交通运输专业交通拥堵收费和城市交通大学毕业论文英文文献翻译及原文

交通运输专业交通拥堵收费和城市交通大学毕业论文英文文献翻译及原文
交通运输专业交通拥堵收费和城市交通大学毕业论文英文文献翻译及原文

毕业设计(论文)

外文文献翻译

文献、资料中文题目:交通拥堵收费和城市交通

系统的可持续发展

文献、资料英文题目:

文献、资料来源:

文献、资料发表(出版)日期:

院(部):

专业:交通运输

班级:

姓名:

学号:

指导教师:

翻译日期: 2017.02.14

毕业设计(论文)外文资料翻译

学院:交通工程学院

专业:交通运输

外文出处:IEEE

附件: 1.外文资料翻译译文;2.外文原文。

注:请将该封面与附件装订成册。

附件1:外文资料翻译译文

交通拥堵收费和城市交通系统的可持续发展

摘要:城市化和机动化的快速增长,通常有助于城市交通系统的发展,是经济性,环境性和社会可持续性的体现,但其结果是交通量无情增加,导致交通拥挤。道路拥挤定价已经提出了很多次,作为一个经济措施缓解城市交通拥挤,但还没有见过在实践中广泛使用,因为道路收费的一些潜在的影响仍然不明。本文首先回顾可持续运输系统的概念,它应该满足集体经济发展,环境保护和社会正义的目标。然后,根据可持续交通系统的特点,使拥挤收费能够促进经济增长,环境保护和社会正义。研究结果表明,交通拥堵收费是一个切实有效的方式,可以促进城市交通系统的可持续发展。

一、介绍

城市交通是一个在世界各地的大城市迫切关注的话题。随着中国的城市化和机动化的快速发展,交通拥堵已成为一个越来越严重的问题,造成较大的时间延迟,增加能源消耗和空气污染,减少了道路网络的可靠性。在许多城市,交通挤塞情况被看作是经济发展的障碍。我们可以使用多种方法来解决交通挤塞,包括新的基础设施建设,改善基础设施的维护和操作,并利用现有的基础设施,通过需求管理策略,包括定价机制,更有效地减少运输密度。

交通拥堵收费在很久以前就已提出,作为一种有效的措施,来缓解的交通挤塞情况。交通拥堵收费的原则与目标是通过对选择在高峰拥挤时段的设施的使用实施附加收费,以纾缓拥堵情况。转移非高峰期一些出行路线,远离拥挤的设施或高占用车辆,或完全阻止一些出行,交通拥堵收费计划将在节省时间和降低经营成本的基础上,改善空气中的质量,减少能源消耗和改善过境生产力。此计划在世界很多国家和地方都有成功的应用。继在20世纪70年代初和80年代中期挪威与新加坡实行收费环,在2003年2月伦敦金融城推出了面积收费;直至现在,它都是已经开始实施拥挤收费的大都市圈中一个最知名的例子。

然而,交通拥堵收费由于理论和政治的原因未能在实践中广泛使用。道路收费

的一些潜在的影响尚不清楚,和城市发展的拥塞定价可持续性,需要进一步研究。

可持续发展通常作为运输政策的评估基本目标。可持续交通的想法已经出现在交通运输部门的可持续发展的概念中,可以定义如下,“可持续发展的交通基础设施和出行政策是服务于经济发展,环境管理和社会公平的多重目标,用这个目标来优化交通运输系统的使用,并达到经济和相关的社会和环境目标,以实现在不牺牲后代的能源的前提下,达到相同的目的。”可持续运输系统的要求是当前和未来几代的可持续发展的要求,即经济发展,环境保护和社会正义的主要支柱之间的动态平衡。

在可持续发展的运输系统背景下,拥挤收费如何能够促进经济增长,环境保护和社会正义,是本文研究的课题。本文的其余部分的结构如下。在第2节,对经济发展对交通挤塞定价的影响进行了阐述。第3节是对保护环境,社会正义和拥挤定价之间的关系进行了分析。有些结论是在第5节

