SGSRoHS测试报告模板
sgs测试报告
sgs测试报告
SGS测试报告。
一、测试目的。
本次测试旨在对产品进行全面的SGS测试，以验证其符合相关标准和规定，确保产品质量和安全性。
二、测试内容。
1. 化学成分测试，对产品的化学成分进行分析，确保不含有有害物质。
2. 物理性能测试，测试产品的强度、耐磨性、耐温性等物理性能指标。
3. 环境适应性测试，测试产品在不同环境条件下的适应性和稳定性。
4. 安全性能测试，测试产品在正常使用情况下的安全性能，包括电气安全、防火性能等。
三、测试结果。
1. 化学成分测试结果显示，产品化学成分符合相关标准，不含有有害物质，符合安全使用要求。
2. 物理性能测试结果显示，产品具有较高的强度和耐磨性，能够满足正常使用需求。
3. 环境适应性测试结果显示，产品在不同环境条件下表现稳定，适应性良好。
4. 安全性能测试结果显示，产品在电气安全和防火性能方面均符合相关标准，使用安全可靠。
四、结论。
根据SGS测试结果，产品在化学成分、物理性能、环境适应性和安全性能方面均符合相关标准和规定，能够满足用户的使用需求，具有较高的质量和安全性。
五、建议。
1. 针对测试中发现的小问题，建议及时进行改进和优化，以进一步提升产品质量和性能。
2. 建议定期进行类似的SGS测试，以确保产品始终符合相关标准和规定，保障用户权益和产品质量。
六、附录。
1. SGS测试报告原件。
2. 测试样品照片。
以上为本次SGS测试报告内容，如有任何疑问或需要进一步了解，请随时与我们联系。
SGS测试报告解读
SGS-ROHS 报告解读由于欧盟指令2002/95/EC的重订指令2011/65/EU附录H的实施，最近很多客户来咨询，怎么才能看懂新版的ROHS 报告，特此我们制作这篇ROHS 报告解读，希望给大家带来帮助。
1. 报告编号2. 公司名称3. 申请公司地址4. The following sample(s) was/were submitted and identified on behalf of the clients as ：——以下测试之样品是由申请者所提供及确认：样品名称5.SGS Job No. ：——SGS 工作编号6. Tested Sample Info. ：——测试样品信息7. Client Ref. Info. ：——客户参考信息8. Date of Sample Received ：——样品接收日期9. Testing Period ：——测试周期10. Test Requested ：——测试要求：Selected test(s) as requested by client. ——根据客户要求测试11. Test Method ：——测试方法：Please refer to next page(s). ——请参见下一页12. Test Results ：——测试结果：Please refer to next page(s). ——请参见下一页13. Conclusion ：——结论Based on the performed tests on selected part of submitted sample(s), the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE) comply with the limits in RoHS Directive 2011/65/EU Annex II;recasting 2002/95/EC.基于所送样品进行的测试，镉、铅、汞、六价铬、多溴联苯( PBB )、多溴二苯醚( PBDE )的测试结果符合欧盟RoHS指令2002/95/EC的重订指令2011/65/EU附录H的限值要求14. Approved Signatory ——SGS 批准签署人签名15. Test Part Description ：——样品部件外观描述Specimen No. ：——样品编号SGS Sample ID. ：——SGS 样品报告编号16. Description ：——样品描述17. Remarks: ——备注(1) 1 mg/kg=1 ppm =0.0001%(2) MDL = Method Detection Limit. ——仪器检测极限值，低于此数据检测不出来，结果体现ND(3) ND = Not Detected (v MDL )――未检岀，低于仪器检测极限值，检测不岀来，结果体现ND(4) -“” Not Regulated. ―未―规定18. RoHS Directive 2011/65/EU ―― RoHS 指令2011/65/EUTest Method: ―― 测试方法：With reference to IEC 62321 ：2008 ―― 参考IEC 62321 2008(1) Determination of Cadmium by ICP-OES. ―― 用ICP-OES 测定镉的含量(2) Determination of Lead by ICP-OES. ――用ICP-OES 测定铅的含量(3) Determination of Mercury by ICP-OES. ――用ICP-OES 测定汞的含量(4) Determination of Hexavalent Chromium by Colorimetric Method using UV-Vis. ―用此外-可见分光光度计比色法测定六价铬的含量(5) Determination of PBBs / PBDEs content by GC-MS. ――用GC-MS 测定多溴联苯( PBB )和多溴二苯醚( PBDE )的含量19、20.21.Notes : -------- 备注(1)The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II——最大允许极限值引用自指令2011/65/EU 附录H(2)The result(s) shown is/are of the total weight of wet sample. 