2011佑泽电子 电脑周边设备 新品介绍
【可以看,也可以碰】ViewSonic VX2258wm
享 受触 摸技 术带 来 的便 利 了 。
我 们 注 意 到 Ｖ Ｘ２ ５ Ｗ ｍ 采 用 ２ ８ Ｃ ＣＦＬ背 光 加 上 触 摸 感 应 方 面 的 设 计 让 屏 幕 厚 度 较 大 ， 不 过 这 并 不 影 响 使 用 ，但 是 亮 度 方
面 似 乎 就 暗 了 些 其 标 称 的 如 今 ， 触 摸 设 计 可 以 说 大 行 其 道 。 无 论 是 手 机 还 是
情并茂 ” 了。 和 普 通 显 示 器 相 比 ，
Ｖｉ ｅｗＳ ｉ ｏｎ ｃ ＶＸ２ ５ ｗ ｍ ２ ８
编 辑评 价
这台看上去并没有什么特别之处的２ ２ 英寸显示器能够支持多点触控是最大 的价值所在 ．有了它你不用再对一体
ＶＸ２ ５ Ｗ ｍ 的 过 人 之 处 在 于 ２ ８ Ｍ ｕｌ ｉ ｔ —ＴｏＵ Ｃｈ触 摸 技 术 。 由 于Ｗ ｉ ｎｄＯ ｓ 对 触 摸 技 术 的 全 Ｗ ７ 面 支 持 ， 你 只 要 用 一 根 ＵＳＢ电 缆 把 它 和 电 脑 连 接 就 可 以 马 上
了些 。 虽然 亮 度偏 低 且没 有 采
用 ＬＥＤ技 术 ， 但 是 其 能 效 表 现 仍 然 较 好 ， 中 心 点 测 试 得 到 的 能 效 值 仍 然 达 到 了 国 家 一 级 标
准 。 口
黑 色 外 观 设 计 ， 一 个 粗 壮 的 柱 也 很 方 便 。 ＶＸ２ ５ ｗ ｍ内 置 了 ２８ 形 支 撑 配 合 直 角 形 底 座 显 得 非 立 体 声 扬 声 器 ， 如 果 对 音 质 要
６ 度水平视角色度变化 ｖ ０
０ ０９ ９
▲粤分蓝高瞳好 ， 霉分越低越好
不 是什 么令 人惊 讶 的事 情 了 ， 最 近 我们 就 有 多个 品 牌 的触摸
威盛科技 UNO-2484G 电脑 用户手册说明书
限用物質含有情況標示聲明書Declaration of the Presence Condition of Restricted Substances Marking設備名稱：電腦 型號(型式)：UNO-2484GEquipment name Type designation (Type)單元Unit限用物質及其化學符號Restricted substances and its chemical symbols鉛Lead(Pb)汞Mercury(Hg)鎘Cadmium(Cd)六價鉻Hexavalentchromium(Cr+6)多溴聯苯Polybrominatedbiphenyls(PBB)多溴二苯醚PolybrominatedDiphenyl ethers(PBDE)電路板-○○○○○內外殼（外殼、内部框架…… 等）○○○○○○其它固定組件(螺絲)-○○○○○記憶卡-○○○○○備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage con-tent of the restricted substance exceeds the reference percentage value of presence condi-tion.備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.備考 3.〝－〞係指該項限用物質為排除項目。
矽创芯片产品介绍
ST7583 ST7585 ST7573 ST7565R ST7565P ST7588T ST7570
ST7567 ST7536 ST7527
ST7539
Planning
2012 Plan
Product Name Resolution Display RAM Interface VDDI VDDA Vop (max) Driving Method COM sequence Pad Pitch Component (pcs) Package Type
CGRAM Size
8 characters
ห้องสมุดไป่ตู้
Interface
80, 68, 4/3SPI, and I2C
PAD Pitch
35
VDD
1.8V~3.3V
VDD2
2.7V~3.3V
Driving Waveform
Green Driver
Pump
x5
Component
C×2
VLCD
~6.6V
1A
ST7038 100x8+80 ICON 100x16+80 ICON 80x24+80 ICON
62 2.7V~5.5V 2.7V~5.5V
B type x2 C×2 ~7V 0D
ST7038/38S
Product Resolution CGROM Size
ST7038S
80x8+80 ICON 80x16+80 ICON 80x24+80 ICON
256 chars
DDRAM Size
80 characters
• Green Driver
Kramer电子有限公司产品说明书：VM-1610、VM-80A
Kramer Electronics, Ltd.USER MANUALModels:VM-1610, 1:10 Balanced Audio-Stereo Distributor VM-80A, 1:8 Audio DistributorContentsContents1Introduction 1 2Getting Started 1 2.1Quick Start 2 3Overview 3 4Your VM-1610 and VM-80A Distribution Amplifiers 3 4.1Your VM-1610 1:10 Balanced Audio-Stereo Distributor 3 4.2Your VM-80A 1:8 Audio Distributor 5 5Installing the VM-1610 in a Rack 6 6Connecting the VM-1610 and VM-80A 7 6.1Connecting the VM-1610 Distribution Amplifier 7 6.2Connecting the VM-80A Distribution Amplifier 8 6.2.1Changing the VM-80A Default Mode 10 7Technical Specifications 10FiguresFigure 1: VM-1610 1:10 Balanced Audio-Stereo Distributor 4 Figure 2: VM-80A 1:8 Audio Distributor Functions 5 Figure 3: Connecting the VM-1610 in a 1:10 Configuration 8 Figure 4: Connecting the VM-80A in a 1:8 Configuration 9 TablesTable 1: VM-1610 1:10 Balanced Audio-Stereo Distributor Functions 5 Table 2: VM-80A 1:8 Audio Distributor Functions 5 Table 3: Technical Specifications 10Introduction1 IntroductionWelcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we haveredesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1Thank you for purchasing the Kramer VM-1610 1:10 Balanced Audio-Stereo Distributor and/or the VM-80A 1:8 Audio Distributor , which are ideal for:that are clearly defined by function.• Any professional A/V system requiring high quality signaldistribution• Recording studios and live sound reinforcement systems • Rental and staging applications Each package includes the following items: • The VM-1610 and/or the VM-80A • Power cord 2• This user manual32 Getting StartedWe recommend that you:• Unpack the equipment carefully and save the original box andpackaging materials for possible future shipment • Review the contents of this user manual• Use Kramer high-performance high-resolution cables 41 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products2 We recommend that you use only the power cord supplied with this device3 Download up-to-date Kramer user manuals from our Web site at 4 The complete list of Kramer cables is on our Web site at Getting Started2.1 Quick StartThis quick start chart summarizes the basic setup and operation steps.Overview3 OverviewThe VM-1610 is a high-performance distribution amplifier for balanced stereo signals. It can also be configured as one 1:10 or two 1:5 balanced stereo audio distribution amplifiers. The VM-1610 features:• Grouped audio level controls• Configuration as a 1:10 or 2x1:5 DA • A signal to noise ratio of 92dB @1Vpp • A standard 1U 19” rack mount sizeThe VM-80A is a high-performance distribution amplifier for balanced stereo audio signals. It can be configured as one 1:8 or two 1:4 balanced stereo audio distribution amplifiers.The VM-80A features:• Grouped audio level controls• Configuration as a 1:8 or 2x1:4 DA• A signal to noise ratio of 100dB @1Vpp• Compact desktop size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter To achieve the best performance:• Use only good quality connection cables 1• Avoid interference from neighboring electrical appliances thatmay adversely influence signal quality and position your Kramer products away from moisture, excessive sunlight and dustto avoid interference,deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables).4 Your VM-1610 and VM-80A Distribution AmplifiersSection 4.1 defines the VM-1610 and section 4.2 defines the VM-80A distribution amplifiers.4.1 Your VM-1610 1:10 Balanced Audio-Stereo Distributor Figure 1 and Table 1 define the VM-1610.1 Available from Kramer Electronics on our Web site at Your VM-1610 and VM-80A Distribution AmplifiersFigure 1: VM-1610 1:10 Balanced Audio-Stereo DistributorYour VM-1610 and VM-80A Distribution AmplifiersTable 1: VM-1610 1:10 Balanced Audio-Stereo Distributor Functions4.2 Your VM-80A 1:8 Audio Distributor Figure 2 and Table 2 define the VM-80A.Figure 2: VM-80A 1:8 Audio Distributor Functions Table 2: VM-80A 1:8 Audio Distributor FunctionsInstalling the VM-1610 in a Rack5 Installing the VM-1610 