二、经济发展

交通拥堵,造成旅行时间的增加,交通事故,能源消耗和环境恶化,已经造成了大量的经济损失。据报道,由交通挤塞所造成的经济损失在2003年的北京和上海占其国内生产总值的1 / 3,每年达4000万元。在许多危害中,交通拥堵已被视为经济发展的障碍。

任何可持续的交通管理政策应符合提高交通运输对经济发展的目标的影响,并且没有造成不利的环境影响和经济的进一步增长。那么拥塞的定价策略如何有效减少交通堵塞,减少污染物和温室气体排放,减少燃料使用,并减少当前交通运输系统的其他不利影响呢?

交通拥堵收费的基本经济原则,可以在图1所示。从理论上说,个人用户决定是否使用一个特定的道路的成本权衡他们将承担对自己的利益。社会总效益可以由下图1中的面积测量。 MPC的曲线表示用户成本只反映每个用户负担的成本为新用户(即“边缘”的用户)。然而,边际用户的场合,如空气污染,延迟给其他用户,他不承担额外的社会成本。每个边缘用户和他所造成的社会成本的负担的总成本是每次出行的边际社会成本。边际社会成本是由图1中的MSC曲线表示。

图1交通拥堵收费的影响

如果有?车辆在交通运输系统中,意味着用户的成本是由MPC表示,一个边际的用户将增加平均用户成本MPC +△MPC。因此,边际社会成本可以表述为:MSC=(N + 1)(MPC +ΔMPC) - nMPC = MPC +ΔMPC+nΔMPC

拥挤收费是交通需求管理的重要手段,最初只是影响交通出行的决定。实践证明拥挤收费能有效地规范交通出行时间和空间分布,促进道路资源的有效利用,提高运输业务的效率。在新加坡的拥塞定价实施表明,交通量下降了17%,在高峰时段,伦敦的经验也表明,定价方案是成功的。我们可以得出结论,减少交通挤塞,将促进经济的可持续发展。

收费会影响旅客的预算,将导致不仅在模式上的转换,而且是更广泛的经济变化,将伴随着地理再分配的过程。一些人担心,交通拥堵收费可能对中部地区的经济产生负面影响,特别是在零售方面。产生了相反的论调,不过,减少交通挤塞,应该是服务于更广泛的业务,以降低成本,使他们成为更具有竞争力的国家。零售活动的位置也是由个人首选的购物场所。众所周知,个人倾向于购买的商店在他们的居住地附近,因此零售企业不能轻易迁出核心区,因为许多人住在中心区。这种方便客户的依赖,解释了为什么零售生产跌幅小于核心区的其他主要行业的输出。

交通拥堵收费减少在繁忙时间的挤塞情况,并增加在其他时段的交通挤塞情况。通过向公共交通和大量出租车辆转向,交通拥堵收费降低所有时段定价领域人次。除减少交通挤塞,如果考虑到改善空气质量和减少燃料消耗等方面,交通拥堵收费形成的经济效益将是相当可观的。

三、环保

在中国,环境问题日益严重。据报道,中国是二氧化碳排放大国,有7个城市

在世界严重污染的城市名单中。交通运输对环境的影响,涵盖了不同的影响,包括空气污染,噪音,气候变化的范围,例如。汽车是城市空气和噪音污染的占主导地位的生产者,包括一氧化碳,氮氧化物和大气飘尘。这些污染物是关键因素,许多呼吸系统疾病,如哮喘,以及其他的影响人体健康的方面,如头疼,眼疾等症状。

据世界银行估计,在发展中国家,有0.5亿人每年死亡与于交通工具空气污染物排放有关,这是与交通事故类似的死亡人数,。

交通是不可替代的,因为它是生产链的一部分。出于这个原因,交通系统必须发展和标准化,运输服务的有效性,是必须增加的,同时必须减少或防止环境污染。

由于道路交通排放是一个复杂的系统,不能完全统一一个输出。从车辆样本分析不同的驾驶条件下的排放量这是自然的。加州空气资源委员会指出车辆的拥堵走走停停显著增加了排放量。作为一个例子,一个报告估计,10英里的路程,用普通的1987年的汽车,以55英里的速度运行HC排放废气的重量为1克,而HC在20英里的平均速度下的排放量是7克,典型的走走停停模式。