量中的含——所示结果为湿样品总重量22、23 RoHS Testing Flow Chart. ——RoHS 测试流程图24.ample photo: ——样品图片25.SGS authenticate the photo on original report only *** End of Report *** ——此照片仅限于随SGS 正本报告使用*** 报告完***一种常见的全氟化学品是全氟辛酸（PFOA）Perfluorooctanesulfonates-PFOS ）Perfluorooctanesulfonates-PFOS ）是一类高氟化合物，有良好的耐热性与环境破坏性，还可耐水耐油，另一种常见的全氟化学品是全氟辛酸（PFOA以及其盐。
SGS RoHS测试报告模板
SGS RoHS测试报告模板No. CANEC13 Date: 12 May 2013Page1 of 5Test ReportCo.,LTD.SHANGMEILIN District .ShenzhenThe following sample(s) was/were submitted and identified on behalf of the clients as : SGS Job No :CP13- - GZDate of Sample 09 May 2013Received :09 May 2013 - 12 May 2013Testing Period :Selected test(s) as requested by clientTest Requested :Please refer to next page(s)Test Method :Please refer to next page(s)Test Results :Based on the performed tests on submitted samples, the results of Lead, Conclusion :Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB),Polybrominated diphenyl ethers (PBDE) comply with the limits as set by RoHSDirective 2011/65/EU Annex II; recasting 2002/95/ECSigned for and on behalf ofSGS-CSTC Ltd.MErry LvApproved SignatoryNo. CANEC13 Date: 12 May 2013Page 2 of 5Test Report Test Results :Test Part Description :Specimen No.SGS Sample IDDescription1CAN13- Green fluidRemarks :(1) 1 mg/kg = 1 ppm = 0.0001%(2) MDL = Method Detection Limit(3) ND = Not Detected ( < MDL )(4) "-" = Not RegulatedRoHS Directive 2011/65/EUTest Method :With reference to IEC 62321:2008:(1) Determination of Cadmium by ICP-OES.(2) Determination of Lead by ICP-OES.(3) Determination of Mercury by ICP-OES.(4) Determination of Hexavalent Chromium by Colorimetric Methodusing UV-Vis.(5) Determination of PBBs / PBDEs content by GC-MS.Test Item(s)LimitUnitMDL002Cadmium (Cd)100 mg/kg2 ND Lead (Pb)1,000 mg/kg2 ND Mercury (Hg)1,000 mg/kg2 ND Hexavalent Chromium (CrVI)1,000 mg/kg2 ND Sum of PBBs1,000 mg/kg- ND Monobromobiphenyl- mg/kg5 ND Dibromobiphenyl- mg/kg5 ND Tribromobiphenyl- mg/kg5 ND Tetrabromobiphenyl- mg/kg5 ND Pentabromobiphenyl- mg/kg5 ND Hexabromobiphenyl- mg/kg5 ND Heptabromobiphenyl- mg/kg5 ND - mg/kg5 ND OctabromobiphenylNonabromobiphenyl - mg/kg5 ND Decabromobiphenyl- 5 mg/kgND Sum of PBDEs 1,000 mg/kg- ND Monobromodiphenyl ether- mg/kg5 NDNo. CANEC13 Date: 12 May 2013Page 