in a RackThis section describes how to install the VM-1610 in a rack.!6 Connecting the VM-1610 and VM-80ASection 6.1 describes how to connect the VM-1610 and section 6.2describes how to connect VM-80A.6.1 Connecting the VM-1610 Distribution AmplifierTo connect the VM-1610 in a 1:10 configuration, as shown in Figure 3, do:the following11. Connect the input source (for example, a balanced stereo audio player) tothe Channel 1 INPUT terminal block connector.2. Connect the OUT terminal block connectors to up to 10 acceptors (forexample, balanced stereo audio recorders).3. Release the MODE button to the 1:10 position.4. Switch on the VM-1610.The audio input is distributed to the audio outputs.Note: The Channel 2 INPUT cannot be distributed to the 10 outputs,only the Channel 1 INPUT.5. Adjust the right and left audio levels by turning the CH1 and CH2 LEVELtrimmers with a small screwdriver.To connect the VM-1610 in a 2x1:5 configuration, do the following1:1. Connect input source 1 (for example, a balanced stereo audio player) to theChannel 1 INPUT terminal block connector.2. Connect input source 2 (for example, a balanced stereo audio player) to theChannel 2 INPUT terminal block connector.3. Connect the Channel 1 OUT terminal block connectors to up to 5 acceptors(for example, balanced stereo audio recorders).4. Connect the Channel 2 OUT terminal block connectors to up to 5 acceptors(for example, balanced stereo audio recorders).5. Press in the MODE button to the 2x1:5 position.6. Switch on the VM-1610.The Channel 1 audio inputs are distributed to the Channel 1 audio outputs.The Channel 2 audio inputs are distributed to the Channel 2 audio outputs.1 Switch OFF the power on each device before connecting it to your VM-1610. After connecting your VM-1610, switch on its power and then switch on the power on each device7. Adjust the right and left audio levels by turning the CH1 and CH2 LEVELtrimmers with a small screwdriver.Figure 3: Connecting the VM-1610 in a 1:10 Configuration6.2 Connecting the VM-80A Distribution AmplifierTo connect the VM-80A in a 1:8 configuration, as shown in Figure 4, do the :following11. Connect the input source (for example, a balanced stereo audio player) tothe CH 1 INPUT terminal block connector.2. Connect the OUT terminal block connectors to up to 8 acceptors (forexample, balanced stereo audio recorders).3. Press the 1:8 MODE button.4. Switch on the VM-80A.The audio input is distributed to the audio outputs.Note: CH 2 INPUT cannot be distributed to all 8 outputs, only the CH1 INPUT can.1 Switch OFF the power on each device before connecting it to your VM-80A. After connecting your VM-80A, switch on its power and then switch on the power on each deviceConnecting the VM-1610 and VM-80A5. Adjust the right and left audio levels by turning the CH1 and CH2 LEVELtrimmers with a small screwdriver. To connect the VM-80A in a 2x1:4 configuration, do the following 11. Connect input source 1 (for example, a balanced stereo audio player) to theCH 1 INPUT terminal block connector. : 2. Connect input source 2 (for example, a balanced stereo audio player) to theCH 2 INPUT terminal block connector. 3. Connect the CH 1 OUT terminal block connectors to up to 4 acceptors (forexample, balanced stereo audio recorders). 4. Connect the CH 2 OUT terminal block connectors to up to 4 acceptors (forexample, balanced stereo audio recorders). 5. Switch on the VM-80A .6. Press the 2x1:4 MODE button.The Channel 1 audio inputs are distributed to the Channel 1 audio outputs. The Channel 2 audio inputs are distributed to the Channel 2/1 audio outputs. 7. Adjust the right and left audio levels by turning the CH1 and CH2 LEVELtrimmers with a small screwdriver.Figure 4: Connecting the VM-80A in a 1:8 Configuration1 Switch OFF the power on each device before connecting it to your VM-80A . After connecting your VM-80A , switch on its power and then switch on the power on each deviceTechnical Specifications6.2.1 Changing the VM-80A Default ModeBy factory default, the VM-80A starts in 1:8mode.To change the default mode to 2x1:4:1. Disconnect the device from its power source.2. Open the top cover of the device.3. Move the jumper on the main board from JP1 to JP2.This operation must be performed by a qualified technician.7 Technical SpecificationsThe VM-1610 and VM-80A technical specifications are shown in Table 3:Table 3: Technical Specifications11 Specifications are subject to change without notice11LIMITED WARRANTYWHO IS PROTECTED?WHAT IS COVERED AND WHAT IS NOT COVEREDWHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FORHOW YOU CAN GET WARRANTY SERVICELIMITATION OF IMPLIED WARRANTIESEXCLUSION OF DAMAGESCAUTION!Kramer Electronics (hereafter ) warrants this product free from defects in material and workmanship under the following terms.Kramer HOW LONG IS THE WARRANTYLabor and parts are warranted for seven years from the date of the first customer purchase.Only the first purchase customer may enforce this warranty.We will pay labor and material expenses for covered items. We will not pay for the following:The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for:This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.This equipment has been tested to determine compliance with the requirements of:EN-50081:"Electromagnetic compatibility (EMC);generic emission standard.Residential, commercial and light industry"EN-50082:"Electromagnetic compatibility (EMC) generic immunity standard.Part 1: Residential, commercial and light industry environment".CFR-47:FCC* Rules and Regulations:Part 15: “Radio frequency devices Subpart B Unintentional radiators”Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty:1.Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you areuncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site .2.Any product, on which the serial number has been defaced, modified or removed, or on which the W ARRANTY VOIDTAMPERED sticker has been torn, 3.Damage, deterioration or malfunction resulting from:i)Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature ii)Product modification, or failure to follow instructions supplied with the product iii)Repair or attempted repair by anyone not authorized by Krameriv)Any shipment of the product (claims must be presented to the carrier)v)Removal or installation of the productvi)Any other cause, which does not relate to a product defectvii)Cartons, equipment enclosures, cables or accessories used in conjunction with the product1.Removal or installations charges.2.Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are theresponsibility of the Kramer dealer from whom the product was purchased.3.Shipping charges.1.To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.2.Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warrantycoverage, and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and a description of the problem(s).3.For the name of the nearest Kramer authorized service center, consult your authorized dealer.All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.1.Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, lossof time, commercial loss; or:2.Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long animplied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you.Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment.Use the supplied DC power supply to feed power to the machine.Please use recommended interconnection cables to connect the machine to other components.IF reattached, removed or otherwise interfered with.* FCC and CE approved using STP cable (for twisted pair products)NOTE:Part 1:Kramer Electronics, Ltd.Web site: E-mail:*****************P/N: 2900-001002 REV 3For the latest information on our products and a list of Kramer distributors, visit our Web site: where updates to this user manual may be found. We welcome your questions, comments and feedback.CautionSafety Warning :Disconnect the unit from the power supply before opening/servicing.。
亿科 21.5寸AUO M215HTN01.1(68颗4014灯)模组规格书
文件名称BLU Purchase Specification模组规格书页次1 / 13产品名称215W-3TLED单侧背光版次1.1规格书Specification Sheet 客戶 :(Customer Name) _品名:( Material Name)料号:(Material Number)料号:(Customer Material Number)客户承认CustomerApproved by承认Checked by审核Approved by承认Checked by审核Designed by编写亿科承认AU OPTRONICS CORPORATIONProduct Specification M215HTN01.1() Preliminary Specification(V) Final SpecificationModule 21.5” Color TFT-LCDModel Name M215HTN01.1 open cellCustomer DateApproved byNote: This Specification is subject to change without notice. Approved by Date Howard Lee2012/10/22 Prepared byLouis Jung2012/ 10/22 AU Optronics corporation3.0 Functional Block DiagramThe following diagram shows the functional block of the21.5 inch Color TFT-LCD Module:I/F PCB Interface:P-TWO AL230F-A0G1D-PSTM MSCKT2407P30HBMating Type:FI-X30HL (Locked Type)5.0 Electrical characteristics 5.1 TFT LCD Module 5.1.1 Power SpecificationInput power specifications are as following:Note 1: Measurement conditions:The duration of rising time of power input is 470us.Symbol Parameter Min Typ Max Unit ConditionsVDDLogic/LCD DriveVoltage 4.5 5.0 5.5 [Volt] +/-10%- 1.13 1.36 [A] VDD= 5.0V, All Black Pattern At 60HzIDDInput Current1.34 1.61 [A] VDD= 5.0V, All Black Pattern At 75Hz- 5.65 6.80 [Watt] VDD= 5.0V, All Black Pattern At 60HzPDDVDD Power6.7 8.05 [Watt] VDD= 5.0V, All Black Pattern At 75Hz IRushInrush Current --3[A]Note 1VDDrpAllowable Logic/LCD Drive Ripple Voltage-- 500 [mV] p-pVDD= 5.0V, All Black Pattern At 75Hz6.3 Signal DescriptionPIN # SIGNAL NAME DESCRIPTION1 RxO0- Negat ive LVDS differential data input (Odd data)2 RxO0+ Positive LVDS differential data input (Odd data)3 RxO1- Negat ive LVDS differential data input (Odd data)4 RxO1+ Positive LVDS differential data input (Odd data)5 RxO2- Negat ive LVDS differential data input (Odd data)6 RxO2+ Positive LVDS differential data input (Odd data)7 GND Power Ground8 RxOCLK- Negat ive LVDS differential clock input (O dd clock)9 RxOCLK+ Positive LVDS differential clock input (O dd clock)10 RxO3- Negat ive LVDS differential data input (Odd data)11 RxO3+ Positive LVDS differential data input (Odd data)12 RxE0- Negat ive LVDS differential data input (Even data)13 RxE0+ Positive LVDS differential data input (Even data)14 GND Power Ground15 RxE1- Negat ive LVDS differential data input (Even data)16 RxE1+ Positive LVDS differential data input (Even data)17 GND Power Ground18 RxE2- Negat ive LVDS differential data input (Even data)19 RxE2+ Positive LVDS differential data input (Even data)20 RxECLK- Negat ive LVDS differential clock input (Even clock)21 RxECLK+ Positive LVDS differential clock input (Even clock)22 RxE3- Negat ive LVDS differential data input (Even data)23 RxE3+ Positive LVDS differential data input (Even data)24 GND Power Ground25 NC No connection (for AUO test only. Do not connect)26 NC No connection (for AUO test only. Do not connect)27 NC No connection (for AUO test only. Do not connect)28 VDD Power +5V29 VDD Power +5V30 VDD Power +5VNote 1: Input signals of odd and even clock shall be the same timing.灯条串并定义及接口型号定义：4.. BACKLIGHT UNITValue Parameter Symbol Min. Typ.Max. UnitNote LED Light Bar Input Voltage Per Input PinVPIN -- 56(1), Duty=100%, IPIN=(60mA)IPIN --mA (1), (2) Duty=100%LED Life Time LLED 30000Hrs(3) Power ConsumptionPBL--(9.2)W(1)Duty=100%, IPIN=(60mA)Note (1) LED light bar input voltage and current are measured by utilizing a true RMS multimeter as shownbelow:Note (2) PBL = IPIN × VPINNote (3) The lifetime of LED is defined as the time when LED packages continue to operate under theconditions at Ta = 25 ±2 к and I= (25)mA (per chip) until the brightness becomes Љ 50% of its original value.