四、社会正义

可持续发展有三个广泛的目标:经济的可持续发展,环境保护和社会正义,这三个目标都要解决可持续发展这个问题。经济发展和环境保护的投入一直受到关注,但投入给社会正义的关注较少。社会正义(公平)包含的经济权益和环境权益。

经济公平的问题,造成交通拥堵收费是难以完全解决的。有些人认为道路收费是倒退,因为它更多地让承担较差的汽车用户,只需短距离行程的用户,或者是生活水平欠佳的用户,不管是什么原因,别无选择,只能乘车。这些参数可以通过制定更加灵活的收费制度,在一定程度上抵消。它已被接受的任何形式的道路收费将引入一些不公平现象。关键是要保持这些最低限度,并找到那些没有受益于交通拥堵收费的补偿方式。在实践中,收入最低的旅客,他们通常乘坐公共交通工具或徒步旅行,是最有可能受益的。

对于传统的运输系统,对汽油的税率是相同的,不管运输业的用户是否是在拥挤或非拥挤的时段行驶。拥挤收费是选择在交通高峰期间对拥挤设施的使用实施附加费,预计这样将减少这种不公平的

公平问题解决在运输已基本上涉及经济权益,包括公共交通和私人交通之间的

概率论毕业论文外文翻译

Statistical hypothesis testing Adriana Albu,Loredana Ungureanu Politehnica University Timisoara,adrianaa@aut.utt.ro Politehnica University Timisoara,loredanau@aut.utt.ro Abstract In this article,we present a Bayesian statistical hypothesis testing inspection, testing theory and the process Mentioned hypothesis testing in the real world and the importance of, and successful test of the Notes. Key words Bayesian hypothesis testing; Bayesian inference;Test of significance Introduction A statistical hypothesis test is a method of making decisions using data, whether from a controlled experiment or an observational study (not controlled). In statistics, a result is called statistically significant if it is unlikely to have occurred by chance alone, according to a pre-determined threshold probability, the significance level. The phrase "test of significance" was coined by Ronald Fisher: "Critical tests of this kind may be called tests of significance, and when such tests are available we may discover whether a second sample is or is not significantly different from the first."[1] Hypothesis testing is sometimes called confirmatory data analysis, in contrast to exploratory data analysis. In frequency probability,these decisions are almost always made using null-hypothesis tests. These are tests that answer the question Assuming that the null hypothesis is true, what is the probability of observing a value for the test statistic that is at [] least as extreme as the value that was actually observed?) 2 More formally, they represent answers to the question, posed before undertaking an experiment,of what outcomes of the experiment would lead to rejection of the null hypothesis for a pre-specified probability of an incorrect rejection. One use of hypothesis testing is deciding whether experimental results contain enough information to cast doubt on conventional wisdom. Statistical hypothesis testing is a key technique of frequentist statistical inference. The Bayesian approach to hypothesis testing is to base rejection of the hypothesis on the posterior probability.[3][4]Other approaches to reaching a decision based on data are available via decision theory and optimal decisions. The critical region of a hypothesis test is the set of all outcomes which cause the null hypothesis to be rejected in favor of the alternative hypothesis. The critical region is usually denoted by the letter C. One-sample tests are appropriate when a sample is being compared to the population from a hypothesis. The population characteristics are known from theory or are calculated from the population.

