ZXTEM322中文资料

合集下载

ZXTEM322TA;中文规格书,Datasheet资料

1S E M I C O N D U C T O R SSUMMARYNPN —-V CEO = 80V; R SAT =68m ; I C = 3.5A DESCRIPTIONPackaged in the new innovative 2mm x 2mm MLP (Micro Leaded Package)outline,these new 4th generation low saturation dual PNP transistors offer extremely low on state losses making them ideal for use in DC-DC circuits and various driving and power management functions.Additionally users gain several other key benefits :Performance capability equivalent to much larger packages Improved circuit efficiency & power levels PCB area and device placement savings Lower Package Height (0.9mm nom)Reduced component countFEATURES•Low Equivalent On Resistance•Extremely Low Saturation Voltage (185mV max @1A)•h FE specified up to 5A•I C =-3.5A Continuous Collector Current •2mm x 2mm MLPAPPLICATIONS•DC - DC Converters •DC - DC Modules •Power switches •Motor controlDEVICE MARKING•SEZXTEM322ISSUE 2 - JUNE 2006MPPS TM Miniature Package Power Solutions 80V NPN LOW SATURATION TRANSISTORDEVICE REEL SIZE TAPE WIDTH QUANTITY PER REELZXTEM322TA 7”8mm 3000ZXTEM322TC13”8mm10000ORDERING INFORMATIONMLP322ZXTEM322S E M I C O N D U C T O R SISSUE 2 - JUNE 20062PARAMETERSYMBOL VALUE UNIT Junction to Ambient (a)R ⍜JA 83ЊC/W Junction to Ambient (b)R ⍜JA 51ЊC/W Junction to Ambient (d)R ⍜JA 125ЊC/W Junction to Ambient (e)R ⍜JA42ЊC/WNOTES(a)For a single device surface mounted on 10sq cm 1oz copper on FR4 PCB, in still air conditions with all exposed pads attached .(b) For a single device surface mounted on 10sq cm 1oz copper on FR4 PCB, in still air conditions measured at t Յ5 secs with all exposed pads attached .(c) Repetitive rating - pulse width limited by max junction temperature. Refer to Transient Thermal Impedance graph.(d) For a single device surface mounted on 10 sq cm 1oz copper FR4 PCB, in still air conditions with minimal lead connections only.(e) For a single device surface mounted on 65 sq cm 2oz copper FR4 PCB, in still air conditions with all exposed pads attached .(f) The minimum copper dimensions required for mounting are no smaller than the exposed metal pads on the base of the device, as shown in the package dimensions data. The thermal resistance for a device mounted on 1.5mm thick FR4 board using minimum copper of 1oz weight and 1mm wide tracks is Rth= 300°C/W giving a power rating of Ptot=420mWTHERMAL RESISTANCEPARAMETERSYMBOL LIMIT UNIT Collector-Base Voltage V CBO 100V Collector-Emitter Voltage V CEO 80V Emitter-Base Voltage V EBO 7.5V Peak Pulse CurrentI CM 5A Continuous Collector Current (a)I C 3.5A Base CurrentI B 1000mA Power Dissipation at TA=25°C (a)Linear Derating FactorP D 1.512W mW/ЊC Power Dissipation at TA=25°C (b)Linear Derating FactorP D 2.4519.6W mW/ЊC Power Dissipation at TA=25°C (d)Linear Derating FactorP D 18W mW/ЊC Power Dissipation at TA=25°C (e)Linear Derating FactorP D 324W mW/ЊC Operating &Storage Temperature Range T j :T stg -55 to +150ЊC Junction TemperatureT j150ЊCABSOLUTE MAXIMUM RATINGSZXTEM322S E M I C O N D U C T O R SISSUE 2 - JUNE 20063ZXTEM322S E M I C O N D U C T O R SISSUE 2 - JUNE 2006 4PARAMETER SYMBOL MIN.TYP.MAX.UNIT CONDITIONS Collector-Base Breakdown Voltage V(BR)CBO100180V I C=100␮A Collector-Emitter Breakdown Voltage V(BR)CEO80110V I C=10mA* Emitter-Base Breakdown Voltage V(BR)EBO7.58.2V I E=100␮A Collector Cut-Off Current I CBO25nA V CB=80V Emitter Cut-Off Current I EBO25nA V EB=6V Collector Emitter Cut-Off Current I CES25nA V CE=65VCollector-Emitter Saturation Voltage V CE(sat)15451451602402060185200325mVmVmVmVmVI C=0.1A,I B=10mA*I C=0.5A,I B=50mA*I C=1A,I B=20mA*I C=1.5A,I B=50mA*I C=3.5A,I B=300mA*Base-Emitter Saturation Voltage V BE(sat) 1.09 1.175V I C=3.5A,I B=300mA* Base-Emitter Turn-On Voltage V BE(on)0.96 1.05V I C=3.5A,V CE=2V*Static Forward Current Transfer Ratio h FE2003001106020450450170903010900I C=10mA,V CE=2V*I C=200mA,V CE=2V*I C=1A,V CE=2V*I C=1.5A,V CE=2V*I C=3A,V CE=2V*I C=5A,V CE=2V*Transition Frequency f T100160MHz I C=50mA,V CE=10Vf=100MHzOutput Capacitance C obo11.518pF V CB=10A,f=1MHzTurn-On Time t(on)86ns VCC =10V,I C=1AI B1=I B2=25mA Turn-Off Time t(off)1128ns ELECTRICAL CHARACTERISTICS(at T amb= 25°C unless otherwise stated)*Measured under pulsed conditions. Pulse width=300␮s. Duty cycleՅ2%ZXTEM322S E M I C O N D U C T O R SISSUE 2 - JUNE 20065TYPICALCHARACTERISTICSZXTEM322S E M I C O N D U C T O R S6ISSUE 2 - JUNE 2006EuropeZetex GmbHStreitfeldstraße 19D-81673 München GermanyTelefon: (49) 89 45 49 49 0Fax: (49) 89 45 49 49 49europe.sales@AmericasZetex Inc700 Veterans Memorial Hwy Hauppauge, NY 11788USATelephone: (1) 631 360 2222Fax: (1) 631 360 8222usa.sales@Asia PacificZetex (Asia) Ltd3701-04Metroplaza Tower 1Hing Fong Road, Kwai Fong Hong KongTelephone: (852) 26100 611Fax: (852) 24250 494asia.sales@Corporate Headquarters Zetex Semiconductors plc Zetex Technology ParkChadderton, Oldham, OL9 9LL United KingdomTelephone (44) 161 622 4444Fax: (44) 161 622 4446hq@These offices are supported by agents and distributors in major countries world-wide.This publication is issued to provide outline information only which (unless agreed by the Company in writing)may not be used,applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned.The Company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service.For the latest product information,log on to ©Zetex Semiconductors plc 2006DIM Millimetres Inches DIM Millimetres Inches Min Max Min Max MinMaxMinMaxA 0.80 1.000.03150.0393e 0.65 REF 0.0255 REF A10.000.050.000.002E 2.00 BSC 0.0787 BSC A20.650.750.02550.0295E20.790.990.0310.039A30.150.250.00590.0098E40.480.680.01880.0267b 0.180.280.00700.0110L 0.200.450.00780.0177b10.170.300.00660.0118L20.125 MAX.0.005 REF D 2.00 BSC 0.0787 BSCr 0.075 BSC 0.0029 BSC D2 1.22 1.420.04800.0559⍜0Њ12Њ0Њ12ЊD40.560.760.02200.0299PACKAGE DIMENSIONSControlling dimensions are in millimetres. Approximate conversions are given in inches分销商库存信息: DIODESZXTEM322TA。