3 of 5Test Report002Test Item(s)LimitUnitMDL5 ND Dibromodiphenyl ether- mg/kgTribromodiphenyl ether- mg/kg5 ND Tetrabromodiphenyl ether- mg/kg5 ND5 Pentabromodiphenyl ether- mg/kgND5 ND Hexabromodiphenyl ether- mg/kgHeptabromodiphenyl ether- mg/kg5 ND Octabromodiphenyl ether- mg/kg5 ND Nonabromodiphenyl ether- mg/kg5 ND Decabromodiphenyl ether- mg/kg5 NDNotes :(1) The maximum permissible limit is quoted from the directive2011/65/EU, Annex IINote: the results shown for the content of total weight in wet sample. .No. CANEC13 Date: 12 May 2013Page 4 of 5Test ReportATTACHMENTSRoHS Testing Flow Chart1) Name of the person who made testing,Michael Tso / Cutey Yu / Dayi Zhan 2) Name of the person in charge of testing,Adams Yu / Yolanda Wei3) These samples were dissolved totally by pre -conditioning method according to below flow chart(Cr6+ and PBBs/PBDEs test method excluded).Sample PreparationNo. CANEC13 Date: 12 May 2013Page 5 of 5Test Report Sample photo:CANEC13CAN13-SGS authenticate the photo on original report only *** End of Report ***。
RoHS检验报告
FGQ-IV-08-8.3-08版本：A/0
产品型号：厂商型号：厂商批次：供应商批次：ERP进货单号：
生产日期：进货数量：送样部门：
检测日期：
1.检验部门尽量采集跟前期的检测数据，特别是经第三方检测确认过的批次的检测数据进行对比，或根据情况增加测试点的方式在检验环节做出风险确认；如果无法断定，请填写完整的检测数据和确认意见经部门领导批准签字后同时发给计划部，物料认证组和供管组；
2.计划部、物料认证组、供管组和预检四部门各委派一名成员组成RoHS检测（疑似）决议小组，预检成员要确保严格按RoHS同质材料的要求拆分检测，计划部成员准备其相关的产品的市场要求等信息，物料认证组成员要准备供应商提供的RoHS资料和前期的相关检测数据，供管组成员准备供应商的PCN协议、RoHS赔偿协议和承诺书等相关信息，于4小时的工作时之内共同给出当天的疑似物料的处理意见反馈给预检（特殊情况须向领导请示的除外）。
3.经决议需送第三方检测的，由物料认证组负责送检，供管组负责跟供应商协商付款过请款。
4.研发采购的物料RoHS检测的疑似情况由研发的RoHS评议小组进行判定，需送第三方检测的由物料认证组送检和请款。
注：本报告原始测试数据可见附件。
RoHS检验报告
样品名称：生产商/供应商：ERP品号：取样数量：
年 月 日
增加测试点的方给计划部，物料保严格按RoHS同的RoHS资料和前之内共同给出当
和请款。
PA66 ROHS无卤 sgs 报告 环保报告
Test Report
报告编号 :RLSZC000679320001 Report No.:RLSZC000679320001
第1页 共6页 Page 1 of 6
申请单位 Applicant 地址 Address
:东莞利冠塑胶制品有限公司 :DONGGUAN LIGUANG PLASTIC PRODUCTS CO.,LTD :东莞市塘厦镇128工业区 :128# INDUSTRIAL AREA TANGXIA DONGGUAN
Test Report
报告编号 :RLSZC000679320001 Report No.:RLSZC000679320001 检测结果 Test Result(s):
第3页 共6页 Page 3 of 6
测试项目 Tested Item(s)
含量 Content
多溴联苯 Polybrominated Biphenyls(PBBs)
称量样品于套管中 Weigh sample and place
it in a thimble
用有机溶液萃取 Extracted with organic solvent
浓缩萃取液 Concentrate the extract
用 GC-MS 分析 Analyzed by GC-MS
用有机溶剂定容 Make up with organic solvent
含量 Content N.D. N.D. N.D. N.D.
测试项目 Tested Item(s) 卤素 Halogens 氟 Fluorine (F) 氯 Chlorine (Cl) 溴 Bromine (Br) 碘 Iodine (I)
含量 Content
N.D. N.D. N.D. N.D.
