AW9818TQR_产品手册
TOA 900系列产品说明书
A P P L I C A T I O N SA/V Rentals AirportsAudio/VisualAuditoriums / Theatres BanksBars / Lounges / Nightclubs Boardrooms Business MusicConference Facilities Convenience Stores Educational FacilitiesFitness Clubs / Gymnasiums Hotels / Hospitality Houses of WorshipIndustrial / Warehouses MuseumsMusic Distribution OfficesPublic Address Restaurants Retail Stores Theme Parks Training RoomsType8-channel mixer/pre-amplifier Output Power +4 dBm, +20 dBm (max.)Power Bandwidth 30 - 20k Hz, +20 dBm 0.5% THD 250 - 20k Hz, +18 dBm 0.5% THD Frequency Response 20 - 20k Hz, ±1 dBTotal Harmonic 0.01% at 1k Hz, rated outputDistortion Inputs8 input ports: every port accepts any input module 1 Bridging Input/OutputInput Sensitivity Input port #1 to #8: 100 mV / 10k Ω& Impedance Bridging Input/Output: 100 mV / 3.3k ΩOutputsMain: Balanced, 150/600 ΩAux: Unbalanced, 10k Ω, 0 dBm Output RegulationLess than 1.5 dB, no load to full load (1k Hz)Dynamic RangeMaster volume set to min.:90 dB (Band Pass: 20 - 20k Hz,Master volume set to max.:77 dBwith T one Controls centered)T one Controls Bass: ±10 dB at 100 Hz; Treble: ±10 dB at 10k Hz Indicators Normal, Peak, Power, Protect, and Signal LEDs ProtectionSelf-protection, with internal AC fuses Power Consumption 18 WTemperature Range 12°F to 140°F (-10°C to +60°C)ColorBlackDimensions (W x H x D)16.5” x 3.9” x 12.1” (420 x 99.1 x 307.5 mm)Weight (without modules)11.7 lbs (5.3 kg)Other FeaturesOutput connects approx. 5 seconds after switching power on.900 SERIESMIXER/PRE-AMPLIFIER Tel:800-733-7088 Fax:Visit to download:900 Series Architect and Engineering Specifications 900 Series Installation Manual 900 Series CAD Files900 Series Module Guide900 SERIESMIXER/PRE-AMPLIFIER Tel:800-733-7088 Fax:800-733-9766 TOA EL E C T R O N I C S, I N C.601 G ATEWAY B LVD., S UITE300S OUTH S AN F RANCISCO, CA 94080TEL: 800-733-7088FAX: 800-733-9766900S ERIESFemale Male1/4”RCA Dual RCA 3 Screw 5 Screw RemovableThe two types of muting modules,MUTE-RECEIVE and MUTE-SEND,have mute function circuitry that connects to two common "MUTE" buses,and one common "GROUND" bus when installed in an A-900MK2 mixer/amplifier or M-900MK2 mixer/pre-amplifier.A "BUS" is simply an internal wire that connects from module-slotto module-slot.You can access these buses via rear-panel screw terminals,labeled,"MUTE 1","MUTE 2" and "GND".Mute-type modules connect to both mute buses "out-of-the-box".You can disconnect the module's mute function circuitry from each mute bus by cutting jumper wires on the modules.This allows you to configure systems with multiple levels of priority.MUTE-RECEIVE modules respond to mute bus activation in either of two ways:1) Switch Activation:Connecting a switch closure between the "MUTE" (1 or 2)" and "GND" screw terminals on the rear of the mixer/amplifier activates the mute function circuitry of MUTE-RECEIVE modules connected to the same bus.This is also referred to as "manual muting".2) Auto-Mute:When input signal level to a MUTE-SEND module exceeds a user-adjustable threshold,the module's mute function cir-cuitry activates the mute function circuitry of all MUTE-RECEIVE modules connected to the same bus.This is also referred to as "signal-activated muting".M UTING M ODULESLiterature Order #: L-M900SERIESSpecifications subject to change without notice.© 2003, TOA Electronics, Inc.。
阿布拉康网络转换器产品说明书
ALANC100014.6 x 3.4 x 3.5 mmRoHS/RoHS II CompliantMSL Level = 1Request Samples Check InventoryPart Number Insertion Loss(dB Max)Return Loss (dB Min) 1-100 MHz100-200MHz 1-40 MHz40 -200MHzALANC10001-EEB30.81.22514.5Part NumberInductance (uH Min) Leakage Inductance (uH ) Interwinding Capacitance (pF Max) DC Resistance (Ω Max) Hi Pot (VAC) Weight (g) Test Condition @100kHz, 0.1V, 0mA DC Bias@ 100KHz, 0.1V@ 100KHz, 0.2VPins 1-2 Pins 4-5 60 sec. Per Piece ALANC10001-EEB31500.5351.21.215000.228ALANC10001 series is RoHS/ RoHS II Compliant and Pb free. Moisture Sensitivity Level (MSL) – Level 1Applicable Standards: IEEE 802.3u and 802.3ab Operating Temperature: -40˚C ~ +85˚CStorage Condition: -40˚C ~ +85˚C (on board),• Uniform transformer windings • Fully automated production lines • Meets IEEE 802.3u