AXIS P3225-LVE Mk II 高清1080P outdoor # ready摄像头说明文

AXIS P3225-LVE Mk II is a streamlined,outdoor-ready dome that provides HDTV 1080p video.It features a varifocal lens and remote zoom and focus,which eliminates the need for hands-on tuning.Equipped with WDR –Forensic Capture to handle scenes with strong variations in light,technology for exceptional light sensitivity,as well as built-in IR illumination with OptimizedIR,this versatile camera provides outstanding video quality in any light conditions.It supports Axis Zipstream technology that reduces bandwidth and storage requirements.The vandal-resistant AXIS P3225-LVE Mk II is IK10rated.>HDTV 1080p video quality >Outdoor ready and IK10rated>Light ﬁnder and WDR –Forensic Capture >OptimizedIR illumination >Axis ZipstreamDatasheetAXIS P3225-LVE Mk II Network CameraFor Thailand ICT SpecificationStreamlined, outdoor-ready HDTV 1080p ﬁxed dome for any light conditionsLAXIS P3225-VE Mk II NetworkCameraCameraImage sensor Progressive scan RGB CMOS1/3”Lens Varifocal,3.0–10.5mm,F1.4Horizontal of view92°–34°Vertical of view50°–20°Remote focus and zoom,P-Iris control,IR correctedDay and night Automatically removable infrared-cutMinimum illumination HDTV1080p25/30fps with WDR-forensic capture and Color:0.16lux,F1.4B/W:0.03lux,F1.4,0lux with IR illumination onColor:0.1lux,F1.4B/W:0.01lux,F1.4,0lux with IR illumination onHDTV1080p50/60fps:Color:0.32lux,F1.4B/W:0.06lux,F1.4,0lux with IR illumination onShutter time1/66500s to1sCamera angleadjustmentPan±180°,tilt-5to+75°,rotation±95°VideoVideo compression H.264Baseline,Main and High(MPEG-4Part10/AVC) Motion JPEGResolutions1920x1080to160x90Frame rate With WDR:25/30fps with power line frequency50/60HzWithout WDR:50/60fps with power line frequency50/60Hz Video streaming Multiple,individually streams in H.264and Motion JPEGAxis Zipstream technology in H.264Controllable frame rate and bandwidth,VBR/MBR H.264Multi-viewstreaming2individually cropped out view areasPan/Tilt/Zoom Digital PTZ,Preset positionsImage settings Compression,Color,Brightness,Sharpness,Contrast,Localcontrast,White balance,Exposure control(including automaticgain control),Exposure zones,Fine tuning of behavior at lowlight,WDR-forensic capture:Up to120dB depending on scene,Text and image overlay,Mirroring of images,Privacy masksRotation:0°,90°,180°,270°,including Corridor Format NetworkSecurity Password protection,IP address HTTPS a encryption,IEEE802.1X a network access control,Digest authentication,Useraccess log,Centralized ManagementSupported protocols IPv4/v6,HTTP,HTTPS a,SSL/TLS a,QoS Layer3DiffServ,FTP, CIFS/SMB,SMTP,Bonjour,UPnP TM,SNMP v1/v2c/v3(MIB-II), DNS,DynDNS,NTP,RTSP,RTP,SFTP,TCP,UDP,IGMP,RTCP,ICMP, DHCP,ARP,SOCKS,SSHSystemintegrationApplication Programming Interface Open API for software integration,including VAPIX®and AXIS Camera Application Platform;at AXIS Video Hosting System(AVHS)with One-Click Connection ONVIF S and ONVIF G,at Analytics AXIS Video Motion Detection,active tampering alarmSupport for AXIS Camera Application Platform enablinginstallation of AXIS Cross Line Detection,AXISDigital Autotracking and third-party applications,see/acapEvent triggers Analytics,Edge storage eventsEvent actions File upload:FTP,SFTP,HTTP,HTTPS,network share and emailemail,HTTP,HTTPS,TCP and SNMP trapVideo recording to edge storagePre-and post-alarm video bufferingSend video clipOverlay textIR illumination on/offData streaming Event dataBuilt-ininstallation aidsRemote zoom,Remote focus,Pixel counter,OptimizedIR withadjustable IR illumination intensityGeneralCasing IP66-and NEMA4X-rated,IK10impact-resistant casing withdehumidifying membraneEncapsulated electronics and captive screwsColor:white NCS S1002-BFor repainting instructions of skin cover or casing and impact onwarranty,contact your Axis partner.Sustainability PVC freeMemory512MB RAM,256MB FlashPower Power over Ethernet IEEE802.3af/802.3at Type1Class3,max10.8W,typical7.3WConnectors RJ4510BASE-T/100BASE-TX PoEIR illumination OptimizedIR with power-long-life850nm IR LEDswith adjustable illumination intensity.Range of reach up to30m(100ft)depending on sceneStorage Support for microSD/microSDHC/microSDXC cardSD card encryptionSupport for recording to network-attached storage(NAS)For SD card and NAS recommendations see Operatingconditions-40°C to50°C(-40°F to122°F)Start-up:-30°C to50°C(-22°F