Lync安装步骤
lync企业版部署
Lync企业版部署目录一、部署环境介绍 (4)二、部署准备 (4)1、软硬件要求 (4)2、更改IP地址 (6)1）更改DC的ip地址 (6)2）更改前端ip地址 (7)3）更改后端ip地址 (8)3、在DC中新建域 (9)4、更改计算机名，加入新建的域 (13)5、lync部署的先决条件安装 (14)6、创建主机A记录SRV记录以及为DC添加证书服务 (16)1）A记录 (17)2）SRV记录 (18)3）证书服务 (21)7、后端准备工作 (22)1）登录 (22)2）导入SQL安装包 (23)3）安装SQL数据库 (24)4)创建共享文件夹 (26)5）打开1433端口重启计算机 (27)三、开始部署 (28)1、登录 (28)2、安装lync server 2010 (29)3、开始部署 (30)1）准备Active Directory (30)2）添加administrator账户到CSAdministrator组 (32)3）安装拓扑生成器以及发布拓扑 (32)4）新建拓扑 (33)5）编辑拓扑 (41)6）发布拓扑 (43)7）配置中央管理器和安装组件 (45)8）请求分配证书 (49)9）启动服务 (56)10）检查服务 (57)四、lync测试 (58)1、登录lync server控制面板 (58)2、新建用户 (59)3、启用用户 (59)4、登录lync通信测试 (60)Lync企业版部署一、部署环境介绍首先需要3台装有Windows server 2008 R2 SP1（企业版）操作系统的计算机分别作为：DC、前端、后端其中：DC服务器ip：192.168.10.2前端服务器ip：192.168.10.5后端服务器ip：192.168.10.3（注：所有网关默认为192.168.10.1；前端和后端DNS服务器都需要指向DC服务器，即前端后端服务器DNS服务器地址为192.168.10.2）二、部署准备1、软硬件要求服务器CPU必须为以下之一:•64-bit dual processor, quad-core, 2.0 gigahertz (GHz) or higher•64-bit 4-way processor, dual-core, 2.0 GHz or higher建议内存16GB10,000转本地硬盘上的72GB可用空间双网卡, 均为千兆网卡更改计算机IP地址，建域，计算机更名加域。
中国石化统一通讯系统用户使用手册-Lync2010
中国石化即时消息系统-Lync 2010用户使用手册一、环境检查为了成功安装使用Lync 2010即时消息客户端，用户计算机必须满足下列条件：1)操作系统为Windows XP专业版SP3以上。
点击开始，右键点击“我的电脑”，选择“属性”，在“常规”选项卡下确认操作系统版本；2)安装了.Net Framework 3.5 SP1。
二、安装Lync 2010客户端以XP操作系统为例，根据以下步骤完成安装配置过程：1.双击Lync安装程序压缩包进行解压缩：2.解压完成后会弹出如下提示界面，若您的C盘空间不足500MB，请关闭本窗口并清理出足够空间后重试；若大于500MB，可按任意键继续：3.安装程序会首先为您导入证书并安装Microsoft .NET Framework4.0 ，此阶段无需用户干预：4.上一步完成后会自动弹出Lync 2010安装程序，点击“安装”继续：5.在确保所列程序中已打开的程序如Outlook, IE和Office(Excel、PowerPoint、Word)全部保存并关闭后，点击“是”：6.安装完成后点击“关闭”运行Lync，建议在安装完成后重新启动计算机：7.Lync客户端运行后界面如下图，按照提示格式输入登陆地址，用户名和密码进行登录，默认情况下，登陆地址应为中国石化电子邮件系统的email地址（如果尚未开通邮箱功能，则登陆格式为username@），密码为邮箱或者相应帐户的密码。
8.点击“更改”可以更改登录地址：9.点击菜单栏的“文件”-“注销”，则可以退出Lync客户端。
三、体验Lync 2010客户端3.1查找和添加联系人1.登录Lync，在“查找联系人”处输入要添加人的地址格式为：username@，在查找到的联系人图标上点击鼠标右键，选择“添加到联系人列表”，添加到组：2.对方将弹出如下提示：3.添加后即可在联系人列表中看到新添加的联系人，双击后即可进行对话、传送文件、共享信息和视频等。
Lync安装步骤
Lync安装步骤说明以下是lync软件说明，office必须是2007版或更高
1首先，以管理员的身份登陆电脑，安装证书文件
点安装证书
下一步
选择“浏览”，按下图操作。
完成证书安装
2跟据操作系统版本，选择对应版本软件，公司内windows2008为64位版本，其它的系统都是32位版本安装，一直点下一步，完成就可以了，如果安装失败，请先装安msxml6_x86.msi（32位）或
msxml6_x64.msi，
然后再重新装安lync软件，完成。
以下是安装截图
安装补丁
重新安装Lnyc软件，成功安装完成如下。
3执行updata_addressbook.bat文件，重新登陆就可以了。
4lync登陆都是邮箱名，登陆后，右下角如果有错误提示，
请安装软件列表中的office2007-kb936864-fullfile-x86-en-us.exe 登陆帐号是邮箱地址，如果电脑是加入域的，并用域帐号登陆，软件会自动登陆，如果电脑没有加入域，
请手动登陆
设置如下。
1.安装Lync Server 2013前的准备工作
1、安装Lync Server 2013前的准备工作一、实验环境拓扑的准备工作1.Lync Server 2013 分为两个版本：Lync Server 2013 Enterprise Edition 和Lync Server 2013Standard Edition。
主要差异是Standard Edition 不支持Enterprise Edition 的高可用性功能。
为实现高可用性，需要将多个前端服务器部署到一个池中，然后可以进行镜像运行SQL Server 的服务器。
使用Enterprise Edition，您可选择并置或定义独立中介服务器。
监控服务器和存档服务器可使用独立的运行SQL Server 的服务器。
或者，可以将数据库服务器上运行的SQL Server 实例用于前端服务器和池。
2.准备域环境，拓扑图如图所示，并规划IP地址设置：我们将开始Lync Server 2013企业版的部署，首先来介绍一下实验环境，本次部署使用四台虚拟机，一台为DC服务器（同时包含DNS服务器，Exchange Server 2013服务器和CA证书颁发服务器），一台为数据库服务器（SQL Server 2012），作为Lync Server 2013的后端存储，一台为Lync前端服务器（Lync Server 2013）。
操作系统全部采用Windows Server 2012数据中心版，数据库版本采用SQL Server 2012企业版。
3.首先把所有的Windows Server 2012服务器的防火墙关闭：二、DNS服务器的准备工作1.在正式部署Lync Server 2013之前，我们需要提前在DNS中创建Lync所需要的A记录和SRV记录，做好DNS记录的创建和规划，也是部署中比较重要的一项任务。
2.首先，我创建了Lync Server 2013所需要的一些A记录，如图所示：3.然后，继续创建SRV记录，根据官方文档要求，我创建了两条SRV记录，如图所示：4.首先我们在DNS服务器新建一条“其他新记录”：5.选择资源记录类型为“服务位置（SRV）”：6.配置如下图所示：7.以同样的方法在创建一条资源记录，如下图所示：三、CA服务器的准备工作在部署Lync Server 2013之前，要求我们的环境中有证书服务器，我们可以利用Windows 的CA服务来搭建自己的企业证书服务器，该服务器可以为Exchange/Lync/IIS等微软的服务器颁发证书。
lync安装教程
