看书党必备：博阅最新款电纸书T62+首发开箱
TWN4 Multitech HF Mini 阅读器 MIFARE NFC 集成手册说明书
TWN4 MULTITECH HF MINI TWN4 Mini Reader MIFARE NFCINTEGRATION MANUALTABLE OF CONTENTS1INTRODUCTION (3)1.1ABOUT THIS MANUAL (3)1.2ABOUT TWN4 MULTITECH HF MINI (3)1.3ELATEC SUPPORT (3)1.4REVISION HISTORY (3)2SAFETY INFORMATION (3)3INTEGRATION INSTRUCTIONS (4)3.1GENERAL (4)3.2LIST OF APPLICABLE RULES (4)3.3SPECIFIC OPERATIONAL USE CONDITIONS (4)3.4LIMITED MODULE PROCEDURES (4)3.5TRACE ANTENNA DESIGN (4)3.6RF EXPOSURE CONSIDERATIONS (4)3.7ANTENNAS (4)3.8LABEL AND COMPLIANCE INFORMATION (5)3.9TEST MODES AND ADDITIONAL TESTING REQUIREMENTS (5)3.10ADDITIONAL TESTING, PART 15 SUBPART B DISCLAIMER (5)3.11MECHANICAL INSTALLATION (5)3.12ELECTRICAL CONNECTION (5)3.13PROGRAMMATION/SOFTWARE INTEGRATION (5)4COMPLIANCE STATEMENTS (6)4.1EU (6)4.2FCC (6)4.3IC (6)4.4RF EXPOSURE COMPLIANCE (6)5INTEGRATOR AND HOST REQUIREMENTS (7)APPENDIX (8)A – TERMS AND ABBREVIATIONS (8)B – RELEVANT DOCUMENTATION (8)1INTRODUCTION1.1ABOUT THIS MANUALThis integration manual explains how to integrate ELATEC RFID reader module TWN4 MultiTech HF Mini into a host device and is mainly intended for integrators and host manufacturers.The content of this integration manual is subject to changes without prior notice and printed versions might be obsolete. Integrators and host manufacturers are required to use the latest version of this integration manual.For the sake of better understanding and readability, this manual might contain exemplary pictures, drawings and other illustrations. Depending on your product configuration, these pictures might differ from the actual design of your product.1.2ABOUT TWN4 MULTITECH HF MINIELATEC TWN4 MultiTech HF Mini reader is designed for integration into machines, handheld computers or any other human interface devices such as displays, panels, etc. The focus has especially been set on size, flexibility and price. Thanks to its compact dimensions, integration directly on a PC board is possible.1.3ELATEC SUPPORTIn case of any technical questions, refer to the ELATEC website () or contact ELATEC technical support at:***********************1.4REVISION HISTORYVERSION CHANGE DESCRIPTION EDITION01 First edition(replaces Transponder Reader TWN4 Mini Reader MIFARE NFC Quick Start Guide)08/20212SAFETY INFORMATION•ELATEC TWN4 MultiTech HF Mini is an electronic component and should be installed exclusively by a trained and qualified personnel.•ELATEC recommends the integrators to follow general ESD protective measures during the installation of TWN4 MultiTech HF Mini into a host device, e.g. the use of an antistatic wristband or special gloves.•The integrator should not touch the antennas (if not shielded), printed circuit boards, connectors or other sensitive components on TWN4 MultiTech HF Mini.•Before installing TWN4 MultiTech HF Mini into a host device, the integrator should also make sure that he/she has read and understood the ELATEC technical documentation related to TWN4 MultiTech HF Mini, as well as the technical documentation related to the host device. In particular, the instructions and safety information given in the user manual of TWN4 MultiTech HF Mini should be read carefully and listed in the technical documentation of the host manufacturer as well, as soon as these instructions and safety information