to122°F)Humidity10to100%RH(condensing)Storageconditions-40°C to65°C(-40°F to149°F)Approvals EMCEN55022Class B,EN61000-6-1,EN61000-6-2,EN55024,EN50121-4,IEC62236-4,FCC Part15Subpart B Class A and B,ICES-003Class B,VCCI Class B,RCM AS/NZS CISPR22Class B,KCC KN22Class B,KN24SafetyIEC/EN/UL60950-1,IEC/EN/UL60950-22,IEC/EN62471EnvironmentIEC60068-2-1,IEC60068-2-2,IEC60068-2-14IEC60068-2-6(vibration),IEC60068-2-27(shock),IEC60068-2-30,IEC60068-2-78,IEC/EN60529IP66,NEMA250Type4X,IEC/EN62262IK10Dimensions Height:104mm(41/16in)ø149mm(57/8in)Weight800g(1.8lb)IncludedaccessoriesInstallation Guide,Windows decoder1-user license,Mountingbracket,Cable gasket,Resistorx T20L-key,Drill template,Connector guardOptionalaccessoriesAXIS ACI Conduit Bracket AAXIS ACI Conduit AdaptersAXIS T94M01L Recessed Mount KitAXIS T94T01D Pendant Kit including weather shieldAXIS MountsSmoked domeVideomanagementsoftwareAXIS Companion,AXIS Camera Station,Video managementsoftware from Axis’Application Development Partners availableon /support/downloadsLanguages English,German,French,Spanish,Italian,Russian,Chinese,Japanese,Korean,Portuguese,Traditional Chinese Warranty Axis3-year warranty and AXIS Extended Warranty option,see/warrantya.This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.(),and cryptographic software written by Eric Young(*****************).Environmental responsibility:/environmental-responsibility©2016-2017Axis Communications AB.AXIS COMMUNICATIONS,AXIS,and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions.All other company names and products are trademarks or registered trademarks of their respective companies.We reserve the right to introduce without notice.1 6 3 3 6 6 1 / E N / M 2 . 2 / 0 2 2 0 1 7*at shutter speed 1/12secAxis Communications AB ∙ Emdalavägen 14 ∙ 223 69 LUND ∙ Sweden ∙ Tel: +46 46 272 18 00 ∙ Fax: +46 46 13 61 30 E-mail:*************∙ ∙ Vat.No. SE 556253-614301Lund, December, 2016Regarding general tender specifications for Government projects in ThailandAt Axis Communications, we believe in a close cooperation with our partners and provide a full range of sales, marketing and technical support from our Headquarters in Sweden .Following the recently adopted requirements by local authorities, Axis submits this document in order to fulfill the specific needs of the market in Thailand.In regard to the level of minimum illumination needed to obtain images as according to Axis standard of image quality, we provide the following information for The Minimum illuminationThe following pages detail additional tests we have done with our cameras to provide minimum illuminations under different light conditions and shutter speeds.About Axis’ measurement of minimum illuminationAxis measures the minimum amount of illumination required by Axis network video products to produce images of a specified quality . The MMI (Measurement of Minimum Illumination ) method described in our technical note applies solely to camera blocks developed by Axis Communications AB . The Axis MMI method is based on the CEA -639 standard, “Consumer Camcorder or Video Camera Low Light Performance ”. For detailed information, see the AXIS technical note on the MMI method .References :AXIS Technical Note (MMI ): http ://www .axis .com /files /tech_notes /Axis_MMI .pdf AXIS whitepaper (The challenge of minimum illumination ):http ://www .axis .com /files /whitepaper /wp_light_sensitivity_41137_en_1011_lo .pdfAxis Communications AB Address Emdalavägen 14, 223 69 LUND, Sweden Phone +46 46 272 18 00 Fax +46 46 13 61 30 Test Environment and Result for P3225-V Mk II, P3225-VE Mk II, P3225-LV Mk II & P3225-LVE Mk II:From the test result above, we confirm that P3225-V Mk II, P3225-VE Mk II, P3225-LV Mk II & P3225-LVE Mk II can perform color mode at 0.1 Lux and B&W mode at 0.01 Lux.Best RegardsPeter FribergDirector Solution Management Axis Communications AB。

西门子PLC的SM322数字量输出模块的功能

（1）DO模板的功能
数字量输出模块SM322将S7-300内部信号电平转换成过程所要求的外部信号电平，可直接用于驱动电磁阀、接触器、小型电动机、灯和电动机启动器等。

（2）DO模板的类型
按负载回路使用的电源不同分为：
直流输出模块、交流输出模块和交直流两用输出模块。

按输出开关器件的种类不同分为：
晶体管输出方式、晶闸管输出方式和继电器触点输出方式。

（3）DI模板的特点
晶体管输出模块只能带直流负载，属于直流输出模块；
晶闸管输出方式属于交流输出模块；
继电器触点输出方式的模块属于交直流两用输出模块。

艾驰商城是国内最专业的MRO工业品网购平台，正品现货、优势价格、迅捷配送，是一站式采购的工业品商城！具有10年工业用品电子商务领域研究，以强大的信息通道建设的优势，以及依托线下贸易交易市场在工业用品行业上游供应链的整合能力，为广大的用户提供了传感器、图尔克传感器、变频器、断路器、继电器、PLC、工控机、仪器仪表、气缸、五金工具、伺服电机、劳保用品等一系列自动化的工控产品。