LYNC安装步骤1、下载lync客户端安装软件32位操作系统下载地址：ftp://192.168.200.20/办公软件/LYNC Client/LyncSetupMSDN_x86_中文.exe64位操作系统下载地址：ftp://192.168.200.20/办公软件/LYNC Client/LyncSetupMSDN_x64_中文.exe2、安装lync客户端安装路径可以根据个人喜好选择，点击“安装”，进入下一步。
安装的时间将根据机器的性能决定。
安装完成之后提示：已成功安装。
点击“关闭”按钮将启动lync，Lync登录之前，先导入证书3、下载证书证书下载地址：ftp:///%B0%EC%B9%AB%C8%ED%BC%FE/LYNC%20Client/lync2010.cer 4、导入证书点击“安装证书”按钮，开始导入证书。
点击下一步，选择“将所有的证书放入下列存储”，单击浏览，选择“受信任的根证书颁发机构”，单击“确定”。
单击“下一步”单击“完成”，这样就完成了证书的导入。
5、快速同步地址簿文件在命令提示符窗口下运行一下命令:Reg Add HKLM\Software\Policies\Microsoft\Communicator /v GalDownloadInitialDelay /tREG_DWORD /d 0 /flync客户端我们可以通过更改如下注册表值，让客户端马上下载GalContacts.db和GalContacts.db.idx这两个文件，可在命令提示符中输入如下命令：但当你的电脑中已经存在GalContacts.db和GalContacts.db.idx这两个文件时，还是需要等待1-60分钟时间比对和服务器ABS的区别，才会同步地址簿。
我们可以退出客户端，删除GalContacts.db和GalContacts.db.idx这两个文件，此时再登录时就能马上重新下载完整的地址簿文件GalContacts.db和GalContacts.db.idx。
LYNC安装
Lync Server 2010安装前的准备工作：1、安装的计算机加入到域并使用具有安装权限的域管理员帐户登录。
2、在服务器管理中添加功能，安装.Net Framework 3.5.1以及其必的相关组件。
开始安装Lync Server 2010首次安装Lync Server 2010时必须安装Microsoft Visual C++ 2008 Redistributable –x64，再弹出的提示中单击是即可（若已安装过，则会直接弹出Lync Server 2010安装向导），然后弹出安装Lync的核心组件和安装向导，选择好安装目录后，点击安装，之后会在相应的目录中创建程序相关的安装目录有文件。
之后接受License Agreement后点击“确定”，之后进入部署向导界面，选择“准备活动目录”。
首先运行“准备架构”，在“准备架构”窗口中点击“下一步”，然后点击“完成”，之后回到部署向导界面。
运行“准备当时林”，在“准备林”窗口中点击“下一步”，在“通用组位置”中选择“本地域”，然后单击“下一步”选择“完成”，之后回到部署向导界面。
运行“准备当前域”，在“准备域”窗口中点击“下一步”，然后点击“完成”回到部署向导界面。
在准备完活动目录后，点击向导窗口左上角的“部署”（中文版可能名为：配置），然后在欢迎的界面中选择右侧的“准备安装标准版的服务器”。
在打开的窗口中选择“下一步”，这一步骤是在安装SQL Server Express和安装Central Management Service，经过一段长时间的安装后，看到完成界面后点击“完成”。
在安装完成后也可以检查计算机是否已经安装了SQL Server的相关程序。
之后返回到Lync欢迎界面，选择右侧的“安装Topology Builer”，Topology Builer的安装很快就可以完成。
安装完成Topology Builer后，在Windows的所有程序中的Microsoft Lynv Server 2010目录中，选择Microsoft Lync Topology Builer，在打开的窗口中选择新建。
Lync Server 2013之初次安装
Lync Server 2013之初次安装原创作品，允许转载，转载时请务必以超链接形式标明文章原始出处、作者信息和本声明。
否则将追究法律责任。
/4042188/934400Lync 2013安装 1. IIS 7.5 role servicesThe following table indicates the required IIS 7.5 role servicesAdd-WindowsFeature Web-Server, Web-Static-Content, Web-Default-Doc, Web-Scripting-Tools, Web-Windows-Auth, Web-Asp-Net, Web-Log-Libraries, Web-Http-Tracing,Web-Stat-Compression, Web-Default-Doc, Web-ISAPI-Ext, Web-ISAPI-Filter,Web-Http-Errors, Web-Http-Logging, Web-Net-Ext, Web-Client-Auth, Web-Filtering, Web-Mgmt-Console,Web-Asp-Net,Web-Dyn-Compression, Web-Mgmt-Console，MSMQ-Server, MSMQ-Directory，Desktop-Experience, Web-Asp-Net45 –restart2. Configure File Storage1. Click Start, point to All Programs, point to Administrative Tools, and then click DFS Management.2. In the console tree of the DFS Management snap-in, right-click the namespace server (for example ), and then click Edit Settings.3. Select Shared Folder Permissions.4. Select Use Custom Permissions.5. For the Administrator group, select the following under Allow:a) Full Controlb) Changec) Read6. Click Apply, and then click OK.3. Install Lync Server Administrative Tools1. Log on as a local administrator (minimum requirement) to the computer where you want to install the administrative tools. If you are logged on as an a standard user on the Windows Vista or Windows 7 operating systems, and User Account Control (UAC) is enabled, you will be prompted for the local administrator or a domain equivalent user name and password.2. Locate the installation media on your computer, and then double-click \Setup\amd64\Setup.exe.3. If you are prompted to install the Microsoft Visual C++ 2008 distributable, click Yes.4. On the Microsoft Lync Server 2013 Preview