and 802.3ab standards • Compatible with 10 BASE-T, 100 BASE-TX and 1000 BASE-T • Symmetric Orientation • Operating temperature range up to -40°C to +85°C •RoHS Compliant•1CT:1CT Transformer • Fast and gigabit Ethernet • Servers, switches and routers• IP cameras, surveillance, and phone • Access points• Industrial computers and robotics • Networking and communications • Broadcast video •Set top boxFeaturesElectrical Specifications @25ºCApplicationsALANC10001 4.6 x 3.4 x 3.5 mmRoHS/RoHS II CompliantMSL Level = 1Request Samples Check InventoryALANC10001 -Marking Method = Ink MarkingOperating Temp. D: -40°C ~ +85°CSchematic EB3Package Size E:6-Pin Packaging T: 2.0K pcs/reel B: BulkPart Identification Polarity MarkingALANC10001 4.6 x 3.4 x 3.5 mmRoHS/RoHS II CompliantMSL Level = 1Request Samples Check InventoryE: 6-pinDimensions: mmA B C 4.60 ±0.203.40 ±0.20 3.50 ±0.20Coplanarity 0.10 MAXMechanical SpecificationsRecommended Land PatternALANC10001 4.6 x 3.4 x 3.5 mmRoHS/RoHS II CompliantMSL Level = 1Request Samples Check Inventory6 - Pin EB3SchematicALANC10001 4.6 x 3.4 x 3.5 mmRoHS/RoHS II CompliantMSL Level = 1Request Samples Check InventoryZone Description Temperature Times 1 Preheat T SMIN ~ T SMAX 150°C ~ 200°C60 ~ 120 sec. 2 Reflow T L 217°C 60 ~ 150 sec. 3Peak heatT P 260°C20 ~ 40 sec. MAXReflow ProfileALANC100014.6 x 3.4 x 3.5 mmRoHS/RoHS II CompliantMSL Level = 1Request Samples Check InventoryTape and Reel: 2,000 pcs/reel Pieces Per Carton: 20,000 pcs Weight Per Carton: 6 kg (approx.)Dimensions of Carton:345 x 345 x 220 mmDimensions: mmA0 B0 W E F P0 P1 P2 D0 T K0 3.704.9012.00 1.75 5.50 4.00 8.00 2.00 1.50 0.40 3.70PackagingALANC10001 4.6 x 3.4 x 3.5 mmRequest Samples Check InventoryRoHS/RoHS II CompliantMSL Level = 1 Dimensions: mmATTENTION:Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.。
MR-900T用户使用手册说明书
MR-900T 4G路由器使用手册北京北科驿唐科技有限公司北京市海淀区丰贤中路7号北科产业园3号楼2层TEL: 4008-909-611网址：©版权所有2005-2022目录第一章产品介绍 (2)1.1 产品简介 (2)1.2 产品外观 (3)1.3 标准配件 (4)1.4 安装尺寸 (6)1.5 工作原理 (7)1.6 规格参数 (7)1.6.1 技术参数 (7)1.6.2 指示灯说明 (8)1.6.3 串口定义 (8)1.7 技术优势 (9)1.8 典型应用 (10)第二章设备配置 (12)2.1 配置方法 (12)2.1.1 准备工作 (12)2.1.2 配置MR-900T (12)2.2 配置参数介绍 (18)2.3 恢复出厂设置 (19)2.4 固件更新 (19)2.5 远程配置 (21)附录1：配置MR-900T实现高速上网 (28)附录2：驿云网口通实现点到中心案例 (33)附录3：驿云网口通实现点到点案例 (41)附录4：驿云串口通调试案例 (46)附录5：MR-900T以VPN的方式实现远程接入局域网 (51)附录6：APN专网调试案例 (55)附录7：用路由器网口收发短信及短信数据格式 (63)附录8：用路由器串口收发短信 (67)附录9：路由器网口AT命令 (70)附录10：网口通结合驿唐工业路由器虚网映射功能实现下位机设备相同IP地址的远程访问 (71)第一章产品介绍本章主要介绍MR-900T的外观、配件、规格参数和使用原理。
1、产品简介2、外观3、标准配件4、安装尺寸5、工作原理6、规格参数7、技术优势8、典型应用1.1产品简介MR-900T高速4G路由器工作在LTE-TDD/LTE-FDD网络下，具有高速上网与高速视频、数据传输能力。
在LTE-TDD网络下，MR-900T理论上的上行速率可达18Mbps，下行速率可达61Mbps。
在LTE-FDD网络下，MR-900T理论上的上行速率可达50Mbps，下行速率可达100Mbps。
亿佰特(Ebyte)-915MHz无线收发模块E07-868MS10用户手册(CC1101)
电气参数
E07-915MS10
E07-915MS10是成都设计生产的一款体积极小、贴片型的915MHz 无线模块，发射功率10mW，SPI 接口，收发一体，体积极小。
支持开发低功耗，目前已经多种场景中广泛应用，目前已经稳定量产，并适用于多种应用场景。
E07-915MS10采用美国德州仪器TI 公司原装进口的CC1101射频芯片设计开发，全进口工业级元器件，全无铅工艺，性能稳定，绕射性强，硬件的专业设计使模块体积极小，便于各种嵌入开发，可接弹簧天线或是外部天线。
注意事项
E07-915MS10
*我司提供Altium designer 封装库请前往官网下载或联系我们索取
软件编程E07-915MS10
系列产品E07-915MS10
包装
E07-915MS10
E07-915MS10采用静电袋和卷带两种包装方式。
通常，样品或者小批量发货为静电袋包装，批量或者特殊需求发
货为卷带。
【卷带包装示例】
*关于卷带卷带信息和自动焊接的更多信息请联系技术支持。
LG BD670 蓝光播放器 用户手册说明书
装在书架或其它架子上，除非能够充分通风或
者制造商的说明书中允许这样安装。
4 开始
开始
此设备配备便携式电池或蓄电池。
版权声明
从设备中拆下电池或电池组的安全方法：
yy 由于 AACS（先进内容接收系统）是受蓝光光
按照与装配时相反的顺序拆下旧电池或电池
盘 格式的内容保护系统认可, 和 DVD 格式的
组。为防止污染环境或对人和动物的健康构成
yy 多制式彩色电视机根据输入信号自动切换彩 色制式。如果彩色制式不自动切换，关闭再 打开电视机，以在屏幕上显示正常图像。
yy 即使以 NTSC 彩色制式录制的光碟可以正常 显示在电视机上，也不一定能够正确录制在 您的录像机上。
开始 5
1
开始
6 目录
目录
1 开始
3 安全信息 8 介绍 8 – 可播放的光碟和本手册中使用的符号 9 – 关于“7”符号显示 10 – 文件要求 11 – AVCHD（Advanced Video Codec High
yy 根据录制软件和封盘方式，某些光碟 （CD-R/RW、DVD±R/RW 或者 BD-R/RE） 可能无法在本设备上播放。
yy 使用由个人电脑和 DVD 或 CD 刻录机刻 录的 BD-R/RE、DVD±R/RW 和 CD-R/RW 光碟时，如果碟片受损或变脏，或者播 放器光头上有脏物或湿气凝结，则可能 无法播放这些碟片。
根据您购买此产品的时间，此产品在操作和限
光、明火或类似环境中。
制方面会有所不同。这是因为此产品生产后，
小心：本设备不能暴露在水中，也不能滴入或
AACS 可能会采用和/或更改这些限制。
溅入水分。也不能将任何装有液体的物品如花 瓶放置在设备上。
亿佰特-CC1101 小体积RF SPI无线模块E07-433M20S型号产品用户使用指导手册
产品概述
E07 系列基于 CC1101 的成都设计生产的体积极小、多种封装的无线模块，默认发射功率为 10mW；也有内置 PA 的模块，发射功率到达 100mW。Sቤተ መጻሕፍቲ ባይዱI 接口， 收 发一体，可以工作在 433MHz、868 MHz、915 MHz 主流ISM 频段，支持开发低功耗，目前已经多种场景中广泛应用。该模块目前已经稳定量产， 并适用于多 种应用场景（特别是酒店电子门锁）。
1.3.1. 发射功率 4
1.3.2. 接收灵敏度
4
