CRIMPFOX-M CX 2/DIE 1212088CRIMPFOX-M CX 2/DIE 1212088 CATV RG 6,59CRIMPFOX-M CX 3/DIE 1212089CRIMPFOX-M CX 3/DIE 1212089Die, for unshielded RJ45 connectors CRIMPFOX-M RJ45/DIE 1212090CRIMPFOX-M RJ45/DIE 1212090 Die, for unshielded RJ11 connectors CRIMPFOX-M RJ11/DIE 1212091CRIMPFOX-M RJ11/DIE 1212091 Die, for shrink butt connectors0.1 – 0.4 mm2 and 4 – 6 mm2CRIMPFOX-M HS-1/DIE 1212282CRIMPFOX-M HS-1/DIE 121228222PhOENIX CONTACTCRIMPFOX crimping toolsUniversal pliers for accommodating different crimp insertsThe wide variety of dies makes theCRIMPFOX-C … universal crimping pliersup to 120 mm2. Easy fold back jaw holdersallow quick replacement of dies. Amechanical drive system minimizes the forceneeded.Type Order no.CRIMPFOX-C50 1212340CRIMPFOX-C120 1212318Accessories: Die combinationsfor ferrulesUpper part of die50 mm2,70 mm2CRIMPFOX-C120 AI 70/M-DIE 121233595 mm2CRIMPFOX-C120 AI 95/M-DIE 1212336Lower part of die50 mm2CRIMPFOX-C120 AI 50/F-DIE 121233770 mm2CRIMPFOX-C120 AI 70/F-DIE 121233895 mm2CRIMPFOX-C120 AI 95/F-DIE 1212339Accessories: Die combinationsfor non-insulated cable lugsUpper part of die6 – 35 mm2CRIMPFOX-C50 RC 35/M-DIE 12123436 – 70 mm2CRIMPFOX-C120 RC 70/M-DIE 1212331Lower part of die25 mm2CRIMPFOX-C50 RC 25/F-DIE 121234435 mm2CRIMPFOX-C50 RC 35/F-DIE 121234510, 16, 25, 35 mm2CRIMPFOX-C120 RC 35/F-DIE 12123326, 50 mm2CRIMPFOX-C120 RC 50/F-DIE 121233310, 70 mm2CRIMPFOX-C120 RC 70/F-DIE 1212334Accessories: Die pairfor insulated cable lugs10 mm2CRIMPFOX-C50 RCI 10/DIE 1212346CRIMPFOX-C120 RCI 10/DIE 121232716 mm2CRIMPFOX-C50 RCI 16/DIE 1212347CRIMPFOX-C120 RCI 16/DIE 121232825 mm2CRIMPFOX-C50 RCI 25/DIE 1212348CRIMPFOX-C120 RCI 25/DIE 121232935 mm2CRIMPFOX-C120 RCI 35/DIE 1212330Accessories: Die pairfor copper tube lugs35 mm2CRIMPFOX-C50 RCT 35-1/DIE 121234116, 35 mm2CRIMPFOX-C120 RCT 35-1/DIE 121232050 mm2CRIMPFOX-C50 RCT 50-1/DIE 121234225, 50 mm2CRIMPFOX-C120 RCT 50-1/DIE 121232110, 70 mm2CRIMPFOX-C120 RCT 70-1/DIE 121231995 mm2CRIMPFOX-C120 RCT 95-1/DIE 1212322120 mm2CRIMPFOX-C120 RCT 120-1/DIE 1212323Accessories: Pre-round die pairfor sector cable25, 35 mm2CRIMPFOX-C50 R25-35/DIE 121234935, 50 mm2CRIMPFOX-C50 R35-50/DIE 121235050, 70 mm2CRIMPFOX-C50 R50-70/DIE 121235125, 50 mm2CRIMPFOX-C120 R25-50/DIE 121232435, 70 mm2CRIMPFOX-C120 R35-70/DIE 121232595 mm2CRIMPFOX-C120 R95/DIE 1212326PhOENIX CONTACT23CRIMPFOX – The right connectors for the CRIMPFOX seriesFerrules with and without insulating collarFerrules from Phoenix Contact areavailable in different versions and colorcodes with and without plastic sleeves.All the versions are CSA-certified.Description Ferrules Ferrules Ferrules XL TWIN ferrulesVersion [mm2] / AWG0.25 – 35 / 24 – 20.25 – 120 / 24 – 5 1.5 – 16 / 16 – 6 2 x 0.5 – 2 x 16 / 2 x 20 – 2 x 6according to DIN 46228-1according to DIN 46228-4/NFC 63-023large insulating collar diameter large insulating collar diameterColor silver colored various color codes various colors various colorsFor more technical data and drawings, see www.phoenixcontact.de/eshop Ring and fork-type cable lugsThe ring and fork-type cable lugs have ahard-soldered neck and attain maximumconductor pull-out forces in connectionwith the CRIMPFOX RC/…R CI pliers.Description Ring cable lugs Ring cable lugs Fork-type cable lugs Fork-type cable lugs Version [mm2] / AWG 1 – 240 / 18 –500 1.5 – 10 / 16 – 8 1.5 – 6 / 16 – 10 1.5 – 6 / 16 – 10 