Installation Location page, click OK. Change this path to another location or drive if you need to have the files installed to another location.5. On the End User License Agreement page, review the license terms, click I accept, and then click OK. This step is required before you can continue.6. On the Microsoft Lync Server 2013 Preview – Deployment Wizard page, click Install Topology Builder.7. When the installation successfully completes, click Exit.8.4. Run Schema Preparation1. Log on to a computer in the forest as a member of the Schema Admins group and with administrator rights on the schema master.2. Install Lync Server Core components as follows:a) From the Lync Server 2013 Preview installation folder or media, run Setup.exe to start the Lync Server Deployment Wizard.b) If you are prompted to install the Microsoft Visual C++ Redistributable, click Yes.c) The Lync Server 2013 Preview Setup dialog box prompts you for a location to install the Lync Server files. Choose the default location or Browse to a location of your choice, and then click Install.d) On the License Agreement page, check I accept the terms in the license agreement, and then click OK. The installer installs the Lync Server 2013 Preview Core Components.3. Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Management Shell.4. Run cmdletInstall-CsAdServerSchema5. Use the following cmdlet to verify that schema preparation ran to completion.Get-CsAdServerSchemaThis cmdlet returns a value of SCHEMA_VERSION_STATE_CURRENT if schema preparation was successful6. Wait for Active Directory replication to complete or force replication.5. Run Forest Preparation1. Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Management Shell.2. Run:Enable-CsAdForest -GroupDomain is my domain name3. To verify that forest preparation was successfulLog on to a computer that is joined to a domain as a member of the Domain Admins group in the forest root domain.1. Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Management Shell.2. Run:Get-CsAdForestThis cmdlet returns a value of LC_FORESTSETTINGS_STATE_READY if forest preparation was successful.6. Run Domain PreparationTo use cmdlets to prepare the domain1.Log on to any server in the domain as a member of the Domain Admins group.2.Install Lync Server Core components as follows:a. From the Lync Server 2013 Preview installation folder or media, run Setup.exe to start the Lync Server Deployment Wizard.b. If you are prompted to install the Microsoft Visual C++ Redistributable, click Yes.c. The Lync Server 2013 Preview Setup dialog box prompts you for a location to install the Lync Server files. Choose the default location or Browse to a location of your choice, and then click Install.d. On the License Agreement page, check I accept the terms in the license agreement, and then click OK. The installer installs the Lync Server 2013 Preview Core Components.3.Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Management Shell.4.Run:Enable-CsAdDomain -Domain If you do not specify the Domain parameter, the default is the local domain.5.To verify that domain preparation was successfulGet-CsAdDomain -Domain -GlobalSettingsDomainController If you do not specify the Domain parameter, the default is the local domain.This cmdlet returns a value of LC_DOMAINSETTINGS_STATE_READY if domain preparation was successful.7. Design the topology1. Log on to the computer where Topology Builder is installed as a member of the Domain Admins