灯条总电流Ｉ230240－－－－－－Ｖ４０１４（６０ＭＡ）灯珠 １７串４并Figure 1. Measurement Set Up(L =50cm)Figure 2. White Luminance and Uniformity Measurement Locations (9 points) 192 960 17285409727.1.1 Pin AssignmentPin# Signal Name Pin# Signal Name 1 RxO0- 2 RxO0+ 3 RxO1- 4 RxO1+ 5 RxO2- 6 RxO2+ 7 GND 8 RxOCLKIN- 9 RxOCLKIN+ 10 RxO3- 11 RxO3+ 12 RxE0- 13 RxE0+ 14 GND 15 RxE1- 16 RxE1+ 17 GND 18 RxE2- 19 RxE2+ 20 RxECLKIN- 21 RxECLKIN+ 22 RxE3- 23 RxE3+24 GND25NC (for AUO test only. Do not connect)26 NC (for AUO test only. Do not connect) 27 NC (for AUO test only. Do not connect) 28 VDD 29VDD30VDD环境温度(Ta)＝25℃±2 湿度HR=65%±10項目 Item單位unit規 格 Spction 备注 RemarkMINTYPMAXCenter point（NOTE 1）1模组亮度BLU BrightnessCenter point cd/m 2250 --- 均匀性Uniformity 9点（NOTE2） 2模组色度LCM CIEx --- -0.030 0.313 +0.030 Center point y --- -0.030 0.329 +0.030Center point中心点为最亮点 The center brightness data ia the maximum下图示中9点之最小数值点比中心点，均匀性定义：Minimum(1-9)/Maximum(5)mum value of 9 point divided by the center ,------75---8.0 Reliability TestEnvironment test conditions are listed as following table.Items Required Condition Note Temperature Humidity Bias (THB) Ta= 50,℃80%RH, 300hoursHigh Temperature Operation (HTO) Ta= 50,℃50%RH, 300hoursLow Temperature Operation (LTO) Ta= 0, 300hours℃High Temperature Storage (HTS) Ta= 60, 300hours℃Low Temperature Storage (LTS) Ta= -20, 300hours℃Vibration Test (Non-operation) Acceleration: 1.5 GrmsWave: RandomFrequency: 10 - 200 HzSweep: 30 Minutes each Axis (X, Y, Z)Shock Test (Non-operation) Acceleration: 50 GWave: Half-sineActive Time: 20 msDirection: ±X,±Y,±Z (one time for each Axis)Drop Test Height: 60 cm, package testThermal Shock Test (TST) -20/℃30min, 60/℃30min, 100 cycles 1 On/Off Test On/10sec, Off/10sec, 30,000 cyclesContact Discharge: ± 15KV, 150pF(330Ω ) 1sec,8 points, 25 times/ point.ESD (Electro Static Discharge)Air Discharge: ± 15KV, 150pF(330Ω ) 1sec8 points, 25 times/ point.2Altitude Test Operation:18,000 ft Non-Operation:40,000 ftNote 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid temperature change. A cycle of rapid temperature change consists of varying the temperature from -20℃to 60℃, and back again. Power is not applied during the test. After temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on.Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowedNo data lostSelf-recoverableNo hardware failures.P。
Fujitsu CELSIUS W580 微型台式机工作站产品说明书
Data Sheet Fujitsu CELSIUS W580Fujitsu recommends Windows 10 Pro for business.Data SheetFujitsu CELSIUS W580Mini CAD PowerhouseIf you thought you would need to sacrifice performance, expandability, price or energy efficiency in a microtower design – think again. As an industry first, the FUJITSU CELSIUS W580 desktop workstation goes far and beyond with its innovative 21-liter, space-saving microtower design.No compromise in terms of performance, expandability and priceDesigned with CAD customers in mind: performance, reliability and great flexibility - at an affordable priceChoose between the energy-efficient Intel® Core™ processors or the powerful Intel® Xeon® E-2200 processor familySupport of Windows 10 Pro64 GB DDR4 2,666 MHz memory (incl. ECC) Maximum capacity of 16 TBBoost your storage performance with super-fast PCIe SSDsIndustry’s smallest VR-ready desktop workstation Innovative space-saving design - made in EuropeAn industry first: 21-liter desktop microtower workstationNVIDIA® Quadro® RTX 4000 VR-ready graphics (with CELSIUS W580power) Optimized thermal management and cooling solutionsEnjoy a silent workplace environment, thanks to low noise emission down to 18 dB(A) (depending on configuration)Multi-monitor experienceIdeal for showrooms, control rooms, surveillance or financial services companies Up to 8 monitors with the NVIDIA® Mosaic™ technology2-in-1: Workstation and Point-of-Sales deviceYour workstation can be deployed as a traditional workstation as well as a point-of-sales device in any retail environmentConnect your cash drawer and your scanner to two serial portsSupport of 24/7 operation with reliable high-endurance and business critical drivesComponentsProcessor Intel® Xeon® processor E-2288G (8 Cores / 16 Threads, 3.70 GHz, up to 5.0 GHz, 16 MB)Intel® Xeon® processor E-2286G (6 Cores / 12 Threads, 4.00 GHz, up to 4.9 GHz, 12 MB)Intel® Xeon® processor E-2278G (8 Cores / 16 Threads, 3.40 GHz, up to 5.0 GHz, 16 MB)Intel® Xeon® processor E-2276G (6 Cores / 12 Threads, 3.80 GHz, up to 4.9 GHz, 12 MB)Intel® Xeon® processor E-2274G (4 Cores / 8 Threads, 4.00 GHz, up to 4.9 GHz, 8 MB)Intel® Xeon® processor E-2246G (6 Cores / 8 Threads, 3.60 GHz, up to 4.8 GHz, 12 MB)Intel® Xeon® processor E-2244G (4 Cores / 8 Threads, 3.80 GHz, up to 4.8 GHz, 8 MB)Intel® Xeon® processor E-2236 (6 Cores / 12 Threads, 3.40 GHz, up to 4.8 GHz, 12 MB)Intel® Xeon® processor E-2234 (4 Cores / 8 Threads, 3.60 GHz, up to 4.8 GHz, 8 MB)Intel® Xeon® processor E-2226G (6 Cores / 6 Threads, 3.40 GHz, up to 4.6 GHz, 12 MB)Intel® Xeon® processor E-2224G (4 Cores / 4 Threads, 3.50 GHz, up to 4.7 GHz, 8 MB)Intel® Xeon® processor E-2224 (4 Cores / 4 Threads, 3.40 GHz, up to 4.6 GHz, 8 MB)Intel® Xeon® processor E-2186G (6 Cores / 12 Threads, 3.80 GHz, up to 4.7 GHz, 12 MB, Intel® UHD Graphics P630) *Intel® Xeon® processor E-2174G (4 Cores / 8 Threads, 3.80 GHz, up to 4.7 GHz, 8 MB, Intel® UHD Graphics P630) *Intel® Xeon® processor E-2136 (6 Cores / 12 Threads, 3.30 GHz, up to 4.5 GHz, 12 MB) *Intel® Xeon® processor E-2134 (4 Cores / 8 Threads, 3.50 GHz, up to 4.5 GHz, 8 MB) *Intel® Xeon® processor E-2126G (6 Cores / 6 Threads, 3.30 GHz, up to 4.5 GHz, 12 MB, Intel® UHD Graphics P630) *Intel® Xeon® processor E-2124 (4 Cores / 8 Threads, 3.30 GHz, up to 4.5 GHz, 8 MB) *Intel® Core™ i9-9900 processor (8 Cores / 16 Threads, 3.10 GHz, up to 5.0 GHz, 16 GB, Intel® UHD Graphics 630)Intel® Core™ i9-9900K processor (8 Cores / 16 Threads, 3.60 GHz, up to 5.0 GHz, 16 GB, Intel® UHD Graphics 630)Intel® Core™ i7-9700 processor (8 Cores / 8 Threads, 3.00 GHz, up to 4.7 GHz, 12 MB, Intel® HD Graphics 630) *Intel® Core™ i7-9700K processor (8 Cores / 8 Threads, 3.60 GHz, up to 4.9 GHz, 12 MB, Intel® UHD Graphics 630) *Intel® Core™ i5-9600 processor (6 Cores / 6 Threads, 3.10 GHz, up to 4.6 GHz, 9 MB, Intel® UHD Graphics 630) *Intel® Core™ i5-9500 processor (6 Cores / 6 Threads, 3.00 GHz, up to 4.4 GHz, 9 MB, Intel® UHD Graphics 630) *Intel® Core™ i5-8600 processor (6 Cores / 6 Threads, 3.10 GHz, up to 4.3 GHz, 9 MB, Intel® UHD Graphics 630) *Intel® Core™ i3-9100 processor (4 Cores / 4 Threads, 3.60 GHz, up to 4.2 GHz, 6 MB, Intel® HD Graphics 630) *Intel® vPro® Platform with all Intel® Xeon® processorsNo Intel® vPro® technology with Intel® Core™ i5 and Core™ i7 processors*with Intel® Turbo Boost Technology 2.0 (clock speed and performance will vary