Color silver colored various colors silver colored various colorsFor more technical data and drawings, see www.phoenixcontact.de/eshop Slip-on sleeves, flat connectorsEASY ENTRY – easy and safeconductor entryHard-soldered crimping zone formaximum pull-out forcesElectrolytically tin-platedHalogen-freeDescription Flat connectors Flat connectors Slip-on sleeves Slip-on sleeves Version [mm2] / AWG 1.5 – 2.5 / 16 – 14 1.5 – 6 / 16 – 10 1 – 6 / 18 – 10 1.5 – 6 / 16 – 10 Color silver colored various colors silver colored various colorsFor more technical data and drawings, see www.phoenixcontact.de/eshop Flat pin and pin cable lugsEASY ENTRY – easy and safeconductor entryHard-soldered crimping zone formaximum pull-out forcesElectrolytically tin-platedHalogen-freeDescription Flat pin cable lugs Pin cable lugsVersion [mm2] / AWG 1.5 – 6 / 16 – 10 1.5 – 6 / 16 – 10Color various colors various colorsFor more technical data and drawings, see www.phoenixcontact.de/eshop24PhOENIX CONTACTT ool and crimping setsTOOL DATA SET Order no. 1208856TOOL SET ALLROUND 2Order No 1208843TOOL SET ALLROUND 3Order No 1208953Set for cutting, stripping and crimpingconsisting of:Cable cutter for copper and aluminum with a diameter up ?to 12 mm, CUTFOX 12Stripping tool for stripping multicore signal, control and ?glass fiber wires of 2.5 – 11 mm diameter, WIREFOX-D11 Basic pliers for accommodating dies for different contact ? types, CRIMPFOX-MDie for CRIMPFOX-M, for unshielded RJ45 connectors ? Set for cutting, stripping and crimpingconsisting of:Cable cutter for copper and aluminum with a diameterup to 12 mm, CUTFOX 12Stripping tool for conductors and cables 0.02 – 10 mm2,WIREFOX 10Crimping pliers for ferrules for of 0.14 – 10 mm2,CRIMPFOX 10SSet for stripping, crimping and screwingconsisting of:Stripping tool for conductors and cables 0.02 – 10 mm2,WIREFOX 10Crimping pliers with integrated pressure lock for ferrulesof 0.5 – 6 mm2, with self-aligned die, insertion from thefront, CRIMPFOX 6S-FFerrules, 50 pcs. each:– AI 2,5-8 BUFerrules, 100 pcs. each:– AI 0,75-8 GY– AI 1-8 RD– AI 1,5-8 BKScrewdriver for slotted-head screws, SZF 1-0,6X3,5TOOL-KIT STANDARD Order no. 1212422CRIMPSET 6Order no. 1202072AI SORTI BOX RD Order no. 3202960 Set for cutting, stripping, crimping and screwingconsisting of:Front cable cutter for copper and aluminum with a ?diameter up to 18 mm (up to 50 mm2) CUTFOX 18 Stripping tool for stripping wires of 4.5 – 40 mm of ? diameter with insulating thickness up to 4.5 mm WIREFOX-D 40Stripping pliers for stripping of conductors and cables of ?0.02 – 10 mm2 WIREFOX 10Crimping pliers for ferrules with self-aligned die, front ?conductor entry and unlockable pressure lock CRIMPFOX 6S-FScrewdriver SZF 1-0,6X3,5Assortment box, metalconsisting of:Ferrules in accordance with DIN 46228-4:1990-09, CSA-certified500 pcs. each:– AI 0,25-6 YE– AI 0,34-6 TQ– AI 0,5-8 WH– AI 0,75-8 GY– AI 1-8 RD– AI 1,5-8 BK300 pcs.:– AI 2,5-8 BU200 pcs.:100 pcs.:– AI 6-12 YEStripping tool for wires and conductors up to 6 mm2Crimping pliers with integrated pressure lock for ferrulesof 0.5 – 6 mm2, insertion from the frontAssortment box, redconsisting of:Ferrules in accordance with DIN 46228-4,CSA-certified50 pcs. each:– AI 0,5-8 WH, AI 2,5-8 BU100 pcs. each:– AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BKFor more assortment boxes, seewww.phoenixcontact.de/eshopPhOENIX