毕业论文外文翻译模板

农村社会养老保险的现状、问题与对策研究社会保障对国家安定和经济发展具有重要作用,“城乡二元经济”现象日益凸现,农村社会保障问题客观上成为社会保障体系中极为重要的部分。建立和完善农村社会保障制度关系到农村乃至整个社会的经济发展,并且对我国和谐社会的构建至关重要。我国农村社会保障制度尚不完善,因此有必要加强对农村独立社会保障制度的构建,尤其对农村养老制度的改革,建立健全我国社会保障体系。从户籍制度上看,我国居民养老问题可分为城市居民养老和农村居民养老两部分。对于城市居民我国政府已有比较充足的政策与资金投人,使他们在物质和精神方面都能得到较好地照顾,基本实现了社会化养老。而农村居民的养老问题却日益突出,成为摆在我国政府面前的一个紧迫而又棘手的问题。 一、我国农村社会养老保险的现状 关于农村养老,许多地区还没有建立农村社会养老体系,已建立的地区也存在很多缺陷,运行中出现了很多问题,所以完善农村社会养老保险体系的必要性与紧迫性日益体现出来。 (一)人口老龄化加快 随着城市化步伐的加快和农村劳动力的输出,越来越多的农村青壮年人口进入城市,年龄结构出现“两头大,中间小”的局面。中国农村进入老龄社会的步伐日渐加快。第五次人口普查显示:中国65岁以上的人中农村为5938万,占老龄总人口的67.4%.在这种严峻的现实面前,农村社会养老保险的徘徊显得极其不协调。 (二)农村社会养老保险覆盖面太小 中国拥有世界上数量最多的老年人口,且大多在农村。据统计,未纳入社会保障的农村人口还很多,截止2000年底,全国7400多万农村居民参加了保险,占全部农村居民的11.18%,占成年农村居民的11.59%.另外,据国家统计局统计,我国进城务工者已从改革开放之初的不到200万人增加到2003年的1.14亿人。而基本方案中没有体现出对留在农村的农民和进城务工的农民给予区别对待。进城务工的农民既没被纳入到农村养老保险体系中,也没被纳入到城市养老保险体系中,处于法律保护的空白地带。所以很有必要考虑这个特殊群体的养老保险问题。

毕业论文英文参考文献与译文

Inventory management Inventory Control On the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion. The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility. Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored: First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments . Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field of

(交通运输)公共场所双语标识英文译法第部分道路交通精编

(交通运输)《公共场所双语标识英文译法》第部分道 路交通

(交通运输)《公共场所双语标识英文译法》第部分道 路交通

公共场所双语标识英文译法 EnglishTranslationofPublicSigns 第1部分:道路交通 Part1:RoadSigns 1 范围 DB11/T334的本部分规定了北京市道路交通双语标识英文译法的原则。 本部分适用于北京市道路交通中的英文标识。 2 规范性引用文件 下列文件中的条款通过本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。 GB/T16159-1996汉语拼音正词法基本规则 3 术语和定义 下列术语和定义适用于本部分。 地名placenames 人们对各个地理实体赋予的专有名称。 地名专名specificnamesandterms 地名中用来区分各个地理实体的词。 地名通名commonnamesandterms 地名中用来区分地理实体类别的词。

4 总则 4.1 道路交通双语标识的英文译法应符合国际惯例,遵循英语习惯(见附录A)。 4.2 本部分汉语拼音用法应符合GB/T16159的要求。 5 细则 5.1 警告提示信息 警告提示信息的翻译应按照国际惯例,遵循英语习惯,如爬坡车道SteepGrade。 5.2 地名通名 5.2.1 壹般(基本)规定 地名通名通常采用英文直接翻译,英文单词首字母大写,其余小写。 5.2.2 街 5.2.2.1 Avenue(Ave)仅用于长安街CHANG’ANAve,平安大街PING’ANAve和俩广路LIANGGUANGAve。 5.2.2.2 街、大街译为Street(St),如隆福寺街LONGFUSISt,惠新东街HUIXINEastSt;西单北大街XIDANNorthSt,菜市口大街CAISHIKOUSt。 5.2.2.3 小街、条、巷、夹道壹般情况下译为Alley,当路宽达到壹定规模时可译为St,如东直门北小街DONGZHIMENNorthAlley,横壹条HENGYITIAOAlley,东四十条DONGSISHITIAOSt,后海夹道HOUHAIAlley;斜街译为Byway。 5.2.3 路 5.2.3.1 路译为Road(Rd),如白云路BAIYUNRd。 5.2.3.2 辅路译为SideRoad(SideRd),如京石高速辅路JINGSHIExpwySideRd。 5.2.3.3 高速公路译为Expressway(Expwy),如京津塘高速JINGJINTANGExpwy。