depending on workload and othervariables)Operating system preinstalledOperating system pre-installed Windows 10 Pro for WorkstationsWindows 10 Pro. Fujitsu recommends Windows 10 Pro forbusiness.Windows 10 Home Windows 10 Pro for WorkstationsWindows 10 Pro. Fujitsu recommends Windows 10 Pro for business.Windows 10 HomeOperating system compatible Linux LinuxOperating system notes Certified for Red Hat© Enterprise LinuxCertified for SUSE Enterprise DesktopCertified for SUSE Enterprise ServerFor some configurations third party drivers are currentlynot available or configuration restrictions may apply.Windows 10 Support: After the end of the product lifeFUJITSU will continue to test and support all upcomingWindow 10 releases for a period of maximum 5 years –depending on the available extension of hardware servicesthrough FUJITSU Warranty top ups. For details please see“FUJITSU Service Statement for Windows 10 Semi-Annual-Channel Support” at .Certified for Red Hat© Enterprise LinuxCertified for SUSE Enterprise Desktop (pending) Certified for SUSE Enterprise Server (pending)For some configurations third party drivers are currently not available or configuration restrictions may apply. Windows 10 Support: After the end of the product life FUJITSU will continue to test and support all upcoming Window 10 releases for a period of maximum 5 years – depending on the available extension of hardware services through FUJITSU Warranty top ups. For details please see “FUJITSU Service Statement for Windows 10 Semi-Annual-Channel Support” at .Memory modules 4 GB (1 module(s) 4 GB) DDR4, unbuffered, non-ECC, 2,666 MT/s, UDIMM8 GB (1 module(s) 8 GB) DDR4, unbuffered, ECC, 2,666 MT/s, UDIMM8 GB (1 module(s) 8 GB) DDR4, unbuffered, non-ECC, 2,666 MT/s, UDIMM16 GB (1 module(s) 16 GB) DDR4, unbuffered, ECC, 2,666 MT/s, UDIMM16 GB (1 module(s) 16 GB) DDR4, unbuffered, non-ECC, 2,666 MT/s, UDIMMGraphics High-end 3D: NVIDIA® Quadro® RTX 4000, 8 GB, PCIe x16, 3 x DisplayPort, 1 x Virtual LinkMidrange 3D: NVIDIA® Quadro® P2200, 5 GB, PCIe x16, 4 x DisplayPortMidrange 3D: AMD Radeon™ Pro WX 5100, 8 GB, 320 stream processors, PCIe x16, 4 x DisplayPortEntry 3D: NVIDIA® Quadro® P1000, 4 GB, PCIe x16, 4 x miniDPEntry 3D: AMD Radeon™ Pro WX 3100, 4 GB, 320 stream processors, PCIe x16, 1 x DisplayPort, 2 x miniDPEntry 3D: AMD Radeon™ Pro WX 2100, 2 GB, 320 stream processors, PCIe x16, 1 x DisplayPort, 2 x miniDPEntry 3D: NVIDIA® Quadro® P620, 2 GB, PCIe x16, 4 x miniDPEntry 3D: NVIDIA® Quadro® P400 , 2 GB, PCIe x16, 3 x miniDPRemote Graphics: CELSIUS RemoteAccess Dual Card, PCIe x1, 2 x miniDP, PCoIPRemote Graphics: CELSIUS RemoteAccess Quad Card, PCIe x1, 4 x miniDP, PCoIPOthers: VGA Extension CardOthers: DP to DVI-D (single link) Adapter CableOthers: MiniDP to DP Adapter CableNotes NVIDIA® Quadro® P4000 requires CELSIUS W580power or CELSIUS W580power+.Hard disk drives (internal)SSD SATA III, 960 GB High Endurance, 1DWDP, 2.5-inchSSD SATA III, 480 GB High Endurance, 1DWDP, 2.5-inchSSD SATA III, 240 GB High Endurance, 1DWDP, 2.5-inchSSD PCIe, 2048 GB M.2 NVMe Highend moduleSSD PCIe, 1024 GB M.2 NVMe Highend moduleSSD PCIe, 512 GB M.2 NVMe Highend moduleSSD PCIe, 256 GB M.2 NVMe Highend moduleSSD PCIe, 1x 2048 GB M.2 NVMe Highend cardSSD PCIe, 1x1024 GB M.2 NVMe Highend cardSSD PCIe, 1x 512 GB M.2 NVMe Highend cardSSD PCIe, 1x 256 GB M.2 NVMe Highend cardRAID1 Bundle 2x512GB M.2 NVMe HighendRAID1 Bundle 2x256GB M.2 NVMe HighendSSD PCIe, 1024 GB M.2 NVMe moduleSSD PCIe, 512 GB M.2 NVMe moduleSSD PCIe, 256 GB M.2 NVMe moduleSSD PCIe, 1024 GB M.2 NVMe module, SEDSSD PCIe, 512 GB M.2 NVMe module, SEDSSD PCIe, 256 GB M.2 NVMe module, SEDSSD PCIe, 1x 1024 GB M.2 NVMe cardSSD PCIe, 1x 512 GB M.2 NVMe cardSSD PCIe, 1x 256 GB M.2 NVMe cardSSD SATA III, 1024 GB, 2.5-inchSSD SATA III, 512 GB, 2.5-inchSSD SATA III, 256 GB, 2.5-inchSSD SATA III, 128 GB, 2.5-inchHDD SATA III, 7,200 rpm, 4,000 GB, 3.5-inch, business criticalHDD SATA III, 7,200 rpm, 2,000 GB, 3.5-inch, business criticalHDD SATA III, 7,200 rpm, 1,000 GB, 3.5-inch, business criticalHDD SATA III, 7,200 rpm, 2,000 GB, 2.5-inch, business criticalHDD SATA III, 7,200 rpm, 1,000 GB, 2.5-inch, business criticalHDD SATA III, 7,200 rpm, 2,000 GB, 3.5-inchHDD SATA III, 7,200 rpm, 1,000 GB, 3.5-inchHard disk notes One Gigabyte equals one billion bytes, when referring to hard disk drive capacity.24/7 ready (business critical HDDs required)Up to 20 GB of HDD space is reserved for system recoverySSHD (Solid State Hard Disk, Hybrid drive)SED (Self-Encrypting Drive)SSD (Solid State Disk)Drives (optional)BD Triple Writer SATA ultra slim (tray)DVD-ROMDVD Super MultiDVD Super Multi ultra slim (tray)MultiCard Reader 24in1 USB 2.0 3.5”Base unitBase unit CELSIUS W580CELSIUS W580powerMainboardMainboard type D3617Chipset Intel® C246Processor socket LGA 1151Processor quantity maximum1Supported capacity RAM (max.)64 GBMemory slots 4 DIMM (DDR4) ECC/non-ECCMemory frequency2,666 MT/sMemory notes Dual channel supportFor dual channel performance, 2 memory modules have to be ordered. Capacity per channel has to be the same.2666 MHz may be clocked down to 2400 MHz depending on processor and memory configurationLAN10/100/1,000 MBit/s Intel® I219LMBIOS version AMI Aptio VUEFI Specification 2.6BIOS features BIOS Flash EPROM update by softwareRecovery BIOSUnified Extensible Firmware Interface (UEFI)Audio type On boardAudio codec Realtek ALC671Audio features Internal speaker supports audio playback (optional), High Definition audio, 5.1 surround soundI/O controller on boardSerial ATA total8thereof SATA III8thereof eSATA 2 (optional)Controller functions Serial ATA III (6 Gbit)NCQAHCIRAID 0/1/5/10S26361-K1446-V515 CELSIUS W580Audio: line-in1Audio: line-out1Front audio: microphone1Front audio: headphone1Internal speakers1USB 2.0 total5USB 3.1 Gen1 (USB 3.0) total3S26361-K1446-V515 CELSIUS W580USB 3.1 Gen2 total5USB front2x USB 2.0; 2x USB 3.1 (gen2), 1x USB 3.1 (gen2) Type C; optional: 1x USB 3.1 Type-C (Gen2) via add on card and frontadapter bayUSB rear2x USB 2.0; 3x USB 3.1 (Gen1); 1x USB 3.1 (Gen2); optional: additional 1x USB 3.1 Type C (Gen2) via add on card