group and the RTCUniversalServerAdmins group.2. Start Topology Builder: Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Topology Builder.3. Start Topology Builder: Click Start, click All Programs, click Microsoft Lync Server 2013 Preview, and then click Lync Server Topology Builder.4. In Topology Builder, select New Topology. You are prompted for a location and file name for saving the topology. Give the topology file a meaningful name and accept the default extension of .tbxml. Click OK.5. Navigate to the location where you want to save the new topology XML file, enter a name for the file, and then click Save.6. On the Define the primary domain page, enter the name of the primary SIP domain for your organization, and then click Next.7. On the Specify additional supported domains page, enter the names of additional domains, if any, and then click Next.8. On the Define the first site page, enter a name and a description for the first site, and then click Next.9. On the Specify site details page, enter the location information for the site, and then click Next.10.On the New topology was successfully defined page, ensure the Open the New Front End Wizard when this wizard closes check box is selected, and then click Finish8. Define and Configure a Front End Pool1. In the Define New Front End Pool Wizard, on the Define the New Front End pool page, click Next.2. On the Define the Front End pool FQDN page, enter a fully qualified domain name (FQDN) for the pool you are creating, click Enterprise Edition Front End pool, and then click Next.3. On the Define the computers in this pool page, enter a computer FQDN for the first Front End Server in the pool, and then click Add. Repeat this step for any additional computers (up to eight) that you want to add to the pool, and then click Next.4. On the Select features page, select the check boxes for the features that you want on this Front End pool. For example, if you are deploying only instant messaging (IM) and presence features, you would select the Conferencing check box to allow multiparty IM, but would not select the Dial-in (PSTN) conferencing, Enterprise Voice, or Call Admission Control check boxes, because they represent voice, video, and collaborative conferencing features.a) Conferencing This selection enables a rich set of features including:i. IM with more than two parties in an IM session.ii. Conferencing, which includes document collaboration, application sharing, and desktop sharing.iii. A/V conferencing, which enables users to have real-time audio/video (A/V) conferences without the need for external services such as the Live Meeting service or a third-party audio bridge.b) Dial-in (PSTN) conferencing Allows users to join the audio portion of a Lync Server 2013 Preview conference by using a public switched telephone network (PSTN) phone without requiring an audio conferencing provider.c) Enterprise Voice Enterprise Voice is the Voice over IP (VoIP) solution in Lync Server 2013 Preview that allows users to make and receive phone calls. You would deploy this feature if you plan to use Lync Server 2013 Preview for voice calls, voice mail, and other functions that use a hardware device or a software client.d) Call admission control (CAC) CAC determines, based on available network bandwidth, whether to allow real-time communications sessions such as voice or video calls to be established. If you have deployed only IM and presence, CAC is not needed because neither