SGS测试报告整合
ROHS整合认证流程如果您是整机厂或是成品厂，您的所有部件的原材料都有相应的ROHS检测报告，您可以按整合报告服务申请流程来申请！产品整合报告服务流程以下为产品整合报告服务申请注意事项：一、前提：组成产品的零部件（单一材质）均已经做过测试（参照客户提供的清单）和未进行测试部分测试完成后进行。
二、客户需提供的材料：1、成品样品两个，用于核对报告。
2、清单上所有的测试报告复印件（字迹清楚，国家认可的认证机构出具的一年内的报告，超过一年无效，需重测）加盖整合测试申请公司的公章，并加盖公章，一致性声明等证明材料。
3、完整填写的整合测试申请表及保证书，注明出报告种类（中文或英文），并提供报告上相应的中英文。
4、材料清单（BOM）。
5、成品的结构简单剖视图（建议提供，以便核对）。
6、提供产品测试报告一览表。
备注：客户提供的所有报告经过整理后，送至实验室进行整合，如发现有虚假报告，实验室则终止一切审核工作。
客户须重新提供相应样品付费测试相关数据，待结果测出后，成品报告的审核工作再次启动。
报告所需审核时间此时开始重新计算。
如客户不愿意测试，实验室则退回所有的资料，不再予以整合。
以上整合报告为SET实验室签发的报告！ROHS认证2003年2月，欧盟议会和欧盟理事会以2002／95／EC号文正式公布：要求从2006年7月1日起进入欧盟的电气电子产品都应符合欧盟有毒有害物质禁用指令（Restriction of Hazardous Substances，简称RoHS）。
此指令主要是对产品中的铅、汞、镉、六价铬、多溴联苯及多溴联苯醚含量进行限制。
目前，多种电气电子产品都含有这六种有毒有害物质。
如果不提前采取有效的措施，到时会使企业“束手无策”，还会使企业蒙受较大的经济损失。
为帮助企业应对欧盟“限制有毒有害物质使用的指令”，中国RoHS认证咨询中心推出［RoHS］认证，该认证旨在帮助企业有效控制产品中有毒有害物质的限量。
SGS ROHS钉线报告
Test Report No.: GZ1001005831/CHEM Date: JAN 22, 2010 Page 1 of 7 (SVHC)TIAN JIN PENG YUN METALWORK CO., LTDZHANG ZHUANG ZI VILLAGE LIANG TOU TOWN JINGHAI COUNTY TIAN JIN CITY CHINAThe following sample(s) was/were submitted and identified on behalf of the applicant as 钉线SGS Job No. : SZ12352407Client Reference Information : 16#18#Date of Sample Received : JAN 18, 2010Testing Period : JAN 18, 2010 TO JAN 22, 2010Test Requested : Fifteen (15) Substances of Very High Concern (SVHC) screeningBased on the SVHC candidate list published by European Chemicals Agency (ECHA) on 2008October 28, regarding Regulation (EC) No 1907/2006 concerning REACH.Test Result(s) : Please refer to next page(s).Summary : According to the specified scope and analytical technique, concentrations of all 15 SVHC are<0.1% in the submitted sample(s).Signed for and on behalf ofSGS-CSTC Ltd.______________________David ZhouSr. EngineerTest Report No.: GZ1001005831/CHEM Date: JAN 22, 2010 Page 2 of 7 (SVHC)Test Sample:Sample Description: Copper-colored metal wireSample as received are classified as below categories :DescriptionPolymers : (i.e. PVC, PET, ABS , Rubber)Metals : (i.e. Alloy, Stainless, Aluminium)PCBA / Composite : (i.e. PCB, IC)Non-Metal and Non-Polymers : (i.e. Textile, Paper, Leather, Wood)Glass / CeramicOthers : (i.e. Chemical Substance or Preparation, Desiccant, Carbon/Ink in Cartridge)Remark:1. Definition of classification is listed in Appendix A of this report in accordance with 67/548/EEC and Regulation (EC)No 1907/2006.Test Method:SGS In-House method- RSTS-EE-SVHC-002, Analyzed by ICP/AES, GC/MS and GC/ECD.Remarks:1. The chemical analysis of 15 SVHC is performed by means of currently available analytical techniques againstthe SVHC candidate list published by ECHA on 2008 October 28, and shall refer tohttp://echa.europa.eu/chem_data/candidate_list_table_en.asp. This list is under evaluation by ECHA and may subject to change in the future.2. In accordance with Regulation (EC) No 1907/2006, any producer or importer of articles shall notify ECHA, inaccordance with paragraph 4 of Article 7, if a substance meets the criteria in Article 57 and is identified in accordance with Article 59(1) of the Regulation, if (a) the substance is present in those articles in quantities totaling over one tonne per producer or importer per year; and (b) the substance is present in those articles above a concentration of 0.1% weight by weight (w/w).3. Article 33 of Regulation (EC) No 1907/2006 requires supplier of an article containing a substance