如需进一步了解台达PLC、西门子PLC、施耐德plc、欧姆龙PLC的选型，报价，采购，参数，图片，批发等信息，请关注艾驰商城/。

Hittite HMC322 数据手册

MICROWAVE CORPORATIONS W I T C H E S - C H I P7HMC322GaAs MMIC SP8T NON-REFLECTIVESWITCH, DC - 10.0 GHzv00.0303General DescriptionFeaturesFunctional Diagram The HMC322 is a broadband non-reﬂ ective GaAs MESFET SP8T switch chip. Covering DC to 10.0 GHz, this switch offers high isolation and low insertion loss and extends the frequency coverage of Hittite’s SP8T switch product line. This switch also includes an on board binary decoder circuit which reduces the required logic control lines to three. The switch operates using a negative control voltage of 0/-5V , and requires a ﬁ xed bias of -5V . All data is tested with the chip in a 50 Ohm test ﬁ xture connected via 0.025 mm (1 mil) diameter wire bonds of 0.5 mm (20 mils) length.Broadband Performance: DC - 10.0 GHz High Isolation: >38 dB@ 4 GHz Low Insertion Loss: 2.0 dB@ 4 GHz Integrated 3:8 TTL DecoderSmall Size: 1.45 mm x 1.6 mm x 0.10 mmElectrical Speciﬁ cations, T A = +25° C, With 0/-5V Control, Vee= -5V , 50 Ohm SystemTypical ApplicationsThe HMC322 is ideal for:• Telecom Infrastructure • Microwave Radio & VSAT • Military & Space • Test InstrumentationParameterFrequency Min.Typ.Max.Units Insertion LossDC - 2.0 GHzDC - 4.0 GHz DC - 6.0 GHz DC - 8.0 GHz DC - 10.0 GHz 1.92.02.12.22.4 2.32.42.52.62.8dB dB dB dB dB Isolation (RFC to RF1 - 8)DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz DC - 8.0 GHz DC - 10.0 GHz40322720184638322624dB dB dB dB dB Return Loss “On State”DC - 10.0 GHz 14dB Return Loss“Off State”DC - 10.0 GHz 11dB Input Power for 1 dB Compression0.5 - 10.0 GHz 1923dBm Input Third Order Intercept(T wo-T one Input Power = +7 dBm Each T one)0.5 - 10.0 GHz 3438dBmSwitching Characteristics tRISE, tFALL (10/90% RF)tON, tOFF (50% CTL to 10/90% RF)DC - 10.0 GHz50150ns ns查询HMC322供应商7S W I T C H E S - C H I PInput Third Order Intercept PointSWITCH, DC - 10.0 GHzReturn Loss0.1 and 1 dB Input Compression PointInsertion Loss vs. Temperature Isolation Between RFC and Output Ports-5-4-3-2-112345678910+25 C +85 C -55 CI N S E R T I O N L O S S (d B )FREQUENCY (GHz)-70-60-50-40-30-20-100012345678910RF1RF2RF3RF4RF5RF6RF7RF8I S O L A T I O N (d B )FREQUENCY (GHz)-25-20-15-10-5012345678910RFCRF1-8 ON RF1-8 OFFR E T U R N L O S S (d B )FREQUENCY (GHz)25303540455012345678910+25 C +85 C -55 CI N P U T T H I R D O R D E R I N T E R C E P T (d B m )FREQUENCY (GHz)182022242628123456789101.0 Compression Point 0.1dB Compression PointI N P U T C O M P R E S S I O N P O I N T (d B m )FREQUENCY (GHz)-70-60-50-40-30-20-100012345678910I S O L A T I O N (d B )FREQUENCY (GHz)Isolation Between Output Ports7SWITCH, DC - 10.0 GHzTruth TableBias Voltage & CurrentControl VoltagesAbsolute Maximum Ratings7S W I T C H E S - C H I PSWITCH, DC - 10.0 GHzOutline DrawingNOTES:1. DIMENSIONS IN INCHES [MILLIMETERS].2. DIE THICKNESS IS 0.004”.3. TYPICAL BOND P AD IS 0.004” SQUARE.4. TYPICAL BOND P AD SPACING IS 0.006” CENTER TO CENTER.5. BOND PAD MET ALLIZA TION: GOLD.6. BACKSIDE MET ALLIZA TION: GOLD.7. BACKSIDE MET AL IS GROUND.8.NO CONNECTION REQUIRED FOR UNLABELED GROUND BOND PADS.7SWITCH, DC - 10.0 GHzTTL Interface Circuit (Required for Each Control Input A, B and C)Note:Control inputs A, B, and C can be driven directly with TTL logic with -5 Volts applied to the HCT logic gates Vee pin and to the Vee pad of the RF Switch.Pad Descriptions7S W I T C H E S - C H I PSWITCH, DC - 10.0 GHzAssembly DiagramHandling PrecautionsFollow these precautions to avoid permanent damage.Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning systems.Static Sensitivity: Follow ESD precautions to protect against > ± 250V ESD strikes.Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize inductive pick-up.General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the chip has fragile air bridges and should not be touched with vacuum collet, tweezers, or ﬁ ngers.MountingThe chip is back-metallized and can be die mounted with electrically conductive epoxy. The mounting surface should be clean and ﬂ at.Epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy ﬁ llet is observed around the perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule.Wire BondingBall or wedge bond with 0.025mm (1 mil) diameter pure gold wire. Thermosonic wirebonding with a nominal stage temperature of 150 deg. C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use the minimum level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on the chip and terminated on the package orsubstrate. All bonds should be as short as possible <0.31mm (12 mils).。

MAX3232中文资料zhuanzai

MAX3222/MAX3232/MAX3237/MAX32413.0V至5.5V、低功耗、1Mbps、真RS-232收发器，使用四只0.1µF外部电容________________________________________________________________Maxim Integrated Products119-0273; Rev 7; 1/07MegaBaud和UCSP是Maxim Integrated Products, Inc.的商标。