1.3.3. 推荐工作频率.......................................................................................................................................................................................... 5 1.4. 距离测试..........................................................................................................................................................................................................5 2. 机械特性..................................................................................................................................................................................................................5 2.1. E07 (M1101S)/ E07 (868MS10)/E07 (915MS10)..........................................................................................................................................5 2.2. E07 (M1101D-TH)/E07 (M1101D-SMA)......................................................................................................................................................6 2.2. E07 (433M20S)................................................................................................................................................................................................ 7 3. 生产指导..................................................................................................................................................................................................................8 3.1. 回流焊温度...................................................................................................................................................................................................... 8 3.2. 回流焊曲线图.................................................................................................................................................................................................. 8 4. 常见问题..................................................................................................................................................................................................................9 4.1. 通信距离很近.................................................................................................................................................................................................. 9 4.2. 模块易损坏...................................................................................................................................................................................................... 9 5. 重要声明..................................................................................................................................................................................................................9 6. 关于我们..................................................................................................................................................................................................................9
ZTE ZXV10_W901 用户手册
第五章 无线配置 ............................................................................................................12
无线设定 .............................................................................................................................. 12 瘦 AP 设定 ........................................................................................................................... 15 VAP（虚拟多 AP）设定 ....................................................................................................15
策 编 * *
划 著 *
市场中心工程部
多媒体&终端产品规划部
多媒体&终端产品规划部 *
责任编辑 赵家伟 中兴通讯股份有限公司 地址：深圳市高新技术产业园科技南路中兴通讯大厦 邮编：518057 技术支持网站： 客户支持中心热线： （+86755） 26770800 传真： （+86755） 26770801 E-mail： 800@ * * * * 800-830-1118
第六章 接入控制 ............................................................................................................21
TBS1000C 系列示波器 用户手册说明书
TBS1000C 系列示波器用户手册077-1580-01Copyright © Tektronix.保留所有权利。
许可软件产品由 Tektronix、其子公司或提供商所有，受国家版权法及国际条约规定的保护。
Tektronix 产品受美国和外国专利权（包括已取得的和正在申请的专利权）的保护。
本文中的信息将取代所有以前出版的资料中的信息。
保留更改技术规格和价格的权利。
TekVPI 和 e*Scope 是 Tektronix, Inc. 的注册商标。
TEKTRONIX 和 TEK 是 Tektronix, Inc. 的注册商标。
泰克联系信息Tektronix, Inc.14150 SW Karl Braun DriveP.O. Box 500Beaverton, OR 97077USA（美国）有关产品信息、销售、服务和技术支持：■在北美地区，请拨打 1-800-833-9200。