USB internal1x USB 2.0 + 1x USB A 3.1 (Gen2)VGA optional: via adapter cardDisplayPort2DVI 1 (DVI-D)Serial (RS-232) optional: serial port (9pin, 16 byte FIFO, 16550 compatible)Mouse / Keyboard (PS/2)2Ethernet (RJ-45)1Parallel 1 (optional) (25pin with EPP and ECP)eSATA 1 (optional)Interface Module notes Anytime USB charge functionality, USB Typ C connector supports up to 15WInput device / componentsInput devices (optional)KeyboardMouseKBPC PX ECOMouse M440 ECOSpace Explorer USBDrive bays total62.5-inch internal bays13.5-inch internal bays23.5-inch external bays15.25-inch external bays2Drive bay notes5,25” bays: one bay in HH format, one bay for slim optical disc drive only;internal 3.5” bays: 3.5” drive (screwless) or 2.5” drive (screws);M.2-2280 1 x on mainboard (for PCIe or SATA SSD modules), supports Intel® Optane™ technologySlotsPCI-Express 3.0 x1 2 x ( / ) Full heightPCI-Express 3.0 x4 (mech. x16) 1 x (215 mm / ) Full heightPCI-Express 3.0 x16 1 x (240 mm / ) Full heightGraphics brand name Intel® HD Graphics P630, Intel® HD Graphics 630Shared video memory up to 1,782 MBTFT resolution (VGA)1,024 x 768 pixel1,280 x 1,024 pixel1,360 x 768 pixel1,440 x 900 pixel1,600 x 900 pixel1,600 x 1,200 pixel1,680 x 1,050 pixel1,920 x 1,080 pixelTFT resolution (DVI)1,280 x 1,024 pixel1,360 x 768 pixel1,440 x 900 pixel1,600 x 900 pixel1,680 x 1,050 pixel1,920 x 1,080 pixel1,920 x 1,200 pixelTFT resolution (DisplayPort)1,280 x 1,024 pixel1,360 x 768 pixel1,440 x 900 pixel1,600 x 900 pixel1,680 x 1,050 pixel1,920 x 1,080 pixel1,920 x 1,200 pixel2,560 x 1,440 pixel2,560 x 1,600 pixel3,440 x 1,440 pixel3,840 x 2,160 pixel4,096 x 2,304 pixelGraphics features Support for up to three independent displaysDirectX® 12HDCP supportOpenCL® 2.0OpenGL® 4.4One DisplayPort connector can be converted to DVI-D or HDMI with an optional external adapterFor multi monitoring mode, graphics card and integrated graphics run in parallelDisplayPort interface supports Ver. 1.2 incl. Multi-StreamDVI-D interface supports audio output for HDMI monitorsGraphics notes up to 1 GB dedicated video memory (main memory owned and locked for graphics use)Tested resolutions, depending on display type additional resolutions and frequencies possibleShared memory depending on main memory size and operating systemResolution (color depth up to 32 Bit/pixel)For TFT we recommend using 60HzElectrical valuesPower efficiency note power supply efficiency (at 230V; 10% / 20% / 50% / 100%load) : 75% / 83% / 85% / 84%power supply efficiency at 10% / 20% / 50% / 100% load for 230V: 80% / 87% / 90% / 87%; for 115V: 80% / 87% / 90% / 87%Rated voltage range100 V - 240 V100 V - 240 V Rated frequency range50 Hz - 60 Hz50 Hz - 60 Hz Operating voltage range90 V - 264 V90 V - 264 V Operating line frequency range47 Hz - 63 Hz47 Hz - 63 Hz Max. output of single power supply280 W400 W Power factor correction/active power active activeDimension with stand (W x D x H)Dimensions (W x D x H)180 x 304 x 375 mm7.09 x 11.97 x 14.76 inchOperating position VerticalWeight approx. 10 kg approx. 12 kg Weight (lbs)approx. 30.86 lbsWeight notes Actual weight may vary depending on configurationOperating ambient temperature10 - 35 °C (50 - 95 °F)Operating relative humidity 5 - 85 % (relative humidity)Product CELSIUS W580Model MI6WGermany GS (planned)Europe CEUSA/Canada FCC Class BcTUVusGlobal RoHS (Restriction of hazardous substances)WEEE (Waste electrical and electronic equipment)Microsoft Operating Systems (HCT / HCL entry / WHQL)ENERGY STAR® in progressChina CCC (planned)CCC (depending on configuration)CEL (Chinese energy label)TPM 2.0 for China (optional)Compliance link https:///sites/certificatesAdditional SoftwareAdditional software (preinstalled)Adobe® Reader® (pdf reader)McAfee® LiveSafe™ (provides award-winning antivirus protection for your PC and much more. 30 days trial pre-installed)Microsoft Office (1 month trial for new Microsoft® Office 365 customers. Buy Microsoft Office.)Additional software (optional)Recovery DVD for Windows®Drivers & Utilities DVD (DUDVD)CyberLink PowerDVD BD (playback software for Blu-ray Disc™)CyberLink PowerDVD DVD (playback software for DVD)Nero Essentials XLMicrosoft® Office Professional 2019Microsoft® Office Home and Business 2019(A Microsoft Account is required to activate each copy of these products. For purchase and activation only in the regionin which it was acquired.)SecurityPhysical Security Kensington Lock supportEye for padlockIntegrated cabinet lock (optional)Cable Cover (optional; covers and secures the ports andcables on rear side)Kensington Lock supportEye for padlockIntegrated cabinet lock (optional)Cable Cover (optional; covers and secures the ports and cables on rear side)System and BIOS Security Embedded security (TPM 2.0)EraseDisk (optional)Credential Guard Ready and Device Guard Capable(Windows 10, v. 1809; requires 8 GB or more system RAMand SSD PCIe NVME)Boot sector virus protectionWrite protect option for the Flash EPROMControl of all USB interfacesExternal USB ports can be disabled separatelyControl of external interfaces Embedded security (TPM 2.0)EraseDisk (optional)Credential Guard Ready and Device Guard Capable (Windows 10, v. 1809; requires 8 GB or more system RAM and SSD PCIe NVME)Boot sector virus protectionWrite protect option for the Flash EPROMControl of all USB interfacesExternal USB ports can be disabled separatelyControl of external interfacesUser Security User and supervisor BIOS passwordHard disk passwordAccess protection via external SmartCard reader (optional)Access protection via internal SmartCard reader (optional)Workplace Protect (secure authentication solution)User and supervisor BIOS passwordHard disk passwordAccess protection via external SmartCard reader (optional) Access protection via internal SmartCard reader (optional) Workplace Protect (secure authentication solution)Workplace Embedded Tools Auto BIOS Update via Fujitsu ServerAuto BIOS Update via customer serverEasy PC Protection Auto BIOS Update via Fujitsu Server Auto BIOS Update via customer server Easy PC ProtectionManageability MiscellaneousKeyboard on (Special Fujitsu keyboard