本页已使用福昕阅读器进行编辑。

M A X 3222/M A X 3232/M A X 3237/M A X 32413.0V至5.5V、低功耗、1Mbps、真RS-232收发器，使用四只0.1µF外部电容2_______________________________________________________________________________________ABSOLUTE MAXIMUM RATINGSELECTRICAL CHARACTERISTICS(V CC = +3.0V to +5.5V, C1–C4 = 0.1µF (Note 2), T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.)Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.Note 1:V+ and V- can have a maximum magnitude of 7V, but their absolute difference cannot exceed 13V.V CC ...........................................................................-0.3V to +6V V+ (Note 1)...............................................................-0.3V to +7V V- (Note 1)................................................................+0.3V to -7V V+ + V- (Note 1)...................................................................+13V Input VoltagesT_IN, SHDN , EN ...................................................-0.3V to +6V MBAUD...................................................-0.3V to (V CC + 0.3V)R_IN.................................................................................±25V Output VoltagesT_OUT...........................................................................±13.2V R_OUT....................................................-0.3V to (V CC + 0.3V)Short-Circuit DurationT_OUT....................................................................ContinuousContinuous Power Dissipation (T A = +70°C)16-Pin TSSOP (derate 6.7mW/°C above +70°C).............533mW 16-Pin Narrow SO (derate 8.70mW/°C above +70°C)....696mW 16-Pin Wide SO (derate 9.52mW/°C above +70°C)........762mW 16-Pin Plastic DIP (derate 10.53mW/°C above +70°C)...842mW 18-Pin SO (derate 9.52mW/°C above +70°C)..............762mW 18-Pin Plastic DIP (derate 11.11mW/°C above +70°C)..889mW 20-Pin SSOP (derate 7.00mW/°C above +70°C).........559mW 20-Pin TSSOP (derate 8.0mW/°C above +70°C).............640mW 28-Pin TSSOP (derate 8.7mW/°C above +70°C).............696mW 28-Pin SSOP (derate 9.52mW/°C above +70°C).........762mW 28-Pin SO (derate 12.50mW/°C above +70°C).....................1W Operating Temperature RangesMAX32_ _C_ _.....................................................0°C to +70°C MAX32_ _E_ _ .................................................-40°C to +85°C Storage Temperature Range.............................-65°C to +150°C Lead Temperature (soldering, 10s).................................+300°CMAX3222/MAX3232/MAX3237/MAX32413.0V至5.5V、低功耗、1Mbps、真RS-232收发器，使用四只0.1µF外部电容_______________________________________________________________________________________3TIMING CHARACTERISTICS—MAX3222/MAX3232/MAX3241(V CC = +3.0V to +5.5V, C1–C4 = 0.1µF (Note 2), T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.)ELECTRICAL CHARACTERISTICS (continued)(V CC = +3.0V to +5.5V, C1–C4 = 0.1µF (Note 2), T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.)M A X 3222/M A X 3232/M A X 3237/M A X 32413.0V至5.5V、低功耗、1Mbps、真RS-232收发器，使用四只0.1µF外部电容4________________________________________________________________________________________________________________________________________________________________典型工作特性(V CC = +3.3V, 235kbps data rate, 0.1µF capacitors, all transmitters loaded with 3k Ω, T A = +25°C, unless otherwise noted.)-6-5-4-3-2-101234560MAX3222/MAX3232TRANSMITTER OUTPUT VOLTAGEvs. LOAD CAPACITANCELOAD CAPACITANCE (pF)T R A N S M I T T E R O U T P U T V O L T A G E (V )20003000100040005000246810121416182022150MAX3222/MAX3232SLEW RATEvs. LOAD CAPACITANCELOAD CAPACITANCE (pF)S L E W R A T E (V /µs )20003000100040005000510152025303540MAX3222/MAX3232SUPPLY CURRENT vs. LOAD CAPACITANCEWHEN TRANSMITTING DATALOAD CAPACITANCE (pF)S U P P L Y C U R R E N T (m A )20003000100040005000TIMING CHARACTERISTICS—MAX3237(V CC = +3.0V to +5.5V, C1–C4 = 0.1µF (Note 2), T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.)Note 2:MAX3222/MAX3232/MAX3241: C1–C4 = 0.1µF tested at 3.3V ±10%; C1 = 0.047µF, C2–C4 = 0.33µF tested at 5.0V ±10%.MAX3237: C1–C4 = 0.1µF tested at 3.3V ±5%; C1–C4 = 0.22µF tested at 3.3V ±10%; C1 = 0.047µF, C2–C4 = 0.33µF tested at 5.0V ±10%.Note 3:Transmitter input hysteresis is typically 250mV.MAX3222/MAX3232/MAX3237/MAX32413.0V至5.5V、低功耗、1Mbps、真RS-232收发器，使用四只0.1µF外部电容_______________________________________________________________________________________5-7.5-5.0-2.502.55.07.50MAX3241TRANSMITTER OUTPUT VOLTAGEvs. LOAD CAPACITANCELOAD CAPACITANCE (pF)T R A N S M I T T E R O U T P U T V O L T A G E (V )2000300010004000500046810121416182022240MAX3241SLEW RATEvs. LOAD CAPACITANCELOAD CAPACITANCE (pF)S L E W R A T E (V /µs )20003000100040005000510152025303545400MAX3241SUPPLY CURRENT vs. LOADCAPACITANCE WHEN TRANSMITTING DATALOAD CAPACITANCE (pF)S U P P L Y C U R R E N T (m A )20003000100040005000-7.5-5.0-2.502.55.07.50MAX3237TRANSMITTER OUTPUT VOLTAGE vs. LOAD CAPACITANCE (MBAUD = GND)LOAD CAPACITANCE (pF)T R A N S M I T T E R O U T P U T V O L T A G E (V )200030001000400050000102030504060700MAX3237SLEW RATE vs. LOAD CAPACITANCE(MBAUD = V CC )LOAD CAPACITANCE (pF)S L E W R A T E (V /µs )500100015002000-7.5-5.0-2.502.55.07.50MAX3237TRANSMITTER OUTPUT VOLTAGE vs. LOAD CAPACITANCE (MBAUD = V CC )LOAD CAPACITANCE (pF)T R A N S M I T T E R O U T P U T V O L T A G E (V )5001000150020001020304050600MAX3237SUPPLY CURRENT vs.LOAD CAPACITANCE (MBAUD = GND)LOAD CAPACITANCE (pF)S U P P L Y C U R R E N T (m A )200030001000400050000246810120MAX3237SLEW RATE vs. LOAD CAPACITANCE(MBAUD = GND)LOAD CAPACITANCE (pF)S L E W R A T E (V /µs )2000300010004000500010302040506070MAX3237SKEW vs. LOAD CAPACITANCE(t PLH - t PHL )LOAD CAPACITANCE (pF)1000150050020002500____________________________________________________________________典型工作特性(续)(V CC = +3.3V, 235kbps data rate, 0.1µF capacitors, all transmitters loaded with 3k Ω, T A = +25°C, unless otherwise noted.)M A X 3222/M A X 3232/M A X 3237/M A X 32413.0V至5.5V、低功耗、1Mbps、真RS-232收发器，使用四只0.1µF外部电容6_________________________________________________________________________________________________________________________________________________________________引脚说明MAX3222/MAX3232/MAX3237/MAX32413.0V至5.5V、低功耗、1Mbps、真RS-232收发器，使用四只0.1µF外部电容_______________________________________________________________________________________7_______________________________详细说明双电荷泵电压转换器MAX3222/MAX3232/MAX3237/MAX3241的内部电源由两路稳压型电荷泵组成，只要输入电压(V CC )在3.0V至5.5V范围以内，即可提供+5.5V (倍压电荷泵)和-5.5V (反相电荷泵)输出电压。