■其他地区用户请访问查找当地的联系信息。
目录TEKTRONIX SOFTWARE LICENSE AGREEMENT (vii)重要安全信息 (xiii)常规安全概要 (xiii)产品上的符号和术语 (xvi)合规性信息 (xvii)EMC 合规性 (xvii)安全标准 (xviii)环境注意事项 (xx)前言主要特点 (1)本手册中使用的约定 (1)安装打开示波器包装 (3)操作要求环境要求 (7)电源要求 (8)TPP0100、TPP0200 系列 10X 无源探头信息 (8)将探头连接到示波器 (8)补偿探头 (9)将探头连接到电路 (9)标配附件 (10)可选附件 (11)技术规格 (11)性能图 (11)熟悉示波器打开示波器电源 (13)更改用户界面语言 (15)更改日期和时间 (20)受支持的探头类型 (24)进行测量时减少静电损坏 (25)进行功能检查 (25)什么是 Autoset（自动设置）（自动设置查询） (29)探头和接地导线端部 (29)获得设置的屏幕帮助 - 各功能帮助 (30)信号路径补偿 (SPC) (33)示波器简介功能 (34)采样示波器概念采样和采集概念 (35)采集模式概念 (37)触发概念 (38)触发斜率和电平概念 (39)可用触发类型 (40)触发耦合 (41)触发模式 (41)自动“未触发滚动”触发模式 (41)正常触发模式 (42)释抑触发模式 (42)触发延迟采集模式 (42)设置通道输入参数设置输入信号耦合 (43)反转输入信号 (44)设置示波器带宽 (45)设置探头类型（电压或电流） (46)设置探头衰减系数 (47)快速将探头衰减系数设置为 1X 或 10X (48)为电压探头设置测量电流模式 (49)设置输入信号垂直偏置 (50)设置波形垂直位置 (51)垂直位置和垂直偏置之间的差异 (51)设置通道相差校正 (52)相差校正提示 (53)触发设置在波形边沿上触发 (55)根据特定脉冲宽度触发 (57)发生欠幅脉冲时触发 (59)设置触发模式 (61)使用辅助输入触发外部信号 (62)采集设置使用自动设置 (63)自动设置提示 (64)如何启用/禁用示波器中的自动设置 (65)如何更改自动设置密码 (66)开始和停止采集 (68)设置采集模式 (69)设置采集触发延迟时间 (70)设置记录长度 (72)使用滚动显示模式 (73)滚动模式提示 (74)将示波器设置为出厂默认值 - 默认设置 (75)波形显示设置显示和删除波形 (77)设置波形余辉 (78)波形余晖提示 (79)XY 显示模式 (80)XY 显示模式提示 (81)设置背光亮度 (82)分析波形进行自动测量 (83)自动测量提示 (84)进行测量屏幕截图 (85)屏幕截图测量提示 (86)自动测量描述 (87)频率测量描述 (87)时间测量描述 (88)幅度测量描述 (90)面积测量描述 (91)仅对波形的一部分进行测量（选通） (92)如何启用/禁用示波器中的测量 (94)使用光标进行手动测量 (96)光标类型 (100)如何启用/禁用示波器中的光标 (101)创建数学波形 (103)数学波形提示 (104)使用 FFT 查看信号频率信息 (105)FFT 提示 (109)关于 FFT 窗口 (110)FFT 和显示波形假波现象 (112)显示参考波形 (113)参考波形提示 (113)如何查看长记录长度波形（缩放） (114)如何平移波形 (115)如何更改测量密码 (116)保存数据将屏幕图像保存到文件 (119)关于已保存图像文件格式 (120)保存波形数据 (120)保存示波器设置信息 (121)使用 Save File（保存文件）按钮将文件保存至 USB (123)关于波形数据文件 (124)调出数据调出示波器设置信息 (125)调出波形数据 (126)使用 USB 文件辅助功能文件辅助窗格概述 (129)更改 U 盘上的默认文件保存位置 (131)默认保存文件夹位置规则 (132)在 U 盘上新建文件夹 (132)文件夹创建提示 (133)从 U 盘上删除文件或文件夹 (133)在 U 盘上重命名文件或文件夹 (135)文件、文件夹重命名提示 (136)关于自动生成文件名称 (136)图像设置和波形文件提示 (136)从示波器内存中清除数据 (TekSecure)设置或查看 USB 设备端口参数禁用 USB 设备端口 (139)选择与 USB 设备端口连接的设备 (140)查看 USBTMC 信息 (141)附录Installing new firmware on the oscilloscope (143)运行诊断测试 (144)有关仪器的教学和培训的课件 (146)课件文件内容信息 (146)从 U 盘中加载课件文件 (147)处理错误消息 (148)运行课件实验实例 (148)保存课件实验结果 (150)示波器控件 (151)导航控件 (151)水平控件 (154)触发控件 (155)垂直控件 (155)使用菜单系统 (156)前面板连接器 (160)后面板连接器 (160)图形用户界面元素 (161)标记通道 (167)保证技术规格 (169)清洁 (169)日常保养 (169)清洁 (169)默认示波器设置（默认设置） (170)不会由默认设置重置的示波器设置 (171)物理固定示波器 (172)环境注意事项 (172)产品报废处理 (172)设备回收 (172)TEKTRONIX SOFTWARE LICENSE AGREEMENTThis End User Agreement (“Agreement”) is an agreement between Tektronix,Inc., an Oregon corporation, and its corporate affiliates, subsidiaries, anddivisions as applicable (collectively, “Tektronix,”“we,”“us,” or“our”) and You (including any entity or organization you represent,collectively, “Customer” or “You”). Please read this Agreement carefully asthis Agreement governs the terms and conditions under which You are permittedto use Tektronix’s software and services.THE SOFTWARE, ENCODED OR INCORPORATED WITHIN EQUIPMENTOR ACCOMPANYING THIS AGREEMENT, IS FURNISHED SUBJECT TOTHE TERMS AND CONDITIONS OF THIS AGREEMENT. BY INDICATINGYOUR ACCEPTANCE OF THESE TERMS BY SELECTING AN "ACCEPT”OR SIMILAR BUTTON IN A SOFTWARE MENU, OR BY RETAINING THESOFTWARE FOR MORE THAN THIRTY DAYS OR USING THESOFTWARE IN ANY MANNER YOU (A) ACCEPT THIS AGREEMENTAND AGREE THAT YOU ARE LEGALLY BOUND BY ITS TERMS; AND(B) REPRESENT AND WARRANT THAT: (I) YOU ARE OF LEGAL AGETO ENTER INTO A BINDING AGREEMENT; AND (II) IF YOU ARE AREPRESENTATIVE FOR A CORPORATION OR OTHER LEGAL ENTITY,YOU HAVE THE RIGHT, POWER, AND AUTHORITY TO ENTER INTOTHIS AGREEMENT ON BEHALF OF SUCH ENTITY AND BIND SUCHENTITY TO ITS TERMS. IF YOU DO NOT AGREE TO THE TERMS OFTHIS AGREEMENT, TEKTRONIX WILL NOT AND DOES NOT LICENSETHE SOFTWARE TO YOU AND YOU MUST NOT DOWNLOAD,INSTALL, OR USE THE SOFTWARE. UNITED STATES GOVERNMENTCUSTOMERS OR END-USERS MAY REQUEST A GOVERNMENTADDENDUM TO THIS AGREEMENT.NOTWITHSTANDING ANYTHING TO THE CONTRARY IN THISAGREEMENT OR YOUR ACCEPTANCE OF THE TERMS ANDCONDITIONS OF THIS AGREEMENT, NO LICENSE IS GRANTED(WHETHER EXPRESSLY, BY IMPLICATION, OR OTHERWISE) UNDERTHIS AGREEMENT TO ANY SOFTWARE THAT YOU DID NOT ACQUIRELAWFULLY OR THAT IS NOT A LEGITIMATE, AUTHORIZED COPY OFTEKTRONIX’S SOFTWARE. THIS AGREEMENT EXPRESSLYEXCLUDES ANY RIGHTS CONCERNING SUCH ILLEGITIMATE COPIES.IF