meeting thecriteria in Article 57 and identified in accordance with Article 59(1) in a concentration above0.1% weight by weight (w/w) shall provide the recipient of the article with sufficient information, available to the supplier, to allow safe use of the article including, as a minimum, the name of that substance.4. If a SVHC is found over the reporting limit, client is suggested to identify the component which contains theSVHC and the exact concentration of the SVHC by requesting further quantitative analysis from the laboratory.Test ReportNo.: GZ1001005831/CHEMDate: JAN 22, 2010Page 3 of 7(SVHC)Test Result:Substance NameCAS number EC number Concentration(%)Reporting Limit (%) ClassificationAlkanes, C10-13, chloro (Short Chain ChlorinatedParaffins)85535-84-8 287-476-5 ND 0.01 PBT Anthracene120-12-7 204-371-1 ND 0.005 PBT 5-tert-butyl-2,4,6-trinitro-m-xylene (musk xylene) 81-15-2 201-329-4 ND 0.005 vPvB Dibutyl phthalate (DBP) 84-74-2 201-557-4 ND 0.005 Toxic to Reproduction Category 2 4,4-Diaminodiphenylmethane(MDA) 101-77-9 202-974-4 ND 0.005 Carcinogen Category 2 Benzyl butyl phthalate (BBP) 85-68-7 201-622-7 ND 0.005 Toxic to Reproduction Category 2 Bis (2-ethylhexylphthalate)(DEHP) 117-81-7 204-211-0 ND0.005Toxic to Reproduction Category 2Hexabromocyclododecane (HBCDD) and all major diastereoisomers identified (α – HBCDD, β-HBCDD, γ-HBCDD)25637-99-4 and 3194- 55-6 (134237-50-6, 134237-51-7, 134237-52-8) 247-148-4 and 221-695-9 ND 0.005 PBT Bis(tributyltin)oxide*56-35-9 200-268-0 ND 0.005 PBT Cobalt dichloride* 7646-79-9 231-589-4 ND 0.005 Carcinogen Category 2 Diarsenic pentaoxide* 1303-28-2 215-116-9 ND 0.005 Carcinogen Category 1 Diarsenic trioxide* 1327-53-3 215-481-4 ND 0.005 Carcinogen Category 1 Triethyl arsenate* 15606-95-8 427-700-2 ND 0.005 Carcinogen Category 1 Lead hydrogen arsenate*7784-40-9232-064-2ND0.005Carcinogen Category 1; Toxic to Reproduction Category 1 Sodium dichromate* 10588-01-9 234-190-3 ND 0.005Carcinogen Category 2; Mutagen Category 2; Toxic to Reproduction Category 2Test Report No.: GZ1001005831/CHEM Date: JAN 22, 2010 Page 4 of 7 (SVHC)Remark:1*. Calculated concentration of cobalt dichloride is based on the identified cobalt by ICP-AES and the identified chloride by IC method.Calculated concentration of diarsenic pentaoxide, diarsenic trioxide, lead hydrogen arsenate and triethyl arsenate are based on the identified heavy metal result (i.e. Arsenic, Lead)Calculated concentrations of sodium dichromate are based on the identified sodium by ICP-AES and the identified chromium(VI) by spectroscopic method. The test result is reported as sodium dichromate (CAS number 10588-01-9). Please note that sodium dichromate dihydrate (CAS number 7789-12-0) is no longer classified as SVHCaccording to the latest amendment of 67/548/EEC (31th Adapation to Technical progress).Calculated concentration of bis(tributyltin)oxide TBTO is based on the identified tin by ICP- AES and confirmed by TLC.Identity of above metal substances present in the article has to be further confirmed.Reporting Limit is evaluated for element (i.e. tin, cobalt, chloride, arsenic, lead, sodium, chromium (VI) respectively)2. ND = Not detected (lower than Reporting Limit)3. All Reporting Limit is based on homogenous materialTest ReportNo.: GZ1001005831/CHEMDate: JAN 22, 2010Page 5 of 7(SVHC)ATTACHMENTS ATTACHMENTSTesting Flow Chart Testing Flow