MAX320-MAX322中文资料

ELECTRICAL CHARACTERISTICS
(V+ = +5V ±10%, V- = -5V ±10%, VINH = 3.5V, VINL = 2.5V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER ANALOG SWITCH Analog Signal Range
For equivalent devices specified for single-supply operation, see the MAX323/MAX324/MAX325 data sheet. For quad versions of these switches, see the MAX391/MAX392/MAX393 data sheet.
Plastic DIP (derate 9.09mW/°C above +70°C) .............727mW Narrow SO (derate 5.88mW/°C above +70°C) .............471mW
µMAX (derate 4.10mW/°C above +70°C) .....................330mW CERDIP (derate 8.00mW/°C above +70°C) ..................640mW Operating Temperature Ranges MAX32_C_ _ ........................................................0°C to +70°C MAX32_E_ _......................................................-40°C to +85°C MAX32_MJA ...................................................-55°C to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10sec) .............................+300°C

AXIS P3224-LVE网络摄像头说明书

DatasheetAXIS P3224-LVE Network CameraOutdoor-ready and optimized for forensic video in HDTV720p AXIS P3224-LVE is an outdoor-ready,streamlined fixed dome providing HDTV720p video quality.It features a varifocal lens and remote zoom and focus,which eliminates the need for hands-on fine tuning.The day and night functionality, together with OptimizedIR and P-Iris control,ensure superb image quality in any lighting conditions.Axis’built-in IR solution,OptimizedIR,automatically adapts to the zoom level set at installation,ensuring an evenly illuminated image. WDR–Forensic Capture increases forensic usability by highlighting details in both dark and well lit areas.Zipstream lowers bandwidth and storage requirements.AXIS P3224-LVE is IK10-rated,making it resistant to vandalism.>HDTV720p video quality>Outdoor-ready and IK10-rated>Remote zoom and focus>WDR-Forensic Capture>OptimizedIR illumination>Axis’Zipstream technologyAXIS P3224-LVE Network Camera CameraImage sensor Progressive scan RGB CMOS1/2.8”Lens Varifocal,3.0–10.5mm,F1.4Horizontal angle of view92°–34°Vertical angle of view50°–20°Remote focus and zoom,P-Iris control,IR correctedDay and night Automatically removable infrared-cut filterMinimum illumination HDTV720p25/30fps with WDR-Forensic Capture: Color:0.25lux,F1.4B/W:0.05lux,F1.4,0lux with IR illumination on HDTV720p50/60fps:Color:0.5lux,F1.4B/W:0.1lux,F1.4,0lux with IR illumination onShutter time1/142850s to2sCamera angleadjustmentPan±180°,tilt-5to+75°,rotation±95°VideoVideo compression H.264Baseline,Main and High Profile(MPEG-4Part10/AVC) Motion JPEGResolutions1280x960to160x90Frame rate With WDR:25/30fps with power line frequency50/60HzWithout WDR:50/60fps with power line frequency50/60Hz Video streaming Multiple,individually configurable streams in H.264and Motion JPEGAxis'Zipstream technology in H.264Controllable frame rate and bandwidth,VBR/MBR H.264Multi-viewstreaming2individually cropped out view areasImage settings Compression,Color,Brightness,Sharpness,Contrast,Whitebalance,Exposure control(including automatic gain control),Exposure zones,Backlight compensation,Fine tuning of behaviorat low light,WDR-Forensic Capture:Up to120dB dependingon scene,Local contrast,Text and image overlay,Mirroring ofimages,Privacy masksRotation:0°,90°,180°,270°,including Corridor FormatPan/Tilt/Zoom Digital PTZNetworkSecurity Password protection,IP address filtering,HTTPS a encryption,IEEE802.1X a network access control,Digest authentication,Useraccess log,Centralized Certificate ManagementSupported protocols IPv4/v6,HTTP,HTTPS a,SSL/TLS a,QoS Layer3DiffServ,FTP, CIFS/SMB,SMTP,Bonjour,UPnP TM,SNMP v1/v2c/v3(MIB-II), DNS,DynDNS,NTP,RTSP,RTP,SFTP,TCP,UDP,IGMP,RTCP,ICMP, DHCP,ARP,SOCKS,SSHSystem integrationApplication Programming Interface Open API for software integration,including VAPIX®and AXIS Camera Application Platform;specifications at AXIS Video Hosting System(AVHS)with One-Click Connection