毕业论文外文翻译模版

吉林化工学院理学院 毕业论文外文翻译English Title(Times New Roman ,三号) 学生学号:08810219 学生姓名:袁庚文 专业班级:信息与计算科学0802 指导教师:赵瑛 职称副教授 起止日期:2012.2.27~2012.3.14 吉林化工学院 Jilin Institute of Chemical Technology

1 外文翻译的基本内容 应选择与本课题密切相关的外文文献(学术期刊网上的),译成中文,与原文装订在一起并独立成册。在毕业答辩前,同论文一起上交。译文字数不应少于3000个汉字。 2 书写规范 2.1 外文翻译的正文格式 正文版心设置为:上边距:3.5厘米,下边距:2.5厘米,左边距:3.5厘米,右边距:2厘米,页眉:2.5厘米,页脚:2厘米。 中文部分正文选用模板中的样式所定义的“正文”,每段落首行缩进2字;或者手动设置成每段落首行缩进2字,字体:宋体,字号:小四,行距:多倍行距1.3,间距:前段、后段均为0行。 这部分工作模板中已经自动设置为缺省值。 2.2标题格式 特别注意:各级标题的具体形式可参照外文原文确定。 1.第一级标题(如:第1章绪论)选用模板中的样式所定义的“标题1”,居左;或者手动设置成字体:黑体,居左,字号:三号,1.5倍行距,段后11磅,段前为11磅。 2.第二级标题(如:1.2 摘要与关键词)选用模板中的样式所定义的“标题2”,居左;或者手动设置成字体:黑体,居左,字号:四号,1.5倍行距,段后为0,段前0.5行。 3.第三级标题(如:1.2.1 摘要)选用模板中的样式所定义的“标题3”,居左;或者手动设置成字体:黑体,居左,字号:小四,1.5倍行距,段后为0,段前0.5行。 标题和后面文字之间空一格(半角)。 3 图表及公式等的格式说明 图表、公式、参考文献等的格式详见《吉林化工学院本科学生毕业设计说明书(论文)撰写规范及标准模版》中相关的说明。

java毕业论文外文文献翻译

Advantages of Managed Code Microsoft intermediate language shares with Java byte code the idea that it is a low-level language witha simple syntax , which can be very quickly translated intonative machine code. Having this well-defined universal syntax for code has significant advantages. Platform independence First, it means that the same file containing byte code instructions can be placed on any platform; atruntime the final stage of compilation can then be easily accomplished so that the code will run on thatparticular platform. In other words, by compiling to IL we obtain platform independence for .NET, inmuch the same way as compiling to Java byte code gives Java platform independence. Performance improvement IL is actually a bit more ambitious than Java bytecode. IL is always Just-In-Time compiled (known as JIT), whereas Java byte code was ofteninterpreted. One of the disadvantages of Java was that, on execution, the process of translating from Javabyte code to native executable resulted in a loss of performance. Instead of compiling the entire application in one go (which could lead to a slow start-up time), the JITcompiler simply compiles each portion of code as it is called (just-in-time). When code has been compiled.once, the resultant native executable is stored until the application exits, so that it does not need to berecompiled the next time that portion of code is run. Microsoft argues that this process is more efficientthan compiling the entire application code at the start, because of the likelihood that large portions of anyapplication code will not actually be executed in any given run. Using the JIT compiler, such code willnever be compiled.