are required for a safe and proper use of the host device containing TWN4 MultiTech HF Mini.3INTEGRATION INSTRUCTIONS3.1GENERALTWN4 MultiTech HF Mini may be installed in any host devices, as long as it is operated under the operational conditions stated in the user manual and other technical documents (e.g. data sheet). TWN4 MultiTech HF Mini is equipped with one integrated antenna. Thus, no antenna installation is required.3.2LIST OF APPLICABLE RULESRefer to the approval certificates, grants and declarations of conformity issued for TWN4 MultiTech HF Mini, and to Chapter “Compliance Statements” for a detailed list of the rules applicable to TWN4 MultiTech HF Mini.3.3SPECIFIC OPERATIONAL USE CONDITIONSThere are no specific operational use conditions for TWN4 MultiTech HF Mini other than the conditions mentioned in the user manual and data sheet of TWN4 MultiTech HF Mini. The host manufacturer or integrator must ensure that these use conditions comply with the use conditions of the host device. In addition, these use conditions must be stated in the user manual of the host device.3.4LIMITED MODULE PROCEDURESRefer to the grant of equipment authorization or approval certificate issued for TWN4 MultiTech HF Mini for more information.3.5TRACE ANTENNA DESIGNn/a3.6RF EXPOSURE CONSIDERATIONSThe module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0 cm and any additional testing and authorization process as required.Refer to Chapter “Compliance Statements” for detailed information about the radio frequency exposure conditions applicable to TWN4 MultiTech HF Mini.These RF exposure conditions must be stated in the end-product manual(s) of the host product manufacturer.3.7ANTENNASTWN4 MultiTech HF Mini is equipped with the following antenna:TWN4 MultiTech HF Mini HF antenna (13.56 MHz)Dimensions: 27.5 x 25 mmNumber of turns: 4For more information, refer to the related product data sheet or other relevant technical documents.3.8LABEL AND COMPLIANCE INFORMATIONRefer to Chapters “Compliance Statements” and “Integrator and Host Requirements” for detailed label and compliance information.3.9TEST MODES AND ADDITIONAL TESTING REQUIREMENTSNo specific testing method has been defined by ELATEC for TWN4 MultiTech HF Mini.TWN4 MultiTech HF Mini has been tested and found in compliance with the specifications noted on the approval certificates and other relevant approval documents. However, the integrator is still responsible for any additional testing and authorization process required for the end product.Refer to the KDB Publication 996369 D04 Module Integration Guide of the FCC Office of Engineering and Technology (OET) for detailed information about test modes and additional testing requirements for the host device.3.10ADDITIONAL TESTING, PART 15 SUBPART B DISCLAIMERTWN4 MultiTech HF Mini is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. In addition, the final host product still requires Part 15 Subpart B compliance testing with TWN4 MultiTech HF Mini installed.3.11MECHANICAL INSTALLATIONThe module is plugged onto socket connectors. No further mechanical fixation is provided.3.12ELECTRICAL CONNECTIONPIN PIN NAME FUNCTION1 RESET- Low active TTL input with internal pull-up resistor for hard reset.2 PWRDWN- Low active TTL input with internal pull-up resistor for turning off