Chart1) Name of the person who made measurement: Bella Wang / Tina Zhao 2) Name of the person in charge of measurement: Adams Yu / Ryan YangTest ReportNo.: GZ1001005831/CHEMDate: JAN 22, 2010Page 6 of 7(SVHC)Sample photo : SGS authenticate the photo on original report onlyGZ1001005831/CHEMTest ReportNo.: GZ1001005831/CHEMDate: JAN 22, 2010Page 7 of 7(SVHC)Appendix A ClassificationDefinition under 67/548/EEC and Regulation (EC) No 1907/2006Carcinogen Category 1: Substances known to be carcinogenic to man. There is sufficient evidence to establish acausal association between human exposure to a substance and the development of cancer.Carcinogen Category 2: Substances which should be regarded as if they are carcinogenic to man. There issufficient evidence to provide a strong presumption that human exposure to a substance may result in the development of cancer. Generally on the basis of:- appropriate long-term animal studies - other relevant information.Mutagen Category 1:Substances known to be mutagenic to man. There is sufficient evidence to establish a causal association between human exposure to a substance and heritable genetic damage.Mutagen Category 2:Substances which should be regarded as if they are mutagenic to man. There is sufficient evidence to provide a strong presumption that human exposure to the substance may result in the development of heritable genetic damage, generally on the basis of: - appropriate animal studies, - other relevant information.Toxic to Reproduction Category 1:Substances known to impair fertility in humans. There is sufficient evidence to establish a causal relationship between human exposure to the substance and impaired fertility. Substances known to cause developmental toxicity in humans. There is sufficientevidence to establish a causal relationship between human exposure to the substance and subsequent developmental toxic effects in the progeny.Toxic to Reproduction Category 2:Substances which should be regarded as if they impair fertility in humans. There is sufficient evidence to provide a strong presumption that human exposure to the substance may result in impaired fertility on the basis of:- clear evidence in animal studies of impaired fertility in the absence of toxic effects, or, evidence of impaired fertility occurring at around the same dose levels as other toxic effects but which is not a secondary nonspecific consequence of the other toxic effects, - other relevant information.Substances which should be regarded as if they cause developmental toxicity to humans. There is sufficient evidence to provide a strong presumption that human exposure to the substance may result in developmental toxicity, generally on the basis of:- clear results in appropriate animal studies where effects have been observed in theabsence of signs of marked maternal toxicity, or at around the same dose levels as other toxic effects but which are not a secondary non-specific consequence of the other toxic effects,- other relevant information.PBT & vPvB:Substances which are persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB) pose a particular challenge to the chemicals safetymanagement. For these substances a “safe” concentration in the environment cannot be established with sufficient reliability.*** End of Report ***。
sgs检测报告样本