毕业论文(英文翻译)排版格式

英文翻译说明 1. 英文翻译文章输成word,5号新罗马(New Times Roman)字体,1.5倍行间距,将来方便打印和一起装订;英文中的图表要重新画,禁止截图。 2. 整篇论文1.5倍行间距,打印时,用B5纸,版面上空2.5cm,下空2cm,左空2.5cm,右空2cm(左装订)。 3. 论文翻译后的摘要用五号宋体,正文小四号宋体、英文和数字用新罗马(New Times Roman)12、参考文献的内容用五号字体。图和表头用五号字体加粗并居中,图和表中的内容用五号字体。论文翻译的作者用五号字体加粗。 论文大标题………小三号黑体、加黑、居中 第二层次的题序和标题………小四号黑体、加黑、居中 第三层次的题序和标题………小四号宋体、加黑、居中 正文……………………………小四号宋体、英文用新罗马12 页码……………………………小五号居中,页码两边不加修饰符 4. 论文中参考文献严格按照下述排版。 专著格式:序号.编著者.书名[M].出版地: 出版社, 年代, 起止页码 期刊论文格式:序号.作者.论文名称[J]. 期刊名称, 年度, 卷(期): 起止页码 学位论文格式:序号.作者.学位论文名称[D]. 发表地: 学位授予单位, 年度 例子: (1).胡千庭, 邹银辉, 文光才等. 瓦斯含量法预测突出危险新技术[J]. 煤炭学报, 2007.32(3): 276-280. (2). 胡千庭. 煤与瓦斯突出的力学作用机理及应用研究[D]. 北京: 中国矿业大学(北京), 2007. (3). 程伟. 煤与瓦斯突出危险性预测及防治技术[M]. 徐州: 中国矿业大学出版社, 2003.

大学毕业论文---软件专业外文文献中英文翻译

软件专业毕业论文外文文献中英文翻译 Object landscapes and lifetimes Tech nically, OOP is just about abstract data typing, in herita nee, and polymorphism, but other issues can be at least as importa nt. The rema in der of this sect ion will cover these issues. One of the most importa nt factors is the way objects are created and destroyed. Where is the data for an object and how is the lifetime of the object con trolled? There are differe nt philosophies at work here. C++ takes the approach that con trol of efficie ncy is the most importa nt issue, so it gives the programmer a choice. For maximum run-time speed, the storage and lifetime can be determined while the program is being written, by placing the objects on the stack (these are sometimes called automatic or scoped variables) or in the static storage area. This places a priority on the speed of storage allocatio n and release, and con trol of these can be very valuable in some situati ons. However, you sacrifice flexibility because you must know the exact qua ntity, lifetime, and type of objects while you're writing the program. If you are trying to solve a more general problem such as computer-aided desig n, warehouse man ageme nt, or air-traffic con trol, this is too restrictive. The sec ond approach is to create objects dyn amically in a pool of memory called the heap. In this approach, you don't know un til run-time how many objects you n eed, what their lifetime is, or what their exact type is. Those are determined at the spur of the moment while the program is runnin g. If you n eed a new object, you simply make it on the heap at the point that you n eed it. Because the storage is man aged dyn amically, at run-time, the amount of time required to allocate storage on the heap is sig ni fica ntly Ion ger tha n the time to create storage on the stack. (Creat ing storage on the stack is ofte n a si ngle assembly in structio n to move the stack poin ter dow n, and ano ther to move it back up.) The dyn amic approach makes the gen erally logical assumpti on that objects tend to be complicated, so the extra overhead of finding storage and releas ing that storage will not have an importa nt impact on the creati on of an object .In additi on, the greater flexibility is esse ntial to solve the gen eral program ming problem. Java uses the sec ond approach, exclusive". Every time you want to create an object, you use the new keyword to build a dyn amic in sta nee of that object. There's ano ther issue, however, and that's the lifetime of an object. With Ian guages that allow objects to be created on the stack, the compiler determines how long the object lasts and can automatically destroy it. However, if you create it on the heap the compiler has no kno wledge of its lifetime. In a Ianguage like C++, you must determine programmatically when to destroy the