THESE TERMS ARE NOT ACCEPTABLE, THE UNUSED SOFTWAREAND ANY ACCOMPANYING DOCUMENTATION SHOULD BERETURNED PROMPTLY TO TEKTRONIX (WITHIN 30 DAYS OFPURCHASE) FOR A FULL REFUND OF THE LICENSE FEE PAID. (FORINFORMATION REGARDING THE RETURN OF SOFTWARE ENCODEDOR INCORPORATED WITHIN EQUIPMENT, CONTACT THE NEARESTTEKTRONIX SALES OFFICE.)DEFINITIONS“Equipment” means Tektronix equipment that the Software is encoded orincorporated within or installed onto.LICENSESubject to the terms and conditions of this Agreement, Tektronix grants You anon-exclusive, non-transferable license to the Software, as followsTEKTRONIX SOFTWARE LICENSE AGREEMENTYou may:e the Software with the Equipment, or if the Software is not encoded orincorporated in any Tektronix equipment, on no more than one machine at atime; and2.Copy the Software for archival or backup purposes, provided that no morethan one (1) such copy is permitted to exist at any one time, and providedthat each copy includes a reproduction of any patent or copyright notice orrestrictive rights legend that was included with the Software, as receivedfrom Tektronix;3.Fully transfer the Equipment to a third party but only if prominentlyaccompanied by this End User License Agreement, and such third-partyrecipients agree to be bound by the terms of this Agreement; and4.Integrate Tektronix products that contain the Software into a system and sellor distribute that system to third parties, provided that those third parties arebound by the terms of this Agreement, and provided that You (i) do notseparate the Software from any Equipment it is incorporated into, (ii) do notretain any copies of the Software, and (iii) do not modify the Software.You may not:e the Software other than for its intended purpose as provided above in thesection “You may,” or in conflict with the terms and restrictions of thisAgreement;2.Distribute or transfer the Software to any person or organization outside ofYour organization without Tektronix’s prior written consent, except inconnection with a permitted use authorized in “You may” paragraphs 3 or4 above;3.Decompile, decrypt, disassemble, or otherwise attempt to derive the sourcecode, techniques, processes, algorithms, know-how, or other information(collectively “Reverse Engineer”) from the Software or permit or induceany third party to do so, except to the limited extent allowed by directlyapplicable law or third party license (if any), and only to obtain informationnecessary to achieve interoperability of independently created software withthe Software;4.Modify, translate, adapt, or create derivative works of the Software, or mergethe Software with any other software;5.Copy the documentation accompanying the Software;6.Remove any copyright, trademark, or other proprietary notices from theSoftware or any media relating thereto; or7.Export or re-export, directly or indirectly, the Software or Equipment, anyassociated documentation, or systems created in accordance with “Youmay” section 4 above, to any country to which such export or re-export isrestricted by law or regulation of the United States or any foreigngovernment having jurisdiction without the prior authorization, if required, ofthe Office of Export Administration, Department of Commerce, Washington,D.C. and the corresponding agency of such foreign government;e the Software or Equipment in any manner or for any purpose thatinfringes, misappropriates, or otherwise violates any intellectual propertyrights or other proprietary rights of any person, or any applicable laws;e the Software or Equipment in a network or system with other products orservices that are incompatible, insecure or not compliant with applicablelaws;10.Bypass, circumvent, damage or otherwise interfere with any security or otherfeatures of the Software or Equipment designed to control the manner inwhich they are used, or harvest or mine Tektronix’s proprietary content or information from the Software or Equipment.THE SOFTWARE MAY NOT BE USED, COPIED, MODIFIED, MERGED, OR TRANSFERRED TO ANOTHER EXCEPT AS EXPRESSLY PERMITTED BY THESE TERMS AND CONDITIONS.FEEDBACKIf You provide feedback to Tektronix concerning the functionality and performance of the Software or Equipment, including without limitation identifying potential errors and improvements, any comments, questions, suggestions, or the like ("Feedback"), Tektronix is free to use such Feedback without any attribution, compensation, or restriction in any manner to improve or enhance its products, irrespective of any other obligation or limitation between the Parties governing such Feedback. You hereby grant Tektronix an irrevocable, worldwide, perpetual, royalty-free license to use Your Feedback for any purpose whatsoever and waive any moral rights You may have in the Feedback. Tektronix is not obligated to use Your Feedback.OWNERSHIPTitle to the Software and all copies thereof, but not the media on which the Software or copies may reside, shall remain with Tektronix or others from whom Tektronix has obtained a respective licensing right.GOVERNMENT NOTICEIf the Software or any related documentation is acquired by or for an agency of the U.S. Government, the Software and documentation shall be considered “commercial computer software” or “commercial computer software documentation” respectively, as those terms are used in 48 CFR §12.212,48 CFR §227.7202, or 48 CFR §252.227-7014, and are licensed with only those rights as are granted to all other licensees as set forth in this Agreement.TERMThe license granted herein is effective until terminated. The license may be terminated by You at any time upon written notice to Tektronix. The license may be terminated by Tektronix if You fail to comply with any term or condition and such failure is not remedied within fifteen (15) days after notice hereof from Tektronix. Upon termination by either party, You shall return to Tektronix or destroy, the Software and all associated documentation, together with all copies in any form.IF YOU TRANSFER, DISTRIBUTE, OR OTHERWISE MAKE AVAILABLE ANY COPY, MODIFICATION, OR MERGED PORTION OF THE SOFTWARE WITHOUT THE AS EXPRESS PERMISSION OF THESE TERMS AND CONDITIONS OR PRIOR WRITTEN CONSENT OF TEKTRONIX, YOUR LICENSE WILL BE IMMEDIATELY AND AUTOMATICALLY TERMINATED.LIMITED WARRANTYTektronix does not warrant that the functions contained in the Software will meet Your requirements or that the operation of the Software will be uninterrupted, secure, or error-free.EXCEPT AS SEPARATELY PROVIDED IN A WRITTEN WARRANTY FROM TEKTRONIX, THE SOFTWARE IS PROVIDED “AS IS”WITHOUT ANY WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, QUIET ENJOYMENT, AND NON-INFRINGEMENT.THE SOFTWARE IS NOT DESIGNED OR INTENDED FOR USE IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL-SAFE PERFORMANCE INCLUDING WITHOUT LIMITATION, IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, WEAPONS SYSTEMS, DIRECT LIFE-SUPPORT MACHINES, OR ANY OTHER APPLICATION IN WHICH THE FAILURE OF THE SOFTWARE COULD LEAD TO DEATH, PERSONAL INJURY OR SEVERE PHYSICAL OR PROPERTY DAMAGE (COLLECTIVELY "HAZARDOUS ACTIVITIES"). TEKTRONIX AND ITS AFFILIATES, LICENSORS, AND RESELLERS EXPRESSLY DISCLAIM ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HAZARDOUS ACTIVITIES.LIMITATION OF LIABILITYIN NO EVENT SHALL TEKTRONIX, ITS AFFILIATES, LICENSORS, OR RESELLERS BE LIABLE FOR: (1) ECONOMICAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, WHETHER CLAIMED UNDER CONTRACT, TORT OR ANY OTHER LEGAL THEORY, (2) LOSS OF OR DAMAGE TO YOUR DATA OR PROGRAMMING, LOSS OF PROFITS, BUSINESS INTERRUPTION, OR OTHER PECUNIARY LOSS ARISING FROM THE USE OF (OR INABILITY TO USE) THE SOFTWARE, (3) PENALTIES OR PENALTY CLAUSES OF ANY DESCRIPTION, (4) ANY DAMAGE, CLAIMS, OR LOSSES RESULTING FROM THE USE OF THE SOFTWARE IN CONJUNCTION WITH OTHER PRODUCTS OR SERVICES (INCLUDING THIRD-PARTY PRODUCTS OR SERVICES); OR (5) INDEMNIFICATION OF YOU OR OTHERS FOR COSTS, DAMAGES, OR EXPENSES RELATED TO THE GOODS OR SERVICES PROVIDED UNDER THIS LIMITED WARRANTY, EVEN IF TEKTRONIX OR ITS AFFILIATES, LICENSORS, OR RESELLERS HAVE ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SOME OF THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU, BUT THEY SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY LAW. NOTWITHSTANDING ANYTHING HEREIN TO THE CONTRARY, IN NO EVENT SHALL TEKTRONIX’S TOTAL AGGREGATED LIABILITY TO YOU FOR ALL DAMAGES IN ANY ONE OR MORE CAUSES OF ACTION EXCEED THE AMOUNT RECEIVED BY TEKTRONIX FROM YOU FOR THE SOFTWARE OR EQUIPMENT.You are solely responsible for Your data. You must back up Your data before Tektronix or a third party performs any remedial, upgrade, or other work on Your systems, including any Equipment. If applicable law prohibits exclusion of liability for lost data, then Tektronix will only be liable for the cost of the typical effort to recover the lost data from Your last available back up.SECURITY DISCLAIMERThis Software and its associated Equipment are not designed or intended to be used with unsecure networks. You acknowledge that use of the Equipment may rely upon certain networks, systems, and data communication mediums that are not controlled by Tektronix and that may be vulnerable to data or security breaches, including, without limitation, internet networks used by Your internet providers and the databases and servers controlled by Your internet providers. Tektronix shall not be liable for any such breaches, including without limitation, damages and/or loss of data related to any security breach, and disclaims all warranties, including any implied or express warranties that any content will be secure or not otherwise lost or altered.For the avoidance of doubt, if You choose to connect this Software or Equipment to a network, it is Your sole responsibility to provide and continuously ensure a secure connection to that network. You agree to establish and maintain appropriate measures (e.g., firewalls, authentication measures, encryption, anti-virus applications, etc.) to protect the Software and Equipment and any associated data against security breaches including unauthorized access, destruction, use, modification, or disclosure. Notwithstanding the foregoing, You shall not use any Products in a network with other products or services that are incompatible, insecure or not compliant with applicable laws.THIRD-PARTY DISCLAIMERThe Software may contain software owned by third parties and obtained under a license from those parties (“Third Party Software”). Your use of such Third Party Software is subject to the terms and conditions of this Agreement and the applicable Third Party Software licenses. Except as expressly agreed otherwise, third parties do not warrant the Third Party Software, do not assume any liability with respect to its use, and do not undertake to furnish any support or information relating thereto.GENERALUnless the Customer is the United States Government, this Agreement contains the entire agreement between the parties with respect to the use, reproduction, and transfer of the Software, and shall be governed by the laws of the state of Oregon.You shall be responsible for any taxes that may now or hereafter be imposed, levied or assessed with respect to the possession or use of the Software or the rights and licenses granted under this Agreement, including any sales, use, property, value added, and excise taxes, and similar taxes, duties, or charges. Any waiver by either party of any provision of this Agreement shall not constitute or be deemed a subsequent waiver of that or any other portion.You may not assign this Agreement or any right or obligation under this Agreement, or delegate any performance, without Tektronix’s prior written consent. This section does not prohibit You from transferring the Equipment in accordance with Subsections 3 and 4 of the Section titled “You may” above.All questions regarding this Agreement should be directed to the nearest Tektronix Sales Office.重要安全信息本手册包含用户必须遵守的信息和警告，以确保安全操作并保证产品安全。
福禄克 Fluke 1736 和 1738 三相电能质量记录仪 用户手册 说明书
September 2015, Rev. 2, 1/20 (Simplified Chinese)©2015-2020 Fluke Corporation. All rights reserved.All product names are trademarks of their respective companies.1736/1738Power Logger用户手册有限保证和责任限制在正常使用和维护条件下，Fluke 公司保证每一个产品都没有材料缺陷和制造工艺问题。
保证期为从产品发货之日起二（2）年。
部件、产品修理和服务的保证期限为90 天。
本项保证仅向授权零售商的原始买方或最终用户提供，并且不适用于保险丝和一次性电池或者任何被Fluke 公司认定由于误用、改变、疏忽、意外非正常操作和使用所造成的产品损坏。
Fluke 公司保证软件能够在完全符合性能指标的条件下至少操作90 天，而且软件是正确地记录在无缺陷的媒体上。
Fluke 公司并不保证软件没有错误或无操作中断。
Fluke 公司仅授权零售商为最终客户提供新产品或未使用过产品的保证。
但并未授权他们代表Fluke 公司提供范围更广或内容不同的保证。
只有通过Fluke 授权的销售商购买的产品，或者买方已经按适当的国际价格付款的产品，才能享受Fluke 的保证支持。
在一个国家购买的产品被送往另一个国家维修时，Fluke 公司保留向买方收取修理/更换零部件的进口费用的权利。
Fluke 公司的保证责任是有限的，Fluke 公司可以选择是否将依购买价退款、免费维修或更换在保证期内退回到Fluke 公司委托服务中心的有缺陷产品。
要求保修服务时，请与就近的Fluke 授权服务中心联系，获得退还授权信息；然后将产品连同问题描述寄至该服务中心，并预付邮资和保险费用（目的地离岸价格）。
Fluke 对运送途中发生的损坏不承担责任。
在保修之后，产品将被寄回给买方并提前支付运输费（目的地交货）。
Foscam FI8918W 中文说明书
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
第 1 行 LED 驱动端口 第 2 行 LED 驱动端口 第 3 行 LED 驱动端口 第 4 行 LED 驱动端口 第 5 行 LED 驱动端口 第 6 行 LED 驱动端口 第 7 行 LED 驱动端口 第 8 行 LED 驱动端口 第 9 行 LED 驱动端口 第 10 行 LED 驱动端口 第 11 行 LED 驱动端口 VBAT 电源输入引脚 第 7 列驱动 LED 扫描端口 第 6 列驱动 LED 扫描端口 第 5 列驱动 LED 扫描端口 第 4 列驱动 LED 扫描端口 第 3 列驱动 LED 扫描端口 第 2 列驱动 LED 扫描端口 第 1 列驱动 LED 扫描端口 时钟输入、输出引脚 I2C 器件地址选择 I2C 数据总线 I2C 时钟总线 地电平 VDD 电源输入引脚 外部电容引脚 中断输出引脚，低电平有效 关断控制，低电平有效 地电平
绝对最大额定值（注 1）
参数
电源电压 VDD 电源电压 VBAT SCL, SDA, SHDN, INTN, CLKIO 最大功耗 （PDmax，package@ TA=25℃）
封装热阻 θJA 最大结温 TJmax 存储温度范围 引脚温度 （焊接 10 秒） ESD 范围 (注 2) HBM，所有引脚 Latch-up
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
引脚名称 描述
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 VBAT C7 C6 C5 C4 C3 C2 C1 CLKIO AD SDA SCL GND VDD CAP INTN SHDN GND
y CLKIO 引脚可输出内部 OSC 时钟 （4MHz）、或选择外部输入时钟
y TQFN4X4-28L 封装 y 需 VDD （ 2.4V ～ 3.3V ） 和 VBAT
（3.4V～5.5V）两个工作电源
封装引脚图
CLKIO
C5
C4
C3
C2
C1
AD
R7
R6
R5
R4
R3
R2
R1
版权所有© 2014 上海艾为电子技术有限公司 第 1 页 共 22 页
AW9818 产品手册 2014 年 05 月 V1.1
版权所有© 2014 上海艾为电子技术有限公司 第 6 页 共 22 页
AW9818 产品手册 2014 年 05 月 V1.1
I2C 接口
AW9818 通过 I2C 接口与主芯片通信，支持两种模式：标准模式（100kHz）和快速模式（400kHz）。 AW9818 作为从机连接在 I2C 总线上。SCL 为单向输入口；SDA 为双向输入/输出口。当 SDA 做 输出时，为开漏输出模式，需外接上拉电阻。
起始和停止条件 SCL 为高电平时，SDA 从高电平驱动成低电平表示 I2C 接口的起始条件。SCL 为高电平时，
SDA 从低电平驱动成高电平表示 I2C 接口的停止条件。所有的传输都被停止条件或重复起始条件 所终止。
SDA
SCL S/Sr
S: 起始条件 Sr：重复起始条件
P：停止条件
数据传输 在起始条件产生之后，I2C 总线发送一个从机的器件地址。当 AW9818 接收了起始条件之后，
+IT：+450mA -IT：-450mA
注1: 如果器件工作条件超过上述各项极限值，可能对器件造成永久性损坏。上述参数仅仅是工作 条件的极限值，不建议器件工作在推荐条件以外的情况。器件长时间工作在极限工作条件下，其可 靠性及寿命可能受到影响。
注2: HBM 测试方法是存储在一个的 100pF 电容上的电荷通过 1.5 kΩ 电阻对引脚放电。测试标准： MIL-STD-883H Method 3015.8
时拉低 SDA。AW9818 在接收每一字节数据之后会产生一个应答。
版权所有© 2014 上海艾为电子技术有限公司 第 7 页 共 22 页
AW9818 产品手册 2014 年 05 月 V1.1
在读操作时，从机 AW9818 先发送 8 位数据，然后释放 SDA 并检测 SDA 线上的应答。如果 检测到应答，且主机没有发送停止条件，则从机将继续发送数据。如果未检测到应答，则从机将停 止发送数据并等待停止条件。
fSCL tHD:STA tLOW tHIGH tSU:STA tHD:DAT tSU:DAT
tR tF tSU:STO tBUF tSP Cb
最小
0.6 1.3 0.6 0.6 0 0.1
0.6 1.3 0
典型
200
最大
400
0.3 0.3
400
单位
kHz μS μS μS μS μS μS μS μS μS
典型应用图
VIO 4.7Kohm x 3
VDD VBAT
1uF
1uF
VDD VBAT
C1
C2
INTN
C3
C4
SCL
C5
BB
SDA
C6
SHDN
C7
CLKIO
R11
AW9818 R10
R9
R8
R7
R6
1uF CAP
R5
R4
AD
R3
GND
GND
R2
R1
AW9818 产品手册 2014 年 05 月 V1.1
Ron
PMOS 导通电阻
OSC
fosc
OSC 时钟频率
CLKIO 引脚
VOH VOL VIH VIL
AD 引脚
输出逻辑高电平 输出逻辑低电平 输入逻辑高电平 输入逻辑低电平
VIH VIL
SHDN 引脚
输入逻辑高电平 输入逻辑低电平
VIH
输入逻辑高电平
VIL
输入逻辑低电平
tdeglitch
SHDN 信号去毛刺时间
AW9818 每完成一次呼吸，INTN 引脚输出中断 请求。该功能用来同步主控芯片与 AW9818 之 间 LED 呼吸时间。 I2C 接口支持 1.8V 通信。提供 SHDN 引脚关断、 内部软件关断功能。
AW9818 可配置输出内部时钟(4MHz)、或外部 时钟输入，允许多个 AW9818 级联控制。 AW9818 为 TQFN4X4-28L 封装，需提供 VDD （2.4V～3.3V）和 VBAT（3.4V～5.5V）两个 工作电源。
版权所有© 2014 上海艾为电子技术有限公司 第 3 页 共 22 页
参数
电源电压和电流
VDD
IO 端口输入电源电压
VBAT
LED 驱动输入电源电压
IVBAT_PD
VBAT 电源关机电流
IVDD_PD
VDD 电源关机电流
LED 驱动
ILED_MAX每路 来自ED 最大电流Iout
默认输出电流
PMOS 开关
等待接收从机地址。若 I2C 总线发送的器件地址与 AW9818 器件地址相同，则该从机器件将拉低 SDA 以应答。
数据有效性
当 SCL 为高电平时，SDA 必须保持固定电平。除了起始条件和停止条件以外，SDA 电平只 能在 SCL 为低时才能改变。
SDA
SCL
数据线稳定 数据 数据有效 允许改变
应答 应答表示 I2C 总线数据传送成功：当主机发送了 8bits 数据后，必须释放 SDA；从机在应答
nS pF
SDA tBUF
SCL
tLOW
tR
tHIGH
tF
Stop
Start tHD:STA
tHD:DAT
tSU:DAT
tSU:STA Start
VIH VIL tSP
VIH VIL
tSU:STO
Stop
版权所有© 2014 上海艾为电子技术有限公司 第 5 页 共 22 页
引脚定义及功能描述
引脚序号
推荐工作条件（VBAT>VDD, TA=-40℃~85℃）
VDD VBAT
参数
VDD 输入电压 VBAT 输入电压
条件
TA=-40℃~85℃ TA=-40℃~85℃
范围
2.4 ~ 3.3 3.4 ~ 5.5
单位
V V
电气特性
测试条件：TA=25℃，VDD=2.8V, VBAT＝4.2V（除非特别说明）
测试标准：JEDEC STANDARD NO.78B DECEMBER 2008
AW9818 产品手册 2014 年 05 月 V1.1
范围
-0.3V to 3.6V -0.3V to 5.5V -0.3V to VDD
3.2 W 31℃/W 125℃ -65℃ to 150℃ 260℃
±4000V
订购信息
产品型号
工作温度范围
封装形式
器件标记
AW9818TQR
-40℃～85℃ TQFN4X4-28L
AW9818
AW9818
装运方式 R：Tape & Reel 封装方式 TQ：Thin QFN
发货形式 卷带包装 3000 片/盘
版权所有© 2014 上海艾为电子技术有限公司 第 2 页 共 22 页
发送方 数据输出
接收方 数据输出
主机
1
送出时钟
起始条件
不应答（NACK）
应答（ACK）
2
8
9
应答时钟
地址字节 AW9818 提供一个器件地址引脚 AD，这允许一个 I2C 总线最多可同时使用 2 个 AW9818 器件。
从机器件地址为 7bits，加 1bit 读写判断位 R / W （总共 8bits）在起始条件之后被首先传输。如果 所传输的从机器件地址与 AW9818 器件地址相符合，该 AW9818 将拉低 SDA 产生应答。