of these two features uses CAC.e) Archiving Archiving provides a way for you to archive IM content, conferencing (meeting) content, or both that is sent through Lync Server 2013 Preview.f) Monitoring Monitoring Server enables you to collect numerical data that describes the media quality on your network and endpoints, usage information related to VoIP calls, IM messages, A/V conversations, meetings, application sharing, and file transfers, and call error and troubleshooting information for failed calls.5. On the Select collocated server roles page, you can to collocate the Mediation Server on the Front End Server or to deploy it as a stand-alone server.You can collocate the Mediation Server on the Front End pool.a) If you intend to collocate the Mediation Server on the Enterprise Edition Front End pool, ensure the check box is selected. The server role will be deployed on the pool servers.b) If you intend to deploy the Mediation Server as a stand-alone server, clear the appropriate check box. You will deploy Mediation Server in a separate deployment step after you completely deploy the Front End Server.6. The Associate server roles with this Front End pool page allows you to define and associate server roles with the Front End pool. The following role is available:Enable an Edge pool Defines and associates a single Edge Server or a pool of Edge Servers. An Edge Server facilitates communication and collaboration between users inside the organization and people outside the organization, including federated users.There are two possible scenarios that you can use to deploy and associate the server roles:For scenario one, you are defining a new topology for a new installation. You can approach the installation in one of two ways:a) Leave the check box clear and proceed with defining the topology. After you have published, configured, and tested the Front End and Back End Server roles, you can run Topology Builder again to add the role servers to the topology. This strategy will allow you to test the Front End pool and the server running SQL Server without additional complications from additional roles. After you have completed your initial testing, you can run Topology Builder again to select the roles you need to deploy.b) Select roles that you need to install, and then set up the hardware to accommodate the selected roles.For scenario two, you have an existing deployment and your infrastructure is ready for new roles or you need to associate existing roles with a new Front End Server:c) In this case, you will select the roles that you intend to deploy or associate with the new Front End Server. In either case, you will proceed with the definition of the roles, set up any needed hardware, and proceed with the installation.7. On the Define the SQL store page, do one of the following:a) To use an existing SQL Server store that has already been defined in your topology, select an instance from SQL store.b) To define a new SQL Server instance to store pool information, click New and then specify the SQL Server FQDNin the Define New SQL Store dialog box.c) To specify the name of a SQL Server instance, select Named Instance, and then specify the name of the instance.d) To use the default instance, click Default instance.e) To use SQL Mirroring, select Enable SQL mirroring and select an existing instance or create a new instance.8. On the Define the file share page, do one of the following:a) To use a file share that