required) Keyboard on with one key (KBPX Eco, KB521) Keyboard on with 2 keys (CTRL+CTRL) with PS2 or special USB keyboardsKeyboard on with any key (USB)Thermal managementExtended lifetime 24/7 (limited configurations)Keyboard on (Special Fujitsu keyboard required) Thermal managementKeyboard on with one key (KBPX Eco, KB521) Keyboard on with 2 keys (CTRL+CTRL) with PS2 or special USB keyboardsKeyboard on with any key (USB)Extended lifetime 24/7 (limited configurations)WarrantyWarranty period 3 years (depending on country)Warranty type Bring-In / Onsite Service (for countries within region EMEIA, for all other countries depending on local regulations) Product Support Services - the perfect extensionRecommended Service9x5, Onsite Response Time: Next Business DaySpare Parts availability 5 years after end of product lifeRecommended AccessoriesDisplay P27-8 TS UHDThe FUJITSU Display P27-8 TS UHD is perfect for multi-monitor usescenarios with its 3840 x 2160 Ultra HD resolution and the thin bezelhousing. The monitor has a 78°/178° wide viewing angle and a 100% sRGB color space to deliver you a consistent high picture quality. Features like ECO function, the DisplayView™ IT Suite manageability software as a range of connectivity options meet the requirements of medium- and large-sized businesses.Order Code: S26361-K1610-V160ContactFujitsu Technology SolutionsAddress: x-xx-x, street, city, state, ZIP code, country Phone: xx-xxxx-xxxx Fax : xx-xxxx-xxxxEmail:********************.com Website: /[country]2021-09-06 CE-ENdelivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such ownerMore informationAll rights reserved, including intellectual property rights. Changes to technical data reserved. Delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded.Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.For further information see /terms_of_use.html Copyright © Fujitsu Technology Solutions。
MMSZ4xxxT1G系列和SZMMSZ4xxxT1G系列零点电阻电源器件的商品说明书
MMSZ4686T1G MMSZ4686T1G.MMSZ4xxxT1G Series, SZMMSZ4xxxT1G Series Zener Voltage Regulators 500 mW, Low I ZT SOD−123 Surface MountThree complete series of Zener diodes are offered in the convenient, surface mount plastic SOD−123 package. These devices provide a convenient alternative to the leadless 34−package style.Features•500 mW Rating on FR−4 or FR−5 Board•Wide Zener Reverse V oltage Range − 1.8 V to 43 V•Low Reverse Current (I ZT) − 50 m A•Package Designed for Optimal Automated Board Assembly •Small Package Size for High Density Applications•ESD Rating of Class 3 (>16 kV) per Human Body Model•SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable•These Devices are Pb−Free and are RoHS Compliant*Mechanical Characteristics:CASE:V oid-free, transfer-molded, thermosetting plastic case FINISH:Corrosion resistant finish, easily solderableMAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 SecondsPOLARITY:Cathode indicated by polarity band FLAMMABILITY RATING:UL 94 V−0MAXIMUM RATINGSRating Symbol Max Units Total Power Dissipation on FR−5 Board,(Note 1) @ T L = 75°CDerated above 75°C P D5006.7mWmW/°CThermal Resistance, (Note 2) Junction−to−Ambient R q JA340°C/WThermal Resistance, (Note 2) Junction−to−Lead R q JL150°C/WJunction and Storage Temperature Range T J, T stg−55 to+150°CStresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.1.FR−5 = 3.5 X 1.5 inches, using the minimum recommended footprint.2.Thermal Resistance measurement obtained via infrared Scan Method.*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.Cathode AnodeSee specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet.DEVICE MARKING INFORMATIONSOD−123CASE 425STYLE 1Device Package Shipping†ORDERING INFORMATIONMARKING DIAGRAM†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our T ape and Reel Packaging Specifications Brochure, BRD8011/D.MMSZ4xxxT1G SOD−123(Pb−Free)3,000 /Tape & ReelMMSZ4xxxT3G SOD−123(Pb−Free)10,000 /Tape & Reel xx= Device Code (Refer to page 3)M= Date CodeG= Pb−Free Package(Note: Microdot may be in either location)1SZMMSZ4xxxT1G SOD−123(Pb−Free)3,000 /Tape & ReelSZMMSZ4xxxT3G SOD−123(Pb−Free)10,000 /Tape & ReelELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted, V F = 0.9 V Max. @ I F = 10 mA)Symbol ParameterV Z Reverse Zener Voltage @ I ZTI ZT Reverse CurrentI R Reverse Leakage Current @ V RVR Reverse VoltageI F Forward CurrentV F Forward Voltage @ I FProduct parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted, V F = 0.9 V Max. @ I F = 10 mA)Device*DeviceMarkingZener Voltage (Note 3)Leakage CurrentV Z (Volts)@ I ZT I R @ V RMin Nom Max m A m A VoltsMMSZ4678T1G CC 1.71 1.8 1.89507.51 MMSZ4679T1G CD 1.90 2.0 2.105051 MMSZ4680T1G CE 2.09 2.2 2.315041 MMSZ4681T1G CF 2.28 2.4 2.525021 MMSZ4682T1G CH 2.565 2.7 2.8355011 MMSZ4683T1G CJ 2.85 3.0 3.15500.81 MMSZ4684T1G CK 3.13 3.3 3.47507.5 1.5 MMSZ4685T1G CM 3.42 3.6 3.78507.52 MMSZ4686T1G CN 3.70 3.9 4.105052 MMSZ4687T1G CP 4.09 4.3 4.525042 SZMMSZ4687T1G CG6 4.09 4.3 4.525042 MMSZ4688T1G CT 4.47 4.7 4.9450103 MMSZ4689T1G CU 4.85 5.1 5.3650103 MMSZ4690T1G/T3G CV 5.32 5.6 5.8850104 MMSZ4691T1G CA 5.89 6.2 6.5150105 MMSZ4692T1G CX 6.46 6.87.145010 5.1 MMSZ4693T1G CY7.137.57.885010 5.7 MMSZ4694T1G CZ7.798.28.61501 6.2 MMSZ4695T1G DC8.278.79.14501 6.6 MMSZ4696T1G DD8.659.19.56501 6.9 MMSZ4697T1G DE9.501010.505017.6 MMSZ4698T1G DF10.451111.55500.058.4 MMSZ4699T1G DH11.401212.60500.059.1 MMSZ4700T1G DJ12.351313.65500.059.8 MMSZ4701T1G DK13.301414.70500.0510.6 MMSZ4702T1G DM14.251515.75500.0511.4 MMSZ4703T1G†DN15.201616.80500.0512.1 MMSZ4704T1G DP16.151717.85500.0512.9 MMSZ4705T1G DT17.101818.90500.0513.6 MMSZ4706T1G DU18.051919.95500.0514.4 MMSZ4707T1G DV19.002021.00500.0115.2 MMSZ4708T1G DA20.902223.10500.0116.7 MMSZ4709T1G DX22.802425.20500.0118.2 MMSZ4710T1G DY23.752526.25500.0119.0 MMSZ4711T1G†EA25.652728.35500.0120.4 MMSZ4712T1G EC26.602829.40500.0121.2 MMSZ4713T1G ED28.503031.50500.0122.8 MMSZ4714T1G EE31.353334.65500.0125.0 MMSZ4715T1G EF34.203637.80500.0127.3 MMSZ4716T1G EH37.053940.95500.0129.6 MMSZ4717T1G EJ40.854345.15500.0132.6 3.Nominal Zener voltage is measured with the device junction in thermal equilibrium at T L = 30°C ±1°C.