CONTACT2526 PhOENIX CONTACTThe screwdrivers from Phoenix Contact are adapted optimally to the terminal block screws. This and ergonomically designed handles facilitate the transmission of the required torques with adequate force. Finely adjustable torque and battery-powered screwdrivers round off the product range.Maximum force transferDual-component handles and handles with good grip ensure an optimum hold, thus making work fatigue-free.Precise torqueThe finely adjustable torque allows tocustomize various screw sizes optimally and ensures constant torque any time.Battery-powered screwdriver The extremely accurate battery-powered torque screwdriver, ASD 21 is the ideal one-hand tool for effectively connecting conductors to screw connections.SCREWFOXScrewdriver and torque screwdriverSCREWFOX screwdriver toolsScrewdriver to actuate spring and quick connection terminal blocksIn addition to their standard applications,the screwdrivers of the SZF series are alsosuitable for actuating the modular terminalblocks of the ST … and QTC … series.Type Order no.Blade: 0.4 x 2.5 x 75 mm, length: 156 mm SZF 0-0,4X2,5 1204504Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZF 1-0,6X3,5 1204517ST-BW 1207608Blade: 0.8 x 4.0 x 100 mm, length: 198 mm SZF 2-0,8X4,0 1204520Blade: 1.0 x 5.5 x 150 mm, length: 248 mm SZF 3-1,0X5,5 1206612Philips screwdriver, VDE Philips screwdriverScrewdrivers from Phoenix Contact withtheir blades ensure a large bearing surfacein the screw head. Only in this way can therequired torque be achieved.Type Order no.Blade: 0.4 x 2.0 x 60 mm, length: 157 mm SZS 0,4X2,0 1205202Blade: 0.6 x 3.5 x 100 mm, length: 181 mm SZS 0,6X3,5 1205053Blade: 1.0 x 5.5 x 150 mm, length: 248 mm SZS 0,4X2,5 1205037Blade: 0.4 x 2.5 x 75 mm, length: 156 mm SZS 0,5X3,0 1207404Blade: 1.0 x 5.5 x 150 mm, length: 248 mm SZS 0,6X2,5 1205040Blade: 0.4 x 2.5 x 75 mm, length: 156 mm SZS 1,0X4,0 1205066Blade: 1.0 x 5.5 x 150 mm, length: 248 mm SZS 1,0X5,5 1209114Blade: 0.4 x 2.5 x 75 mm, length: 156 mm SZS 1,0X6,5 1205079Blade: 1.0 x 5.5 x 150 mm, length: 248 mm SZS 1,2X8,0 1205082VDE screwdriver for test socket screwsThe SZG … screwdrivers are ideal for slip-free and safe drive of the test socket screwswith 2.3 und 4 mm diameter.Type Order no.Blade: 0.6 x 3.5 x 100 mm, length: 198 mm SZG 0,6X3,5 1205121Blade: 0.9 x 6.5 x 175 mm, length: 287 mm SZG 0,9X6,5 1205134VDE Phillips screwdrivers with Phillips and Pozidriv drive.The VDE protection-insulated screwdriversfor Phillips screws are available in thePozidriv / Supadriv and Phillips recessversions.Type Order no.Size: PZ0 x 80 mm, length: 161 mm SZK PZ0 1206447Size: PZ1 x 80 mm, length: 161 mm SZK PZ1 1206450Size: PZ2 x 100 mm, length: 205 mm SZK PZ2 1206463Size: PH0 x 80 mm, length: 161 mm SZK PH0 1205147Size: PH1 x 80 mm, length: 161 mm SZK PH1 1205150Size: PH2 x 100 mm, length: 205 mm SZK PH2 1205163PhOENIX CONTACT2728 PhOENIX CONTACTSCREWFOX screwdriver toolsSocket wrench for hexagon head screwsSocket wrench for tightening hexagon head screws and nuts. Dual-component handles and handles with good grip ensure an optimum hold.TypeOrder no.Wrench size 5.5 mm SHN 5,5 1209855Wrench size 8.0 mm SHN 8 1209868Wrench size 13 mmSHN 13 1209923VDE socket wrench for hexagonal socket-head screwsWith easy-to-handle and wide T -form of the fully insulated hexagonal socket-head Allen wrench, high tightening torques can be achieved.TypeOrder no.Wrench size 5 mm VDE-ISS 5 1203343Wrench size 6 mm VDE-ISS 6 1201934Wrench size 8 mmVDE-ISS 8 1201947Control cabinet keyUniversal control cabinet key with the following closures:6 mm square ? 