the voltage regulator.3 GND Ground4 VIN Unregulated input to on-board voltage regulator.5 RXD- (USB: D+) Low active TTL input with internal pull-up resistor of asynchronous RXD to COM1. In case of USBversion: USB Data+6 TXD- (USB: D-) Low active TTL output (push/pull) of asynchronous TXD from COM1. In case of USB version: USBData-7 SCK SCK from SPI host interface8 SS- SS- from SPI host interface9 VCC Internally regulated 3.0V power supply. To be used for SAM1.10 SAM_IO I/O line for SAM1.11 GPIO3 GPIO3, I/O pin for general purposes.12 GPIO2 GPIO2, I/O pin for general purposes.13 GPIO1 GPIO1, I/O pin for general purposes.14 GPIO0 GPIO0, I/O pin for general purposes.15 SAM_CLK Clock output for SAM116 SAM_RST Reset output for SAM13.13PROGRAMMATION/SOFTWARE INTEGRATIONn/a4COMPLIANCE STATEMENTS4.1EUTWN4 MultiTech HF Mini is in compliance with the EU directives and regulations as listed in the respective declaration of conformity (cf. TWN4 Mini Reader MIFARE NFC EC Declaration of Conformity).4.2FCCThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.CautionThe Federal Communications Commission (FCC) warns the users that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC §15.105 (b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the Receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.FCC ID: WP5TWN4F154.3ICThis device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:(1) l’appareil ne doit pas produire de brouillage;(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.IC: 7948A-TWN4F154.4RF EXPOSURE COMPLIANCERF exposure statement (mobile and fixed devices)This device complies with the RF exposure requirements for mobile and fixed devices. However, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.5INTEGRATOR AND HOST REQUIREMENTS Authorization requirementsTWN4 MultiTech HF Mini has been certified as a module and does not need further approval, provided that the module is used in accordance with the FCC grant conditions and no limitations or usage conditions have been defined by ELATEC. However, the host manufacturer must ensure that the host device still complies with all applicable regulations after TWN4 MultiTech HF Mini has been integrated.In particular, the host integrator installing TWN4 MultiTech HF Mini into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.Labeling requirementsUsing a permanently affixed label, TWN4 MultiTech HF Mini must be labeled with its own FCC and IC identification numbers. In case this label is not visible anymore after integration of TWN4 MultiTech HF Mini in the host device, it is necessary to bring a label on the host device (on a visible and accessible place) stating the FCC and IC identification numbers of the integrated TWN4 MultiTech HF Mini:Contains FCC ID: WP5TWN4F15Contains IC: 7948A-TWN4F15In case several modules have been integrated into the host device, the label should state all FCC and IC identification numbers of the integrated modules.Example: “Contains FCC IDs: XXX-XXXXXXX, YYY-YYYYYYY, ZZZ-ZZZZZZZ”.Compliance statementsAll statements listed in Chapter “Compliance statements” of this integration manual must be also listed in the user manual of the host device.Special accessoriesWhere special accessories such as shielded cables and/or special connectors are required to comply with the emission