ONVIF Profile S,specification at Analytics Video motion detection,Active tampering alarmSupport for AXIS Camera Application Platform enablinginstallation of AXIS Video Motion Detection3,AXIS Cross LineDetection,AXIS Digital Autotracking and third-party applications,see /acapEvent triggers Analytics,Edge storage eventsEvent actions File upload:FTP,SFTP,HTTP,HTTPS,network share and emailNotification:email,HTTP,HTTPS,TCP and SNMP trapVideo recording to edge storagePre-and post-alarm video bufferingSend video clipOverlay textIR illumination on/offData streaming Event dataBuilt-ininstallation aidsRemote zoom,Remote focus,Pixel counter,OptimizedIR withadjustable IR illumination angle and intensityGeneralCasing Aluminum inner camera module with encapsulated electronicsIP66-and NEMA4X-rated,IK10impact-resistant casing withdehumidifying membraneColor:white NCS S1002-BFor repainting instructions of skin cover or casing and impact onwarranty,contact your Axis partner.Memory512MB RAM,256MB FlashPower Power over Ethernet IEEE802.3af/802.3at Type1Class3,max10.8W,typical3.9WConnectors RJ4510BASE-T/100BASE-TX PoEIR illumination OptimizedIR with power-efficient,long-life850nm IR LEDs with adjustable angle of illumination and intensity.Range of reach upto25m(82ft)depending on sceneEdge storage Support for microSD/microSDHC/microSDXC cardSupport for recording to dedicated network-attached storage(NAS)For SD card and NAS recommendations see Operatingconditions-30°C to50°C(-22°F to122°F)Humidity10to100%RH(condensing)Storageconditions-40°C to65°C(-40°F to149°F)Approvals EN55022Class B,EN61000-6-1,EN61000-6-2,EN55024,EN50121-4,IEC62236-4,FCC Part15Subpart B Class A and B,ICES-003Class B,VCCI Class B,C-tick AS/NZS CISPR22Class B,KCC KN22Class B,KN24IEC/EN/UL60950-1,IEC/EN/UL60950-22,IEC/EN62471IEC60068-2-1,IEC60068-2-2,IEC60068-2-14IEC60068-2-6(vibration),IEC60068-2-27(shock),IEC60068-2-30,IEC60068-2-78,IEC/EN60529IP66,NEMA250Type4X,IEC/EN62262IK10Dimensions Height:104mm(41/16in)ø149mm(57/8in)Weight770g(1.7lb)IncludedaccessoriesInstallation Guide,Windows decoder1-user license,Mountingbracket,Cable gasket,Resistorx T20L-key,Drill template OptionalaccessoriesAXIS ACI Conduit Bracket AAXIS ACI Conduit AdaptersAXIS T94M01L Recessed Mount KitAXIS T94T01D Pendant Kit including weather shieldAXIS T91MountsAXIS T98A17-VE Surveillance CabinetVideomanagementsoftwareAXIS Camera Companion,AXIS Camera Station,Videomanagement software from Axis’Application DevelopmentPartners available on /techsup/software Warranty Axis3-year warranty and AXIS Extended Warranty option,see/warrantya.This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.(),and cryptographic software written by Eric Young(*****************).More information is available at ©2015Axis Communications AB.AXIS COMMUNICATIONS,AXIS,ETRAX,ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions.All other company names and products are trademarks or registered trademarks of their respective companies.We reserve the right to introduce modifications without notice.1 4 9 9 9 6 7 / E N / M 3 . 2 / 0 8 2 0 1 5。

西门子S7-300数字输出SM322数据表说明书

Changes preserved © Copyright Siemens AG
Hale Waihona Puke Yes 4 Yes; Optocoupler
75 V DC/60 V AC
6ES7322-1BF01-0AA0 Page 2/3
18.02.2016
Changes preserved © Copyright Siemens AG
Isolation Isolation tested with
Connection method required front connector
Data sheet
6ES7322-1BF01-0AA0
SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 8 DO, 24V DC, 2A, 1 X 20 PIN
Supply voltage Load voltage L+ ● Rated value (DC) ● permissible range, lower limit (DC) ● permissible range, upper limit (DC)
Permissible potential difference between different circuits
4 kΩ
L+ (-0.8 V)
2A 5 mA 0.5 mA
100 Hz 0.5 Hz 10 Hz
4A 4A
4A
1 000 m 600 m
No
No
No No No No
No No Yes; per channel
Potential separation Potential separation digital outputs ● between the channels ● between the channels, in groups of ● between the channels and backplane bus