7 – 8 mm square ? 7 – 8 mm triangle ? 3 – 5 mm doubleType Order /doc/9332130676a20029bc642d82.html S 4 1203149Screwdriver setsType Order no.SZ SORTI 1 1202085SZ SORTI 2 1202098 DescriptionScrewdriver assortment Screwdriver assortment consisting of:consisting of:SZS 0,4X2,5 1205037SZS 1,0X4,0 1205066SZS 0,6X2,5 1205040SZS 1,0X6,5 1205079SZS 0,6X3,5 1205053SZG 0,9X6,51205134SZG 0,6X3,51205121SCREWFOX screwdriver toolsT orque screw driver with hexagonal fast connectionThe extremely accurate torque screwdrivers that can be set finely acoordingto EN ISO 6789 are tailored to PhoenixContact products with screw connection.– TSD-M 1,2NM 0.3 – 1.2 Nm– TSD-M 3NM 1.2 – 3.0 Nm– TSD-M 6NM 3.0 – 6.0 NmType Order no.TSD-M 1,2NM 1212224TSD-M 6NM 1212226Type Order no.TSD-M 3NM 1212225AccessoriesT ool bits for slotted-head screwsBlade: 0.5 x 3.0 mm, length: 50 mm, tough but flexible ASD BIT 0,5X3,0X50 1203961ASD BIT 0,5X3,0X50 1203961 Blade: 0.6 x 3.5 mm, length: 50 mm, tough but flexible ASD BIT 0,6X3,5X50 1203974ASD BIT 0,6X3,5X50 1203974 Blade: 0.6 x 3.5 mm, length: 70 mm, tough but flexible ASD BIT 0,6X3,5X70 1203987ASD BIT 0,6X3,5X70 1203987 Blade: 0.8 x 4.0 mm, length: 50 mm, tough but flexible ASD BIT 0,8X4,0X50 1203990ASD BIT 0,8X4,0X50 1203990More tool bitsBlade: 1.0 x 5.5 mm, length: 50 mm, tough but flexible ASD BIT 1,0X5,5X50 1204009ASD BIT 1,0X5,5X50 1204009see www.phoenixcontact.de/eshop Battery-powered torque screwdriverThe battery-powered screwdriver has thefollowing characteristics:Right/Left rotation2-gear transmission21-level coupling with drilling levels of upto 600 rpm6.5 mm hexagon fast connection drillchuckType Order no.ASD 21 1208526ASD 21 SET 120V 1208542ASD 21 SET 230V 1208490Description Adjustable from 0.3 – 4.4 Nm consisting of:Accuracy ± 5%Battery-powered torque screwdriverincluding power pack 1.2 Ah incl. power packCharger 120 V or 230 VBits and user manualAluminum caseAccessoriesT ool bits for slotted-head screwsBlade: 0.5 x 3.0 mm, length: 50 mm, tough but flexible ASD BIT 0,5X3,0X 50 1203961ASD BIT 0,5X3,0X 50 1203961 Blade: 0.6 x 3.5 mm, length: 50 mm, tough but flexible ASD BIT 0,6X3,5X 50 1203974ASD BIT 0,6X3,5X 50 1203974 Blade: 0.6 x 3.5 mm, length: 70 mm, tough but flexible ASD BIT 0,6X3,5X 70 1203987ASD BIT 0,6X3,5X 70 1203987 Blade: 0.8 x 4.0 mm, length: 50 mm, tough but flexible ASD BIT 0,8X4,0X 50 1203990ASD BIT 0,8X4,0X 50 1203990More tool bitsBlade: 1.0 x 5.5 mm, length: 50 mm, tough but flexible ASD BIT 1,0X5,5X 50 1204009ASD BIT 1,0X5,5X 50 1204009see www.phoenixcontact.de/eshop Hexagonal torque screwdriver with preset torqueThe preset 4 mm hexagonal torquescrewdrivers are suitable especially fortightening the pressure nuts and sensor /actuator cables of distributor boxes fromthe PLUSCON product range.Type Order no.Accessories: Nuts forBlade: 0.4 x 2.5 x 75 mm, 0.2 Nm TSD 02 SAC 1208487Cable, M8 plug connector SAC BIT M8-D10 1208461self assembled cable, M8 connector SACC BIT M8-D12 1208474 Blade: 0.6 x 3.5 x 100 mm, 0.4 Nm TSD 04 SAC 1208429Cable, M12 connector SAC BIT M12-D15 1208432Cable, M12 connector SACC BIT M12-D20 1208445 Blade: 0.8 x 4.0 x 100 mm, 2.0 Nm TSD 20 SAC 1212020Pressure