limits, the instruction manual shall include appropriate instructions on the first page of the text describing the installation of the device.Simultaneous transmissionWhen the host product supports simultaneous-transmission operations the host manufacturer needs to check if there are additional RF exposure filing requirements due to the simultaneous transmissions. When additional application filing for RF exposure compliance demonstration is not required (e. g. the RF module in combination with all simultaneously operating transmitters complies with the RF exposure simultaneous transmission SAR test exclusion requirements), the host manufacturer may do his own evaluation without any filing, using reasonable engineering judgment and testing for confirming compliance with out-of-band, restricted band, and spurious emission requirements in the simultaneous-transmission operating modes. If additional filing is required please contact the person at ELATEC GmbH responsible for certification of the RF module.APPENDIXA – TERMS AND ABBREVIATIONSTERM EXPLANATIONhost device Also “host” or “host product”. Device in which an RFID module is intended to be installed for operation.Integrator Responsible party for the integration of an RFID module into a host device. The integrator might be the module manufacturer, the host manufacturer, the end user or any other third party.KDB Knowledge Databasemodular type Physical configuration in which a modular transmitter operates when installed within a host device. It can be a single-modular, a limited single-modular, a split-modular or a limited split-modular type.n/a Not applicableRFID (reader) module Device intended to be used within another device or product. Depending on the equipment configuration and intended use, an RFID module has to meet different requirements to get a modular grant.B – RELEVANT DOCUMENTATIONELATEC documentation•TWN4 MultiTech HF Mini data sheet•TWN4 MultiTech HF Mini functional description•TWN4 MultiTech HF Mini user manual•TWN4 MultiTech Mini technical handbookExternal documentationDocument name Document title/description Sourcen/a Technical documentation related to thehost product Host product manufacturer784748 D01 General labeling and Notification General Guidelines for Labeling andOther Information Required to beProvided to UsersFederal Communications CommissionOffice of Engineering and TechnologyLaboratory Division996369 D01 Module Equip Auth Guide Transmitter Module EquipmentAuthorization Guide Federal Communications Commission Office of Engineering and Technology Laboratory Division996369 D02 Module Q and A Frequently Asked Questions andAnswers about Modules Federal Communications Commission Office of Engineering and Technology Laboratory Division996369 D03 OEM Manual Guidance for Modular TransmitterInstruction Manuals and TCBCertification Application ReviewsFederal Communications CommissionOffice of Engineering and TechnologyLaboratory Division996369 D04 Module Integration Guide Modular Transmitter Integration Guide—Guidance for Host ProductManufacturersFederal Communications CommissionOffice of Engineering and TechnologyLaboratory DivisionRSS-Gen General Requirements for Compliance ofRadio Apparatus Innovation, Science and Economic Development CanadaRSS-102 Radio Frequency (RF) ExposureCompliance of