sgs检测报告样本Cadmium (Cd)..100mg/kg.2 ND Lead (Pb)..1,000mg/kg.2NDMercury (Hg).1,000mg/kg.2NDHexavalent Chromium (CrVI).1,000mg/kg.2NDSum of PBBs.1,000mg/kg.2 ND Monobromobiphenyl.mg/kg.-NDDibromobiphenyl.mg/kg.5NDTribromobiphenyl.mg/kg.5 ND Tetrabromobiphenyl.mg/kg.5NDPentabromobiphenyl.mg/kg.Hexabromobiphenyl.mg/kg.5NDHeptabromobiphenyl.mg/kg.Octabromobiphenyl.mg/kg.5NDNonabromobiphenyl ..mg/kg.Decabromobiphenyl.mg/kg.5 NDSum of PBDEs 1,00 mg/kg.5NDMonobromodiphenyl ether.MDL. 002.NDTest Report.No. CANEC13Date: 12 May 2013.Page 3 of 5.Test Item(s)..Dibromodiphenyl ether.Tribromodiphenyl ether.Tetrabromodiphenyl ether.Pentabromodiphenyl ether.Hexabromodiphenyl ether.Heptabromodiphenyl ether.Octabromodiphenyl ether.Nonabromodiphenyl ether.Decabromodiphenyl ether.Limit..(1) The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II.. Note: the results shown for the content of total weight in wet sample.Test Report.No. CANEC13Date: 12 May 2013.Page 4 of 5.ATTACHMENTSRoHS Testing Flow Chart1) Name of the person who made testing：Michael Tso / Cutey Yu / Dayi Zhan2) Name of the person in charge of testing：Adams Yu / Yolanda Wei3) These samples were dissolved totally by pre -conditioning method according to below flow chart(Cr6+ and PBBs/PBDEs test method excluded).Sample PreparationTest Report.No. CANEC13Date: 12 May 2013.Page 5 of 5.Sample photo:.CANEC13CAN13- .SGS authenticate the photo on original report only*** End of Report ***.以上这篇关于sgs检测报告样本为您介绍到这里，希望它对您有帮助。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Co.,LTD.
SHANGMEILIN District .Shenzhen
The following sample(s) was/were submitted and identified on behalf of the clients as :
SGS Job No :
Date of Sample Received : Testing Period :
Test Requested :
Test Method :
Test Results :
Conclusion :CP13- - GZ
09 May 2013
09 May 2013 - 12 May 2013
Selected test(s) as requested by client
Please refer to next page(s)
Please refer to next page(s)
Based on the performed tests on submitted samples, the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE) comply with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC
Signed for and on behalf of
SGS-CSTC Ltd.
MErry Lv
Approved Signatory
Test Results :
Test Part Description : Specimen No.
1 SGS Sample ID CAN13- Description Green fluid
Remarks :
(1) 1 mg/kg = 1 ppm = 0.0001%
(2) MDL = Method Detection Limit
(3) ND = Not Detected ( < MDL )
(4) "-" = Not Regulated
RoHS Directive 2011/65/EU
Test Method : With reference to IEC 62321:2008:
(1) Determination of Cadmium by ICP-OES. (2) Determination of Lead by ICP-OES.
(3) Determination of Mercury by ICP-OES.
(4) Determination of Hexavalent Chromium by Colorimetric Method using UV-Vis.
(5) Determination of PBBs / PBDEs content by GC-MS.
Test Item(s) Cadmium (Cd) Lead (Pb) Mercury (Hg) Hexavalent Chromium (CrVI) Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Sum of PBDEs Monobromodiphenyl ether Limit 100 1,000 1,000 1,000 1,000 - - - - - - -
-
-
-
1,000
-
Unit
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
MDL
2
2
2
2
-
5
5
5
5
5
5
5
5
5
5
-
5
002
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
Test Item(s) Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether Limit - - - - - - - - -
Unit
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
MDL
5
5
5
5
5
5
5
5
5
002
ND
ND
ND
ND
ND
ND
ND
ND
ND
Notes :
(1) The maximum permissible limit is quoted from the directive 2011/65/EU, Annex II Note: the results shown for the content of total weight in wet sample. .。