nuts, wrench size 13 mm SAC BIT QUICKON-W13 1212033 Blade: 1.0 x 5.5 x 150 mm, 2.5 Nm TSD 25 SAC 1212315Pressure nuts, wrench size 24 mm SAC BIT HOOD-W24 1212486PhOENIX CONTACT29High-quality measuring tools are available with the TESTFOX multimeters, current pliers and voltage testers that are tested and approved as per the nationally and internationally applicable standards.They allow measurement of all standard measurement types and serve as the ideal solution in all fields of application, electrical installation and the service.Wide range of functionsThe TESTFOX M-1 offers all standard measurement types and temperature measurements in a compact housing.Versatile useThe TESTFOX CC-1 also allowsmeasurement of low AC/DC currentsabove 10 mA and is ideal in the area ofphotovoltaics.Measuring without errorsA load can be connected through twopushbuttons in order to rule out erroneousmeasurements due to reactive voltage.TESTFOXMeasuring and testing devices30PhOENIX CONTACTTESTFOX testing and measuring devicesThe DUSPOL EXPERT voltage andcontinuity tester has the following features:Single-pos. test of the phase conductor(phase)Measuring point lightingAcoustic and optical continuity testLoad connection using a pushbuttonVibration alarm for safe voltage detectionSurge voltage category CAT IV 500 V asper IEC/EN 61243-3Type Order no.PROFIPOL 1209101DUSPOL EXPERT 1209091Voltage range [V DC] 6 ... 40012 (750)Voltage range [V AC] 6 … 40012 … 690For further technical data, see Protection class IP65IP64www.phoenixcontact.de/eshopThe current pliers can be used in the caseof voltages of up to 600 V, category III.They combine the functions of a digitalmultimeter with those of current pliers ina compact and practical IP30 housing. Allmeasuring ranges are overload-protected.Type Order no.TESTFOX CC 1212210TESTFOX CC-1 1212211Display scope2000 digits4000 digitsDisplay accuracy1,0%0,5%Voltage AC0.1 mV – 600 V0.1 mV – 600 VVoltage DC0.1 mV – 600 V0.1 mV – 600 VCurrent AC0.1 A – 400 A10 mA – 300 ACurrent DC–10 mA – 300 AResistance0,1 Ω – 20 M Ω0,1 Ω – 40 M ΩFor further technical data, see Continuity test Acoustic (20 Ω)Acoustic (50 Ω)www.phoenixcontact.de/eshop The digital multimeters with volt sensorfunction are impressive due to theirtechnology and their quality. They are testedand approved as per the internationallyapplicable standards IEC/EN 61010. Thedevices can be used in the case of voltagesof up to 600 V, category III or 1000 V,category II.Type Order no.TESTFOX M 1212208TESTFOX M-1 1212209Display scope2000 digits2000 digitsDisplay accuracy0.5%0.5%Volt sensor yes yesVoltage AC0.1 mV – 750 V0.1 mV – 750 V。
DC-110R资料
Physical Specifications:
Case Material: Non-conductive plastic case Weight:er Derating Curve
2.1 1.8
Simplified Schematic Vin
Control
Po(W)
YCL
Specifications: At 25°C Input Specifications:
Input Voltage Range: ± 10% Input Filter: Internal Capacitor
General Specifications:
Isolation Voltage: 500Vdc Efficiency: see table Switching Frequency: 25KHz typical Isolation Resistance: 1000M ohm
Output Specifications:
Output Voltage & Current: see table Voltage Accuracy: +5 % max Line Regulation(at full load): ± 1% max Load Regulation (at full load to 1/4 load): ± 5% max Temperature Coefficient: + 0.05%/°C max Ripple & Noise(20Mhz BW): 1% p-p max Short Circuit Protection: Momentary
元器件交易网
1.8watt 24pins DIP/DIL package 100/200 series Feature: