核心交换机下vlan端口划分

1-3 vlan7
4-7 vlan2

1、检查是否有这个vlan:
dis cur
vlan batch 2 to 100 //vlan1到vlan100

2、进入到端口模式下，修改成access端口，并且属于某个vlan
[ServerHuiJu1]inter GigabitEthernet 0/0/1
[ServerHuiJu1-GigabitEthernet0/0/1]

[ServerHuiJu1-GigabitEthernet0/0/1]port link-type access

[ServerHuiJu1-GigabitEthernet0/0/1]port default vlan 7

[ServerHuiJu1-GigabitEthernet0/0/1]quit

3、当前配置是否配置成功

dis cur

#
interface GigabitEthernet0/0/1
port link-type access
port default vlan 7
stp edged-port enable
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 7
stp edged-port enable
#
interface GigabitEthernet0/0/3
port link-type access
port default vlan 7
stp edged-port enable
#

4、端口批量创建vlan
[ServerHuiJu1]port-group 20 //创建端口组，名字叫20

[ServerHuiJu1-port-group-20]group-member GigabitEthernet 0/0/4 to GigabitEtherne
t 0/0/7 //将4到7号端口加到端口组10中

port link-type access //将端口设置成access口

[ServerHuiJu1-port-group-20]port default vlan 2 //划分到vlan2中

[ServerHuiJu1-port-group-20]quit

#
interface GigabitEthernet0/0/4
port link-type access
port default vlan 2
stp edged-port enable
#
interface GigabitEthernet0/0/5
port link-type access
port default vlan 2
stp edged-port enable
#
interface GigabitEthernet0/0/6
port link-type access
port default vlan 2
stp edged-port enable
#
interface GigabitEthernet0/0/7
port link-type access
port default vlan 2
stp edged-port enable
#


5、通过dis cur命令查看端口vlan划分确认无误后，对配置进行保存。
[ServerHuiJu1]quit

save
The current configuration will be written to the device.
Are you sure to continue?[Y/N]y


Now saving the current configuration to the slot 0..
Save the configuration successfully. //配置保存成功


6、进入系统模式（方括号），即可创建vlan等配置
sys
Enter system view, return user view with Ctrl+Z.
[ServerHuiJu1]

7、Telnet登陆密码
Admin@1234567890