RadiocommunicationApparatus (All Frequency Bands)Innovation, Science and EconomicDevelopment CanadaFor more information about this integration manual or TWN4 MultiTech HF Mini, go to or contact ELATEC.Elatec reserves the right to change any information or data in this document without prior notice. Elatec declines all responsibility for the use of this product with any other specification but the one mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names used in this document are registered trademarks of their respective owners.ELATEC GMBHZeppelinstr. 1 • 82178 Puchheim • Germany P +49 89 552 9961 0 • F +49 89 552 9961 129 • E-mail:********************。
九款电子阅读器测评 ： 亚马逊最佳
九款电子阅读器测评：亚马逊最佳作者：肖梅玲来源：《消费者报道》2014年第03期《测试》杂志上刊登了九款电子阅读器测试结果。
其中，冠军是亚马逊最新款Kindle Paperwhite 2，其他几款产品不相上下。
阅读器哪个好？随着阅读方式逐渐转变，选择一款好的阅读器是不少消费者的需求。
最近，德国商品基金会测试了九款电子阅读器，并在其《测试》杂志上刊登了测试结果。
其中，冠军是亚马逊最新款Kindle Paperwhite 2，其他几款主要产品不相上下。
然而，全球首款彩色电子书阅读器Pocketbook Color Lux表现却令人失望。
Kindle表现最佳亚马逊Kindle Paperwhite 2宣称自己是市场的领导者。
测试显示，该产品的显示器表现最好，屏幕对比度最佳，背光最均匀，而且是最容易操作的，书籍的打开速度非常快。
德国的Tolino Shine，在测试排名中紧跟其后。
接下来依次为Kobo Aura，Kobo Aura HD，Pocketbook Touch Lux，Sony PRS-T3，它们都表现良好，不相上下。
而Pocketbook Color Lux表现一般，Trekstor Pyrus 2 Led 表现最差。
Kindle Paperwhite 2屏幕尺寸为6英寸，分辨率为1024 x 758。
其显示屏表现非常优秀，电子书的文字和图片显示效果非常细腻，在图像质量方面，得分是0.9，趋近完美。
Kindle与德国竞争者Tolino Shine 2相比，两者地续航力都表现相当出色，在多功能和设计方面不相上下。
不过，前者还可以横向阅读，因此略胜一筹。
内部存储容量方面，前者为1.3G，后者为2.1G，且前者不能进行外部存储扩展。
但在电子书下载方面，Kindle却逊于Tolino Shine 2。
后者不但可以在设备上合并不同网上书店的电子书，还可以从公共图书馆借还电子书。
9款产品中，除了Sony PRS-T3之外，其他的电子阅读器均提供背光，即使在光线不足的情况下，也可以阅读。
Elatec TWN4 MultiTech HF Mini Reader 13.56MHz 无接触式
TWN4 MULTITECH HF MINI READER* 13.56MHz Contactless Reader/Writer*Previously known as TWN4 Mini Reader MIFARE NFCElatec’s TWN4 MultiTech HF Mini Reader is designed for integration into machines, handheld computers or any other human interface devices such as displays, panels, etc. The focus has especially been set on size, flexibility and price. Thanks to its compact dimensions, integration directly on a PC board is possible.The TWN4 Simple Protocol enables quick software development cycles. All host communication is done via USB or asynchronous serial CMOS/TTL interface. The module offers positions for placement of two LEDs that can be controlled by software.An external Secure Access Module (SAM) is supported for enhanced security and cryptographic performance. This enables the application to perform secure transactions.Key Features:▪ 3.15 –5.5 V DC▪Powerful SDK for writing Apps which are executed directly on the reader▪Infield Upgradeable▪Direct chip-commands support▪Onboard 18kB flash storage▪Compact design (33x30x11mm)▪Integrated antenna▪USB, Serial (logical level 3.3V, CMOS 5V tolerant), SPI2), Clock/Data3), Wiegand3), 1-Wire2)▪Firmware based on versatile TWN4 technology▪ 4 GPIOs▪Supports connection of ISO7816 compatible SAM cards▪Industrial operating temperature: -25°C to +80°C▪Pin Compatible Upgrade from Mini Reader T3MR-F▪Step Model Data on requestElatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names are registered trademarks.Elatec GmbH Zeppelinstr. 182178 PuchheimGermanyPhone: +49 89 5529961 0Fax:+49 89 5529961 129********************© 2015 Elatec GmbH –DocRev7 –08/2015Technical DataFrequency13.56 MHzHousing NoneDimensions (L x W x H)32.6mm x 30.1mm x 11.2mm / 1.28inch x 1.19inch x 0.44inchPower Supply 3.15 –5.5 V DCCurrent Consumption RF field on: typically 110mATemperature Range Operating: -25°C up to +80°C (-13°F up to +176°F)Storage: -40°C up to +85°C (-40°F up to +185°F)Read-/Write Distance Up to 7cm / 2.75inch depending on tag and environmentHOST Interface USB, serial (logical level 3.3V,CMOS 5V tolerant), SPI2), Clock/Data3), Wiegand3), 1-Wire2))OS Support Windows XP, Vista, Embedded CE2), 7(32-/64-bit), 8, 8.1,10,Linux, Android,iOS2), MAC OS X2) Transmission Speed HOST: USB: Full speed (12Mbit) AIR: up to 848Kbit/sModes of Operation▪USB keyboard emulation –USB virtual COM port –Transparent (direct chip-commands support)▪CCID and PC/SC 2.011)Relative Humidity5% to 95% non-condensingAntenna IntegratedSupported Transponders Standard▪13.56MHz / ISO14443A: MIFARE Classic, Classic 1k & 4k EV17), Mini, DESFire EV1, Plus S&X, Pro X8), SmartMX8), Ultralight, Ultralight EV17), Ultralight C, SLE44R35, SLE66Rxx (my-d move), LEGIC Advant5), PayPass8), NTAG2XX7)▪13.56MHz / ISO14443B: Calypso8)incl. Innovatron radio protocol 14443-B'6), CEPAS8), HID iCLASS5), Moneo8), PicoPass8), SRI512, SRT512, SRI4K, SRIX4K▪13.56MHz / ISO15693: EM4x338), EM4x358), HID iCLASS5), ICODE SLI, LEGIC Advant5), M24LR16/64, Tag-it, SRF55Vxx (my-d vicinity)8), PicoPass8)▪13.56MHz / ISO18092 / NFC: NFCIP-1: Active and passive communication mode, Peer-to-Peer, NFC Forum Tag Type 1-4, Sony FeliCa9)Version I10)Standard + HID iCLASS, HID iCLASS SE/SR/SEOS (CSN and Facility Code/PAC)6)Certifications CE, WEEE, RoHS-II compliantMTBF500,000 hoursWeight Approx. 4gTWN4 MultiTech HF Mini Reader Option USB Development Board TWN4 MultiTech HF Mini Reader Order CodeStandard Version I T4MR-FT4MR-F-IT4MR-F-UT4MR-F-UIT4MK-F, including T4MR-F1)In Preparation2)On Request Only3)External Interface Required5)UID Only6)UID Only, read/write On Request 7)r/w enhanced security features on request 8)r/w in direct chip command mode 9)UID + r/w public area 10) Version I requires external TWN4 SIO CardDrawing (Component Side)PinningPin spacing2.54mm Pin Name Description1RESET Hard reset (input, low active, logic level, internally pulled-up)2PWRDWN Turn off voltage regulator (input, low active, logic level, internally pulled-up) 3GND Ground(USB black wire)4VCC Power supply input(3.15 –5.5V, USB red wire)5RXD/USB+UART RXD/USB Data+ (USB green wire)6TXD/USB-UART TXD/USB Data-(USB white wire)7Res.Reserved for future use (SCK from SPI host interface).8Res.Reserved for future use (SS-from SPI host interface).9VSAM 3.0V regulated supply for SAM10SAM_IO Bidirectional SAM I/O line11GPIO3General purpose input/output312GPIO2General purpose input/output213GPIO1General purpose input/output114GPIO0General purpose input/output015SAM_CLK SAM clock output16SAM_RST SAM reset output。
博阅T61电纸书说明
博阅T61电纸书说明概述：博阅T61是一款专门用于显示书籍、杂志、报纸、期刊及其他电子文件的类纸阅读器，拥有环保、护眼、大容量、便携性、低能耗、高分辨率的特性。
产品简介：博阅T61是深圳市欣博阅科技有限公司生产的一款类纸阅读器，在性能配置、操作系统、阅读体验及屏幕显示效果上均表现卓越。
T61采用A9双核处理器，让电子阅读器在开机速度、运行速度、翻页速度等体验上更快。
屏幕显示清晰，不反光，无闪烁，无辐射，全视角阅读，强光可看。
它不仅拥有超大空间，可同时容纳上千本书，而且支持PDF、DOC、TXT、HTM、HTML、CHM等20多种文本格式，让阅读变得更轻松。
①产品特色：外观：博阅T61选用进口优质的材质，触手温润、细腻，亲肤手感极佳，搭配黑色外壳，尽显时尚优雅。
6寸轻巧机身，180克“体重”，长时间持握也毫无压力，让“书友”能够畅享阅读。
阅读器左右两侧采用双向翻页键，让阅读翻页更加灵活多变，操作自在随心。
处理器：博阅T61搭载全新A9 双核CPU，主频高达1.0GHZ，改善了以往电子阅读器开机慢、响应慢、翻页慢、刷新慢等各种“慢”节凑阅读操作，使看书操作更快、更灵敏，让性能更稳定，阅读体验更完美。
屏幕：博阅T61采用第三代高清E-INK电子墨水屏，拥有1024*758高分辨率，字迹清晰细致，字体明亮锐利，显示效果如纸书般真实、舒适，不刺激眼睛，长时间阅读也无视觉疲劳感，适合深度阅读。
操作系统：博阅T61搭载安卓4.2.2系统，兼容广大第三方软件，用户在使用时可以通过众多APP软件来进行更方便的阅读，在线阅读、书籍下载、导入等均可直接在阅读器上实现，方便快捷。
详细参数：处理器：双核ARM Cortex-A9,主频1GHz运行内存：512MB DDR3屏幕：6英寸第三代高清屏灰阶度：16级前光：支持触摸屏：电容式分辨率：1024*758存储：内置4G，最大支持32G TF卡数据传输：Micro USB2.0无线传输：WI-FI 802.11b/g电池：2000mAh聚合物锂电池外观尺寸：159*112*8.5MM重量：180g操作系统：Android 4.2.2文档格式：支持EPUB, PDF, FB2, MOBI, TXT, RTF,HTML, HTM, CHM, RTF, DOC/DOCX,XLS/XLSX, PPT/PPTX, PDB, DJVU, DJV,ZIP, RAR,7ZIP 等20多种文本文档格式图片浏览器：支持JPG, GIF, TIFF, BMP, PNG 等图片文档格式互联网浏览器：支持漫画压缩包：支持压缩包直接阅读，记录最近记录书籍查找：支持书籍排序：支持缩放：PDF、DJVU、OFFICE 支持5 级缩放，其它格式支持32 级缩放刷新模式：局部刷、黑白刷、全屏刷屏幕旋转：手动文件加密：Adobe DRM支持网络激活，PC 连接激活PDF页面自动适应：支持PDF流式、版式切换：支持自定义待机图片：支持自定义更换字体：支持自动翻页：支持脚注查看：支持全屏浏览：支持多国语言：支持80 多国语言省电模式：短休眠，深度休眠市场前景：在生活节奏快、时间碎片化成为当今社会的一种常态之后，人们的阅读习惯和阅读方式发生了翻天覆地的变化，快捷方便的数字化阅读成为人们普遍的阅读方式，从而催生了电子阅读器这一主要用于数字化阅读的阅读工具。
电子书 E读6202说明书
都可以随时观看，随时享受。
1、电源开关键 2、Home/主菜单键 3、Back/返回键 4、Page up/上一页 5、Page Down/下一页 6、数字快捷键 7、 搜索键 8、 旋转键 9、 音乐快捷键
外观及按键说明
10、TF 卡插槽 11、 缩小键 12、 放大键 13、复位键 14、USB 插孔 15、耳机插孔 16、 返回按钮 17、MENU 键
18、导航键：用来选择/确定项目
一、充电操作及电池管理
基本操作
使用前请将电池充满，当电池完全充放电两到三次后方可达到最佳状态。建议每次充电 3-4
存储书签：按 OK 键或对应的数字快捷键进入，选择到需保存的目录下再通过按 OK 键或对应 的数字快捷键即可选择位置保存当前的书签。 提取书签：按 OK 键或对应的数字快捷键进入，会出现之前保存的书签，选择到需调取的目录 下再通过按 OK 键或对应的数字快捷键即可进入阅读界面。（注：进入各子菜单的操作相同， 下面不在做叙述。） 删除书签：进入后会出现之前保存的书签，通过按 OK 键即可删除书签。 刷屏模式：进入后会出现“全部刷新”、“局部刷新”两项功能，按“ ”或“ ”键选择，在 通过按 OK 键或数字快捷键刷新，刷新后返回到阅读界面。 浏览模式：进入后可选择“手动模式”、“自动模式”，再通过按 OK 键或数字快捷键选择，选 择后回到阅读界面。 自动翻页：进入后可选择“10 秒”、“15 秒”、“20 秒”、“25 秒”、“30 秒”，再通过按 OK 键或 数字快捷键选择，确定后回到阅读界面。 语音设置：可通过短按开机键进入 TTS 朗读功能，然后进入语音设置里，其中有“发音人”、 “朗读风格”、“朗读音效”、“朗读速度”、“朗读语调”各子菜单，通过按 OK 键或数字快捷键 选择，按 键可返回到上一项。 （1）发音人：进入可选择中文普通话和美式英语，通过按 OK 键或数字快捷键可选择，按 键可返回到上一项。 （2）朗读风格：进入含有“一字一顿”、“平铺直叙”、“有声有色”各项，通过按 OK 键或数 字快捷键可选择，按 键可返回到上一项。 （3）朗读音效：进入可选择“正常”、“忽远忽近”、“回声”、“机器人”、“合唱”、“水下”、 “混响”、“阴阳怪气”等音效，通过按 OK 键或数字快捷键选择，按 键可返回到上一项。 （4）朗读速度：进入含有“-3X”、“-2X”、“-1X”、“0X”、“+1X”、“+2X” 、“+3X”等速度， 通过按 OK 键或数字快捷键可选择，按 键可返回到上一项。 （5）朗读语调：进入可选择“-3X”、“-2X”、“-1X”、“0X”、“+1X”、“+2X” 、“+3X”等语调， 通过按 OK 键或数字快捷键可选择朗诵语调，按 键可返回到上一项。 【注意】：PDF 格式文档不支持 TTS 功能朗读。 四、声乐播放 1、在主菜单下按“ ”、“ ”键选择“声乐播放”，按 OK 键或按数字快捷键进入音乐。按“Page Up” 与“Page Down”键可切换音乐列表的上一页或下一页。 （1）音量调节：通过按“ ”、“ ”键调节音量。 （2）播放/暂停：在播放界面下，按 OK 键可以播放或暂停当前音乐。 （3）上一曲/下一曲：按“ ”、“ ”键可以进行歌曲的上下曲操作。
【2018-2019】博阅电纸书笔记-word范文模板 (10页)
本文部分内容来自网络整理，本司不为其真实性负责，如有异议或侵权请及时联系，本司将立即删除！== 本文为word格式，下载后可方便编辑和修改！ ==博阅电纸书笔记篇一：看书党必备：博阅最新款电纸书T62+首发开箱一起惠返利网：电纸书技术Piggy也没有过多深入研究，作为一名消费者，直观的感受是最有效的。
只要让眼睛舒服，看书舒服，就是好的技术，至于技术的原理嘛……我们还是别浪费时间了，有这时间多读几本好书，受益匪浅。
说一下主要的参数吧。
这个我们还是要了解的，对我们的选择很有帮助。
6英寸分辨率1024X75、双核A9 1GHz、 512M RAM、 8G存储空间、电池近3000mAh 、有MP3和朗读功能，但没有外放。
支持WIFI 全屏触控实体按键前置光MicroUSB2.0 Android 4.2.2系统可Root。
好了，来看开箱——背面是一些主要的功能包装还是很精致的，比以前的版本好看我选T62+有一个原因是它的实体按键多，左边是刷新键、上一页、下一页，右边是返回键、上一页、下一页。
充电口，MicroUSB太通用了，家里随便一找一大堆此类数据线，以后充电数据不用愁。
左起依次是TF卡槽、充电口、RESET孔、耳机孔、电源键。
注：耳机孔不支持iPhone那种四极耳机，具体表现为声音会飘，不能插完全，慢慢调整是可以正常听音乐的，但是太麻烦了不推荐，最好是用国标或欧标的耳机。
一起惠返利网：简洁的背面，材质容易沾油和指纹。
来看看6寸的大小。
篇二：博阅T62电纸书阅读器用户群分析博阅T62电纸书阅读器用户群分析在互联网飞速发达的今天，人们的阅读倾向有所改变，网络文学、网络文化成为人类的精神食粮，也正因为这样，电纸书阅读器的出现因时改变了国民的阅读观念。
而纸质的读本市场反而受到了冷落，被人们挤到了角落里，成为了这个时代的被遗忘者。
这并不意味着是一个不乐观的事，从市场的另一面来看待这件事情，这是一件好事。
在国内，图书出版市场不是很景气，但电纸书阅读器市场却备受欢迎。
华为 揽阅M2 10.0 快速入门
C
电源键
M
上卡托
音量键
指纹功能
指纹管理
触控功能
笔夹
此功能需要应用支持。 功能键
Y
下卡托
CM
MY
xxxxx
橡皮擦 功能键
• 按住并在屏幕上画圈可 • 按住并双击屏幕可以截取
以截屏。
全屏。
CY
CMY
指纹感应器
K
笔尖
！ • M2-A01w 无上卡托，不可插入手机卡。 • 请勿遮挡环境光传感器，以免影响正常使 用。如需贴膜，请选用环境光传感器处有开孔的 专用贴膜。
• 若设备配有不可拆卸的内置电池。请勿自行更换电池，以免损 坏电池或设备。 电池只能由授权服务中心更换。
• 请按当地规定处理本设备、电池及其它附件，不可将它们作为 生活垃圾处理。 若电池处置不当可能会导致电池爆炸。
号不同， 产品可能不包括除主机外的以上所有部件， 请以产品实际销售配置为准。
说明：
主机 / 充电器 / 电池：单板 / 电路模块器件铜合金或高温焊料中含 铅； 电子元器件的陶瓷或玻璃中含铅； 集成电路倒装芯片中半导 体芯片及载体之间形成可靠性联接所用焊料中含铅； 单板上铆钉 的 铜合 金 中含 铅； 充 电器 插 头的 铜 合金 中含 铅， 电 路模 块 含铅； 电池中电路模块含铅。
在横屏状态下，使用任意手指触摸指纹感应器可以体 验多种触控功能，如长按返回桌面、向左滑动返回上 一级操作、向右滑动调出多任务界面。
通过分屏可以在两个窗口中查看不同的内容， 高效便捷。 长按最近键 ，或用两根手指从屏幕底部向上滑动，启 用分屏。
在分屏界面，点击或拖动 可以进行更多操作。
M-Pen 不仅可以代替手指方便地操控屏幕，还可以配合 特色应用给您带来手写、手绘的无限乐趣和高效体验。
华为 揽阅M2 10.0 用户指南
1关于本手册 (1)2快速上手 (2)指纹录入 (2)指纹识别 (2)指纹触控 (2)M-Pen 特色应用 (3)锁定与解锁屏幕 (3)认识通知与状态图标 (3)了解常见按键 (4)桌面快捷操作 (4)分屏 (7)3信息输入 (9)编辑文本 (9)切换输入法 (9)4网络连接 (10)通过WLAN 上网 (10)通过WPS 连接WLAN (10)通过移动数据网络上网（部分产品适用） (10)5网络共享 (11)通过WLAN 热点共享网络（部分产品适用） (11)通过USB 共享网络 (11)通过蓝牙共享网络（部分产品适用） (12)6联系人 (13)新建联系人 (13)同步联系人 (13)导入联系人 (13)备份联系人 (14)分享联系人 (14)7通话（部分产品适用） (15)拨打紧急电话 (15)召开电话会议 (15)将陌生号码添加到联系人 (15)清除通话记录 (16)8信息（部分产品适用） (17)搜索短信 (17)个性化设置短信 (17)9应用程序管理 (18)安装应用程序 (18)卸载和分享应用程序 (18)10多媒体 (19)魅我拍照 (19)延时摄影 (19)拍摄全焦照片 (20)拍摄全景照片 (20)拍照识物 (20)从相机导入照片 (21)查看照片或视频文件 (21)分享照片或视频 (22)相机扫描二维码 (22)图库识别二维码 (22)更换主题 (23)添加桌面小工具 (23)管理桌面 (24)设置铃声 (24)设置字体大小 (24)调节屏幕亮度 (24)设置文件保密柜 (25)设置隐私保护 (25)12文件共享 (26)通过WLAN 直连共享文件 (26)通过蓝牙共享文件 (26)多屏互动 (26)从电脑上拷贝文件 (29)13设置 (30)语音唤醒 (30)设置屏幕待机时长 (30)设置屏幕锁 (30)调整音量 (30)启用省电模式 (31)查看内存状态 (31)设置日期和时间 (31)格式化microSD 卡 (31)恢复出厂设置 (32)升级系统 (32)14个人信息和数据安全 (33)16法律声明 (38)1 关于本手册欢迎使用华为揽阅M2。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
电纸书技术Piggy也没有过多深入研究，作为一名消费者，直观的感受是最有效的。
只要让眼睛舒服，看书舒服，就是好的技术，至于技术的原理嘛……我们还是别浪费时间了，有这时间多读几本好书，受益匪浅。
说一下主要的参数吧。
这个我们还是要了解的，对我们的选择很有帮助。
6英寸分辨率1024X75、双核A9 1GHz、 512M RAM、 8G存储空间、电池近3000mAh 、有MP3和朗读功能，但没有外放。
支持WIFI 全屏触控实体按键前置光 MicroUSB2.0 Android 4.2.2系统可Root。
好了，来看开箱——
背面是一些主要的功能
包装还是很精致的，比以前的版本好看
我选T62+有一个原因是它的实体按键多，左边是刷新键、上一页、下一页，右边是返回键、上一页、下一页。
充电口，MicroUSB太通用了，家里随便一找一大堆此类数据线，以后充电数据不用愁。
左起依次是TF卡槽、充电口、RESET孔、耳机孔、电源键。
注：耳机孔不支持iPhone那种四极耳机，具体表现为声音会飘，不能插完全，慢慢调整是可以正常听音乐的，但是太麻烦了不推荐，最好是用国标或欧标的耳机。
简洁的背面，材质容易沾油和指纹。
来看看6寸的大小。
开机进系统，看的出这是个深度定制的Android 4.2.2系统，几乎看不出Android的影子。
来看看系统信息。
打开京东读书客户端。
打开京东、多看、布卡等等Android应用，都会比较淡，原因是因为这些应用是为Android手机设计和优化的，并没有为E Ink屏优化，所以看起来会有点淡，颜色浅怪怪的。
不过好在，不怎么影响阅读。
当然，最好的阅读效果就是原生E Ink上的阅读软件，字黑纸白，阅读会更舒服吧。
打开“京东读书”里面的书，可能从照片里看不怎么出来，实际上字会有点浅。
亮度调节，一共25级可调，这点确实好，我手上这台T62+不管调到哪一级亮度，背光都很均匀，看来比前代是改进了，我之前看到不少人反映T61和T62背光漏或者不均匀。
仔细看了一下四周，严格来说，顶部有一点漏光，但是并不严重，也不影响看书，而且几乎在90度下面才看的到，一
这张是隐藏了状态栏。
这张是没有隐藏状态栏。
有时候还是隐藏了比较好看书，但是带来一个新问题就是，状态栏没有了返回或回到主页就麻烦了点，回到主页就要按实体的“返回键”一步一步的返回了，如果厂家能多设计一个Home键该多好。
开箱也看完了，该说说优缺点了。
——
一起惠返利网：
优点：
1、系统流畅反应快，打开软件一般2-3秒就开了，翻页也很快，0.几秒就翻了，最好是把软件里面的翻页效果关了这样最快，比Kindle快多了。
2、实体按键多，这也是我选择它的原因之一。
3、存储空间大，有8G，还支持插内存卡。
4、能听歌，音质还算不错，能朗读。
5、Android系统，应用多，还有人装微信，金太阳看股票什么的……
6、能ROOT也是一个优点，这样就可以折腾啦。
7、性价比高，599送皮套送支架送电容笔等等等等一大堆东西，挺值的啦。
8、有背光，而且还是均匀的，漏光不严重可忽略，给它一个赞吧。
缺点：
1、屏幕不够白，不开背光有点绿。
2、很多Android应用字都很浅，其实这个跟博阅无关。
3、Android系统的问题，耗电，没有Kindle省电……不过对我来说够用了，几天一充。
我个人觉得还是挺满意的，我之前用过几个电纸书，最坑最贵的是那个汉王E920，当时快?3000买的，9寸，号称看PDF最爽，可实际上反应很慢，又没有背光，有笔但是太难用，又重又沉……说多了都是泪啊，从此再也不买汉王的东西，看看那个什么E人E本，这么土的外观，这么渣的配置，我朋友说买这个的要么是送礼的，要么是公家的钱，没有人会买来自用的。
PS：我已ROOT，装了一个软件，可以把指定的软件内置路径改为外置卡上，比如多看阅读，它下载的书默认是放在内置存储上的，超简单的修改后，它下载的书以后都自动存在我的TF卡了。
多看阅读有些书蛮大的几十M上百M这样子，我在手机上用多看，不知不觉，书籍都下了好几G了，日积月累，比较占地方，所以把它的书修改到外置TF 卡上比较好。
替换了字体为我多年前珍藏的黑体，从WM时代一直伴随着我，因为这个字体很清晰，而且字库超全，特殊字符也是超全的，我忘记截图了。
等下次补上。