*Include SZ-prefix devices where applicable.†MMSZ4703 and MMSZ4711 Not Available in 10,000/Tape & ReelTYPICAL CHARACTERISTICSV Z , T E M P E R A T U R E C O E F F I C I E N T (m V /C )°θV Z , NOMINAL ZENER VOLTAGE (V)Figure 1. Temperature Coefficients (Temperature Range −55°C to +150°C)V Z , T E M P E R A T U R E C O E F F I C I E N T (m V /C )°θ100101V Z , NOMINAL ZENER VOLTAGE (V)Figure 2. Temperature Coefficients (Temperature Range −55°C to +150°C)1.21.00.80.60.40.20T, TEMPERATURE (5C)Figure 3. Steady State Power Derating P p k, P E A K S U R G E P O W E R (W A T T S )PW, PULSE WIDTH (ms)Figure 4. Maximum Nonrepetitive Surge PowerP D , P O W E R D I S S I P A T I O N (W A T T S )V Z , NOMINAL ZENER VOLTAGEFigure 5. Effect of Zener Voltage onZener ImpedanceZ Z T , D Y N A M I C I M P E D A N C E ()ΩTYPICAL CHARACTERISTICSC , C A P A C I T A N C E (p F )V Z , NOMINAL ZENER VOLTAGE (V)Figure 6. Typical Capacitance 1000100101V Z , ZENER VOLTAGE (V)1001010.10.01I Z , Z EN E R C U R R E N T (m A )V Z , ZENER VOLTAGE (V)1001010.10.01I R , L E A K A G E C U R R E N T (A )μV Z , NOMINAL ZENER VOLTAGE (V)Figure 7. Typical Leakage Current10001001010.10.010.0010.00010.00001I Z , Z E N E R C U R R E N T (m A )Figure 8. Zener Voltage versus Zener Current(V Z Up to 12 V)Figure 9. Zener Voltage versus Zener Current(12 V to 91 V)SOD−123CASE 425−04ISSUE GDATE 07 OCT 2009SCALE 5:1NOTES:1.DIMENSIONING AND TOLERANCING PER ANSIY14.5M, 1982.2.CONTROLLING DIMENSION: INCH.DIM MIN NOM MAXMILLIMETERSINCHESA0.94 1.17 1.350.037A10.000.050.100.000b0.510.610.710.020c1.600.150.055D 1.40 1.80E 2.54 2.69 2.840.100---3.680.140L0.253.860.0100.0460.0020.0240.0630.1060.1450.0530.0040.0280.0710.1120.152MIN NOM MAX3.56H E---------0.006------------GENERICMARKING DIAGRAM**For additional information on our Pb−Free strategy and solderingdetails, please download the ON Semiconductor Soldering andMounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT**This information is generic. Please refer to device datasheet for actual part marking. Pb−Free indicator, “G” ormicrodot “ G”, may or may not be present.XXX= Specific Device CodeM= Date CodeG= Pb−Free Package1STYLE 1:PIN 1. CATHODE2. ANODE0.910.036ǒmminchesǓSCALE 10:1------q001010°°°°(Note: Microdot may be in either location) MECHANICAL CASE OUTLINEPACKAGE DIMENSIONSON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor theON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.PUBLICATION ORDERING INFORMATIONTECHNICAL SUPPORTNorth American Technical Support:Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910LITERATURE FULFILLMENT :Email Requests to:*******************ON Semiconductor Website: Europe, Middle East and Africa Technical Support:Phone: 00421 33 790 2910For additional information, please contact your local Sales RepresentativeMMSZ4686T1G MMSZ4686T1G.。
培训资料U7 U8 U9
优E派U7外形
赠送充电器，表面贴三层贴膜，侧边包装贴标签
自由生活
由掌
你
控
深圳市 优择科技有限公司
S h e n z h e n Y o u Z e n T e c h n o lo g y C o . , L t d
●高性价比的7寸双核学习电脑
优E派U7卖点
●资料全面，从各个年龄、各个地区的版本均有覆盖
●给予代理商的利润空间高，渠道深度可拓展性强
●外形独一无二，丌会引起撞衫
●差异化产品，短期内复制丌了
●学生能玩 家长也能玩
自由生活
●产品参数
由掌
你
控
深圳市 优择科技有限公司
S h e n z h e n Y o u Z e n T e c h n o lo g y C o . , L t d
◆采用了8寸1024X768的IPS电容屏 ,4:3比例 ◆A9双核平板电脑，四核显卡，主频1.6G*2； ◆内置了100多家出版社学习资料，涵盖了从 学前到高中的同步课件、点读学习等九门功课 学习资料； ◆正面白色纯平，背面五金背壳
自由生活
●产品参数
由掌
你
控
深圳市 优择科技有限公司
S h e n z h e n Y o u Z e n T e c h n o lo g y C o . , L t d
◆采用了9.7寸1024X768的IPS电容屏 ,4:3比例 ◆A9双核平板电脑，四核显卡，主频1.6G*2； ◆内置了100多家出版社学习资料，涵盖了从 学前到高中的同步课件、点读学习等九门功课 学习资料； ◆正面黑色纯平，背面五金背壳
单喇叭孔
优E派U9 市场价：1999元
◆1G内存，16G储存容量，自带蓝牙
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
1、mini系列夜精灵机箱
产品特点： 1、时尚的外观：面板采用先进的热转印 工艺印刷图案层次丰富、色彩鲜艳，再 现性好，保真度高,永不褪色，与时尚的 家具配合起来更具色彩。 2、兼容性强：小机箱，大心脏，可安装 大板大电源 3、散热性能超强：全方位立体化的散热 设计，后窗安装一个6寸风扇，再加上侧 板的散热窗、顶部和底部的散热孔，形 成有效的散热体系，使机箱的散热效果 更佳。 4、优质的做工：钢琴烤漆箱体，SECC 电解镀锌钢板，卷边设计不易伤手，周 边带有丰富EMI弹片，加上侧板无喷漆， 防辐射效果更为突出。 5、热转印工艺:首开在机箱行业采用热转 印工艺，面板色感强烈，耐腐蚀，耐酸 碱，图象清晰,永不褪色.符合绿色环保印 刷标准，无环境污染。
产品参数 驱动位 驱动位5.25*1(EXT) 驱动位3.5*2（EXT\INT） 适用主板 ATX/MATX 材料五金：SECC 五金厚度：0.6mm 塑胶：PC/ABS 扩展条 7条 散热系统 后置风扇：60MM*1（最多可以按装2个 60MM风扇） 侧板风扇位：120MM*1 规格 产品规格 （L)385MM*(W)138MM*(H)352MM 包装规格 （L)390MM*(W)172MM*(H)432MM N.W 2.85KG G.W 3.50KG
2、mini系列蜘蛛侠机箱
产品特点： 1、时尚的外观：面板采用先进的热转印工艺 印刷图案层次丰富、色彩鲜艳，再现性好，保 真度高,永不褪色，与时尚的家具配合起来更具 色彩。 2、兼容性强：小机箱，大心脏，可安装大板 大电源 3、散热性能超强：全方位立体化的散热设计， 后窗安装一个6寸风扇，再加上侧板的散热窗、 顶部和底部的散热孔，形成有效的散热体系， 使机箱的散热效果更佳。 4、优质的做工：钢琴烤漆箱体，SECC电解镀 锌钢板，卷边设计不易伤手，周边带有丰富 EMI弹片，加上侧板无喷漆，防辐射效果更为 突出。 5、热转印工艺:首开在机箱行业采用热转印工 艺，面板色感强烈，耐腐蚀，耐酸碱，图象清 晰,永不褪色.符合绿色环保印刷标准，无环境 污染。
产品参数 驱动位 5.25″×4（Ext） 3.5″×2（Ext） 3.5″×5(Int) 五金：SGCC 五金厚度：0.5mm 塑胶：PC/ABS 支持主板 : ATX/microATX PCI ：PCI ×7 Power：ATX 制冷风扇 前置风扇位：120mm×1 或 90mm×1 或 80mm×1 后置风扇位：90mm×1 或80mm×1 规格 产品规格：400X180X420mm 包装规格：470X230X470mm
5、炫风系列1203机箱
产品特点： 1、机箱整体简洁干净大方，面板的F1赛车图 案与机身浑然一体，时尚动感。 2、独特精巧的凹进面板外形设计,流畅的线条 挥洒时尚气息。 3、热转印工艺的面板，图案更加清晰艳丽， 色彩层次感强，永不褪色。 4、对流式散热设计(对流式散热比其它散热 方式温度降低2℃以上) 5、全方位散热，对硬盘、CPU、显卡等硬件 起全面保护。 6、机箱的面板包括五金全部采用全钢琴烤漆 工艺。 7、防电磁辐射，抗干扰。
4、加勒比海盗系列美人鱼机箱
产品特点 • 先进水转印工艺，效果逼真， 网点精细，色泽丰富，附着力强， 永不褪色。 • 六合一读卡器，能读取主流的 SD/microSD/MMC/XD/MS/TF/M2等主流 存储卡。 • 兼容性强，可安装大主板大电 源，配置随心。 • 立体化的散热设计，散热效果 极佳。 • 钢琴烤漆箱体，SECC电解镀锌 板，卷边设计不伤手，丰富EMI 弹片，防辐射效果突出。 • 人性化设计，光驱、电源开关、 复位键顶置设计，方便简洁.
产品参数 驱动位 驱动位5.25*1(EXT) 驱动位3.5*2（EXT\INT） 适用主板 ATX/MATX 材料五金：SECC 五金厚度：0.6mm 塑胶：PC/ABS 扩展条 7条 散热系统 后置风扇：60MM*1（最多可以按装2个 60MM风扇） 侧板风扇位：120MM*1 规格 产品规格 （L)385MM*(W)138MM*(H)352MM 包装规格 （L)390MM*(W)172MM*(H)432MM N.W 2.85KG G.W 3.50KG
产品参数 驱动位 5.25″×4（Ext）3.5″×2（Ext） 3.5″×5(Int) 适用主板 ATX/MATX 读卡器：六合一读卡器 兼容市 场上主流的SD/microSD/MMC/XD/MS/CF/M2等主流 存储卡条 后置风扇：80mm×1 或 80mm×2 侧面风扇：120mm×1 产品规格 （L）435mm×（W） 180mm×（H）410mm 包装规格 （L）465mm×（W） 230mm×（H）490mm N.W 4.2KG G.W 5.2KG
产品参数 驱动位 驱动位5.25*1(EXT) 驱动位3.5*2（EXT\INT） 适用主板 ATX/MATX 材料五金：SECC 五金厚度：0.6mm 塑胶：PC/ABS 扩展条 7条 散热系统 后置风扇：60MM*1（最多可以按装 2个60MM风扇） 侧板风扇位：120MM*1 规格 产品规格 （L)385MM*(W)138MM*(H)352MM 包装规格 （L)390MM*(W)172MM*(H)432MM N.W 2.85KG G.W 3.50KG
3、mini系列蓝心语机箱
产品特点： 1、时尚的外观：面板采用先进的热 转印工艺印刷图案层次丰富、色彩鲜 艳，再现性好，保真度高,永不褪色， 与时尚的家具配合起来更具色彩。 2、兼容性强：小机箱，大心脏，可 安装大板大电源。 3、散热性能超强：全方位立体化的 散热设计，后窗安装一个6寸风扇， 再加上侧板的散热窗、顶部和底部的 散热孔，形成有效的散热体系，使机 箱的散热效果更佳。 4、优质的做工：钢琴烤漆箱体， SECC电解镀锌板，卷边设计不易伤 手，周边带有丰富EMI弹片，加上侧 板无喷漆，防辐射效果更为突出。 5、热转印工艺:首开在机箱行业采用 热转印工艺，面板色感强烈，耐腐蚀， 耐酸碱，图象清晰,永不褪色.符合绿 色环保印刷标准，无环境污染。