has already been defined in your topology, select Use a previously defined file share.To define a new file share, select Define a new file share, in the File Server FQDN box, enter the FQDN of the existing file server where the file share is to reside, and then enter a name for the file share in the File Share box.9. On the Specify the Web Services URL page, do one or both of the following:a) If you are configuring DNS load balancing, select the Override internal Web Services pool FQDN check box, enter the internal base URL (which must be different from the pool FQDN and could be, for example, internal-<your base URL>) in Internal Base URL.b) Optionally enter the external base URL in External Base URL. You would enter the external base URL to differentiate it from your internal domain naming. For example, your internal domain is , but your external domain name is . You would define the URL using the domain name. This is also important in the case of a reverse proxy. The external base URL domain name would be the same as the domain name of the FQDN of the reverse proxy. Instant messaging and presence does require HTTP access to the Front End pool.10. If you selected Conferencing on the Select Features page, on the Specify the WAC Server URL page enter the WAC server discovery URL.11. On the Define the SQL store for archiving page, select an existing instance or SQL Server, or define a new instance to store the data associated with archiving data.12. On the Define the SQL store for monitoring page, select an existing instance or SQL Server, or define a new instance to store the data associated with monitoring data.13. Click Next. If you defined other role servers on the Associate server roles with this Front End pool page, separate role configuration wizard pages will open to allow you to configure the server roles. For details, see the following: 14. If you did not select additional server roles to configure and deploy, or when you have finished the configuration of the additional role servers, click Finish.Setup 1Setup 2Setup 3Setup 4本文出自“阳光☆奋进”博客，请务必保留此出处/4042188/934400。
Lync 2010客户端使用手册
Lync客户端使用手册用户使用文档2011年9月15日文档修改记录目录1使用即时消息和状态 (1)1.1登录并开始工作 (1)1.2自定义您的联系信息 (2)1.3更改您的图片设置 (4)1.3.1隐藏您的联系人的图片 (4)1.3.2隐藏或更改您的图片 (4)1.4创建您的联系人列表 (5)1.5通过IM进行联系 (6)2使用语音和视频 (7)2.1选择音频设备 (7)2.2查找所需的人员 (7)2.3发出语音呼叫 (8)2.4开始电话会议 (8)2.5应答呼叫 (9)2.6邀请其他人加入对话 (9)2.7在IM对话中添加语音 (10)2.8使用呼叫控件 (10)2.9插入网络摄像机 (11)2.10在对话中添加视频 (11)3设置、开始和加入联机会议 (12)3.1安排联机会议或电话会议 (12)3.2更改会议访问和演示者选项 (12)3.3开始计划外会议 (13)3.4加入计划的联机会议或电话会议 (14)3.5加入计划外会议 (14)3.6设置音频首选项 (15)4共享桌面或程序 (15)4.1与其他人共享您的桌面 (16)4.2共享程序 (17)4.3共享P OWER P OINT 演示文稿 (17)4.4创建白板 (18)4.5为其他人授予控制权 (19)1使用即时消息和状态本节介绍了使用Microsoft® Lync™2010 通信软件进行通信的基础知识。
它说明了如何使用Lync 2010 方便地与工作场所的其他人进行交互和协作。
1.1登录并开始工作如果您已登录到您的组织的网络，请启动Lync以进行登录。
1)在Windows® 任务栏中，依次单击“开始”、“所有程序”、“Microsoft Lync”和“MicrosoftLync 2010”。
在打开Lync 主窗口时，如果看到您的姓名和状态，则说明您已登录。
2)单击您的姓名下面的可用性菜单，然后单击您的状态，或者单击“重置状态”，让Lync 根据您的活动和Microsoft® Outlook® 日历自动设置状态。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Lync安装步骤说明以下是lync软件说明，office必须是2007版或更高
1首先，以管理员的身份登陆电脑，安装证书文件
点安装证书
下一步
选择“浏览”，按下图操作。
完成证书安装
2跟据操作系统版本，选择对应版本软件，公司内windows2008为64位版本，其它的系统都是32位版本安装，一直点下一步，完成就可以了，如果安装失败，请先装安msxml6_x86.msi（32位）或
msxml6_x64.msi，
然后再重新装安lync软件，完成。
以下是安装截图
安装补丁
重新安装Lnyc软件，成功安装完成如下。
3执行updata_addressbook.bat文件，重新登陆就可以了。
4lync登陆都是邮箱名，登陆后，右下角如果有错误提示，
请安装软件列表中的office2007-kb936864-fullfile-x86-en-us.exe 登陆帐号是邮箱地址，如果电脑是加入域的，并用域帐号登陆，软件会自动登陆，如果电脑没有加入域，
请手动登陆
设置如下。