交通运输专业英语翻译汇总

Lesson1 to lesson3 Engine发动机 发动机充当动力装置。内燃机是最常见的:它通过在发动机汽缸里面燃烧一种液体燃料获得 动力。有2种形式的发动机:汽油机(也叫做火花点燃式发动机)和柴油机(也叫做压燃式 发动机)两种发动机均被称为热机,有燃烧的燃油产生热,引起气缸内气体的压力升高,并 输出动力使连接到传动系的轴旋转。 Suspension悬架 车桥和车轮通过悬架系统与底盘隔开。悬架系统的基本作用是吸收由不规则路面引起的振 动,从而有助于把车辆保持在一个受控的水平方向上,否则振动将传至车辆和车辆上的乘员。 Steering转向系 通过司机控制方向盘,转向系统为前轮转向提供手段。转向系统为减少转动方向盘所需的力 以及让车辆更易操纵提供了强力的帮助支持。 Brakes制动系 汽车上的制动系统有三个主要的功能。它必须能让车辆在必要时减速;它必须能让车辆在尽可能短 的一段距离内停下;它必须能让车辆保持怠速。由于制动器迫使固定表面(制动衬片)接触旋转表面 (鼓式或盘式)产生的摩擦力来完成刹车动作。 每个车轮具有一个鼓式或盘式制动总成,当驾驶员踩脚制动踏板时,靠液力产生制动 principle of operation 工作原理 这个发动机的四个行程见图2.2。在吸气行程开始时,进气阀打开活塞在汽缸中从上止点运 动到下止点。通过活塞运动产生的局部真空,导致空气燃油混合物通过进气歧管进入汽缸。 化油器提供正确比例的空气燃油混合物。当活塞运动到行程终点时进气阀关闭,因为两个阀 都关闭着,所以使得汽缸上端密封。 在图2.2b中,活塞正向上运动,压缩汽缸和活塞之间的燃油混合物至一个很小的体积,-- 这就是压缩行程。在到达上止点前,由火花塞电极产生的一个电火花,点燃了空气燃油混合 物。为了得到良好的性能,点火时刻必须精确控制。 随着空气燃油混合物燃烧,热空气膨胀气缸压力急剧上升,以致活塞被迫向汽缸下方运动。 使连杆对曲轴作用一个相当大的回转力。这就是燃烧行程,也叫做做功行程,见图2.2c。 一旦混合物燃烧,它必须尽可能快的从汽缸内排出,在排气行程中,上升着的活塞把热空 气和燃烧产物通过打开的排气阀和排气系统推出汽缸,排到空气中。 该行程依次按顺序连续循环,动力只在4个行程之一的燃烧行程传递给转轴。由于与曲轴

毕业论文5000字英文文献翻译

英文翻译 英语原文: . Introducing Classes The only remaining feature we need to understand before solving our bookstore problem is how to write a data structure to represent our transaction data. In C++ we define our own data structure by defining a class. The class mechanism is one of the most important features in C++. In fact, a primary focus of the design of C++ is to make it possible to define class types that behave as naturally as the built-in types themselves. The library types that we've seen already, such as istream and ostream, are all defined as classesthat is,they are not strictly speaking part of the language. Complete understanding of the class mechanism requires mastering a lot of information. Fortunately, it is possible to use a class that someone else has written without knowing how to define a class ourselves. In this section, we'll describe a simple class that we canuse in solving our bookstore problem. We'll implement this class in the subsequent chapters as we learn more about types,expressions, statements, and functionsall of which are used in defining classes. To use a class we need to know three things: What is its name? Where is it defined? What operations does it support? For our bookstore problem, we'll assume that the class is named Sales_item and that it is defined in a header named Sales_item.h. The Sales_item Class The purpose of the Sales_item class is to store an ISBN and keep track of the number of copies sold, the revenue, and average sales price for that book. How these data are stored or computed is not our concern. To use a class, we need not know anything about how it is implemented. Instead, what we need to know is what operations the class provides. As we've seen, when we use library facilities such as IO, we must include the associated headers. Similarly, for our own classes, we must make the definitions associated with the class available to the compiler. We do so in much the same way. Typically, we put the class definition into a file. Any program that wants to use our class must include that file. Conventionally, class types are stored in a file with a name that, like the name of a program source file, has two parts: a file name and a file suffix. Usually the file name is the same as the class defined in the header. The suffix usually is .h, but some programmers use .H, .hpp, or .hxx. Compilers usually aren't picky about header file names, but IDEs sometimes are. We'll assume that our class is defined in a file named Sales_item.h. Operations on Sales_item Objects

毕业论文 外文翻译#(精选.)