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

1S E M I C O N D U C T O R SSUMMARYNPN —-V CEO = 80V; R SAT =68m ; I C = 3.5A DESCRIPTIONPackaged in the new innovative 2mm x 2mm MLP (Micro Leaded Package)outline,these new 4th generation low saturation dual PNP transistors offer extremely low on state losses making them ideal for use in DC-DC circuits and various driving and power management functions.Additionally users gain several other key benefits :Performance capability equivalent to much larger packages Improved circuit efficiency & power levels PCB area and device placement savings Lower Package Height (0.9mm nom)Reduced component countFEATURES•Low Equivalent On Resistance•Extremely Low Saturation Voltage (185mV max @1A)•h FE specified up to 5A•I C =-3.5A Continuous Collector Current •2mm x 2mm MLPAPPLICATIONS•DC - DC Converters •DC - DC Modules •Power switches •Motor controlDEVICE MARKING•SEZXTEM322ISSUE 1 - JUNE 2003MPPS TM Miniature Package Power Solutions 80V NPN LOW SATURATION TRANSISTORDEVICE REEL SIZE TAPE WIDTH QUANTITY PER REELZXTEM322TA 7”8mm 3000ZXTEM322TC13”8mm10000ORDERING INFORMATIONMLP322ZXTEM322S E M I C O N D U C T O R SISSUE 1 - JUNE 20032PARAMETERSYMBOL VALUE UNIT Junction to Ambient (a)R ⍜JA 83ЊC/W Junction to Ambient (b)R ⍜JA 51ЊC/W Junction to Ambient (d)R ⍜JA 125ЊC/W Junction to Ambient (e)R ⍜JA42ЊC/WNOTES(a)For a single device surface mounted on 10sq cm 1oz copper on FR4 PCB, in still air conditions with all exposed pads attached .(b) For a single device surface mounted on 10sq cm 1oz copper on FR4 PCB, in still air conditions measured at t Յ5 secs with all exposed pads attached .(c) Repetitive rating - pulse width limited by max junction temperature. Refer to Transient Thermal Impedance graph.(d) For a single device surface mounted on 10 sq cm 1oz copper FR4 PCB, in still air conditions with minimal lead connections only.(e) For a single device surface mounted on 65 sq cm 2oz copper FR4 PCB, in still air conditions with all exposed pads attached .(f) The minimum copper dimensions required for mounting are no smaller than the exposed metal pads on the base of the device, as shown in the package dimensions data. The thermal resistance for a device mounted on 1.5mm thick FR4 board using minimum copper of 1oz weight and 1mm wide tracks is Rth= 300°C/W giving a power rating of Ptot=420mWTHERMAL RESISTANCEPARAMETERSYMBOL LIMIT UNIT Collector-Base Voltage V CBO 100V Collector-Emitter Voltage V CEO 80V Emitter-Base Voltage V EBO 7.5V Peak Pulse CurrentI CM 5A Continuous Collector Current (a)I C 3.5A Base CurrentI B 1000mA Power Dissipation at TA=25°C (a)Linear Derating FactorP D 1.512W mW/ЊC Power Dissipation at TA=25°C (b)Linear Derating FactorP D 2.4519.6W mW/ЊC Power Dissipation at TA=25°C (d)Linear Derating FactorP D 18W mW/ЊC Power Dissipation at TA=25°C (e)Linear Derating FactorP D 324W mW/ЊC Operating &Storage Temperature Range T j :T stg -55 to +150ЊC Junction TemperatureT j150ЊCABSOLUTE MAXIMUM RATINGSZXTEM322S E M I C O N D U C T O R SISSUE 1 - JUNE 20033ZXTEM322S E M I C O N D U C T O R SISSUE 1 - JUNE 2003 4PARAMETER SYMBOL MIN.TYP.MAX.UNIT CONDITIONS Collector-Base Breakdown Voltage V(BR)CBO100180V I C=100␮A Collector-Emitter Breakdown Voltage V(BR)CEO80110V I C=10mA* Emitter-Base Breakdown Voltage V(BR)EBO7.58.2V I E=100␮A Collector Cut-Off Current I CBO25nA V CB=80V Emitter Cut-Off Current I EBO25nA V EB=6V Collector Emitter Cut-Off Current I CES25nA V CE=65VCollector-Emitter Saturation Voltage V CE(sat)15451451602402060185200325mVmVmVmVmVI C=0.1A,I B=10mA*I C=0.5A,I B=50mA*I C=1A,I B=20mA*I C=1.5A,I B=50mA*I C=3.5A,I B=300mA*Base-Emitter Saturation Voltage V BE(sat) 1.09 1.175V I C=3.5A,I B=300mA* Base-Emitter Turn-On Voltage V BE(on)0.96 1.05V I C=3.5A,V CE=2V*Static Forward Current Transfer Ratio h FE2003001106020450450170903010900I C=10mA,V CE=2V*I C=200mA,V CE=2V*I C=1A,V CE=2V*I C=1.5A,V CE=2V*I C=3A,V CE=2V*I C=5A,V CE=2V*Transition Frequency f T100160MHz I C=50mA,V CE=10Vf=100MHzOutput Capacitance C obo11.518pF V CB=10A,f=1MHzTurn-On Time t(on)86ns VCC =10V,I C=1AI B1=I B2=25mA Turn-Off Time t(off)1128ns ELECTRICAL CHARACTERISTICS(at T amb= 25°C unless otherwise stated)*Measured under pulsed conditions. Pulse width=300␮s. Duty cycleՅ2%ZXTEM322S E M I C O N D U C T O R SISSUE 1 - JUNE 20035ZXTEM322S E M I C O N D U C T O R S6ISSUE 1 - JUNE 2003EuropeZetex plcFields New Road ChaddertonOldham, OL9 8NP United KingdomTelephone (44) 161 622 4444Fax: (44) 161 622 4446hq@Zetex GmbHStreitfeldstraße 19D-81673 München GermanyTelefon: (49) 89 45 49 49 0Fax: (49) 89 45 49 49 49europe.sales@AmericasZetex Inc700 Veterans Memorial Hwy Hauppauge, NY 11788USATelephone: (1) 631 360 2222Fax: (1) 631 360 8222usa.sales@Asia PacificZetex (Asia) Ltd3701-04Metroplaza Tower 1Hing Fong Road Kwai Fong Hong KongTelephone: (852) 26100 611Fax: (852) 24250 494asia.sales@These offices are supported by agents and distributors in major countries world-wide.This publication is issued to provide outline information only which (unless agreed by the Company in writing)may not be used,applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned.The Company reserves the right to alter without notice the specification,design,price or conditions of supply of any product or service.For the latest product information,log on to©Zetex plc 2003DIM Millimetres Inches DIM Millimetres Inches Min Max Min Max MinMaxMinMaxA 0.80 1.000.03150.0393e 0.65 REF 0.0255 REF A10.000.050.000.002E 2.00 BSC 0.0787 BSC A20.650.750.02550.0295E20.790.990.0310.039A30.150.250.00590.0098E40.480.680.01880.0267b 0.180.280.00700.0110L 0.200.450.00780.0177b10.170.300.00660.0118L20.125 MAX.0.005 REF D 2.00 BSC 0.0787 BSCr 0.075 BSC 0.0029 BSC D2 1.22 1.420.04800.0559⍜0Њ12Њ0Њ12ЊD40.560.760.02200.0299PACKAGE DIMENSIONSControlling dimensions are in millimetres. Approximate conversions are given in inches。