毕业论文(设计)外文翻译 题目:中国上市公司偏好股权融资:非制度性因素 系部名称:经济管理系专业班级:会计082班 学生姓名:任民学号: 200880444228 指导教师:冯银波教师职称:讲师 年月日

译文: 中国上市公司偏好股权融资:非制度性因素 国际商业管理杂志 2009.10 摘要:本文把重点集中于中国上市公司的融资活动,运用西方融资理论,从非制度性因素方面,如融资成本、企业资产类型和质量、盈利能力、行业因素、股权结构因素、财务管理水平和社会文化,分析了中国上市公司倾向于股权融资的原因,并得出结论,股权融资偏好是上市公司根据中国融资环境的一种合理的选择。最后,针对公司的股权融资偏好提出了一些简明的建议。 关键词:股权融资,非制度性因素,融资成本 一、前言 中国上市公司偏好于股权融资,根据中国证券报的数据显示,1997年上市公司在资本市场的融资金额为95.87亿美元,其中股票融资的比例是72.5%,,在1998年和1999年比例分别为72.6%和72.3%,另一方面,债券融资的比例分别是17.8%,24.9%和25.1%。在这三年,股票融资的比例,在比中国发达的资本市场中却在下跌。以美国为例,当美国企业需要的资金在资本市场上,于股权融资相比他们宁愿选择债券融资。统计数据显示,从1970年到1985年,美日企业债券融资占了境外融资的91.7%,比股权融资高很多。阎达五等发现,大约中国3/4的上市公司偏好于股权融资。许多研究的学者认为,上市公司按以下顺序进行外部融资:第一个是股票基金,第二个是可转换债券,三是短期债务,最后一个是长期负债。许多研究人员通常分析我国上市公司偏好股权是由于我们国家的经济改革所带来的制度性因素。他们认为,上市公司的融资活动违背了西方古典融资理论只是因为那些制度性原因。例如,优序融资理论认为,当企业需要资金时,他们首先应该转向内部资金(折旧和留存收益),然后再进行债权融资,最后的选择是股票融资。在这篇文章中,笔者认为,这是因为具体的金融环境激活了企业的这种偏好,并结合了非制度性因素和西方金融理论,尝试解释股权融资偏好的原因。

电子信息工程专业毕业论文外文翻译中英文对照翻译

本科毕业设计(论文)中英文对照翻译 院(系部)电气工程与自动化 专业名称电子信息工程 年级班级 04级7班 学生姓名 指导老师

Infrared Remote Control System Abstract Red outside data correspondence the technique be currently within the scope of world drive extensive usage of a kind of wireless conjunction technique,drive numerous hardware and software platform support. Red outside the transceiver product have cost low, small scaled turn, the baud rate be quick, point to point SSL, be free from electromagnetism thousand Raos etc.characteristics, can realization information at dissimilarity of the product fast, convenience, safely exchange and transmission, at short distance wireless deliver aspect to own very obvious of advantage.Along with red outside the data deliver a technique more and more mature, the cost descend, red outside the transceiver necessarily will get at the short distance communication realm more extensive of application. The purpose that design this system is transmit cu stomer’s operation information with infrared rays for transmit media, then demodulate original signal with receive circuit. It use coding chip to modulate signal and use decoding chip to demodulate signal. The coding chip is PT2262 and decoding chip is PT2272. Both chips are made in Taiwan. Main work principle is that we provide to input the information for the PT2262 with coding keyboard. The input information was coded by PT2262 and loading to high frequent load wave whose frequent is 38 kHz, then modulate infrared transmit dioxide and radiate space outside when it attian enough power. The receive circuit receive the signal and demodulate original information. The original signal was decoded by PT2272, so as to drive some circuit to accomplish

相关文档
最新文档